Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549



FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES EXCHANGE ACT OF 1934

FOR THE FISCAL YEAR ENDED JANUARY 31, 2011

Commission File No. 000-1409171

TITAN MACHINERY INC.
(Exact name of registrant as specified in its charter)

Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
  No. 45-0357838
(IRS Employer Identification No.)

644 East Beaton Drive
West Fargo, ND 58078-2648
(Address of Principal Executive Offices)

(701) 356-0130
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class: Common Stock, $0.00001 Par Value

Name of each exchange on which registered: The NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act: None



         Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No ý

         Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No ý

         Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No o

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o No o

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o   Accelerated filer ý   Non-accelerated filer o
(Do not check if a
smaller reporting company)
  Smaller reporting company o

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No ý

         The aggregate market value of our common stock held by non-affiliates as of July 31, 2010 was approximately $187.1 million (based on the last sale price of $14.27 per share on such date as reported on The NASDAQ Global Select Market).

         The number of shares outstanding of the registrant's common stock as of March 31, 2011 was 17,922,193 shares.

DOCUMENTS INCORPORATED BY REFERENCE

         Portions of the proxy statement for the registrant's 2011 Annual Meeting of Stockholders are incorporated by reference into Items 10, 11, 12, 13 and 14 of Part III of this report.


Table of Contents

 
   
  Page No.  

 

PART I

       

Item 1.

 

Business

    1  

Item 1A.

 

Risk Factors

    17  

Item 1B.

 

Unresolved Staff Comments

    23  

Item 2.

 

Properties

    23  

Item 3.

 

Legal Proceedings

    26  

Item 4.

 

(Removed and Reserved)

    26  

 

PART II

       

Item 5.

 

Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

    27  

Item 6.

 

Selected Financial Data

    29  

Item 7.

 

Management's Discussion and Analysis of Financial Condition and Results of Operations

    31  

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

    54  

Item 8.

 

Financial Statements and Supplementary Data

    55  

Item 9.

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

    90  

Item 9A.

 

Controls and Procedures

    90  

Item 9B.

 

Other Information

    90  

 

PART III

       

Item 10.

 

Directors, Executive Officers and Corporate Governance

    91  

Item 11.

 

Executive Compensation

    91  

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

    91  

Item 13.

 

Certain Relationships and Related Transactions, and Director Independence

    91  

Item 14.

 

Principal Accounting Fees and Services

    91  

 

PART IV

       

Item 15.

 

Exhibits, Financial Statement Schedules

    91  

        We make available, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act on our web site, http://www.titanmachinery.com, as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC. We are not including the information on our web site as a part of, or incorporating it by reference into, our Form 10-K.

i


Table of Contents

ITEM 1.    BUSINESS

Our Company

Overview

        We own and operate a network of full service agricultural and construction equipment stores in the United States. Based upon information provided to us by CNH Global N.V. or its U.S. subsidiary CNH America LLC, collectively referred to in this Form 10-K as CNH, we are the world's largest retail dealer of Case IH Agriculture equipment and a major retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the U.S. We have two primary business segments, Agriculture and Construction, within each of which we sell and rent new and used equipment, sell parts, and service the equipment in the areas surrounding our stores.

        The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment we sell and service includes heavy construction and light industrial machinery for commercial and residential construction, road and highway construction and mining. Within each of our operating segments, we engage in four principal business activities:

        The new equipment and parts we sell are supplied primarily by CNH. CNH is a leading manufacturer and supplier of agricultural and construction equipment, primarily through the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. We acquire used equipment for resale through trade-ins from our customers and selective purchases. We also sell parts and provide in-store and on-site repair and maintenance services. We also rent equipment and provide other ancillary services such as equipment transportation, Global Positioning System ("GPS") signal subscriptions and finance and insurance products.

        We offer our customers a one-stop solution by providing equipment and parts sales, repair and maintenance services and rental functions in each store. Our full service approach provides us with multiple points of customer contact and substantial cross-selling opportunities. We believe our mix of equipment and recurring parts and service sales enables us to operate effectively throughout economic cycles. We also believe our significant scale, superior customer service, diverse and stable customer base, proven management reporting system and experienced management team provide us with a competitive advantage in many of our local markets.

        Throughout our 31-year operating history we have built an extensive, geographically contiguous network of 81 stores, including two outlet stores. Our agricultural equipment stores are located in highly productive farming regions, including the Red River valley in eastern North Dakota and northwestern Minnesota, the western portions of the corn belt in Iowa, eastern South Dakota and southern Minnesota, and along the Interstate-80 corridor in Nebraska, which sits on top of the Ogallala Aquifer. Our construction equipment stores are located in North Dakota, South Dakota, Iowa, Montana, Wyoming, eastern Nebraska and western Minnesota.

        Our executives have extensive industry experience. David Meyer, our Chairman and Chief Executive Officer, founded our company in 1980. In 2002, we acquired two stores owned by C.I. Farm Power, Inc., a business owned by our President and Chief Operating Officer, Peter Christianson, which he co-founded in 1988. Based on our collective industry experience, we developed the Titan Operating Model, which combines management accountability and decision-making at the store level with

1


Table of Contents


centralized, back-office support. In addition, our executives work closely with our store managers to develop the managers' industry knowledge and ensure these managers achieve operational excellence in line with our management philosophy.

        We have a history of successful growth through acquisitions. Since January 1, 2003, we have completed 34 acquisitions consisting of 75 stores operating in seven states, including 19 acquisitions consisting of 44 stores completed since our initial public offering on December 11, 2007. We have a well-established track record of successfully integrating acquired stores through the Titan Operating Model, retaining acquired-store employees and maintaining acquired-store customer relationships. We expect that acquisitions will continue to be an important component of our consolidated and segment growth.

Industry Overview

Agricultural Equipment Industry

        Agricultural equipment is purchased primarily for the production of food, fiber, feed grain and renewable energy. It is also purchased for home and garden applications and maintenance of commercial, residential and government properties. Deere & Company, CNH and AGCO Corporation are the largest global manufacturers and supply a full line of equipment and parts that address the primary machinery requirements of farmers. For the most recent fiscal year-ends for which information is currently available, revenue from agriculture operations was $19.9 billion for Deere & Company, $11.5 billion for CNH and $6.9 billion for AGCO. In addition to the major manufacturers, several short-line manufacturers produce specialized equipment that addresses regional and niche requirements of farmers. Agricultural equipment manufacturers typically grant dealers in the U.S. authorized store locations, not exclusive territories, to distribute their products.

        We believe there are many factors that influence demand for agricultural equipment, parts and repair and maintenance services, including commodity prices, interest rates, general economic conditions and weather. Conditions can fluctuate drastically in a short time period, creating volatility in demand, especially for equipment, in a given year. Government subsidies also influence demand for agricultural equipment. Legislation, most notably the U.S. Farm Bill and the Farm Security and Rural Investment Act of 2002, attempts to stabilize the agriculture industry through U.S. Department of Agriculture ("USDA") subsidies. USDA subsidies include (i) commodity programs consisting of direct, counter-cyclical and price support payments to farmers; (ii) conservation programs; and (iii) disaster relief programs. We believe USDA subsidies reduce financial volatility and help ensure that farmers operate their farms and equipment during economic down cycles, thus stabilizing demand for equipment, replacement parts and repair and maintenance services.

Construction Equipment Industry

        Construction equipment is purchased primarily for commercial, residential and infrastructure construction, as well as for demolition, maintenance, mining, energy production and forestry operations. The market for construction equipment is larger than the market for agricultural equipment and is segmented across multiple categories including earth moving, lifting, light industrial, asphalt and paving, and concrete and aggregate equipment. We believe Caterpillar Inc., Komatsu Ltd., Deere & Company, CNH and Ingersoll-Rand Co. Ltd. are the largest global manufacturers of construction equipment. These companies generated revenue from their construction operations of $39.9 billion for Caterpillar Inc., $15.4 billion for Komatsu Ltd., $3.7 billion for Deere & Company, and $2.9 billion for CNH for the most recent fiscal year-ends for which information is currently available. As in the agricultural equipment market, distribution of construction equipment in the U.S. is executed primarily by manufacturer authorized dealers; however, manufacturers' dealership agreements in the construction industry typically assign exclusive distribution territories.

2


Table of Contents

        Construction machinery is generally divided into heavy and light subgroups. Heavy machinery includes large wheel loaders, large tracked excavators, cranes, crawler dozers, motor graders and articulated haul trucks. Light machinery includes backhoe landscape tractors, forklifts, compact excavators and skid steers. Heavy machinery is generally purchased by construction companies, municipalities, local governments, rental fleet owners, quarrying and mining companies, waste management companies and forestry-related organizations. Typically, light machinery is purchased by contractors, rental fleet owners, landscapers, logistics companies, farmers and recreational users. Although demand for construction equipment is affected by weather and seasonal factors, it is usually less susceptible to seasonal changes than the agricultural equipment industry.

        CNH and industry reports show demand for construction equipment in our markets is driven by several factors, one of which is public infrastructure spending, including roads and highways, sewer and water, as well as by public and private expenditures for the energy and mining industries. Demand for construction equipment is also driven by demand for fossil fuels, as well as metals and other commodities. We expect to benefit from the need for equipment to establish the infrastructure necessary to extract these natural resources, particularly in North Dakota, as consumer and wholesale consumption accelerates.

Titan Operating Model

        We believe the Titan Operating Model is a key element to our continued success. Through the Titan Operating Model, we empower leadership and share best practices at the store level while realizing efficiencies at the corporate level. We believe exceptional customer service is most efficiently delivered through accountable store employees who are supported by centralized administrative, finance and marketing functions. By managing our business as a network of independent stores supported by a centralized, shared resources group, we ensure coordination of the entire enterprise while promoting local business relationships on a store-by-store basis. We have implemented the Titan Operating Model in each of our reporting segments.

Strong Stores

        Each of our stores is run by a store manager who is reviewed and compensated based on the store's achievement of revenue, profitability, market share and balance sheet objectives. Also, each store is typically staffed by a parts manager, a service manager and field marketers, all of whom report directly to the store manager. Under our operating model, decision-making for customer-related issues is decentralized, with each store manager responsible for matters such as the type of equipment to stock, equipment pricing, customer credit approvals, staffing levels and customer satisfaction. This operating model enables each store manager to concentrate on customers' equipment, parts and service needs, while our shared resources group manages the administrative functions of the store. We believe customers in our industry view store managers and sales and service personnel as important partners in operating their businesses. Therefore, we believe developing and supporting strong store managers enables us to grow same-store sales through fostering new relationships and further developing existing relationships with our customers. In addition, we believe that choosing to centralize customer-related decision making at the corporate level risks undermining the partnership many customers seek to build with their dealer.

Shared Resources

        Our shared resources group provides a range of services to support our stores, including warranty and service administration, information technology support, administration, marketing campaigns, human resources management, finance and insurance, central purchasing, accounting, data administration and cash management. We believe these functions can be run more efficiently when combined and provide more sophisticated tools to our store managers than an independent dealership

3


Table of Contents


could support alone. We maintain accountability through our management reporting systems, which provide data on certain key operational and financial metrics on a daily basis, as well as a comprehensive review of financial performance on a monthly basis. We believe the services provided by our shared resources group enables our stores to achieve a higher level of customer service by freeing them from certain general and administrative functions and a more competitive market presence at a lower cost than would be feasible if our stores operated independently. Furthermore, as we acquire new stores, we believe the shared services required to support these stores will grow at a lower rate than our overall growth in store count.

Management Development and Succession Planning

        Our executives work closely with our regional and store managers and mid-level corporate managers to ensure the managers benefit from our executives' industry knowledge and execute operational excellence in line with our management philosophy. We also conduct formal meetings on a monthly basis with our store managers and regional managers to assess operational and financial objectives, develop near-term strategies and share best practices across the organization. We believe the relationships between our executives, regional managers, store managers and mid-level corporate managers will sustain our financial success through continued implementation of our effective operating model, by providing a strong pool of capable successors to our current team of executives, regional managers and store managers. Further, we seek to staff our stores with entrepreneurial individuals trained, including through our programs, and motivated to progress to higher level management positions. In addition, we sponsor programs with several technical colleges and community colleges that offer scholarships to students who will ultimately work for us in various capacities empowered with the basic knowledge and tools to succeed.

Business Strengths

        In addition to the Titan Operating Model, we believe the following attributes of our business model and market position are important factors in our ability to compete effectively and achieve our long-term financial objectives:

Leading North American Equipment Provider with Significant Scale

        According to CNH, we are the world's largest retail dealer of Case IH Agriculture equipment and a major retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the U.S. We believe our size and large, contiguous geographic market provide us with several competitive advantages including:

4


Table of Contents

Customer Focus at the Local Level

        As part of the Titan Operating Model, we centralize general and administrative functions and finance resources. This strategy enables our store employees to focus exclusively on customers and eliminates redundant operating expenses. We also centralize our marketing resources to offer our stores and field marketers professional marketing support that includes targeted direct mailings, advertising with targeted local media outlets, participation in and sponsorship of trade shows and industry events, our Titan Trader monthly magazine, and our hosting of open houses, service clinics, equipment demonstrations, product showcases and customer appreciation outings. We believe this operating structure, which focuses on serving our customers on a local level, will allow us to increase market share.

Superior Customer Service to Attract and Retain Customers

        We believe our ability to respond quickly to our customers' demands is a key to profitable growth. Our executives are committed to maintaining a customer-focused culture. We spend significant time and resources training our employees to effectively service our customers in each of our local markets, which we believe will increase our revenue. Our training program involves active participation in all manufacturer-sponsored training programs and the use of industry experts as consultants for customized training programs and a training team to assist in the integration of newly-acquired operations. We also partner with several technical colleges to sponsor students that we plan to ultimately employ. In particular, the following capabilities enable us to better service our customers:

Unique Entrepreneurial Culture to Attract and Retain Superior Employees

        We created a unique entrepreneurial culture that empowers our employees to make decisions and act within the parameters of a proven operating process and system. We believe this culture and our size gives us a competitive advantage in attracting and retaining the best employees in our industry. We developed an operating system and process that provides our employees with defined objectives and frequent feedback of results within an entrepreneurial environment that allows them to work independently yet consistently throughout our company. Through this operating system and process we have established defined financial metrics on a balanced scorecard, which is used monthly with each store manager to assess performance. Each store manager is empowered to operate the individual store as appropriate within the guidelines set by the operating system and process. This balanced management philosophy enables our employees to understand clearly how they succeed in our organization and how to interact with customers who expect a level of autonomy from our employees. Our compensation system focuses on rewarding our employees for high performance, thus enabling us to retain most of those employees who perform at or above expectations. This system also enables us to attract talented individuals outside of our industry and train them to perform at a high level within a relatively short period of time.

5


Table of Contents

Diverse and Stable Customer Base to Avoid Market Volatility

        We believe our large and diverse customer base limits our exposure to risks associated with customer concentration and fluctuations in local market conditions. We have long and stable relationships with many of our customers. During fiscal 2011, we conducted business with approximately 64,000 customers, none of whom accounted for more than 1.0% of our total revenue. Our top ten customers combined represented approximately 3.9% of our total revenue.

Proven Information Technology Systems

        Our management reporting systems provide the data and reports that facilitate our ability to make informed decisions. We use these systems to actively manage our business and enable each store to access the available inventory of our other stores before ordering additional parts or equipment from our suppliers. As a result, we minimize our investment in inventory while promptly satisfying our customers' parts and equipment needs. Our customer relationship management system provides sales and customer information and other organizational tools to assist our field marketers, parts managers and service managers. In addition, our management reporting systems facilitate training and foster development of management personnel.

Experienced Management Team to Implement our Growth Strategy

        Our executive team is led by David Meyer, our Chairman and Chief Executive Officer, and Peter Christianson, our President and Chief Operating Officer, who have approximately 36 and 32 years, respectively, of industry experience. Our regional managers, store managers and field marketers also have extensive knowledge and experience in our industry. In addition, we compensate, develop and review our regional managers and store managers based on an approach that aligns their incentives with the goals and objectives of our company, including achievement of revenue, profitability, market share and balance sheet objectives. We believe the strength of our management team will help our success in the marketplace.

Growth Strategy

        We pursue the following growth strategies:

Increase Market Share and Same-Store Sales

        We focus on increasing our share of the equipment sold in our markets because our market share impacts current period revenue and compounds our revenue over the life of the equipment sold through recurring parts and service business. We seek to generate same-store growth and increase market share through:

6


Table of Contents

Make Selective Acquisitions

        The agricultural and construction equipment industries are fragmented and consist of many relatively small, independent businesses servicing discrete local markets. We believe a favorable climate for dealership consolidation exists due to several factors, including the competitiveness of our industry, growing dealer capitalization requirements and lack of succession alternatives. We intend to continue to evaluate and pursue acquisitions with the objectives of entering new markets, consolidating distribution within our established network and strengthening our competitive position.

        We have a track record of completing and integrating acquisitions and have successfully used acquisitions to enter new markets. We look to add stores through acquisitions that offer attractive growth opportunities, high demand for the equipment we sell and services we offer, management strength, and contiguity with our existing geography. These factors have guided us to successful acquisition candidates. We believe our track record of successful acquisitions and expansion increases the probability that our future expansion will be profitable.

        We believe that we are effectively able to identify attractive acquisition candidates due to our leadership position in the industry, our track record of completing and integrating acquisitions, and our contacts in and knowledge of our industry and geographic region. We regularly assess the acquisition landscape, evaluating potential acquisition candidates in terms of their availability and desirability to our long-term growth strategy. In addition, we believe acquisition economics in our industry have been and will continue to be conducive to executing our long-term growth strategy. Typically, we acquire only the fixed assets, working capital and selected inventory we believe are necessary to run an efficient store based on the Titan Operating Model and assume only the liabilities related to financing the inventory and working capital acquired, although we sometimes acquire all the stock of a company. We, therefore, typically calculate our net purchase price of an acquisition as the value paid for the assets acquired less the amount of any liabilities assumed. Upon completion of an acquisition we seek to re-finance the inventory acquired according to the parts and floorplan financing parameters of the Titan Operating Model. We believe our management team's experience in evaluating potential acquisition candidates helps them determine whether a particular dealership can be successfully integrated into our existing operations and enables them to structure mutually beneficial purchase terms.

        The consent of CNH is required to acquire any CNH dealership, and the consent of the group of banks led by Wells Fargo Bank, National Association (the "Wells Fargo Bank Syndicate") is required for the acquisition of dealerships meeting certain thresholds or other criteria defined in our Senior Secured Credit Facility (the "Credit Agreement").

        The table below summarizes our acquisition of 34 dealers, totaling 75 stores, since January 1, 2003. Certain stores (designated with an *) are included in the Agriculture segment but also sell some construction equipment. See Item 2 for a listing of our current store locations.

7


Table of Contents

Agriculture Segment

Acquired Dealer
  Location of Stores

Titan Machinery, LLC
January 2003

  Watertown, South Dakota
Wahpeton, North Dakota
Casselton, North Dakota
Fargo, North Dakota

Consolidated Ag Service, Inc.
February 2004

 

Graceville, Minnesota
Marshall, Minnesota*
Pipestone, Minnesota

Smith International, Inc.
March 2005

 

Waverly, Iowa

H.C. Clark Implement Co., Inc.
May 2005

 

Aberdeen, South Dakota*

Vern Anderson, Inc.
November 2005

 

Anthon, Iowa
Cherokee, Iowa
Kingsley, Iowa
Le Mars, Iowa

Walterman Implement, Inc.
November 2005

 

Dike, Iowa

Farm Power, Inc. of Minnesota and related entities
March 2006

 

Elbow Lake, Minnesota
Fergus Falls, Minnesota

Richland County Implement, Inc.
February 2007

 

Wahpeton, North Dakota

Aberdeen Equipment Co., Huron Equipment Co. and
Redfield Equipment Co.
April 2007

 

Aberdeen, South Dakota*
Huron, South Dakota
Redfield, South Dakota

Red Power International, Inc.
August 2007

 

Ada, Minnesota
Crookston, Minnesota*

Twin City Implement, Inc.
November 2007

 

Mandan, North Dakota*

Reiten & Young International, Inc.
December 2007

 

Grand Forks, North Dakota*

Avoca Operations, Inc. and Greenfield Operations, Inc.
January 2008

 

Avoca, Iowa
Greenfield, Iowa

Ceres Equipment Inc.
February 2008

 

Roseau, Minnesota

Quad County Implement, Inc.
May 2008

 

Blairstown, Iowa

8


Table of Contents

Acquired Dealer
  Location of Stores

Wolf's Farm Equipment, Inc.
September 2008

 

Kintyre, North Dakota

Pioneer Garage, Inc.
October 2008

 

Pierre, South Dakota
Highmore, South Dakota
Miller, South Dakota

Anderson Power and Equipment, Inc.
December 2008

 

Thief River Falls, Minnesota

Winger Implement, Inc.
May 2009

 

Winger, Minnesota

Arthur Mercantile Company
May 2009

 

Arthur, North Dakota

Valley Equipment, Inc.
June 2009

 

Mayville, North Dakota

Lickness Bros. Implement Co.
August 2009

 

Britton, South Dakota

Oskaloosa Implement Co.
November 2009

 

Pella, Iowa
Oskaloosa, Iowa

Valley Farm Equipment, Inc.
November 2009

 

Milbank, South Dakota

Hubbard Implement, Inc.
June 2010

 

Iowa Falls, Iowa

Fairbanks International Inc.
December 2010

 

Grand Island, Nebraska
Kearney, Nebraska
Lexington, Nebraska
Holdrege, Nebraska
Hastings, Nebraska
North Platte, Nebraska

Tri-State Implement, Inc.
February 2011

 

Sioux Falls, South Dakota

Schoffman's, Inc.
March 2011

 

Redwood Falls, Minnesota

9


Table of Contents

Construction Segment

Acquired Dealer
  Location of Stores

Krider Equipment Co., Inc.
January 2003

  Fargo, North Dakota
Bismarck, North Dakota

Fargo Tractor & Equipment, Inc.
January 2003

 

West Fargo, North Dakota

Piorier Equipment Company, Inc. and related entities
June 2006

 

Sioux City, Iowa
Marshall, Minnesota
Rapid City, South Dakota
Sioux Falls, South Dakota

Mid-Land Equipment Company, L.C.
May 2008

 

Des Moines, Iowa
Davenport, Iowa
Clear Lake, Iowa
Cedar Rapids, Iowa
Omaha, Nebraska
Lincoln, Nebraska

Western Plains Machinery Co. and WP Rentals LLC
December 2008

 

Billings, Montana (2 stores)
Belgrade, Montana
Great Falls, Montana
Missoula, Montana
Columbia Falls, Montana
Cheyenne, Wyoming
Casper, Wyoming
Gillette, Wyoming

ABC Rental & Equipment Sales
April 2011

 

Williston, North Dakota
Bozeman, Montana
Missoula, Montana
Big Sky, Montana

Integrate New Dealers into the Titan Operating Model

        We have developed the Titan Operating Model to optimize the performance and profitability of each of our stores. Upon consummation of each acquisition, we integrate acquired stores into our operations by implementing the Titan Operating Model to enhance each acquired store's performance within its target market. We generally complete integration of a store within 18 months, although it may take several years before acquired stores fully realize the benefits of the Titan Operating Model. We believe the Titan Operating Model provides us with multiple points of customer contact, creates cross-selling opportunities, fosters strong customer relationships and supports a culture of individual accountability that increases our revenue and provides a strong platform for future growth.

Suppliers

CNH—Case IH Agriculture, Case Construction, New Holland Agriculture and New Holland Construction

        We have a longstanding relationship with CNH and, according to CNH, are the world's largest retail dealer of Case IH Agriculture equipment. We have been an authorized dealer of Case agricultural equipment since our inception in 1980 and added the other CNH brands as Case grew, acquired other brands and merged with New Holland in 1999 to form CNH. CNH supplied, through CNH America LLC, CNH's U.S. manufacturing entity, approximately 82.5% of the new agricultural equipment and 71.3% of the new construction equipment we sold in fiscal 2011.

10


Table of Contents

        CNH is a global leader in the agricultural and construction equipment industries based on the number of units sold. In 2010, CNH had $15.6 billion in worldwide revenue, with agricultural equipment accounting for approximately 74% and construction equipment accounting for approximately 19% of CNH's total revenue. In addition, CNH provides financing and insurance products and services to its end-user customers and authorized dealers through its CNH Capital America LLC ("CNH Capital") business unit. CNH is a publicly-traded company and a majority-owned subsidiary of Fiat Industrial S.p.A.

        CNH is the world's second largest manufacturer of agricultural equipment. CNH owns and operates the Case IH Agriculture and New Holland Agriculture brands. Case IH Agriculture, recognized by the red color of its equipment, possesses over 160 years of farm equipment heritage. New Holland Agriculture, recognized by the blue color of its tractors and the yellow color of its harvesting and hay equipment, has over 100 years of farm equipment industry experience. CNH's agricultural equipment dealers are assigned authorized store locations but do not have exclusive territories.

        CNH is one of the world's largest manufacturers of construction equipment in terms of market share, owning and operating the Case Construction, New Holland Construction and Kobelco brands. CNH's construction equipment dealers are assigned a specific geographic area of responsibility, which typically includes an entire state, within which the dealers have the right to sell new Case Construction, New Holland Construction and/or Kobelco equipment.

        We have entered into separate dealership agreements with certain CNH entities to sell the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. These dealer agreements authorize us to sell CNH equipment and parts and entitle us to use CNH trademarks and trade names, with certain restrictions. The CNH entities have the right to terminate their dealer agreements with us immediately in certain circumstances, including if a person acquires 20% or more of our common stock without CNH's consent, and, in some cases, for any reason 90 days following written notice. The dealership agreements and industry practices generally provide that payment on equipment and parts purchased from CNH entities is due within 30 days and is typically subject to floorplan financing as discussed below. With respect to sales of equipment, payments from customers, which are typically financed by a third party, are due upon sale. Payments from customers for parts and services are due within 30 days. CNH makes available to us any floorplans, parts return programs, sales or incentive programs or similar plans or programs it offers to other dealers, and provides us with promotional items and marketing materials.

        Based upon information provided to us by CNH, we are the world's largest retail dealer of Case IH Agriculture equipment and a major retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the U.S. Thus, our relationship with CNH entities is more than a typical supply relationship; it is strategic for both our company and CNH. In that regard, it is in our mutual interests to maintain the strong longstanding relationship we share.

Other Suppliers

        In addition to products supplied by CNH, we sell a variety of new equipment, parts and attachments from other manufacturers. These products tend to address specialized niche markets and complement the CNH products we sell by filling gaps in the CNH line of products. We believe our offering of products for specialized niche markets supports our goal of being a one-stop solution for equipment needs at each of our stores. Approximately 18.6% of our total new equipment sales in fiscal 2011 resulted from sales of products manufactured by companies other than CNH, with our single largest manufacturer other than CNH representing less than 3.1% of our total new equipment sales. The terms of our arrangements with these other suppliers vary, but most of the dealership agreements contain termination provisions allowing the supplier to terminate the agreement after a specified notice

11


Table of Contents


period, which is typically 30 days. Payment and financing practices with these other suppliers are similar to those practices described above with respect to CNH entities.

Operating Segments, Products and Services

        We operate our business in two reportable segments, Agriculture and Construction. Within each of our Agriculture and Construction segments, we have four principal sources of revenue: new and used equipment sales, parts sales, repair and maintenance service and equipment rental and other business activities. See Note 16 to our consolidated financial statements included elsewhere in this annual report for additional information regarding our segments.

Equipment Sales

        We sell new agricultural and construction equipment manufactured under the CNH family of brands as well as equipment from a variety of other manufacturers. The used equipment we sell is from inventory acquired through trade-ins from our customers and selective purchases. The agricultural equipment we sell and service includes application equipment and sprayers, combines and attachments, hay and forage equipment, planting and seeding equipment, precision farming technology, tillage equipment, and tractors. The construction equipment we sell and service includes articulated trucks, compact track loaders, compaction equipment, cranes, crawler dozers, excavators, forklifts, loader/backhoes, loader/tool carriers, motor graders, skid steer loaders, telehandlers and wheel loaders. We sell new and used equipment through our professional, in-house retail sales force, which is organized by geography and operating segment. We also sell used equipment through our outlet stores. We believe this organizational structure improves the effectiveness of our sales force, better serves our customers and helps us negotiate advantageous trade-in purchase terms. Equipment sales generate cross-selling opportunities for us by populating our markets with equipment we repair and maintain and for which we sell parts. For the year ended January 31, 2011, equipment revenue was $855.4 million, representing 78.2% of total revenue for the period.

Parts Sales

        We sell a broad range of maintenance and replacement parts on equipment that we sell, as well as other types of equipment. We maintain an extensive in-house parts inventory to provide timely parts and repair and maintenance support to our customers. We generally are able to acquire out-of-stock parts directly from manufacturers within two business days. Our parts sales provide us with a relatively stable revenue stream that is less sensitive to economic cycles than our equipment sales and rental operations. For the year ended January 31, 2011, parts revenue was $141.0 million, representing 12.9% of total revenue for the period.

Repair and Maintenance Services

        We provide repair and maintenance services, including warranty repairs, for our customers' equipment. Each of our stores includes service bays staffed by trained service technicians. Our technicians are also available to make on-site repairs. In addition, we provide proactive and comprehensive customer service by maintaining service histories for each piece of equipment owned by our customers, maintaining 24/7 service hours in times of peak service usage, providing on-site repair services, scheduling off-season maintenance activities with customers, notifying customers of periodic service requirements and providing training programs to customers to educate them as to standard maintenance requirements. At the time equipment is purchased, we also offer customers the option of purchasing extended warranty protection provided by our suppliers. Our after-market services have historically provided us with a high-margin, relatively stable source of revenue through changing economic cycles. For the year ended January 31, 2011, service revenue was $74.5 million, representing 6.7% of total revenue for the period.

12


Table of Contents

Equipment Rental and Other Business Activities

        We rent equipment to our customers on a short-term basis for periods ranging from a few days to a few months. We actively manage the size, quality, age and composition of our rental fleet and use our information technology systems to closely monitor and analyze customer demand and rate trends. We maintain the quality of our fleet through our on-site parts and services support and dispose of rental equipment through our retail sales force. Our rental business creates cross-selling opportunities for us in equipment sales. In addition, we provide ancillary equipment support activities such as equipment transportation, GPS signal subscriptions in connection with precision farming and reselling CNH Capital finance and insurance products. For the year ended January 31, 2011, other revenue was $23.6 million, representing 2.2% of total revenue for the period.

Customers

        We serve over 49,000 Agriculture customers in the U.S., primarily in North Dakota, South Dakota, Minnesota, Iowa and Nebraska. Our customers vary from small, single machine owners to large farming operations. In fiscal 2011, no single customer accounted for more than 1.0% of our Agriculture revenue and our top ten customers combined accounted for approximately 4.4% of our total Agriculture revenue.

        We serve over 15,000 Construction customers in the U.S., primarily in North Dakota, South Dakota, Minnesota, Iowa, Nebraska, Wyoming and Montana. Our customers include a wide range of construction contractors, public utilities, municipalities and maintenance contractors. They vary from small, single machine owners to large contracting firms that operate under sophisticated capital equipment and maintenance budgets. In fiscal 2011, no single customer accounted for more than 1.0% of our Construction revenue and our top ten customers combined accounted for approximately 5.3% of our total Construction revenue.

        Our stores enable us to closely service local and regional customers. We believe the Titan Operating Model enables us to satisfy customer requirements and increase revenue through cross-selling opportunities presented by the various products and services that we offer. In addition to our U.S. customers, we sell equipment on a limited basis to international customers, primarily in Eastern Europe. Our U.S. customers primarily finance their equipment purchases through CNH Capital.

Floorplan Financing

        We attempt to maintain at each store, or have readily available at other stores in our network, sufficient inventory to satisfy customer needs. Inventory levels fluctuate throughout the year and tend to increase before the primary sales seasons for agricultural equipment. The cost of financing our inventory is an important factor affecting our financial results.

CNH Capital

        CNH Capital offers floorplan financing to CNH dealers for extended periods to finance products from both CNH and other suppliers. CNH Capital provides this financing in part to enable dealers to carry representative inventories of equipment and encourage the purchase of goods by dealers in advance of seasonal retail demand. CNH Capital charges variable market rates of interest based on the prime rate on balances outstanding after any interest-free periods and retains a security interest in all of our assets, including inventories, which it inspects periodically. The interest-free periods, which CNH offers periodically in the form of additional incentives or special offers, typically average four months for new and used agriculture equipment and new construction equipment. CNH Capital also provides financing for used equipment accepted in trade, repossessed equipment and approved equipment from other suppliers, and receives a security interest in such equipment.

13


Table of Contents

Other Financing Sources for Equipment

        In addition to the financing provided by CNH Capital, financing also may be available through floorplan financing programs provided by the suppliers, which may be financed by such suppliers themselves or through third party lenders.

Other Financing

        We have a Credit Agreement with the Wells Fargo Bank Syndicate, which includes a $175.0 million wholesale floorplan line of credit to finance equipment inventory purchases.

Sales and Marketing

        As part of the Titan Operating Model, we have centralized sales support and marketing management. All of our stores benefit from our centralized media buys, strategic planning, sales support and training, and we provide our store managers and their sales teams with flexibility to localize sales and marketing.

        We currently market our products and services through:

Field Marketers

        Our field marketers perform a variety of functions, such as servicing customers at our stores, calling on existing customers and soliciting new business at farming, construction and industrial sites. These field marketers target customers in specific areas, and we develop customized marketing programs for our sales force by analyzing each customer group for profitability, buying behavior and product selection. All members of our sales force are required to attend frequent in-house training sessions to develop product and application knowledge, sales techniques and financial acumen. Our sales force is supported by our corporate marketing department.

Parts Counter and Service Managers

        Our parts counter and service managers are involved in our uptime service efforts, taking advantage of our seasonal marketing campaigns in parts and service sales. As a group, they have won multiple awards from our suppliers for their efforts benefiting both our customers and our key strategic partners.

Print, Broadcast and Web-Based Advertising Campaigns

        Each year we initiate several targeted direct mail, print and broadcast advertising and marketing campaigns. CNH and other suppliers periodically provide us with advertising funds, which we primarily use to promote new equipment, parts and financing programs. We will continue to explore and launch additional sales channels as appropriate, including, for example, new internet-based efforts.

Remarketing Division

        Our remarketing division capitalizes on sales opportunities for aged used agricultural and construction equipment transferred out of our retail stores. We have opened two outlet stores that sell used equipment. In addition, we are actively engaged in marketing equipment through our website.

14


Table of Contents

Competition

        The agricultural and construction equipment sales and distribution industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local scale. Our competitors range from multi-location, regional operators to single-location, local dealers and include dealers and distributors of competing equipment brands, including John Deere, Caterpillar and the AGCO family of brands, as well as other dealers and distributors of the CNH family of brands. Competition among equipment dealers, whether they offer agricultural or construction products or both, is primarily based on the price, value, reputation, quality and design of the products offered by the dealer, the customer service and repair and maintenance service provided by the dealer, the availability of equipment and parts and the accessibility of stores. While we believe we compete favorably on each of the identified competitive factors, our sales and margins may be impacted depending on (i) the extent of aggressive pricing competition through manufacturer discount programs or other competitive pricing tactics, (ii) our ability to obtain higher service gross margins based on our service quality and reputation and (iii) our ability to attract new and maintain existing customers based on the availability and quality of the products we offer and our local relationship and reputation.

        The number of agricultural and construction equipment dealers operating on a regional scale is limited and we are one of the principal regional-scale agricultural and construction equipment dealers in the U.S. The primary regional-scale equipment dealers with whom we compete include RDO Equipment Co., Butler Machinery, Ziegler Inc. and Brandt Holdings Co. RDO Equipment Co. is a John Deere agricultural and construction equipment dealer with 59 locations in nine states, including North Dakota, South Dakota, Minnesota and Montana. Butler Machinery is a Caterpillar construction and agriculture equipment dealer with 12 locations in North Dakota and South Dakota. Ziegler Inc. is a Caterpillar construction and agriculture equipment dealer with 20 locations in three states, including Minnesota and Iowa. Brandt Holdings owns John Deere, Vermeer and Bobcat construction and agricultural equipment dealers with 32 locations in 11 states including Iowa, Minnesota, Nebraska, North Dakota, and South Dakota.

Information Technology Systems

        We currently use an integrated management reporting system developed and supported by Dealer Information Systems Corporation to manage our operating information. We are in the process of implementing a new enterprise resource planning ("ERP") system that will replace our current management reporting system. Our information system enables us to closely monitor our performance and actively manage our business on a consolidated and segment basis and includes features that were enhanced to support the Titan Operating Model, including detailed store-based financial reporting, inventory management and customer relationship management.

        Through our information system we maintain a complete database on inventory of parts and equipment and a centralized inventory control system for each segment. Our system enables each store to access the available inventory of our other stores before ordering additional parts or equipment from our suppliers. We are also able to monitor inventory levels and mix at each store and make adjustments in accordance with our operating plan. Finally, our system is externally connected to CNH, enabling us to locate CNH equipment and parts inventories, and communicate with other CNH dealers.

        Our customer relationship management system provides sales and customer information and other organizational tools to assist our sales force. We maintain an extensive customer database that allows us to monitor the status and maintenance history of our customers' equipment and enables us to more effectively provide parts and services to meet their needs. We also use our relationship management information system and customer database to monitor sales information and customer demand.

        The data we store in our information system is backed-up on a daily basis and stored at an off-site location. Thus, if our system were to become inoperable, we would be able to continue operations through an off-site data center. Further, we own the software and hardware necessary to operate this system and have employees trained to manage and maintain the software without reliance on external support.

15


Table of Contents

Corporate Information

        We were incorporated as a North Dakota corporation in 1980 and reincorporated in Delaware in December 2007 prior to our initial public offering. Our executive offices are located at 644 East Beaton Drive, West Fargo, ND 58078-2648. Our telephone number is (701) 356-0130. We maintain a web site at www.titanmachinery.com.

Intellectual Property

        We do not have any registered intellectual property. Case IH, Case and New Holland are registered trademarks of CNH, which we use in connection with advertisements and sales as authorized under our dealership agreements. We license trademarks and trade names of new equipment obtained from suppliers other than CNH from their respective owners. We operate each of our stores under either the Titan Machinery name or, if there was strong local name recognition and customer loyalty at a location we acquired, the name historically used by the dealership in that location for a transition period, the length of which can vary depending upon the location.

Product Warranties

        Product warranties for new equipment and parts are provided by our suppliers. The term and scope of these warranties vary greatly by supplier and by product. At the time equipment is purchased, we also offer customers the option of purchasing extended warranty protection provided by our suppliers. Suppliers pay us for repairs we perform to equipment under warranty. We generally sell used equipment "as is" and without manufacturer's warranty, although manufacturers sometimes provide limited warranties if the supplier's original warranty is transferable and has not expired. Typically, we provide no additional warranties on used equipment.

Seasonality

        Our quarterly operating results are subject to fluctuation due to varying weather patterns, which may impact the timing and amount of equipment purchases, rentals, and after-sales parts and service purchases by our Agriculture and Construction customers.

Employees

        As of April 1, 2011, we employed 1,596 full-time and 278 part-time employees. None of our employees is covered by a collective bargaining agreement. We believe our relations with our employees are good.

Governmental Regulation

        We are subject to numerous federal, state, and local rules and regulations, including regulations promulgated by the Environmental Protection Agency and similar state agencies, with respect to storing, shipping, disposing, discharging and manufacturing hazardous materials and hazardous and non-hazardous waste. These activities are associated with the repair and maintenance of equipment at our stores. Currently, none of our stores or operations exceeds small quantity generation status. Compliance with these rules and regulations has not had any material effect on our operations, nor do we expect it to in the future. Further, we have not made, and do not anticipate making, any material capital expenditures related to compliance with environmental regulations. However, there can be no assurance that these expectations are accurate, particularly if regulations change, unforeseen incidents occur or unknown past contamination or non-compliance is discovered, among other similar events.

16


Table of Contents

ITEM 1A.    RISK FACTORS

We are substantially dependent upon our relationship with CNH.

        We are an authorized dealer of CNH agricultural and construction equipment and parts. In fiscal 2011, CNH supplied approximately 82.5% of the new agricultural equipment and 71.3% of the new construction equipment we sold and represented a significant portion of our parts revenue. Our acquisition strategy contemplates the acquisition of additional CNH geographic areas of responsibility and store locations in both the Agricultural and Construction equipment segments. We depend on CNH Capital for floorplan financing to purchase a substantial portion of our inventory. In addition, CNH Capital provides a significant percentage of the financing used by our customers to purchase CNH equipment from us. CNH also provides incentive programs and discount programs from time to time that enable us to price our products more competitively. In addition, CNH conducts promotional and marketing activities on national, regional and local levels. Due to our substantial dependence on CNH, our success depends, in significant part, on (i) the overall reputation and success of CNH; (ii) the availability and terms of floorplan financing and customer financing from CNH Capital; (iii) the incentive and discount programs provided by CNH and its promotional and marketing efforts for its agricultural and construction products; (iv) the goodwill associated with CNH trademarks; (v) the introduction of new and innovative products by CNH; (vi) the manufacture and delivery of competitively-priced, high quality equipment and parts by CNH in quantities sufficient to meet our customers' requirements on a timely basis; (vii) the quality, consistency and management of the overall CNH dealership system; and (viii) the ability of CNH to manage its risks and costs, including those associated with being a multinational company. If CNH does not provide, maintain or improve any of the foregoing, or if CNH were sold or reduced or ceased operations, there could be a material adverse effect on our financial condition and results of operations.

CNH may terminate its dealership agreements with us or change the terms of those agreements, which could adversely affect our business.

        Under our dealership agreements with CNH through CNH America LLC, CNH's U.S. manufacturing entity, CNH entities have the right to terminate these agreements immediately in certain circumstances, and, in some cases, for any reason 90 days following written notice. Furthermore, CNH entities may change the terms of their agreements with us, among other things, to change our sales and service areas and/or the product, pricing or delivery terms. CNH routinely conducts evaluations of dealership standards, customer satisfaction surveys and market share studies, the results of which can impact the relationships with its dealers. CNH uses the evaluation results to increase or decrease the monetary rewards to dealers, or limit or expand the availability of financing, warranty reimbursements or other marketing incentives. If CNH were to change the terms of any or all of these agreements in a manner that adversely affects us, our business may be harmed, and if CNH were to terminate all or any of its dealer agreements with us, our business would be severely harmed.

Restrictions in our CNH dealership agreements may significantly affect our operations and growth and prevent a change in control of our company.

        We operate our stores pursuant to CNH's customary dealership agreements. These agreements impose a number of restrictions and obligations on us with respect to our operations, including our obligations to actively promote the sale of CNH equipment within our designated geographic areas of responsibility, fulfill the warranty obligations of CNH, provide services to our customers, maintain sufficient parts inventory to service the needs of our customers, maintain inventory in proportion to the sales potential in each sales and service geographic area of responsibility, maintain adequate working capital and maintain stores only in authorized locations. Prior consent of CNH is required for the acquisition by another party of 20% or more of our outstanding stock and for our acquisition of other CNH dealerships; otherwise, CNH may terminate our dealership agreements. There can be no

17


Table of Contents


assurance that CNH will give its consent. The restrictions and obligations in our CNH dealership agreements limit our flexibility in operating our current stores and acquiring new stores, which could have an adverse effect on our operations and growth. Furthermore, the requirement that CNH consent to the acquisition by any party of 20% or more of our outstanding stock may have the effect of discouraging transactions involving a change in our control, including transactions that stockholders might deem to be in their best interests.

Our equipment dealer appointments are not exclusive to the geographic areas we serve, which could adversely affect our operations and financial condition.

        CNH could appoint other equipment dealers in close proximity to our existing stores. The sales and service geographic areas of responsibility assigned to our dealerships can be enlarged or reduced by CNH upon 30 days' prior written notice. CNH and other equipment dealers can also sell in our sales and service geographic areas of responsibility. To the extent CNH appoints other equipment dealers within our markets, enlarges or reduces the sales and service geographic areas of responsibility relating to our stores, amends the dealership agreements or imposes new or different terms or conditions under the dealer agreements, our operations and financial condition could be adversely affected.

Our operating results may be adversely impacted by an under-supply or over-supply of equipment.

        If our suppliers cannot continue to provide us a reliable supply of new equipment, we may not be able to meet our customers' demand and our operating results could be negatively impacted. In times of heightened global demand for equipment, which is often driven by other factors (e.g., farm cash receipts often drive demand for agricultural equipment and infrastructure development often drives construction equipment demand), equipment suppliers may experience difficulty providing all dealerships a reliable supply of new agricultural equipment, which could adversely impact our results of operations. Further, an under-supply of equipment may cause prices for such equipment to increase. To the extent we cannot pass on any increased costs of equipment to our customers, our operating results may suffer. Conversely, an industry over-supply of equipment may also adversely affect our operations. Though manufacturers typically manage production of new equipment in response to demand, there may be short-term under-supplies or over-supplies of new equipment as manufacturers adjust to industry demand fluctuations. For used and rental equipment, short-term lease programs and commercial rental agencies for construction and agricultural equipment have expanded significantly in North America. Nationwide rental conglomerates have become sizeable purchasers of new equipment and can have a significant impact on industry sales and margins. When equipment comes off of lease or is replaced with newer equipment by rental agencies, there may be a significant increase in the availability of late-model used equipment. An over-supply of used equipment could adversely affect demand for, or the market prices of, new and used equipment. In addition, a decline in used equipment prices could have an adverse effect on residual values for leased equipment, which could adversely affect our financial performance.

If our acquisition plans are unsuccessful, we may not achieve our planned revenue growth.

        We believe a significant portion of our future growth will depend on our ability to acquire additional dealerships. Our ability to continue to grow through the acquisition of additional CNH geographic areas of responsibility and store locations or other businesses will be dependent upon the availability of suitable acquisition candidates at acceptable costs, our ability to compete effectively for available acquisition candidates and the availability of capital to complete the acquisitions. We may not successfully identify suitable targets, or if we do, we may not be able to close the transactions, or if we close the transactions, they may not be profitable. In addition, CNH's consent is required for the acquisition of any CNH dealership, and the consent of the Wells Fargo Bank Syndicate is required for

18


Table of Contents


the acquisition of dealerships meeting certain thresholds or other criteria defined in the Senior Secured Credit Facility. CNH typically evaluates management, performance and capitalization of a prospective acquirer in determining whether to consent to the sale of a CNH dealership. There can be no assurance that CNH or the Wells Fargo Bank Syndicate will consent to any or all acquisitions of dealerships that we may propose.

Our potential inability to successfully integrate newly-acquired dealerships may adversely affect our financial results.

        Once an acquisition is completed, we face many other risks commonly encountered with growth through acquisitions. These risks include incurring significantly higher than anticipated capital expenditures and operating expenses; failing to assimilate the operations and personnel of the acquired dealerships; disrupting our ongoing business; dissipating our management resources; failing to maintain uniform standards, controls and policies; and impairing relationships with employees and customers as a result of changes in management. Fully integrating an acquired dealership into our operations and realization of the full benefit of our strategies, operating model and systems may take several years. We may not be successful in overcoming these risks or any other problems encountered with such acquisitions. To the extent we do not successfully avoid or overcome the risks or problems related to acquisitions, our results of operations and financial condition could be adversely affected. Future acquisitions also will have a significant impact on our financial position and capital needs, and could cause substantial fluctuations in our quarterly and yearly results of operations. Acquisitions could include significant goodwill and intangible assets, which may result in future impairment charges that would reduce our stated earnings.

        We have grown significantly through acquisitions in recent years and expect to continue to grow through acquisitions. Management has expended, and expects to continue to expend, significant time and effort in evaluating, completing and integrating acquisitions and opening new stores. Our systems, procedures and controls may not be adequate to support our expanding operations. Any future growth will also impose significant added responsibilities on our executives, including the need to identify, recruit and integrate new senior level managers and executives. We may not be able to identify and retain such additional management. If we are unable to manage growth efficiently and effectively, or are unable to attract and retain additional qualified management, there could be a material adverse effect on our financial condition and results of operations.

We lease many of our dealership sites from related parties, and if we are unable to obtain commercially reasonable terms and conditions from these related parties or unrelated third parties in the future, our growth and financial condition may be adversely affected.

        We lease 43 of our 81 dealership sites from entities affiliated with David Meyer, our Chairman and Chief Executive Officer, Tony Christianson, one of our directors, Peter Christianson, our President and Chief Operating Officer, or James L. Williams, one of our directors. We expect that we may lease future dealership sites we acquire from parties related to our affiliates. There is no guarantee that related parties will offer us commercially reasonable terms and conditions or that unrelated third parties will provide alternate dealership sites on commercially reasonable terms and conditions. If we cannot obtain commercially reasonable terms and conditions on leases for our current or future dealership sites from entities related to Messrs. Meyer, Tony Christianson, Peter Christianson or Williams, or from unrelated third parties, our growth and financial condition may be adversely affected.

Substantial inventory financing is required for the equipment we sell but may not be available, which could adversely affect our growth and results of operations.

        The sale of agricultural and construction equipment requires substantial inventories of equipment and parts to be maintained at each store to facilitate sales to customers on a timely basis. We generally

19


Table of Contents


purchase our inventories of equipment with the assistance of floorplan financing programs through CNH Capital and other lenders. As we grow, whether internally or through acquisitions, our inventory requirements will increase and, as a result, our financing requirements also will increase. In the event that our available financing sources are not maintained or are insufficient to satisfy our future requirements, we would be required to obtain financing from other sources. There can be no assurance that additional or alternative financing could be obtained on commercially reasonable terms. To the extent additional financing cannot be obtained on commercially reasonable terms, our growth and results of operations could be adversely affected.

Failure to properly manage our equipment inventory, our largest asset, would have a significant adverse effect on our operations.

        Our equipment inventory has generally represented 50% or more of our total assets. Thus, our success is significantly dependent upon our ability to manage the supply and cost of new and used equipment. The pricing of equipment can be highly volatile and subject to negotiation, particularly in the used equipment market. Pricing for and sales of used equipment can be significantly affected by the limited market for such equipment. Further, liquidation prices of used agricultural and construction equipment can have significant fluctuations due to economic cycles, utilization trends and degree of specialization. We are dependent upon the ability of our management and buyers to negotiate acceptable purchase prices, to affect a proper balance of new and used equipment and to manage the amount of equipment in inventory to assure quick turnover. Our failure to manage our inventory and equipment costs could materially adversely affect our results of operations and financial condition.

Adverse changes in governmental agricultural policies, including decreases in farm subsidies, may reduce demand for agricultural equipment and cause our revenue to decline.

        Changes in governmental agricultural policy could adversely affect sales of agricultural equipment. Government subsidies influence demand for agricultural equipment. Future farm bills and USDA budgets may reduce the amount of payments to individual farmers. We cannot predict the outcome of such governmental funding, and to the extent that future funding to individual farmers is reduced, these reductions in funding could reduce demand for agricultural equipment and we could experience a decline in revenue.

Economic events, particularly in the credit markets, may adversely affect our business and results of operations.

        The agricultural and construction equipment industries are affected by macroeconomic factors, including changes in international, national, regional, and local economic conditions. Current global economic conditions pose a risk to our business as customers may postpone spending in response to tighter credit, negative financial news, downturns in agricultural commodity prices and the housing market and/or declines in income or asset values, which could have a material negative effect on the demand for our products and services. Our business is also particularly dependent on our access to the capital and credit markets to finance acquisitions and manage inventory. Tight credit markets, a low level of liquidity in many financial markets, and extreme volatility in fixed income, credit, currency and equity markets have the potential to adversely affect our business. Such disruptions in the overall economy and financial markets and the related reduction in consumer confidence in the economy, slow activity in the capital markets, negatively affect access to credit on commercially acceptable terms, and may adversely impact the access of us or our customers to credit and the terms of any such credit. Further, any decreased collectability of accounts receivable or increase in customer insolvencies could negatively impact our results of operations. The nature of the agricultural and construction equipment industries is such that a downturn in demand can occur suddenly, due to tightening credit markets, decreasing commodity prices or demand, decreasing infrastructure and housing development, adverse

20


Table of Contents


weather conditions or other circumstances, resulting in excess inventory, un-utilized production capacity and reduced prices for equipment, which would harm our revenue and profitability. Uncertainty about current global economic conditions, agricultural commodity prices and demand and the housing market could also continue to increase the volatility of our stock price.

Adverse changes in the agricultural industries could result in decreases in purchases of agricultural equipment and harm our revenue and profitability.

        Our business depends to a great extent upon general activity levels in the agricultural industries. Changes in farm income and farmland value, the level of worldwide farm output and demand for farm products, commodity prices, animal diseases and crop pests, and limits on agricultural imports are all material factors that could adversely affect the agricultural industries and result in a decrease in the amount of agricultural equipment that our customers purchase. The nature of the agricultural equipment industries is such that a downturn in demand can occur suddenly, resulting in excess inventories, un-utilized production capacity and reduced prices for new and used equipment. These downturns may be prolonged and our revenue and profitability would be harmed.

Adverse changes in the construction industry could result in decreased demand for construction equipment and harm our revenue.

        General economic conditions in markets in which we do business can impact the demand for our construction equipment. The construction industry in our geographical areas has experienced a prolonged economic down cycle as a result of the macroeconomic environment, which negatively impacts sales of light construction equipment. Decreased demand for our products can have a negative impact on our financial performance and cash flow. Our business and earnings are impacted by the changes in the construction industry. The ability of consumers to obtain mortgages for the purchase of newly constructed homes or commercial properties impacts the overall demand for new home construction. The uncertainties created by recent events in the sub-prime mortgage market and their impact on the overall mortgage market, including the tightening of credit standards, could adversely affect the ability of consumers to obtain financing, thus reducing demand for new construction and in turn reducing our customers' demand for our construction equipment. Reduced demand for our construction equipment could negatively affect our financial performance and cash flow.

Climate fluctuations may negatively impact the agricultural and construction equipment markets and harm our sales.

        Weather conditions, particularly severe floods and droughts, can have a significant impact on the success of regional agricultural and construction markets and, therefore, the economic conditions of the regions in which we operate stores. Accordingly, our financial condition and results of operations may be materially and adversely affected by any adverse cyclical trends or weather conditions. Our quarterly operating results are subject to fluctuation due to varying weather patterns, which may impact the timing and amount of equipment, parts and service purchases by our customers. A significant increase in the severity of weather cycles could increase the volatility of our results of operations and impact our financial condition. If we acquire businesses in geographic areas other than where we currently have operations, we may be affected more by the above-mentioned or other seasonal and equipment buying trends.

Our results of operations may fluctuate from period to period due to interest rate adjustments.

        The ability to finance affordable purchases, of which the interest rate charged is a significant component, is an important part of a customer's decision to purchase agricultural or construction equipment. Volatility in the credit markets may have a negative impact on our business by making it more difficult for certain of our customers to obtain financing to purchase agricultural or construction

21


Table of Contents


equipment. Interest rate increases may make equipment purchases less affordable for customers and, as a result, our revenue and profitability may decrease as we manage excess inventory and reduce prices for equipment. To the extent we cannot pass on our increased costs of inventory to our customers, our net income may decrease. Conversely, any decrease in interest rates may positively affect a customer's decision to purchase agricultural or construction equipment. Partially as a result of the foregoing, our results of operations have in the past and in the future are expected to continue to fluctuate from quarter to quarter and year to year. We are unable to anticipate the timing and impact of interest rate adjustments.

Aggressive pricing competition could adversely affect our results of operation and growth.

        The agricultural and construction equipment sales and distribution industries are highly competitive and fragmented, with large numbers of companies operating on a regional or local scale. Historically, our competitors have competed aggressively on the basis of pricing or inventory availability, resulting in decreased margins on our sales to the extent we choose to match our competitors' downward pricing. To the extent we choose not to match or remain within a reasonable competitive distance from our competitors' pricing, it could also have an adverse impact on our results of operations, as we may lose sales volume. In addition, to the extent CNH's competitors provide their dealers with more innovative or higher quality products, better customer financing, or have more effective marketing efforts, our ability to compete and financial condition and results of operations could be adversely affected.

We are substantially dependent on our Chief Executive Officer and President/Chief Operating Officer, the loss of either of whom could have a material adverse effect on our business.

        We believe our success will depend to a significant extent upon the efforts and abilities of David Meyer, our Chairman and Chief Executive Officer, and Peter Christianson, our President and Chief Operating Officer. The employment relationships with both Mr. Meyer and Mr. Christianson are terminable by us or each of them at any time for any reason. The loss of the services of one or both of these persons and other key employees could have a material adverse effect on our operating results.

Selling agricultural and construction equipment and parts subjects us to product liability risks that could adversely affect our financial condition and reputation.

        Products sold or serviced by us may expose us to potential liabilities for personal injury or property damage claims relating to the use of such products. Our product liability insurance may not be adequate to cover product liability claims. Such insurance may not continue to be available on economically reasonable terms. An uninsured or partially insured claim for which indemnification is not provided could have a material adverse effect on our financial condition. Furthermore, if any significant claims are made against us or against CNH or any of our other suppliers, our business may be adversely affected by any resulting negative publicity.

Being a public company has substantially increased our legal and financial compliance costs, which could harm our business, financial condition and results of operations.

        Compliance with publicly-traded company regulations adversely impacts our resources. As a publicly-traded company, we are subject to rules and regulations that increase our legal and financial compliance costs, make some activities more time-consuming and costly, and divert our management's attention away from the operation of our business. These rules and regulations may make it more difficult and more expensive for us to maintain director and officer liability insurance and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, we may experience more difficulty attracting and retaining qualified individuals to serve on our board of directors or as executive officers. We cannot predict or

22


Table of Contents


estimate the amount of additional costs we may incur as a result of these requirements or the timing of these costs. The costs of being a publicly-traded company and the attendant diversion of management's time and attention may have a material adverse effect on our business, financial condition and results of operations.

Our internal control over financial reporting may not be effective and our independent registered public accounting firm may not be able to certify as to its effectiveness, which could have a significant and adverse effect on our business and reputation.

        We are required to comply with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002 and rules and regulations of the SEC thereunder. If we fail to maintain the adequacy of our internal control over financial reporting, as such standards are modified, supplemented or amended from time to time, we may not be able to ensure that we can conclude on an ongoing basis that we have effective internal control over financial reporting in accordance with Section 404. We cannot be certain as to the timing of completion of our evaluation, testing and any remedial actions or their impact on our operations. If we are not able to comply with the requirements of Section 404, our independent registered public accounting firm may not be able to certify as to the effectiveness of our internal control over financial reporting, we may be unable to report our financial results accurately or in a timely manner and we may be subject to sanctions or investigation by regulatory authorities, such as the SEC. As a result, there could be a negative reaction in the financial markets due to a loss of confidence in the reliability of our financial statements. In fiscal 2010, we began implementing a new ERP system. Unforeseen problems with or any difficulties encountered integrating the new ERP system could result in internal control deficiencies.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

        None.

ITEM 2.    PROPERTIES

Equipment Stores

        We currently operate 81 agricultural and construction equipment stores, including two outlet stores in the following locations. Certain stores (those designated with an *) are included in the Agriculture segment but also sell some construction equipment.

Agriculture Segment

North Dakota (14 stores)   Iowa (14 stores, including 1 outlet)

Arthur

 

Lidgerwood

 

Anthon

 

Grundy Center

Casselton

 

Lisbon

 

Avoca

 

Iowa Falls

Grand Forks*

 

Mandan*

 

Blairstown

 

Kingsley

Jamestown

 

Mayville

 

Center Point*

 

Le Mars

Kintyre

 

Wahpeton (2 stores)

 

Cherokee

 

Oskaloosa

Kulm

 

Wishek

 

Cherokee (outlet)

 

Pella

Lamoure

     

Greenfield

 

Waverly

23


Table of Contents

 

Minnesota (14 stores, including 1 outlet)   South Dakota (11 stores)

Ada

 

Moorhead

 

Aberdeen (2 stores)*

 

Miller

Albert Lea

 

Moorhead (outlet)

 

Britton

 

Pierre

Crookston*

 

Pipestone

 

Highmore

 

Sioux Falls

Elbow Lake

 

Redwood Falls

 

Huron

 

Redfield

Fergus Falls

 

Roseau

 

Milbank

 

Watertown

Graceville

 

Thief River Falls

       

Marshall*

 

Winger

       

 

Nebraska (6 stores)    
   

Grand Island

 

Kearney

       

Hastings

 

Lexington

       

Holdrege

 

North Platte

       

Construction Segment

North Dakota (5 stores)   Iowa (4 stores)

Bismarck

 

Minot

 

Clear Lake

 

Des Moines

Fargo (2 stores)

 

Williston

 

Davenport

 

Sioux City

 

Nebraska (2 stores)   South Dakota (2 stores)

Lincoln

 

Omaha

 

Rapid City

 

Sioux Falls

 

Montana (6 stores)   Wyoming (3 stores)

Big Sky

 

Great Falls

 

Casper

 

Gillette

Billings (2 stores)

 

Missoula

 

Cheyenne

   

Bozeman

           

        Our stores are generally located in rural areas on property zoned for commercial use. The stores typically range from 5,000 square feet with three acres of land to 40,000 square feet with 14 acres of land. We fully utilize the leased space for each of our stores and believe the respective square footage and related acreage is adequate to meet our current and anticipated needs.

Store Lease Arrangements

        As of January 31, 2011, we leased real estate for 43 of our stores from entities affiliated with David Meyer, our Chairman and Chief Executive Officer, Tony Christianson, one of our directors, Peter Christianson, our President and Chief Operating Officer or James L. Williams, one of our directors. Of these 43 stores, we leased 41 dealership sites from Dealer Sites, LLC, an entity owned in part by Messrs. Meyer, Tony Christianson and Peter Christianson or their affiliates; one dealership site from C.I. Farm Power, Inc., an entity owned by Mr. Peter Christianson; and one dealership site from Arthur Mercantile Company, an entity owned in part by James L. Williams. We leased 47 additional properties for stores and storage facilities under operating lease agreements with unrelated parties as of January 31, 2011. The leases for our dealership sites generally expire between 2011 and 2022, other than those leases which are currently automatically renewed on a year-to-year-basis until either we or the lessor terminate them. We do not intend to own significant amounts of real estate. Therefore, we anticipate that when we need real estate, including as part of acquiring dealerships, we will lease such real estate from third parties, which may include affiliates of our investors, directors or management. We intend for the terms of all of our leases to be commercially reasonable. We do not believe the terms of our leases with entities affiliated with Messrs. Meyer, Tony Christianson, Peter Christianson

24


Table of Contents


and Williams are any less favorable to us than could be obtained in an arm's length transaction with an unrelated party.

        Our store lease agreements with entities affiliated with David Meyer, Peter Christianson, Tony Christianson and James L. Williams all contain substantially similar terms. The leases with Dealer Sites, LLC, C.I. Farm Power, Inc. and Arthur Mercantile Company provide for fixed lease periods ranging from three to ten years. All of the leases provide for fixed monthly rental payments and require us to pay the real estate taxes on the properties for the lease periods. The leases require that we maintain public liability and personal property insurance on each of the leased premises, and require us to indemnify the lessor in connection with any claims arising from the leased premises during our occupation of the property. The leases generally prohibit us from assigning the lease agreements or subletting the leased premises without the prior written consent of the lessor. The lease agreements with Dealer Sites, LLC provide that in the event Dealer Sites, LLC and Titan Machinery Inc. agree to sell the leased premises to a party other than us or our affiliates during the term of the lease, then we shall share in half of any surplus or deficit resulting to Dealer Sites, LLC from that sale.

        Our store lease agreements with unrelated parties contain terms comparable to the agreements with entities affiliated with our directors and officers described above. The lease periods range from automatically renewable month-to-month terms to 20 years in length. Many of the lease agreements either give us the option to renew or extend the lease for an additional period at the conclusion of the original lease term or automatically renew the lease term at the conclusion of the original lease period on a month-to-month or year-to-year basis. A majority of the leases provide for fixed monthly rental payments and require us to pay the real estate taxes on the properties for the lease periods. All of the leases require that we maintain public liability and personal property insurance on each of the leased premises, and a majority of the leases require us to indemnify the lessor in connection with any claims arising from the leased premises during our occupation of the property. Most of the leases prohibit us from assigning the lease agreements or subletting the leased premises without the prior written consent of the lessor. We have been granted a right of first refusal to purchase the Watertown and one of the Aberdeen properties during the applicable lease terms. The lease agreements for the West Fargo, Kingsley, Le Mars, Watertown, Mayville and Redfield properties grant us the option to purchase the leased premises during or at the conclusion of the lease term. The lease agreements for the Milbank and Albert Lea properties grant Dealer Sites, LLC the option to purchase the leased premises during or at the conclusion of the lease term. The Kingsley, Le Mars and Redfield lease agreements grant the lessor the right to require Dealer Sites, LLC to purchase the leased premises during or at the conclusion of the lease term.

        As part of our due diligence review prior to a dealership acquisition, we evaluate the adequacy, suitability and condition of the related real estate. Our evaluation typically includes a Phase I environmental study, and if deemed necessary, a Phase II environmental study, of the real property to determine whether there are any environmental concerns. If any environmental concerns exist, we generally require that such concerns be addressed prior to acquisition of the dealership.

Headquarters

        We currently lease and occupy approximately 48,000 square feet in West Fargo, North Dakota for our headquarters, which lease expires on May 31, 2020. We continually review our location needs, including the adequacy of our headquarters space, to ensure our space is sufficient to support our operations. We believe there is ample opportunity for expansion in the West Fargo area if necessary.

25


Table of Contents

ITEM 3.    LEGAL PROCEEDINGS

        We are, from time to time, subject to claims and suits arising in the ordinary course of business. Such claims have, in the past, generally been covered by insurance. Management believes the resolution of other legal matters will not have a material effect on our financial condition or results of operation, although no assurance can be given with respect to the ultimate outcome of any such actions. Furthermore, there can be no assurance that our insurance will be adequate to cover all liabilities that may arise out of claims brought against us. We are not currently a party to any material litigation.

ITEM 4.    (REMOVED AND RESERVED)

EXECUTIVE OFFICERS OF THE REGISTRANT

        The names, ages and positions of our executive officers are as follows:

Name
  Age   Position

David Meyer

    57   Chairman and Chief Executive Officer

Peter Christianson

    54   President, Chief Operating Officer and Director

Mark Kalvoda

    39   Chief Financial Officer

        David Meyer is our Chairman and Chief Executive Officer. Mr. Meyer was a founder of our company in 1980 and has been a director of our company since its creation. From 1976 to 1980, Mr. Meyer was a partner in a Case and New Holland dealership with locations in Lisbon and Wahpeton, North Dakota.

        Peter Christianson has been our President and a director since January 2003, became our Chief Operating Officer in April 2011, and was our Chief Financial Officer from August 2007 to April 2011. Prior to joining us and since 1988, he was a partner and owner of C.I. Farm Power, Inc., the operator of two of the dealership locations acquired by Titan Machinery LLC in 2002. Peter Christianson and Tony Christianson, one of our directors, are brothers.

        Mark Kalvoda became our Chief Financial Officer in April 2011 and previously served as our Chief Accounting Officer since September 2007. Prior to joining us, he held various positions between 2004 and 2007 at American Crystal Sugar Co., including Corporate Controller, Assistant Secretary and Assistant Treasurer. Prior to working for American Crystal Sugar Co., he served in various financial positions within Hormel Foods Corporation.

26


Table of Contents


PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

        Our common stock began trading on December 6, 2007 on the Nasdaq Global Market under the symbol "TITN" in connection with our initial public offering and began trading on the Nasdaq Global Select Market in January 2009. The following table sets forth, for the periods indicated, the high and low sale prices of our common stock as reported by the Nasdaq Global Select Market.

 
  High   Low  

Fiscal 2011

             

First Quarter

  $ 15.44   $ 10.70  

Second Quarter

  $ 15.19   $ 11.93  

Third Quarter

  $ 20.77   $ 14.00  

Fourth Quarter

  $ 24.74   $ 18.67  

Fiscal 2010

             

First Quarter

  $ 12.96   $ 7.50  

Second Quarter

  $ 17.00   $ 9.96  

Third Quarter

  $ 14.49   $ 10.38  

Fourth Quarter

  $ 13.19   $ 9.81  

        As of April 1, 2011, there were approximately 500 record holders of our common stock, excluding holders whose stock is held either in nominee name and/or street name brokerage accounts.

DIVIDENDS

        We have not historically paid any dividends on our common stock and do not expect to pay cash dividends on our common stock in the foreseeable future. Payment of future cash dividends, if any, will be at the discretion of our board of directors after taking into account various factors, including our financial condition, operating results, current and anticipated cash needs, outstanding indebtedness and plans for expansion and restrictions imposed by lenders, if any. Currently, our credit facility with the Wells Fargo Bank Syndicate restricts our ability to pay cash dividends to an amount not to exceed 50% of consolidated net income for the then trailing four quarters, so long as no default of event of default exists prior to or immediately following such action or otherwise results from such action.

UNREGISTERED SALES OF EQUITY SECURITIES

        We did not have any unregistered sales of equity securities during the fourth quarter of fiscal 2011.

SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

        For information on our equity compensation plans, refer to Item 12, "Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters."

REPURCHASES

        We did not engage in any repurchases of our Common Stock during the fiscal quarter ended January 31, 2011.

27


Table of Contents

STOCK PERFORMANCE GRAPH

        The following graph compares the cumulative total return for the last trading day of the Company's last four fiscal years following commencement of trading on December 6, 2007 in conjunction with the Company's initial public offering on a $100 investment (assuming dividend reinvestment) in each of the Common Stock of the Company, the Russell 2000 Stock Index and the S&P 500 Retail Index.

GRAPHIC

 
   
  Fiscal Year Ended January 31,  
 
  December 6,
2007
 
 
  2008   2009   2010   2011  

Titan Machinery Inc. 

  $ 100.00   $ 173.84   $ 107.07   $ 116.24   $ 255.59  

Russell 2000 Index

    100.00     90.64     56.36     76.50     99.28  

S&P 500 Retail Index

    100.00     96.10     58.98     90.20     113.02  

28


Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA

        The data given below as of and for each of the five years in the period ended January 31, 2011, has been derived from the Company's Audited Consolidated Financial Statements. In order to understand the effect of accounting policies and material uncertainties that could affect our presentation of financial information, such data should be read in conjunction with the Company's Consolidated Financial Statements and Notes thereto included under Item 8 to this Form 10-K and in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operation included under Item 7 to this Form 10-K.

 
  Year Ended January 31,  
 
  2011   2010   2009   2008   2007  
 
  (in thousands, except per share data)
 

Statement of Operations Data:

                               

Revenue

                               
 

Equipment

  $ 855,443   $ 643,186   $ 540,307   $ 338,382   $ 220,958  
 

Parts

    140,982     119,509     94,984     58,743     42,619  
 

Service

    74,506     58,983     44,224     27,344     21,965  
 

Other

    23,558     17,103     10,922     8,502     7,056  
                       

    1,094,489     838,781     690,437     432,971     292,598  
                       

Cost of revenue

                               
 

Equipment

    773,060     578,411     478,324     302,320     200,558  
 

Parts

    100,281     83,219     67,270     42,568     29,909  
 

Service

    27,767     21,615     16,729     10,118     8,183  
 

Other

    18,813     14,441     8,245     5,913     5,337  
                       

    919,921     697,686     570,568     360,919     243,987  
                       

Gross Profit

    174,568     141,095     119,869     72,052     48,611  

Operating expenses

    130,541     108,998     86,940     53,190     37,399  
                       

Income from operations

    44,027     32,097     32,929     18,862     11,212  

Other income (expense)

                               
 

Interest and other income

    1,794     1,843     1,545     577     349  
 

Interest expense

    (8,584 )   (6,948 )   (3,969 )   (6,292 )   (5,473 )
 

Debt retirement costs

                (3,824 )    
                       

Income before income taxes

    37,237     26,992     30,505     9,323     6,088  

Provision for income taxes

    (14,895 )   (11,255 )   (12,430 )   (4,110 )   (2,450 )
                       

Income from continuing operations

    22,342     15,737     18,075     5,213     3,638  

Discontinued operations

                     
                       

Net income

  $ 22,342   $ 15,737   $ 18,075   $ 5,213   $ 3,638  

Adjustment to income:

                               
 

Amortization of syndication fees—preferred stock

                (51 )   (21 )
 

Unpaid accumulated preferred dividends

                (88 )   (102 )
                       

Income available to common stockholders

  $ 22,342   $ 15,737   $ 18,075   $ 5,074   $ 3,515  
                       

Earnings per share

                               
 

Basic

  $ 1.27   $ 0.89   $ 1.11   $ 0.90   $ 0.81  
 

Diluted

  $ 1.23   $ 0.88   $ 1.08   $ 0.67   $ 0.57  

Weighted average shares outstanding

                               
 

Basic

    17,658     17,593     16,291     5,607     4,345  
 

Diluted

    18,146     17,968     16,779     8,246     6,907  

29


Table of Contents

 
  January 31,  
 
  2011   2010   2009   2008   2007  
 
  (in thousands)
 

Balance Sheet Data:

                               

Cash

  $ 76,112   $ 76,185   $ 41,047   $ 42,802   $ 7,572  

U.S. treasury bills

            44,994          

Receivables

    44,945     22,254     19,626     22,061     10,921  

Inventories

    429,844     347,580     241,094     145,767     106,254  

Prepaid expense

    1,003     1,009     533     215     186  

Income tax receivable

        1,595     1,433     1,074      

Deferred income taxes

    3,247     2,266     1,426     1,027     462  

Goodwill and intangibles, net

    23,125     15,057     12,830     8,608     3,905  

Property and equipment

    65,372     46,604     45,269     16,023     8,175  

Other assets

    5,198     2,262     1,996     1,792     1,397  
                       

Total Assets

  $ 648,846   $ 514,812   $ 410,248   $ 239,369   $ 138,872  
                       

Accounts payable

  $ 15,957   $ 12,352   $ 18,652   $ 9,244   $ 4,228  

Floorplan notes payable(1)

    320,801     249,872     166,481     105,848     84,699  

Current maturities of long-term debt

    4,207     7,218     7,623     5,654     2,824  

Customer deposits

    28,180     12,974     15,158     19,310     4,608  

Accrued expenses

    16,816     9,870     8,308     6,137     2,287  

Income taxes payable

    2,093                 378  
                       

Total current liabilities

    388,054     292,286     216,222     146,193     99,024  

Long-term liabilities

    46,235     32,002     20,259     15,759     8,043  

Subordinated debentures

                1,300     16,747  

Redeemable securities

                    1,680  

Total stockholders' equity

    214,557     190,524     173,767     76,117     13,378  
                       

  $ 648,846   $ 514,812   $ 410,248   $ 239,369   $ 138,872  
                       

(1)
Approximately 52% of floorplan notes payable were interest bearing at January 31, 2011.

30


Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

        You should read the following discussion and analysis of our financial condition and results of operations together with our financial statements and the related notes appearing under Item 8. Some of the information contained in this discussion and analysis or set forth elsewhere in this annual report, including information with respect to our plans and strategy for our business and expected financial results, includes forward-looking statements that involve risks and uncertainties. You should review the "Risk Factors" under Item 1A for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.

BUSINESS DESCRIPTION

        We own and operate a network of full service agricultural and construction equipment stores in the United States. Based upon information provided to us by CNH Global N.V. or its U.S. subsidiary CNH America LLC, collectively referred to in this annual report as CNH, we are the world's largest retail dealer of Case IH Agriculture equipment and a major retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the U.S. We operate our business through two reportable segments, Agriculture and Construction. Within each segment, we have four principal sources of revenue, new and used equipment sales, parts sales, service, and other business activities including equipment rental.

        The agricultural equipment we sell and service includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment we sell and service includes heavy construction and light industrial machinery for commercial and residential construction, road and highway construction and mining applications. We offer our customers a one-stop solution for their equipment needs through:

        The new equipment and parts we sell are supplied primarily by CNH. According to public reports filed by CNH, CNH is a leading manufacturer and supplier of agricultural and construction equipment based on the number of units sold, primarily through the Case IH Agriculture, New Holland Agriculture, Case Construction and New Holland Construction brands. Sales of new CNH products accounted for approximately 81.4% of our new equipment revenue in fiscal 2011, with no other supplier accounting for more than 3.1%. We acquire used equipment for resale through trade-ins from our customers and selective purchases. We sell parts and provide in-store and on-site repair and maintenance services. We rent equipment and provide other ancillary services such as equipment transportation, GPS signal subscriptions and finance and insurance products.

        Throughout our 31-year operating history we have built an extensive, geographically contiguous network of 81 stores, including two outlet stores, located in North Dakota, South Dakota, Minnesota, Iowa, Nebraska, Montana and Wyoming. We have a history of growth through acquisitions, including 34 acquisitions consisting of 75 stores operating in seven states since January 1, 2003. We expect that acquisitions will continue to be an important component of our growth.

31


Table of Contents

Certain External Factors Affecting our Business

        We are subject to a number of factors that affect our business as discussed in the sections entitled "Risk Factors" and "Information Regarding Forward-Looking Statements." Certain of the external factors include, but are not limited to, the following:

Industry Factors

        Our business is primarily driven by the demand for agricultural equipment for use in the production of food, fiber, feed grain and renewable energy; home and garden applications; and the maintenance of commercial, residential and government properties. Based on USDA data, we believe farmers have recently experienced historically strong economic fundamentals, driven by growing global demand for agricultural commodities in part due to growth in renewable energy and the economies of developing countries. This strong farm economy contributed significantly to our results of operations in fiscal 2011, 2010 and 2009. We believe our operating model, as discussed in "Business—Titan Operating Model," enables us to maximize opportunities and implement our conservative expenditure philosophy that emphasizes scalable costs. Further, our large and diverse customer base and seven-state geographic footprint limits our exposure to negative events that may occur in a particular area or crop. Additionally, we believe that acquisition opportunities will continue to be strong.

        Our business is also impacted by the demand for construction equipment for use in private and government commercial, residential and infrastructure construction; demolition; maintenance; mining; energy and forestry operations. CNH and industry reports show that demand for construction equipment in our markets is driven by several factors, one of which is public infrastructure spending, including roads and highways, sewer and water. Any growth in federal allocations to public infrastructure spending over the next few years should positively impact our future results of operations. Likewise, any decline in federal allocations to public infrastructure spending over the next few years should negatively impact our future results of operations. To address the uncertainty of the construction industry, we expect to continue our focus on the agriculture industry and acquisition opportunities to establish additional locations in the markets where we believe the local construction industry will maintain its current level or grow.

Seasonality

        Our quarterly operating results are subject to fluctuation due to varying weather patterns, which may impact the timing and amount of equipment purchases, rentals, and after-sales parts and service purchases by our Agriculture and Construction customers.

Economic Cyclicality

        Sales of agricultural equipment historically have fluctuated with general farm economic trends, primarily driven by farm cash receipts. Sales of construction equipment historically have fluctuated with general economic cycles. During economic downturns, construction equipment retailers tend to experience similar periods of decline and recession as the general economy.

Credit Market Changes

        Changes in credit markets can affect our customers' ability and willingness to make capital expenditures, including purchasing our equipment. Creditors tightened their lending standards following the collapse of the sub-prime mortgage market and these conditions may still be continuing in some areas. These tightened lending standards may have a negative impact on our business if our customers are unable to obtain financing for equipment purchases. However, if retail interest rates remain low, our business may be positively affected by customers who find financing purchases of our equipment more attractive due to lower borrowing costs. Our business is also particularly dependent on our access

32


Table of Contents


to credit markets to finance acquisitions and manage inventory. Continued tightened lending standards may make it more difficult for us to obtain financing on commercially reasonable terms. We cannot predict what future changes will occur in credit markets or how these changes will impact our business.

Inflation

        Inflation has not had a material impact upon operating results and we do not expect it to have such an impact in the future. To date, in those instances in which we have experienced cost increases, we have been able to increase selling prices to offset such increases. There can be no assurance, however, that our business will not be affected by inflation or that we can continue to increase our selling prices to offset increased costs and remain competitive.

Acquisitions

        We have a successful history of growth through acquisitions. Since January 1, 2003, we have completed 34 acquisitions consisting of 75 stores operating in seven states. These acquisitions have been the most significant factor affecting our results of operations and liquidity over the last several years, as noted in the period-to-period comparisons below. We expect that acquisitions will continue to be an important component of our growth. Acquisitions are typically financed with floorplan debt, long-term debt and cash from operations. Although we cannot quantify the impact of any such potential acquisitions, we believe the nature of their impact on our financial statements to be similar to that experienced with our prior acquisitions as noted in our discussions of period comparisons.

        The following is a summary of acquisitions completed during the identified periods.

Fiscal 2012

Fiscal 2011

Fiscal 2010

33


Table of Contents

Fiscal 2009

Critical Accounting Policies and Estimates

        During the preparation of our financial statements, we are required to make estimates, assumptions and judgments that affect reported amounts. These estimates, assumptions and judgments include those related to bad debts and credit sales, inventories, goodwill and intangibles, income taxes and legal proceedings, revenue recognition, allowance for doubtful accounts, inventory reserves, incentive plan accruals, deferred taxes, stock-based compensation, and accounting for business combinations. We update these estimates, assumptions and judgments as appropriate, which in most cases is at least quarterly. We use our technical accounting knowledge, cumulative business experience,

34


Table of Contents


judgment and other factors in the selection and application of our accounting policies. While we believe the estimates, assumptions and judgments we use in preparing our financial statements are appropriate, they are subject to factors and uncertainties regarding their outcome and therefore, actual results may materially differ from these estimates. We believe the following are our primary critical accounting policies and estimates.

Revenue Recognition

        Revenue on equipment sales is recognized upon receipt of a signed contract and delivery of product to customers. Revenue on parts sales is recognized upon delivery of product to customers. Rental and service revenue is recognized at the time the related services are provided. In addition to outright sales of new and used equipment, certain rental agreements may include rent-to-purchase options. Under these agreements, customers are given a period of time to exercise an option to purchase the related equipment, with a portion of the rental payments being applied to the purchase price. Any such equipment is included in inventory until the purchase option is exercised. Payments received during the rental period are recorded as customer deposits, with equipment sales revenue being recognized upon the exercise of the purchase option.

Inventories

        New and used equipment are stated at the lower of cost (specific identification) or market value with adjustments for decreases in market value on inventory rented but available for sale being a percentage of the rental income received on such inventory. All used equipment inventories and certain new equipment inventories, including that which has been rented, is subject to periodic lower of cost or market evaluation. Parts inventories are valued at the lower of average cost or market value. An estimate of parts inventories not expected to be sold in the next year has been reported separately, which is based on historical sales of parts on hand. Typically, there are no freight-in charges, except in cases of special orders where such freight-in charges are included in the cost of inventory. Work in process is valued at the retail rates of labor incurred and parts inventories used on service work in process at year end.

Intangible Assets and Goodwill

        Intangible assets with a finite life consist of customer relationships and covenants not to compete, and are carried at cost less accumulated amortization. We amortize the cost of identified intangible assets on a straight-line basis over the expected period of benefit, which is three years for customer relationships and the contractual term for covenants not to compete, which range from five to ten years. In accordance with the guidance for impairment of long-lived assets in ASC 360-10—Property, Plant, and Equipment—Overall, we review intangible assets that have finite useful lives when an event occurs indicating the potential for earlier impairment. We measure impairment losses related to long-lived assets based on the amount by which the carrying amounts of these assets exceed their fair values. We measure fair value under ASC 360-10, which is generally based on the sum of the undiscounted future cash flows.

        Intangible assets with an indefinite life consist of distribution rights with manufacturers. We classify distribution rights as indefinite lived intangible assets as our distribution agreements continue indefinitely by their terms, or are routinely awarded or renewed without substantial cost to us or material modifications to the underlying agreements. As such, we believe that its distribution agreements will contribute to cash flows for an indefinite period, therefore the carrying amount of distribution rights is not amortized. We test distribution rights for impairment annually, or more frequently upon the occurrence of an event or when circumstances indicate that its carrying amount is greater than its fair value. The impairment test is performed by comparing the carrying value to its fair value. Fair value is calculated by discounting the estimated future cash flows of the respective store or

35


Table of Contents


group of stores associated with the business combination in which we obtained the distribution rights. As of January 31, 2011, the carrying value of our distribution rights was not considered impaired.

        Goodwill represents the excess of costs over the fair value of the assets of businesses acquired not allocable to separately identifiable intangible assets. Goodwill acquired in business combinations is assigned to its related reporting unit, which consist of our operating segments. Goodwill is not amortized, but is tested for impairment at the end of our fiscal year, or more frequently upon the occurrence of an event or when circumstances indicate that a reporting unit's carrying amount of goodwill is greater than its fair value. The goodwill impairment test is performed by comparing the carrying value of the reporting unit to its fair value. Fair value is calculated by discounting the estimated future cash flows of our reporting units. As of January 31, 2011, the carrying value of our goodwill was not considered impaired.

Income Taxes

        Income taxes are provided for the tax effects of transactions reported in the financial statements and consist of taxes currently due plus deferred taxes related primarily to differences between the basis of receivables, inventory, property and equipment, intangible assets, stock-based compensation, and accrued expenses for financial and income tax reporting. The deferred tax assets and liabilities represent the future tax return consequences of those differences, which will either be taxable or deductible when the assets and liabilities are recovered or settled. Our policy is to recognize interest expense and penalties related to income tax matters within our provision for income taxes. We perform a comprehensive review of our portfolio of uncertain tax positions in accordance with the requirements and recognition standards established by Financial Accounting Standards Board ("FASB") Accounting Standards Codification ("ASC") 740, Income Taxes. Pursuant to this guidance, an uncertain tax position represents our expected treatment of a tax position taken, or expected to be taken, in a tax return, that has not been reflected in measuring income tax expense for financial reporting purposes.

Stock-Based Compensation

        We account for stock-based compensation in accordance with the provisions of the ASC 718, Compensation—Stock Compensation. This guidance requires that stock-based compensation, which includes stock options and restricted stock, be accounted for at the fair value of the applicable equity instrument.

Business Combinations

        We account for business combinations in accordance with the provisions of ASC 805, Business Combinations. This guidance allows the acquirer to finalize the acquisition accounting during the measurement period, which may not exceed one year from the date of acquisition. During the measurement period the Company's accounting for the business combination transaction may be based on estimates due to various unknown factors present at the date of acquisition.

Key Financial Metrics

        In addition to tracking our sales and expenses to evaluate our operational performance, we also monitor certain key financial metrics, including absorption and same-store sales.

Absorption

        Absorption is an industry term that refers to the percentage of an equipment dealer's fixed operating expense covered by the gross margin of its combined parts and service businesses. Absorption in a given period is calculated by dividing our gross profit from parts and service sales in the period by the difference between (i) our operating expenses (including interest on floorplan notes) and (ii) our

36


Table of Contents


variable expense of sales commissions on equipment sales and incentive compensation in the same period. We believe that absorption is an important management metric because during economic down cycles our customers tend to postpone new and used equipment purchases while continuing to run, maintain and repair their existing equipment. Thus, operating at a high absorption rate enables us to operate profitably throughout economic down cycles. We measure and track absorption on a company-wide basis as well as on a per store basis. Our company-wide absorption rate was 75.0%, 75.4% and 75.7% for fiscal years 2011, 2010 and 2009, respectively.

Same-Store Sales

        Same-store sales for any period represent sales by stores that were part of our company for the entire comparable period in the preceding fiscal year. We do not distinguish relocated or newly-expanded stores in this same-store analysis. Closed stores are excluded from the same-store analysis. We believe that tracking this metric is important to evaluating the success of the Titan Operating Model on a comparable basis.

Key Financial Statement Components

Revenue

        Equipment.    We derive equipment revenue from the sale of new and used agricultural and construction equipment.

        Parts.    We derive parts revenue from the sale of parts for equipment that we sell, as well as for other equipment makes. Our parts sales provide us with a relatively stable revenue stream that is less sensitive to the economic cycles that affect our equipment sales.

        Services.    We derive services revenue from maintenance and repair services to our customers' equipment. Our repair and maintenance services provide a high-margin, relatively stable source of revenue through changing economic cycles.

        Other.    We derive other revenue from equipment rentals and ancillary equipment support activities such as equipment transportation, GPS signal subscriptions and reselling finance and insurance products.

Cost of Revenue

        Equipment.    Cost of equipment revenue is the lower of the acquired cost or the market value of the specific piece of equipment sold.

        Parts.    Cost of parts revenue is the lower of the acquired cost or the market value of the parts sold, based on average costing.

        Service.    Cost of service revenue represents costs attributable to services provided for the maintenance and repair of customer-owned equipment and equipment then on-rent by customers.

        Other.    Costs of other revenue represent costs associated with equipment rental, providing transportation, hauling, parts freight, GPS subscriptions and damage waivers, including, among other items, drivers' wages, fuel costs, shipping costs and our costs related to damage waiver policies.

Operating Expenses

        Our operating expenses include sales and marketing expenses, sales commissions (which generally are based upon equipment gross profit margins), payroll and related benefit costs, insurance expenses,

37


Table of Contents


professional fees, property rental and related costs, property and other taxes, administrative overhead, and depreciation associated with property and equipment (other than rental equipment).

Floorplan Interest

        The cost of financing inventory is an important factor affecting our results of operations. Floorplan financing from CNH Capital and our Credit Agreement represent the primary sources of financing for equipment inventories. CNH regularly offers interest-free periods as well as additional incentives and special offers. As of January 31, 2011, approximately 48% of our floorplan notes payable was non-interest bearing.

Other Interest Expense

        Interest expense represents the interest on our outstanding debt instruments, other than floorplan financing facilities.

Results of Operations

        Comparative financial data for each of our four sources of revenue for fiscal 2011, 2010, and 2009 are expressed below. The results of these periods include the operating results of the acquisitions made during these periods. The period-to-period comparisons included below are not necessarily indicative of future results. Information regarding segment revenue and income (loss) before income taxes is presented for each period following our discussion of the consolidated results of operations. Additional information regarding our segments is included in Note 16 of our audited financial statements.

 
  Year Ended January 31,  
 
  2011   2010   2009  
 
  (dollars in thousands)
 

Equipment

                   
 

Revenue

  $ 855,443   $ 643,186   $ 540,307  
 

Cost of revenue

    773,060     578,411     478,324  
               
 

Gross profit

  $ 82,383   $ 64,775   $ 61,983  
 

Gross profit margin

    9.6 %   10.1 %   11.5 %

Parts

                   
 

Revenue

  $ 140,982   $ 119,509   $ 94,984  
 

Cost of revenue

    100,281     83,219     67,270  
               
 

Gross profit

  $ 40,701   $ 36,290   $ 27,714  
 

Gross profit margin

    28.9 %   30.4 %   29.2 %

Service

                   
 

Revenue

  $ 74,506   $ 58,983   $ 44,224  
 

Cost of revenue

    27,767     21,615     16,729  
               
 

Gross profit

  $ 46,739   $ 37,368   $ 27,495  
 

Gross profit margin

    62.7 %   63.4 %   62.2 %

Other, including trucking and rental

                   
 

Revenue

  $ 23,558   $ 17,103   $ 10,922  
 

Cost of revenue

    18,813     14,441     8,245  
               
 

Gross profit

  $ 4,745   $ 2,662   $ 2,677  
 

Gross profit margin

    20.1 %   15.6 %   24.5 %

38


Table of Contents

        The following table sets forth our statements of operations data expressed as a percentage of revenue for the periods indicated.

 
  Year Ended January 31,  
 
  2011   2010   2009  

Revenue

                   
 

Equipment

    78.2 %   76.8 %   78.2 %
 

Parts

    12.9 %   14.2 %   13.8 %
 

Service

    6.7 %   7.0 %   6.4 %
 

Other, including trucking and rental

    2.2 %   2.0 %   1.6 %
               

Total revenue

    100.0 %   100.0 %   100.0 %

Total cost of revenue

    84.1 %   83.2 %   82.6 %

Gross profit

    15.9 %   16.8 %   17.4 %

Operating expenses

    11.9 %   13.0 %   12.6 %

Income from operations

    4.0 %   3.8 %   4.8 %

Other income (expense)

    (0.6 )%   (0.6 )%   (0.4 )%

Income before income taxes

    3.4 %   3.2 %   4.4 %

Provision for income taxes

    (1.4 )%   (1.3 )%   (1.8 )%

Net income

    2.0 %   1.9 %   2.6 %

Fiscal Year Ended January 31, 2011 Compared to Fiscal Year Ended January 31, 2010

Consolidated Results

Revenue

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Equipment

  $ 855,443   $ 643,186   $ 212,257     33.0 %

Parts

    140,982     119,509     21,473     18.0 %

Service

    74,506     58,983     15,523     26.3 %

Other, including trucking and rental

    23,558     17,103     6,455     37.7 %
                     
 

Total Revenue

  $ 1,094,489   $ 838,781   $ 255,708     30.5 %
                     

        The increase in revenue was primarily due to acquisitions contributing to fiscal 2011 revenue and same-store sales growth. The acquired stores contributed $68.6 million in additional total revenue, while the same-store sales growth contributed $187.1 million, an increase of 23.1% over the prior year. This revenue growth was achieved in both our Agriculture and Construction segments.

Cost of Revenue

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Equipment

  $ 773,060   $ 578,411   $ 194,649     33.7 %

Parts

    100,281     83,219     17,062     20.5 %

Service

    27,767     21,615     6,152     28.5 %

Other, including trucking and rental

    18,813     14,441     4,372     30.3 %
                     
 

Total cost of revenue

  $ 919,921   $ 697,686   $ 222,235     31.9 %
                     

39


Table of Contents

        The increase in cost of revenue was primarily due to increased revenue. Acquisitions contributed $58.1 million of the increase in total cost of revenue, while same-store sales growth contributed $164.1 million. As a percentage of revenue, cost of revenue was 84.1% for fiscal 2011 compared to 83.2% for fiscal 2010.

Gross Profit

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase/
(Decrease)
  Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Gross Profit

                         
 

Equipment

  $ 82,383   $ 64,775   $ 17,608     27.2 %
 

Parts

    40,701     36,290     4,411     12.2 %
 

Service

    46,739     37,368     9,371     25.1 %
 

Other, including trucking and rental

    4,745     2,662     2,083     78.2 %
                     
   

Total Gross Profit

  $ 174,568   $ 141,095   $ 33,473     23.7 %
                     

Gross Profit Margin

                         
 

Equipment

    9.6 %   10.1 %   (0.5 )%   (5.0 )%
 

Parts

    28.9 %   30.4 %   (1.5 )%   (4.9 )%
 

Service

    62.7 %   63.4 %   (0.7 )%   (1.1 )%
 

Other, including trucking and rental

    20.1 %   15.6 %   4.5 %   28.8 %
   

Total Gross Profit Margin

    15.9 %   16.8 %   (0.9 )%   (5.4 )%

Gross Profit Mix

                         
 

Equipment

    47.2 %   45.9 %   1.3 %   2.8 %
 

Parts

    23.3 %   25.7 %   (2.4 )%   (9.3 )%
 

Service

    26.8 %   26.5 %   0.3 %   1.1 %
 

Other, including trucking and rental

    2.7 %   1.9 %   0.8 %   42.1 %
                       
   

Total Gross Profit Mix

    100.0 %   100.0 %   0.0 %   0.0 %
                       

        The increase in gross profit was primarily due to increased revenue. Acquisitions contributed $10.5 million of the increase in total gross profit, while same-store sale gross profits provided the remaining $23.0 million. Offsetting the positive effect to gross profits of higher revenue was compression on our equipment margins, which was caused by market pricing pressures throughout much of fiscal 2011, but improved towards the end of the year due to increased market demand and an increase in the amount earned under manufacturer incentive programs, as compared to the prior year.

Operating Expenses

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Operating expenses

  $ 130,541   $ 108,998   $ 21,543     19.8 %

Operating expenses as a percentage of revenue

    11.9 %   13.0 %   (1.1 )%   (8.5 )%

        The increase in operating expenses was primarily due to the additional costs associated with acquisitions, such as compensation, rent, and depreciation. As a percentage of total revenue, operating expenses decreased to 11.9% in fiscal 2011 as compared to 13.0% in fiscal 2010 due to improve fixed operating cost leverage resulting from higher revenues.

40


Table of Contents

Other Income (Expense)

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase/
(Decrease)
  Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Interest and other income

  $ 1,794   $ 1,843   $ (49 )   (2.7 )%

Floorplan interest expense

    (7,223 )   (5,485 )   1,738     31.7 %

Interest expense

    (1,361 )   (1,463 )   (102 )   (7.0 )%

        Interest and other income for the years ended January 31, 2011 and 2010 were positively impacted by a manufacturer incentive earned in both years. The increase in floorplan interest expense of $1.7 million was due to the increase in floorplan notes payable balances as compared to fiscal 2010, offset by reductions in interest rates. We expect floorplan interest expense in fiscal 2012 to be positively impacted by lower interest rates associated with our new Credit Agreement entered into on October 31, 2010.

Provision for Income Taxes

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Provision for income taxes

  $ 14,895   $ 11,255   $ 3,640     32.3 %

        Our effective tax rate decreased from 41.7% in fiscal 2010 to 40.0% in fiscal 2011. The decrease in the effective tax rate from the prior year primarily reflects a decrease in the effect of permanent differences between financial and income tax reporting, such as incentive stock options, and reconciliation of differences between estimates used in our fiscal 2010 income tax accrual and actual amounts reported in our fiscal 2010 income tax return.

Segment Results

 
  Fiscal Year Ended
January 31, 2011
  Fiscal Year Ended
January 31, 2010
  Increase/
(Decrease)
  Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Revenues

                         

Agriculture

  $ 979,016   $ 751,258   $ 227,758     30.3 %

Construction

    152,646     116,361     36,285     31.2 %
                     

Segment revenues

    1,131,662     867,619     264,043     30.4 %

Eliminations

    (37,173 )   (28,838 )   (8,335 )   (28.9 )%
                     

Total

  $ 1,094,489   $ 838,781   $ 255,708     30.5 %
                     

Income (Loss) Before Income Taxes

                         

Agriculture

  $ 44,083   $ 36,133   $ 7,950     22.0 %

Construction

    (3,451 )   (6,837 )   3,386     49.5 %
                     

Segment income (loss) before income taxes

    40,632     29,296     11,336     38.7 %

Shared Resources

    (3,133 )   (2,120 )   (1,013 )   (47.8 )%

Eliminations

    (262 )   (184 )   (78 )   (42.4 )%
                     

Income before income taxes

  $ 37,237   $ 26,992   $ 10,245     38.0 %
                     

41


Table of Contents

Agriculture

        Agriculture revenues for fiscal 2011 increased 30.3% compared to fiscal 2010. The revenue increase was primarily due to acquisitions and an Agriculture same-store sales increase of 22.8% over fiscal 2010. The same-store sales growth was primarily caused by increased farm cash receipts and favorable harvest conditions and crop yield reports across our footprint.

        Agriculture income before income tax increased 22.0% in fiscal 2011 primarily due to higher revenues. Offsetting the positive effect to gross profits of higher revenue was compression on our equipment margins and higher floorplan interest expense, as compared to fiscal 2010. The compression on our equipment margins, which was caused by market pricing pressures throughout much of fiscal 2011, improved towards the end of the year due to increased market demand and an increase in the amount earned under manufacturer incentive programs, as compared to the prior year. Floorplan interest expense increased due to increased floorplan notes payable balances, partially offset by lower interest rates, compared to fiscal 2010. We expect floorplan interest expense in fiscal 2012 to be positively impacted by lower interest rates associated with our new Credit Agreement entered into on October 31, 2010.

Construction

        Fiscal 2011 Construction revenues increased 31.2% compared to fiscal 2010. The revenue increase was primarily due to new store openings and a Construction same-store sales increase of 24.8% as compared to fiscal 2010. A major factor contributing to our increased revenue was the continued execution of our fiscal 2011 Construction business action plan, which included changing key Construction personnel and implementing the Titan Operating Model in the Construction stores acquired in fiscal 2009.

        Loss before income taxes decreased 49.5% primarily due to higher Construction segment gross profits resulting from increased revenues, offset by higher interest expense resulting from increased long-term debt associated with rental fleet, as compared to fiscal 2010. Also contributing to the loss was $0.3 million in exit costs related to the closing of our store in Columbia Falls, Montana. We expect interest expense in fiscal 2012 to be positively impacted by lower interest rates associated with our new Credit Agreement entered into on October 31, 2010.

Shared Resources/Eliminations

        We incur centralized expenses/income at our general corporate level, which we refer to as "Shared Resources", and then allocate these net expenses to our segments. Since these allocations are set early in the year, unallocated balances may occur.

        Eliminations remove any inter-company revenues or income before tax residing in our segment results.

42


Table of Contents

Fiscal Year Ended January 31, 2010 Compared to Fiscal Year Ended January 31, 2009

Consolidated Results

Revenue

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Equipment

  $ 643,186   $ 540,307   $ 102,879     19.0 %

Parts

    119,509     94,984     24,525     25.8 %

Service

    58,983     44,224     14,759     33.4 %

Other, including trucking and rental

    17,103     10,922     6,181     56.6 %
                     
 

Total Revenue

  $ 838,781   $ 690,437   $ 148,344     21.5 %
                     

        The increase in revenue was primarily due to acquisitions contributing to fiscal 2010 revenue and same-store sales growth. The acquired stores contributed $117.0 million in additional total revenue, while the same-store sales growth contributed $31.3 million, an increase of 4.9% over the prior year. The same-store sales increase was driven by strong Agriculture segment sales offset by declines in our Construction segment. Revenue increases over the prior year in parts, service and other outpaced the increase in equipment revenue primarily due to a weak construction equipment market in fiscal 2010.

Cost of Revenue

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Equipment

  $ 578,411   $ 478,324   $ 100,087     20.9 %

Parts

    83,219     67,270     15,949     23.7 %

Service

    21,615     16,729     4,886     29.2 %

Other, including trucking and rental

    14,441     8,245     6,196     75.1 %
                     
 

Total cost of revenue

  $ 697,686   $ 570,568   $ 127,118     22.3 %
                     

        The increase in cost of revenue was primarily due to increased revenue. Acquisitions contributed $97.7 million of the increase in total cost of revenue, while same-store sales growth contributed $29.4 million. As a percentage of revenue, cost of revenue was 83.2% for fiscal 2010 compared to 82.6% for fiscal 2009.

43


Table of Contents

Gross Profit

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase/
(Decrease)
  Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Gross Profit

                         
 

Equipment

  $ 64,775   $ 61,983   $ 2,792     4.5 %
 

Parts

    36,290     27,714     8,576     30.9 %
 

Service

    37,368     27,495     9,873     35.9 %
 

Other, including trucking and rental

    2,662     2,677     (15 )   (0.6 )%
                     
   

Total Gross Profit

  $ 141,095   $ 119,869   $ 21,226     17.7 %
                     

Gross Profit Margin

                         
 

Equipment

    10.1 %   11.5 %   (1.4 )%   (12.2 )%
 

Parts

    30.4 %   29.2 %   1.2 %   4.1 %
 

Service

    63.4 %   62.2 %   1.2 %   1.9 %
 

Other, including trucking and rental

    15.6 %   24.5 %   (8.9 )%   (36.3 )%
   

Total Gross Profit Margin

    16.8 %   17.4 %   (0.6 )%   (3.4 )%

Gross Profit Mix

                         
 

Equipment

    45.9 %   51.7 %   (5.8 )%   (11.2 )%
 

Parts

    25.7 %   23.1 %   2.6 %   11.3 %
 

Service

    26.5 %   23.0 %   3.5 %   15.2 %
 

Other, including trucking and rental

    1.9 %   2.2 %   (0.3 )%   (13.6 )%
                       
   

Total Gross Profit Mix

    100.0 %   100.0 %   0.0 %   0.0 %
                       

        The increase in gross profit was primarily due to increased revenue, somewhat offset by lower equipment margins. Acquisitions contributed $19.3 million of the increase in total gross profit, while same-store sale gross profits provided the remaining $1.9 million. Gross profit margins were 16.8% for fiscal 2010 compared to 17.4% for fiscal 2009. Fiscal 2009 Agriculture equipment margins were enhanced by a tight supply of equipment that did not recur in fiscal 2010. The return to more traditional supply conditions and inventory levels also resulted in increased equipment inventory valuation charges over the prior year. Fiscal 2010 also included a reduced manufacturer market share incentive payment as compared to the prior year. The decrease in "other" margins was primarily due to a lower utilization of rental fleet that resulted from a weak fiscal 2010 construction industry.

Operating Expenses

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Operating Expenses

  $ 108,998   $ 86,940   $ 22,058     25.4 %

Operating expenses as a percentage of revenue

    13.0 %   12.6 %   0.4 %   3.2 %

        The increase in operating expenses was primarily due to the additional costs associated with acquisitions, such as compensation, rent, depreciation, travel and training. As a percentage of total revenue, operating expenses increased slightly to 13.0% in fiscal 2010 as compared to 12.6% in fiscal 2009. This increase from the prior year was due to the increased number of stores in our Construction segment, which have higher operating expenses as a percent of revenue, as well as lower revenues due to the challenging construction market, as compared to the same period of fiscal 2009.

44


Table of Contents

Other Income (Expense)

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Interest and other income

  $ 1,843   $ 1,545   $ 298     19.3 %

Floorplan interest expense

    (5,485 )   (3,240 )   2,245     69.3 %

Interest expense

    (1,463 )   (729 )   734     100.7 %

        Interest and other income increased $0.3 million as we received a manufacturer financing incentive in the fourth quarter of fiscal 2010, offset by a decrease in interest income from investing our cash balances in highly secure investments in fiscal 2010 that carried lower interest rates than those earned in fiscal 2009. The increase in floorplan interest expense of $2.2 million was due to the increase in floorplan notes payable balances as compared to fiscal 2009, as well as increased interest rates. The increase in interest expense of $0.7 million resulted from higher long-term debt balances as compared to fiscal 2009.

Provision for Income Taxes

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Decrease   Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Provision for income taxes

  $ 11,255   $ 12,430   $ (1,175 )   (9.5 )%

        Our effective tax rate increased from 40.7% in fiscal 2009 to 41.7% in fiscal 2010. The increase in the effective tax rate from the prior year primarily reflects an increase in permanent differences between financial and income tax reporting, such as the increase in stock option expense over the prior year.

Segment Results

 
  Fiscal Year Ended
January 31, 2010
  Fiscal Year Ended
January 31, 2009
  Increase/
(Decrease)
  Percent
Change
 
 
   
  (dollars in thousands)
   
   
 

Revenues

                         

Agriculture

  $ 751,258   $ 624,035   $ 127,223     20.4 %

Construction

    116,361     88,032     28,329     32.2 %
                     

Segment revenues

    867,619     712,067     155,552     21.8 %

Eliminations

    (28,838 )   (21,630 )   (7,208 )   (33.3 )%
                     

Total

  $ 838,781   $ 690,437   $ 148,344     21.5 %
                     

Income (Loss) Before Income Taxes

                         

Agriculture

  $ 36,133   $ 32,023   $ 4,110     12.8 %

Construction

    (6,837 )   604     (7,441 )   (1232.0 )%
                     

Segment income (loss) before income taxes

    29,296     32,627     (3,331 )   (10.2 )%

Shared Resources

    (2,120 )   (1,678 )   (442 )   (26.3 )%

Eliminations

    (184 )   (444 )   260     58.6 %
                     

Income before income taxes

  $ 26,992   $ 30,505   $ (3,513 )   (11.5 )%
                     

Agriculture

        Fiscal 2010 Agriculture revenues increased 20.4% compared to fiscal 2009. The revenue increase was due to acquisitions and an Agriculture same-store sales increase of 8.2% over fiscal 2009. Income

45


Table of Contents


before income tax increased 12.8% due to increased revenues, which generated additional gross profits and greater fixed operating expense utilization compared to the prior year. These increases were somewhat offset by lower Agriculture gross profit margins due to greater agriculture equipment supply and availability and a lower manufacturer market share incentive payment in the current year compared to fiscal 2009.

Construction

        Fiscal 2010 Construction revenues increased 32.2% compared to fiscal 2009. The revenue increase was due to acquisitions offset by a Construction same-store sales decrease of 26.8% as compared to fiscal 2009. Both acquisition and same-store revenue were negatively impacted by a weak fiscal 2010 construction market. The lower Construction revenue drove the $7.4 million decrease in income (loss) before income taxes through lower gross profits and lower fixed operating expense utilization. Construction operating expense as a percent of sales was 23.7% in fiscal 2010 compared to 16.4% in fiscal 2009.

Shared Resources/Eliminations

        We incur centralized expenses/income at our general corporate level, which we refer to as "Shared Resources", and then allocate these net expenses to our segments. Since these allocations are set early in the year, unallocated balances may occur. The Shared Resources amount increased $0.4 in fiscal 2010 compared to the prior year.

        Eliminations remove any inter-company revenues or income before tax residing in our segment results.

Liquidity and Capital Resources

Cash Flow From Operating Activities

        During fiscal 2011, cash flow used for operating activities was $35.0 million. Our cash flows from operations were primarily the result of our reported net income of $22.3 million and non-cash adjustments to net income for depreciation and amortization of $9.0 million and a net increase in accounts payable, customer deposits, accrued expenses and other long-term liabilities of $23.2 million. These operating cash inflows were principally offset by an increase in inventories of $63.1 million, a net increase in receivables, prepaid expenses and other assets of $19.9 million and a net decrease in floorplan notes payable of $13.0 million. The increase in inventories was primarily the result of our growth through acquisitions and inventory balances that reflect historical stocking levels.

        During fiscal 2010, cash flow used for operating activities was $47.7 million. Our cash flows from operations were primarily the result of our reported net income of $15.7 million and non-cash adjustments to net income for depreciation and amortization of $8.0 million. These operating cash inflows were principally offset by an increase in inventories of $61.2 million, a net decrease in accounts payable, customer deposits, accrued expenses and other long-term liabilities of $6.6 million and a net decrease in floorplan notes payable of $3.7 million. The increase in inventories was primarily the result of our growth through acquisitions and inventory balances that reflect historical stocking levels.

        During fiscal 2009, cash flow provided by operating activities was $4.2 million. Our cash flows from operations were primarily the result of our reported net income of $18.1 million, non-cash adjustments to net income for depreciation and amortization of $4.6 million, a net decrease in receivables, prepaid expenses and other assets of $7.0 million, an increase in floorplan notes payable of $5.4 million and a net increase in accounts payable, customer deposits, accrued expenses and other long-term liabilities of $3.8. These operating cash inflows were principally offset by an increase in inventories of $34.8 million.

46


Table of Contents


The increase in inventories was primarily the result of our growth through acquisitions and purchasing to support our increased sales activity during fiscal 2009.

        We evaluate our cash flow from operating activities net of all floorplan activity and short-term advances related to customer contracts in transit. Taking these adjustments into account, our non-GAAP cash flow provided by operating activities was $47.0 million, $4.6 million and $13.3 million, for fiscal 2011, 2010 and 2009, respectively. For reconciliation of this non-GAAP financial measure, please see the Non-GAAP Cash Flow Reconciliation below.

Cash Flow From Investing Activities

        During fiscal 2011, cash used for investing activities was $48.4 million. Our cash used for investing activities primarily consisted of purchases of equipment dealerships (net of cash purchased) of $32.3 million and property and equipment purchases of $16.7 million.

        During fiscal 2010, cash provided by investing activities was $25.7 million. Our cash provided by investing activities primarily consisted of net sales of U.S. treasury bills of $45.0 million, offset by purchases of equipment dealerships (net of cash purchased) of $7.3 million and property and equipment purchases of $12.4 million.

        During fiscal 2009, cash used for investing activities was $87.3 million. Our cash used for investing activities primarily consisted of net purchases of U.S. treasury bills of $45.0 million following our follow-on common stock offering, purchases of equipment dealerships (net of cash purchased) of $35.5 million and property and equipment purchases of $7.2 million.

Cash Flow From Financing Activities

        During fiscal 2011, cash provided by financing activities was $83.4 million. Cash provided by financing activities was primarily the result of an increase in our non-manufacturer floorplan notes payable of $82.4 million. During fiscal 2011, the increase in floorplan financing with non-manufacturers resulted from borrowings under our new Credit Agreement.

        During fiscal 2010, cash provided by financing activities was $57.1 million. Cash provided by financing activities was primarily the result of an increase in our non-manufacturer floorplan notes payable of $51.4 million and proceeds from long-term debt exceeding principal payments by $4.8 million. During fiscal 2010, we increased our floorplan financing with non-manufacturers in order to take advantage of the lower interest rates offered by these entities.

        During fiscal 2009, cash provided by financing activities was $81.3 million. Cash provided by financing activities was primarily the result of $78.8 million in net proceeds from our follow-on offering and an increase in our non-manufacturer floorplan notes payable of $9.1 million. Partially offsetting these proceeds were principal payments on long-term debt exceeding proceeds from long-term debt by $6.7 million.

Non-GAAP Cash Flow Reconciliation

        Non-GAAP cash flow provided by (used for) operating activities is a non-GAAP financial measure which is adjusted for the following:

47


Table of Contents

        We believe that the presentation of non-GAAP cash flow provided by (used for) operating activities is relevant and useful to our investors because it provides information on activities we consider normal operations of our business, regardless of financing source. The following table reconciles net cash flow provided by (used for) operating activities, a GAAP measure, to non-GAAP cash flow provided by operating activities and net cash provided by financing activities, a GAAP measure, to non-GAAP cash flow provided by financing activities (in thousands):

 
  As Reported   Adjustment
(1)
  Adjustment
(2)
  Non-GAAP
Measures
 

Fiscal 2011:

                         

Net cash provided by (used for) operating activities

  $ (35,008 ) $ 82,371   $ (392 ) $ 46,971  

Net cash provided by financing activities

    83,383     (82,371 )   392     1,404  

Fiscal 2010:

                         

Net cash provided by (used for) operating activities

  $ (47,661 ) $ 51,448   $ 780   $ 4,567  

Net cash provided by financing activities

    57,069     (51,448 )   (780 )   4,841  

Fiscal 2009:

                         

Net cash provided by operating activities

  $ 4,215   $ 9,094   $   $ 13,309  

Net cash provided by financing activities

    81,310     (9,094 )       72,216  

(1)
Net change in non-manufacturer floorplan notes payable

(2)
Net change in short-term advances related to customer contracts in transit

Debt Facilities

        Senior Secured Credit Facility.    We currently have a Credit Agreement with the Wells Fargo Bank Syndicate. The Credit Agreement provides for a $175.0 million wholesale floorplan line of credit (the "Floorplan Line") and a $50.0 million working capital line of credit (the "Working Capital Line"), both of which expire October 31, 2014. The Credit Agreement has a variable interest rate on outstanding balances of LIBOR plus an applicable margin of 1.5% to 2.0% per annum, depending upon our consolidated leverage ratio, has a 0.2% to 0.4% non-usage fee on the average monthly unused amount and requires monthly payments of accrued interest. The Credit Agreement is secured by all our assets and contains certain financial covenants that impose a minimum level of fixed charge coverage ratio and a maximum level of debt to tangible net worth ratio and includes annual thresholds for acquisitions and capital expenditures. The Credit Agreement also restricts our ability to pay cash dividends to an amount not to exceed 50% of consolidated net income for the then trailing four quarters, so long as no default of event of default exists prior to or immediately following such action or otherwise results from such action. The Credit Agreement became effective on November 2, 2010.

        The Floorplan Line is used to finance equipment inventory purchases. Amounts outstanding are recorded as floorplan notes payable, within current liabilities on the consolidated balance sheets as we intend to repay amounts borrowed within one year. As of January 31, 2011 we had $117.4 million outstanding on the Floorplan Line.

48


Table of Contents

        The Working Capital Line is used to finance our working capital requirements. Amounts outstanding will be recorded as long-term debt, within long-term liabilities on the consolidated balance sheets, as we do not have the intention or obligation to repay amounts borrowed within one year. As of January 31, 2011 we had $26.4 million outstanding on the Working Capital Line.

        CNH Capital Credit Facility.    We currently have a credit facility with CNH Capital that provides for an aggregate principal balance of up to $300.0 million for floorplan financing, the availability of which is reduced by outstanding floorplan notes payable, rental fleet financing and other acquisition-related financing arrangements with CNH Capital, as described below. Interest rates are currently equal to the prime rate plus 4% on new borrowings, subject to any interest-free periods offered by CNH Capital. The CNH Capital term loans and loans for certain purposes have interest rates equal to the prime rate plus 4% per annum. Cumulative and unpaid balance of advances under the CNH Capital credit facility accrues interest each month and requires monthly payments. The CNH Capital credit facility automatically renews on August 31 of each year through August 31, 2012, unless earlier terminated by either party. The CNH Capital credit facility is secured by the financed assets. As of January 31, 2011, we had approximately $171.4 million outstanding on the CNH Capital credit facility. The CNH Capital credit facility contains covenants that require the Company to maintain various financial ratio levels and to submit certain financial information. It also contains various restrictive covenants that require the prior consent of CNH Capital if we desire to engage in any acquisition of, or consolidation or merger with, any other business entity in which we are not the surviving company; create subsidiaries; move any collateral outside of the U.S.; or sell, rent, lease or otherwise dispose or transfer any of the collateral, other than in the ordinary course of business. CNH's consent is also required for the acquisition of any CNH dealership. In addition, the CNH Capital credit facility restricts our ability to incur any liens upon any substantial part of our assets.

        Other Indebtedness with CNH Capital.    CNH Capital periodically provides loans for fixed asset financing in connection with acquisitions. Related to this acquisition financing, we have various term loans with CNH Capital. The aggregate principal amount of these terms loans was approximately $0.2 million at January 31, 2011. We also obtained variable rate notes at the prime rate plus 4% per annum from CNH Capital, which are secured by our designated rental fleet. The amount of our rental fleet notes as of January 31, 2011, was $1.0 million.

        Agricredit Credit Facility.    We currently have a credit facility with Agricredit Acceptance LLC ("Agricredit") that provides for an aggregate principal balance of up to $75.0 million. The Agricredit credit facility may be used to purchase or refinance new and used equipment inventory. The interest rate on borrowings under the Agricredit credit facility is equal to the three-month LIBOR rate plus 5.25%. The Agricredit credit facility allows for increase, decrease or termination of the credit facility by Agricredit on 90 days notice. Under covenants of the Agricredit credit facility, the Company has agreed, among other things, to maintain various financial ratio levels, to submit certain financial information, and to obtain prior consent from Agricredit if the Company desires to engage in any acquisition meeting certain financial thresholds. The balances outstanding with Agricredit are secured by the related inventory. Repayment terms vary by individual notes, but generally payments are made from sales proceeds or rental revenue from the related inventories.

Sources of Liquidity

        Our primary sources of liquidity are cash reserves, cash flow from operations, proceeds from the issuance of debt and borrowings under our credit facilities. We expect that ongoing requirements for debt service and capital expenditures will be funded from these sources.

49


Table of Contents

Adequacy of Capital Resources

        Our primary uses of cash have been to fund our strategic acquisitions, finance the purchase of inventory, meet debt service requirements and fund operating activities, working capital, payments due under building space operating leases and manufacturer floorplans payable. The primary factors affecting our ability to generate cash and to meet existing, known or reasonably likely cash requirements are the timing and extent of acquisitions and our operating performance as impacted by (i) industry factors, (ii) competition, (iii) general economic conditions and (iv) other business factors as identified in Item 1A "Risk Factors."

        For fiscal 2011 and 2010, our cash expenditures on property and equipment were $16.7 million and $12.4 million, respectively, exclusive of acquisitions, transfers between equipment inventory and our designated rental fleet, and property and equipment purchased with long-term debt. Excluding cash expenditures on rental fleet equipment, cash expenditures on property and equipment was $13.3 million in fiscal 2011. We expect our property and equipment expenditures, exclusive of acquisitions, for fiscal 2012 to be approximately $13.0 to $15.0 million. The actual amount of our fiscal 2012 equipment expenditures will depend upon factors such as general economic conditions, growth prospects for our industry and our acquisition activity. We currently expect to finance equipment purchases with borrowings under the existing credit facilities, with available cash or with cash flow from operations. We may need to incur additional debt if we pursue any future acquisitions.

        Our ability to service our debt will depend upon our ability to generate the necessary cash. This will depend on our future acquisitions activity, operating performance, general economic conditions, and financial, competitive, business and other factors, some of which are beyond our immediate control. Based on our current operational performance, we believe our cash flow from operations, available cash and available borrowings under the existing credit facilities will adequately provide our liquidity needs for, at a minimum, the next 12 months.

        We cannot assure you, however, that our business will generate sufficient cash flow from operations or that future borrowings will be available under the credit facilities with the Wells Fargo Bank Syndicate and CNH Capital in amounts sufficient to allow us to service our indebtedness and to meet our other commitments. If we are unable to generate sufficient cash flow from operations or to obtain sufficient future borrowings, we may be required to seek one or more alternatives such as refinancing or restructuring our indebtedness, selling material assets or operations or seeking to raise additional debt or equity capital. We cannot assure you that we will be able to succeed with one of these alternatives on commercially reasonable terms, if at all. In addition, if we pursue strategic acquisitions, we may require additional equity or debt financing to consummate the transactions, and we cannot assure you that we will succeed in obtaining this financing on favorable terms or at all. If we incur additional indebtedness to finance any of these transactions, this may place increased demands on our cash flow from operations to service the resulting increased debt. Our existing debt agreements contain restrictive covenants that may restrict our ability to adopt any of these alternatives. Any non-compliance by us under the terms of our debt agreements could result in an event of default which, if not cured, could result in the acceleration of our debt.

Certain Information Concerning Off-Balance Sheet Arrangements

        As of January 31, 2011, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. We are, therefore, not exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in these relationships. In the normal course of our business activities, we lease rental equipment under operating leases.

50


Table of Contents

Contractual Obligation and Commercial Commitment Summary

        Our contractual obligations and commercial commitments as of January 31, 2011 are summarized below:

 
   
  Payments Due By Period  
Contractual Obligations
  Total   Less Than
1 Year
  1 to 3 Years   3 to 5 Years   More Than
5 Years
 
 
  (in thousands)
 

Long-term debt obligations(1)

  $ 41,097   $ 5,303   $ 6,420   $ 28,965   $ 409  

Operating lease(2)

    80,168     11,305     20,132     18,302     30,429  

Other long-term liabilities(3)

    3,595         3,595          
                       
 

Total

  $ 124,860   $ 16,608   $ 30,147   $ 47,267   $ 30,838  
                       

(1)
Includes obligations under notes payable issued in favor of our lenders and estimates of interest payable.

(2)
Includes minimum lease payment obligations under operating leases related to our stores. Amounts do not include insurance or tax, which we include in our operating expenses and which we estimate will be approximately $1.0 million for the less than 1 year period, $1.9 million for the 1-3 year period, $1.8 million for the 3-5 year period, and $2.9 million for the more than 5 years period for a total of approximately $7.6 million. See Note 9 to our audited financial statements for a description of our operating lease obligations.

(3)
Includes long-term portion of trade payables.

New Accounting Pronouncements

        In December 2010, the FASB amended authoritative guidance on business combinations, codified in ASC 805, Business Combinations. This guidance clarifies that, when presenting comparative financial statements, registrants should disclose revenue and earnings of the combined entity as though the current period business combinations had occurred as of the beginning of the comparable prior annual reporting period. The guidance also expands the supplemental pro forma disclosures to include a description of the nature and amount of material, nonrecurring pro forma adjustments directly attributable to the business combination included in the reported pro forma revenue and earnings. ASU 2010-29 is effective prospectively for material (either on an individual or aggregate basis) business combinations entered into in fiscal years beginning on or after December 15, 2010 with early adoption permitted. We adopted this guidance on February 1, 2011 and do not expect it to have a material impact on our consolidated financial statements.

        In December 2010, the FASB amended authoritative guidance on goodwill impairment testing, codified in ASC 305, Intangibles—Goodwill and Other. This guidance modifies Step 1 of the goodwill impairment test for reporting units with zero or negative carrying amounts, and requires performance of Step 2 of the goodwill impairment test for such reporting units if it is more likely than not that, when considering qualitative factors, an impairment exists. We adopted this guidance on February 1, 2011 and do not expect it to have a material impact on our consolidated financial statements.

        In July 2010, the FASB issued authoritative guidance on financing receivables and the allowance for credit losses, codified in ASC 310, Receivables. This guidance amends the current disclosure requirements to provide a greater level of disaggregated information about the credit quality of an entity's financing receivables and its allowance for credit losses. The guidance also requires an entity to disclose credit quality indicators, past due information, and modifications of its financing receivables. We adopted this guidance in the quarter ended January 31, 2011. Its adoption did not have a material effect on our consolidated financial statements based on the nature of our receivables.

51


Table of Contents

        In January 2010, the FASB issued authoritative guidance on fair value measurements, codified in ASC 820, Fair Value Measurements and Disclosures. This guidance required additional disclosure of significant transfers in and out of Level 1 and Level 2 fair value measurements and activity in Level 3 fair value measurements. It also clarified existing disclosure requirements regarding level of disaggregation and valuation inputs and techniques. The guidance is effective for interim and annual reporting periods beginning after December 15, 2009, except for the disclosure of the Level 3 activity, which is effective for interim and fiscal years beginning after December 15, 2010. We adopted these provisions on February 1, 2010, except for the Level 3 activity disclosures, which we adopted on February 1, 2011. The adoption of the guidance did not have, and we do not expect the adoption of the Level 3 activity disclosures to have, a material impact on our consolidated financial statements.

        In October 2009, the FASB issued authoritative guidance on revenue recognition, codified in ASC 605-25, Revenue Recognition. This guidance modifies the fair value requirements of revenue recognition on multiple element arrangements by allowing the use of the "best estimate of selling price" in addition to vendor specific objective evidence and third-party evidence for determining the selling price of a deliverable. This guidance establishes a selling price hierarchy for determining the selling price of a deliverable, which is based on: (a) vendor-specific objective evidence, (b) third-party evidence, or (c) estimates. In addition, the guidance eliminates the residual method of allocation and significantly expands the disclosure requirements for such arrangements. We adopted this guidance on February 1, 2011. Its adoption did not have a material effect on our consolidated financial statements.

        In June 2009, the FASB issued authoritative guidance on the consolidation of variable interest entities ("VIEs"), codified in ASC 810, Consolidation. This guidance eliminates the exemption for qualifying special-purpose entities, amends the approach companies use to identify the VIEs for which they are deemed to be the primary beneficiary and are required to consolidate, and requires additional disclosure of an entity's involvement with a VIE. The guidance requires companies to perform ongoing reassessments of whether it is the primary beneficiary of a VIE. This assessment no longer includes the quantitative-based assessment, and instead requires a qualitative assessment of whether a company has the power to direct the VIE's activities that most significantly impact the company's economic performance and whether the entity has the obligation to absorb losses or the right to receive benefits that could be significant to the VIE. We adopted this guidance on February 1, 2010. Its adoption did not have a material effect on our consolidated financial statements.

        In April 2009, the FASB issued authoritative guidance on the accounting and disclosure of assets acquired and liabilities assumed in a business combination that arise from contingencies, and subsequent accounting for these contingencies. This guidance was codified in ASC 805, Business Combinations. We adopted this guidance on February 1, 2010. Its adoption did not have a material effect on our consolidated financial statements based on the nature of the assets acquired and liabilities assumed in our business combinations.

Information Regarding Forward-Looking Statements

        The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements. Such "forward-looking" information is included in this Form 10-K, including this Item 7, as well as in other materials filed or to be filed by us with the Securities and Exchange Commission (as well as information included in oral statements or other written statements made or to be made by the Company).

        This Form 10-K contains forward-looking statements that involve risks and uncertainties. In some cases, you can identify forward-looking statements by the following words: "anticipate," "believe," "continue," "could," "estimate," "expect," "intend," "may," "ongoing," "plan," "potential," "predict," "project," "should," "will," "would," or the negative of these terms or other comparable terminology, although not all forward-looking statements contain these words. These statements involve known and

52


Table of Contents


unknown risks, uncertainties and other factors that may cause our or our industry's actual results, levels of activity, performance or achievements to be materially different from the information expressed or implied by these forward-looking statements. Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Our forward-looking statements in this Form 10-K generally relate to the following:

        Forward-looking statements are only predictions and are not guarantees of performance. These statements are based on our management's beliefs and assumptions, which in turn are based on currently available information. Important assumptions relating to the forward-looking statements include, among others, assumptions regarding demand for our products, the expansion of product offerings geographically, the timing and cost of planned capital expenditures, competitive conditions and general economic conditions. These assumptions could prove inaccurate. Forward-looking statements also involve known and unknown risks and uncertainties, which could cause actual results that differ materially from those contained in any forward-looking statement. Many of these factors are beyond our ability to control or predict. Such factors include, but are not limited to, the following:

53


Table of Contents

        You should read the risk factors and the other cautionary statements made in this Form 10-K as being applicable to all related forward-looking statements wherever they appear in this Form 10-K. We cannot assure you that the forward-looking statements in this Form 10-K will prove to be accurate. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. In light of the significant uncertainties in these forward-looking statements, you should not regard these statements as a representation or warranty by us or any other person that we will achieve our objectives and plans in any specified time frame, if at all. Other than as required by law, we undertake no obligation to update these forward-looking statements, even though our situation may change in the future.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

        We are exposed to market risk from changes in interest rates. Market risk is the potential loss arising from adverse changes in market rates and prices such as interest rates. For fixed rate debt, interest rate changes affect the fair value of financial instruments but do not impact earnings or cash flows. Conversely, for floating rate debt, interest rate changes generally do not affect the fair market value but do impact future earnings and cash flows, assuming other factors are held constant. We have both fixed and floating rate financing. Some of our floating rate credit facilities contain minimum rates of interest to be charged. Based upon balances and interest rates as of January 31, 2011, holding other variables constant, a one percentage point increase in interest rates for the next 12-month period would decrease pre-tax earnings and cash flow by approximately $2.0 million. Conversely, a one percentage point decrease in interest rates for the next 12-month period would result in an increase to pre-tax earnings and cash flow of approximately $2.0 million. At January 31, 2011, we had variable rate floorplan notes payable of $320.8 million, of which approximately $166.8 million was interest-bearing, variable notes payable and long-term debt of $28.6 million, and fixed rate notes payable and long-term debt of $9.0 million.

        Our policy is not to enter into derivatives or other financial instruments for trading or speculative purposes.

54


Table of Contents

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

        The Consolidated Balance Sheets of the Company as of January 31, 2011 and 2010, and the related Consolidated Statements of Operations, Stockholders' Equity, and Cash Flows for each of the three years in the period ended January 31, 2011, and the notes thereto have been audited by Eide Bailly LLP, independent registered public accounting firm.


INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 
  Page  

Titan Machinery Inc.—Financial Statements

       

Audited Consolidated Financial Statements

       
 

Report of Independent Registered Public Accounting Firm

    56  
 

Report of Independent Registered Public Accounting Firm

    57  
 

Consolidated Balance Sheets as of January 31, 2011 and 2010

    58  
 

Consolidated Statements of Operations for the fiscal years ended January 31, 2011, 2010 and 2009

    59  
 

Consolidated Statements of Stockholders' Equity for the fiscal years ended January 31, 2011, 2010 and 2009

    60  
 

Consolidated Statements of Cash Flows for the fiscal years ended January 31, 2011, 2010 and 2009

    61  
 

Notes to Consolidated Financial Statements

    63  

55


Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders
Titan Machinery Inc.
Fargo, North Dakota

        We have audited the accompanying consolidated balance sheets of Titan Machinery Inc. as of January 31, 2011 and 2010, and the related consolidated statements of operations, stockholders' equity, and cash flows for each of the years in the three-year period ended January 31, 2011, and the financial statement schedule listed in the Index at Item 15. Titan Machinery Inc.'s management is responsible for these consolidated financial statements. Our responsibility is to express an opinion on these financial statements based on our audits.

        We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Titan Machinery Inc. as of January 31, 2011 and 2010, and the results of its operations and its cash flows for each of the years in the three-year period ended January 31, 2011, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the financial statement schedule referred to above, when considered in relation to the consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

        We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Titan Machinery Inc.'s internal control over financial reporting as of January 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated April 18, 2011, expressed an unqualified opinion.

/s/ Eide Bailly LLP

Minneapolis, Minnesota
April 18, 2011

56


Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders
Titan Machinery Inc.
Fargo, North Dakota

        We have audited Titan Machinery Inc.'s internal control over financial reporting as of January 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Titan Machinery Inc.'s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company's internal control over financial reporting based on our audit.

        We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

        A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

        Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

        In our opinion, Titan Machinery Inc. maintained, in all material respects, effective internal control over financial reporting as of January 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

        We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets and the related consolidated statements of operations, stockholders' equity, and cash flows of Titan Machinery Inc., and our report dated April 18, 2011, expressed an unqualified opinion.

/s/ Eide Bailly LLP

Minneapolis, Minnesota
April 18, 2011

57


Table of Contents


TITAN MACHINERY INC.

CONSOLIDATED BALANCE SHEETS

JANUARY 31, 2011 AND 2010

(in thousands, except per share data)

 
  January 31,
2011
  January 31,
2010
 

ASSETS

             

CURRENT ASSETS

             
 

Cash and cash equivalents

  $ 76,112   $ 76,185  
 

Receivables, net

    44,945     22,254  
 

Inventories

    429,844     347,580  
 

Prepaid expenses

    1,003     1,009  
 

Income taxes receivable

        1,595  
 

Deferred income taxes

    3,247     2,266  
           
   

Total current assets

    555,151     450,889  
           

INTANGIBLES AND OTHER ASSETS

             
 

Noncurrent parts inventories

    2,405     1,642  
 

Goodwill

    18,391     14,762  
 

Intangible assets, net of accumulated amortization

    4,734     295  
 

Other

    2,793     620  
           

    28,323     17,319  
           

PROPERTY AND EQUIPMENT, net of accumulated depreciation

    65,372     46,604  
           

  $ 648,846   $ 514,812  
           

LIABILITIES AND STOCKHOLDERS' EQUITY

             

CURRENT LIABILITIES

             
 

Accounts payable

  $ 15,957   $ 12,352  
 

Floorplan notes payable

    320,801     249,872  
 

Current maturities of long-term debt and short-term advances

    4,207     7,218  
 

Customer deposits

    28,180     12,974  
 

Accrued expenses

    16,816     9,870  
 

Income taxes payable

    2,093      
           
   

Total current liabilities

    388,054     292,286  
           

LONG-TERM LIABILITIES

             
 

Long-term debt, less current maturities

    33,409     21,852  
 

Deferred income taxes

    9,012     6,356  
 

Other long-term liabilities

    3,814     3,794  
           

    46,235     32,002  
           

STOCKHOLDERS' EQUITY

             
 

Common stock, par value $.00001 per share, authorized—25,000 shares; issued and outstanding—17,917 at January 31, 2011 and 17,777 at January 31, 2010

         
 

Additional paid-in-capital

    140,466     138,775  
 

Retained earnings

    74,091     51,749  
           

    214,557     190,524  
           

  $ 648,846   $ 514,812  
           

See Notes to Consolidated Financial Statements

58


Table of Contents


TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

YEARS ENDED JANUARY 31, 2011, 2010 AND 2009

(in thousands, except per share data)

 
  2011   2010   2009  

REVENUE

                   
 

Equipment

  $ 855,443   $ 643,186   $ 540,307  
 

Parts

    140,982     119,509     94,984  
 

Service

    74,506     58,983     44,224  
 

Other, including trucking and rental

    23,558     17,103     10,922  
               

TOTAL REVENUE

    1,094,489     838,781     690,437  
               

COST OF REVENUE

                   
 

Equipment

    773,060     578,411     478,324  
 

Parts

    100,281     83,219     67,270  
 

Service

    27,767     21,615     16,729  
 

Other, including trucking and rental

    18,813     14,441     8,245  
               

TOTAL COST OF REVENUE

    919,921     697,686     570,568  
               

GROSS PROFIT

    174,568     141,095     119,869  

OPERATING EXPENSES

    130,541     108,998     86,940  
               

INCOME FROM OPERATIONS

    44,027     32,097     32,929  

OTHER INCOME (EXPENSE)

                   
 

Interest and other income

    1,794     1,843     1,545  
 

Floorplan interest expense

    (7,223 )   (5,485 )   (3,240 )
 

Interest expense other

    (1,361 )   (1,463 )   (729 )
               

INCOME BEFORE INCOME TAXES

    37,237     26,992     30,505  

PROVISION FOR INCOME TAXES

    (14,895 )   (11,255 )   (12,430 )
               

NET INCOME

  $ 22,342   $ 15,737   $ 18,075  
               

EARNINGS PER SHARE—NOTE 1

                   

EARNINGS PER SHARE—BASIC

  $ 1.27   $ 0.89   $ 1.11  
               

EARNINGS PER SHARE—DILUTED

  $ 1.23   $ 0.88   $ 1.08  
               

WEIGHTED AVERAGE SHARES—BASIC

    17,658     17,593     16,291  

WEIGHTED AVERAGE SHARES—DILUTED

    18,146     17,968     16,779  

See Notes to Consolidated Financial Statements

59


Table of Contents


TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY

YEARS ENDED JANUARY 31, 2011, 2010 AND 2009

(in thousands)

 
  Common Stock    
   
   
 
 
  Shares
Outstanding
  Amount   Additional
Paid-In
Capital
  Retained
Earnings
  Total  

BALANCE, JANUARY 31, 2008

    13,441   $   $ 58,180   $ 17,937   $ 76,117  
 

Common stock issued in follow-on offering

    4,180         78,815         78,815  
 

Common stock issued on grant of restricted stock and exercise of stock options and warrants

    36         68         68  
 

Stock-based compensation expense

            692         692  
 

Net income

                18,075     18,075  
                       

BALANCE, JANUARY 31, 2009

   
17,657
   
   
137,755
   
36,012
   
173,767
 
 

Common stock issued on grant of restricted stock and exercise of stock options and warrants

    120         58         58  
 

Stock-based compensation expense

            962         962  
 

Net income

                15,737     15,737  
                       

BALANCE, JANUARY 31, 2010

   
17,777
   
   
138,775
   
51,749
   
190,524
 
 

Common stock issued on grant of restricted stock and exercise of stock options and warrants and tax benefits of equity awards

    140         534         534  
 

Stock-based compensation expense

            1,157         1,157  
 

Net income

                22,342     22,342  
                       

BALANCE, JANUARY 31, 2011

   
17,917
 
$

 
$

140,466
 
$

74,091
 
$

214,557
 
                       

See Notes to Consolidated Financial Statements

60


Table of Contents


TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

YEARS ENDED JANUARY 31, 2011, 2010 AND 2009

(in thousands)

 
  2011   2010   2009  

OPERATING ACTIVITIES

                   
 

Net income

  $ 22,342   $ 15,737   $ 18,075  
 

Adjustments to reconcile net income to net cash provided by (used for) operating activities

                   
   

Depreciation and amortization

    8,969     7,950     4,583  
   

Deferred income taxes

    1,675     1,850     968  
   

Stock-based compensation expense

    1,157     962     692  
   

Other

    (111 )   (15 )   (9 )
 

Changes in assets and liabilities, net of purchase of equipment dealerships assets and assumption of liabilities

                   
   

Receivables, prepaid expenses and other assets

    (19,873 )   (2,481 )   6,993  
   

Inventories

    (63,108 )   (61,244 )   (34,842 )
   

Floorplan notes payable

    (12,992 )   (3,660 )   5,380  
   

Accounts payable, customer deposits, accrued expenses and other long-term liabilities

    23,245     (6,649 )   3,833  
   

Income taxes

    3,688     (111 )   (1,458 )
               

NET CASH PROVIDED BY (USED FOR) OPERATING ACTIVITIES

    (35,008 )   (47,661 )   4,215  
               

INVESTING ACTIVITIES

                   
 

Net change in U.S. treasury bills

        44,994     (44,994 )
 

Property and equipment purchases

    (16,732 )   (12,394 )   (7,228 )
 

Net proceeds from sale of equipment

    892     396     462  
 

Purchase of equipment dealerships, net of cash purchased

    (32,312 )   (7,266 )   (35,521 )
 

Other, net

    (296 )        
               

NET CASH PROVIDED BY (USED FOR) INVESTING ACTIVITIES

    (48,448 )   25,730     (87,281 )
               

FINANCING ACTIVITIES

                   
 

Proceeds from follow-on offering of common stock, net of underwriting discount of $4,389 and other direct costs of $396

            78,815  
 

Net change in non-manufacturer floorplan notes payable

    82,371     51,448     9,094  
 

Short-term advances related to customer contracts in transit, net

    (392 )   780      
 

Proceeds from long-term debt borrowings

    23,259     23,914     12,368  
 

Principal payments on long-term debt and subordinated debentures

    (20,385 )   (19,066 )   (19,034 )
 

Debt issuance costs

    (2,004 )   (65 )    
 

Proceeds from exercise of stock options and warrants, and tax benefits of equity awards

    534     58     67  
               

NET CASH PROVIDED BY FINANCING ACTIVITIES

   
83,383
   
57,069
   
81,310
 
               

NET CHANGE IN CASH AND CASH EQUIVALENTS

   
(73

)
 
35,138
   
(1,756

)

CASH AND CASH EQUIVALENTS AT BEGINNING OF PERIOD

   
76,185
   
41,047
   
42,803
 
               

CASH AND CASH EQUIVALENTS AT END OF PERIOD

 
$

76,112
 
$

76,185
 
$

41,047
 
               

61


Table of Contents


TITAN MACHINERY INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS (Continued)

YEARS ENDED JANUARY 31, 2011, 2010 AND 2009

(in thousands)

 

 
  2011   2010   2009  

SUPPLEMENTAL DISCLOSURES OF CASH FLOW INFORMATION

                   
 

Cash paid during the period

                   
   

Income taxes, net of refunds

  $ 9,226   $ 10,287   $ 12,894  
               
   

Interest

  $ 9,103   $ 6,311   $ 4,037  
               

SUPPLEMENTAL DISCLOSURES OF NONCASH INVESTING AND FINANCING ACTIVITIES

                   
 

Property and equipment purchased with long-term debt

  $ 2,980   $ 2,312   $ 979  
               
 

Net transfer of equipment from (to) fixed assets to (from) inventories

  $ (3,219 ) $ 6,528   $ (3,631 )
               
 

Net transfer of financing from (to) long-term debt to (from) floorplan notes payable

  $ (3,084 ) $ 3,180   $  
               
 

Acquisition of equipment dealership assets in exchange for cash and assumption of liabilities including purchase accounting adjustments on prior acquisitions

                   
   

Receivables

  $ (2,812 ) $ (558 ) $ (4,905 )
   

Inventories

    (21,241 )   (15,189 )   (42,594 )
   

Deferred income taxes, net

        163     271  
   

Property and equipment

    (5,512 )   (1,462 )   (22,255 )
   

Intangible assets

    (4,387 )       (250 )
   

Other assets

            (89 )
   

Goodwill

    (3,629 )   (2,298 )   (4,193 )
   

Accounts payable

        (149 )   3,367  
   

Floorplan notes payable

    2,737     8,765     24,608  
   

Customer deposits

    1,868     286     392  
   

Accrued expenses

    207     205     290  
   

Income taxes payable

        (51 )   1,100  
   

Long-term debt

        1,877     8,084  
               
   

Non-cash consideration: other long-term liabilities

    457     1,145     653  
   

Cash paid for dealerships, net of cash purchased and adjustments on prior acquisitions

  $ (32,312 ) $ (7,266 ) $ (35,521 )
               

See Notes to Consolidated Financial Statements

62


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES

Nature of Business

        Titan Machinery Inc. (the "Company") is engaged in the retail sale, service and rental of agricultural and construction machinery through stores in North Dakota, South Dakota, Minnesota, Iowa, Nebraska, Montana and Wyoming.

Principles of Consolidation

        The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiary, Transportation Solutions, LLC. All significant accounts, transactions and profits between the consolidated companies have been eliminated in consolidation.

Reclassifications

        Certain reclassifications of amounts previously reported have been made to the accompanying consolidated financial statements to maintain consistency and comparability between periods presented.

Concentrations of Credit Risk

        The Company's sales are to agricultural and construction equipment customers principally in North Dakota, South Dakota, Minnesota, Iowa, Nebraska, Montana and Wyoming. The Company extends credit to its customers in the ordinary course of business and monitors its customers' financial condition to minimize its risks associated with trade receivables; however, the Company does not generally require collateral on trade receivables.

        A portion of the Company's cash balances are maintained in bank deposit accounts, which are in excess of federally insured limits.

Estimates

        The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates, particularly related to realization of inventory, initial valuation and impairment analyses of intangible assets, and income taxes.

Concentrations in Operations

        The Company currently purchases new and rental equipment and related parts from a limited number of manufacturers. Although no change in suppliers is anticipated, the occurrence of such a change could cause a possible loss of sales and adversely affect operating results. The Company is the holder of authorized dealerships granted by CNH Capital LLC, New Holland North America, Inc. and Kobelco Construction Machinery America LLC whereby it has the right to act as an authorized dealer for the entities' equipment. The dealership authorizations and floorplan facilities can be cancelled by the respective entity if the Company does not observe certain established guidelines and covenants.

63


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

Cash, Cash Equivalents and U.S. Treasury Bills

        The Company considers all highly liquid investments with original maturities of three months or less on their acquisition date to be cash equivalents. As of January 31, 2011, cash equivalents consisted entirely of money market funds. As of January 31, 2010, cash equivalents consisted entirely of money market funds and U.S. Treasury Bills. The Treasury Bills are classified as held-to-maturity as the Company had both the positive intent and ability to hold to maturity, and were carried at amortized cost, which due to the short-term nature of the investments, approximated fair value.

Receivables and Credit Policy

        Trade accounts receivable due from customers are uncollateralized customer obligations due under normal trade terms requiring payment within 30 days from the invoice date. Balances unpaid after 30 days are considered past due and begin to accrue interest. Payments of trade receivables are allocated to the specific invoices identified on the customer's remittance advice or, if unspecified, are applied to the earliest unpaid invoices. Trade accounts receivable due from manufacturers relate to discount programs, incentive programs and repair services performed on equipment with a remaining factory warranty. Trade accounts receivable due from finance companies primarily consist of contracts in transit with finance companies and balances due from credit card companies. These receivables do not generally have established payment terms but are collected in relatively short time periods.

        The carrying amount of trade receivables is reduced by a valuation allowance that reflects management's best estimate of the amounts that will not be collected. Management reviews aged receivable balances and estimates the portion, if any, of the balance that will not be collected. Account balances are charged off after all appropriate means of collection have been exhausted and the potential for recovery is considered remote.

Inventories

        New and used equipment are stated at the lower of cost (specific identification) or market value with adjustments for decreases in market value on inventory rented but available for sale being a percentage of the rental income received on such inventory. All used equipment inventories and certain new equipment inventories including that which has been rented, is subject to periodic lower of cost or market evaluation. Parts inventories are valued at the lower of average cost or market value. An estimate of parts inventories not expected to be sold in the next year has been reported separately, which is based on historical sales of parts on hand. Work in process is valued at the retail rates of labor incurred and parts inventories used on service work in process at year end.

Property and Equipment

        Property and equipment is carried at cost less accumulated depreciation. Depreciation is computed on a straight-line basis over the estimated useful life of each asset, as summarized below:

Buildings and leasehold improvements   Lesser of 10 – 40 years or lease term
Machinery and equipment   3 – 10 years
Furniture and fixtures   3 – 10 years
Vehicles   5 – 10 years
Rental fleet   3 – 10 years

64


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

        Depreciation for income tax reporting purposes is computed using accelerated methods.

        The Company completes an evaluation, at each balance sheet date, whether or not events or circumstances have taken place to indicate that the remaining net book value of the assets may be unrecoverable. If necessary, the estimated future undiscounted cash flows of any assets in question are compared to their net book value to determine if an adjustment to the recorded value is necessary.

Goodwill

        Goodwill represents the excess of purchase price over the fair value of the assets of businesses acquired, including other identifiable intangible assets. Goodwill acquired in business combinations is assigned to its related reporting unit, which consists of the Company's operating segments.

        Goodwill is not amortized, but is tested for impairment at the end of the Company's fiscal year, or more frequently upon the occurrence of an event or when circumstances indicate that a reporting unit's carrying amount of goodwill is greater than its fair value. The goodwill impairment test is performed by comparing the carrying value of the reporting unit to its fair value. Fair value is calculated by discounting the estimated future cash flows of the Company's reporting units based on recently prepared operating forecasts. As of January 31, 2011, the carrying value of the Company's goodwill was not considered impaired.

Intangible Assets

        Intangible assets with a finite life consist of customer relationships and covenants not to compete, and are carried at cost less accumulated amortization. The Company amortizes the cost of identified intangible assets on a straight-line basis over the expected period of benefit, which is three years for customer relationships and the contractual term for covenants not to compete, which range from five to ten years. In accordance with the guidance for impairment of long-lived assets in Financial Accounting Standards Board ("FASB") Accounting Standards Codification ("ASC") 360-10—Property, Plant, and Equipment—Overall, the Company reviews intangible assets that have finite useful lives when an event occurs indicating the potential for earlier impairment. The Company measures impairment losses related to long-lived assets based on the amount by which the carrying amounts of these assets exceed their fair values. The Company measures fair value under ASC 360-10, which is generally based on the sum of the undiscounted future cash flows.

        Intangible assets with an indefinite life consist of distribution rights with manufacturers. The Company classifies distribution rights as indefinite lived intangible assets as our distribution agreements continue indefinitely by their terms, or are routinely awarded or renewed without substantial cost to us or material modifications to the underlying agreements. As such, the Company believes that its distribution agreements will contribute to cash flows for an indefinite period, therefore the carrying amount of distribution rights is not amortized. The Company tests distribution rights for impairment annually, or more frequently upon the occurrence of an event or when circumstances indicate that its carrying amount is greater than its fair value. The impairment test is performed by comparing the carrying value to its fair value. Fair value is calculated by discounting the estimated future cash flows of the respective store or group of stores associated with the business combination in which we obtained the distribution rights. As of January 31, 2011, the carrying value of the Company's distribution rights was not considered impaired.

65


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

Customer Deposits

        Customer deposits consist of advance payments from customers, in the form of cash or equipment to be traded-in, for revenue to be recognized in the following year.

Income Taxes

        Income taxes are provided for the tax effects of transactions reported in the financial statements and consist of taxes currently due plus deferred taxes related primarily to differences between the basis of receivables, inventory, property and equipment, intangible assets, stock-based compensation, and accrued expenses for financial and income tax reporting. The deferred tax assets and liabilities represent the future tax return consequences of those differences, which will either be taxable or deductible when the assets and liabilities are recovered or settled. The Company's policy is to recognize interest expense and penalties related to income tax matters within its provision for income taxes. The Company performs a comprehensive review of its portfolio of uncertain tax positions in accordance with the requirements and recognition standards established by ASC 740, Income Taxes. Pursuant to this guidance, an uncertain tax position represents the Company's expected treatment of a tax position taken, or expected to be taken, in a tax return, that has not been reflected in measuring income tax expense for financial reporting purposes.

Earnings Per Share

        Basic earnings per share were computed by dividing net income by the weighted-average number of shares of common stock outstanding during the year.

        Diluted earnings per share were computed by dividing net income by the weighted-average shares of common stock outstanding after adjusting for potential dilution related to the conversion of all dilutive securities into common stock. All potentially dilutive securities were included in the computation of diluted earnings per share. There were 131,000, 139,000 and 134,000 options outstanding as of January 31, 2011, 2010 and 2009, respectively, which were not included in the computation of diluted earnings per share because they were anti-dilutive.

        The following table sets forth the denominator for the computation of basic and diluted earnings per share:

 
  2011   2010   2009  
 
  (in thousands)
 

Basic weighted-average shares outstanding

    17,658     17,593     16,291  

Plus: Incremental shares from assumed conversions

                   
 

Restricted stock

    185     140     87  
 

Warrants

    53     70     109  
 

Stock options

    250     165     292  
               

Diluted weighted-average shares outstanding

    18,146     17,968     16,779  
               

66


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

Revenue Recognition

        Revenue on equipment is recognized upon receipt of a signed contract and delivery of product to customers. Revenue on parts sales is recognized upon delivery of product to customers. Rental and service revenue is recognized at the time the related services are provided. In addition to outright sales of new and used equipment, certain rental agreements may include rent-to-purchase options. Under these agreements, customers are given a period of time to exercise an option to purchase the related equipment, with a portion of the rental payments being applied to the purchase price. Any such equipment is included in inventory until the purchase option is exercised. Payments received during the rental period are recorded as customer deposits, with equipment sales revenue being recognized upon the exercise of the purchase option.

Sales Taxes

        The Company has customers in states and municipalities in which those governmental units impose a sales tax on certain sales. The Company collects those sales taxes from its customers and remits the entire amount to the various governmental units. The Company's accounting policy is to exclude the tax collected and remitted from revenue and cost of revenue.

Shipping and Handling Costs

        Shipping and handling costs are recorded as cost of revenue and amounts billed to customers for shipping and handling costs are recorded in revenue.

Manufacturer Incentives and Discounts

        The Company receives various manufacturer incentives and discounts, which are based on a variety of factors. The Company accounts for such programs in accordance with the provisions of ASC 605-50, Customer's Accounting for Certain Consideration Received from a Vendor. Discounts and incentives related to the purchase of inventory are recognized as a reduction of inventory prices and recognized as a reduction of cost of revenue when the related inventory is sold. Sales-related discounts and incentives are recognized as a reduction of cost of revenue when the related inventory is sold. Financing-related incentives are recognized as other income when earned. Other incentives, reflecting reimbursement of qualifying expenses, are recognized as a reduction of the related expense when earned.

Advertising Costs

        Costs incurred for producing and distributing advertising are expensed as incurred. Advertising expense amounted to $3.0 million, $2.6 million and $2.3 million, respectively, for the years ended January 31, 2011, 2010 and 2009.

Stock-Based Compensation

        The Company accounts for stock-based compensation in accordance with the provisions of ASC 718, Compensation—Stock Compensation. This guidance requires that stock-based compensation, which includes stock options and restricted stock, be accounted for at the fair value of the applicable equity instrument. Additional information regarding stock-based compensation is summarized in Note 12.

67


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

Business Combinations

        The Company accounts for business combinations in accordance with the provisions of ASC 805, Business Combinations. This guidance allows the acquirer to finalize the acquisition accounting during the measurement period, which may not exceed one year from the date of acquisition. During the measurement period the Company's accounting for the business combination transaction may be based on estimates due to various unknown factors present at the date of acquisition.

Segment Reporting

        The Company operates its business in two operating segments, the Agriculture segment and Construction segment, in accordance with the provisions of ASC 280, Segment Reporting. Information regarding these segments is summarized in Note 16.

Exit and Disposal Costs

        The Company accounts for exit or disposal activities, including store closures, in accordance with ASC 420, Exit or Disposal Cost Obligations. Such costs mainly include lease termination costs and employee termination costs. The Company records a liability for any remaining lease obligations, net of estimated sublease income, or estimated loss on disposal if the Company buys and subsequently sells the leased property, as of the date the Company ceases using the property. Any subsequent adjustments to that liability as a result of changes in estimates are recorded in the period incurred. The Company records a liability for employee termination costs at the date the termination benefits were communicated to the employees.

        As part of the Company's Construction business action plan, in April 2010, the Company decided to close its Construction store in Columbia Falls, Montana. The primary exit costs relate to estimated lease termination costs of $0.3 million and employee termination costs of $27,000. These exit costs are included in operating expenses on the consolidated statement of operations for the year ended January 31, 2011. The Company transferred the majority of the assets and related floorplan notes payable and long-term debt to other stores. A reconciliation of the beginning and ending liability balance follows:

 
  (in thousands)  

Balance at January 31, 2010

  $  

Exit costs incurred and charged to expense

    333  

Exit costs paid

    (126 )
       

Balance at January 31, 2011

  $ 207  
       

Recent Accounting Guidance

        In December 2010, the FASB amended authoritative guidance on business combinations, codified in ASC 805, Business Combinations. This guidance clarifies that, when presenting comparative financial statements, registrants should disclose revenue and earnings of the combined entity as though the current period business combinations had occurred as of the beginning of the comparable prior annual reporting period. The guidance also expands the supplemental pro forma disclosures to include a description of the nature and amount of material, nonrecurring pro forma adjustments directly

68


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)


attributable to the business combination included in the reported pro forma revenue and earnings. ASU 2010-29 is effective prospectively for material (either on an individual or aggregate basis) business combinations entered into in fiscal years beginning on or after December 15, 2010 with early adoption permitted. The Company adopted this guidance on February 1, 2011 and does not expect it to have a material impact on the Company's consolidated financial statements.

        In December 2010, the FASB amended authoritative guidance on goodwill impairment testing, codified in ASC 305, Intangibles—Goodwill and Other. This guidance modifies Step 1 of the goodwill impairment test for reporting units with zero or negative carrying amounts, and requires performance of Step 2 of the goodwill impairment test for such reporting units if it is more likely than not that, when considering qualitative factors, an impairment exists. The Company adopted this guidance on February 1, 2011 and does not expect it to have a material impact on the Company's consolidated financial statements.

        In July 2010, the FASB issued authoritative guidance on financing receivables and the allowance for credit losses, codified in ASC 310, Receivables. This guidance amends the current disclosure requirements to provide a greater level of disaggregated information about the credit quality of an entity's financing receivables and its allowance for credit losses. The guidance also requires an entity to disclose credit quality indicators, past due information, and modifications of its financing receivables. The Company adopted this guidance in the quarter ended January 31, 2011. Its adoption did not have a material effect on the Company's consolidated financial statements based on the nature of its receivables.

        In January 2010, the FASB updated authoritative guidance on fair value measurements, codified in ASC 820, Fair Value Measurements and Disclosures. This guidance required additional disclosure of significant transfers in and out of Level 1 and Level 2 fair value measurements and activity in Level 3 fair value measurements. It also clarified existing disclosure requirements regarding level of disaggregation and valuation inputs and techniques. The guidance is effective for interim and annual reporting periods beginning after December 15, 2009, except for the disclosure of the Level 3 activity, which is effective for interim and fiscal years beginning after December 15, 2010. The Company adopted these provisions on February 1, 2010, except for the Level 3 activity disclosures, which the Company adopted on February 1, 2011. The adoption of the guidance did not have, and the Company does not expect the adoption of the Level 3 activity disclosures to have, a material impact on the Company's consolidated financial statements.

        In October 2009, the FASB issued authoritative guidance on revenue recognition, codified in ASC 605-25, Revenue Recognition. This guidance modifies the fair value requirements of revenue recognition on multiple element arrangements by allowing the use of the "best estimate of selling price" in addition to vendor specific objective evidence and third-party evidence for determining the selling price of a deliverable. This guidance establishes a selling price hierarchy for determining the selling price of a deliverable, which is based on: (a) vendor-specific objective evidence, (b) third-party evidence, or (c) estimates. In addition, the guidance eliminates the residual method of allocation and significantly expands the disclosure requirements for such arrangements. The Company adopted this guidance on February 1, 2011. Its adoption did not have a material effect on the Company's consolidated financial statements.

69


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 1—BUSINESS ACTIVITY AND SIGNIFICANT ACCOUNTING POLICIES (Continued)

        In June 2009, the FASB issued authoritative guidance on the consolidation of variable interest entities ("VIE"), codified in ASC 810, Consolidation. This guidance eliminates the exemption for qualifying special-purpose entities, amends the approach companies use to identify the VIEs for which they are deemed to be the primary beneficiary and are required to consolidate, and requires additional disclosure of an entity's involvement with a VIE. The guidance requires companies to perform ongoing reassessments of whether it is the primary beneficiary of a VIE. This assessment no longer includes the quantitative-based assessment, and instead requires a qualitative assessment of whether a company has the power to direct the VIE's activities that most significantly impact the company's economic performance and whether the entity has the obligation to absorb losses or the right to receive benefits that could be significant to the VIE. The Company adopted this guidance on February 1, 2010. Its adoption did not have a material effect on the Company's consolidated financial statements.

        In April 2009, the FASB issued authoritative guidance on the accounting and disclosure of assets acquired and liabilities assumed in a business combination that arise from contingencies, and subsequent accounting for these contingencies. This guidance was codified in ASC 805, Business Combinations. The Company adopted this guidance on February 1, 2010. Its adoption did not have a material effect on its consolidated financial statements based on the nature of the assets acquired and liabilities assumed in the Company's business combinations.

NOTE 2—RECEIVABLES

 
  January 31, 2011   January 31, 2010  
 
  (in thousands)
 

Trade accounts receivable

             
 

Due from customers

  $ 13,295   $ 8,488  
 

Due from finance companies

    16,963     7,941  
 

Due from manufacturers

    14,422     5,847  
           
   

Total trade accounts receivable

    44,680     22,276  

Other receivables

    694     311  
           

  $ 45,374   $ 22,587  

Less allowance for doubtful accounts

    (429 )   (333 )
           

  $ 44,945   $ 22,254  
           

NOTE 3—INVENTORIES

 
  January 31,
2011
  January 31,
2010
 
 
  (in thousands)
 

New equipment

  $ 209,871   $ 174,193  

Used equipment

    162,254     127,884  

Parts and attachments

    52,694     42,611  

Work in process

    5,025     2,892  
           

  $ 429,844   $ 347,580  
           

70


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 3—INVENTORIES (Continued)

        In addition to the above amounts, the Company has estimated that a portion of its parts inventory will not be sold in the next year. Accordingly, these balances have been classified as noncurrent assets.

NOTE 4—PROPERTY AND EQUIPMENT

 
  January 31,
2011
  January 31,
2010
 
 
  (in thousands)
 

Rental fleet equipment

  $ 21,887   $ 15,231  

Machinery and equipment

    14,047     11,703  

Vehicles

    20,003     15,544  

Furniture and fixtures

    13,756     10,401  

Land, buildings, and leasehold improvements

    20,904     12,248  
           

  $ 90,597   $ 65,127  

Less accumulated depreciation

    (25,225 )   (18,523 )
           

  $ 65,372   $ 46,604  
           

        Depreciation expense amounted to $8.9 million, $7.9 million and $4.4 million, respectively, for the years ended January 31, 2011, 2010 and 2009.

NOTE 5—INTANGIBLE ASSETS AND GOODWILL

        The Company acquired intangible assets with finite lives, consisting of covenants not to compete totaling $0.5 million with a weighted-average amortization period of 6.5 years and customer relationships totaling $0.5 million with a weighted-average amortization period of three years, as part of the business combinations and an asset purchase completed during the year ended January 31, 2011. The Company also acquired intangible assets with indefinite lives, consisting of distribution rights totaling $3.6 million, as part of the business combinations completed during the year ended January 31, 2011. No intangible assets were acquired during the year ended January 31, 2010.

        Indefinite lived intangible assets consisted of distribution rights totaling $3.6 million as of January 31, 2011. The following is a summary of intangible assets with finite lives as of January 31, 2011 and 2010:

 
  Cost   Accumulated
Amortization
  Net  
 
  (in thousands)
 

Balance, January 31, 2011

                   
 

Covenants not to compete

  $ 1,075   $ (366 ) $ 709  
 

Customer relationships

    451     (12 )   439  
               

  $ 1,526   $ (378 ) $ 1,148  
               

Balance, January 31, 2010

                   
 

Covenants not to compete

  $ 575   $ (280 ) $ 295  
               

71


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 5—INTANGIBLE ASSETS AND GOODWILL (Continued)

        Amortization expense was $0.1 million, $0.1 million, and $0.2 million for the years ended January 31, 2011, 2010 and 2009, respectively. Future amortization expense, as of January 31, 2011, is expected to be as follows:

Years ending January 31,
  Amount  
 
  (in thousands)
 

2012

  $ 303  

2013

    300  

2014

    259  

2015

    121  

2016

    101  

Thereafter

    64  
       

  $ 1,148  
       

        Changes in the carrying amount of goodwill during the years ended January 31, 2011 and 2010 are summarized as follows:

 
  Agriculture   Construction   Total  
 
  (in thousands)
 

Balance, January 31, 2009

  $ 10,124   $ 2,340   $ 12,464  
 

Arising in completed business combinations

    1,464         1,464  
 

Adjustments to business combinations completed in prior year

    1,113     (279 )   834  
 

Impairment losses

             
               

Balance, January 31, 2010

    12,701     2,061     14,762  
 

Arising in completed business combinations

    2,245         2,245  
 

Adjustments to business combinations completed in prior year

    1,384         1,384  
 

Impairment losses

             
               

Balance, January 31, 2011

  $ 16,330   $ 2,061   $ 18,391  
               

NOTE 6—LINES OF CREDIT/FLOORPLAN NOTES PAYABLE

Senior Secured Credit Facility—Operating and Floorplan Lines of Credit

        On October 31, 2010, the Company entered into a Senior Secured Credit Facility (the "Credit Agreement") with a group of banks led by Wells Fargo Bank, National Association (the "Wells Fargo Bank Syndicate"). The Credit Agreement provides for a $175.0 million wholesale floorplan line of credit (the "Floorplan Line") and a $50.0 million working capital line of credit (the "Working Capital Line"), both of which expire October 31, 2014. The Credit Agreement has a variable interest rate on outstanding balances of LIBOR plus an applicable margin of 1.5% to 2.0% per annum, depending upon the Company's consolidated leverage ratio, has a 0.2% to 0.4% non-usage fee on the average monthly unused amount and requires monthly payments of accrued interest. The Credit Agreement is secured by all assets of the Company and contains certain financial covenants that impose a minimum level of fixed charge coverage ratio and a maximum level of debt to tangible net worth ratio and

72


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 6—LINES OF CREDIT/FLOORPLAN NOTES PAYABLE (Continued)


include annual thresholds for acquisitions and capital expenditures. The Credit Agreement also restricts our ability to pay cash dividends to an amount not to exceed 50% of consolidated net income for the then trailing four quarters, so long as no default of event of default exists prior to or immediately following such action or otherwise results from such action. As of January 31, 2011, the Company was in compliance with all financial covenants. The Credit Agreement became effective on November 2, 2010.

        The Floorplan Line is used to finance equipment inventory purchases. Amounts outstanding are recorded as floorplan notes payable, within current liabilities on the consolidated balance sheets as the Company intends to repay amounts borrowed within one year.

        The Working Capital Line is used to finance working capital requirements of the Company and replaced the Company's previous $25.0 million operating line and Term Loan (as defined below) with Bremer Bank National Association ("Bremer Bank") and certain notes payable to CNH Capital America LLC ("CNH Capital") for rental fleet equipment. Amounts outstanding are recorded as long-term debt, within long-term liabilities on the consolidated balance sheets, as the Company does not have the intention or obligation to repay amounts borrowed within one year.

Operating Line of Credit

        Prior to November 2010, the Company was party to a Loan Agreement (the "Loan Agreement") with Bremer Bank dated July 15, 2009, as amended on July 13, 2010, which provided for a $25.0 million revolving operating line of credit (the "Revolving Loan") and a $12.9 million term loan (the "Term Loan"). The Loan Agreement was terminated in November 2010 and replaced with the aforementioned Working Capital Line. The Revolving Loan was used to fund short term working capital requirements of the Company. The Revolving Loan had a variable interest rate of 0.25% per annum below a Bremer Bank reference rate (subject to a minimum interest rate floor of 4.5%) on outstanding balances, had a 0.5% non-usage fee on the average monthly unused amount, required monthly payments of accrued interest, and had a maturity date of July 12, 2011. The Term Loan had an interest rate of 5.9%, required monthly payments of principal and interest, and had a maturity date of July 2014. Advances under the Loan Agreement were secured by substantially all of the Company's assets.

Floorplan Lines of Credit

        As of January 31, 2011, the Company had discretionary floorplan lines of credit for equipment purchases totaling approximately $550.0 million with various lending institutions, including the aforementioned $175.0 million Floorplan Line, a $300.0 million Wholesale Floorplan Credit Facility with CNH Capital and $75.0 million Wholesale Financing Plan with Rental Agreement with Agricredit Acceptance LLC ("Agricredit"). Floorplan notes payable relating to these credit facilities totaled approximately $300.6 million of the total floorplan notes payable balance of $320.8 million outstanding as of January 31, 2011 and $245.3 million of the total floorplan notes payable balance of $249.9 million outstanding as of January 31, 2010. As of January 31, 2011, the Company had approximately $242.4 million in available borrowings remaining under these lines of credit. These floorplan notes carried various interest rates primarily ranging from 2.26 to 7.25% as of January 31, 2011, subject to interest-free periods offered by CNH Capital. As of January 31, 2011, the Company was in compliance with all floorplan financial covenants.

73


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 6—LINES OF CREDIT/FLOORPLAN NOTES PAYABLE (Continued)

        The available borrowings under the CNH Capital credit facility are reduced by outstanding floorplan notes payable, rental fleet financing and other acquisition-related financing arrangements with CNH Capital. During fiscal 2010, interest rates for new borrowings under the CNH Capital floorplan line of credit ranged from the prime rate plus 0.3% to the prime rate plus 6% per annum, subject to any interest-free periods offered by CNH Capital. Since February 2010, interest rates have been equal to the prime rate plus 4% on new borrowings, subject to any interest-free periods offered by CNH Capital. The CNH Capital credit facility automatically renews on August 31 of each year through August 31, 2012, unless earlier terminated by either party. Under covenants of the CNH Capital credit facility, the Company has agreed, among other things, to maintain various financial ratio levels and to submit certain financial information. It also contains various restrictive covenants that require prior consent of CNH Capital if the Company desires to engage in any acquisition of, consolidation or merger with any other business entity in which the Company is not the surviving company; create subsidiaries; move any collateral outside of the U.S.; or sell, rent, lease or otherwise dispose or transfer any of the collateral, other than in the ordinary course of business. CNH Capital's consent is also required for the acquisition of any CNH dealership. In addition, the CNH Capital credit facility restricts the Company's ability to incur any liens upon any substantial part of its assets. The balances outstanding with CNH Capital are secured by the related inventory. Repayment terms vary by individual notes, but generally payments are made from sales proceeds or rental revenue from the related inventories.

        The Company entered into the Wholesale Financing Plan with Rental Agreement with Agricredit on July 10, 2010, which was amended October 5, 2010 to increase the maximum credit facility from $25.0 million to $75.0 million and require additional covenants. The Agricredit credit facility may be used to purchase or refinance new and used equipment inventory. The interest rate on borrowings under the Agricredit credit facility is equal to the three-month LIBOR rate plus 5.25%. The Agricredit credit facility allows for increase, decrease or termination of the credit facility by Agricredit on 90 days notice. Under covenants of the Agricredit credit facility, the Company had agreed, among other things, to maintain various financial ratio levels, to submit certain financial information, and to obtain prior consent from Agricredit if the Company desired to engage in any acquisition meeting certain financial thresholds. The balances outstanding with Agricredit are secured by the related inventory. Repayment terms vary by individual notes, but generally payments are made from sales proceeds or rental revenue from the related inventories.

        The Company had a $75.0 million credit facility with GE Commercial Distribution Finance Corporation ("GE"). The GE credit facility was terminated in November 2010 and was replaced with the aforementioned Floorplan Line. The GE credit facility had been used to purchase new and used inventory from vendors approved by GE, or to finance or refinance new or used inventory. The interest rate on borrowings under the GE floorplan line of credit was equal to the three-month LIBOR rate plus 4.95%. The GE credit facility allowed for termination by either party on 60 days notice. Under covenants of the GE credit facility, the Company had agreed, among other things, to maintain various financial ratio levels and to submit certain financial information. It also contained various restrictive covenants regarding related party transactions outside of the ordinary course of business and required GE's prior consent if the Company desired to engage in any acquisition meeting certain financial thresholds; made any investments outside of the ordinary course of business; or had a change in control, as defined by the GE credit facility.

74


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 7—LONG-TERM DEBT

        The following is a summary of long-term debt as of January 31, 2011 and 2010:

 
  January 31,
2011
  January 31,
2010
 
 
  (in thousands)
 

Working Capital Line payable to the Wells Fargo Bank Syndicate (see details in Note 6)

  $ 26,407   $  

Variable rate notes payable to CNH Capital and other finance companies, variable rates primarily at prime plus 4%, varying monthly installment payments maturing April 2015, secured by rental fleet equipment

    1,122     9,591  

Fixed rate notes payable to finance companies, interest rates primarily ranging from 3.49% to 10.20%, due in monthly installments including interest and various maturity dates through May 2016, secured by vehicles

    3,714     2,870  

Fixed rate notes to various finance companies and other parties, interest rates ranging from 3.65% to 7.09%, due in monthly installments including interest and various maturity dates through January 2018, secured by fixed assets

    5,628     1,374  

Note payable to AgCountry, due February 2011, variable interest at the LIBOR rate plus 4.0%, unsecured

    388     780  

Other, variable interest rates at 6.5% to 7.25%, various maturity dates through January 2015

    357     792  

Note payable to Bremer Bank, 5.9%, due in monthly installments of $289,300, original maturity July 2014, secured by all assets of the Company

        13,663  
           

    37,616     29,070  

Less current maturities

    (4,207 )   (7,218 )
           

  $ 33,409   $ 21,852  
           

75


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 7—LONG-TERM DEBT (Continued)

        Long-term debt maturities are as follows:

12 Months Ending January 31,
  Amount  
 
  (in thousands)
 

2012

  $ 4,207  

2013

    2,341  

2014

    2,359  

2015

    27,187  

2016

    1,155  

Thereafter

    367  
       

  $ 37,616  
       

NOTE 8—ACCRUED EXPENSES

 
  January 31,
2011
  January 31,
2010
 
 
  (in thousands)
 

Interest

  $ 143   $ 661  

Compensation

    10,167     6,983  

Sales and payroll taxes

    1,958     938  

Health insurance claims liability

    653     527  

Deferred revenue

    2,785      

Other

    1,110     761  
           

  $ 16,816   $ 9,870  
           

NOTE 9—OPERATING LEASES AND RELATED PARTY TRANSACTIONS

        As of January 31, 2011 the Company leases buildings pursuant to 41 different operating lease agreements with monthly minimum lease payments of $0.5 million at January 31, 2011 from Dealer Sites, LLC ("Dealer Sites"), an entity in which a minority position is owned by David Meyer, the Company's Chairman and Chief Executive Officer, Tony Christianson, one of the Company's directors, Peter Christianson, the Company's President and Chief Operating Officer, and other Meyer and Christianson family members. Rent expense for leases with Dealer Sites totaled $5.2 million, $3.9 million and $2.3 million for the years ended January 31, 2011, 2010 and 2009, respectively. The leases expire on various dates between May 2012 and April 2022 and provide that the lessee pay all property taxes, utilities, insurance and all expenses necessary for the general upkeep of the respective buildings.

76


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 9—OPERATING LEASES AND RELATED PARTY TRANSACTIONS (Continued)

        Rent expense for building leases with related parties other than Dealer Sites totaled $0.2 million, $0.1 million, and $0.4 million for the years ended January 31, 2011, 2010 and 2009, respectively. During fiscal year 2011, the Company leased two buildings pursuant to operating leases from C.I. Farm Power, Inc., a company affiliated with Peter Christianson, and Arthur Mercantile Company, a company for which James L. Williams, one of the Company's directors, is the President and Treasurer. The lease with C.I. Farm Power, Inc. expires in July 2013 and the lease with Arthur Mercantile Company will expire in May 2019. During fiscal year 2009 the Company leased various buildings on operating leases from Meyer Family Limited Partnership, Padre Partnership, and Landco LLC, companies also affiliated with David Meyer and Peter Christianson.

        The Company also leases 47 additional buildings under operating lease agreements with unrelated parties and leases office equipment under various operating lease agreements. The leases expire at various dates through July 2022. Rent and lease expense under all operating leases totaled $9.8 million, $7.8 million and $4.9 million during the years ended January 31, 2011, 2010 and 2009, respectively. Certain leases have fluctuating minimum lease payments. The Company recognizes lease expense on a straight-line basis over the expected term of the lease.

        Approximate minimum future lease payments are as follows:

Years ending January 31,
  Amount  
 
  (in thousands)
 

2012

  $ 11,305  

2013

    10,455  

2014

    9,677  

2015

    9,469  

2016

    8,833  

Thereafter

    30,429  
       

  $ 80,168  
       

77


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 10—INCOME TAXES

        Net deferred tax assets and liabilities consist of the following components as of January 31, 2011 and 2010:

 
  2011   2010  
 
  (in thousands)
 

Current deferred tax assets:

             
 

Inventory allowances

  $ 1,811   $ 1,140  
 

Stock-based compensation

    380     357  
 

Receivables

    172     133  
 

Other

    884     636  
           

  $ 3,247   $ 2,266  
           

Non-current deferred tax assets (liabilities):

             
 

Property and equipment

  $ (8,348 ) $ (6,156 )
 

Intangibles

    (641 )   (355 )
 

Other, net

    (23 )   155  
           

  $ (9,012 ) $ (6,356 )
           

        The provision for income taxes charged to income for the years ended January 31, 2011, 2010 and 2009 consists of the following:

 
  2011   2010   2009  
 
  (in thousands)
 

Currently payable

                   
 

Federal

  $ 10,676   $ 7,652   $ 9,202  
 

State

    2,544     1,753     2,260  

Deferred

    1,675     1,850     968  
               

  $ 14,895   $ 11,255   $ 12,430  
               

        The reconciliation of the statutory federal income tax rate to the Company's effective rate is as follows:

 
  2011   2010   2009  

U.S. Statutory Rate

    35.0 %   35.0 %   35.0 %

State taxes on income net of federal tax benefit

    5.1 %   5.1 %   5.2 %

All other, net

    (0.1 )%   1.6 %   0.5 %
               

    40.0 %   41.7 %   40.7 %
               

Uncertain Tax Positions

        The Company identified an uncertain tax position and recorded an unrecognized tax benefit during the year ending January 31, 2008. This unrecognized tax benefit was included in other long-term liabilities on the Company's consolidated balance sheet. In August 2009, the Internal Revenue Service ("IRS") completed its audit of the Company, including the uncertain tax position taken during fiscal 2008. All amounts owed to state and federal taxing authorities were paid during the year ended January 31, 2010. There were not any additional unrecognized tax benefits identified during the year

78


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 10—INCOME TAXES (Continued)


ended January 31, 2011. A reconciliation of the beginning and ending amount of unrecognized tax benefits for the years ended January 31, 2010 and 2009 is shown in the table below. There was no activity related to unrecognized tax benefits for the year ended January 31, 2011.

 
  January 31,
2010
  January 31,
2009
 
 
  (in thousands)
 

Balance, beginning of year

  $ 446   $ 420  

Additions for tax positions related to current year

         

Additions/reductions for tax positions taken in prior years

             
 

Accrued interest expense

    9     26  
 

Reduction due to final IRS settlement

    (14 )    

Reductions for tax positions as a result of:

             
 

Settlements

    (441 )    
 

Lapse of statute of limitations

         
           

Balance, end of year

  $   $ 446  
           

        The Company files income tax returns in the U.S. federal jurisdiction and various states and is no longer subject to income tax examinations by U.S. federal tax authorities for fiscal years ended on or prior to January 31, 2008 and state tax authorities for fiscal years ended on or prior to January 31, 2006.

NOTE 11—CAPITAL STRUCTURE

        The Company's certificate of incorporation provides the Company with the authority to issue 30,000,000 shares of $0.00001 par value stock, consisting of 25,000,000 shares of common stock and 5,000,000 shares classified as undesignated.

NOTE 12—STOCK-BASED COMPENSATION AND STOCK WARRANTS

Stock Warrants

        The following table summarizes stock warrant activity for the year ended January 31, 2011:

 
  Number of
Warrants
  Weighted
Average
Exercise
Price
  Aggregate
Intrinsic
Value
  Weighted
Average
Remaining
Contractual
Life (Years)
 
 
  (in thousands)
   
  (in thousands)
   
 

Outstanding and exercisable at January 31, 2010

    83   $ 3.43   $ 629     3.1  
 

Granted

                     
 

Exercised

    (43 )   3.36              
 

Forfeited

                     
                         

Outstanding and exercisable at January 31, 2011

    40   $ 3.50   $ 832     2.4  
                         

        The aggregate intrinsic value of stock warrants exercised was $0.6 million, $0.3 million and $0.1 million for the years ended January 31, 2011, 2010 and 2009, respectively.

79


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 12—STOCK-BASED COMPENSATION AND STOCK WARRANTS (Continued)

        Stock warrants were valued using the Black-Scholes option pricing model. Assumptions used to value the warrants were similar to those used in valuing the stock options as described below. Warrants issued in conjunction with a debt offering were valued and classified as Additional Paid-In Capital in accordance with applicable authoritative guidance in effect at the time of the transaction.

Stock Award Plans

        The Company implemented the 2005 Equity Incentive Plan, a stock-based compensation plan (the "Plan"), during the year ended January 31, 2006. In August 2007, the Plan was amended to increase the number of shares available under the Plan from 500,000 to 1,000,000 shares. The purpose of the Plan is to provide incentive compensation to participants for services that have been or will be performed for continuing as employees or members of the Board of Directors of the Company. Under the Plan, the Company may grant incentive stock options, non-qualified stock options and restricted stock for up to 1,000,000 shares of common stock under all forms of awards. The Company accounts for stock options and restricted stock using the fair value method under ASC 718, Compensation—Stock Compensation. Shares issued for stock-based awards consist of authorized but unissued shares. The Company has approximately 92,000 shares authorized and available for future equity awards under the Plan as of January 31, 2011.

        Compensation cost charged to operations under the Plan was $1.2 million, $1.0 million and $0.7 million for the years ended January 31, 2011, 2010 and 2009, respectively. The related income tax benefit (net) was $0.3 million, $0.2 million, and $0.2 million for the years ended January 31, 2011, 2010 and 2009, respectively.

Stock Options

        The Company grants stock options as part of its long-term incentive compensation to employees and members of the Board of Directors of the Company. Stock options vest over a period of four to six years for employees and immediately for members of the Board of Directors, and have contractual terms of five to ten years.

        The following table summarizes stock option activity for the year ended January 31, 2011:

 
  Number of
Options
  Weighted
Average
Exercise
Price
  Aggregate
Intrinsic
Value
  Weighted
Average
Remaining
Contractual
Life (Years)
 
 
  (in thousands)
   
  (in thousands)
   
 

Outstanding at January 31, 2010

    631   $ 10.90              
 

Granted

                     
 

Exercised

    (27 )   6.49              
 

Forfeited

    (2 )   22.21              
                         

Outstanding at January 31, 2011

    602   $ 11.05   $ 7,958     6.0  
                         

Exercisable at January 31, 2011

    334   $ 9.63   $ 4,878     5.6  

        The aggregate intrinsic value of stock options exercised was $0.2 million, $0.1 million and $0.2 million for the years ended January 31, 2011, 2010 and 2009, respectively. The weighted-average

80


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 12—STOCK-BASED COMPENSATION AND STOCK WARRANTS (Continued)


grant date fair value of stock options granted was $11.16 and $8.41 for the years ended January 31, 2010, and 2009, respectively. There were no stock options granted for the year ended January 31, 2011. The Company recognizes the fair value of stock options as compensation expense ratably over the vesting period of the award. The fair value of each stock option granted is estimated using the Black-Scholes option pricing model. The following assumptions were made in estimating fair value for stock options granted during the following fiscal years:

Assumption
  2010   2009  

Dividend yield

    0%     0%  

Risk-free interest rate

    3.1%     2.1 – 3.6%  

Expected life of options

    6.75 years     6.75 – 8 years  

Expected volatility

    39%     34 – 42%  

        The following is a summary of information related to options outstanding and exercisable at January 31, 2011:

 
   
  Options Outstanding   Options Exercisable    
 
  Range of
Exercise
Prices
  Number   Weighted
Average
Remaining
Contractual
Life (Years)
  Weighted
Average
Exercise
Price
  Number   Weighted
Average
Remaining
Contractual
Life (Years)
  Weighted
Average
Exercise
Price
   
 
   
  (in thousands)
   
   
  (in thousands)
   
   
   
      $  4.00 –   4.50     105     5.4   $ 4.46     73     5.4   $ 4.44    
        7.50 – 10.20     333     5.4     8.64     207     5.1     8.70    
      11.15 – 14.69     33     7.8     11.85     10     7.8     11.88    
      21.21 – 26.84     131     7.4     22.24     44     7.4     22.24    
                                           
            602     6.0     11.05     334     5.6     9.63    
                                           

        As of January 31, 2011 there was $1.2 million of unrecognized compensation cost on non-vested stock options that is expected to be recognized over a weighted-average period of 2.6 years.

Restricted Stock

        The Company grants restricted stock awards in addition to stock options as part of its long-term incentive compensation to employees and members of the Board of Directors of the Company. The fair value of the restricted stock is determined based on the closing market price of the Company's stock on the date of grant. The restricted stock primarily vests over a period of three to six years for employees and over one year for members of the Board of Directors. The Company recognizes compensation expense ratably over the vesting period of the restricted stock.

81


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 12—STOCK-BASED COMPENSATION AND STOCK WARRANTS (Continued)

        The following table summarizes restricted stock activity for the year ended January 31, 2011:

 
  Shares   Weighted
Average
Grant
Date
Fair Value
  Weighted
Average
Remaining
Contractual
Term
 
 
  (number of shares
in thousands)

   
   
 

Nonvested at January 31, 2010

    163   $ 11.45     2.5  
 

Granted

    86     14.94        
 

Forfeited

    (10 )   11.36        
 

Vested

    (70 )   9.40        
                   

Nonvested at January 31, 2011

    169   $ 14.06     2.8  
                   

        The weighted-average grant date fair value of restricted stock granted was $14.94, $12.89 and $17.45 during the years ended January 31, 2011, 2010 and 2009, respectively. The total fair value of restricted stock vested was $1.2 million, $0.1 million, and $0.1 million during the years ended January 31, 2011, 2010 and 2009, respectively. As of January 31, 2011, there was $1.6 million of unrecognized compensation cost on non-vested restricted stock that is expected to be recognized over a weighted-average period of 2.8 years.

NOTE 13—EMPLOYEE BENEFIT PLANS

        The Company has a 401(k) profit-sharing plan for full-time employees at least 19 years of age. The Company makes matching contributions of 50% of qualifying employee elective contributions to the plan. The Company's matching contributions to the plan of $2.4 million, $1.5 million and $1.2 million were charged to expense for the years ended January 31, 2011, 2010 and 2009, respectively. In addition, the Company may make a discretionary contribution to the plan as determined by the Board of Directors, with a maximum amount equal to the amount allowed under the IRS regulations. The Company did not make any discretionary contributions to the plan for the years ended January 31, 2011, 2010 and 2009.

NOTE 14—BUSINESS COMBINATIONS

        The Company continued to implement its strategy of consolidating dealerships in desired market areas. Below is a summary of the acquisitions completed for the years ended January 31, 2011, 2010 and 2009. In certain of the business combination transactions the Company recognized goodwill. Factors contributing to the recognition of goodwill include an evaluation of enterprise value, historical financial performance, estimated industry potential within the market and the market territory relationship to other existing and future planned Company locations. Pro forma results are not presented as the acquisitions are not considered material, individually or in aggregate, to the Company. The results of operations have been included in the Company's consolidated results of operations since the date of each respective business combination.

82


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 14—BUSINESS COMBINATIONS (Continued)

Fiscal 2011

        On June 1, 2010, the Company acquired certain assets of Hubbard Implement, Inc. The acquired entity consisted of one agricultural equipment store located in Iowa Falls, Iowa which is contiguous to the Company's existing locations in Grundy Center and Waverly, Iowa. The acquisition-date fair value of the total consideration transferred for the dealership was $1.5 million.

        On December 31, 2010, the Company acquired certain assets of Fairbanks International, Inc. ("Fairbanks"), Fairbanks's wholly-owned subsidiary, Fairbanks Leasing, Inc., and an affiliated entity of Fairbanks, GuideNet Systems, LLC. The acquisition consists of six agricultural equipment stores in Grand Island, Kearney, Lexington, Holdrege, Hastings, and North Platte, Nebraska and expands the Company's agricultural presence in the Midwest. The acquisition-date fair value of the total consideration transferred for the dealerships was $29.7 million.

        During the year ended January 31, 2011, adjustments were recorded for additional consideration of $1.4 million earned and paid under agreements disclosed in the Company's Form 10-K for the fiscal year ended January 31, 2010 as filed with the SEC. This additional consideration resulted in a net increase in goodwill of $1.4 million.

Fiscal 2010

Winger Implement, Inc.

        On May 1, 2009, the Company acquired 100% of the outstanding stock of Winger Implement, Inc. and subsequently merged the acquired entity into the Company. The acquired entity consisted of one agricultural equipment store located in Winger, Minnesota and expands the Company's presence in the Red River Valley. The acquisition-date fair value of the total consideration transferred for the dealership was $1.5 million.

Arthur Mercantile Company

        On May 28, 2009, the Company acquired certain assets of Arthur Mercantile Company. The acquired entity consisted of one agricultural equipment store located in Arthur, North Dakota and expands the Company's presence in the Red River Valley. The acquisition-date fair value of the total consideration transferred for the dealership was $0.8 million. James L. Williams, Arthur Mercantile Company's President and Treasurer, is a Titan Machinery director.

Valley Equipment, Inc.

        On June 30, 2009, the Company acquired certain assets of Valley Equipment, Inc. in Mayville, North Dakota. The acquired entity consisted of one agricultural equipment store and expands the Company's presence in the Red River Valley. The acquisition-date fair value of the total consideration transferred for the dealership was $0.8 million. James L. Williams, Valley Equipment, Inc.'s President, is a Titan Machinery director.

Lickness Bros. Implement Co.

        On August 14, 2009, the Company acquired certain assets of Lickness Bros. Implement Co. The acquired entity consisted of one agricultural equipment store located in Britton, South Dakota and is

83


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 14—BUSINESS COMBINATIONS (Continued)


contiguous to existing markets in Northeast South Dakota and Southeast North Dakota. The acquisition-date fair value of the total consideration transferred for the dealership was $0.2 million.

Oskaloosa Implement Co.

        On November 2, 2009, the Company acquired certain assets of Oskaloosa Implement Co. The acquired entity consisted of two agricultural equipment stores located in Pella and Oskaloosa, Iowa and expands the Company's presence in Iowa. The acquisition-date fair value of the total consideration transferred for the dealerships was $2.6 million.

Valley Farm Equipment, Inc.

        On November 2, 2009, the Company acquired 100% of the outstanding stock of Valley Farm Equipment, Inc. and subsequently merged the acquired entity into the Company. The acquired entity consisted of one agricultural equipment store located in Milbank, South Dakota and is strategically located in the Whetstone Valley in Eastern South Dakota, between Titan Machinery's existing dealerships in Graceville, Minnesota, Watertown, South Dakota, and Aberdeen, South Dakota. The acquisition-date fair value of the total consideration transferred for the dealership was $1.9 million.

        During the year ended January 31, 2010 adjustments were recorded to finalize the purchase price allocations of prior acquisitions and for additional consideration of $1.1 million earned and paid under agreements disclosed below. These adjustments and additional consideration resulted in a net increase in goodwill of $0.8 million.

Fiscal 2009

Western Plains Machinery Co. and WP Rentals LLC

        On December 31, 2008, the Company acquired certain assets of WP Rentals LLC and 100% of the outstanding stock of Western Plains Machinery Co., and subsequently merged the acquired entity into the Company. WP Rentals LLC consisted of three construction equipment rental stores located in Billings and Belgrade, Montana and Cheyenne, Wyoming. Western Plains Machinery Co. consisted of six construction equipment stores in Billings, Great Falls, Missoula, and Columbia Falls, Montana and Casper and Gillette, Wyoming. These nine locations expand the number of Titan Machinery locations that offer construction equipment and are contiguous to existing markets in western South Dakota and North Dakota. The total consideration for the dealerships included cash payments of $7.7 million.

Anderson Power and Equipment, Inc.

        On December 22, 2008, the Company acquired 100% of the outstanding stock of Anderson Power and Equipment, Inc. and subsequently merged the acquired entity into the Company. The acquired entity consisted of an agricultural equipment store located in Thief River Falls, Minnesota and is contiguous to existing markets in Western Minnesota and Eastern North Dakota. The total cash purchase price for the dealership was $2.2 million.

Pioneer Garage, Inc.

        On October 1, 2008, the Company acquired certain assets of Pioneer Garage, Inc. The acquired entity consisted of three agricultural equipment stores located in Pierre, Highmore, and Miller,

84


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 14—BUSINESS COMBINATIONS (Continued)


South Dakota. These stores are contiguous to existing markets in South Dakota. The total cash purchase price for the dealerships was $5.5 million.

Wolf's Farm Equipment, Inc.

        On September 12, 2008, the Company acquired certain assets of Wolf's Farm Equipment, Inc. The dealership is located in Kintyre, North Dakota and is contiguous to existing markets. The total cash purchase price for the dealership was $0.6 million.

Mid-Land Equipment Company, L.C.

        On May 28, 2008, the Company acquired certain assets of Mid-Land Equipment Company, L.C. The acquired entity consisted of six construction equipment stores located in Des Moines, Davenport, Clear Lake and Cedar Rapids, Iowa, and Omaha and Lincoln, Nebraska. These stores are contiguous to existing markets in South Dakota and overlay the existing agricultural locations in Iowa. The total cash purchase price for the dealerships was $14.4 million.

Quad County Implement, Inc.

        On May 1, 2008, the Company acquired 100% of the outstanding stock of Quad County Implement, Inc. and subsequently merged the acquired entity into the Company. The dealership is located in Blairstown, Iowa and is contiguous to existing markets. The acquisition increases the Company's market share in central Iowa. The total cash purchase price for the dealership was $2.0 million.

Ceres Equipment, Inc.

        On February 1, 2008, the Company acquired certain assets of Ceres Equipment, Inc. The dealership is located in Roseau, Minnesota and is contiguous to existing markets. The acquisition increases the Company's market share in the northwest area of Minnesota. The total cash purchase price for the dealership was $3.9 million.

85


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 14—BUSINESS COMBINATIONS (Continued)

        The allocations of the purchase prices in the above business combinations are presented in the following table:

 
  January 31,
2011
  January 31,
2010
  January 31,
2009
 
 
  (in thousands)
 

Cash

  $ 4   $ 315   $ 54  

Receivables

    2,812     558     4,905  

Inventories

    21,241     15,189     42,594  

Deferred income taxes

        93     63  

Property and equipment

    5,512     1,462     22,255  

Intangible assets

    4,387         250  

Other assets

            89  

Goodwill

    3,629     2,298     4,193  
               

  $ 37,585   $ 19,915   $ 74,403  
               

Accounts payable

  $   $ (149 ) $ 3,367  

Floorplan notes payable

    2,737     8,765     24,608  

Customer deposits

    1,868     286     392  

Accrued expenses

    207     205     290  

Income taxes payable

        (51 )   1,100  

Long-term debt

        1,877     8,084  

Deferred income taxes

        256     334  
               

  $ 4,812   $ 11,189   $ 38,175  
               

Cash consideration

    32,316     7,581     35,575  

Non-cash consideration: other long-term liabilities

    457     1,145     653  
               

Total consideration

  $ 32,773   $ 8,726   $ 36,228  
               

Goodwill related to the Agriculture operating segment

  $ 3,629   $ 2,577   $ 1,853  

Goodwill related to the Construction operating segment

  $   $ (279 ) $ 2,340  

Goodwill expected to be deductible for tax purposes

  $ 3,629   $ 2,011   $ 3,730  

NOTE 15—FAIR VALUE OF FINANCIAL INSTRUMENTS

        The fair value of a financial instrument is generally defined as the amount at which the instrument could be exchanged in a current transaction between willing parties, other than in a forced liquidation sale. Quoted market prices are generally not available for the Company's financial instruments. Accordingly, fair values are based on judgments regarding anticipated cash flows, future expected loss experience, current economic conditions, risk characteristics of various financial instruments and other factors. These estimates involve uncertainties and matters of judgment, and therefore cannot be determined with precision. Changes in assumptions could significantly affect the estimates. As explained in Note 1, actual results could differ from the estimates.

86


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 15—FAIR VALUE OF FINANCIAL INSTRUMENTS (Continued)

        The carrying amount of cash, receivables, payables, short-term debt and other current liabilities approximates fair value because of the short maturity and/or frequent repricing of those instruments. Based upon current borrowing rates with similar maturities, the carrying value of the long-term debt approximates the fair value as of January 31, 2011 and 2010.

NOTE 16—SEGMENT INFORMATION AND OPERATING RESULTS

        The Company owns and operates a network of full service agricultural and construction equipment stores in the United States. The Company's two reportable segments, Agriculture and Construction, each offer different products and the operating results for each segment are reported separately to the Company's senior management to make decisions regarding the allocation of resources, to assess the Company's operating performance and to make strategic decisions.

        The Company's Agriculture segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from large-scale farming to home and garden use. This segment also includes ancillary sales and services related to agricultural activities and products such as equipment transportation, Global Positioning System ("GPS") signal subscriptions, hardware merchandise and finance and insurance products.

        The Company's Construction segment sells, services, and rents machinery, and related parts and attachments, for uses ranging from heavy construction to light industrial machinery use. This segment also includes ancillary sales and services related to construction activities such as equipment transportation, GPS signal subscriptions and finance and insurance products.

        Revenues, income before income tax and total assets at the segment level are reported before eliminations. The Company retains various unallocated income/(expense) items and assets at the general corporate level, which the Company refers to as "Shared Resources" in the table below. Shared Resource assets primarily consist of cash and property and equipment. Intersegment revenues are immaterial. For information regarding goodwill by segment, see Note 5.

87


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 16—SEGMENT INFORMATION AND OPERATING RESULTS (Continued)

        Certain financial information for each of the Company's business segments is set forth below.

 
  January 31, 2011   January 31, 2010   January 31, 2009  
 
  (in thousands)
 

Revenues

                   

Agriculture

  $ 979,016   $ 751,258   $ 624,035  

Construction

    152,646     116,361     88,032  
               

Segment revenues

    1,131,662     867,619     712,067  

Eliminations

    (37,173 )   (28,838 )   (21,630 )
               

Total

  $ 1,094,489   $ 838,781   $ 690,437  
               

Income (Loss) Before Income Taxes

                   

Agriculture

  $ 44,083   $ 36,133   $ 32,023  

Construction

    (3,451 )   (6,837 )   604  
               

Segment income (loss) before income taxes

    40,632     29,296     32,627  

Shared Resources

    (3,133 )   (2,120 )   (1,678 )

Eliminations

    (262 )   (184 )   (444 )
               

Income before income taxes

  $ 37,237   $ 26,992   $ 30,505  
               

Interest Income

                   

Agriculture

  $ 111   $ 94   $ 49  

Construction

    129     74     11  
               

Segment interest income

    240     168     60  

Shared Resources

    119     169     1,038  
               

Total

  $ 359   $ 337   $ 1,098  
               

Interest Expense

                   

Agriculture

  $ 8,140   $ 4,471   $ 5,018  

Construction

    3,188     2,488     1,669  
               

Segment interest expense

    11,328     6,959     6,687  

Shared Resources

    (2,744 )   (11 )   (2,718 )
               

Total

  $ 8,584   $ 6,948   $ 3,969  
               

Depreciation and Amortization

                   

Agriculture

  $ 4,034   $ 3,416   $ 2,494  

Construction

    3,855     3,793     1,510  
               

Segment depreciation and amortization

    7,889     7,209     4,004  

Shared Resources

    1,080     741     579  
               

Total

  $ 8,969   $ 7,950   $ 4,583  
               

Capital Expenditures

                   

Agriculture

  $ 3,395   $ 6,567   $ 4,659  

Construction

    4,221     2,917     770  
               

Segment capital expenditures

    7,616     9,484     5,429  

Shared Resources

    9,116     2,910     1,799  
               

Total

  $ 16,732   $ 12,394   $ 7,228  
               

Total Assets

                   

Agriculture

  $ 514,049   $ 350,086   $ 252,599  

Construction

    98,535     87,910     87,317  
               

Segment assets

    612,584     437,996     339,916  

Shared Resources

    37,340     77,631     70,963  

Eliminations

    (1,078 )   (815 )   (631 )
               

Total

  $ 648,846   $ 514,812   $ 410,248  
               

88


Table of Contents


TITAN MACHINERY INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

NOTE 17—SELECTED QUARTERLY FINANCIAL DATA (Unaudited)

        The following reflects selected quarterly financial information for fiscal years 2011 and 2010.

 
  Revenue   Gross
Profit
  Net
Income
  Earnings per
Share-Basic
  Earnings per
Share-Diluted
 
 
  (in thousands, except per share data)
 

2011

                               

First quarter

  $ 205,457   $ 34,443   $ 1,559   $ 0.09   $ 0.09  

Second quarter

    209,666     36,048     2,714     0.15     0.15  

Third quarter

    311,307     47,978     7,706     0.44     0.42  

Fourth quarter

    368,059     56,099     10,363     0.58     0.57  

2010

                               

First quarter

  $ 166,301   $ 28,516   $ 1,790   $ 0.10   $ 0.10  

Second quarter

    193,192     36,008     4,851     0.28     0.27  

Third quarter

    227,018     39,583     5,733     0.33     0.32  

Fourth quarter

    252,270     36,988     3,363     0.19     0.19  

NOTE 18—SUBSEQUENT EVENTS

        On February 28, 2011, the Company acquired certain assets of Tri-State Implement, Inc. The acquired entity consisted of one agricultural equipment store located in Sioux Falls, South Dakota which is contiguous to the Company's existing construction location in Sioux Falls. The acquisition-date fair value of the total consideration transferred for the dealership was $1.0 million.

        On March 31, 2011, the Company acquired 100% of the outstanding stock of Schoffman's Inc. The acquisition consisted of one agricultural equipment store in Redwood Falls, Minnesota and is contiguous to the Company's existing location in Marshall, Minnesota. The acquisition-date fair value of the total consideration transferred for the dealership was $5.8 million.

        On April 1, 2011, the Company acquired certain assets of ABC Rental & Equipment Sales. The acquired entity consisted of four construction equipment rental stores located in Williston, North Dakota, and Bozeman, Missoula, and Big Sky, Montana. This acquisition expands the Company's opportunity to capitalize on increased activity of the surrounding oil, coal and natural gas exploration and extraction in Montana, North and South Dakota, as well as Wyoming. The acquisition-date fair value of the total consideration transferred for the dealership was $5.4 million.

        On April 15, 2011, the Company entered into a Purchase Agreement to acquire certain assets of Carlson Tractor & Equipment, Inc. The acquisition consists of two construction equipment stores in Rogers and Rosemount, Minnesota and expands the Company's Construction presence in Minnesota. The Company expects the closing date to be on or around May 15, 2011.

89


Table of Contents


Schedule II—Valuation and Qualifying Accounts and Reserves

Titan Machinery Inc.

Classification
  Beginning
Balance
  Additions
Charged to
Expenses
  Deductions
for
Write-offs
  Ending
Balance
 
 
  (in thousands)
 

Valuation reserve deduction from receivables:

                         

Year ended January 31, 2011

  $ 333   $ 805   $ (709 ) $ 429  

Year ended January 31, 2010

    214     458     (339 )   333  

Year ended January 31, 2009

    189     273     (248 )   214  

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

        None.

ITEM 9A.    CONTROLS AND PROCEDURES

        Evaluation of Disclosure Controls and Procedures.    After evaluating the effectiveness of the Company's disclosure controls and procedures pursuant to Rule 13a-15(b) of the Securities Exchange Act of 1934 (the "Exchange Act") as of the end of the period covered by this annual report, our Chief Executive Officer and Chief Financial Officer, with the participation of the Company's management, have concluded that the Company's disclosure controls and procedures (as defined in Exchange Act Rule 13a-15(e)) are effective.

        Management's Report on Internal Control Over Financial Reporting    Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO"). Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of January 31, 2011.

        Eide Bailly LLP, the independent registered public accounting firm that audited the consolidated financial statements included in this Annual Report on Form 10-K, has also audited our internal control over financial reporting as of January 31, 2011, as stated in their attestation report included in Part II, Item 8 of this Annual Report on Form 10-K.

        Changes in Internal Control over Financial Reporting.    There has not been any change in the Company's internal control over financial reporting (as defined in Exchange Act Rule 13a-15(f)) during its most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company's internal control over financial reporting.

ITEM 9B.    OTHER INFORMATION

        Effective February 1, 2011, the base salary for the Company's Chief Executive Officer, David J. Meyer, and President and Chief Operating Officer, Peter J. Christianson, was increased to $330,000 under the amended and restated employment agreements dated October 1, 2010 with Messrs. Meyer and Christianson.

90


Table of Contents


PART III

ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

        Other than the information included in Part I of this Form 10-K under the heading "Executive Officers of the Registrant," the information required by Item 10 is incorporated by reference to the sections labeled "Election of Directors," "Corporate Governance" and "Section 16(a) Beneficial Ownership Reporting Compliance," all of which appear in our definitive proxy statement for our 2011 Annual Meeting.

ITEM 11.    EXECUTIVE COMPENSATION

        The information required by Item 11 is incorporated herein by reference to the sections entitled "Executive Compensation," "Non-Employee Director Compensation," "Compensation Committee," "Compensation Committee Interlocks and Insider Participation" and "Compensation Committee Report," all of which appear in our definitive proxy statement for our 2011 Annual Meeting.

ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

        The information required by Item 12 is incorporated herein by reference to the sections entitled "Principal Stockholders and Management Stockholdings" and "Equity Compensation Plan Information," both of which appear in our definitive proxy statement for our 2011 Annual Meeting.

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

        The information required by Item 13 is incorporated herein by reference to the sections entitled "Corporate Governance—Independence" and "Certain Relationships and Related Party Transactions," both of which appear in our definitive proxy statement for our 2011 Annual Meeting.

ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES

        The information required by Item 14 is incorporated herein by reference to the section entitled "Fees of the Independent Registered Public Accounting Firm," which appears in our definitive proxy statement for our 2011 Annual Meeting.


PART IV

ITEM 15.    EXHIBITS, FINANCIAL STATEMENT SCHEDULES

91


Table of Contents

92


Table of Contents


SIGNATURES

        Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Dated: April 18, 2011

TITAN MACHINERY INC.

By

 

/s/ DAVID J. MEYER

David J. Meyer,
Chairman and Chief Executive Officer

 

By

 

/s/ MARK P. KALVODA

Mark P. Kalvoda
Chief Financial Officer


POWER OF ATTORNEY

        Each person whose signature appears below constitutes DAVID J. MEYER and MARK P. KALVODA his true and lawful attorneys-in-fact and agents, each acting alone, with full power of substitution and resubstitution, for him and in his name, place and stead, in any and all capacities, to sign any or all amendments to this Annual Report on Form 10-K and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, each acting alone, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all said attorneys-in-fact and agents, each acting alone, or his substitute or substitutes, may lawfully do or cause to be done by virtue thereof. Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

Signatures
 
Title
 
Date

 

 

 

 

 
/s/ DAVID J. MEYER

David J. Meyer
  Chairman and Chief Executive Officer
(principal executive officer)
  April 18, 2011

/s/ PETER J. CHRISTIANSON

Peter J. Christianson

 

President and Chief Operating Officer, Director

 

April 18, 2011

/s/ MARK P. KALVODA

Mark P. Kalvoda

 

Chief Financial Officer,
(principal financial officer and principal accounting officer)

 

April 18, 2011

/s/ GORDON PAUL ANDERSON

Gordon Paul Anderson

 

Director

 

April 18, 2011

93


Table of Contents

Signatures
 
Title
 
Date

 

 

 

 

 
/s/ TONY CHRISTIANSON

Tony Christianson
  Director   April 18, 2011

/s/ JAMES WILLIAMS

James Williams

 

Director

 

April 18, 2011

/s/ JAMES IRWIN

James Irwin

 

Director

 

April 18, 2011

/s/ JOHN BODE

John Bode

 

Director

 

April 18, 2011

/s/ THEODORE WRIGHT

Theodore Wright

 

Director

 

April 18, 2011

/s/ STANLEY DARDIS

Stanley Dardis

 

Director

 

April 18, 2011

94


Table of Contents


EXHIBIT INDEX
TITAN MACHINERY INC.
FORM 10-K

 
  Exhibit
No.
  Description
      3.1   Certificate of Incorporation of the registrant(b)

 

 

 

3.2

 

Bylaws of the registrant, as amended(e)

 

 

 

4.1

 

Specimen Certificate representing shares of common stock of Titan Machinery Inc.(c)

 

 

 

4.2

 

Common Stock Purchase Warrant, dated April 7, 2003, in favor of Cherry Tree Securities, LLC(b)

 

 

 

4.3

 

Common Stock Purchase Warrant, dated August 1, 2004, in favor of Cherry Tree Securities, LLC(b)

 

 

 

4.4

 

Form of Director Warrant.**(f)

 

 

 

10.1

 

2005 Equity Incentive Plan**(a)

 

 

 

10.2

 

Amended and Restated Employment Agreement, dated October 1, 2010, between David Meyer and the registrant**(j)

 

 

 

10.3

 

Amended and Restated Employment Agreement, dated October 1, 2010, between Peter Christianson and the registrant**(k)

 

 

 

10.4

 

Non-employee Director Compensation Policy**(c)

 

 

 

10.5

 

Agricultural Equipment Sales & Service Agreement, dated December 31, 2002, between Case, LLC and the registrant(a)

 

 

 

10.6

 

Construction Equipment Sales & Service Agreement, dated effective April 8, 2003, between Case, LLC and the registrant(a)

 

 

 

10.7

 

Dealer Agreement, dated April 14, 2003, between New Holland North America, Inc. and the registrant, as amended December 27, 2005 and December 9, 2006(a)

 

 

 

10.8

 

Construction Equipment Sales & Service Agreement, dated effective June 15, 2006, between CNH America, LLC and the registrant(a)

 

 

 

10.9

 

Dealer Agreement, effective February 20, 2007, between CNH America LLC and the registrant(a)

 

 

 

10.10

 

Dealer Agreement, dated effective June 22, 2006, between CNH America LLC and the registrant(a)

 

 

 

10.11

 

Dealer Agreements, dated effective April 1, 2006, between CNH America and the registrant(a)

 

 

 

10.12

 

Dealer Agreement, dated April 1, 2005, between CNH America LLC and the registrant(a)

 

 

 

10.13

 

Dealer Agreement, dated effective January 1, 2000 between New Holland North America, Inc. and the registrant(a)

 

 

 

10.14

 

Dealer Security Agreements between New Holland North America, Inc. and the registrant(a)

 

 

 

10.15

 

Dealer Security Agreements between CNH America LLC and the registrant(a)

 

 

 

10.16

 

Lease by and between Rocking Horse Farm, LLC and the registrant, dated August 2, 2004, and Addendum No. 1 thereto dated September 13, 2005(a)

95


Table of Contents

 
  Exhibit
No.
  Description
      10.17   Wholesale Floor Plan Credit Facility and Security Agreement, dated as of February 21, 2006, between CNH Capital America LLC and the registrant(a)

 

 

 

10.18

 

Agreement for Wholesale Financing, dated June 29, 2004, between GE Commercial Distribution Finance Corporation and the registrant (and amendments dated January 24, 2007, November 7, 2005, June 29, 2004)(a)

 

 

 

10.19

 

Loan Agreement, dated August 7, 2007, between Bremer Bank, N.A. and the registrant(a)

 

 

 

10.20

 

Shareholder Rights Agreement, dated April 7, 2003, by and between the registrant and the individuals listed on Schedule A(a)

 

 

 

10.21

 

Amendment No. 1 to Shareholder Rights Agreement, dated January 31, 2006, by and between the registrant and the individuals listed on Schedule A(a)

 

 

 

10.22

 

Form of Incentive Stock Option Agreement under the 2005 Equity Incentive Plan**(a)

 

 

 

10.23

 

Form of Non-Qualified Stock Option Agreement under the 2005 Equity Incentive Plan**(a)

 

 

 

10.24

 

Form of Restricted Stock Agreement under the 2005 Equity Incentive Plan**(a)

 

 

 

10.25

 

Amended and Restated Wholesale Floorplan Credit Facility and Security Agreement, dated November 13, 2007, between CNH Capital America LLC and the registrant(b)

 

 

 

10.26

 

Consent and Agreement, dated November 13, 2007, between CNH Capital America LLC and the registrant(b)

 

 

 

10.27

 

Amendment to Case IH Agricultural Equipment Sales and Service Agreement, dated November 14, 2007, between CNH America LLC and Red Power International, Inc.(b)

 

 

 

10.28

 

Amendment to Case IH Agricultural Equipment Sales and Service Agreements, dated November 14, 2007, between CNH America LLC and the registrant(b)

 

 

 

10.29

 

Amendment to Case Construction Equipment Sales and Service Agreements, dated November 14, 2007, between CNH America LLC and the registrant(b)

 

 

 

10.30

 

Amendment to Kobelco Construction Machinery America LLC Dealer Agreement, dated November 14, 2007, between Kobelco Construction Machinery America LLC and the registrant(b)

 

 

 

10.31

 

Amendment to CNH America LLC Dealer Agreement for New Holland Construction Products, dated November 14, 2007, between CNH America LLC and the registrant(b)

 

 

 

10.32

 

Amendment to CNH America LLC Dealer Agreement for New Holland Agricultural Equipment, dated November 14, 2007, between CNH America LLC and the registrant(b)

 

 

 

10.33

 

Recapitalization Agreement, dated effective August 16, 2007, among the registrant, David J. Meyer, C.I. Farm Power, Inc., Peter Christianson, Adam Smith Growth Partners, L.P., Adam Smith Companies, LLC, Tony J. Christianson, Adam Smith Activist Fund, LLC, David Christianson and Earl Christianson(b)

 

 

 

10.34

 

Form of Director and Officer Indemnification Agreement(b)

 

 

 

10.35

 

Agreement, dated July 17, 2007, between Cherry Tree Securities, LLC and the registrant(b)

 

 

 

10.36

 

Amendment to Loan Documents dated December 4, 2007 between the registrant and Bremer Bank, N.A.(d)

96


Table of Contents

 
  Exhibit
No.
  Description
      10.37   Titan Machinery Inc. Fiscal 2009 Non-Employee Director Compensation Plan (incorporated by reference to Exhibit 10.1 to the registrant's Quarterly Report on Form 10-Q for the fiscal quarter ended October 31, 2007).**

 

 

 

10.38

 

Titan Machinery Inc. Executive Bonus Plan (incorporated by reference to Exhibit 10.2 to the registrant's Quarterly Report on Form 10-Q for the fiscal quarter ended October 31, 2007).**

 

 

 

10.39*

 

Compensation Arrangements for Executive Officers**

 

 

 

10.40

 

Loan Agreement, dated July 15, 2009, between Bremer Bank, N.A. and the registrant(g)

 

 

 

10.41

 

Letter Agreement with CNH Capital America, LLC dated November 25, 2009(h)

 

 

 

10.42

 

Second Amended and Restated Agreement for Wholesale Financing, dated March 12, 2010, between GE Commercial Distribution Finance Corporation and the registrant(i)

 

 

 

10.43

 

Letter Agreement with CNH Capital America, LLC dated February 19, 2010(i)

 

 

 

10.44

 

Credit Agreement dated as of October 31, 2010 by and among the registrant, Wells Fargo Bank, National Association, and the Financial Institutions Party Thereto(l)

 

 

 

21

 

Subsidiaries of the Registrant: Transportation Solutions, LLC, a North Dakota limited liability company

 

 

 

23.1*

 

Consent of Eide Bailly, LLP

 

 

 

24.1*

 

Power of Attorney (Included on Signature Page)

 

 

 

31.1*

 

Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

 

 

31.2*

 

Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

 

 

32.1*

 

Certification of Chief Executive Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

 

 

32.2*

 

Certification of Chief Financial Officer Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

*
Filed herewith

**
Indicates management contract or compensatory plan or arrangement.

(a)
Incorporated herein by reference to the cited exhibit in Amendment No. 2 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on October 10, 2007.

(b)
Incorporated herein by reference to the cited exhibit in Amendment No. 5 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on November 27, 2007.

(c)
Incorporated herein by reference to the cited exhibit in Amendment No. 6 to Registration Statement Form S-1, Reg. No. 333-145526, filed with the Commission on December 3, 2007.

(d)
Incorporated herein by reference to the cited exhibit in Amendment No. 7 to Registration Statement on Form S-1, Reg. No. 333-145526, filed with the Commission on December 5, 2007.

(e)
Incorporated herein by reference to the cited exhibit in the registrant's Annual Report on Form 10-K filed with the Commission on April 16, 2009.

97


Table of Contents

(f)
Incorporated herein by reference to Exhibit 10.1 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on June 9, 2009.

(g)
Incorporated herein by reference to Exhibit 10.1 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on September 9, 2009.

(h)
Incorporated herein by reference to Exhibit 10.1 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 10, 2009.

(i)
Incorporated herein by reference to the cited exhibit in the registrant's Annual Report on Form 10-K filed with the Commission on April 15, 2010.

(j)
Incorporated herein by reference to Exhibit 10.1 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 9, 2010.

(k)
Incorporated herein by reference to Exhibit 10.2 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 9, 2010.

(l)
Incorporated herein by reference to Exhibit 10.3 in the registrant's Quarterly Report on Form 10-Q filed with the Commission on December 9, 2010.

98