A-10.31.2014-10K

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
_____________________________________________________________
Form 10-K
_____________________________________________________________
(Mark One)
x
 
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the fiscal year ended October 31, 2014
or
o
 
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the transition period from                 to
Commission File Number: 001-15405
_____________________________________________________________
Agilent Technologies, Inc.
(Exact name of registrant as specified in its charter)
Delaware
 
77-0518772
State or other jurisdiction of
Incorporation or organization
 
I.R.S. Employer
Identification No.
Address of principal executive offices: 5301 Stevens Creek Blvd., Santa Clara, California 95051
Registrant's telephone number, including area code: (408) 345-8886
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which registered
Common Stock
par value $0.01 per share
 
New York Stock Exchange, Inc.
Securities registered pursuant to Section 12(g) of the Act:
None
_____________________________________________________________
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No ¬
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¬ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¬
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¬
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer x
 
Accelerated filer ¬
 
Non-accelerated filer ¬
 
Smaller reporting company ¬
 
 
 
 
(Do not check if a smaller
reporting company)
 
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¬ No x
The aggregate market value of the registrant's common equity held by non-affiliates as of April 30, 2014, was approximately $15.6 billion. Shares of stock held by officers, directors and 5 percent or more stockholders have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of December 1, 2014, there were 335,321,802 outstanding shares of common stock, par value $0.01 per share.
_____________________________________________________________
DOCUMENTS INCORPORATED BY REFERENCE
Document Description
 
10-K Part 
Portions of the Proxy Statement for the Annual Meeting of Stockholders (the "Proxy Statement") to be held on March 18, 2015, and to be filed pursuant to Regulation 14A within 120 days after registrant's fiscal year ended October 31, 2014 are incorporated by reference into Part III of this Report
 
III


Table of Contents            

TABLE OF CONTENTS
 
 
Page
 
 
 
 



2

Table of Contents            

Forward-Looking Statements

This report contains forward-looking statements including, without limitation, statements regarding trends, seasonality, and growth in, and drivers of, the markets we sell into, backlog, our strategic direction, our future effective tax rate and tax valuation allowance, earnings from our foreign subsidiaries, remediation activities, indemnification, new product and service introductions, the ability of our products to meet market needs, changes to our manufacturing processes, the use of contract manufacturers, sources and supply of materials used in our products, the impact of local government regulations on our ability to pay vendors or conduct operations, our liquidity position, our ability to generate cash from operations, growth in our businesses, our investments, the potential impact of adopting new accounting pronouncements, our financial results, our purchase commitments, our contributions to our pension plans, the selection of discount rates and recognition of any gains or losses for our benefit plans, our cost-control activities, timing, savings and headcount reduction recognized from our restructuring programs and other cost saving initiatives, uncertainties relating to Food and Drug Administration ("FDA") and other regulatory approvals, the integration of our acquisitions and other transactions, the separation of the electronic measurement business, transaction expenses related to the separation, post-separation expenses, exiting our Nuclear Magnetic Resonance ("NMR") business, our new organizational structure, our stock repurchase program, our declared dividends, our transition to lower-cost regions, and the existence of economic instability, that involve risks and uncertainties. Our actual results could differ materially from the results contemplated by these forward-looking statements due to various factors, including those discussed in Item 1A and elsewhere in this Form 10-K.

PART I


Item 1.    Business

Overview

Agilent Technologies, Inc. (“we”, “Agilent” or the “company”), incorporated in Delaware in May 1999, is the world's premier measurement company providing core bio-analytical and electronic measurement solutions to the life sciences, diagnostics and genomics, chemical analysis, communications and electronics industries.

On September 19, 2013, Agilent announced plans to separate into two publicly traded companies, one comprising of the life sciences, diagnostics and chemical analysis businesses that will retain the Agilent name, and the other one that will be comprised of the electronic measurement business that will be renamed Keysight Technologies, Inc. (“Keysight”). Keysight was incorporated in Delaware as a wholly-owned subsidiary of Agilent on December 6, 2013. On November 1, 2014, we completed the distribution of 100% of the outstanding common shares of Keysight to Agilent stockholders who received one share of Keysight common stock for every two shares of Agilent held as of the close of business on the record date, October 22, 2014. The historical results of operations and the financial position of Keysight are included in the consolidated financial statements of Agilent and will be reported as discontinued operations beginning in the first quarter of 2015.

In the fourth quarter of 2014, Agilent announced that it is exiting its NMR business. Agilent stopped taking new NMR system orders, but the company will continue to meet customer commitments for orders in progress and for ongoing support contracts and continue to provide service on all installed NMR systems. The company expects that this decision will eliminate about 300 jobs, mostly within the next 12 months. For the year ended October 31, 2014 charges of approximately $68 million were incurred with respect to the exit of this business.

On June 21, 2012, we acquired Dako through the purchase of 100% of the share capital of Dako, a limited liability company incorporated under the laws of Denmark, under the share purchase agreement, dated May 16, 2012. Dako provides antibodies, reagents, scientific instruments and software primarily to customers in pathology laboratories. As a result of the acquisition, Dako has become a wholly-owned subsidiary of Agilent. The consideration paid was approximately $2,143 million, of which $1,400 million was paid directly to the seller and $743 million was paid to satisfy the outstanding debt of Dako. Agilent funded the acquisition using existing cash.

Our life sciences and diagnostics business focuses on the pharmaceutical, academic and government, bio-agriculture, food safety, clinical markets, biotechnology and contract research organization industries. Our chemical analysis business focuses on the petrochemical, environmental, forensics and food safety industries. In addition we conduct centralized order fulfillment and supply chain operations for our life sciences and diagnostics and chemicals analysis businesses through the order fulfillment and supply chain organization (“OFS”). OFS provides resources for manufacturing, engineering and strategic sourcing to our respective businesses. Each of our businesses, together with OFS, is supported by our global infrastructure organization, which provides shared services in the areas of finance, information technology, legal, workplace services and human resources.


3

Table of Contents            

Our electronic measurement business addresses the communications, electronics and other industries. The electronic measurement business conducts centralized order fulfillment and supply organizations and operations through the order fulfillment and infrastructure organization ("OFI"). OFI provide resources for manufacturing, engineering and strategic sourcing to the electronic measurement business. The electronic measurement business, together with OFI, is supported by our global infrastructure organization, which provides shared services in the areas of finance, information technology, legal, workplace services and human resources.

In November 2014, we announced a change in organizational structure designed to better serve our customers. Our life sciences business, excluding the nucleic acid solutions division, together with the chemical analysis business will merge to form a new segment called life sciences and applied markets business. Our diagnostics and genomics businesses will combine and will include the nucleic acid solutions division of our life sciences business to become the diagnostics and genomics segment. Finally, the crosslab segment will be formed from the services and consumables businesses. Financial reporting under this new structure will begin in the first quarter of 2015 with historical financial segment information recast to conform to this new presentation in our financial statements.

We sell our products primarily through direct sales, but we also utilize distributors, resellers, manufacturer's representatives, telesales and electronic commerce. Of our total net revenue of $7.0 billion for the fiscal year ended October 31, 2014, we generated 30 percent in the U.S. and 70 percent outside the U.S. As of October 31, 2014, we employed approximately 21,400 people worldwide. Our primary research and development and manufacturing sites are in California, Colorado and Delaware in the U.S. and in Australia, China, Denmark, Germany, India, Italy, Japan, Malaysia, Poland, Singapore and the United Kingdom.

The net revenue, income from operations and assets by business segment, as of and for the fiscal year ended October 31, 2014 and for each of the past three years are shown in Note 21, "Segment Information", to our consolidated financial statements, which we incorporate by reference herein.

Life Sciences and Diagnostics Business
Our life sciences and diagnostics business provides products that include reagents, instruments, software, consumables, and services that enable customers to identify, quantify and analyze the physical and biological properties of substances and products, as well as enable customers in the clinical and life sciences research areas to interrogate samples at the molecular level. Key product categories include: liquid chromatography ("LC") systems, columns and components; liquid chromatography mass spectrometry ("LCMS") systems; laboratory software and informatics systems; laboratory automation and robotic systems; dissolution testing; nucleic acid solutions; Nuclear Magnetic Resonance ("NMR"), and X-Ray Diffraction (“XRD”) systems; services and support for the aforementioned products; immunohistochemistry (“IHC”); In Situ Hybridization (“ISH”);  Hematoxylin and Eosin (“H&E”) staining; special staining, DNA mutation detection; genotyping; gene copy number determination; identification of gene rearrangements; DNA methylation profiling; gene expression profiling; next generation sequencing (“NGS”) target enrichment; and automated gel electrophoresis-based sample analysis systems. We also collaborate with a number of major pharmaceutical companies to develop new potential pharmacodiagnostics, also called companion diagnostics, with the potential of identifying patients most likely to benefit from a specific targeted therapy.
We employed approximately 5,800 people as of October 31, 2014 in our life sciences and diagnostics business. This business generated revenue of $2.4 billion in fiscal 2014, $2.3 billion in fiscal 2013 and $2.0 billion in fiscal 2012.
Life Sciences and Diagnostics Markets
Our life sciences and diagnostics business focuses primarily on the following three markets:
The Pharmaceutical, Biotechnology, CRO & CMO Market. This market consists of “for-profit” companies who participate across the pharmaceutical value chain in the areas of therapeutic research, discovery & development, clinical trials, manufacturing and quality assurance and quality control. One sub-segment of this market is core and emerging pharmaceutical companies (“pharma”). A second sub-segment includes biotechnology companies (“biotech”), contract research organizations (“CROs”) and contract manufacturing organizations (“CMOs”). Biotech companies and, to a somewhat lesser extent, CROs and CMOs typically participate in specific points in the pharmaceutical industry value chain. Additionally, due to the relatively low drug efficacy within oncology, pharma companies are partnering with diagnostic companies to bring validated tests to the market with their new drugs.
The Life Science Research Market. This market consists primarily of “not-for-profit” organizations and includes academic institutions, large government institutes and privately funded organizations. The life science research market plays an influential role in technology adoption and therapeutic developments for pharmaceutical and molecular diagnostics companies. After decades

4

Table of Contents            

of investment in basic biomedical research by government funding bodies, the focus has widened to include translational research - multidisciplinary scientific efforts directed at accelerating therapy development.
The Diagnostics and Clinical Market. A significant part of our clinical diagnostic customers are in pathology labs throughout the world. Our high-quality, automated pathology tissue staining platforms and solutions are used most heavily by the large labs located in hospitals, medical centers, and reference labs. The market is skewed towards the mature economies, with most of the market in North America, Western Europe and Japan. The mix is changing, however, as emerging markets increase spending on human health.
The clinical market for genomics consists of high complexity clinical labs performing patient testing, including “for-profit” reference laboratories, hospital labs, and molecular diagnostic companies. While these labs primarily purchase in vitro diagnostics (“IVD”) labeled testing kits, they often develop and validate their own molecular based tests. Analyte Specific Reagents (“ASRs”) are often used by these labs.

Life Sciences and Diagnostics Measurement Products and Applications
Our products fall into twelve main areas of work: liquid chromatography, mass spectrometry, software and informatics, lab automation and robotics, automated electrophoresis, NMR systems, life sciences consumables and services, pathology products, specific proteins and flow reagents, target enrichment, cytogenetic research solutions and microarrays, and PCR & qPCR instrumentation and molecular biology reagents. Our key product and applications include the following technologies:
Liquid Chromatography
A liquid chromatograph or a high performance liquid chromatograph (“HPLC”) is used to separate molecules of a liquid mixture to determine the quantity and identity of the molecules present. The Agilent LC portfolio is modular in construction and can be configured as analytical and preparative systems. These systems can be stepwise upgraded to highly sophisticated, automated workflow solutions such as method development, multi‑method/walk-up, high-capacity/high-throughput or multi‑dimensional LC and can be extended to application‑based analyzers e.g. for bio-molecular separations, chiral analysis or size exclusion chromatography. As a leader in liquid chromatography, we continue to expand our application space with new HPLC columns, new services and diagnostics offerings and ongoing instrument and software product enhancements.
Mass Spectrometry
A mass spectrometer (“MS”) identifies and quantifies chemicals based on a chemical's molecular mass and characteristic patterns of fragment ion masses that result when a molecule is broken apart. Liquid chromatography is commonly used to separate compounds and introduce them to the MS system. The combined use of LC and MS is frequently used both to identify and quantify chemical compounds. Mass spectrometry is an important tool in analyzing small molecules and can also be used to characterize and quantify proteins and other biological entities. Agilent's LCMS portfolio includes instruments built around four main analyzer types - single quadrupole, triple quadrupole, time-of-flight (“TOF”) and quadrupole time-of-flight (“QTOF”). We significantly expanded our mass spectrometry portfolio in recent years with a focus on improving performance, sensitivity, and ease of use.
Software and Informatics
We provide software for instrument control, data acquisition, data analysis, laboratory content and business process management, and informatics. Our software facilitates the regulatory‑compliant use of instruments in pharmaceutical quality assurance/quality control environments. With OpenLab Laboratory Software Suite, Agilent has a scalable, open software platform that enables customers to capture, analyze, and share scientific data throughout the lab and across the enterprise.
Lab Automation and Robotics
We offer a comprehensive suite of workflow solutions to our life science customers with the addition of automated liquid handling and robotics that range from standalone instrumentation to bench-top automation solutions to large, multi‑armed robotic systems. These solutions strengthen our offering of automated sample‑preparation solutions across a broad range of applications. In fiscal 2012 we acquired AssayMAP technology, which in combination with Agilent's Bravo liquid handling platform enables highly parallel automated microchromatography for protein purification and characterization.

5

Table of Contents            

Automated Electrophoresis and Microfluidics
Automated electrophoresis is a separation technique for bio molecules such as proteins, peptides and nucleic acids (RNA and DNA) and is used to determine the identity of a molecule by either size or charge. It is widely used as a QC tool to check sample integrity prior to subsequent analysis. Prominent examples are nucleic acid preparation products in front of polymerase chain reaction, NGS and microarrays.
NMR and XRD
NMR, spectrometers and XRD systems are used in a variety of industries including academic and not-for-profit research, life sciences (pharma and biotech), and industrial companies. All of these technologies are utilized for basic and applied research, and NMR is also used in process development and manufacturing QA/QC. In the fourth quarter of 2013, we announced the termination of our involvement in MRI systems. In the fourth quarter of 2014, we announced the termination of our nuclear magnetic resonance ("NMR") product line and our decision to cease the manufacture and sale of these items.
Consumables and Services
We also offer a broad range of consumable products, which support our LC and MS technology platforms. These consumable products include sample preparation products; self-manufactured LC columns, instrument replacement parts, and consumable supplies to meet our customers' analysis needs. All of our products are designed to Agilent's specifications to improve and maximize the performance of our instruments.
We offer a wide range of startup, operational, educational and compliance support services for our measurement and data handling systems. Our support services include maintenance, troubleshooting, repair and training for all of our chemical and bioinstrumentation analysis hardware and software products. Special service bundles have also been designed to meet the specific application needs of various industries.
Pathology

This area consists of routine clinical solutions for tissue based cancer diagnostics with solutions that comprise antibodies, reagents, instruments and software targeting both primary and advanced cancer diagnostics. Our CoverStainer and Artisan based product families target primary cancer diagnostics through Hematoxylin and Eosin staining as well as Special Stains for additional insights and detection of potentially carcinogenic tissue. In the fourth quarter of 2013, we launched our new combined IHC/ISH platform, Dako Omnis. The Dako Omnis and Autostainer based IHC solution and Instant Quality Fluorescence In Situ Hybridization ("IQFISH") technologies provide advanced tumor typing through investigation of protein and gene expression. These products also include companion diagnostic tests that are used to help identify patients most likely to benefit from a specific targeted therapy.
Specific Proteins and Flow Reagents

Our reagent OEM business is a provider of clinical diagnostic products within the areas of specific proteins for turbidimetry and reagents for flow cytometry. These are sold OEM as customized reagent solutions supplied to top IVD companies or through retail partners.

Target Enrichment

Agilent continues to be a strong player in the next generation sequencing market. We provide a target enrichment portfolio composed of two main platforms, SureSelect and HaloPlex, both enabling customers to select specific target regions of the genome for sequencing. Customers can customize our products for their regions of interest using the SureDesign software, or they can choose from a wide range of catalog products, including gene panels for specific applications and Exome designs, which allow analysis of the entire coding sequences of the genome. After preparing samples with SureSelect and HaloPlex, products can be sequenced in the main next generation sequencing platforms available in the market. The technologies provide an easy sample prep workflow that can be automated with Agilent Bravo platform for scalability. HaloPlex provides less-than-24-hours fast workflow, which makes it suitable for labs that require fast turnaround time from sample to results. These products are used for mutation detection and genotyping. Results can be easily analyzed using Agilent software solutions GeneSpring or SureCall.

Cytogenetic Research Solutions and Microarrays

Agilent is a leading provider of microarrays for Comparative Genomic Hybridization (“CGH”), mostly used by customers in cytogenetic laboratories. The arrays allow customers to detect genome-wide copy number alterations, with high levels of resolution (from entire chromosomal copy number changes to specific microdeletions or duplications). The arrays are offered in

6

Table of Contents            

many formats allowing the customers to choose from different levels of resolution and number of samples per arrays. Arrays can also be customized using the SureDesign software. In addition to the microarrays, Agilent's solution includes reagents for sample processing, hardware for reading the microarrays, and software to help users view the data in a meaningful way. In addition to the CGH portfolio, the cytogenetics solution comprises a line of oligonucleotide probes for Fluorescent In Situ Hybridization ('FISH') called SureFISH. Over 400 probes are available in our catalog, covering most relevant regions in the genome. Cytogenetic labs can use SureFISH probes to detect specific translocations or copy number changes in samples. Additionally, Agilent provides a wide range of microarrays to the research market for different types of applications: gene expression, microRNA, methylation, splice variants, and chromatin immunoprecipitation applications. Arrays are offered as catalog designs or customizable designs, with no minimum order size and short delivery time, which differentiates us from other vendors and enables researchers the maximum flexibility in their studies. Our end-to-end solution includes reagents for sample preparation and microarray processing; hardware for sample QC and high-throughput microarray scanning; microarrays on industry-standard 1” × 3” glass slides for key applications; custom microarray design services; and GeneSpring software products for data analysis.

PCR & qPCR Instrumentation and Molecular Biology Reagents

Polymerase Chain Reaction (“PCR”) is a standard laboratory method used to amplify the amount of genetic material of a given sample to enable further interrogation.  Quantitative PCR (“qPCR”) or real time PCR is also a standard method used in genomic research facilities to measure the amount of a specific nucleic acid sequence within a sample.  There are several applications for qPCR, among the most common are identifying the expression level of a specific gene, or calculating the amount of a specific pathogen present in a sample. Agilent offers a complete portfolio of PCR & qPCR instruments, as well as specialty enzymes for amplifying difficult sample types. In addition to PCR and qPCR enzymes, Agilent offers a wide range of molecular biology reagents including tools for cloning and mutagenesis applications.

Life Sciences and Diagnostics Customers
We had approximately 45,000 customers for our life sciences and diagnostics business in 2014. No single customer represented a material amount of the net revenue of the life sciences and diagnostics business. A significant number of our life sciences and diagnostics customers are also customers of our chemical analysis business.
The life sciences and diagnostics business is susceptible to seasonality in its orders and revenues primarily based on U.S. and foreign government budgets and large pharmaceutical company budgets. In general, the result is that our third and fourth fiscal quarters tend to deliver the strongest profits for this group. The diagnostics business is generally a fairly stable business impacted primarily by local holidays. However, general economic trends, new product introductions and competition might overshadow this trend in any given year.
Life Sciences and Diagnostics Sales, Marketing and Support
The life science and diagnostics channels focus on the therapeutics and human disease research customer base (pharma, biotech, CRO, CMO and generics), clinical customer base (pathology labs and high complexity clinical testing labs) and on emerging life sciences opportunities in life science research institutes. We deploy a multi-channel approach, marketing products to our customers through direct sales, electronic commerce, resellers, manufacturers' representatives and distributors. We primarily use direct sales to market our solutions to our pharmaceutical, biopharmaceutical and clinical accounts. Sales agents supplement direct sales by providing broader geographic coverage and coverage of smaller accounts. Our active reseller program augments our ability to provide more complete solutions to our customers. We sell our consumable products through distributors, telesales, electronic commerce and direct sales. We utilize telesales for more mature product lines, as well as for reorders of reagent products.
We deliver our support services to customers in a variety of ways, including on-site assistance with repair or exchange of returned products, telephone support and self-diagnostic services provided over the Internet. We also offer special industry-focused service bundles that are designed to meet the specific needs of hydrocarbon processing, environmental, pharmaceutical and biopharmaceutical customers to keep instruments fully operational and compliant with the respective industry requirements. Our products typically come with standard warranties, and extended warranties are available for additional cost. Our complete pathology solutions are often sold with both application and technical service support.

7

Table of Contents            

Life Sciences and Diagnostics Manufacturing
Our manufacturing supports our diverse product range and customer‑centric focus. We assemble highly configurable products to individual customer orders and make standard products to stock. We employ advanced manufacturing techniques and supply chain management systems to reduce costs and manufacturing cycle times. Our manufacturing process then converts these designs into custom products for shipment to customers. We selectively use third parties to provide some supply chain processes for manufacturing, warehousing and logistics. We have manufacturing facilities in California, Colorado and North Carolina in the U.S. Outside of the U.S., we have manufacturing facilities in Germany, Malaysia, Poland, Singapore and the U.K. Our FDA registered sites include Texas, Denmark and California. We utilize just-in-time manufacturing.
Life Sciences and Diagnostics Competition
The markets for analytical instruments, diagnostics and genomics products in which we compete are characterized by evolving industry standards and intense competition. Our principal competitors in the life sciences and diagnostics arena include: Bruker Corp., Danaher Corporation, Thermo Fisher Scientific Inc., Waters Corp, Affymetrix Inc., Illumina, Inc., Life Technologies Corp, Abbott Laboratories, Sakura and Roche. Agilent competes on the basis of product performance, reliability, support quality, applications expertise, global channel coverage and price.

Life Sciences and Diagnostics Government Regulation
Some of the products the life sciences and diagnostics group sells are subject to regulatory approval by the FDA and other regulatory bodies throughout the world.  These regulations govern a wide variety of product related activities, from quality management, design and development to labeling, manufacturing, promotion, sales and distribution.  We continually invest in our manufacturing infrastructure to gain and maintain certifications necessary for the level of clearance. During 2014, we have made investments to address the requirements of the FDA warning letter received related to our life sciences and diagnostics business.

Chemical Analysis Business

Our chemical analysis business provides application-focused solutions that include instruments, software, consumables, and services that enable customers to identify, quantify and analyze the physical and biological properties of substances and products. Key product categories in chemical analysis include: gas chromatography ("GC") systems, columns and components; gas chromatography mass spectrometry ("GC-MS") systems; inductively coupled plasma mass spectrometry ("ICP-MS") instruments; atomic absorption ("AA") instruments; microwave plasma-atomic emission spectrometry (“MP-AES”) instruments; inductively coupled plasma optical emission spectrometry ("ICP-OES") instruments; software and data systems; vacuum pumps and measurement technologies; services and support for our products.

We employed approximately 4,100 people as of October 31, 2014 in our chemical analysis business. This business generated revenue of $1.7 billion in fiscal 2014, $1.6 billion in fiscal 2013, and $1.6 billion in fiscal 2012.

Chemical Analysis Markets

Within chemical analysis, we focus primarily on the following applied markets:

The Chemical & Energy Market.    The natural gas and petroleum refining markets use our products to measure and control the quality of their finished products and to verify the environmental safety of their operations. Petroleum refiners use our measurement solutions to analyze crude oil composition, perform raw material analysis, verify and improve refining processes and ensure the overall quality of gasoline, fuels, lubricants and other products. Our solutions are also used in the development, manufacturing and quality control of fine chemicals.

The Environmental & Forensics Market.    Our instruments, software and workflow solutions are used by the environmental market for applications such as laboratory and field analysis of chemical pollutants in air, water, soil and solid waste. Environmental industry customers include all levels of government, the industrial and manufacturing sectors, engineering and consulting companies, commercial testing laboratories and colleges and universities. Drug testing and forensics laboratories use our instruments, software and workflow solutions for applications such as analyzing evidence associated with crime, screening athletes for performance enhancing drugs, analyzing samples for recreational drugs, or detecting and identifying biological and chemical warfare agents. This instrumentation is used in either static or mobile laboratories. Customers include local, state, federal, and international law enforcement agencies and health laboratories.


8

Table of Contents            

The Food Market.    Our instruments, software, and workflow solutions are used throughout the food production chain, including incoming inspection, new product development, quality control and assurance, and packaging. For example, our mass spectrometer portfolio is used to analyze contaminants and residual pesticides in food. There is also a significant food safety market involved in analyzing food for pathogen contamination, accurate verification of species type and evidence of genetically modified content.

Chemical Analysis Products

A key factor in all of our chemical analysis markets is the need for new products that increase customer productivity and provide high quality data that enable decision-making by our customers. Our key product and applications include the following technologies:

Gas Chromatography

Agilent is the world's leading provider of gas chromatographs, both laboratory and portable models. A gas chromatograph ("GC") is used to separate any gas, liquid or solid that can be vaporized and then detect the molecules present to determine their identity and quantity. Agilent provides custom or standard analyzers configured for specific chemical analysis applications, such as detailed speciation of a complex hydrocarbon stream, calculation of gas calorific values in the field, or analysis of a new bio-fuel formulation. We also offer related software, accessories and consumable products for these and other similar instruments.

Mass Spectrometry

Mass spectrometry ("MS") is a technique for analyzing the individual chemical components of substances by ionizing them and determining their mass-to-charge ratios. Our MS products incorporate various technologies for measuring mass, including single-quadrupole, triple-quadrupole, quadrupole time-of-flight and ion trap mass spectrometers. We combine our mass spectrometers with other instruments to create high-performance instruments such as gas chromatograph mass spectrometers ("GC/MS"), and inductively coupled plasma mass spectrometers ("ICP-MS"). We also offer related software, accessories and consumable products for these and other similar instruments.

Spectroscopy

Spectroscopy is a technique for analyzing the individual chemical components of substances based on the absorption or emission of electromagnetic radiation of specific wavelengths of light. Our spectroscopy instruments include atomic absorption ("AA") spectrometers, microwave plasma-atomic emission spectrometers (“MP-AES”), inductively coupled plasma-optical emissions spectrometers ("ICP-OES"), inductively coupled plasma-mass spectrometers ("ICP-MS"), fluorescence spectrophotometers, ultraviolet- visible ("UV-Vis") spectrophotometers, Fourier Transform infrared ("FT-IR") spectrophotometers, near-infrared ("NIR") spectrophotometers, Raman spectrometers and sample automation products. We also offer related software, accessories and consumable products for these and other similar instruments.

Vacuum Technology

Our vacuum technologies products are used to create, control, measure and test vacuum environments in life science, industrial and scientific applications where ultra-clean, high-vacuum environments are needed. Vacuum technologies' customers are typically OEMs that manufacture equipment for these applications. Products include a wide range of high and ultra-high vacuum pumps (diffusion, turbomolecular and ion getter), intermediate vacuum pumps (rotary vane, sorption and dry scroll), vacuum instrumentation (vacuum control instruments, sensor gauges and meters) and vacuum components (valves, flanges and other mechanical hardware). These products also include helium mass spectrometry and helium-sensing leak detection instruments used to identify and measure leaks in hermetic or vacuum environments. In addition to product sales, we also offer a wide range of services including an exchange and rebuild program, assistance with the design and integration of vacuum systems, applications support and training in basic and advanced vacuum technologies.

Consumables and Services

We offer a broad range of consumable products, which support our technology platforms, including sample preparation consumables such as solid phase extraction ("SPE") and filtration products, self-manufactured GC and LC columns, chemical standards, and instrument replacement parts. Consumable products also include scientific instrument parts and supplies such as filters and fittings for GC systems; xenon lamps and cuvettes for UV-Vis-NIR, fluorescence, FT-IR and Raman spectroscopy instruments; and graphite furnace tubes, hollow cathode lamps and specialized sample introduction glassware for our AA, ICP-OES and ICP-MS products.

9

Table of Contents            


We offer a wide range of startup, operational, educational and compliance support services for our measurement and data handling systems. Our support services include maintenance, troubleshooting, repair and training for all of our chemical and bioinstrumentation analysis hardware and software products. Special service bundles have also been designed to meet the specific application needs of various industries.

Chemical Analysis Customers

We had approximately 37,000 customers for our chemical analysis business in 2014. No single customer represented a material amount of the net revenue of the chemical analysis business. A significant number of our chemical analysis customers are also customers of our life sciences and diagnostics business.

The chemical analysis business is susceptible to seasonality in its orders and revenues primarily based on U.S. government and large company budgets. The result is that our fourth fiscal quarter tends to deliver the strongest profits for this business. However, general economic trends, new product introductions and competition might overshadow this trend in any given year.

Chemical Analysis Sales, Marketing and Support

Our sales and support delivery channels are aligned by key markets. We market products to our customers through direct sales, electronic commerce, resellers, manufacturers' representatives and distributors. Additionally, we are optimizing our worldwide distribution capabilities to address high-growth opportunities such as the environmental and food safety markets in the Asia-Pacific region.

We use direct sales to market our solutions to our large- and medium-sized chemical customers and environmental accounts. Sales agents supplement direct sales by providing broader geographic coverage and coverage of smaller accounts. Our active reseller program augments our ability to provide more complete solutions to our customers. We sell our consumable products through distributors, telesales, electronic commerce and direct sales.

We deliver our support services to customers in a variety of ways, including on-site assistance with repair or exchange of returned products, telephone support and self-diagnostic services provided over the Internet. We also offer special industry-focused service bundles that are designed to meet the specific needs including those for hydrocarbon processing and environmental customers to keep instruments fully operational and compliant with the respective industry requirements. Our products typically come with standard warranties, and extended warranties are available for additional cost.

Chemical Analysis Manufacturing

Our manufacturing supports our diverse product range and customer-centric focus. We assemble highly configurable products to individual customer orders and make standard products to stock. We employ advanced manufacturing techniques and supply chain management systems to reduce costs and manufacturing cycle times. We selectively use third parties to provide some supply chain processes for manufacturing, warehousing and logistics. We have manufacturing facilities in California, Delaware, and Connecticut in the U.S. Outside of the U.S., we have manufacturing facilities in Australia, Canada, China, Italy, Malaysia, Netherlands, Japan, and the United Kingdom. We utilize just-in-time manufacturing and so typically do not maintain a high level of inventory.

Chemical Analysis Competition

The markets for analytical instruments in which we compete are characterized by evolving industry standards and intense competition. Our principal competitors in the chemical analysis arena include: Bruker Corporation, PerkinElmer Inc., Shimadzu Corporation and Thermo Fisher Scientific Inc. Agilent competes on the basis of product performance, reliability, support quality, applications expertise, global channel coverage and price.

Electronic Measurement Business

Our electronic measurement business provides electronic measurement instruments and systems, software design tools and related services that are used in the design, development, manufacture, installation, deployment and operation of electronics equipment, and microscopy products. Related services include start-up assistance, instrument productivity and application services and instrument calibration and repair. We also offer customization, consulting and optimization services throughout the customer's product lifecycle.


10

Table of Contents            

Our electronic measurement business employed approximately 8,300 people as of October 31, 2014. Our electronic measurement business generated $2.9 billion in revenue in fiscal 2014, $2.9 billion in revenue in fiscal 2013 and $3.3 billion in revenue in fiscal 2012.

Beginning November 1, 2014, as a result of the separation of Keysight, Agilent no longer sells products and services from the electronic measurement business.

Electronic Measurement Markets

Our electronic measurement products serve the following markets:

The Communications Test Market

We market our electronic measurement products and services to network equipment manufacturers ("NEMs"), wireless device manufacturers, and communications service providers, including the component manufacturers within the supply chain for these customers. Growth in mobile data traffic and increasing complexity in semiconductors and components are drivers of test demand across the communications market.

NEMs manufacture and sell products to facilitate the transmission of voice, data and video traffic. The NEMs' customers are communications service providers that deploy and operate the networks and services as well as distribute end-user subscriber devices, including wireless personal communication devices and set-top boxes. To meet their customers' demands, NEMs require test and measurement instruments, systems and solutions for the development, production and installation of each network technology.

Wireless device manufacturers require test and measurement products for the design, development, manufacture and repair of mobile devices. These mobile devices are used for voice, data and video delivery to individuals who connect wirelessly to the service provider's network. The device manufacturers' primary customers are large and small service providers and consumers
who purchase devices directly from retailers. Wireless device manufacturers require test and measurement products that enable technology development in conformance with the latest communications standards.

Communications service providers require reliable network equipment that enables new service offerings and allows their networks to operate at ever-increasing capacities. To achieve this, communications service providers require a range of sophisticated test instruments and systems to monitor and evaluate network performance and to identify any sources of communications failure throughout the wireless and fiber optic networks.

Component manufacturers design, develop and manufacture electronic components and modules used in network equipment and wireless devices. The component manufacturers require test and measurement products to verify that the performance of their components and modules meet the specifications of their NEM and device customers.

The communications test market accounted for approximately 34 percent of revenue from our electronic measurement business in 2014.

The General Purpose Test Market

We market our general purpose test products and services to the electronics industry and other industries with significant electronic content such as the aerospace and defense, computer and semiconductor industries. These electronics and electronics-dependent industries design, develop and manufacture a wide range of products, including those produced in high volumes, such as computers, computer peripherals, electronic components, consumer electronics, enterprise servers, storage networks and automotive electronics. The components, printed circuit assemblies and functional devices for these products may be designed, developed and manufactured by electronic components companies, by original equipment manufacturers or by contract manufacturers. Other industrial applications for products include power, energy, medical, research and education.

For the development and timely commercialization of new technologies, manufacturers require state-of-the-art test instruments, systems and design software in order to design products for efficient and cost-effective manufacturing and to validate product performance in a variety of configurations and environments.

Customers use our general purpose test solutions in developing and manufacturing a wide variety of electronic components and systems. These customers' test requirements include testing the electrical parameters of digital, radio frequency, and microwave frequency components and assemblies; testing multiple parameters of the printed circuit boards used in almost every electronic

11

Table of Contents            

device; testing of the final product; and testing of systems containing multiple electronic instruments. For semiconductor and board test applications, customers use our solutions in the design, development, manufacture, installation, deployment, and operation of semiconductor and printed circuit assembly fabrication.
The general purpose test market accounted for approximately 66 percent of revenue from our electronic measurement business in 2014.

Electronic Measurement Applications

We divide our electronic measurement products into communications test products and general purpose test products.

Communications Test

We sell products and services applicable to a wide range of communications networks and systems including wireless communications and microwave networks, voice, broadband, data, and fiber optic networks. Test products include electronic design automation ("EDA") software, vector and signal analyzers, signal generators, vector network analyzers, one box testers, oscilloscopes, logic and protocol analyzers, and bit-error ratio testers.

Our wireless communications and microwave network products include radio frequency and microwave test instruments and EDA software tools. These products are required for the design and production of wireless network products, communications links, cellular handsets and base stations. We provide handheld instruments for the installation and maintenance of wireless networks. Our high-frequency EDA software tools and instruments are used by radio frequency integrated circuit design engineers to model, simulate and analyze communications product designs at the circuit and system levels. Our customers are also applying this technology more frequently to model signal integrity problems in digital design applications as digital speeds continue to increase.

Our suite of fiber optic test products measure and analyze a wide variety of critical optical and electrical parameters in fiber optic networks and their components. Components which can be tested with Agilent solutions include source lasers, optical amplifiers, filters and other passive components. Test products include optical modulation analyzers, optical component analyzers, optical power meters, and optical laser source products.

General Purpose Test

We sell the following types of products into the general purpose test market: general purpose instruments, modular instruments and test software, digital test products, semiconductor and board test solutions, electronics manufacturing test equipment, atomic force microscopes and network surveillance solutions.

General purpose instruments are used principally by engineers in research and development laboratories, manufacturing, and calibration and service, for measuring voltage, current, frequency, signal pulse width, modulation and other complex electronics measurements. Our general purpose products include spectrum analyzers, network analyzers, signal generators, logic analyzers, digitizing oscilloscopes, voltmeters, multimeters, frequency counters, bench and system power supplies, function generators and waveform synthesizers.

Modular instruments and test software are used by engineers and scientists in the design and manufacture of electronic devices and for data collection in many diverse experiments and systems. The building blocks of these systems can be configured for a wide variety of test applications and offer the flexibility to be changed by recombining modular hardware and software components as needed. Examples include test systems for wireless semiconductors; aviation communication, navigation and radar systems; and high energy physics research.

Our digital test products are used by research and development engineers across a broad range of industries to validate the function and performance of their digital product and system designs. These designs include a wide range of products from simple digital control circuits to complex high speed systems such as computer servers and the latest generation gaming consoles. . The
test products offered include oscilloscopes, logic and serial protocol analyzers, sources, arbitrary waveform generators, and bit error rate testers. Our customers also use our EDA software tools to model signal integrity problems in digital design applications as digital speeds continue to increase.

Our semiconductor and board test solutions enable customers to develop and test state of the art semiconductors, test and inspect printed circuit boards, perform functional testing, and measure position and distance information to the sub-nanometer level. We supply parametric test instruments and systems used primarily to examine semiconductor wafers during the manufacturing process. Our in-circuit test system helps identify quality defects, such as faulty or incorrect parts, that affect electrical performance.

12

Table of Contents            

Our laser interferometer measurement systems are based on precision optical technology and provide precise position or distance information for dimensional measurements.

Our surveillance systems and subsystems are used by defense and government engineers and technicians to detect, locate and analyze signals of interest. The products offered include probes for detecting signals and software that enables the identification
and analysis of these signals.

Electronic Measurement Customers

Agilent's electronic measurement customers include original equipment and contract manufacturers of electronic products, wireless device manufacturers and network equipment manufacturers who design, develop, manufacture and install network equipment, service providers who implement, maintain and manage communication networks and services, and companies who design, develop, and manufacture semiconductors and semiconductor lithography systems. Our customers use our products to conduct research and development, manufacture, install and maintain radio frequency, microwave frequency, digital, semiconductor, and optical products and systems and conduct nanotechnology research. Many of our customers purchase solutions across several of our major product lines for their different business units.

We had approximately 14,000 customers for electronic measurement products in fiscal 2014 and no single customer represented a material amount of the net revenue of the electronic measurement business.

In general, the orders and revenues from many of the electronic measurement markets and product categories are seasonal, traditionally marked by lower business levels in the first quarter of the fiscal year and higher volumes in the fourth quarter of the fiscal year. This seasonality is particularly evident in products that we sell into the aerospace and defense industry, as well as those linked to consumer spending, which includes some of our communications test equipment. The seasonal impact of our business is tempered by broader economic trends and the diversity of our electronic measurement products and customers, which span multiple industries.

Electronic Measurement Sales, Marketing and Support

We have a focused sales strategy, using a direct sales force, resellers, manufacturer's representatives and distributors to meet our customers' needs. Our direct sales force is focused on identifying customer needs and recommending solutions involving the effective use and deployment of our equipment, services, systems and capabilities. Some members of our direct sales force focus on global accounts, providing uniform services on a worldwide basis. Others focus on our more complex products such as our high-performance instruments, where customers require strategic consultation. Our sales force also engages with the contract manufacturer market by collaborating with original equipment manufacturers to specify our test equipment for contract manufacturer test applications, as well as marketing to contract manufacturers directly.

Our direct sales force consists of field engineers and systems engineers who have in-depth knowledge of the customers' business and technology needs. Our systems engineers provide a combination of consulting, systems integration and application and software engineering services and are instrumental in all stages of the sale, implementation and support of our complex systems and solutions.

To complement our direct sales force we have agreements with many channel partners around the world. These partners, including resellers, manufacturer's representatives, and distributors, serve Agilent's customers across a number of product lines and provide the same level of service and support expected from our direct channel. Lower dollar transactions can also be served by our tele-sales and electronic commerce channels.

Our products typically come with three year standard warranties, and extended warranties are available at additional cost.

Electronic Measurement Manufacturing

We concentrate our electronic measurement manufacturing efforts primarily on final assembly and test of our products. To maximize our productivity and our ability to respond to market conditions, we use contract manufacturers for the production of printed circuit boards, sheet metal fabrication, metal die-casting, plastic molding and standard electronic components. We also manufacture proprietary devices and assemblies in our own fabrication facilities for competitive advantage. We have manufacturing facilities in California and Colorado in the U.S. Outside of the U.S. we have manufacturing facilities in China, Germany, Japan and Malaysia.


13

Table of Contents            

We generally only manufacture products when we have received firm orders for delivery and do not generally hold large stocks of finished inventory.

Electronic Measurement Competition

The market for electronic measurement equipment is highly competitive. Our electronic measurement business competes with a number of significant competitors in all our major product categories and across our targeted industries. In the communications test market our primary competitors are Aeroflex Incorporated, Anritsu Corporation, Ansoft Corporation (a subsidiary of Ansys Corporation), National Instruments Corporation, Rohde & Schwarz GmbH & Co. KG, Tektronix, Inc. (a subsidiary of Danaher Corporation) and Teradyne, Inc. In the general purpose test market, we compete against companies such as Aeroflex Incorporated (recently acquired by Cobham plc), Bruker Corporation, Fluke Corporation (a subsidiary of Danaher Corporation), Teledyne Technologies Incorporated, National Instruments Corporation, Rohde & Schwarz GmbH & Co. KG, Tektronix, Inc. (a subsidiary of Danaher Corporation), Teradyne, Inc., Test Research Inc., and Ametek, Inc.

Our electronic measurement business offers a wide range of products, and these products compete primarily on the basis of product quality and functionality, as well as performance and reliability.

Agilent Technologies Research Laboratories

Agilent Technologies Research Laboratories ("Research Labs") is our research organization based in Santa Clara, California, with offices in Europe and Asia. The Research Labs create competitive advantage through high-impact technology, driving market leadership and growth in Agilent's core businesses and expanding Agilent's measurement footprint into adjacent markets. At the cross-roads of the organization, the Research Labs are able to identify and enable synergies across Agilent's businesses to create competitive differentiation and compelling customer value.

The technical staff have advanced degrees that cover a wide range of scientific and engineering fields, including biology, chemistry, computer science, distributed measurement, electrical engineering, image processing, materials science, mathematics, nano/microfabrication, microfluidics, software, informatics, optics, physics, physiology and signal processing.

Global Infrastructure Organization

We provide support to our businesses through our global infrastructure organization. This support includes services in the areas of finance, legal, workplace services, human resources and information technology. Generally these organizations are centrally operated from Santa Clara, California, with services provided worldwide. As of the end of October 2014, our global infrastructure organization employed approximately 3,200 people worldwide.

Agilent Order Fulfillment Organizations

Beginning in fiscal year 2014, we created the order fulfillment and supply chain organization (“OFS”) to centralize all order fulfillment and supply chain operations in our life sciences and diagnostics and chemicals analysis businesses.  Similarly we created the order fulfillment and infrastructure (“OFI”) organization to centralize all order fulfillment and supply organizations and operations within our electronic measurement business. Both OFS and OFI provide resources for manufacturing, engineering and strategic sourcing to our respective businesses. In general, OFS and OFI employees are dedicated to specific businesses and the associated costs are directly allocated to those businesses.

        The following discussions of Research and Development, Backlog, Intellectual Property, Materials, Environmental, International Operations and Acquisition and Disposal of Material Assets include information common to each of our businesses.

Research and Development

Research and development ("R&D") expenditures were $719 million in 2014, $704 million in 2013 and $668 million in 2012, the vast majority of which was company-sponsored. We anticipate that we will continue to have significant R&D expenditures in order to maintain our competitive position with a continuing flow of innovative, high-quality products and services.

Backlog

Backlog represents the amount of revenue expected from orders that have already been booked, including orders for goods and services that have not been delivered to customers, orders invoiced but not yet recognized as revenue, and orders for goods

14

Table of Contents            

that were shipped but not invoiced, awaiting acceptance by customers.
On October 31, 2014, our unfilled backlog for the chemical analysis business was approximately $430 million, as compared to approximately $380 million at October 31, 2013. Within our life sciences and diagnostics business, our unfilled backlog was approximately $530 million on October 31, 2014 as compared to approximately $520 million at October 31, 2013.

On October 31, 2014, our unfilled backlog for the electronic measurement business was approximately $780 million, as compared to approximately $760 million at October 31, 2013. It is expected that the unfilled backlog will be fulfilled by Keysight which separated from Agilent on November 1, 2014.

We expect that a majority of the unfilled backlog for all businesses will be delivered to customers within six months. On average, our unfilled backlog represents approximately three months' worth of revenues. We believe backlog on any particular date, while indicative of short-term revenue performance, is not necessarily a reliable indicator of medium or long-term revenue performance.

Intellectual Property

We generate patent and other intellectual property rights covering significant inventions and other innovations in order to create a competitive advantage. While we believe that our licenses, patents and other intellectual property rights have value, in general no single license, patent or other intellectual property right is in itself material. In addition, our intellectual property rights may be challenged, invalidated or circumvented or may otherwise not provide significant competitive advantage.

Materials

Our manufacturing operations employ a wide variety of semiconductors, electromechanical components and assemblies and raw materials such as plastic resins and sheet metal. Our electronic measurement, chemical analysis, life sciences and diagnostics businesses all purchase materials from thousands of suppliers on a global basis. Some of the parts that require custom design work are not readily available from alternate suppliers due to their unique design or the length of time necessary for design work. Our long-term relationships with suppliers allow us to proactively manage technology road maps and product discontinuance plans and monitor their financial health. Even so, some suppliers may still extend their lead times, limit supplies, increase prices or cease to produce necessary parts for our products. If these are unique components, we may not be able to find a substitute quickly or at all. To address the potential disruption in our supply chain, we use a number of techniques, including qualifying multiple sources of supply and redesign of products for alternative components. In addition, while we generally attempt to keep our inventory at minimal levels, we do purchase incremental inventory as circumstances warrant to protect the supply chain.

Environmental

Our R&D, manufacturing and distribution operations involve the use of hazardous substances and are regulated under international, federal, state and local laws governing health and safety and the environment. We apply strict standards for protection of the environment and occupational health and safety to sites inside and outside the U.S., even if not subject to regulation imposed by foreign governments. We believe that our properties and operations at our facilities comply in all material respects with applicable environmental laws and occupational health and safety laws. However, the risk of environmental liabilities cannot be completely eliminated and there can be no assurance that the application of environmental and health and safety laws to Agilent will not require us to incur significant expenditures. We are also regulated under a number of international, federal, state, and local laws regarding recycling, product packaging and product content requirements. The environmental, product content/disposal and recycling laws are gradually becoming more stringent and may cause us to incur significant expenditures in the future.

Certain properties transferred to Keysight as part of the separation are known to have subsurface contamination undergoing remediation by our former parent company, Hewlett-Packard Company ("HP"). In addition, a subset of these properties are undergoing remediation by HP under an order of an agency of the state in which the property is located. As part of the initial separation agreement from HP in 1999, HP agreed to retain the liability for the contamination, perform the required remediation and indemnify us with respect to claims arising out of the contamination. In connection with the separation of Keysight, HP has agreed to transfer that indemnity to Keysight. The determination of the existence and cost of remediation of additional contamination caused by us prior to the separation of Keysight, if any, could involve costly and time-consuming negotiations and litigation. While we expect that HP will meet its remediation and indemnification obligations in this regard, there can be no guarantee that it will do so, in which case Keysight may seek indemnification from us. It is also possible that one or more of the governmental agencies will require us to be named under a remediation order. The naming of Agilent will not affect HP’s obligation to indemnify us or Keysight with regard to these matters. Under our agreement with HP and now HP’s agreement with Keysight, HP will have access

15

Table of Contents            

to those Keysight properties to perform the remediation. HP has agreed to minimize interference with on-site operations at those properties during the course of the remediation, but there can be no guarantee that operations will not be interrupted or that Keysight will not be required to incur unreimbursed costs associated with the remediation. The remediation could also harm on-site operations and the future use and negatively affect the value and future use of the properties. We cannot be sure that Keysight will not seek additional reimbursement from us for that interference or unreimbursed costs. Several of the sites under the initial separation agreement from HP have been sold.

We are liable and are indemnifying HP for any contamination found at all facilities transferred to us by HP excluding the properties undergoing remediation. In addition, we are obligated to indemnify HP for liability associated with past non-compliance with environmental laws regulating ongoing operations, if any, at all properties transferred to us by HP, as well as at sold or discontinued businesses that are related to our businesses. While we are not aware of any material liabilities associated with such indemnified matters, there is no guarantee that such contamination or regulatory non-compliance does not exist, and will not expose us to material liability in the future.

According to the separation agreement, we are liable and are indemnifying Keysight with respect to any liability associated with contamination prior to the separation at properties transferred by us to Keysight. While we are not aware of any material liabilities associated with such indemnified matters, other than the remediation by HP, there is no guarantee that such contamination does not exist, and will not expose us to material liability in the future.

We are being indemnified by HP with respect to all environmental liabilities for which HP accrued a reserve, and we are not aware of any material environmental liabilities assumed by us which are not subject to the indemnity.

As part of our acquisition of Varian in 2010, we assumed the liabilities of Varian, including Varian's costs and potential liabilities for environmental matters. One such cost is our obligation, along with the obligation of Varian Semiconductor Equipment Associates, Inc. ("VSEA") (under the terms of a Distribution Agreement between Varian, VSEA and Varian Medical Systems, Inc. ("VMS")) to each indemnify VMS for one-third of certain costs (after adjusting for any insurance proceeds and tax benefits recognized or realized by VMS for such costs) relating to (a) environmental investigation, monitoring and/or remediation activities at certain facilities previously operated by Varian Associates, Inc. ("VAI") and third-party claims made in connection with environmental conditions at those facilities, and (b) U.S. Environmental Protection Agency or third-party claims alleging that VAI or VMS is a potentially responsible party under the Comprehensive Environmental Response Compensation and Liability Act of 1980, as amended ("CERCLA") in connection with certain sites to which VAI allegedly shipped manufacturing waste for recycling, treatment or disposal (the "CERCLA sites"). With respect to the facilities formerly operated by VAI, VMS is overseeing the environmental investigation, monitoring and/or remediation activities, in most cases under the direction of, or in consultation with, federal, state and/or local agencies, and handling third-party claims. VMS is also handling claims relating to the CERCLA sites. Although any ultimate liability arising from environmental- related matters could result in significant expenditures that, if aggregated and assumed to occur within a single fiscal year, could be material to our financial statements, the likelihood of such occurrence is considered remote. Based on information currently available and our best assessment of the ultimate amount and timing of environmental-related events, management believes that the costs of environmental-related matters are unlikely to have a material adverse effect on our financial condition or results of operations.

We maintain a comprehensive Environmental Site Liability insurance policy which may cover certain clean-up costs or legal claims related to environmental contamination. This policy covers specified active, inactive and divested locations.

International Operations

Our net revenue originating outside the U.S., as a percentage of our total net revenue, was approximately 70 percent in fiscal 2014, 70 percent in fiscal 2013, and 68 percent in fiscal 2012, the majority of which was from customers other than foreign governments. Annual revenues derived from China were approximately 16 percent in fiscal 2014, 17 percent in fiscal 2013 and 16 percent in fiscal 2012. Approximately 9 percent of our revenue in fiscal 2014, 9 percent in fiscal 2013 and 10 percent in fiscal 2012 was derived from Japan. Revenues from external customers are generally attributed to countries based upon the location of the Agilent sales representative.

Long-lived assets located outside of the U.S., as a percentage of our total long-lived assets, was approximately 58 percent in fiscal year 2014, 58 percent in fiscal year 2013 and 60 percent in fiscal year 2012. Approximately 13, 13 and 12 percent of our long-lived assets were located in Japan in fiscal years 2014, 2013 and 2012, respectively.

Most of our sales in international markets are made by foreign sales subsidiaries. In countries with low sales volumes, sales are made through various representatives and distributors. However, we also sell into international markets directly from the U.S.


16

Table of Contents            

Our international business is subject to risks customarily encountered in foreign operations, including interruption to transportation flows for delivery of parts to us and finished goods to our customers, changes in a specific country's or region's political or economic conditions, trade protection measures, import or export licensing requirements, consequences from changes in tax laws and regulatory requirements, difficulty in staffing and managing widespread operations, differing labor regulations, differing protection of intellectual property and geopolitical turmoil, including terrorism and war. We are also exposed to foreign currency exchange rate risk inherent in our sales commitments, anticipated sales and expenses, and assets and liabilities denominated in currencies other than the local functional currency, and may also become subject to interest rate risk inherent in any debt we incur, or investment portfolios we hold. There may be an increased risk of political unrest in regions where we have significant manufacturing operations such as Southeast Asia. However, we believe that our international diversification provides stability to our worldwide operations and reduces the impact on us of adverse economic changes in any single country. Financial information about our international operations is contained in Note 21, "Segment Information", to our consolidated financial statements.

Acquisition and Disposal of Material Assets

On September 19, 2013, Agilent announced plans to separate into two publicly traded companies, one comprising of the life sciences, diagnostics and chemical analysis businesses that will retain the Agilent name, and the other one that will be comprised of the electronic measurement business that will be renamed Keysight Technologies, Inc. (“Keysight”). Keysight was incorporated in Delaware as a wholly-owned subsidiary of Agilent on December 6, 2013. On November 1, 2014, we completed the distribution of 100% of the outstanding common shares of Keysight to Agilent stockholders who received one share of Keysight common stock for every two shares of Agilent held as of the close of business on the record date, October 22, 2014.

In the fourth quarter of 2014, Agilent announced that it is exiting its Nuclear Magnetic Resonance business ("NMR"). Agilent will stop taking new NMR system orders, but the company will continue to meet customer commitments for orders in progress and for ongoing support contracts and continue to provide service on all installed NMR systems. The company expects that this decision will eliminate about 300 jobs, mostly within the next 12 months.

On June 21, 2012, we acquired Dako through the purchase of 100% of the share capital of Dako, a limited liability company incorporated under the laws of Denmark, under the share purchase agreement, dated May 16, 2012. Dako provides antibodies, reagents, scientific instruments and software primarily to customers in pathology laboratories. As a result of the acquisition, Dako has become a wholly-owned subsidiary of Agilent. The consideration paid was approximately $2.143 billion, of which $1.4 billion was paid directly to the seller and $743 million was paid to satisfy the outstanding debt of Dako. Agilent funded the acquisition using our existing cash.

Executive Officers of the Registrant
The names of our current executive officers and their ages, titles and biographies appear below:
Henrik Ancher-Jensen, 49, has served as Senior Vice President, Agilent and President, Order Fulfillment since September 2013.  From September 2012 to September 2013, Mr. Ancher-Jensen served as our Vice President, Global Product Supply, Diagnostics and Genomics Group.  From September 2010 to September 2012 he served as Corporate Vice President, Global Operations of Dako A/S, a Danish diagnostics company, and as Dako’s Vice President, Supply Chain and Chief Information Officer from 2006 to September 2010.  Prior to joining Dako, he spent more than 15 years in senior management roles and management consulting with Chr. Hansen, Deloitte Consulting and NVE.
Mark Doak, 59, has served as our Senior Vice President, Agilent and President, Agilent CrossLab Group since November 2014.  From September 2014 to November 2014 he served as our Senior Vice President, Agilent and President, Life Sciences & Applied Markets.  From August 2008 to September 2014, Mr. Doak served as our Senior Vice President, Agilent and General Manager of the Services and Support Division.  Prior to that, he held several senior management positions across functions in marketing, quality and services.
Solange Glaize, 50, has served as our Vice President, Corporate Controllership and Chief Accounting Officer since March, 2012. From June 2011 to March 2012, Ms. Glaize served as our Vice President of Finance and Business Development, Group CFO, Life Sciences Group and from September 2009 to June 2011 as Vice President of Finance, Group CFO, Life Sciences Group.  From May 2005 to November 2009, she served as Senior Director of Finance, Life Sciences Solution Unit. Ms. Glaize has previously served in various capacities for Agilent, including as Director of Finance, Worldwide Order Fulfillment, Director of Sales Finance and Administration, Semiconductor Products Group and as Managing Director, European Financial Services.  Prior to joining Agilent, Ms. Glaize held a variety of positions in finance with Hewlett-Packard Company.

17

Table of Contents            

Dominique P. Grau 55, has served as our Senior Vice President, Human Resources since August 2014. From May 2012 to August 2014 Mr. Grau served as Vice President, Worldwide Human Resources. Prior to that, he served as Vice President, Compensation, Benefits and HR Services from May 2006 to May 2012. Mr. Grau had previously served in various capacities for Agilent and Hewlett-Packard Company.
Didier Hirsch, 63, has served as our Senior Vice President and Chief Financial Officer since July 2010 and served as interim Chief Financial Officer from April 2010 to July 2010. Prior to that he served as Vice President, Corporate Controllership and Tax from November 2006 to July 2010 and as Chief Accounting Officer from November 2007 to July 2010. From April 2003 to October 2006, Mr. Hirsch served as Vice President and Controller. Prior to assuming this position, Mr. Hirsch served as Vice President and Treasurer from September 1999 to April 2003. Mr. Hirsch had joined Hewlett‑Packard Company in 1989 as Director of Finance and Administration of Hewlett‑Packard France. In 1993, he became Director of Finance and Administration of Hewlett‑ Packard Asia Pacific, and in 1996 Director of Finance and Administration of Hewlett‑Packard Europe, Middle East, and Africa. Mr. Hirsch serves on the Board of Directors of Logitech International, International Rectifier Corporation and Knowles Corporation.
Marie Oh Huber, 53, has served as Senior Vice President, General Counsel and Secretary since September 2009 and serves as an officer or director for a variety of Agilent subsidiaries. She served as our Vice President, Deputy General Counsel and Assistant Secretary from June 2007 to September 2009 and as our Vice President, Assistant General Counsel and Assistant Secretary from July 2002 to June 2007. Ms. Huber had previously served in various capacities for Agilent and Hewlett-Packard Company. She is also a director of the James Campbell Company LLC and the American Leadership Forum - Silicon Valley.
Patrick K. Kaltenbach, 51, has served as Senior Vice President, Agilent and President, Life Sciences and Applied Markets Group since November 2014.  From January 2014 to November 2014 he served as Vice President and General Manager of the Life Sciences Products and Solutions organization. Prior to that he served as Vice President and General Manager of the Liquid Phase Division from December 2012 to January 2014. From July 2010 to December 2012 he served as Vice President and General Manager of the Liquid Phase Separations Business. Prior to that he served as General Manager of the Liquid Chromatography Business from February 2008 to July 2010. Mr. Kaltenbach has held various positions in R&D management and senior management beginning at Hewlett-Packard Co.
Michael R. McMullen, 53, has served as President and Chief Operating Officer since September 2014. Prior to that, he served as Senior Vice President, Agilent and President, Chemical Analysis Group from September 2009 to September 2014. From January 2002 to September 2009, he served as our Vice President and General Manager of the Chemical Analysis Solutions Unit of the Life Sciences and Chemical Analysis Group. Prior to assuming this position, from March 1999 to December 2001, Mr. McMullen served as Country Manager for Agilent's China, Japan and Korea Life Sciences and Chemical Analysis Group. Prior to this position, Mr. McMullen served as our Controller for the Hewlett‑Packard Company and Yokogawa Electric Joint Venture from July 1996 to March 1999.
William P. Sullivan, 64, has served as Agilent’s Chief Executive Officer since March 2005 and served as President from September 2013 to September 2014. He previously served as President from March 2005 to November 2012. Before being named as Agilent’s Chief Executive Officer, Mr. Sullivan served as Executive Vice President and Chief Operating Officer from March 2002 to March 2005. In that capacity, he shared the responsibilities of the president’s office with Agilent’s former President and Chief Executive Officer, Edward W. Barnholt. Mr. Sullivan also had overall responsibility for Agilent’s Electronic Products and Solutions Group, the company’s largest business group. Prior to assuming that position, Mr. Sullivan served as our Senior Vice President, Semiconductor Products Group, from August 1999 to March 2002. Before that, Mr. Sullivan held various management positions at Hewlett-Packard Company. Mr. Sullivan serves on the Board of the Children's Discovery Museum in San Jose, California.

Jacob Thaysen, 39, has served as Senior Vice President, Agilent and President, Diagnostics and Genomics Group since November 2014.  From October 2013 to November 2014 he served as Vice President and General Manager of the Diagnostics and Genomics business. Prior to that he served as Vice President and General Manager of the Genomics Solutions unit from January 2013 to October 2013. Before joining Agilent, he was Corporate Vice President of R&D at Dako A/S, a Danish diagnostics company from April 2011 to January 2013. His previous positions at Dako include Vice President, System Development, R&D from March 2010 to April 2011, Vice President, Strategic Marketing from April 2009 to March 2010 and Vice President, Global Sales Operations from August 2008 to March 2009. Prior to Dako, Mr. Thaysen worked as a management consultant and Chief Technical Officer and founder of a hi-tech start-up company.

Investor Information
We are subject to the informational requirements of the Securities Exchange Act of 1934 (“Exchange Act”). Therefore, we file periodic reports, proxy statements and other information with the Securities and Exchange Commission (“SEC”). Such reports,

18

Table of Contents            

proxy statements and other information may be read and copied by visiting the Public Reference Room of the SEC at 100 F Street N.E., Washington, D.C. 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains an Internet site (http://www.sec.gov) that contains reports, proxy and information statements and other information regarding issuers that file electronically.
You can access financial and other information at our Investor Relations website. The address is www.investor.agilent.com. We make available, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC.
Our Amended and Restated Corporate Governance Standards, the charters of our Audit and Finance Committee, our Compensation Committee, our Executive Committee and our Nominating/Corporate Governance Committee, as well as our Standards of Business Conduct (including code of ethics provisions that apply to our principal executive officer, principal financial officer, principal accounting officer and senior financial officers) are available on our website at www.investor.agilent.com under “Corporate Governance”. These items are also available in print to any stockholder in the United States and Canada who requests them by calling (877) 942-4200. This information is also available by writing to the company at the address on the cover of this Annual Report on Form 10-K.

ITEM 1A.  RISK FACTORS
 
  Risks, Uncertainties and Other Factors That May Affect Future Results

Our operating results and financial condition could be harmed if the markets into which we sell our products decline or do not grow as anticipated.

Visibility into our markets is limited. Our quarterly sales and operating results are highly dependent on the volume and timing of orders received during the fiscal quarter, which are difficult to forecast and may be cancelled by our customers. In addition, our revenues and earnings forecasts for future fiscal quarters are often based on the expected seasonality of our markets. However, the markets we serve do not always experience the seasonality that we expect. Any decline in our customers' markets or in general economic conditions would likely result in a reduction in demand for our products and services. Also, if our customers' markets decline, we may not be able to collect on outstanding amounts due to us. Such declines could harm our consolidated financial position, results of operations, cash flows and stock price, and could limit our profitability. Also, in such an environment, pricing pressures could intensify. Since a significant portion of our operating expenses is relatively fixed in nature due to sales, research and development and manufacturing costs, if we were unable to respond quickly enough these pricing pressures could further reduce our operating margins.

If we do not introduce successful new products and services in a timely manner to address increased competition through frequent new product and service introductions, rapid technological changes and changing industry standards, our products and services will become obsolete, and our operating results will suffer.

We generally sell our products in industries that are characterized by increased competition through frequent new product and service introductions, rapid technological changes and changing industry standards. In addition, many of the markets in which we operate are seasonal. Without the timely introduction of new products, services and enhancements, our products and services will become technologically obsolete over time, in which case our revenue and operating results would suffer. The success of our new products and services will depend on several factors, including our ability to:

properly identify customer needs;
innovate and develop new technologies, services and applications;
successfully commercialize new technologies in a timely manner;
manufacture and deliver our products in sufficient volumes and on time;
differentiate our offerings from our competitors' offerings;
price our products competitively;
anticipate our competitors' development of new products, services or technological innovations; and
control product quality in our manufacturing process.

Uncertain general economic conditions may adversely affect our operating results and financial condition.

Our business is sensitive to negative changes in general economic conditions, both inside and outside the U.S. Slower global economic growth and uncertainty in the markets in which we operate may adversely impact our business resulting in:

19

Table of Contents            


reduced demand for our products, delays in the shipment of orders, or increases in order cancellations;
increased risk of excess and obsolete inventories;
increased price pressure for our products and services; and
greater risk of impairment to the value, and a detriment to the liquidity, of our investment portfolio.

Failure to adjust our purchases due to changing market conditions or failure to estimate our customers' demand could adversely affect our income.

Our income could be harmed if we are unable to adjust our purchases to reflect market fluctuations, including those caused by the seasonal nature of the markets in which we operate. The sale of our products and services are dependent, to a large degree, on customers whose industries are subject to seasonal trends in the demand for their products. During a market upturn, we may not be able to purchase sufficient supplies or components to meet increasing product demand, which could materially affect our results. In the past we have seen a shortage of parts for some of our products. In addition, some of the parts that require custom design are not readily available from alternate suppliers due to their unique design or the length of time necessary for design work. Should a supplier cease manufacturing such a component, we would be forced to reengineer our product. In addition to discontinuing parts, suppliers may also extend lead times, limit supplies or increase prices due to capacity constraints or other factors. In order to secure components for the production of products, we may continue to enter into non-cancelable purchase commitments with vendors, or at times make advance payments to suppliers, which could impact our ability to adjust our inventory to declining market demands. Prior commitments of this type have resulted in an excess of parts when demand for our communications and electronics products has decreased. If demand for our products is less than we expect, we may experience additional excess and obsolete inventories and be forced to incur additional charges.

Demand for some of our products and services depends on capital spending policies of our customers, research and development budgets and on government funding policies.

Our customers include pharmaceutical companies, laboratories, universities, healthcare providers, government agencies and public and private research institutions. Fluctuations in the research and development budgets at these organizations could have a significant effect on the demand for our products and services. Many factors, including public policy spending priorities, available resources, mergers and consolidation, spending priorities, institutional and governmental budgetary policies and product and economic cycles, have a significant effect on the capital spending policies of these entities. Research and development budgets fluctuate due to changes in available resources, consolidation, spending priorities, general economic conditions and institutional and governmental budgetary policies. The timing and amount of revenues from customers that rely on government funding or research may vary significantly due to factors that can be difficult to forecast. These policies in turn can have a significant effect on the demand for our products and services. If demand for our products and services is adversely affected, our revenue and operating results would suffer.

Economic, political and other risks associated with international sales and operations could adversely affect our results of operations.

Because we sell our products worldwide, our business is subject to risks associated with doing business internationally. We anticipate that revenue from international operations will continue to represent a majority of our total revenue. In addition, many of our employees, contract manufacturers, suppliers, job functions and manufacturing facilities are located outside the U.S. Accordingly, our future results could be harmed by a variety of factors, including:

interruption to transportation flows for delivery of parts to us and finished goods to our customers;
changes in foreign currency exchange rates;
changes in a specific country's or region's political, economic or other conditions;
trade protection measures and import or export licensing requirements;
negative consequences from changes in tax laws including changes to U.S. tax legislation that could materially increase our effective tax rate;
difficulty in staffing and managing widespread operations;
differing labor regulations;
differing protection of intellectual property;
unexpected changes in regulatory requirements; and
geopolitical turmoil, including terrorism and war.


20

Table of Contents            

We centralized most of our accounting processes to two locations: India and Malaysia. These processes include general accounting, cost accounting, accounts payable and accounts receivables functions. If conditions change in those countries, it may adversely affect operations, including impairing our ability to pay our suppliers and collect our receivables. Our results of operations, as well as our liquidity, may be adversely affected and possible delays may occur in reporting financial results.

Additionally, we must comply with complex foreign and U.S. laws and regulations, such as the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act, and other local laws prohibiting corrupt payments to governmental officials, and anti-competition regulations. Violations of these laws and regulations could result in fines and penalties, criminal sanctions, restrictions on our business conduct and on our ability to offer our products in one or more countries, and could also materially affect our brand, our ability to attract and retain employees, our international operations, our business and our operating results. Although we have implemented policies and procedures designed to ensure compliance with these laws and regulations, there can be no assurance that our employees, contractors, or agents will not violate our policies.

In addition, although the majority of our products are priced and paid for in U.S. dollars, a significant amount of certain types of expenses, such as payroll, utilities, tax, and marketing expenses, are paid in local currencies. Our hedging programs reduce, but do not always entirely eliminate, within any given twelve month period, the impact of currency exchange rate movements, and therefore fluctuations in exchange rates, including those caused by currency controls, could impact our business operating results and financial condition by resulting in lower revenue or increased expenses. However, for expenses beyond that twelve month period, our hedging strategy does not mitigate our exposure. In addition, our currency hedging programs involve third party financial institutions as counterparties. The weakening or failure of financial institution counterparties may adversely affect our hedging programs and our financial condition through, among other things, a reduction in available counterparties, increasingly unfavorable terms, and the failure of the counterparties to perform under hedging contracts.

Our business will suffer if we are not able to retain and hire key personnel.

Our future success depends partly on the continued service of our key research, engineering, sales, marketing, manufacturing, executive and administrative personnel. If we fail to retain and hire a sufficient number of these personnel, we will not be able to maintain or expand our business. The markets in which we operate are very dynamic, and our businesses continue to respond with reorganizations, workforce reductions and site closures. We believe our pay levels are very competitive within the regions that we operate. However, there is an intense competition for certain highly technical specialties in geographic areas where we continue to recruit, and it may become more difficult to retain our key employees, especially in light of our ongoing restructuring efforts.

Our acquisitions, strategic alliances, joint ventures and divestitures may result in financial results that are different than expected.

In the normal course of business, we frequently engage in discussions with third parties relating to possible acquisitions, strategic alliances, joint ventures and divestitures, and generally expect to complete several transactions per year. For example in the past we completed various acquisitions, including Dako A/S. As a result of such transactions, our financial results may differ from our own or the investment community's expectations in a given fiscal quarter, or over the long term. Such transactions often have post-closing arrangements including but not limited to post-closing adjustments, transition services, escrows or indemnifications, the financial results of which can be difficult to predict. In addition, acquisitions and strategic alliances may require us to integrate a different company culture, management team and business infrastructure. We may have difficulty developing, manufacturing and marketing the products of a newly acquired company in a way that enhances the performance of our combined businesses or product lines to realize the value from expected synergies. Depending on the size and complexity of an acquisition, our successful integration of the entity depends on a variety of factors, including:

the retention of key employees;
the management of facilities and employees in different geographic areas;
the retention of key customers;
the compatibility of our sales programs and facilities with those of the acquired company; and
the compatibility of our existing infrastructure with that of an acquired company.

In addition, effective internal controls are necessary for us to provide reliable and accurate financial reports and to effectively prevent fraud. The integration of acquired businesses is likely to result in our systems and controls becoming increasingly complex and more difficult to manage. We devote significant resources and time to comply with the internal control over financial reporting requirements of the Sarbanes-Oxley Act of 2002. However, we cannot be certain that these measures will ensure that we design, implement and maintain adequate control over our financial processes and reporting in the future, especially in the context of acquisitions of other businesses. Any difficulties in the assimilation of acquired businesses into our control system could harm our operating results or cause us to fail to meet our financial reporting obligations. Inferior internal controls could also cause

21

Table of Contents            

investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock and our access to capital.

A successful divestiture depends on various factors, including our ability to:

effectively transfer liabilities, contracts, facilities and employees to the purchaser;
identify and separate the intellectual property to be divested from the intellectual property that we wish to keep; and
reduce fixed costs previously associated with the divested assets or business.

In addition, if customers of the divested business do not receive the same level of service from the new owners, this may adversely affect our other businesses to the extent that these customers also purchase other Agilent products. All of these efforts require varying levels of management resources, which may divert our attention from other business operations. Further, if market conditions or other factors lead us to change our strategic direction, we may not realize the expected value from such transactions. If we do not realize the expected benefits or synergies of such transactions, our consolidated financial position, results of operations, cash flows and stock price could be negatively impacted.

Integrating Dako A/S may be more difficult, costly or time consuming than expected and our business and financial condition may be materially impaired.

We may not achieve the desired benefits from our acquisition and integration of Dako. In addition, the operation of Dako within Agilent could be a difficult, costly and time-consuming process that involves a number of risks, including, but not limited to:
 
difficulties in the assimilation of different corporate cultures, practices and sales and distribution methodologies, as well as in the assimilation and retention of geographically dispersed, decentralized operations and personnel;
increased exposure to certain governmental regulations and compliance requirements; and
the use of cash resources and increased capital expenditures on additional investment or research and development activities in excess of our current expectations, which could offset any synergies resulting from the Dako acquisition and limit other potential uses of our cash, including stock repurchases and retirement of outstanding debt.
 
Even if we are able to successfully operate Dako within Agilent, we may not be able to realize the revenue and other synergies and growth that we anticipate from the acquisition in the time frame that we currently expect, and the costs of achieving these benefits may be higher than what we currently expect. As a result, the Dako acquisition and integration may not contribute to our earnings as expected, we may not achieve expected revenue synergies or our return on invested capital targets when expected, or at all, and we may not achieve the other anticipated strategic and financial benefits of this transaction.

Our customers and we are subject to various governmental regulations, compliance with or changes in such regulations may cause us to incur significant expenses, and if we fail to maintain satisfactory compliance with certain regulations, we may be forced to recall products and cease their manufacture and distribution, and we could be subject to civil or criminal penalties.

Our customers and we are subject to various significant international, federal, state and local regulations, including but not limited to health and safety, packaging, product content, labor and import/export regulations. These regulations are complex, change frequently and have tended to become more stringent over time. We may be required to incur significant expenses to comply with these regulations or to remedy violations of these regulations. Any failure by us to comply with applicable government regulations could also result in cessation of our operations or portions of our operations, product recalls or impositions of fines and restrictions on our ability to carry on or expand our operations. In addition, because many of our products are regulated or sold into regulated industries, we must comply with additional regulations in marketing our products. We develop, configure and market our products to meet customer needs created by these regulations. Any significant change in these regulations could reduce demand for our products, force us to modify our products to comply with new regulations or increase our costs of producing these products. If demand for our products is adversely affected or our costs increase, our business would suffer.

Our products and operations are also often subject to the rules of industrial standards bodies, like the International Standards Organization, as well as regulation by other agencies such as the United States Food and Drug Administration (“FDA”). We also must comply with work safety rules. If we fail to adequately address any of these regulations, our businesses could be harmed.


22

Table of Contents            

We are subject to extensive regulation by the FDA and certain similar foreign regulatory agencies, and failure to comply with such regulations could harm our reputation, business, financial condition and results of operations.

A number of our products from our chemical analysis and life sciences and diagnostics businesses are subject to regulation by the FDA and certain similar foreign regulatory agencies. In addition, a number of our products may be in the future subject to regulation by the FDA and certain similar foreign regulatory agencies. These regulations govern a wide variety of product related activities, from quality management, design and development to labeling, manufacturing, promotion, sales and distribution. If we or any of our suppliers or distributors fail to comply with FDA and other applicable regulatory requirements or are perceived to potentially have failed to comply, we may face, among other things, warning letters, adverse publicity affecting both us and our customers; investigations or notices of non-compliance, fines, injunctions, and civil penalties; import or export restrictions; partial suspensions or total shutdown of production facilities or the imposition of operating restrictions; increased difficulty in obtaining required FDA clearances or approvals or foreign equivalents; seizures or recalls of our products or those of our customers; or the inability to sell our products. Any such FDA actions could disrupt our business and operations, lead to significant remedial costs and have a material adverse impact on our financial position and results of operations.

In August 2013, Dako Denmark A/S received a warning letter from the FDA relating to its quality management processes at our Glostrup facility. Although we are committed to addressing the issues raised by the FDA, there can be no assurance that the FDA will be satisfied with the steps we have taken to address the issues or that the FDA will not raise additional areas of concern. We may be subject to additional regulatory action by the FDA, including import bans, seizures, injunction and/or civil penalties and any such actions could have an adverse impact on our business, financial position and results of operations.

Some of our chemical analysis and life sciences and diagnostics products are exposed to particular complex regulations such as regulations of toxic substances and failure to comply with such regulations could harm our business.

Some of our chemical analysis products and related consumables marketed by our chemical analysis and life sciences and diagnostics businesses are used in conjunction with chemicals whose manufacture, processing, distribution and notification requirements are regulated by the U.S. Environmental Protection Agency (“EPA”) under the Toxic Substances Control Act, and by regulatory bodies in other countries with similar laws. The Toxic Substances Control Act regulations govern, among other things, the testing, manufacture, processing and distribution of chemicals, the testing of regulated chemicals for their effects on human health and safety and import and export of chemicals. The Toxic Substances Control Act prohibits persons from manufacturing any chemical in the U.S. that has not been reviewed by EPA for its effect on health and safety, and placed on an EPA inventory of chemical substances. We must ensure conformance of the manufacturing, processing, distribution of and notification about these chemicals to these laws and adapt to regulatory requirements in all applicable countries as these requirements change. If we fail to comply with the notification, record-keeping and other requirements in the manufacture or distribution of our products, then we could be made to pay civil penalties, face criminal prosecution and, in some cases, be prohibited from distributing or marketing our products until the products or component substances are brought into compliance.

Our business may suffer if we fail to comply with government contracting laws and regulations.

We derive a portion of our revenues from direct and indirect sales to U.S., state, local, and foreign governments and their respective agencies. Such contracts are subject to various procurement laws and regulations, and contract provisions relating to their formation, administration and performance. Failure to comply with these laws, regulations or provisions in our government contracts could result in the imposition of various civil and criminal penalties, termination of contracts, forfeiture of profits, suspension of payments, or suspension from future government contracting. If our government contracts are terminated, if we are suspended from government work, or if our ability to compete for new contracts is adversely affected, our business could suffer.

Our retirement and post retirement pension plans are subject to financial market risks that could adversely affect our future results of operations and cash flows.

We have significant retirement and post retirement pension plans assets and obligations. The performance of the financial markets and interest rates impact our plan expenses and funding obligations. Significant decreases in market interest rates, decreases in the fair value of plan assets and investment losses on plan assets will increase our funding obligations, and adversely impact our results of operations and cash flows.

The impact of consolidation and acquisitions of competitors is difficult to predict and may harm our business.
 
The life sciences industry is intensely competitive and has been subject to increasing consolidation. Consolidation in our industries could result in existing competitors increasing their market share through business combinations and result in stronger

23

Table of Contents            

competitors, which could have a material adverse effect on our business, financial condition and results of operations. We may not be able to compete successfully in increasingly consolidated industries and cannot predict with certainty how industry consolidation will affect our competitors or us.

If we are unable to successfully manage the consolidation and streamlining of our manufacturing operations, we may not achieve desired efficiencies and our ability to deliver products to our customers could be disrupted.
 
Although we utilize manufacturing facilities throughout the world, we have been consolidating, and may continue to consolidate, our manufacturing operations to certain of our plants to achieve efficiencies and gross margin improvements. Additionally, we typically consolidate the production of products from our acquisitions into our supply chain and manufacturing processes, which are technically complex and require expertise to operate. If we are unable to establish processes to efficiently and effectively produce high quality products in the consolidated locations, we may not achieve the anticipated synergies and production may be disrupted, which could adversely affect our business and operating results.

Our operating results may suffer if our manufacturing capacity does not match the demand for our products.

Because we cannot immediately adapt our production capacity and related cost structures to rapidly changing market conditions, when demand does not meet our expectations, our manufacturing capacity will likely exceed our production requirements. If, during a general market upturn or an upturn in one of our segments, we cannot increase our manufacturing capacity to meet product demand, we will not be able to fulfill orders in a timely manner which could lead to order cancellations, contract breaches or indemnification obligations. This inability could materially and adversely limit our ability to improve our results. By contrast, if during an economic downturn we had excess manufacturing capacity, then our fixed costs associated with excess manufacturing capacity would adversely affect our income, margins, and operating results.

Dependence on contract manufacturing and outsourcing other portions of our supply chain may adversely affect our ability to bring products to market and damage our reputation. Dependence on outsourced information technology and other administrative functions may impair our ability to operate effectively.

As part of our efforts to streamline operations and to cut costs, we outsource aspects of our manufacturing processes and other functions and continue to evaluate additional outsourcing. If our contract manufacturers or other outsourcers fail to perform their obligations in a timely manner or at satisfactory quality levels, our ability to bring products to market and our reputation could suffer. For example, during a market upturn, our contract manufacturers may be unable to meet our demand requirements, which may preclude us from fulfilling our customers' orders on a timely basis. The ability of these manufacturers to perform is largely outside of our control. Additionally, changing or replacing our contract manufacturers or other outsourcers could cause disruptions or delays. In addition, we outsource significant portions of our information technology ("IT") and other administrative functions. Since IT is critical to our operations, any failure to perform on the part of our IT providers could impair our ability to operate effectively. In addition to the risks outlined above, problems with manufacturing or IT outsourcing could result in lower revenues, unexecuted efficiencies, and impact our results of operations and our stock price. Much of our outsourcing takes place in developing countries and, as a result, may be subject to geopolitical uncertainty.

Environmental contamination from past operations could subject us to unreimbursed costs and could harm on-site operations and the future use and value of the properties involved and environmental contamination caused by ongoing operations could subject us to substantial liabilities in the future.

Certain properties transferred to Keysight as part of the separation are undergoing remediation by the Hewlett-Packard Company ("HP") for subsurface contaminations that were known at the time of our separation from HP. HP has agreed to retain the liability for this subsurface contamination, perform the required remediation and indemnify Keysight with respect to claims arising out of that contamination. HP will have access to those Keysight properties to perform remediation. While HP has agreed to minimize interference with on-site operations at those properties, remediation activities and subsurface contamination may require Keysight to incur unreimbursed costs and could harm on-site operations and the future use and value of the properties. We cannot be sure that Keysight will not seek additional reimbursement from us for that interference or unreimbursed costs. We cannot be sure that HP will continue to fulfill its indemnification or remediation obligations, in which case Keysight may seek indemnification from us. In addition, the determination of the existence and cost of any additional contamination caused by us prior to the separation could involve costly and time-consuming negotiations and litigation.

Other than those properties currently undergoing remediation by HP, we have agreed to indemnify HP, with respect to any liability associated with contamination from past operations, and Keysight, with respect to any liability associated with contamination prior to the separation, at , respectively, properties transferred from HP to us and properties transferred by us to Keysight. While we are not aware of any material liabilities associated with any potential subsurface contamination at any of

24

Table of Contents            

those properties, subsurface contamination may exist, and we may be exposed to material liability as a result of the existence of that contamination.

Our current and historical manufacturing processes involve, or have involved, the use of substances regulated under various international, federal, state and local laws governing the environment. As a result, we may become subject to liabilities for environmental contamination, and these liabilities may be substantial. While we have divested substantially all of our semiconductor related businesses to Avago and Verigy and regardless of indemnification arrangements with those parties, we may still become subject to liabilities for historical environmental contamination related to those businesses. Although our policy is to apply strict standards for environmental protection at our sites inside and outside the U.S., even if the sites outside the U.S. are not subject to regulations imposed by foreign governments, we may not be aware of all conditions that could subject us to liability.

As part of our acquisition of Varian, we assumed the liabilities of Varian, including Varian's costs and potential liabilities for environmental matters. One such cost is our obligation, along with the obligation of Varian Semiconductor Equipment Associates, Inc. ("VSEA") (under the terms of a Distribution Agreement between Varian, VSEA and Varian Medical Systems, Inc. ("VMS")) to each indemnify VMS for one-third of certain costs (after adjusting for any insurance proceeds and tax benefits recognized or realized by VMS for such costs) relating to (a) environmental investigation, monitoring and/or remediation activities at certain facilities previously operated by Varian Associates, Inc. ("VAI") and third-party claims made in connection with environmental conditions at those facilities, and (b) U.S. Environmental Protection Agency or third-party claims alleging that VAI or VMS is a potentially responsible party under the Comprehensive Environmental Response Compensation and Liability Act of 1980, as amended ("CERCLA") in connection with certain sites to which VAI allegedly shipped manufacturing waste for recycling, treatment or disposal (the "CERCLA sites"). With respect to the facilities formerly operated by VAI, VMS is overseeing the environmental investigation, monitoring and/or remediation activities, in most cases under the direction of, or in consultation with, federal, state and/or local agencies, and handling third-party claims. VMS is also handling claims relating to the CERCLA sites. Although any ultimate liability arising from environmental- related matters could result in significant expenditures that, if aggregated and assumed to occur within a single fiscal year, could be material to our financial statements, the likelihood of such occurrence is considered remote. Based on information currently available and our best assessment of the ultimate amount and timing of environmental-related events, management believes that the costs of environmental-related matters are unlikely to have a material adverse effect on our financial condition or results of operations.

New regulations related to “conflict minerals” may cause us to incur additional expenses and could limit the supply and increase the cost of certain metals used in manufacturing our products.

In August 2012, the SEC adopted a new rule requiring disclosures by public companies of specified minerals, known as conflict minerals, that are necessary to the functionality or production of products manufactured or contracted to be manufactured. The new rule, which went into effect for calendar year 2013 and requires an annual disclosure report to be filed with the SEC by May 31st, requires companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo or an adjoining country. While we filed our initial report for calendar year 2013, there are costs associated with complying with these disclosure requirements, including for diligence in regards to the sources of any conflict minerals used in our products, in addition to the cost of remediation and other changes to products, processes, or sources of supply as a consequence of such verification activities. In addition, our ongoing implementation of these rules could adversely affect the sourcing, supply, and pricing of materials used in our products. The new rule could affect sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of our products, including tin, gold and tungsten. The number of suppliers who provide conflict-free minerals may be limited. In addition, there may be material costs associated with complying with the disclosure requirements, such as costs related to the due diligence process of determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. As our supply chain is complex and we use contract manufacturers for some of our products, we may not be able to sufficiently verify the origins of the relevant minerals used in our products through the due diligence procedures that we implement, which may harm our reputation. We may also encounter challenges to satisfy those customers who require that all of the components of our products be certified as conflict-free, which could place us at a competitive disadvantage if we are unable to do so.

Third parties may claim that we are infringing their intellectual property and we could suffer significant litigation or licensing expenses or be prevented from selling products or services.

From time to time, third parties may claim that one or more of our products or services infringe their intellectual property rights. We analyze and take action in response to such claims on a case by case basis. Any dispute or litigation regarding patents or other intellectual property could be costly and time-consuming due to the complexity of our technology and the uncertainty of intellectual property litigation and could divert our management and key personnel from our business operations. A claim of intellectual property infringement could force us to enter into a costly or restrictive license agreement, which might not be available

25

Table of Contents            

under acceptable terms or at all, could require us to redesign our products, which would be costly and time-consuming, and/or could subject us to significant damages or to an injunction against development and sale of certain of our products or services. Our intellectual property portfolio may not be useful in asserting a counterclaim, or negotiating a license, in response to a claim of intellectual property infringement. In certain of our businesses we rely on third party intellectual property licenses and we cannot ensure that these licenses will be available to us in the future on favorable terms or at all.

Third parties may infringe our intellectual property and we may suffer competitive injury or expend significant resources enforcing our rights.

Our success depends in large part on our proprietary technology, including technology we obtained through acquisitions. We rely on various intellectual property rights, including patents, copyrights, trademarks and trade secrets, as well as confidentiality provisions and licensing arrangements, to establish our proprietary rights. If we do not enforce our intellectual property rights successfully our competitive position may suffer which could harm our operating results.

Our pending patent applications, and our pending copyright and trademark registration applications, may not be allowed or competitors may challenge the validity or scope of our patents, copyrights or trademarks. In addition, our patents, copyrights, trademarks and other intellectual property rights may not provide us a significant competitive advantage.

We may need to spend significant resources monitoring our intellectual property rights and we may or may not be able to detect infringement by third parties. Our competitive position may be harmed if we cannot detect infringement and enforce our intellectual property rights quickly or at all. In some circumstances, we may choose to not pursue enforcement because an infringer has a dominant intellectual property position or for other business reasons. In addition, competitors might avoid infringement by designing around our intellectual property rights or by developing non-infringing competing technologies. Intellectual property rights and our ability to enforce them may be unavailable or limited in some countries which could make it easier for competitors to capture market share and could result in lost revenues. Furthermore, some of our intellectual property is licensed to others which allow them to compete with us using that intellectual property.

We are subject to ongoing tax examinations of our tax returns by the Internal Revenue Service and other tax authorities. An adverse outcome of any such audit or examination by the IRS or other tax authority could have a material adverse effect on our results of operations, financial condition and liquidity.

We are subject to ongoing tax examinations of our tax returns by the U.S. Internal Revenue Service and other tax authorities in various jurisdictions. We regularly assess the likelihood of adverse outcomes resulting from ongoing tax examinations to determine the adequacy of our provision for income taxes. These assessments can require considerable estimates and judgments. Intercompany transactions associated with the sale of inventory, services, intellectual property and cost share arrangements are complex and affect our tax liabilities. The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws and regulations in multiple jurisdictions. There can be no assurance that the outcomes from ongoing tax examinations will not have an adverse effect on our operating results and financial condition. A difference in the ultimate resolution of tax uncertainties from what is currently estimated could have an adverse effect on our operating results and financial condition.

If tax incentives change or cease to be in effect, our income taxes could increase significantly.

Agilent benefits from tax incentives extended to its foreign subsidiaries to encourage investment or employment. Several jurisdictions have granted Agilent tax incentives which require renewal at various times in the future. The incentives are conditioned on achieving various thresholds of investments and employment, or specific types of income. Agilent's taxes could increase if the incentives are not renewed upon expiration. If Agilent cannot or does not wish to satisfy all or parts of the tax incentive conditions, we may lose the related tax incentive and could be required to refund tax incentives previously realized. As a result, our effective tax rate could be higher than it would have been had we maintained the benefits of the tax incentives.

We have substantial cash requirements in the United States while most of our cash is generated outside of the United States. The failure to maintain a level of cash sufficient to address our cash requirements in the United States could adversely affect our financial condition and results of operations.

Although the cash generated in the United States from our operations should cover our normal operating requirements and debt service requirements, a substantial amount of additional cash is required for special purposes such as the maturity of our debt obligations, our stock repurchase program, our declared dividends and acquisitions of third parties. Our business operating results, financial condition, and strategic initiatives could be adversely impacted if we were unable to address our U.S. cash requirements through the efficient and timely repatriations of overseas cash or other sources of cash obtained at an acceptable cost.


26

Table of Contents            

We have outstanding debt and may incur other debt in the future, which could adversely affect our financial condition, liquidity and results of operations.
 
We currently have outstanding an aggregate principal amount of $2.7 billion in senior unsecured notes, including $1.1 billion in Keysight senior unsecured notes, and a $42 million secured mortgage. We also are a party to a five-year senior unsecured revolving credit facility which expires in September 2019 and under which we may borrow up to $400 million and a Danish Krone denominated credit facility equivalent to $9 million. We may borrow additional amounts in the future and use the proceeds from any future borrowing for general corporate purposes, other future acquisitions, expansion of our business or repurchases of our outstanding shares of common stock. Keysight is a party to a five-year revolving credit facility which expires in October 2019 for $300 million, initially guaranteed by us. The guarantee was terminated upon the completion of the separation of Keysight on November 1, 2014.

Our incurrence of this debt, and increases in our aggregate levels of debt, may adversely affect our operating results and financial condition by, among other things:
 
increasing our vulnerability to downturns in our business, to competitive pressures and to adverse economic and industry conditions; 
requiring the dedication of an increased portion of our expected cash from operations to service our indebtedness, thereby reducing the amount of expected cash flow available for other purposes, including capital expenditures, acquisitions and stock repurchases; and 
limiting our flexibility in planning for, or reacting to, changes in our business and our industry.
 
Our current revolving credit facility imposes restrictions on us, including restrictions on our ability to create liens on our assets and the ability of our subsidiaries to incur indebtedness, and requires us to maintain compliance with specified financial ratios. Our ability to comply with these ratios may be affected by events beyond our control. In addition, the indenture governing our senior notes contains covenants that may adversely affect our ability to incur certain liens or engage in certain types of sale and leaseback transactions. If we breach any of the covenants and do not obtain a waiver from the lenders, then, subject to applicable cure periods, our outstanding indebtedness could be declared immediately due and payable.

If we suffer a loss to our factories, facilities or distribution system due to catastrophe, our operations could be seriously harmed.

Our factories, facilities and distribution system are subject to catastrophic loss due to fire, flood, terrorism or other natural or man-made disasters. In particular, several of our facilities could be subject to a catastrophic loss caused by earthquake due to their locations. Our production facilities, headquarters and Agilent Technologies Laboratories in California, and our production facilities in Japan, are all located in areas with above-average seismic activity. If any of these facilities were to experience a catastrophic loss, it could disrupt our operations, delay production, shipments and revenue and result in large expenses to repair or replace the facility. If such a disruption were to occur, we could breach agreements, our reputation could be harmed, and our business and operating results could be adversely affected. In addition, since we have consolidated our manufacturing facilities, we are more likely to experience an interruption to our operations in the event of a catastrophe in any one location. Although we carry insurance for property damage and business interruption, we do not carry insurance or financial reserves for interruptions or potential losses arising from earthquakes or terrorism. Also, our third party insurance coverage will vary from time to time in both type and amount depending on availability, cost and our decisions with respect to risk retention. Economic conditions and uncertainties in global markets may adversely affect the cost and other terms upon which we are able to obtain third party insurance. If our third party insurance coverage is adversely affected, or to the extent we have elected to self-insure, we may be at a greater risk that our operations will be harmed by a catastrophic loss.

If we experience a significant disruption in, or breach in security of, our information technology systems, or if we fail to implement new systems and software successfully, our business could be adversely affected.
 
We rely on several centralized information technology systems throughout our company to provide products and services, keep financial records, process orders, manage inventory, process shipments to customers and operate other critical functions. Our information technology systems may be susceptible to damage, disruptions or shutdowns due to power outages, hardware failures, computer viruses, attacks by computer hackers, telecommunication failures, user errors, catastrophes or other unforeseen events. If we were to experience a prolonged system disruption in the information technology systems that involve our interactions with customers or suppliers, it could result in the loss of sales and customers and significant incremental costs, which could adversely affect our business. In addition, security breaches of our information technology systems could result in the misappropriation or unauthorized disclosure of confidential information belonging to us or to our employees, partners, customers or suppliers, which could result in our suffering significant financial or reputational damage.

27

Table of Contents            


Adverse conditions in the global banking industry and credit markets may adversely impact the value of our cash investments or impair our liquidity.

As of October 31 2014, we had cash and cash equivalents of approximately $3.0 billion invested or held in a mix of money market funds, time deposit accounts and bank demand deposit accounts. Disruptions in the financial markets may, in some cases, result in an inability to access assets such as money market funds that traditionally have been viewed as highly liquid. Any failure of our counterparty financial institutions or funds in which we have invested may adversely impact our cash and cash equivalent positions and, in turn, our results and financial condition.

We could incur significant liability if the distribution of Keysight common stock to our shareholders is determined to be a taxable transaction.

We have received an opinion from outside tax counsel to the effect that the separation and distribution of Keysight qualifies as a transaction that is described in Sections 355(a) and 368(a)(1)(D) of the Internal Revenue Code. The opinion relies on certain facts, assumptions, representations and undertakings from Keysight and us regarding the past and future conduct of the companies’ respective businesses and other matters. If any of these facts, assumptions, representations or undertakings are incorrect or not satisfied, our shareholders and we may not be able to rely on the opinion of tax counsel and could be subject to significant tax liabilities. Notwithstanding the opinion of tax counsel we have received, the IRS could determine on audit that the separation is taxable if it determines that any of these facts, assumptions, representations or undertakings are not correct or have been violated or if it disagrees with the conclusions in the opinion. If the separation is determined to be taxable for U.S. federal income tax purposes, our shareholders that are subject to U.S. federal income tax and we could incur significant U.S. federal income tax liabilities.

We may be exposed to claims and liabilities as a result of the separation.

We entered into a separation and distribution agreement and various other agreements with Keysight to govern the separation and the relationship of the two companies going forward. These agreements provide for specific indemnity and liability obligations and could lead to disputes between us. The indemnity rights we have against Keysight under the agreements may not be sufficient to protect us. In addition, our indemnity obligations to Keysight may be significant and these risks could negatively affect our financial condition.

Item 1B.    Unresolved Staff Comments

None.

Item 2. Properties
As of October 31, 2014 we owned or leased a total of approximately 10.6 million square feet of space worldwide. Of that, we owned approximately 7.9 million square feet and leased the remaining 2.7 million square feet. Our sales and support facilities occupied a total of approximately 1.3 million square feet. Our manufacturing plants, R&D facilities and warehouse and administrative facilities occupied approximately 9.3 million square feet. All of our businesses share sales offices throughout the world.

In connection with the separation of Keysight, as of November 1, 2014, we transferred a total of approximately 5.7 million square feet of space worldwide.  Of that, Keysight owned approximately 4.1 million square feet and leased approximately 1.6 million square feet of space. 

Information about each of our businesses appears below:

Life Sciences & Diagnostics Group.  Our life sciences and diagnostics business has manufacturing and R&D facilities in Singapore, Malaysia, Denmark, Germany, Poland, U.K. and the U.S.

Chemical Analysis Group.  Our chemical analysis measurement business has manufacturing and R&D facilities in Australia, China, Malaysia, Italy, Japan, Netherlands, U.K. and the U.S.

Electronic Measurement Group.  Our electronic measurement business has manufacturing and R&D facilities in China, Germany, Japan, Malaysia, Singapore, India and the U.S.


28

Table of Contents            

Item 3. Legal Proceedings
We are involved in lawsuits, claims, investigations and proceedings, including, but not limited to, patent, commercial and environmental matters, which arise in the ordinary course of business. There are no matters pending that we currently believe are reasonably possible of having a material impact to our business, consolidated financial condition, results of operations or cash flows.

On March 4, 2013, we made a report to the Inspector General of the Department of Defense (“DOD IG”) regarding pricing irregularities relating to certain sales of electronic measurement products to U.S. government agencies.  We conducted an investigation with the assistance of outside counsel and approached the DOD IG with a proposed methodology for resolving possible overcharges to U.S. government purchasers resulting from these sales and discussed the matter with the Department of Justice (“DOJ”). On October 31, 2014, the Company resolved the matter with the DOJ with a settlement for an amount that was not material to Agilent's financial condition, results of operations or cash flows.

As part of routine internal audit activities, the Company determined that certain employees of Agilent's subsidiaries in China did not comply with the Company's Standards of Business Conduct and other policies.  Based on those findings, the Company has initiated an internal investigation, with the assistance of outside counsel, relating to certain sales of our products through third party intermediaries in China.  The internal investigation included a review of compliance by our employees in China with the requirements of the U.S. Foreign Corrupt Practices Act and other applicable laws and regulations.  On September 5, 2013, the Company voluntarily contacted the United States Securities and Exchange Commission (“SEC”) and United States Department of Justice (“DOJ”) to advise both agencies of this internal investigation.  On September 15, 2014, the Company received a letter from the SEC’s Division of Enforcement stating that its investigation had been completed and that the Division of Enforcement did not intend to recommend any enforcement action against the Company by the SEC. On September 24, 2014, the Company received a letter from DOJ stating that DOJ had closed its inquiry into the matter, citing the Company’s voluntary disclosure and thorough investigation.

Item 4. Mine Safety Disclosures
Not applicable.

PART II

Item 5. Market for the Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock is listed on the New York Stock Exchange with the ticker symbol “A”. The following table sets forth the high and low sale prices and the dividend declarations per quarter for the 2013 and 2014 fiscal years as reported in the consolidated transaction reporting system for the New York Stock Exchange:

Fiscal 2013
 
High
Low
Dividends
First Quarter (ended January 31, 2013)
$
45.55

$
35.45

$0.22
Second Quarter (ended April 30, 2013)
$
45.66

$
40.19

N/A
Third Quarter (ended July 31, 2013)
$
47.47

$
41.24

$0.12
Fourth Quarter (ended October 31, 2013)
$
53.47

$
45.32

$0.12
 
 
 
 
Fiscal 2014
 
High
Low
Dividends
First Quarter (ended January 31, 2014)
$
61.22

$
49.84

$0.132
Second Quarter (ended April 30, 2014)
$
60.46

$
51.96

$0.132
Third Quarter (ended July 31, 2014)
$
59.58

$
53.66

$0.132
Fourth Quarter (ended October 31, 2014)
$
59.40

$
49.80

$0.132
 
 
 
 
As of December 1, 2014, there were 28,341 common stockholders of record.
During fiscal 2014, we issued four quarterly dividends of $0.132 per share. All decisions regarding the declaration and payment of dividends are at the discretion of our Board of Directors and will be evaluated regularly in light of our financial condition, earnings, growth prospects, funding requirements, applicable law, and any other factors that our Board deems relevant.

29

Table of Contents            

The information required by this item with respect to equity compensation plans is included under the caption Equity Compensation Plans in our proxy statement for the annual meeting of stockholders to be held March 18, 2015, to be filed with the Securities and Exchange Commission pursuant to Regulation 14A, and is incorporated herein by reference.

On November 1, 2014, we completed the distribution of the issued and outstanding common stock of Keysight to our shareholders. Agilent shareholders of records as of the close of business on October 22, 2014, the record date for the distribution, received one share of Keysight common stock for every two shares of Agilent common stock held as of the record date. Agilent shareholders received cash in lieu of any fractional shares of Keysight common stock.

ISSUER PURCHASES OF EQUITY SECURITIES

The table below summarizes information about the company’s purchases, based on trade date; of its equity securities registered pursuant to Section 12 of the Exchange Act during the quarterly period ended October 31, 2014. The total number of shares of common stock purchased by the company during the year ended October 31, 2014 is 3,593,606 shares.
Period
 
Total Number of
Shares of Common
Stock Purchased(1)
 
Weighted Average
Price Paid per Share of
Common Stock(2)
 
Total
Number of
Shares of Common
Stock Purchased as
Part of Publicly
Announced Plans or
Programs(1)
 
Maximum
Approximate Dollar
Value of Shares of
Common Stock that
May Yet Be
Purchased Under the
Plans or Programs
(in millions)
 
 
(a)
 
(b)
 
(c)
 
(d)
Aug. 1, 2014 through
Aug. 31, 2014
 

 
N/A
 

 
N/A
Sep. 1, 2014 through
Sep. 30, 2014
 

 
N/A
 

 
N/A
Oct. 1, 2014 through
Oct. 31, 2014
 

 
N/A
 

 
N/A
Total
 

 
N/A
 

 
 

(1) On January 17, 2013, we announced that our board of directors approved a share repurchase program authorizing the use of up to $500 million to repurchase shares of the Company's common stock in open market transactions, inclusive of any amounts repurchased since November 1, 2012 (the “2013 Repurchase Program”). On May 14, 2013, we announced that our board of directors authorized a $500 million increase to the 2013 Repurchase Program, bringing the cumulative authorization to $1 billion. In November 2013, we completed the 2013 Repurchase Program and on November 22, 2013, we announced that our board of directors had authorized a new share repurchase program. The new program is designed to reduce or eliminate dilution resulting from issuance of stock under the Company's employee equity incentive programs to maintain a weighted average share count of approximately 335 million diluted shares.  The new program does not require the Company to acquire a specific number of shares and may be suspended or discontinued at any time.

(2) The weighted average price paid per share of common stock does not include the cost of commissions.


30

Table of Contents            

Item 6.    Selected Financial Data

SELECTED FINANCIAL DATA
(Unaudited)

 
Years Ended October 31,
 
2014
 
2013
 
2012
 
2011
 
2010
 
(in millions, except per share data)
Consolidated Statement of Operations Data:
 
 
 
 
(2)
 
 
 
(1)
Net revenue
$
6,981

 
$
6,782

 
$
6,858

 
$
6,615

 
$
5,444

Income before taxes
$
646

 
$
859

 
$
1,043

 
$
1,032

 
$
692

Net income
$
504

 
$
724

 
$
1,153

 
$
1,012

 
$
684

Net income per share — Basic:
$
1.51

 
$
2.12

 
$
3.31

 
$
2.92

 
$
1.97

Net income per share — Diluted:
$
1.49

 
$
2.10

 
$
3.27

 
$
2.85

 
$
1.94

Weighted average shares used in computing basic net income per share
333

 
341

 
348

 
347

 
347

Weighted average shares used in computing diluted net income per share
338

 
345

 
353

 
355

 
353

Cash dividends declared per common share
$
0.528

 
$
0.460

 
0.300

 

 


 
 
October 31,
 
2014
 
2013
 
2012
 
2011
 
2010
 
(in millions)
Consolidated Balance Sheet Data:
 
 
 
 
(2)
 
 
 
(1)
Cash and cash equivalents and short-term investments
$
3,028

 
$
2,675

 
$
2,351

 
$
3,527

 
$
2,649

Working capital
$
3,798

 
$
3,381

 
$
2,736

 
$
3,732

 
$
3,086

Total assets
$
10,831

 
$
10,686

 
$
10,536

 
$
9,057

 
$
9,696

Long-term debt
$
2,762

 
$
2,699

 
$
2,112

 
$
1,932

 
$
2,190

Stockholders' equity
$
5,298

 
$
5,286

 
$
5,182

 
$
4,308

 
$
3,228

 
 
 
 
 
 
 
 
 
 
(1) Consolidated financial data includes Varian, acquired on May 14, 2010.
(2) Consolidated financial data includes Dako, acquired on June 21, 2012 and a non-recurring tax benefit relating to the reversal of U.S. valuation allowance of $280 million.
Note: The above consolidated financial data includes Keysight which separated from Agilent on November 1, 2014. Keysight will be presented as a discontinued operation in the first fiscal quarter of 2015.



31

Table of Contents            


Item 7.    Management's Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K. This report contains forward-looking statements including, without limitation, statements regarding trends, seasonality, and growth in, and drivers of, the markets we sell into, backlog, our strategic direction, our future effective tax rate and tax valuation allowance, earnings from our foreign subsidiaries, remediation activities, indemnification, new product and service introductions, the ability of our products to meet market needs, changes to our manufacturing processes, the use of contract manufacturers, sources and supply of materials used in our products, the impact of local government regulations on our ability to pay vendors or conduct operations, our liquidity position, our ability to generate cash from operations, growth in our businesses, our investments, the potential impact of adopting new accounting pronouncements, our financial results, our purchase commitments, our contributions to our pension plans, the selection of discount rates and recognition of any gains or losses for our benefit plans, our cost-control activities, timing, savings and headcount reduction recognized from our restructuring programs and other cost saving initiatives, uncertainties relating to Food and Drug Administration ("FDA") and other regulatory approvals, the integration of our acquisitions and other transactions, the separation of the electronic measurement business, transaction expenses related to the separation, post-separation expenses, exiting our Nuclear Magnetic Resonance ("NMR") business, our new organizational structure, our stock repurchase program, our declared dividends, our transition to lower-cost regions, and the existence of economic instability, that involve risks and uncertainties. Our actual results could differ materially from the results contemplated by these forward-looking statements due to various factors, including those discussed in Item 1A and elsewhere in this Form 10-K.

Overview and Executive Summary

Agilent Technologies, Inc. (“we”, “Agilent” or the “company”), incorporated in Delaware in May 1999, is the world's premier measurement company providing core bio-analytical and electronic measurement solutions to the life sciences, diagnostics and genomics, chemical analysis, communications and electronics industries. Our fiscal year end is October 31. Unless otherwise stated, all years and dates refer to our fiscal year.

On September 19, 2013, Agilent announced plans to separate into two publicly traded companies, one comprising of the life sciences, diagnostics and chemical analysis businesses that will retain the Agilent name, and the other one that will be comprised of the electronic measurement business that will be renamed Keysight Technologies, Inc. (“Keysight”). Keysight was incorporated in Delaware as a wholly-owned subsidiary of Agilent on December 6, 2013. Agilent transferred substantially all of the assets, liabilities and operations of the electronic measurement business to Keysight as of August 1, 2014. On November 1, 2014, we completed the distribution of 100% of the outstanding common shares of Keysight to Agilent stockholders who received one share of Keysight common stock for every two shares of Agilent held as of the close of business on the record date, October 22, 2014. We incurred pre-separation expenses of approximately $191 million in the year ended October 31, 2014. Pre-separation costs included all incremental expenses incurred by Agilent in order to effect the separation until the distribution date, November 1, 2014. They also included the cost of all new employees recruited in fiscal 2014 to operate the two separate companies. For the year ended October 31, 2014, we incurred $89 million of non-operating expenses related to the redemption of Agilent's debt obligations as part of our debt repositioning ahead of the distribution of Keysight. We also expect to incur some post-separation costs which include all incremental expenses incurred by Agilent in order to resize our global infrastructure organization in alignment with the relatively smaller footprint of the new company.  This will include expenses related to separation of IT infrastructure from Keysight until second quarter of fiscal 2015, streamlining of our residual IT infrastructure and elimination of redundant ERP (Enterprise Resource Planning) software. We also expect to incur, upon separation, transaction expenses, which, among other things, relate to investment banking and other advisory fees as well as tax costs related to the distribution. Total post-separation costs are expected to be approximately $50 million. The historical results of operations and the financial position of Keysight are included in the consolidated financial statements of Agilent and will be reported as discontinued operations beginning in the first quarter of 2015.

In November 2014, we announced a change in organizational structure designed to better serve our customers. Our life sciences business, excluding the nucleic acid solutions division, together with the chemical analysis business will merge to form a new segment called life sciences and applied markets business. Our diagnostics and genomics businesses will combine and will include the nucleic acid solutions division of our life sciences business to become the diagnostics and genomics segment. Finally, the crosslab segment will be formed from the services and consumables businesses. Financial reporting under this new structure will begin in the first quarter of 2015 with historical financial segment information recast to conform to this new presentation in our financial statements.

In the fourth quarter of 2014, Agilent announced that it is exiting its NMR business. Agilent stopped taking new NMR system orders, but the company will continue to meet customer commitments for orders in progress and for ongoing support

32

Table of Contents            

contracts and continue to provide service on all installed NMR systems. The company expects that this decision will eliminate about 300 jobs, mostly within the next 12 months. For the year ended October 31, 2014 charges of approximately $68 million were incurred in respect of the exit of this business. For additional details related to the exit of the NMR business see Note 14, "Restructuring and Exit of NMR Business".

On June 21, 2012, we completed our acquisition of Dako A/S through the acquisition of 100% of the share capital of Dako A/S, a limited liability company incorporated under the laws of Denmark (“Dako”), under the share purchase agreement, dated May 16, 2012. As a result of the acquisition, Dako became a wholly-owned subsidiary of Agilent. The consideration paid was approximately $2,143 million, of which $1,400 million was paid directly to the seller and $743 million was paid to satisfy the outstanding debt of Dako. Agilent funded the acquisition using existing cash. The acquisition has been accounted for in accordance with the authoritative accounting guidance and the results of Dako are included in Agilent's consolidated financial statements from the date of acquisition. For additional details related to the acquisition of Dako, see Note 3, "Acquisitions".

Agilent's total orders in 2014 were $7,134 million, an increase of 4 percent when compared to 2013. Foreign currency movements had an unfavorable impact of approximately 1 percentage point for the year ended October 31, 2014 when compared to 2013. Within our life sciences and diagnostics business orders increased 5 percent in 2014 compared to 2013. Chemical analysis orders increased 6 percent in 2014 when compared to 2013 and electronic measurement businesses orders increased 3 percent when compared to 2013. Agilent's total orders in 2013 were $6,827 million, a decrease of 1 percent when compared to 2012. Foreign currency movements had an unfavorable impact of approximately 2 percentage points for the year ended October 31, 2013 when compared to 2012. The increase in orders associated with the Dako acquisition accounted for approximately 3 percentage points of order growth for the year ended 2013 when compared to 2012.

Agilent's net revenue of $6,981 million in 2014 increased 3 percent when compared to 2013. Foreign currency movements for 2014 had an unfavorable impact of approximately 1 percentage point compared to 2013. Within our life sciences and diagnostics business revenue increased 3 percent in 2014 compared to 2013. There was growth in demand for life sciences and diagnostics products and services led by pharmaceutical and biotechnology and clinical markets. There was a decrease in demand from the life science research for the year ended October 31, 2014, when compared to the prior year. Within our chemical analysis business revenue grew 5 percent in 2014 compared with the prior year. There was a strong increase in revenue from the food safety and forensics with environmental and petrochemical markets also showing increases at a more modest level when compared to the prior year. Within electronic measurement, total revenue increased when compared to the prior year by 2 percent. General purpose markets increased with computer and semi-conductor markets improving, but aerospace and defense was down when compared to 2013. Also within electronic measurement, the communications test business increased for the year ended October 31, 2014 when compared to the prior year with wireless manufacturing growing strongly and R&D showing a moderate shortfall compared to the prior year. Agilent's net revenue of $6,782 million decreased 1 percent in 2013 when compared to 2012. Foreign currency movements for 2013 had an unfavorable impact of approximately 1 percentage point compared to 2012. Revenue associated with the Dako acquisition accounted for approximately 4 percentage points of the revenue growth for the year ended October 31, 2013 when compared to 2012.

Net income was $504 million in 2014 compared to net income of $724 million and $1,153 million in 2013 and 2012, respectively. In 2014, 2013 and 2012 we generated operating cash flows of $711 million, $1,152 million and $1,228 million, respectively. As of October 31, 2014 and 2013 we had cash and cash equivalents balances of $3,028 million and $2,675 million, respectively. Operating cash flows in 2014 were impacted by pre-separation costs and separation related taxes, the redemption of senior notes including payments relating to accrued interest and the timing of the purchase of shares under the employee stock purchase plan.

For the years ended October 31, 2014, 2013 and 2012 cash dividends of $176 million, $156 million and $104 million were paid on the company's outstanding common stock, respectively. On November 20, 2014, we declared a quarterly dividend of $0.10 per share of common stock, or approximately $34 million which will be paid on January 28, 2015 to shareholders of record as of the close of business on January 6, 2015. The timing and amounts of any future dividends are subject to determination and approval by our board of directors.

On July 14, 2014, we settled the redemption of all $500 million outstanding aggregate principal amount of our 5.5% senior notes ("2015 senior notes") due September 14, 2015 that had been called for redemption on June 12, 2014. The redemption price of approximately $528 million included a $28 million prepayment penalty, $1 million of amortization of debt issuance costs and discount, offset by the amortization of a deferred gain on the terminated interest rate swap related to those senior notes of approximately $8 million. We also paid accrued and unpaid interest of $9 million on the 2015 senior notes up to but not including the redemption date.


33

Table of Contents            

On October 20, 2014, we settled the redemption of $500 million of the $600 million outstanding aggregate principal amount of our 6.5% senior notes ("2017 senior notes") due November 1, 2017 that had been called for redemption on September 19, 2014. The redemption price of approximately $580 million included an $80 million prepayment penalty, $2 million of amortization of debt issuance costs and discount, offset by the amortization of a deferred gain on the terminated interest rate swap related to those senior notes of approximately $14 million. We also paid accrued and unpaid interest of $15 million on the 2017 senior notes up to but not including the redemption date.

On October 6, 2014 Keysight announced that it had agreed to sell $500 million of 3.30% senior notes due 2019 ("2019 senior notes") and $600 million of 4.55% senior notes due 2024 ("2024 senior notes"). The transaction closed on October 15, 2014. Each series of notes initially were guaranteed on an unsecured, unsubordinated basis by Agilent. The guarantees terminated upon the completion of the separation of Keysight from Agilent on November 1, 2014.

On November 22, 2013 we announced that our board of directors had authorized a new share repurchase program. The new program is designed to reduce or eliminate dilution resulting from issuance of stock under the company's employee equity incentive programs to target maintaining a weighted average share count of approximately 335 million diluted shares. For the year ended October 31, 2014, we repurchased 4 million shares for $200 million.

Looking forward, we expect positive trends to continue in our life sciences and diagnostics and chemical analysis businesses as we continue to invest in research and development and to improve our applications and solutions portfolio through the introduction of new products. We will continue to bring innovative new offerings to the marketplace, and expand our laboratory-wide services and consumables to drive growth in genomics, clinical research and diagnostic markets.

Critical Accounting Policies and Estimates

The preparation of financial statements in accordance with accounting principles generally accepted in the U.S. requires management to make estimates and assumptions that affect the amounts reported in our consolidated financial statements and accompanying notes. Management bases its estimates on historical experience and various other assumptions believed to be reasonable. Although these estimates are based on management's best knowledge of current events and actions that may impact the company in the future, actual results may be different from the estimates. An accounting policy is deemed to be critical if it requires an accounting estimate to be made based on assumptions about matters that are highly uncertain at the time the estimate is made, and if different estimates that reasonably could have been used or changes in the accounting estimate that are reasonably likely to occur could materially change the financial statements. Our critical accounting policies are those that affect our financial statements materially and involve difficult, subjective or complex judgments by management. Those policies are revenue recognition, inventory valuation, share-based compensation, retirement and post-retirement plan assumptions, valuation of goodwill and purchased intangible assets, restructuring and accounting for income taxes.

Revenue recognition.    We enter into agreements to sell products (hardware or software), services, and other arrangements (multiple element arrangements) that include combinations of products and services. Revenue from product sales, net of trade discounts and allowances, is recognized provided that persuasive evidence of an arrangement exists, delivery has occurred, the price is fixed or determinable, and collectability is reasonably assured. Delivery is considered to have occurred when title and risk of loss have transferred to the customer. Revenue is reduced for estimated product returns, when appropriate. For sales that include customer-specified acceptance criteria, revenue is recognized after the acceptance criteria have been met. For products that include installation, if the installation meets the criteria to be considered a separate element, product revenue is recognized upon delivery, and recognition of installation revenue occurs when the installation is complete. Otherwise, neither the product nor the installation revenue is recognized until the installation is complete. Revenue from services is deferred and recognized over the contractual period or as services are rendered and accepted by the customer. We allocate revenue to each element in our multiple-element arrangements based upon their relative selling prices. We determine the selling price for each deliverable based on a selling price hierarchy. The selling price for a deliverable is based on our vendor specific objective evidence (VSOE) if available, third-party evidence (TPE) if VSOE is not available, or estimated selling price (ESP) if neither VSOE nor TPE is available. Revenue from the sale of software products that are not required to deliver the tangible product's essential functionality are accounted for under software revenue recognition rules. Revenue allocated to each element is then recognized when the basic revenue recognition criteria for that element have been met. The amount of product revenue recognized is affected by our judgments as to whether an arrangement includes multiple elements.

We use VSOE of selling price in the selling price allocation in all instances where it exists. VSOE of selling price for products and services is determined when a substantial majority of the selling prices fall within a reasonable range when sold separately. TPE of selling price can be established by evaluating largely interchangeable competitor products or services in standalone sales to similarly situated customers. As our products contain a significant element of proprietary technology and the solution offered differs substantially from that of competitors, it is difficult to obtain the reliable standalone competitive pricing

34

Table of Contents            

necessary to establish TPE. ESP represents the best estimate of the price at which we would transact a sale if the product or service were sold on a standalone basis. We determine ESP for a product or service by using historical selling prices which reflect multiple factors including, but not limited to customer type, geography, market conditions, competitive landscape, gross margin objectives and pricing practices. The determination of ESP is made through consultation with and approval by management. We may modify or develop new pricing practices and strategies in the future. As these pricing strategies evolve changes may occur in ESP. The aforementioned factors may result in a different allocation of revenue to the deliverables in multiple element arrangements, which may change the pattern and timing of revenue recognition for these elements but will not change the total revenue recognized for the arrangement.

Inventory valuation.    We assess the valuation of our inventory on a periodic basis and make adjustments to the value for estimated excess and obsolete inventory based upon estimates about future demand and actual usage. Such estimates are difficult to make under most economic conditions. The excess balance determined by this analysis becomes the basis for our excess inventory charge. Our excess inventory review process includes analysis of sales forecasts, managing product rollovers and working with manufacturing to maximize recovery of excess inventory. If actual market conditions are less favorable than those projected by management, additional write-downs may be required. If actual market conditions are more favorable than anticipated, inventory previously written down may be sold to customers, resulting in lower cost of sales and higher income from operations than expected in that period. In the fourth quarter of 2014, Agilent announced it is exiting the NMR business, and as a result, recorded an excess inventory charge of $30 million.

Share-based compensation.    We account for share-based awards in accordance with the authoritative guidance. Under the authoritative guidance, share-based compensation expense is primarily based on estimated grant date fair value and is recognized on a straight line basis. The fair value of share-based awards for employee stock option awards was estimated using the Black-Scholes option pricing model. Shares granted under the Long-Term Performance Program ("LTPP") were valued using the Monte Carlo simulation model. The estimated fair value of restricted stock unit awards is determined based on the market price of Agilent's common stock on the date of grant adjusted for expected dividend yield.  On January 17, 2012, the company's Board of Directors approved the initiation of quarterly cash dividends to the company's shareholders. The fair value of all the awards granted prior to the declaration of quarterly cash dividend was measured based on an expected dividend yield of 0%. The Employee Stock Purchase Plan ("ESPP") allows eligible employees to purchase shares of our common stock at 85 percent of the fair market value at the purchase date.

Both the Black-Scholes and Monte Carlo simulation fair value models require the use of highly subjective and complex assumptions, including the option's expected life and the price volatility of the underlying stock. The expected stock price volatility assumption was determined using the historical volatility of Agilent's stock option over the most recent historical period equivalent to the expected life. A 10 percent increase in our historical estimated volatility from 39 percent to 49 percent for our most recent employee stock option grant would generally increase the value of an award and the associated compensation cost by approximately 23 percent if no other factors were changed.

For the grants awarded under the 2009 stock plan after November 1, 2010, we increased the period available to retirement eligible employees to exercise their options from three years at retirement date to the full contractual term of ten years. In developing our estimated life of our employee stock options of 5.8 years for 2012 to 2014, we considered the historical option exercise behavior of our executive employees who were granted the majority of the options in the annual grants, which we believe is representative of future behavior. See Note 4, "Share-based Compensation," to the consolidated financial statements for more information.

The assumptions used in calculating the fair value of share-based awards represent our best estimates, but these estimates involve inherent uncertainties and the application of management judgment. Although we believe the assumptions and estimates we have made are reasonable and appropriate, changes in assumptions could materially impact our reported financial results.

Retirement and post-retirement benefit plan assumptions.    Retirement and post-retirement benefit plan costs are a significant cost of doing business. They represent obligations that will ultimately be settled sometime in the future and therefore are subject to estimation. Pension accounting is intended to reflect the recognition of future benefit costs over the employees' average expected future service to Agilent based on the terms of the plans and investment and funding decisions. To estimate the impact of these future payments and our decisions concerning funding of these obligations, we are required to make assumptions using actuarial concepts within the framework of accounting principles generally accepted in the U.S. Two critical assumptions are the discount rate and the expected long-term return on plan assets. Other important assumptions include, expected future salary increases, expected future increases to benefit payments, expected retirement dates, employee turnover, retiree mortality rates, and portfolio composition. We evaluate these assumptions at least annually.

The discount rate is used to determine the present value of future benefit payments at the measurement date - October 31 for both U.S. and non-U.S. plans. For 2014 and 2013, the U.S. discount rates were based on the results of matching expected plan

35

Table of Contents            

benefit payments with cash flows from a hypothetically constructed bond portfolio and decreased in 2014 from the previous year. For 2014 and 2013, the discount rate for non-U.S. plans was generally based on published rates for high quality corporate bonds and in 2014, decreased from the previous year. If we changed our discount rate by 1 percent, the impact would be $8 million on U.S. pension expense and $21 million on non-U.S. pension expense. Lower discount rates increase present values and subsequent year pension expense; higher discount rates decrease present values and subsequent year pension expense.

The company uses alternate methods of amortization as allowed by the authoritative guidance which amortizes the actuarial gains and losses on a consistent basis for the years presented. For U.S. Plans, gains and losses are amortized over the average future working lifetime. For most Non-U.S. Plans and U.S. Post-Retirement Benefit Plans, gains and losses are amortized using a separate layer for each year's gains and losses. The expected long-term return on plan assets is estimated using current and expected asset allocations as well as historical and expected returns. Plan assets are valued at fair value. If we changed our estimated return on assets by 1 percent, the impact would be $10 million on U.S. pension expense and $17 million on non-U.S. pension expense. For 2014, actual return on assets was above expectations which, along with contributions during the year, reduced next year’s pension cost as well as improved the funded status at year end. The net periodic pension and post-retirement benefit costs recorded in operations excluding curtailments and settlements were $13 million in 2014, $58 million in 2013, and $52 million in 2012.

Goodwill and Purchased Intangible Assets. Under the authoritative guidance we have the option to perform a qualitative assessment to determine whether further impairment testing is necessary. The accounting standard gives an entity the option to first assess qualitative factors to determine whether performing the two-step test is necessary. If an entity believes, as a result of its qualitative assessment, that it is more-likely-than-not (i.e. greater than 50% chance) that the fair value of a reporting unit is less than its carrying amount, the quantitative impairment test will be required. Otherwise, no further testing will be required.

The guidance includes examples of events and circumstances that might indicate that a reporting unit's fair value is less than its carrying amount. These include macro-economic conditions such as deterioration in the entity's operating environment or industry or market considerations; entity-specific events such as increasing costs, declining financial performance, or loss of key personnel; or other events such as an expectation that a reporting unit will be sold or a sustained decrease in the stock price on either an absolute basis or relative to peers.

If it is determined, as a result of the qualitative assessment, that it is more-likely-than-not that the fair value of a reporting unit is less than its carrying amount, the provisions of authoritative guidance require that we perform a two-step impairment test on goodwill. In the first step, we compare the fair value of each reporting unit to its carrying value. The second step (if necessary) measures the amount of impairment by applying fair-value-based tests to the individual assets and liabilities within each reporting unit. As defined in the authoritative guidance, a reporting unit is an operating segment, or one level below an operating segment. We aggregate components of an operating segment that have similar economic characteristics into our reporting units.

In fiscal year 2014, we assessed goodwill impairment for our four reporting units which consisted of two segments: chemical analysis and electronic measurement; and two reporting units under the life sciences and diagnostics segment. The first of these two reporting units related to our life sciences business and the second related to our diagnostics business. We performed a qualitative test for goodwill impairment of the four reporting units, as of September 30, 2014. Based on the results of our qualitative testing, we believe that it is more-likely-than-not that the fair value of these reporting units are greater than their respective carrying values. Each quarter we review the events and circumstances to determine if goodwill impairment is indicated. There was no impairment of goodwill during the years ended October 31, 2014, 2013 and 2012.
 
Purchased intangible assets consist primarily of acquired developed technologies, proprietary know-how, trademarks, and customer relationships and are amortized using the best estimate of the asset's useful life that reflect the pattern in which the economic benefits are consumed or used up or a straight-line method ranging from 6 months to 15 years. In-process research and development ("IPR&D") is initially capitalized at fair value as an intangible asset with an indefinite life and assessed for impairment thereafter. When the IPR&D project is complete, it is reclassified as an amortizable purchased intangible asset and is amortized over its estimated useful life. If an IPR&D project is abandoned, Agilent will record a charge for the value of the related intangible asset to Agilent's condensed consolidated statement of operations in the period it is abandoned.

Agilent's indefinite-lived intangible assets are IPR&D intangible assets. The accounting guidance allows a qualitative approach for testing indefinite-lived intangible assets for impairment, similar to the issued impairment testing guidance for goodwill and allowed the option to first assess qualitative factors (events and circumstances) that could have affected the significant inputs used in determining the fair value of the indefinite-lived intangible asset to determine whether it is more-likely-than-not (i.e. greater than 50% chance) that the indefinite-lived intangible asset is impaired. An organization may choose to bypass the qualitative assessment for any indefinite-lived intangible asset in any period and proceed directly to calculating its fair value. We performed a qualitative test for impairment of indefinite-lived intangible assets as of September 30, 2014. Based on the results of our qualitative

36

Table of Contents            

testing, we believe that it is more-likely-than-not that the fair value of these indefinite-lived intangible assets is greater than their respective carrying values. Each quarter we review the events and circumstances to determine if impairment of indefinite-lived intangible asset is indicated. In the years ended October 31, 2014, 2013 and 2012, we recorded an impairment of $4 million, $1 million and $1 million, respectively due to the cancellation of certain IPR&D projects. In addition, in the year ended October 31, 2014, we also recorded $12 million of impairment of other intangibles due to the exit of our NMR business.

Restructuring and exit of NMR business. The main components of expenses are related to workforce reductions, assets impairments and write-downs and special charges to inventory, which mainly relates to exiting of one of our businesses. Workforce reduction charges are accrued when payment of benefits that the employees are entitled to becomes probable and the amounts can be estimated. We have also assessed the recoverability of our long-lived assets, by determining whether the carrying value of such assets will be recovered through undiscounted future cash flows. Asset impairments primarily consist of property, plant and equipment and are based on an estimate of the amounts and timing of future cash flows related to the expected future remaining use and ultimate sale or disposal of buildings and equipment net of costs to sell. The charges related to inventory include estimated future inventory disposal payments that we are contractually obliged to make to our suppliers and inventory written-down to net realizable value. If the amounts and timing of cash flows from restructuring activities are significantly different from what we have estimated, the actual amount of restructuring and asset impairment charges could be materially different, either higher or lower, than those we have recorded.

Accounting for income taxes. We must make certain estimates and judgments in determining income tax expense for financial statement purposes. These estimates and judgments occur in the calculation of tax credits, benefits and deductions, and in the calculation of certain tax assets and liabilities which arise from differences in the timing of recognition of revenue and expense for tax and financial statement purposes, as well as interest and penalties related to uncertain tax positions. Significant changes to these estimates may result in an increase or decrease to our tax provision in a subsequent period.

Significant management judgment is also required in determining whether deferred tax assets will be realized in full or in part. When it is more-likely-than-not that all or some portion of specific deferred tax assets such as net operating losses or foreign tax credit carryforwards will not be realized, a valuation allowance must be established for the amount of the deferred tax assets that cannot be realized. We consider all available positive and negative evidence on a jurisdiction-by-jurisdiction basis when assessing whether it is more likely than not that deferred tax assets are recoverable. We consider evidence such as our past operating results, the existence of losses in recent years and our forecast of future taxable income. In the fourth quarter of fiscal 2012 we released the valuation allowance for the majority of our U.S. deferred tax assets. At October 31, 2014, we continue to recognize a valuation allowance for certain U.S. state and foreign deferred tax assets. We intend to maintain a valuation allowance in these jurisdictions until sufficient positive evidence exists to support its reversal.

We have not provided for all U.S. federal income and foreign withholding taxes on the undistributed earnings of some of our foreign subsidiaries because we intend to reinvest such earnings indefinitely. Should we decide to remit this income to the U.S. in a future period, our provision for income taxes will increase materially in that period.

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax law and regulations in a multitude of jurisdictions. Although the guidance on the accounting for uncertainty in income taxes prescribes the use of a recognition and measurement model, the determination of whether an uncertain tax position has met those thresholds will continue to require significant judgment by management. In accordance with the guidance on the accounting for uncertainty in income taxes, for all U.S. and other tax jurisdictions, we recognize potential liabilities for anticipated tax audit issues based on our estimate of whether, and the extent to which, additional taxes and interest will be due. The ultimate resolution of tax uncertainties may differ from what is currently estimated, which could result in a material impact on income tax expense. If our estimate of income tax liabilities proves to be less than the ultimate assessment, a further charge to expense would be required. If events occur and the payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when we determine the liabilities are no longer necessary. We include interest and penalties related to unrecognized tax benefits within the provision for income taxes on the consolidated statements of operations.

As a part of our accounting for business combinations, intangible assets are recognized at fair values and goodwill is measured as the excess of consideration transferred over the net estimated fair values of assets acquired. Impairment charges associated with goodwill are generally not tax deductible and will result in an increased effective income tax rate in the period that any impairment is recorded. Amortization expenses associated with acquired intangible assets are generally not tax deductible and therefore deferred tax liabilities have been recorded for non-deductible amortization expenses as a part of the accounting for business combinations.


37

Table of Contents            

Adoption of New Pronouncements

See Note 2, "New Accounting Pronouncements," to the consolidated financial statements for a description of new accounting pronouncements.

Restructuring and Exit of NMR Business
 
During the fourth quarter of fiscal year 2014, we made the decision to cease the manufacture and sale of our nuclear magnetic resonance (“NMR”) product line within our life sciences and diagnostics segment. The exit of the NMR business was primarily due to the lack of growth and profitability of the product line. In connection with the exit, we have recorded approximately $68 million in restructuring and other related costs associated with the closure of NMR. These costs are comprised of severance and other personnel costs related to the workforce reduction of approximately 300 employees primarily located in the United Kingdom and California and non-cash charges related to intangible asset impairments and other asset write-downs including inventory. We expect to substantially complete these restructuring activities by the end of fiscal 2016. The exit of the NMR business is expected to result in a positive impact of approximately $10 million in operating profit in fiscal year 2015. As of October 31, 2014, substantially all employees are pending termination under the above actions and approximately $2 million was paid under the above actions.

In the second quarter of 2013, we accrued for a targeted restructuring program to reduce Agilent's total headcount by approximately 450 regular employees, representing approximately 2 percent of our global workforce. In the fourth quarter of fiscal year 2013, Agilent announced plans to separate the electronic measurement business from Agilent which was completed on November 1, 2014. As a result, approximately 50 employees from the targeted restructuring plan have been redeployed within the company, reducing the total headcount under this plan to 400 employees. The timing and scope of workforce reductions will vary based on local legal requirements. When completed the restructuring program expected to result in an approximately $50 million reduction in annual cost of sales and operating expenses over the three business segments. In addition we have been streamlining our manufacturing operations. As part of this action, we anticipate the reduction of approximately 250 positions to reduce our annual cost of sales.

For the year ended October 31, 2014 we reversed $4 million in restructuring charges associated with employees that have been redeployed within the company. Within the U.S, we have substantially completed these restructuring activities.  Internationally, we expect to complete almost all of these restructuring activities by the end of the first quarter of fiscal 2015. As of October 31, 2014, approximately 70 employees, including Keysight employees, are pending termination and approximately $46 million was been paid under the above actions. In the year ended October 31, 2014, we have realized the expected savings within our three business segments as a result of these restructuring activities.

Foreign Currency

Our revenues, costs and expenses, and monetary assets and liabilities are exposed to changes in foreign currency exchange rates as a result of our global operating and financing activities. We hedge revenues, expenses and balance sheet exposures that are not denominated in the functional currencies of our subsidiaries on a short term and anticipated basis. We do experience some fluctuations within individual lines of the consolidated statement of operations and balance sheet because our hedging program is not designed to offset the currency movements in each category of revenues, expenses, monetary assets and liabilities. Our hedging program is designed to hedge currency movements on a relatively short-term basis (up to a rolling twelve month period). Therefore, we are exposed to currency fluctuations over the longer term. To the extent that we are required to pay for all, or portions, of an acquisition price in foreign currencies, Agilent may enter into foreign exchange contracts to reduce the risk that currency movements will impact the U.S. dollar cost of the transaction.

Results from Operations


38

Table of Contents            

Orders and Net Revenue

 
Years Ended October 31,
 
2014 over 2013
% Change
 
2013 over 2012
% Change
 
2014
 
2013
 
2012
 
 
(in millions)
 
 
 
 
Orders
$
7,134

 
$
6,827

 
$
6,877

 
4%
 
(1)%
Net revenue:
 
 
 
 
 
 
 
 
 
Products
$
5,686

 
$
5,534

 
$
5,659

 
3%
 
(2)%
Services and other
$
1,295

 
$
1,248

 
$
1,199

 
4%
 
4%
Total net revenue
$
6,981

 
$
6,782

 
$
6,858

 
3%
 
(1)%
 
 
Years Ended October 31,
 
2014 over 2013
Ppts Change
 
2013 over 2012
Ppts Change
 
2014
 
2013
 
2012
 
% of total net revenue:
 
 
 
 
 
 
 
 
 
Products
81
%
 
82
%
 
83
%
 
(1) ppt
 
(1) ppt
Services and other
19
%
 
18
%
 
17
%
 
1 ppt
 
1 ppt
Total
100
%
 
100
%
 
100
%
 
 
 
 

In general, recorded orders represent firm purchase commitments from our customers with established terms and conditions for products and services that will be delivered within six months.

Agilent's total orders in 2014 were $7,134 million, an increase of 4 percent when compared to 2013. Foreign currency movements had an unfavorable impact of approximately 1 percentage point for the year ended October 31, 2014 when compared to 2013. Within our life sciences and diagnostics business orders increased 5 percent in 2014 compared to 2013. Chemical analysis orders increased 6 percent in 2014 when compared to 2013 and electronic measurement businesses orders increased 3 percent when compared to 2013. Agilent's total orders in 2013 were $6,827 million, a decrease of 1 percent when compared to 2012. Foreign currency movements had an unfavorable impact of approximately 2 percentage points for the year ended October 31, 2013 when compared to 2012. The increase in orders associated with the Dako acquisition accounted for approximately 3 percentage points of order growth for the year ended 2013 when compared to 2012.

Agilent's net revenue of $6,981 million in 2014 increased 3 percent when compared to 2013. Foreign currency movements for 2014 had an unfavorable impact of approximately 1 percentage point compared to 2013. Within our life sciences and diagnostics business revenue increased 3 percent in 2014 compared to 2013. There was growth in demand for life sciences and diagnostics products and services led by pharmaceutical and biotechnology and clinical markets. There was a decrease in demand from the life science research for the year ended October 31, 2014, when compared to the prior year. Within our chemical analysis business revenue grew 5 percent in 2014 compared with the prior year. There was a strong increase in revenue from the food safety and forensics with environmental and petrochemical markets also showing increases at a more modest level when compared to the prior year. Within electronic measurement, total revenue increased when compared to the prior year by 2 percent. General purpose markets increased with computer and semi-conductor markets improving, but aerospace and defense was down when compared to 2013. Also within electronic measurement, the communications test business increased for the year ended October 31, 2014 when compared to the prior year with wireless manufacturing growing strongly and R&D showing a moderate shortfall compared to the prior year. Agilent's net revenue of $6,782 million decreased 1 percent in 2013 when compared to 2012. Foreign currency movements for 2013 had an unfavorable impact of approximately 1 percentage point compared to 2012. Revenue associated with the Dako acquisition accounted for approximately 4 percentage points of the revenue growth for the year ended October 31, 2013 when compared to 2012.

Services and other revenue include revenue generated from servicing our installed base of products, warranty extensions and consulting. Services and other revenue increased 4 percent in 2014 as compared to 2013. The service and other revenue growth is impacted by a portion of the revenue being driven by the current and previously installed produce base. Service and other revenue increased due to increased service contract renewals and laboratory productivity services, but revenue from the sale of extended warranties within our electronic measurement business was flat due to the extension of standard terms from one year to three years in 2013. Services and other revenue increased 4 percent in 2013 as compared to 2012.


39

Table of Contents            

Backlog

Backlog represents the amount of revenue expected from orders that have already been booked, including orders for goods and services that have not been delivered to customers, orders invoiced but not yet recognized as revenue, and orders for goods that were shipped but not invoiced, awaiting acceptance by customers.
On October 31, 2014, our unfilled backlog for the chemical analysis business was approximately $430 million, as compared to approximately $380 million at October 31, 2013. Within our life sciences and diagnostics business, our unfilled backlog was approximately $530 million on October 31, 2014 as compared to approximately $520 million at October 31, 2013.

On October 31, 2014, our unfilled backlog for the electronic measurement business was approximately $780 million, as compared to approximately $760 million at October 31, 2013. It is expected that the unfilled backlog will be fulfilled by Keysight which separated from Agilent on November 1, 2014.

We expect that a majority of the unfilled backlog for all businesses will be delivered to customers within six months. On average, our unfilled backlog represents approximately three months' worth of revenues. We believe backlog on any particular date, while indicative of short-term revenue performance, is not necessarily a reliable indicator of medium or long-term revenue performance.

Costs and Expenses

 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
Gross margin on products
53.0
%
 
53.5
%
 
53.9
%
 
(1) ppt
 
Gross margin on services and other
44.8
%
 
46.2
%
 
46.1
%
 
(1) ppt
 
Total gross margin
51.5
%
 
52.1
%
 
52.6
%
 
(1) ppt
 
Operating margin
11.9
%
 
14.0
%
 
16.3
%
 
(2) ppts
 
(2) ppts
(in millions)
 
 
 
 
 
 
 
 
 
Research and development
$
719

 
$
704

 
$
668

 
2%
 
5%
Selling, general and administrative
$
2,043

 
$
1,880

 
$
1,817

 
9%
 
3%

In 2014, total gross margins decreased one percentage point when compared to the same period last year. Gross margins in our life sciences and diagnostics business were relatively flat, up in our chemicals analysis business and down within our electronic measurement business for the year ended October 31, 2014 when compared to 2013. There were changes in gross margin due to higher inventory charges driven by the exit of the NMR business, expenditures to address an FDA warning letter, increased warranty costs and product discounts offset by favorable manufacturing overhead costs. Operating margins declined by 2 percentage point in the year ended October 31, 2014 when compared to the same period last year. The overall decline in operating margin for the year ended October 31, 2014 was mostly due to pre-separation costs. Operating margins within our life sciences and diagnostics business was down and in the chemical analysis business operating margins increased for the year ended October 31, 2014 when compared to 2013. Within electronic measurement operating margins was flat for the year ended October 31, 2014 when compared to 2013.

In 2013, total gross margin was flat in comparison to 2012. Increased costs, in particular, intangible amortization from the acquisition of Dako, restructuring expenses and inventory charges were offset by a decrease in variable and incentive pay. Operating margins in 2013 decreased 2 percentage points compared to 2012 as a result of increased operating expenses associated with the Dako acquisition, including increased intangible asset amortization, restructuring costs, higher wages and increased inventory charges offset by lower variable and incentive pay. This was the result of maintaining cost control through a decrease in variable and incentive pay while absorbing increases in expenditure from Dako and wage increases.

Gross inventory charges were $79 million in 2014, $48 million in 2013 and $30 million in 2012. Sales of previously written down inventory were $9 million in 2014, $7 million in 2013 and $5 million in 2012.

Our research and development efforts focus on potential new products and product improvements covering a wide variety of technologies, none of which is individually significant to our operations. We conduct five types of research and development: basic research, foundation technologies, communications, life sciences and measurement. Our research seeks to improve on various

40

Table of Contents            

technical competencies in electronics, photonics, software, systems and solutions and life sciences. In each of these research fields, we conduct research that is focused on specific product development for release in the short-term as well as other research that is intended to be the foundation for future products over a longer time-horizon. Some of our product development research is designed to improve on the more than 20,000 products already in production, focus on major new product releases, and develop new product segments for the future. Due to the breadth of research and development projects across all of our businesses, there are a number of drivers of this expense. We remain committed to invest significantly in research and development and have focused our development efforts on key strategic opportunities to align our business with available markets and position ourselves to capture market share.

Research and development expenditures increased 2 percent in 2014 compared to 2013. R&D expenditure increased within our life sciences and diagnostics and chemical analysis businesses with investments for product and software R&D together with wage increases and higher variable pay. Within our electronic measurement business there was a reduction in R&D expenditure within electronic measurement business due to savings from prior year's restructuring. Research and development expenditures increased 5 percent in 2013 compared to 2012. Increased expenditure was due to our continued investment in new product development and technologies, increased costs due to Dako, restructuring costs and wage increases, partially offset by lower variable and incentive pay. We remain committed to invest in research and development and have focused our development efforts on key strategic opportunities in order to align our business with available markets and position ourselves to capture market share.

Selling, general and administrative expenses increased 9 percent in 2014 compared to 2013. Selling, general and administrative expenditure increased mostly due to pre-separation costs with other increases in wages, higher commissions and investments in sales channel coverage partially offset by an $11 million gain on sale of land and savings due to restructuring charges incurred in the prior year. Selling, general and administrative expenses increased 3 percent in 2013 compared to 2012. Increases were due to the acquisition of Dako, including amortization of intangible assets, wage increases and investments in sales channel coverage in emerging geographies and restructuring costs offset by decreases in variable and incentive pay.

Interest expense for the years ended October 31, 2014, 2013 and 2012 was $113 million, $107 million and $101 million, respectively, and relates to the interest charged on our senior notes offset by the amortization of deferred gains recorded upon termination of interest rate swap contracts.

At October 31, 2014, our headcount was approximately 21,400 compared to 20,600 in 2013 and 20,500 in 2012. Following the separation of Keysight from Agilent our headcount will be approximately 12,000.

Other income (expense)

For the year ended October 31, 2014 other income (expense), net includes a net loss on the early redemption of the 2015 senior notes and partial redemption of the 2017 notes of $89 million consisting of the prepayment penalties of $108 million, $3 million of accelerated amortization of debt issuance costs and discount and the accelerated amortization of interest rate swap gains of $22 million.

Income Taxes

 
Years Ended October 31,
 
2014
 
2013
 
2012
 
(in millions)
Provision (benefit) for income taxes
$
142

 
$
135

 
$
(110
)

For 2014, the effective tax rate was 22 percent. The 22 percent effective tax rate is lower than the U.S. statutory rate primarily due to the mix of earnings in non-U.S. jurisdictions taxed at lower statutory rates; in particular Singapore where we enjoy tax holidays. The impact of the tax holidays decreased income taxes by $76 million in 2014. In the fourth quarter we recorded an out of period tax expense of $13 million tax for corrections to U.S. deferred taxes. In the third quarter we recorded out of period adjustments consisting of a $9 million tax benefit related to the correction of the tax basis of land in the UK and a $3 million tax expense to correct tax related balance sheet accounts. In the second quarter we recorded an out of period adjustment to tax expense of approximately $12 million for correction of transfer pricing for tax years 2012 and 2013. These corrections are not considered material to current or prior periods. The effective tax rate increased by 6 percent over the previous year primarily due to lower earnings in non-US jurisdictions taxed a lower statutory rates, the out of period adjustments listed above and the impact of non-deductible costs related to the separation of Keysight of $17 million.


41

Table of Contents            

For 2013, the effective tax rate was 16 percent. The 16 percent effective tax rate is lower than the U.S. statutory rate primarily due to the mix of earnings in non-U.S. jurisdictions taxed at lower statutory rates; in particular Singapore where we enjoy tax holidays. The impact of the tax holidays decreased income taxes by $127 million in 2013. The effective tax rate also included a $12 million out-of-period adjustment to increase tax expense, recognized in the second quarter of 2013, associated with the write off of deferred tax assets related to foreign tax credits incorrectly claimed in prior years.

For 2012, the effective tax rate was a benefit of 11 percent. The 11 percent effective tax rate benefit reflected tax on earnings in jurisdictions that had low effective tax rates and included a $280 million tax benefit due to the reversal of a valuation allowance for most U.S. federal and state deferred tax assets. Valuation allowances require an assessment of both positive and negative evidence when determining whether it is more likely than not that deferred tax assets are recoverable. Such assessment is required on a jurisdiction by jurisdiction basis. In the fourth quarter of 2012, management concluded that the valuation allowance for most of Agilent's U.S. federal and state deferred tax assets was no longer needed primarily due to the emergence from cumulative losses in recent years, the return to sustainable U.S. operating profits and the expectation of sustainable profitability in future periods. As of October 31, 2012, the cumulative positive evidence outweighed the negative evidence regarding the likelihood that most of the deferred tax asset for Agilent's U.S. consolidated income tax group will be realized. Accordingly, we recognized a non-recurring tax benefit of $280 million relating to the valuation allowance reversal. The effective tax rate also included a non-recurring tax expense of $88 million relating to an increase in the overall residual U.S. tax expected to be imposed upon the repatriation of unremitted foreign earnings previously considered permanently reinvested. During the fourth quarter of 2012, we assessed the forecasted cash needs and overall financial position of our foreign subsidiaries and determined that a portion of previously permanently reinvested earnings would no longer be reinvested overseas. The effective tax rate was also reduced by a $68 million tax benefit primarily associated with the recognition of previously unrecognized tax benefits and the reversal of the related interest accruals due to the reassessment of certain uncertain tax positions relating to foreign jurisdictions.

Agilent enjoys tax holidays in several different jurisdictions, most significantly in Singapore. The tax holidays provide lower rates of taxation on certain classes of income and require various thresholds of investments and employment or specific types of income in those jurisdictions. The tax holidays are due for renewal between 2015 and 2023. The Keysight entity in Singapore has not obtained a tax holiday to date. Accordingly, income tax expense has been recorded on its fourth quarter earnings at the statutory rate. As a result of the incentives, the impact of the tax holidays decreased income taxes by $76 million, $127 million, and $122 million in 2014, 2013, and 2012, respectively. The benefit of the tax holidays on net income per share (diluted) was approximately $0.23, $0.37, and $0.35 in 2014, 2013 and 2012, respectively.

In accordance with the guidance on the accounting for uncertainty in income taxes, for all U.S. and other tax jurisdictions, we recognize potential liabilities for anticipated tax audit issues based on our estimate of whether, and the extent to which, additional taxes and interest will be due. If our estimate of income tax liabilities proves to be less than the ultimate assessment, a further charge to expense would be required. If events occur and the payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when we determine the liabilities are no longer necessary. We include interest and penalties related to unrecognized tax benefits within the provision for income taxes on the consolidated statements of operations.

In the U.S., tax years remain open back to the year 2008 for federal income tax purposes and the year 2000 for significant states. On January 29, 2014 we reached an agreement with the IRS for the tax years 2006 through 2007. The settlement resulted in the recognition of previously unrecognized tax benefits of $160 million, offset by a tax liability on foreign distributions of approximately $148 million principally related to additional foreign earnings that were recognized in conjunction with the settlement. Agilent's U.S. federal income tax returns for 2008 through 2011 are currently under audit by the IRS.

In connection with the settlement of the 2006-2007 IRS audit, we identified during the first quarter of fiscal year 2014 an overstatement of approximately $65 million in our long-term tax liabilities. The overstatement was recorded in 2008 as a cumulative effect of a change in accounting principle when we adopted Accounting Standard Codification 740-10, Income Taxes. Accordingly, we corrected the error by reducing long-term tax liabilities and increasing retained earnings by $65 million in the first quarter of fiscal 2014. The correction had no impact on net income or cash flows in any prior period and is not considered material to total liabilities or equity in any prior period.

In other major jurisdictions where the company conducts business, the tax years generally remain open back to the year 2003.  With these jurisdictions and the U.S., it is reasonably possible that there could be significant changes to our unrecognized tax benefits in the next twelve months due to either the expiration of a statute of limitation or a tax audit settlement.  Given the number of years and numerous matters that remain subject to examination in various tax jurisdictions, management is unable to estimate the range of possible changes to the balance of our unrecognized tax benefits.



42

Table of Contents            




Segment Overview

Through October 31, 2014, we have three business segments comprised of the life sciences and diagnostics business, the chemical analysis business and the electronic measurement business.

Life Sciences and Diagnostics

Our life sciences and diagnostics business provides application-focused solutions that include reagents, instruments, software, consumables, and services that enable customers to identify, quantify and analyze the physical and biological properties of substances and products, as well as enable customers in the clinical and life sciences research areas to interrogate samples at the molecular level. Key product categories include: liquid chromatography ("LC") systems, columns and components; liquid chromatography mass spectrometry ("LCMS") systems; laboratory software and informatics systems; laboratory automation and robotic systems; dissolution testing; nucleic acid solutions; Nuclear Magnetic Resonance, and X-Ray Diffraction systems; services and support for the aforementioned products; immunohistochemistry; In Situ Hybridization;  Hematoxylin and Eosin staining; special staining, DNA mutation detection; genotyping; gene copy number determination; identification of gene rearrangements; DNA methylation profiling; gene expression profiling; next generation sequencing target enrichment; and automated gel electrophoresis-based sample analysis systems. We also collaborate with a number of major pharmaceutical companies to develop new potential pharmacodiagnostics, also called companion diagnostics, with the potential of identifying patients most likely to benefit from a specific targeted therapy.

Orders and Net Revenue

 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
 
(in millions)
 
 
 
 
Orders
$
2,424

 
$
2,319

 
$
1,993

 
5%
 
16%
Net revenue from products
$
1,914

 
$
1,868

 
$
1,578

 
2%
 
18%
Net revenue from services and other
458

 
432

 
406

 
6%
 
6%
Total net revenue
$
2,372

 
$
2,300

 
$
1,984

 
3%
 
16%

Life sciences and diagnostics orders in 2014 grew 5 percent compared to 2013. Foreign currency movements had a negligible impact on order growth when compared to the prior year. Order results were led by solid demand in the LC, services and consumables portfolios, along with strength in LCMS, nucleic acid, genomics and informatics. Geographically, orders grew 5 percent in the Americas, grew 9 percent in Europe, declined 9 percent in Japan, and grew 2 percent in Asia Pacific excluding Japan during 2014 when compared to 2013. Life sciences and diagnostics orders in 2013 increased 16 percent compared to 2012. Foreign currency movements had an unfavorable impact of 2 percentage points on order growth when compared to the prior year. Excluding the impact of the Dako acquisition, order growth of 4 percent in 2013 was driven by strength in LC, genomics, services and consumables, partially offset by declines in LCMS and research products.

Life sciences and diagnostics net revenue in 2014 increased 3 percent compared to 2013. Foreign currency movements for 2013 had a negligible impact on revenue growth when compared to the prior year. Revenue growth was led by strength in genomics, LC, consumables and services portfolios. Geographically, revenue grew 3 percent in the Americas, grew 5 percent in Europe, declined 1 percent in Japan, and grew 3 percent in Asia Pacific excluding Japan during 2014 when compared to 2013. The economic recovery and improved government spending continued to drive growth in the Americas. Increased spending for life science research in China drove the moderate growth in Asia Pacific excluding Japan, while Japan reflected the unfavorable impact of currency and lower government spending. Life sciences and diagnostics revenue in 2013 increased 16 percent compared to 2012. Foreign currency movements for 2013 had an unfavorable impact of 1 percentage point compared to 2012. Excluding the impact of the Dako acquisition, revenue growth of 3 percent was led by strength in LC, consumables and services, partially offset by declines in LCMS and research products.

End market performance reflected mixed growth across markets in 2014. Pharmaceutical and biotechnology market growth was driven by technology refreshes and continued specialty pharmaceutical demand. Despite budget restrictions in most pharmaceutical companies, technology refresh programs in large and mid-size pharmaceutical companies continue to drive traditional replacement business to move to the latest technologies. In life science research, improved government spending on

43

Table of Contents            

capital equipment in the U.S., China and Europe in the second half of 2014 was not enough to offset the softness in research in the first half and in Japan. The first half of 2014 was impacted by slow releasing budgets particularly in the U.S. and China. The diagnostics and clinical market reflected solid demand for CGH microarray and target enrichment solutions and sustained growth in pathology. Applied markets grew moderately with good demand in forensics and food boosted by increased government spending in the U.S.

Looking forward, we are optimistic about our growth opportunities in the life sciences and diagnostics markets as our broad portfolio of products and solutions are well suited to address customer needs. We continue to invest in expanding and improving our applications and solutions portfolio. We expect low spending levels to continue in life science research markets, but we expect businesses such as consumables and services and the continued need to refresh instrumentation with high sensitivity and increased throughput to partially offset this effect. We remain positive about our growth in our clinical and clinical research markets, as adoption of our SureSelect and HaloPlex sequencing target enrichment solutions continue. We expect that there will be a positive impact of approximately 1 percentage point to operating margin in fiscal year 2015 as we complete the exit of our NMR business.

Gross Margin and Operating Margin

The following table shows the life sciences and diagnostics business' margins, expenses and income from operations for 2014 versus 2013, and 2013 versus 2012.
 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
Total gross margin
54.1
%
 
54.3
%
 
53.3
%
 
 
1 ppt
Operating margin
15.8
%
 
16.4
%
 
14.8
%
 
(1) ppt
 
2 ppts
(in millions)
 
 
 
 
 
 
 
 
 
Research and development
$
244

 
$
228

 
$
195

 
7%
 
17%
Selling, general and administrative
$
664

 
$
645

 
$
567

 
3%
 
14%
Income from operations
$
376

 
$
377

 
$
295

 
 
28%

Gross margins in 2014 were relatively flat compared to 2013. Gross margins reflect favorable product mix, lower inventory charges, entirely offset by costs to address the FDA warning letter and higher infrastructure expenses and wage increases. Gross margins increased 1 percentage point in 2013 compared to 2012. The increase in gross margins was mainly due to the impact of the Dako acquisition, along with favorable volume and lower infrastructure expenses partially offset by unfavorable product mix.

Research and development expenses increased 7 percent in 2014 compared to 2013 due to greater investments in software and next generation products, higher infrastructure expenses, wage increases and higher variable pay. Research and development expenses increased 17 percent in 2013 compared to 2012. The increase was primarily due to the impact of the Dako acquisition.

Selling, general and administrative expenses increased 3 percent in 2014 compared to 2013 due to higher commissions, higher infrastructure expenses partially offset by workforce reductions. Selling, general and administrative expenses increased 14 percent in 2013 compared to 2012. The increase was primarily due to the impact of the Dako acquisition.

Operating margins decreased 1 percentage point in 2014 compared to 2013 on higher revenue offset by increased operating expenses. Our NMR business, which we made a decision to exit at the end of the fiscal year, had an unfavorable impact of approximately 2 percentage points on operating margin for fiscal year 2014. Operating margins increased by 2 percentage points in 2013 compared to 2012. The increases were mainly due to the impact of the Dako acquisition and favorable gross profit from higher revenue.

Income from Operations

Income from operations in 2014 decreased by $1 million on a revenue increase of $72 million. Income from operations in 2013 increased by $82 million or 28 percent on a revenue increase of $316 million, a 26 percent year-over-year operating margin incremental. Operating margin incremental is measured by the increase in income from operations compared to the prior period divided by the increase in revenue compared to the prior period.


44

Table of Contents            

Chemical Analysis

Our chemical analysis business provides application-focused solutions that include instruments, software, consumables, and services that enable customers to identify, quantify and analyze the physical and biological properties of substances and products. Key product categories in chemical analysis include: gas chromatography (GC) systems, columns and components; gas chromatography mass spectrometry (GC-MS) systems; inductively coupled plasma mass spectrometry (ICP-MS) instruments; atomic absorption (AA) instruments; inductively coupled plasma optical emission spectrometry (ICP-OES) instruments; molecular spectroscopy instruments; software and data systems; vacuum pumps and measurement technologies; services and support for our products.

Orders and Net Revenue

 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
 
(in millions)
 
 
 
 
Orders
$
1,747

 
$
1,642

 
$
1,604

 
6%
 
2%
Net revenue from products
$
1,292

 
$
1,232

 
$
1,219

 
5%
 
1%
Net revenue from services and other
384

 
362

 
340

 
6%
 
6%
Total net revenue
$
1,676

 
$
1,594

 
$
1,559

 
5%
 
2%

Chemical analysis orders in 2014 increased 6 percent when compared to 2013. Foreign currency movements for 2014 had an unfavorable impact of 1 percentage point compared to 2013. Order results showed positive performance in high-end gas chromatographs, spectroscopy instruments, services and consumables. Strength in these areas was offset by declines in mid-range, micro gas chromatographs and vacuum products. Geographically, orders grew 6 percent in the Americas, increased 9 percent in Europe, declined 1 percent in Japan (includes unfavorable currency impact of 11 percentage points), and grew 6 percent in Asia Pacific excluding Japan during 2014 when compared to 2013. In the Americas the performance was primarily due to the improved demand from government as well as private sector in the second half of the year. Total Asia Pacific orders reflected continued weakness in Japan orders offset by continued growth in both China and India. Chemical analysis orders in 2013 increased 2 percent compared to 2012; orders were led by positive growth in services, consumables, and ICP-MS instruments which was partially offset by declines in GC-MS systems and flat orders in vacuum pump products.

Chemical analysis revenue in 2014 increased 5 percent compared to 2013. Foreign currency movements for 2014 had an unfavorable impact of 1 percentage point compared to 2013. Revenue growth was led by strength in high-end GC’s and AA-OES instruments; this was partially offset by weakness in micro/ mid-range GC’s and vacuum products. Geographically, revenue grew 4 percent in the Americas, grew 10 percent in Europe, grew 1 percent in Japan (including a 12 percentage point unfavorable currency impact), and grew 3 percent in Asia Pacific excluding Japan over 2013. Chemical analysis revenue grew 2 percent in 2013 compared to 2012. Revenue growth was led by services and consumables. In the instruments, GC and GC-MS weaknesses were offset by strength in ICP-MS and AA-OES.

Chemical analysis saw positive growth in all the key end markets. Growth was led by food testing where the demand to export safe and high quality food in emerging markets remains strong, and improved government funding in the Americas and Europe continue to drive strength for demand of spectroscopes and high-end gas chromatograph instruments. Government spend in the developed countries has improved in the second half of the year, and is driving the growth in forensics and environmental markets. Chemical and energy end markets saw low single digit growth in 2014 compared to 2013, driven primarily by softness in the industrial markets. In forensics, the spread of designer drugs continues to drive the need for high-sensitivity testing which is positively impacting the growth of GC-MS systems, particularly in US and Japan. Environmental and food testing demand grew due to an increased regulatory environment in China and other developing economies.
 
While the economic environment still remains uncertain, the second half results of 2014 reflect a positive outlook for the chemical analysis core end markets. We will continue to invest in research and development, and seek to expand our position in developing countries and emerging markets. New instrument launches over the next twelve months, as well as continued market acceptance of our new products released in 2014 (new 5100 ICPOES, 7010 GCMS and 7200 GC Q-TOF), should help with our product differentiation and competitive position.



45

Table of Contents            

Gross Margin and Operating Margin

The following table shows the chemical analysis business's margins, expenses and income from operations for 2014 versus 2013, and 2013 versus 2012.

 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
Total gross margin
52.6
%
 
51.7
%
 
51.4
%
 
1 ppt
 
Operating margin
23.1
%
 
22.3
%
 
21.7
%
 
1 ppt
 
1 ppt
(in millions)
 
 
 
 
 
 
 
 
 
Research and development
$
102

 
$
94

 
$
93

 
8%
 
2%
Selling, general and administrative
$
393

 
$
374

 
$
371

 
5%
 
1%
Income from operations
$
387

 
$
355

 
$
338

 
9%
 
5%

Gross margins increased in 2014 almost 1 percentage point compared to 2013; unfavorable foreign currency movements, higher product discounts, and wage increases were more than offset by favorable manufacturing overhead costs and favorable revenue volume. Gross margins in 2013 were flat compared to 2012. Higher product discounts and unfavorable foreign currency movements were offset by favorable manufacturing overhead costs and favorable revenue volume.

Research and development expenses increased 8 percent in 2014 when compared to 2013; however remained flat as a percentage of revenue, as we continue to make investments in product R&D. Research and development expenses increased 2 percent in 2013 compared to 2012 driven by our continued investment in instrument products.

Selling, general and administrative expenses increased 5 percent in 2014 compared to 2013. The increase was mainly due to higher infrastructure expenses, wage increases, and higher commissions partially offset by favorable currency impact. Selling, general and administrative expenses increased 1 percent in 2013 compared to 2012, mainly due to higher infrastructure expenses and commissions partially offset by reduced discretionary expenses including marketing programs and travel.
 
Operating margins increased by 1 percentage point in 2014 compared to 2013. The increase was due to higher revenue and improved gross margins. Operating margins increased by 1 percentage point in 2013 compared to 2012.

Income from Operations

Income from operations in 2014 increased by $32 million or 9 percent compared to 2013 on a revenue increase of $82 million, a 39 percent year-over-year operating margin incremental. Income from operations in 2013 increased by $17 million or 5 percent compared to 2012 on a revenue increase of $35 million, a 49 percent year-over-year operating margin incremental.

Electronic Measurement

Our electronic measurement business provides electronic measurement instruments and systems, software design tools and related services that are used in the design, development, manufacture, installation, deployment and operation of electronics equipment, and microscopy products. Related services include start-up assistance, instrument productivity and application services and instrument calibration and repair. We also offer customization, consulting and optimization services throughout the customer's product lifecycle.

Orders and Net Revenue
 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
 
(in millions)
 
 
 
 
Orders
$
2,963

 
$
2,866

 
$
3,280

 
3%
 
(13)%
Net revenue from products
$
2,480

 
$
2,434

 
$
2,862

 
2%
 
(15)%
Net revenue from services and other
453

 
454

 
453

 
 
Total net revenue
$
2,933

 
$
2,888

 
$
3,315

 
2%
 
(13)%

46

Table of Contents            

Electronic measurement orders increased 3 percent in 2014 compared to 2013. Foreign currency movements had an unfavorable impact of 1 percentage point on the year-over-year compare. Orders increased in all market segments in 2014 compared to 2013 including aerospace and defense; industrial, computer, and semiconductor test; and communications test. On a geographic basis, orders grew 11 percent in Asia Pacific excluding Japan, 6 percent in Europe and 3 percent in the Americas compared to 2013. Japan orders declined 16 percent year-over-year, declining 9 percent year-over-year in local currency compared to 2013. Asia Pacific excluding Japan increased in all market segments. The increase in the Americas was driven by strong aerospace and defense orders. Electronic measurement orders declined 13 percent in 2013 compared to 2012. Orders were lower for all market segments, including aerospace and defense; industrial, computer, and semiconductor test; and communications test.

Electronic measurement revenues increased 2 percent in 2014 compared to 2013 with modest growth in industrial, computer and semiconductor test, and communication test partially offset by decline in the aerospace and defense revenue. Foreign currency movements had an unfavorable impact of 1 percentage point on the year-over-year compare. Revenue from Asia Pacific excluding Japan grew 8 percent driven by growth in communication test and industrials, computer and semiconductor test. Europe revenue increased 5 percent year-over-year from growth in communications test. Americas declined 3 percent year-over-year with lower aerospace and defense and communications test. Japan declined 9 percent year-over-year, with declines in all market segments. Revenue from products increased 2 percent in 2014 compared to 2013 while service related revenue was flat. Growth in calibration services and remarketing sales of used equipment were partially offset by declines in the equipment repair business due to the move from a one to three year product warranty. Electronic measurement revenue declined 13 percent in 2013 compared to 2012 primarily on lower wireless manufacturing and industrial, computer and semiconductor test demand.

General purpose test revenue, representing approximately 66 percent of electronic measurement business, increased year-over-year. Growth in industrial, computer, and semiconductor test demand was partially offset by declines in the aerospace and defense business. Aerospace and defense business, while down for the full fiscal year, had positive growth in the last two fiscal quarters. The computer and semiconductor increase was driven by investment in capacity growth and the overall strength in the semiconductor market. The industrial test business grew for the year with particular strength in the last fiscal quarter driven by growth in the Americas and Asia Pacific excluding Japan. In 2013, general purpose test revenue, representing approximately 66 percent of electronic measurement business, declined year-over-year on weak industrial, computer, and semiconductor test demand.

Communications test revenue, representing approximately 34 percent of total electronic measurement, increased year over year with increases in wireless manufacturing and broadband communications business partially offset by modest declines in Wireless R&D. Wireless manufacturing growth continues to be driven by 4G base station investments, mainly for China. Broadband showed solid growth impacted by demand for datacom bandwidth. Wireless R&D continues to be affected by cautious customer spending driven by consolidation and restructuring activities throughout the industry, across device, network equipment, chipset and component manufacturers. In 2013, communications test represented approximately 34 percent of total electronic measurement revenue. Revenue declined year-over-year due to significantly lower wireless manufacturing demand and modest declines in wireless R&D.
 
Gross Margin and Operating Margin

The following table shows the electronic measurement business's margins, expenses and income from operations for 2014 versus 2013 and 2013 versus 2012.

 
Years Ended October 31,
 
2014 over 2013
Change
 
2013 over 2012
Change
 
2014
 
2013
 
2012
 
Total gross margin
55.7
%
 
56.9
%
 
56.9
%
 
(1) ppt
 
Operating margin
19.1
%
 
18.9
%
 
22.7
%
 
 
(4) ppts
(in millions)
 
 
 
 
 
 
 
 
 
Research and development
$
358

 
$
365

 
$
375

 
(2)%
 
(3)%
Selling, general and administrative
$
717

 
$
733

 
$
761

 
(2)%
 
(4)%
Income from operations
$
559

 
$
544

 
$
751

 
3%
 
(28)%

Gross margins declined 1 percentage point in 2014 compared to 2013 on slightly higher revenue. Higher inventory charges and an increase in three year warranty costs were the primary reasons for the lower gross margins. Gross margins were flat in 2013 compared to 2012 on lower revenue. A decline in variable and incentive pay and reduced infrastructure spending were offset by higher inventory charges and wage increases.


47

Table of Contents            

 Research and development expenses declined 2 percent in 2014 compared to 2013. Reductions were the result of lower infrastructure costs. Research and development expenses declined 3 percent in 2013 compared to 2012. Reductions in development spending, variable and incentive pay, and infrastructure related expenses, and the favorable impact of currency movements were partially offset by investments in acquisitions and wage increases.

Selling, general and administrative expenses decreased 2 percent in 2014 compared to 2013. Reductions in infrastructure costs and the favorable impact of currency movements were partially offset by increases in marketing communications and travel. Selling, general and administrative expenses decreased 4 percent in 2013 compared to 2012. Reductions in discretionary spending, lower variable and incentive pay, and the favorable impact of currency movements were partially offset by wage increases.

Operating margins were flat in 2014 compared to 2013 with revenue growth offset by lower gross margins. Operating margins declined by 4 percentage points in 2013 compared to 2012 on lower revenue partially offset by reduced operating expenses.

Income from Operations

Income from operations in 2014 increased by $15 million or 3 percent compared to 2013 on a revenue increase of $45 million, a 33 percent year-over-year operating margin incremental, reflecting the impact of higher revenue and expense reductions. Income from operations in 2013 decreased by $207 million or 28 percent compared to 2012 on a revenue decrease of $427 million, a 48 percent year-over-year operating margin decrement, reflecting the net impact of lower revenue partially offset by expense reductions.

Financial Condition

Liquidity and Capital Resources

Our financial position as of October 31, 2014 consisted of cash and cash equivalents of $3,028 million as compared to $2,675 million as of October 31, 2013.

As of October 31, 2014, approximately $2,397 million of our cash and cash equivalents is held outside of the U.S. in our foreign subsidiaries. Most of the amounts held outside of the U.S. could be repatriated to the U.S. but, under current law, would be subject to U.S. federal and state income taxes, less applicable foreign tax credits. Agilent has accrued for U.S. federal and state tax liabilities on the earnings of its foreign subsidiaries except when the earnings are considered indefinitely reinvested outside of the U.S. Repatriation could result in additional material U.S. federal and state income tax payments in future years. We utilize a variety of funding strategies in an effort to ensure that our worldwide cash is available in the locations in which it is needed.

On November 1, 2014, we completed the distribution of 100% of the outstanding common shares of Keysight to Agilent stockholders who received one share of Keysight common stock for every two shares of Agilent held as of the close of business on the record date, October 22, 2014. The separation agreement provided that prior to the distribution, Keysight made a cash distribution to Agilent in an amount equal to $900 million. The distribution of such cash to Agilent was intended to be a return of capital to Agilent that ensures that Keysight had approximately $700 million of total cash immediately following distribution.

On June 21, 2012, we completed the acquisition of Dako A/S through the acquisition of 100% of the share capital of Dako A/S, a limited liability company incorporated under the laws of Denmark (“Dako”), under the share purchase agreement, dated May 16, 2012. As a result of the acquisition, Dako has become a wholly-owned subsidiary of Agilent. The consideration paid was approximately $2,143 million, $1,400 million was paid directly to the seller and $743 million was paid to satisfy the outstanding debt of Dako. Agilent funded the acquisition using existing cash. The acquisition has been accounted for in accordance with the authoritative accounting guidance and the results of Dako are included in Agilent's consolidated financial statements from the date of acquisition.

We believe our cash and cash equivalents, cash generated from operations, and ability to access capital markets and credit lines will satisfy, for at least the next twelve months, our liquidity requirements, both globally and domestically, including the following: working capital needs, capital expenditures, business acquisitions, stock repurchases, cash dividends, contractual obligations, commitments, principal and interest payments on debt, and other liquidity requirements associated with our operations.

Net Cash Provided by Operating Activities

Net cash provided by operating activities was $711 million in 2014 as compared to $1,152 million provided in 2013 and $1,228 million provided in 2012. We paid approximately net taxes of $131 million in 2014, as compared to net $110 million in taxes in 2013 and net $86 million in 2012. Operating cash flows in 2014 were impacted by pre-separation costs and separation

48

Table of Contents            

related taxes, the redemption of senior notes including payments related to accrued interest and the timing of the purchase of shares under the employee stock purchase plan.

In 2014, the change in accounts receivable used cash of $119 million, provided cash of $14 million in 2013 and provided cash of $19 million in 2012. Days' sales outstanding were 49 days in 2014, 47 days in 2013 and 47 days in 2012. The change in accounts payable provided cash of $50 million in 2014, used cash of $27 million in 2013 and used cash of $31 million in 2012. Cash used in inventory was $99 million in 2014, $100 million in 2013 and $52 million in 2012. Inventory days on-hand decreased to 106 days in 2014 compared to 118 days in 2013 and 108 days in 2012.

We contributed $30 million to our U.S. defined benefit plans in each of 2014, 2013 and 2012. We contributed $68 million, $89 million and $54 million to our non-U.S. defined benefit plans in 2014, 2013 and 2012, respectively. We contributed $1 million to our U.S. post-retirement benefit plans in 2014 and 2013, we did not contribute to our U.S. post-retirement benefit plans in 2012. Our non-U.S. defined benefit plans are generally funded ratably throughout the year. Total contributions in 2014 were $103 million or 14 percent less than 2013. Total contributions in 2013 were $120 million or 43 percent more than 2012. Our annual contributions are highly dependent on the relative performance of our assets versus our projected liabilities, among other factors. We expect to contribute approximately $41 million to our U.S. and non-U.S. defined benefit plans and zero to our U.S. post-retirement benefit plans during 2015.

Net Cash Provided by/Used in Investing Activities

Net cash used in investing activities in 2014 was $230 million and in 2013 was $248 million as compared to net cash used of $2,366 million in 2012 primarily due to the acquisition of Dako.

Investments in property, plant and equipment were $205 million in 2014, $195 million in 2013 and $194 million in 2012. Proceeds from sale of property, plant and equipment were $14 million in 2014, $2 million in 2013 and zero in 2012. In 2014 we invested $13 million in acquisitions of businesses compared to $21 million in 2013 in acquisitions of businesses and intangible assets compared to $2,257 million in 2012. In 2014, there were $25 million of purchases of equity method investments including a $3.5 million loan converted to equity compared with $46 million of purchases of investments including $21 million for equity method investments in 2013. Proceeds from the sale of investment securities in 2014 were $1 million, $12 million in 2013 and $5 million in 2012.

On April 30, 2014, Agilent entered into a binding sales contract with real estate developers to sell land in the U.K. The contract calls for proportionate transfers and payments of three separate land tracts totaling approximately $34 million in May 2014, November 2015 and November 2016. Under the authoritative accounting guidance the full accrual method will be used to account for these transactions and gains on the sales recognized at each sale and payment date. In the year ended October 31, 2014 we recognized $11 million gain on sale of land in respect of the first of three land tracts in selling, general and administrative expenses. The property transfers to Keysight at distribution and the two remaining future payments in November 2015 and November 2016 from the developers will become due to and collected by Keysight.

Net Cash Provided by/Used in Financing Activities

Net cash used in financing activities in 2014 was $97 million compared to $554 million in 2013 and $37 million in 2012, respectively.

Treasury stock repurchases

On January 16, 2013, our board of directors approved a share-repurchase program (the "2013 repurchase program"). The 2013 repurchase program authorized the use of up to $500 million to repurchase shares of the company's common stock in open market transactions. On May 14, 2013, we announced that our board of directors authorized an increase of $500 million to the 2013 repurchase program bringing the cumulative authorization to $1 billion. As of October 31, 2014, there were no remaining amounts to be repurchased under the 2013 program.

On November 22, 2013 we announced that our board of directors had authorized a new share repurchase program effective upon the conclusion of the company's $1 billion repurchase program. The new program is designed to reduce or eliminate dilution resulting from issuance of stock under the company's employee equity incentive programs to target maintaining a weighted average share count of approximately 335 million diluted shares.


49

Table of Contents            

For the year ended October 31, 2014, we repurchased 4 million shares for $200 million. For the year ended October 31, 2013, we repurchased 20 million shares for $900 million. For the year ended October 31, 2012, we repurchased 5 million shares for $172 million. All such shares and related costs are held as treasury stock and accounted for using the cost method.

Dividends

During the year ended October 31, 2014, cash dividends of $0.528 per share, or $176 million were declared and paid on the company's outstanding common stock. During the year ended October 31, 2013, cash dividends of $0.46 per share, or $156 million were declared and paid on the company's outstanding common stock. During the year ended October 31, 2012, cash dividends of $0.30 per share, or $104 million were declared and paid on the company's outstanding common stock. On November 20, 2014, we declared a quarterly dividend of $0.10 per share of common stock, or approximately $34 million which will be paid on January 28, 2015 to shareholders of record as of the close of business on January 6, 2015. The timing and amounts of any future dividends are subject to determination and approval by our board of directors.

Credit Facility

On September 15, 2014, Agilent entered into a credit agreement with a financial institution which provides for a $400 million five-year unsecured credit facility (the “Agilent Facility”) that will expire on September 15, 2019.  The Agilent Facility replaced the previous credit facility (“old credit facility”) and provides for amounts to be borrowed for general corporate purposes. For the year ended October 31, 2014, we borrowed $50 million under the old credit facility and repaid $50 million by October 31, 2014. As of October 31, 2014 the company has no borrowings outstanding under the Agilent facility. We were in compliance with the covenants for the credit facilities during the year ended October 31, 2014.

On September 15, 2014, Keysight, a wholly owned subsidiary of Agilent, entered into a credit agreement with a financial institution which provides for a $300 million five-year unsecured credit facility (the “Keysight Facility”) that will expire on November 1, 2019 and provides for amounts to be borrowed for general corporate purposes. The credit agreement was initially guaranteed by Agilent. The guarantee terminated upon the completion of the separation of Keysight from Agilent on November 1, 2014. As of October 31, 2014 the company has no borrowings outstanding under the Keysight facility. We were in compliance with the covenants for the credit facility during the year ended October 31, 2014.

As a result of the Dako acquisition, we have a credit facility in Danish Krone equivalent of $9 million with a Danish financial institution. As of October 31, 2014 the company had no borrowings outstanding under the facility.

Short-term Loan

On July 10, 2014, a wholly owned subsidiary of Agilent in India entered into a short-term loan agreement with a financial institution, which provides up to $50 million of unsecured borrowings. On July 25, 2014, we borrowed $35 million against the loan agreement at an interest rate of 9.95 percent per annum. The loan was repaid during the year and as of October 31, 2014, no balance was outstanding against this credit facility.

Long-term debt

On July 14, 2014, we settled the redemption of the outstanding aggregate principal amount of our 5.5% senior notes (“2015 senior notes”) due September 14, 2015, that had been called for redemption on June 12, 2014. The redemption price of approximately $528 million included the $500 million principal amount and a $28 million prepayment penalty. The prepayment penalty less full amortization of previously deferred interest rate swap gain of approximately $8 million together with $1 million of amortization of debt issuance costs and discount was disclosed in other income (expense), net in the condensed consolidated statement of operations. The amortization of the interest rate swap gain has been recognized as an adjustment to reconcile net income to net cash provided by operating activities in the condensed consolidated statement of cash flows. We also paid accrued and unpaid interest of $9 million on the 2015 senior notes up to but not including the redemption date.

In October 2007, the company issued an aggregate principal amount of $600 million in senior notes ("2017 senior notes"). The 2017 senior notes were issued at 99.60% of their principal amount. The notes will mature on November 1, 2017, and bear interest at a fixed rate of 6.50% per annum. The interest is payable semi-annually on May 1st and November 1st of each year and payments commenced on May 1, 2008.

On November 25, 2008, we terminated two interest rate swap contracts associated with our 2017 senior notes that represented the notional amount of $400 million. The asset value, including interest receivable, upon termination was approximately $43

50

Table of Contents            

million and the amount to be amortized at October 31, 2014 was $3 million. The gain is being deferred and amortized to interest expense over the remaining life of the 2017 senior notes.

On October 20, 2014, we settled the redemption of $500 million of the $600 million outstanding aggregate principal amount of our 6.5% senior notes ("2017 senior notes") due November 1, 2017 that had been called for redemption on September 19, 2014. The redemption price of approximately $580 million included a $80 million prepayment penalty computed in accordance with the terms of the 2017 senior notes as the present value of the remaining scheduled payments of principal and unpaid interest related to $500 million partial redemption. The prepayment penalty less partial amortization of previously deferred interest rate swap gain of approximately $14 million together with $2 million of amortization of debt issuance costs and discount was disclosed in other income (expense), net in the condensed consolidated statement of operations. We also paid accrued and unpaid interest of $15 million on the 2017 senior notes up to but not including the redemption date.

In July 2010, the company issued an aggregate principal amount of $500 million in senior notes ("2020 senior notes"). The 2020 senior notes were issued at 99.54% of their principal amount. The notes will mature on July 15, 2020, and bear interest at a fixed rate of 5.00% per annum. The interest is payable semi-annually on January 15th and July 15th of each year, payments commenced on January 15, 2011.

On August 9, 2011, we terminated our interest rate swap contracts related to our 2020 senior notes that represented the notional amount of $500 million. The asset value, including interest receivable, upon termination for these contracts was approximately $34 million and the amount to be amortized at October 31, 2014 was $22 million. The gain is being deferred and amortized to interest expense over the remaining life of the 2020 senior notes.

In September 2012, the company issued an aggregate principal amount of $400 million in senior notes ("2022 senior notes"). The senior notes were issued at 99.80% of their principal amount. The notes will mature on October 1, 2022, and bear interest at a fixed rate of 3.20% per annum. The interest is payable semi-annually on April 1st and October 1st of each year, payments commenced on April 1, 2013.

In June 2013, the company issued aggregate principal amount of $600 million in senior notes ("2023 senior notes"). The 2023 senior notes were issued at 99.544% of their principal amount. The notes will mature on July 15, 2023 and bear interest at a fixed rate of 3.875% per annum. Interest is payable semi-annually on January 15th and July 15th of each year and payments commenced January 15, 2014.

On October 6, 2014 Keysight announced that it had agreed to sell $500 million of 3.30% senior notes due 2019 ("2019 senior notes") and $600 million of 4.55% senior notes due 2024 ("2024 senior notes"). The transaction closed on October 15, 2014. Each series of notes initially were guaranteed on an unsecured, unsubordinated basis by Agilent. The guarantees terminated upon the completion of the separation of Keysight from Agilent on November 1, 2014.
 
As of October 31, 2014, and as a result of the Dako acquisition, we have mortgage debts, secured on buildings in Denmark, in Danish Krone equivalent of $42 million aggregate principal outstanding with a Danish financial institution. The loans have a variable interest rate based on 3 months Copenhagen Interbank Rate ("Cibor") and will mature on September 30, 2027. Interest payments are made in March, June, September and December of each year.
 
Off Balance Sheet Arrangements and Other

We have contractual commitments for non-cancelable operating leases. See Note 17 "Commitments and Contingencies", to our consolidated financial statements for further information on our non-cancelable operating leases.

Our liquidity is affected by many factors, some of which are based on normal ongoing operations of our business and some of which arise from fluctuations related to global economics and markets. Our cash balances are generated and held in many locations throughout the world. Local government regulations may restrict our ability to move cash balances to meet cash needs under certain circumstances. We do not currently expect such regulations and restrictions to impact our ability to pay vendors and conduct operations throughout our global organization.

Contractual Commitments

Our cash flows from operations are dependent on a number of factors, including fluctuations in our operating results, accounts receivable collections, inventory management, and the timing of tax and other payments. As a result, the impact of contractual obligations on our liquidity and capital resources in future periods should be analyzed in conjunction with such factors.


51

Table of Contents            

The following table summarizes our total contractual obligations at October 31, 2014 for Agilent operations and excludes amounts recorded in our consolidated balance sheet (in millions):

 
Less than one
year
 
One to three years
 
Three to five years
 
More than five years
Operating leases
$
57

 
$
81

 
$
35

 
$
33

Commitments to contract manufacturers and suppliers
782

 
8

 

 

Other purchase commitments
127

 

 

 

Retirement plans
87

 

 

 

Total
$
1,053

 
$
89

 
$
35

 
$
33


We expect that with the separation of Keysight from Agilent on November 1, 2014 that operating lease payments will be reduced by approximately $52 million in total for the periods presented. We also expect the transfer of approximately one quarter of the commitments to contract manufacturers and suppliers and other purchase commitments to Keysight at separation. In addition, our commitments under the retirement plans are expected to reduce by approximately $46 million with separation of Keysight. We do not expect a material adverse change in the effect these arrangements and obligations will have on our liquidity.

Operating leases.    Commitments under operating leases relate primarily to leasehold property, see Note 17, "Commitments and Contingencies".

Commitments to contract manufacturers and suppliers.    We purchase components from a variety of suppliers and use several contract manufacturers to provide manufacturing services for our products. During the normal course of business, we issue purchase orders with estimates of our requirements several months ahead of the delivery dates. However, our agreements with these suppliers usually provide us the option to cancel, reschedule, and adjust our requirements based on our business needs prior to firm orders being placed. Typically purchase orders outstanding with delivery dates within 30 days are non-cancelable. Therefore, only approximately 53 percent of our reported purchase commitments arising from these agreements are firm, non-cancelable, and unconditional commitments. We expect to fulfill most of our purchase commitments for inventory within one year.

In addition to the above mentioned commitments to contract manufacturers and suppliers, we record a liability for firm, non-cancelable and unconditional purchase commitments for quantities in excess of our future demand forecasts consistent with our policy relating to excess inventory. As of October 31, 2014, the liability for our firm, non-cancelable and unconditional purchase commitments was $15 million, compared to $5 million as of October 31, 2013 and 2012. These amounts are included in other accrued liabilities in our consolidated balance sheet. The increase when compared to the previous year was largely due to the previous commitment undertaken with suppliers to the NMR business which we are exiting.

Other purchase commitments.    We have categorized "other purchase commitments" related to contracts with professional services suppliers. Typically we can cancel these contracts within 90 days without penalties. For those contracts that are not cancelable within 90 days without penalties, we are disclosing the amounts we are obligated to pay to a supplier under each contract in that period before such contract can be cancelled. Our contractual obligations with these suppliers under "other purchase commitments" were approximately $127 million within the next year. The increase in other purchase commitments compared with a year ago is partially due to additional contracts associated with our pre-separation costs and the duplication of a number of contracts related to the separation activities of Keysight.

Retirement Plans.    Commitments under the retirement plans relate to expected contributions to be made to our U.S. and non-U.S. defined benefit plans and to our post-retirement medical plans for the next year only. Contributions after next year are impractical to estimate.

We had no material off-balance sheet arrangements as of October 31, 2014 or October 31, 2013.


52

Table of Contents            

On Balance Sheet Arrangements

The following table summarizes our total contractual obligations at October 31, 2014 related to our long-term debt and interest expense (in millions):

 
Less than one
year
 
One to three years
 
Three to five years
 
More than five years
Senior notes
$

 
$

 
$
600

 
$
2,100

Other debt

 

 

 
42

Interest expense
114

 
227

 
210

 
298

Total
$
114

 
$
227

 
$
810

 
$
2,440


In connection with the separation of Keysight from Agilent on November 1, 2014, our obligations for long-term debt are expected to decrease by $1,100 million and interest payments are expected to decrease by approximately $359 million.

Other long-term liabilities include $289 million and $341 million of liabilities for uncertain tax positions as of October 31, 2014 and October 31, 2013, respectively. We are unable to accurately predict when these amounts will be realized or released. However, it is reasonably possible that there could be significant changes to our unrecognized tax benefits in the next twelve months due to either the expiration of a statute of limitations or a tax audit settlement.

53

Table of Contents            

Item 7A.    Quantitative and Qualitative Disclosures About Market Risk

We are exposed to foreign currency exchange rate risks inherent in our sales commitments, anticipated sales, and assets and liabilities denominated in currencies other than the functional currency of our subsidiaries. We hedge future cash flows denominated in currencies other than the functional currency using sales forecasts up to twelve months in advance. Our exposure to exchange rate risks is managed on an enterprise-wide basis. This strategy utilizes derivative financial instruments, including option and forward contracts, to hedge certain foreign currency exposures with the intent of offsetting gains and losses that occur on the underlying exposures with gains and losses on the derivative contracts hedging them. We do not currently and do not intend to utilize derivative financial instruments for speculative trading purposes.

Our operations generate non-functional currency cash flows such as revenues, third party vendor payments and inter-company payments. In anticipation of these foreign currency cash flows and in view of volatility of the currency market, we enter into such foreign exchange contracts as are described above to manage our currency risk. Approximately 61 percent of our revenues in 2014, 63 percent of our revenues in 2013 and 63 percent of our revenues in 2012 were generated in U.S. dollars.

We performed a sensitivity analysis assuming a hypothetical 10 percent adverse movement in foreign exchange rates to the hedging contracts and the underlying exposures described above. As of October 31, 2014 and 2013, the analysis indicated that these hypothetical market movements would not have a material effect on our consolidated financial position, results of operations, statement of comprehensive income or cash flows.

We are also exposed to interest rate risk due to the mismatch between the interest expense we pay on our loans at fixed rates and the variable rates of interest we receive from cash, cash equivalents and other short-term investments. We have issued long-term debt in U.S. dollars or foreign currencies at fixed interest rates based on the market conditions at the time of financing. We believe that the fair value of our fixed rate debt changes when the underlying market rates of interest change, and we may use interest rate swaps to modify such market risk.

We performed a sensitivity analysis assuming a hypothetical 10 percent adverse movement in interest rates relating to the underlying fair value of our fixed rate debt. As of October 31, 2014 and 2013, the sensitivity analyses indicated that a hypothetical 10 percent adverse movement in interest rates would result in an immaterial impact to the fair value of our fixed interest rate debt.

54

Table of Contents            


Item 8.    Financial Statements and Supplementary Data

Index to Consolidated Financial Statements
 
Page
 
 
 
Consolidated Financial Statements:
 
 
 
 
 
 
 
 
 
 


55

Table of Contents            


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors of Agilent Technologies, Inc.:

In our opinion, the consolidated financial statements listed in the index appearing under Item 8 present fairly, in all material respects, the financial position of Agilent Technologies, Inc. and its subsidiaries at October 31, 2014 and October 31, 2013, and the results of their operations and their cash flows for each of the three years in the period ended October 31, 2014 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of October 31, 2014, based on criteria established in Internal Control - Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management's Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company's internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

As discussed in Note 1 to the consolidated financial statements, on November 1, 2014, the Company distributed all of the outstanding shares of Keysight Technologies, Inc., which encompasses the Company’s electronic measurement business, to the Company’s shareholders.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.



/s/ PRICEWATERHOUSECOOPERS LLP
 
 
 
San Jose, California
 
December 22, 2014
 

56

Table of Contents            


AGILENT TECHNOLOGIES, INC.
CONSOLIDATED STATEMENT OF OPERATIONS
 
Years Ended October 31,
 
2014
 
2013
 
2012
 
(in millions, except per
share data)
Net revenue:
 
 
 
 
 
Products
$
5,686

 
$
5,534

 
$
5,659

Services and other
1,295

 
1,248

 
1,199

Total net revenue
6,981

 
6,782

 
6,858

Costs and expenses:
 
 
 
 
 
Cost of products
2,673

 
2,576

 
2,608

Cost of services and other
715

 
671

 
646

Total costs
3,388

 
3,247

 
3,254

Research and development
719

 
704

 
668

Selling, general and administrative
2,043

 
1,880

 
1,817

Total costs and expenses
6,150

 
5,831

 
5,739

Income from operations
831

 
951

 
1,119

Interest income
9

 
7

 
9

Interest expense
(113
)
 
(107
)
 
(101
)
Other income (expense), net
(81
)
 
8

 
16

Income before taxes
646

 
859

 
1,043

Provision (benefit) for income taxes
142

 
135

 
(110
)
Net income
$
504

 
$
724

 
$
1,153

Net income per share:
 
 
 
 
 
Basic
$
1.51

 
$
2.12

 
$
3.31

Diluted
$
1.49

 
$
2.10

 
$
3.27

Weighted average shares used in computing net income per share:
 
 
 
 
 
Basic
333

 
341

 
348

Diluted
338

 
345

 
353

 
 
 
 
 
 
Cash dividends declared per common share
$
0.528

 
$
0.46

 
$
0.30

   
The accompanying notes are an integral part of these consolidated financial statements.

57

Table of Contents            

AGILENT TECHNOLOGIES, INC.
CONSOLIDATED STATEMENT OF COMPREHENSIVE INCOME
(in millions)


 
Years Ended October 31,
 
2014
 
2013
 
2012
 
 
 
 
 
 
 
 
Net income
$
504

 
$
724

 
$
1,153

 
Other comprehensive income (loss):

 

 

 
Unrealized gain on investments, net of tax (expense) benefit of $(1), $(2) and $8
11

 
7

 
6

 
Amounts reclassified into earnings related to investments, net of tax of $0, $0 and $0
(1
)
 

 

 
Gain on derivative instruments, net of tax (expense) of $(5), $(2) and $(3)
8

 
8

 
7

 
Amounts reclassified into earnings related to derivative instruments, net of tax benefit of $0, $3 and $2
1

 
(10
)
 
(6
)
 
Foreign currency translation, net of tax benefit of $8, $8 and $0
(269
)
 
1

 
(28
)
 
Net defined benefit pension cost and post retirement plan costs:

 

 

 
Change in actuarial net loss, net of tax (expense) benefit of $65, $(114), and $61
(143
)
 
228

 
(175
)
 
Change in net prior service benefit, net of tax benefit of $16, $16, and $17
(32
)
 
(32
)
 
(31
)
 
Other comprehensive income (loss)
(425
)
 
202

 
(227
)
 
Total comprehensive income
$
79

 
$
926

 
$
926

 

The accompanying notes are an integral part of these condensed consolidated financial statements.


58

Table of Contents            

AGILENT TECHNOLOGIES, INC.
CONSOLIDATED BALANCE SHEET
 
October 31,
 
2014
 
2013
 
(in millions, except
par value and
share data)
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
3,028

 
$
2,675

Accounts receivable, net
983

 
899

Inventory
1,072

 
1,066

Other current assets
417

 
343

Total current assets
5,500

 
4,983

Property, plant and equipment, net
1,101

 
1,134

Goodwill
2,899

 
3,047

Other intangible assets, net
667

 
916

Long-term investments
159

 
139

Other assets
505

 
467

Total assets
$
10,831

 
$
10,686

LIABILITIES AND EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
475

 
$
432

Employee compensation and benefits
395

 
401

Deferred revenue
435

 
439

Other accrued liabilities
397

 
330

Total current liabilities
1,702

 
1,602

Long-term debt
2,762

 
2,699

Retirement and post-retirement benefits
422

 
294

Other long-term liabilities
644

 
802

Total liabilities
5,530

 
5,397

Commitments and contingencies (Note 17)


 


Total equity:
 
 
 
Stockholders' equity:
 
 
 
Preferred stock; $0.01 par value; 125 million shares authorized; none issued and outstanding

 

Common stock; $0.01 par value; 2 billion shares authorized; 608 million shares at October 31, 2014 and 602 million shares at October 31, 2013 issued
6

 
6

Treasury stock at cost; 273 million shares at October 31, 2014 and 269 million shares at October 31, 2013
(9,807
)
 
(9,607
)
Additional paid-in-capital
8,967

 
8,723

Retained earnings
6,466

 
6,073

Accumulated other comprehensive income (loss)
(334
)
 
91

Total stockholders' equity
5,298

 
5,286

Non-controlling interest
3

 
3

Total equity
5,301

 
5,289

Total liabilities and equity
$
10,831

 
$
10,686

   The accompanying notes are an integral part of these consolidated financial statements.

59

Table of Contents            

AGILENT TECHNOLOGIES, INC.
CONSOLIDATED STATEMENT OF CASH FLOWS
 
Years Ended October 31,
 
2014
 
2013
 
2012
 
(in millions)
Cash flows from operating activities:
 
 
 
 
 
Net income
$
504

 
$
724

 
$
1,153

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
384

 
372

 
301

Accelerated amortization of interest rate swap gain (due to early redemption of debt)
(22
)
 

 

Share-based compensation
96

 
85

 
74

Excess tax benefit from share-based plans
(1
)
 
(2
)
 

Deferred taxes
(132
)
 
31

 
(158
)
Excess and obsolete inventory and inventory related charges
79

 
48

 
30

Non-cash restructuring and asset impairment charges
23

 
3

 
1

Net gain on sale of investments
(1
)
 
(1
)
 
(4
)
Net (gain) loss on sale of assets and divestitures
(10
)
 
3

 
2

Other
10

 
3

 
5

Changes in assets and liabilities:
 
 
 
 
 
Accounts receivable, net
(119
)
 
14

 
19

Inventory
(99
)
 
(100
)
 
(52
)
Accounts payable
50

 
(27
)
 
(31
)
Employee compensation and benefits
9

 
16

 
(54
)
Other assets and liabilities
(60
)
 
(17
)
 
(58
)
Net cash provided by operating activities
711

 
1,152

 
1,228

Cash flows from investing activities: