UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549


FORM 10-K

x                                ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended September 30, 2006

OR

o                                   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                      to                     .

Commission File No. 0-31157


INNOVATIVE SOLUTIONS AND SUPPORT, INC.

(Exact name of registrant as specified in its charter)

Pennsylvania

 

23-2507402

(State or other jurisdiction of incorporation)

 

(IRS Employer Identification No.)

720 Pennsylvania Drive, Exton, Pennsylvania

 

19341

(Address of principal executive offices)

 

(Zip Code)

 

(610) 646-9800

(Registrant’s telephone number, including area code)


Securities registered pursuant to Section 12(b) of the Act:

Title of each class:

 

Name of each exchange on which registered

Common Stock par value $.001 per share

 

NASDAQ National Market

 

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o  No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act  Yes o  No x

Note: Checking the above box will not relieve any registrant required to file reports pursant to section 13 or section 15(d) of the Exchange Act from their obligations under those sections.

Indicate by check mark whether registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o

 

Accelerated filer x

 

Non-accelerated filer o

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o  No x

The aggregate market value of the Registrant’s common stock held by non-affiliates of the Registrant as of March 31, 2006 (the last business day of the registrant’s most recently completed second quarter) was approximately $99 million. Shares of common stock held by each executive officer and director and by each person who owns 10% or more of our outstanding common stock have been excluded since such persons may be deemed affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of December 1, 2006, there were 16,818,886 outstanding shares of the Registrant’s Common Stock

Documents Incorporated by Reference

Portions of the Registrant’s Proxy Statement for the 2007 Annual Meeting of Shareholders to be filed prior to February 8, 2007 are incorporated by reference into Part III of this Report. Such Proxy Statement, except for the parts therein which have been specifically incorporated by reference, shall not be deemed “filed” for the purposes of this Report on Form 10-K.

 




INNOVATIVE SOLUTIONS AND SUPPORT, INC.
2006 Annual Report on Form 10-K
Table of Contents

 

 

 

 

Page

 

Part I

 

 

 

Item 1.

 

Business

 

3

 

Item 1A.

 

Risk Factors

 

12

 

Item 1B.

 

Unresolved Staff Comments

 

17

 

Item 2.

 

Properties

 

17

 

Item 3.

 

Legal Proceedings

 

17

 

Item 4.

 

Submission of Matters to a Vote of Security Holders

 

17

 

Part II

 

 

 

Item 5.

 

Market for the Registrant’s Common Equity and Related Shareholder Matters

 

18

 

Item 6.

 

Selected Financial Data

 

19

 

Item 7.

 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

20-26

 

Item 7A.

 

Quantitative and Qualitative Disclosures About Market Risk

 

26

 

Item 8.

 

Financial Statements and Supplementary Data

 

27-45

 

Item 9.

 

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

45

 

Item 9A.

 

Controls and Procedures

 

46

 

Part III

 

 

 

Item 10.

 

Directors and Executive Officers of the Registrant

 

49

 

Item 11.

 

Executive Compensation

 

49

 

Item 12.

 

Security Ownership of Certain Beneficial Owners and Management

 

49

 

Item 13.

 

Certain Relationships and Related Transactions

 

49

 

Item 14.

 

Principal Accounting Fees and Services

 

49

 

Part IV

 

 

 

Item 15.

 

Exhibits, Financial Statement Schedules and Reports on Form 8-K

 

50

 

 

1




FORWARD LOOKING STATEMENTS

This report contains forward looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934. We have based these forward looking statements largely on our current expectations and projections about future events and trends affecting our business. In this report, the words “believe,” “may,” “will,” “estimate,” “continue,” “anticipate,” “intend,” “forecast,” “expect,” “plan,” “should,” “is likely” and similar expressions, as they relate to our business or our management, are intended to identify forward looking statements, but they are not exclusive means of identifying them.

The forward looking statements in this report are only predictions and actual events or results may differ materially. In evaluating such statements, a number of risks, uncertainties and other factors could cause our actual results, performance, financial condition, cash flows, prospects and opportunities to differ materially from those expressed in, or implied by, the forward-looking statements. These risks, uncertainties and other factors include those set forth in Item 1A (Risk Factors) of this Annual Report on Form 10-K.

Except as expressly required by the federal securities laws, we undertake no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise after the date of this report. Our results of operations in any past period should not be considered indicative of the results to be expected for future periods. Fluctuations in operating results may also result in fluctuations in the price of our common stock.

2




PART I

Item 1.                        Business

Overview

Innovative Solutions and Support, Inc. (the “Company,” “IS&S” or “We”) was founded in 1988. The Company designs, manufactures and sells Flat Panel Display Systems, Flight Information Computers and advanced monitoring systems to the Department of Defense (DoD), government agencies, defense contractors, commercial air transport carriers, original equipment manufacturers (OEMs), and the corporate/general aviation markets. The Company is increasingly positioning itself as a system integrator; this capability provides the Company with the potential to generate more substantive orders over a broader product base. The Company has demonstrated the ability to incorporate added functionality such as electronic flight bags, charting, mapping and synthetic vision systems into its Flat Panel Display Systems’ product line. Our strategy as both a manufacturer and integrator is to leverage the latest technologies developed for the personal computer and telecommunications industries into advanced, cost-effective solutions for both the aviation industry and DoD. We believe this approach, combined with our industry experience, enables us to develop high-quality products and systems, substantially reduce product time to market and achieve cost advantages over the products offered by our competitors.

Through fiscal year 2005, the Company has focused efforts on developing and marketing air data systems that measure, calculate and display critical flight information, such as airspeed and altitude, and instruments that measure engine and fuel data. As a result, a substantial portion of our revenues in prior fiscal years, including 2005, have been from the sale of air data systems. These systems bring aircraft into compliance with certain government regulations, including Reduced Vertical Separation Minimum (RVSM) requirements that were phased in by regulatory authorities on all heavily traveled global flight routes.

For several years the Company has also been working with advances in technology that have the potential to provide pilots increasing amounts of information that will enhance both the safety and efficiency of flying. These advances have come together in the Company’s COCKPIT/IP™ (Cockpit Information Portal) or Flat Panel Display System product line that incorporates proprietary technology, low cost, reduced power consumption and weight as well as diverse functionality. The Company’s Flat Panel Display System product line is suited to address what we believe to be market demand that we believe will be driven by regulatory mandates, new technologies and aging equipment on airplanes that have been in service for up to fifty years. We believe that the transition to Flat Panel Display Systems as part of airplane retrofit requirements is underway.

In fiscal 2004 the COCKPIT/IP™ product line was significantly advanced when the Federal Aviation Administration (FAA) awarded the Company a Technical Standard Order (TSO) for the Company’s large Flat Panel Display. The TSO establishes the product as meeting the requirements that have been implemented by the FAA to ensure safe flight on a variety of aircraft types. The TSO awarded to the Company addresses the most stringent Commercial Air Transport Market requirements as provided in Title 14 of the Code of Federal Regulation, subpart 25, Commercial Air Transport.

In fiscal 2005 the Company received several key Flat Panel Display System awards. The Royal Netherlands Air Force selected our Flat Panel Display System for their KC-10 cockpit avionics update program. In addition, the Company teamed with ABX Air to upgrade B-767 cockpits with our Flat Panel Display Systems; several B-767’s were upgraded with our Primary Flight and Navigation Flat Panel Display System. The first B-767 FPDS received FAA TSO Approval and STC Certification on 10/19/05. We also captured C-130 Flat Panel Engine Instrument Display System awards from Lockheed Martin and Spar Aerospace for international customers. Further, Marshalls of Cambridge, a well respected European systems integrator, selected the Company for its common core avionics upgrade featuring our Flat Panel

3




Display System. The Canadian Department of National Defense also selected our Flat Panel Display System to retrofit their fleet of C-130 airplanes as did Snow Aviation, an international engineering integrator.

In fiscal 2006 the Flat Panel Display System product line continued to expand in terms of both FAA certifications and additional customer orders. The FAA awarded the Company two new Technical Standard Orders (TSO’s) and two new Supplemental Type Certificates (STC’s) for 15” and 10” Flat Panel Display System installations on Pilatus PC-12 airplanes. The Company also received orders from two Pilatus distributors for 15” installations. Further, Kalitta Air placed an order with the Company for Flat Panel Engine Instrument Display Systems (FP/EIDS) for B-747 retrofit applications. FAA certification relating to this display application is in process. Also, Marshalls of Cambridge, who last year chose us as their common core avionics upgrade, placed their first order with us this year. Their initial award was for C-130 retrofits. Jet Partners order for B-737 Flat Panel Display Systems was particularly significant because of the potential associated with the 3,500 Classic B-737 airplanes in operation.

Fiscal 2006 also saw demand for air data products, particularly from the DOD as evidenced by a significant order for Digital Air data Computers. Our Air Data business is expected to continue although at reduced levels from the peak demand experienced in fiscal 2005.

Our Industry

A wide range of information, including airspeed and altitude, is critical for the proper and safe operation of aircraft. With advances in technology, new types of information to assist pilots, such as satellite based weather and ground terrain maps, are becoming available for display in cockpits. We believe that aircraft cockpits will increasingly become information centers, capable of delivering additional information that is either mandated by regulation or demanded by pilots to assist in safe and efficient operation of aircraft.

There are three general types of flight data: Flight critical aircraft control data, aircraft heading and altitude data and navigation data. Flight critical aircraft control information such as air data includes aircraft speed, altitude and rates of ascent and descent. Aircraft heading and altitude information includes engine data such as fuel and oil quantity and other engine measurements, and navigation data includes radio position, flight management, GPS and alternative source information, which is information not originating on the aircraft, including weather depiction maps, GPS navigation and surface terrain maps. Air data calculations are based primarily on air pressure measurements derived from sensors on the aircraft. Engine data are determined by measuring various indices such as temperature, volume, RPM and pressure within an aircraft’s engines and other mechanical equipment. Alternative source information is typically derived from satellites or equipment located on land and fed by satellite or radio signals to the aircraft. Pilots can then display this information in the cockpit for reference and enhanced position awareness.

Traditionally, flight data and other cockpit information were displayed on a series of separate analog dials. In the early 1980s, digital displays using cathode ray tubes began to replace some of the individual analog displays. The industry has now begun to develop color flat panel displays using active matrix liquid crystal displays (AMLCD) to replace traditional analog or digital displays. We expect that the ability to display more information in a space-efficient and customized platform will become increasingly important if additional information, such as weather depiction maps, traffic information and surface terrain maps, become mandated by regulation or demanded by pilots. Accordingly, we believe that flat panel displays, which can integrate and display a “suite” of information, will increasingly replace individual displays as the method for delivering and ordering information displayed in cockpits.

4




Flat Panel Displays

Air data and other flight information were traditionally displayed on analog instrumentation and, more recently, individual small digital displays. Within the last several years, color flat panel displays were introduced in aircraft cockpits. Flat panel displays are LCD screens that can replicate the display of one or a suite of analog or digital displays on one screen. Like other instrumentation, flat panel displays can be installed in new aircraft or used to replace existing displays in aircraft already in use. LCDs are also being used for security monitoring on-board aircraft and as tactical workstations on military aircraft. The flat panel product line also presents numerous advantages for presentation of engine performance data.

Engine and Fuel Displays

Equipment data, such as engine and fuel related data, were traditionally displayed on conventional solid-state displays. Engine and fuel displays provide information on engine activity, including oil and hydraulic pressures and temperature. This instrumentation includes individual and multiple displays clustered throughout an aircraft’s cockpit. Engine and fuel displays tend to be replaced more frequently than other displays due to increased obsolescence problems and normal wear-and-tear. As the information displayed by this instrumentation is vital for safe and efficient flight, aircraft operators continue to purchase individual conventional engine and fuel displays to replace older or non-functioning displays. Increasingly, operators are beginning to replace their individual instruments with integrated Flat Panel Display Systems.

Strategy

Our objective is to become a leading supplier and integrator of cockpit information. We believe our industry experience and reputation, our technology and products and our business strategy provide a basis to achieve this objective. Key elements of our strategy include:

·       Maintaining our leadership in the air data markets.   We believe that we are one of the largest suppliers of air data products to the U.S. retrofit market. Significant demand remains in retrofitting aging aircraft with newer, more advanced and more supportable air data systems.

·       Establishing leadership in the flat panel display market.   We expect that over the next several years, many aircraft will either be retrofitted or newly manufactured with flat panel displays. Given the versatility, visual appeal and lower cost of displaying a series of instruments and other flight-relevant information on a single flat panel, we believe that flat panel displays will increasingly replace individual analog and digital instruments. We also believe our COCKPIT/IP™ has significant benefits over the flat panel displays currently offered by our competitors, including its lower cost, larger size and enhanced viewing angles. Accordingly, we believe these advantages will allow us to generate significant revenues from our COCKPIT/IP™ and gain significant market share.

·       Continuing our engineering and product development successes.   We developed innovative products by combining our avionics, engineering and design expertise with commercially available technologies, components and products from non-aviation applications, including the personal computer and telecommunications industries. We believe our processes allow us to bring products to market quickly and to control our development costs. Our COCKPIT/IP™ is an example of our ability to engineer a superior product through the selective application of non-avionic technology.

·       Increasing our sales to the DoD, other government agencies, defense contractors, commercial air transport and corporate/general aviation markets.   We strengthened efforts to diversify our sales to include all end user markets of the aviation industry, particularly legacy military aircraft programs and the commercial air transport market. This includes national and regional carriers and other

5




fleet operators, the corporate/general aviation market, primarily through aircraft modification centers, and the OEM market. We continue to build a sales and marketing force dedicated to expanding our sales efforts to these markets while at the same time maintaining our position as a provider of avionics products for the DoD.

·       Expanding our international presence.   We plan to increase our international sales by adding sales and marketing personnel and foreign offices. As large flat panel displays become more prevalent throughout the world, we believe that European and other international aircraft operators and aircraft modification centers will accelerate their retrofitting activities, thereby increasing the demand for large flat panel displays.

·       Growth through acquisitions or joint ventures.   We may pursue strategic acquisitions or joint ventures as a means of growing our business with respect to both information management products and content. We have identified profiles of the types of companies we would like to acquire and are evaluating various potential forms of joint ventures. We may seek to acquire developers or suppliers of complementary products, technology or information, or we may acquire suppliers of similar products as a means of increasing our product offerings and market share.

Our Products

Our current line of products includes:

Flat Panel Display Systems

We developed a Flat Panel Display System that can replace conventional analog and digital displays currently used in a cockpit and can display additional information that is not now commonly displayed in the cockpit. Our Cockpit Information Portal COCKPIT/IP™ is capable of displaying nearly all types of air data, engine and fuel data, altitude, heading and navigational data and alternative source information. As technology and information delivery systems further develop, additional information, such as surface terrain maps and data link messaging, will be displayed in the cockpit. We designed our COCKPIT/IP™ to be capable of displaying information generated from a variety of sources, including our RVSM air data system, engine and fuel instrumentation and third-party data and information products.

In 2004, the Federal Aviation Administration (FAA) awarded the Company a Technical Standard Order (TSO) for the flat panel display or COCKPIT/IP™. The TSO establishes that our flat panel display meets FAA requirements that have been put in place to ensure safe flight on a variety of aircraft types. The TSO awarded to the Company addresses the most stringent Commercial Air Transport Market requirements as provided in Title 14 of the Code of Federal Regulation, subpart 25, Commercial Air Transport.

The Royal Netherlands Air Force selected our Flat Panel System for their KC-10 cockpit avionics update program. The Company also teamed with ABX Air to upgrade B-767 cockpits with our Flat Panel Display Systems; the first B-767 was upgraded with our Primary Flight and Navigation Flat Panel Display System. We also received C-130 Flat Panel Engine Instrument Display System awards from Lockheed Martin and Spar Aerospace for international customers. Further, Marshalls of Cambridge, a well respected European systems integrator, selected the Company for its common core avionics upgrade featuring our Flat Panel Display System. The Canadian Department of National Defense also selected our Flat Panel Display System to retrofit their fleet of C-130 airplanes, as did Snow Aviation, an international engineering integrator.

6




On October 19, 2005 the FAA awarded the Company a second TSO for our flat panel display or COCKPIT/IP™. This TSO also establishes that our flat panel display system meets FAA requirements that have been put in place to ensure safe flight on a variety of aircraft types. This TSO also addresses the most stringent Commercial Air Transport Market requirements as provided in Title 14 of the Code of Federal Regulation, subpart 25, Commercial Air Transport. The STC states “It has been noted that this display system employs an integrity monitoring system that assures integrity to a catastrophic/Level A design condition with the use of commercial graphic processors.”

In October 2005, the Company in a teaming arrangement with ABX Air received FAA Supplemental Type Certification (STC) of its Flat Panel Display System for use on B-767 aircraft. ABX Air provided the aircraft and turnkey services, including installation kits, labor, pilot training and technical manual updates. The STC provides B-767 operators with a low cost, rapidly implemented retrofit of their cockpit avionics with a modern pilot and copilot suite of high resolution multi-color LCD flat panel displays. We believe that operators will also benefit from improved dispatch reliability, logistics savings, and adaptability to future requirements. The receipt of the STC positions the Company to pursue the more than 1,700 B-757 and B-767 aircraft with similar needs for Flat Panel Display System upgrades. The STC also provides a foundation for incorporating the product into other airplanes as well.

In fiscal 2006 the Flat Panel Display System product line continued to expand in terms of both FAA certifications and additional customer orders. The FAA awarded the Company two new Technical Standard Orders (TSO’s) and two new Supplemental Type Certificates (STC’s) for 15” and 10” Flat Panel Display System installations on Pilatus PC-12 airplanes. The Company also received orders from two Pilatus distributors for 15” installations. Further, Kalitta Air placed an order with the Company for Flat Panel Engine Instrument Display Systems (FP/EIDS) for B-747 retrofit applications. FAA certification relating to this display application is in process. Also, Marshalls of Cambridge, who last year chose us as their common core avionics upgrade, placed their first order with us this year. Their initial award was for C-130 retrofits. Jet Partners order for B-737 Flat Panel Display Systems was particularly significant because of the potential associated with the 3,500 Classic B-737 airplanes in operation.

Air Data Systems and Components

Our air data products calculate and display various measures such as aircraft speed, altitude and rate of ascent and descent. The functionality of our air data systems use advanced sensors to gather air pressure data and use customized algorithms to interpret data, thus allowing the system to more accurately calculate altitude.

We sell individual components as well as partial and complete air data systems. Our components and systems include:

·                    digital air data computers, which calculate various air data parameters such as altitude, airspeed, vertical speed, angle of attack and other information derived from the measure of air pressure;

·                    integrated air data computers and display units, which calculate and convey air data information;

·                    altitude displays, which convey aircraft altitude measurements;

·                    airspeed displays, which convey various types of airspeed measurements including vertical airspeed and rates of ascent and descent; and

·                    altitude alerters, which allow the pilot to select a desired cruising altitude that the aircraft will reach and maintain, and also provide warnings to pilots when an unacceptable deviation occurs.

7




Engine and Fuel Displays

We develop, manufacture and market engine and fuel displays. Our solid-state multifunction displays convey information with respect to fuel and oil levels and engine activity, such as oil and hydraulic pressure and temperature. This instrumentation includes individual and multiple displays clustered throughout an aircraft’s cockpit. Our displays can be used in conjunction with our own engine and fuel data equipment or that of other manufacturers.

Engine and fuel displays are found in all aircraft and are vital to the safe and proper flight of the aircraft. In addition, the accurate conveyance of engine and fuel information is critical for the monitoring of engine stress and the maintenance of engine parts. Engine and fuel displays tend to be replaced more frequently than other displays and have remained largely unchanged since their introduction due to their low cost, standard design and universal use.

We believe that our engine and fuel displays are extremely reliable, and we have designed them to be programmable to adapt easily without major modification to most modern aircraft. Our products have been installed on C-130H, DC-9, DC-10, P3 and A-10 aircraft.

Customers

Our customers include, among others, the United States Government (including DOD), Garrett, Bombardier Aerospace (the manufacturer of Learjet), Raytheon, Northwest Airlines, ABX Air, L-3, Spar Aerospace, Federal Express Corporation, The Boeing Company, Lockheed Martin Corporation, Rockwell Collins, Gulfstream Aerospace Corporation, Plain Avionics and Star Aviation.

The Company recorded sales with the DOD that amounted to 17% of total sales for the fiscal year 2006.

Retrofit Market

Historically, the majority of our sales have come from the retrofit market. Among other reasons, we have pursued the retrofit market because of its continued rapid growth in response to the increasing need to support the world’s aging fleet of aircraft.

Updating an individual aircraft’s existing electronics equipment has become increasingly common as new technology makes existing instrumentation outdated while an aircraft is still structurally and mechanically sound. Retrofitting an aircraft is generally a substantially less expensive alternative to purchasing a new aircraft. We expect our main customers in the retrofit market to be:

·                    the DoD and defense contractors;

·                    aircraft operators; and

·                    aircraft modification centers.

Department of Defense and Defense Contractors.   We sell our products directly to the DoD as well as to domestic and international defense contractors for end use on military aircraft retrofit programs. DoD programs generally take one of two forms, a subcontract with a prime government contractor, such as Boeing or Rockwell Collins, or a direct contract with the appropriate government agency such as the United States Air Force to satisfy its requirement for replacing Central Air Data Computers on the fleet of A-10 aircraft. The government’s desire for cost-effective retrofitting of aircraft has led it to purchase commercial off-the-shelf equipment rather than requiring the development of specially designed products, which are usually more costly and take a longer time to develop. These contracts tend to be on arms length commercial terms, although some of the termination and other provisions of government contracts described below are typically applicable to these contracts. Each government agency or general contractor

8




retains the right to terminate the contract at any time at its convenience. Upon such alteration or termination, we would be entitled to an equitable adjustment to the contract price so that we may receive the purchase price for already delivered items and reimbursement for allowable costs incurred.

Aircraft Operators.   We also sell our products to aircraft operators, including commercial airlines, cargo carriers and business and general aviation. Our products are used mostly in the retrofitting of aircraft owned or operated by these customers, which generally retrofit and maintain their aircraft themselves. Our commercial fleet customers include Northwest Airlines, Air Canada, Midcoast, MK Airlines, ABX Air, Federal Express, Kitty Hawk, ARC, Champion and Kelowna Flightcraft LTD. We sell these customers a range of products from fuel quantity indicators to air data systems.

Aircraft Modification Centers.   Based on industry data, we believe that there are approximately 12,800 private and corporate aircraft in service in North America. The primary retrofit market for private and corporate jets is through aircraft modification centers, which repair and retrofit private aircraft in a manner similar to the way auto mechanics service a person’s car. We have established relationships with a number of aircraft modification centers throughout the United States. These modification centers essentially act as distribution outlets for our products. We believe that our air data systems and related components are being promoted by aircraft modification centers to update older or outdated equipment. Our large modification center customers include Bombardier Learjet, Garrett Aviation, Star Aviation, Duncan Aviation, Plain Avionics and Raytheon Aircraft Services.

OEM Market

We also market our products to original equipment manufacturers, particularly manufacturers of corporate and private jets as well as to DoD contractors manufacturing military jets. Customers of our products include Bombardier (the manufacturer of Learjet), Gulfstream, Boeing, Raytheon, Piaggio and Lockheed.

Most aircraft manufacturers equip their current production aircraft with RVSM-compliant air data systems. In addition, we expect that as flat panel displays become increasingly popular, OEMs will begin manufacturing an increasing percentage of their aircraft with flat panel displays, either as standard or optional equipment. Most new high-end business aviation aircraft have flat panel displays as standard equipment.

Backlog

As of September 30, 2006 and 2005, our backlog was $28.0 million and $12.9 million, respectively. The year over year increase of $15.1 million or 117% was the result of growth in Flat Panel Display System and Air Data product lines. Flat Panel Display Systems backlog increased by 216% to $18.3 million The air data backlog increased 37% to $9.7 million.

Sales and Marketing

We have generally focused our sales efforts on the DoD, prime DoD contractors, aircraft operators and OEMs, and more recently on aircraft modification centers. We continually evaluate our sales and marketing efforts with respect to the military, commercial and corporate aviation markets and have made substantial use of third-party sales representatives who receive compensation through commissions based on performance.

We believe our ability to provide prompt and effective repair and upgrade service is critical to our marketing efforts. As part of our customer service program, we offer a 24-hour hotline that customers can call for product repair or upgrade concerns. We employ field service engineers to service our equipment and, depending on the service required, we may either dispatch a service crew to make necessary repairs or

9




request that the customer return the product to us for repairs or upgrades at our facility. In the event repairs or upgrades are required to be made at our facility, we provide spare products for use by our customers during the repair time. Our in-house turnaround repair times average 15 days and turnaround upgrade times average 30 days. Before returning our products to customers, all repaired or upgraded products are retested for airworthiness.

In connection with our customer service program, we typically provide customers with a two-year warranty on new products. We also offer customers extended warranties of varying terms for additional fees.

Government Regulation

The manufacture and installation of our products in aircraft owned and operated in the United States is governed by FAA regulations. We maintain an FAA certified production facility. The most significant of the product and installation regulations focus on Technical Standard Order (TSO) and Supplemental Type Certificate (STC) certifications. These certifications set forth the minimum general standards that a certain type of equipment should meet. As required, we deliver our product in accordance with FAA regulations.

Sales of our products to European or other non-U.S. owners of aircraft also typically require approval of the European Aviation Safety Agency (EASA), the European counterpart of the FAA, or another appropriate governmental agency. EASA certification requirements for the manufacturing and installation of our products in European-owned aircraft mirror the FAA regulations. Much like the FAA certification process, the EASA has established a process for granting European Certifications.

In addition to product-related regulations, we are also subject to U.S.Government procurement regulations with respect to sale of our products to government entities or government contractors. These regulations dictate the manner in which products may be sold to the government and set forth other requirements that must be met in order to do business with or on behalf of government entities. For example, the government agency or general contractor may alter the price, quantity or delivery schedule of our products. In addition, the government agency or general contractor retains the right to terminate the contract at any time at its convenience. Upon such alteration or termination, we would be entitled to an equitable adjustment to the contract price so that we may receive the purchase price for already delivered items and reimbursement for allowable costs incurred.

Manufacturing, Assembly and Materials Acquisition

Our manufacturing activities consist primarily of assembling and testing components and subassemblies and integrating them into a finished system. We believe that this method allows us to achieve relatively flexible manufacturing capacity while minimizing expenses. We generally purchase the components for our products from third-party vendors and assemble them in a clean room environment to reduce impurities and improve the performance of our products. Many of the components we purchase are standard products, although certain parts are made to our specifications.

When appropriate, we enter into long-term supply agreements and use our relationships with long-term suppliers to improve product quality and availability and to reduce delivery times and product costs. In addition, we are continually identifying alternative suppliers for important component parts. Using component parts from new suppliers in our products generally requires FAA certification of the entire finished product if the newly sourced component varies significantly from our original drawings and specifications. To date, we have not experienced any significant delays in the delivery of our products caused by the inability to obtain either component parts or FAA approval of products incorporating new component parts.

10




Quality Assurance

Product quality is of vital importance to our customers, and we have taken steps to enhance the overall quality of our products. We are ISO 9001 and AS 9100 certified. ISO 9001 and AS 9100 standards are an international consensus on effective management practices with the goal of ensuring that a company can consistently deliver its products and related services in a manner that meets or exceeds customer quality requirements. These standards allow us to represent to our customers that we maintain high quality industry standards in the education of our employees and the design and manufacture of our products. In addition, our products undergo extensive quality control testing prior to being delivered to customers. As part of our quality assurance procedures, we maintain detailed records of test results and our quality control processes.

Our Competition

The market for our products is highly competitive and characterized by several industry niches in which a number of manufacturers specialize. Our competitors vary in size and resources, and substantially all of our competitors are much larger and have substantially greater resources than us. With respect to air data systems and related products, our principal competitors include Kollsman Inc., Honeywell International Inc., Rockwell Collins, Inc., Thales and Smiths PLC. With respect to flat panel displays, our principal competitors currently include Honeywell, Rockwell Collins, Inc., L-3 Communications and Smiths. However, because the flat panel display industry is a new and evolving market, as the demand for flat panel displays increases we may face competition in this area from additional companies in the future.

We believe that the principal competitive factors in the markets we serve are cost, development cycle time, responsiveness to customer preferences, product quality, technology and reliability. We believe that our significant and long-standing customer relationships reflect our ability to compete favorably with respect to these factors.

Intellectual Property and Proprietary Rights

We rely on patents to protect our proprietary technology. We currently hold 17 U.S. patents and have 5 U.S. patent applications pending relating to our technology. In addition, we hold 11 international patents and have 13 international patent applications pending. Certain of these patents and patent applications cover technology relating to air data measurement systems and calibration techniques while others cover technology relating to flat panel display systems and other aspects of our COCKPIT/IP™ solution. While we believe that these patents have significant value in protecting our technology, we also believe that the innovative skill, technical expertise and the know-how of our personnel in applying the technology reflected in our patents would be difficult, costly and time consuming to reproduce.

While there are no pending lawsuits against us regarding patent infringement or other intellectual property rights, we cannot be certain such infringement claims will not be asserted against us in the future.

Innovative Solutions and Support Website

Our primary website is http://www.innovative-ss.com. We make available, free of charge, at our corporate website our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities and Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC.

11




Our Employees

As of September 30, 2006, we had 138 employees, 51 were in our manufacturing and assembly operations, 50 in research and development, 8 in quality and 29 in selling & general administrative positions.

Our future success depends on our ability to attract, train and retain highly qualified personnel. We plan to hire additional personnel, including, in particular, sales and marketing personnel, during the next twelve months. Competition for such qualified personnel is intense and we may not be able to attract, train and retain highly qualified personnel in the future. Our employees are not represented by a labor union.

Other

On June 13, 2005, the Company’s Board of Directors approved a three-for-two split of the Company’s common stock. The stock split was in the form of a fifty percent (50%) stock dividend that was paid on July 7, 2005 to shareholders of record on June 23, 2005. The issued and outstanding common stock and all share and per share amounts (except par value) have been retroactively restated in this report to give effect to this three-for-two stock split.

Executive Officers of the Registrant

The following is a list of our executive officers, their ages and their positions:

Name

 

 

 

Age

 

Position

 

Geoffrey S. M. Hedrick

 

 

64

 

 

Chairman of the Board and Chief Executive Officer

 

Roman G. Ptakowski

 

 

58

 

 

President

 

James J. Reilly

 

 

66

 

 

Chief Financial Officer

 

 

Geoffrey S. M. Hedrick has been Chief Executive Officer since he founded IS&S in February 1988 and Chairman of the Board since 1997. Prior to founding IS&S, Mr. Hedrick served as President and Chief Executive Officer of Smiths Industries North American Aerospace Companies. He also founded Harowe Systems, Inc. in 1971, which was subsequently acquired by Smiths Industries. Mr. Hedrick has over 35 years of experience in the avionics industry, and he holds a number of patents in the electronics, optoelectric, electromagnetic, aerospace and contamination-control fields.

Roman G. Ptakowski has been President since March 2003. Prior to that, Mr. Ptakowski served as a Group Vice President and General Manager and, before that, as a Vice President of Sales and Marketing at B/E Aerospace, Inc. Previously, Mr. Ptakowski held a number of positions with increasing responsibility within ASEA Brown Boveri Power T&D Company, Inc. There, he was General Manager of the Protective Relay Division before leaving to join B/E Aerospace, Inc. Mr. Ptakowski received a B.S. in Electrical Engineering from New York University and a MBA from Duke University.

James J. Reilly has been Chief Financial Officer since February 2000. From 1996 to 1999, Mr. Reilly was employed by B/E Aerospace, Inc., Seating Products Group, as Vice President and Chief Financial Officer. From 1989 to 1996, Mr. Reilly was employed by E-Systems, Inc. as Vice President and Principal Accounting Officer. Mr. Reilly received a Bachelor of Science degree and a MBA from The University of Hartford.

Item 1A.                Risk Factors.

You should carefully consider the risks, uncertainties and other factors described below, in addition to the other information set forth in this report, because they could materially and adversely affect our business, operating results, financial condition, cash flows and prospects as well as adversely affect the value of an investment in our common stock.

12




Risks Related to Our Business

Our sales principally relate to air data and flat panel systems products, and we cannot be certain that the market will continue to accept these or other products.

During fiscal 2006 and 2005, we derived 62% and 94%, respectively, of our revenues from the sale of air data systems and related products. We expect that revenues from our air data products will continue to decline as the peak demand associated with the FAA’s RVSM mandate has been accommodated. Accordingly, our revenues will decrease if new products such as our Flat Panel Display Systems do not receive market acceptance or if our existing customers do not continue to incorporate our products in their retrofitting or manufacturing of aircraft. In seeking new customers, it may be difficult for our products to displace competing products. Accordingly, we cannot assure you that potential customers will accept our products or that existing customers will not abandon them.

A portion of our sales have been, and we expect will continue to be, to defense contractors or government agencies in connection with government aircraft retrofit or original manufacturing contracts. Sales to government contractors and government agencies accounted for approximately 29% and 20% respectively, of our revenues during fiscal 2006 and 2005. Our revenues in this area could decline as a result of DoD spending cuts and general budgetary constraints.

In addition, our revenues are concentrated with a limited number of customers. We derived 47% of our revenues during fiscal year 2006 from 5 customers, DoD, Department of National Defense Canada, ABX Air, Boeing and Star Aviation. We derived 47% of our revenues during fiscal year 2005 from 5 customers, Bombardier, Star Aviation, Garrett, FedEx and the DoD. We expect a relatively small number of customers to account for a majority of our revenues for the foreseeable future. As a result of our concentrated customer base, a loss of one or more of these customers could have a material adverse effect on our revenues and results of operations.

The growth of our customer base could be limited by delays or difficulties in completing the development and introduction of our planned products or product enhancements. If we fail to enhance existing products or to develop and achieve market acceptance for flat panel displays and other new products that meet customer requirements, our business may not grow.

Although a substantial majority of our revenues in the past have come from sales of air data systems and related products, we currently spend a large portion of our research and development efforts in developing and marketing our flat panel display systems (CIP) and complementary products. Our ability to grow and diversify our operations through the introduction and sale of new products, such as flat panel display systems, is dependent upon our success in continuing product development and engineering activities as well as our sales and marketing efforts and our ability to obtain requisite approvals to sell such products. Our sales growth will also depend in part on the market acceptance of and demand for our CIP and future products. We cannot be certain that we will be able to develop, introduce or market our CIP or other new products or product enhancements in a timely or cost-effective manner or that any new products will receive market acceptance or necessary regulatory approval.

We rely on third party suppliers for components of our air data systems products, and any interruption in the supply of these components could hinder our ability to deliver our products.

Our manufacturing process consists primarily of assembling components purchased from our supply chain. These suppliers may not continue to be available to us. If we are unable to maintain relationships with key third party suppliers, the development and distribution of our products could be delayed until equivalent components can be obtained and integrated into our products. In addition, substitution of certain components from other manufacturers may require FAA or other approval, which could delay our ability to ship products.

13




Our government retrofit projects are generally pursuant to either a direct contract with a government agency or a subcontract with the general contractor to a government agency. Each contract includes various federal regulations that impose certain requirements on us, including the ability of the government agency or general contractor to alter the price, quantity or delivery schedule of our products. In addition, the government agency or general contractor retains the right to terminate the contract at any time at its convenience. Upon alteration or termination of these contracts, we would be entitled to an equitable adjustment to the contract price so that we may receive the purchase price for items we have delivered and reimbursement for allowable costs we have incurred. Accordingly, because these contracts can be terminated, we cannot assure you that our government retrofit backlog will result in sales.

We depend on key personnel to manage our business effectively, and if we are unable to retain our key employees, our ability to compete could be harmed.

Our success depends on the efforts, abilities and expertise of our senior management and other key personnel. With the exception of our President, we generally do not have employment agreements with our employees. There can be no assurance that we will be able to retain such employees, the loss of some of whom could hurt our ability to execute our business strategy. We intend to continue hiring key management and sales and marketing personnel. Competition for such personnel is intense, and we may not be able to attract or retain additional qualified personnel. We do not maintain key man life insurance for our executive officers.

Our future success will depend in part on our ability to implement and improve our operational, administrative and financial systems and controls and to manage, train and expand our employee base. We cannot assure you that our current and planned personnel levels, systems, procedures and controls will be adequate to support our future operations. If inadequate, we may not be able to exploit existing and potential market opportunities. Any delays or difficulties we encounter could impair our ability to attract new customers or enhance our relationships with existing customers. Our revenue and operating results may vary significantly from quarter to quarter, which may cause our stock price to decline.

Our revenues and operating results may vary significantly from quarter to quarter due to a number of factors, including:

·       demand for our products;

·       capital expenditure budgets of aircraft owners and operators and appropriation cycles of the U.S. government;

·       changes in the use of our products, including air data systems and flat panel displays;

·       delays in introducing or obtaining government approval for new products;

·       new product introductions by competitors;

·       changes in our pricing policies or the pricing policies of our competitors; and

·       costs related to possible acquisitions of technologies or businesses.

We plan to increase our operating expenses to expand our sales and marketing operations and fund greater levels of product development. As a result, a delay in generating revenues could cause significant variations in our operating results from quarter to quarter.

Our competition includes other manufacturers of air data systems and flight information displays against whom we may not be able to compete successfully.

The markets for our products are intensely competitive and subject to rapid technological change. Our competitors include Kollsman, Inc., Honeywell International Inc., Rockwell Collins Inc., Smiths Industries plc and L-3 Communications. Substantially all of our competitors have significantly greater financial,

14




technical and human resources than we do. In addition, our competitors have much greater experience in and resources for marketing their products. As a result, our competitors may be able to respond more quickly to new or emerging technologies and customer preferences or devote greater resources to the development, promotion and sale of their products than we can. Our competitors may also have greater name recognition and more extensive customer bases that they can use to their benefit. This competition could result in price reductions, fewer customer orders, reduced gross margins and loss of market share.

We may not be able to identify or complete acquisitions or we may consummate an acquisition that adversely affects our operating results.

One of our strategies is to acquire businesses or technologies that will complement our existing operations. We have limited experience in acquiring businesses or technologies. There can be no assurance that we will be able to acquire or profitably manage acquisitions or successfully integrate them into our operations. Furthermore, certain risks are inherent in pursuing acquisitions, such as the diversion of management’s time and attention and combining disparate company cultures and facilities. Acquisitions may have an adverse effect on our operating results, particularly in quarters immediately following the consummation of such transactions, as we integrate the operations of the acquired businesses into our operations. Once integrated, acquisitions may not perform as expected.

Our success depends on our ability to protect our proprietary rights, and there is a risk of infringement. If we are unable to protect and enforce our intellectual property rights, we may be unable to compete effectively.

Our success and ability to compete will depend in part on our ability to obtain and maintain patent or other protection for our technology and products, both in the United States and abroad. In addition, we must operate without infringing the proprietary rights of others.

We currently hold 17 U.S. patents and have 5 U.S. patent applications pending. In addition, we hold 11 international patents and have 13 international patent applications pending. We cannot be certain that patents will be issued on any of our present or future applications. In addition, our existing patents or any future patents may not adequately protect our technology if they are not broad enough, are successfully challenged or other entities are able to develop competing methods without violating our patents. If we are not successful in protecting our intellectual property, competitors could begin to offer products that incorporate our technology. Patent protection involves complex legal and factual questions and, therefore, is highly uncertain, and litigation relating to intellectual property is often very time consuming and expensive. If a successful claim of patent infringement were made against us or we are unable to develop non-infringing technology or license the infringed or similar technology on a timely and cost-effective basis, we might not be able to make some of our products.

Risks Related to Our Industry

If we are unable to respond to rapid technological change, our products could become obsolete and our reputation could suffer.

Future generations of air data systems, engine and fuel displays and flat panel displays embodying new technologies or new industry standards could render our products obsolete. The market for aviation products is subject to rapid technological change, new product introductions, changes in customer preferences and evolving industry standards. Our future success will depend on our ability to:

·       adapt to rapidly changing technologies;

·       adapt our products to evolving industry standards; and

·       develop and introduce a variety of new products and product enhancements to address the increasingly sophisticated needs of our customers.

15




Our future success will also depend on our developing high quality, cost-effective products and enhancements to our products that satisfy the needs of our customers and on our introducing these new technologies to the marketplace in a timely manner. If we fail to modify or improve our products in response to evolving industry standards, our products could rapidly become obsolete.

Our products are currently subject to direct regulation by the FAA, its European counterpart, the European Aviation Safety Administration (EASA), and other comparable organizations. Our products, as they relate to aircraft applications, must be approved by the FAA, EASA or other comparable organizations before they can be used in an aircraft. To be certified, we must demonstrate that our products are accurate and able to maintain certain levels of repeatability over time. Although the certification requirements of the FAA and the EASA are substantially similar, there is no formal reciprocity between the two systems. Accordingly, even though some of our products are FAA-approved, we may need to obtain approval from the EASA or other appropriate organizations to have them certified for installation outside the United States.

Significant delay in receiving certification for newly developed products or enhancements to our products or losing certification for our existing products could result in lost sales or delays in sales. Furthermore, the adoption of additional regulations or product standards, as well as changes to the existing product standards, could require us to change our products and underlying technology. We cannot assure you that we will receive regulatory approval on a timely basis or at all.

Because our products utilize sophisticated technology and are deployed in complex aircraft cockpit environments, problems with these products may arise that could seriously harm our reputation for quality assurance and our business.

Our products use complex system designs and components that may contain errors, omissions or defects, particularly when we incorporate new technologies into our products or we release new versions or enhancements of our products. Despite our quality assurance process, errors, omissions or defects could occur in our current products, in new products or in new versions or enhancements of existing products after commercial shipment has begun. We may be required to redesign or recall those products or pay damages. Such an event could result in the following:

·       delay or loss of revenues;

·       cancellation of customer contracts;

·       diversion of development resources;

·       damage to our reputation;

·       increased service and warranty costs; or

·       litigation costs.

Although we currently carry product liability insurance, this insurance may not be adequate to cover our losses in the event of a product liability claim. Moreover, we may not be able to maintain such insurance in the future.

We have limited experience in marketing and distributing our products internationally.

We expect to derive an increasing amount of our revenues from sales outside the United States, particularly in Europe. There are certain risks inherent in doing business on an international basis, such as:

·       differing regulatory requirements for products being installed in aircraft;

·       legal uncertainty regarding liability;

·       tariffs, trade barriers and other regulatory barriers;

16




·       political and economic instability;

·       changes in diplomatic and trade relationships;

·       potentially adverse tax consequences;

·       the impact of recessions in economies outside the United States; and

·       variance and unexpected changes in local laws and regulations.

Currently, all of our international sales are denominated in U.S. dollars. An increase in the value of the dollar compared to other currencies could make our products less competitive in foreign markets. In the future, we may be required to conduct sales in local currencies, exposing us to changes in exchange rates that could adversely affect our operating results.

Item 1B.               Unresolved Staff Comments.

None

Item 2.                        Properties.

In fiscal 2001 we purchased 7.5 acres of land in the Eagleview Corporate Park in Exton, Pennsylvania, a suburb of  Philadelphia. There we constructed a 44,800 square foot design, manufacturing and office facility. Land development approval allows for expansion of up to 20,400 additional square feet. This would provide for a 65,200 square foot facility. The construction was principally funded with a Chester County, Pennsylvania,  Industrial Revenue Bond. The building serves as security for the Industrial Revenue Bond.

Item 3.                        Legal Proceedings.

In the ordinary course of our business, we are at times subject to various legal proceedings. We do not believe that any current legal proceedings will have a material adverse effect on our results of operations or financial position.

Item 4.                        Submission of Matters to a Vote of Security Holders.

No matters were submitted to a vote of our shareholders during the three months ended September 30, 2006.

17




Part II

Item 5.                        Market for the Registrant’s Common Equity and Related Stockholder Matters.

Our common stock has been traded on the Nasdaq National Market under the symbol “ISSC” since our initial public offering on August 4, 2000. The following table lists the high and low per share sale prices for our common stock for the periods indicated:

 

 

Fiscal 2006

 

Fiscal 2005

 

Period

 

 

 

High

 

Low

 

High

 

Low

 

First Quarter

 

$

15.90

 

$

11.70

 

$

23.65

 

$

13.37

 

Second Quarter

 

$

15.66

 

$

12.50

 

$

22.79

 

$

17.71

 

Third Quarter

 

$

17.17

 

$

11.12

 

$

26.13

 

$

19.07

 

Fourth Quarter

 

$

16.25

 

$

13.61

 

$

23.50

 

$

14.75

 

 

On December 1, 2006, there were 26 holders of record of the shares of outstanding common stock.

We have not paid cash dividends on our common stock, and we do not expect to declare or pay cash dividends on our common stock in the near future. We intend to retain any earnings to finance the growth of our business.

On December 28, 2005 the Company’s Board of Directors approved a common stock repurchase program to acquire up to 2,000,000 shares of our outstanding common stock. Purchases of the stock were to be made from time to time, subject to market conditions and at prevailing market prices. The program expired on June 30, 2006. During fiscal year 2006 we purchased 1,272,510 shares of common stock under the program at a cost of $18.1 million, or an average market price of $14.21 per share. We financed these purchases through our available cash.

Equity Compensation Plan Information

The following table gives information about our common stock that may be issued upon the exercise of options and rights under all of our existing equity compensation plans and arrangements as of September 30, 2006, including the 1998 Stock Option Plan.

Plan Category

 

 

 

Number of Securities to
be issued upon exercise
of outstanding options
and rights

 

Weighted-average
exercise price of
outstanding options
and rights

 

Number of Securities
remaining available for future
issuance under equity
compensation plans
(excluding securities reflected
in second column)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equity compensation plans approved by security holders

 

 

705,129

 

 

 

$

9.95

 

 

 

1,698,065

 

 

Equity compensation plans not approved by security holders

 

 

0

 

 

 

$

0.00

 

 

 

0

 

 

 

 

 

705,129

 

 

 

$

9.95

 

 

 

1,698,065

 

 

 

The 2003 Restricted Stock Plan for non-employee directors was approved by shareholders at the Company’s February 26, 2004 Annual Meeting of Shareholders. The Plan called for an annual award of restricted stock having a fair market value of $25,000 as of the close of business on October 1 of the current fiscal year for all eligible non-employee directors. The stock is awarded in four installments quarterly during the fiscal year provided the director is still serving on the board on the quarterly issue date. In fiscal year 2005 the annual award was increased to $40,000 effective the fourth quarter of the fiscal year.

18




In the fiscal years ended September 30, 2006, 2005 and 2004, awards to our non-employee directors under the Plan were 15,396, 15,828 and 30,855 shares respectively.

Item 6.                        Selected Consolidated Financial Data.

The following tables present portions of our consolidated financial statements. You should read the following selected consolidated financial data set forth below together with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes to our financial statements appearing elsewhere herein. The selected statement of operations data for the years ended September 30, 2006, 2005 and 2004 and the balance sheet data as of September 30, 2006 and 2005 are derived from our audited consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The selected statements of operations data for the years ended September 30, 2003 and 2002 and the balance sheet data as of September 30, 2004, 2003 and 2002 are derived from our audited consolidated financial statements that are not included in this Annual Report on Form 10-K.

 

Fiscal year ended September 30,

 

 

 

2006

 

2005

 

2004

 

2003

 

2002

 

Statement of Operations Data:

 

 

 

 

 

 

 

 

 

 

 

Net sales

 

$

16,721,967

 

$

63,264,359

 

$

46,099,777

 

$

28,168,752

 

$

28,345,620

 

Cost of sales

 

8,631,761

 

20,888,729

 

15,663,108

 

11,346,057

 

11,290,085

 

Gross profit

 

8,090,206

 

42,375,630

 

30,436,669

 

16,822,695

 

17,055,535

 

Research and development

 

6,749,426

 

6,057,889

 

4,811,156

 

3,376,849

 

4,755,422

 

Selling, general and administrative

 

9,863,758

 

8,898,622

 

7,567,959

 

5,890,362

 

5,732,886

 

Total operating expenses

 

16,613,184

 

14,956,511

 

12,379,115

 

9,267,211

 

10,488,308

 

Operating income (loss)

 

(8,522,978

)

27,419,119

 

18,057,554

 

7,555,484

 

6,567,227

 

Interest (income) expense, net

 

(3,091,986

)

(1,764,246

)

(404,727

)

(450,421

)

(722,850

)

Income (loss) before income taxes

 

(5,430,992

)

29,183,365

 

18,462,281

 

8,005,905

 

7,290,077

 

Income tax (expense) benefit, net

 

2,548,600

 

(10,598,563

)

(6,530,084

)

(2,464,715

)

(1,879,799

)

Net income (loss)

 

$

(2,882,392

)

$

18,584,802

 

$

11,932,197

 

$

5,541,190

 

$

5,410,278

 

Net income (loss) per common share:

 

 

 

 

 

 

 

 

 

 

 

Basic

 

$

(0.17

)

$

1.04

 

$

0.69

 

$

0.30

 

$

0.28

 

Diluted

 

$

(0.17

)

$

1.02

 

$

0.67

 

$

0.30

 

$

0.28

 

Weighted average shares outstanding

 

 

 

 

 

 

 

 

 

 

 

Basic

 

17,388,524

 

17,873,780

 

17,400,380

 

18,391,626

 

19,246,341

 

Diluted

 

17,388,524

 

18,259,856

 

17,928,180

 

18,743,661

 

19,604,081

 

 

 

September 30,

 

 

 

 

 

2006

 

2005

 

2004

 

2003

 

2002

 

Balance Sheet Data:

 

 

 

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

$

62,984,829

 

$

83,172,582

 

$

65,867,167

 

$

48,789,744

 

$

52,245,754

 

Working capital

 

73,751,866

 

93,455,475

 

70,627,114

 

55,996,411

 

59,158,307

 

Total Assets

 

87,232,880

 

107,034,878

 

87,468,627

 

69,876,625

 

72,616,685

 

Debt and capital lease obligations, less current portion

 

4,239,587

 

4,248,113

 

4,255,681

 

4,235,000

 

4,235,000

 

Total shareholders’ equity

 

78,201,353

 

97,866,098

 

75,454,987

 

61,058,290

 

64,726,210

 

 

19




Item 7.                        Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis should be read in conjunction with “Selected Consolidated Financial Data” and our financial statements and the related notes included in this report.

Overview

Innovative Solutions and Support was founded in 1988. The Company designs, develops, manufactures and sells flight information computers, large flat-panel displays and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation , airspeed, altitude as well as engine and fuel data measurements.

Our sales are derived from the sale of our products to the retrofit market and, to a lesser extent, original equipment manufacturers (OEMs). Our customers include the DoD and their commercial contractors, aircraft operators, aircraft modification centers and various OEMs. Although we occasionally sell our products directly to the DoD, we primarily have sold our products to commercial customers for end use in DoD programs. Sales to defense contractors are on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts.

Our cost-of-sales is comprised of material components purchased through our supplier base and direct in-house assembly labor and overhead costs. Many of the components we use in assembling our products are standard, although certain parts are manufactured to meet our specifications. The overhead portion of cost of sales is primarily comprised of salaries and benefits, building occupancy, supplies, and outside service costs related to our production, purchasing, material control and quality departments, and warranty costs.

We intend to continue investing in the development of new products that complement our current product offerings and will expense associated research and development costs as they are incurred.

Our selling, general and administrative expenses consist of sales, marketing, business development, professional services and salaries and benefits for executive and administrative personnel as well as facility costs, recruiting, legal, accounting and other general corporate expenses.

Results of Operations

Fiscal Year Ended September 30, 2006 Compared to Fiscal Year Ended September 30, 2005

Net sales.   Net sales decreased $46.5 million or 73% to $16.7 million for fiscal 2006 from $63.3 million for fiscal 2005. The decrease in net sales was primarily the result of a fall off in Air Data deliveries coupled with a slow start up of Flat Panel Display System deliveries. Significant Air Data product deliveries were realized in fiscal 2005 in order for aircraft to meet the Federal Aviation Administration’s (FAA) Reduced Vertical Separation Minimum (RVSM) mandate that became effective on January 20, 2005. As a result Air Data sales peaked in fiscal 2005 and were sharply reduced in fiscal 2006. Flat Panel Display System sales amounted to $6.4 million in fiscal 2006 and exceeded the prior year by 56%. The increase, however, was not sufficient enough to offset reduced Air Data sales.

Cost of sales.   Cost of sales decreased $12.3 million or 59% to $8.6 million, or 51% of net sales, for fiscal 2006 from $20.9 million, or 33% of net sales, for fiscal 2005. The decrease in the dollar amount was essentially due to lower sales in the period. The increase as a percent of net sales was primarily the result of fixed operating costs being absorbed over lower net sales in the fiscal year.

Research and development.   Research and development expenses increased $0.7million, or 11% to $6.7 million, or 40% of net sales for fiscal 2006 from $6.1 million or 10% of net sales for fiscal 2005. The dollar increase was principally due to increased salaries and associated benefits, consultants and supplies. Expense on a percent to sales basis increased due to lower sales in the fiscal year.

20




Selling, general and administrative expenses.   Selling, general and administrative expenses increased $1.0 million or 11% to $9.9 million, or 59% of net sales, for fiscal 2006 from $8.9 million, or 14% of net sales, for fiscal 2005. The increase in the dollar amount was principally the result of legal and other fees relating to intellectual property matters and to recording, for the first time in accordance with FAS 123R, stock based compensation expense. Increases in these two areas were partially offset by lower commissions and lower salary related expenses. The increase as a percent of net sales was the result of both increased expenses and lower sales in the fiscal year.

Interest (income) expense, net.   Net interest income increased $1.3 million or 75% to $3.1 million for fiscal 2006 from $1.8 million for fiscal 2005. Net interest income for fiscal 2006 was higher mainly because of higher interest rates in the period.

Income tax.   The income tax benefit for fiscal 2006 was $2.5 million. The income tax expense for fiscal 2005 was $10.6 million. The decrease in the amount of tax from a tax expense to a tax benefit was primarily due to recording a loss before tax fiscal year 2006.

The effective tax rate for fiscal 2006 was a benefit of 46.9%. For fiscal 2005 the effective tax rate was 36.3%. For fiscal 2006 the effective tax rate differs from the statutory rate due to the benefit for state income taxes and an adjustment to the tax payable accounts, partially offset by the loss of benefit from the deduction for domestic production activities and the exclusion for extraterritorial income due to the taxable loss for the year. For fiscal 2005 the effective tax rate differs from the statutory rate due to state tax expense, partially offset by the utilization of research and development tax credits.

Net income (loss).   As a result of the factors described above, our net loss for fiscal 2006 was $2.9 million a $21.5 million decrease from net income of $18.6 million for fiscal 2005. On a fully diluted basis, the loss per share of $0.17 for fiscal 2006 compares to an earnings per share of $1.02 for fiscal 2005.

Fiscal Year Ended September 30, 2005 Compared to Fiscal Year Ended September 30, 2004

Net sales.   Net sales increased $17.2 million or 37% to $63.3 million for fiscal 2005 from $46.1 million for fiscal 2004. The rise in net sales was primarily due to increased demand for our Air Data Products. Flat Panel Display System sales increased from $1.1 million in fiscal 2004 to $3.9 million in fiscal 2005, a 250% increase. Approximately one-half of the increased Air Data demand was attributable to military retrofit programs. The balance was principally in response to commercial aviation upgrading aircraft with air data systems that comply with the Federal Aviation Administration’s (FAA) Reduced Vertical Separation Minimum (RVSM) mandate. Several general aviation customers, including Garrett, Gulfstream, Bombardier, Star Aviation and AeroMech contributed to the year over year growth in net sales.

Cost of sales.   Cost of sales increased $5.2 million or 33% to $20.9 million, or 33% of net sales, for fiscal 2005 from $15.7 million, or 34% of net sales, for fiscal 2004. The increase in the gross dollar amount was due to higher net sales in the period. The decline as a percentage of net sales was primarily the result of our fixed operating cost being absorbed over higher net sales in the current period.

Research and development.   Research and development expenses increased $1.2 million, or 26% to $6.1 million, or 10% of net sales in fiscal 2005 from $4.8 million or 10% of net sales in fiscal 2004. The gross dollar increase was principally due to increased salaries and associated benefits. Expense on a percent to sales basis was essentially unchanged from year to year.

Selling, general and administrative expenses.   Selling, general and administrative expenses increased $1.3 million or 18% to $8.9 million, or 14% of net sales, for fiscal 2005 from $7.6 million, or 16% of net sales, for fiscal 2004. The increase in the dollar amount was the result of higher wages, the cost of corporate governance initiatives and commissions due to higher net sales. The decrease as a percent of net sales was the result of higher net sales in the current period.

21




Interest (income) expense, net.   Net interest income increased $1.4 million or 336% to $1.8 million for fiscal 2005 from $0.4 million in fiscal 2004. Net interest income for fiscal 2005 was higher because of higher interest rates in the period coupled with higher cash balances.

Income tax.   Income tax expense was $10.6 million in fiscal 2005 compared to $6.5 million in fiscal 2004. The $4.1 million income tax increase was the result of a higher pre tax profits for fiscal 2005. Tax rates in both years were essentially unchanged, ranging from 35.4% in fiscal 2004 to 36.3% in fiscal 2005.

Net income.   As a result of the factors described above, net income increased $6.7 million or 56% to $18.6 million, or 29% of net sales in fiscal 2005 from $11.9 million, or 26% of net sales in fiscal 2004. On a fully diluted basis, earnings per share (EPS) increased $0.35 or 52% to $1.02 during fiscal 2005 from $0.67 in fiscal 2004.

Related-Party Transactions:

The Company incurred legal fees of $357,000, $137,000, and $115,898 with a law firm that is a shareholder of the Company for the years ended September 30, 2006, 2005 and 2004, respectively. The fees paid and services rendered were comparable with the fees paid and services rendered prior to the law firm’s investment in the Company.

For the years ended September 30, 2006, 2005 and 2004, respectively, we incurred service fees of $25,000, $33,000 and $124,932 with a commercial graphics firm controlled by an individual who is married to a significant shareholder and the daughter of the Company’s Chairman and Chief Executive Officer.

Liquidity and Capital Resources

Our primary source of liquidity over the past three years has been cash flows from operations. We require cash principally to finance inventory, payroll and accounts receivable.

Our cash flow used in operating activities was a $1.6 million in fiscal 2006 as compared to a contribution of $16.0 million in fiscal 2005. The $17.6 million difference was attributable to a swing in net income of $21.5 million from net loss in the current fiscal year of $2.9 million to $18.6 million of net income in fiscal year 2005; also, inventory grew by $3.8 million. Partially offsetting the decline in operating cash flow were reduced prepaid expenses, $3.3 million, accounts receivable, $2.6 million, and accrued expenses, $0.9 million.

Our cash flow provided by operating activities was $16.0 million in fiscal 2005 as compared to $16.1 million in fiscal 2004. While the cash flows were essentially the same, there were several offsetting amounts, as follows: Net income was up $6.7 million, inventory improved $3.6 million and tax benefits contributed $1.3 million. Offsetting the increase in year over year cash flow were prepaid expenses ($3.4) million, accounts payable ($2.5) million and accounts receivable ($2.4) million.

Our cash used in investing activities was $0.7 million in fiscal 2006 and consisted of spending for product certification, production equipment and laboratory test equipment as compared to $0.5 million used in fiscal 2005 for production equipment, laboratory test equipment, computer equipment and office furniture. Our cash used in investing activities, mainly for manufacturing and engineering equipment, was $0.8 million in fiscal 2004.

Our cash outflow from financing activities was $17.9 million for fiscal 2006. The primary use of cash for financing activities was attributable to the Company purchasing 1,272,510 shares of our stock at a total cost of $18.1 million. In fiscal year 2005 our cash inflow from financing activities was $1.8 million and was the result of stock option exercises. In fiscal year 2004 our cash inflow was due to the exercise of stock options, $1.1 million, and the exercise of warrants, $0.7million.

22




To accommodate our future growth, we purchased 7 and 1¤2 acres of land in the Eagleview Corporate Park, Exton, Pennsylvania. There we constructed a 44,800 square foot facility that is expandable to 65,200 square feet. Both the land and building cost approximate $6.5 million. Of this amount, $4.3 million was funded through an Industrial Development Bond (IDB) and the remainder from cash from operations.

The IBD requires the Company to maintain certain financial covenants including a ratio of liabilities to earnings before interest, taxes and depreciation and amortization (EBDITDA), fixed charge ratio and a minimum tangible net worth. As of June 30, 2006, the Company was in violation of these financial covenants. The defaults were subsequently waived and an amendment to the agreement was entered into with the lender whereby the existing covenants were suspended until the fiscal quarter ending on June 30, 2007.

Our future capital requirements depend on numerous factors, including market acceptance of our products (in particular flat panel display systems), the timing and rate of expansion of our business, acquisitions, joint ventures and other factors. We have experienced increases in our expenditures since our inception consistent with growth in our operations, personnel, and product line and we anticipate that our operations and expenditures will continue to increase in the foreseeable future. We believe that our cash and cash equivalents, together with net proceeds from any new credit facility we may enter into, will provide sufficient capital to fund our operations for at least the next twelve months. However, we may need to raise additional funds through public or private financing or other arrangements in order to support more rapid expansion of our business than we currently anticipate. Further, we may develop and introduce new or enhanced products, respond to competitive pressures, invest in or acquire businesses or technologies or respond to unanticipated requirements or developments.

Our contractual obligations of September 30, 2006 mature as follows:

 

 

Payments Due by Period

 

Contractual Obligations

 

 

 

Total

 

Less than
1 Year

 

1-3 Years

 

4-5 Years

 

After 5
Years

 

Interest on loan from Chester County Industrial Dev. Auth.(1)

 

$

1,505,979

 

$

167,331

 

$

334,662

 

$

334,662

 

$

669,324

 

Principal on Chester County Industrial Loan

 

4,335,000

 

100,000

 

 

 

 

 

4,235,000

 

Operating Lease

 

55,020

 

22,008

 

33,012

 

 

 

 

 

Capital Leases

 

12,478

 

7,891

 

4,587

 

 

 

 

 

Puchase Obligations(2)

 

1,111,683

 

812,364

 

247,883

 

50,400

 

1,036

 

 

 

$

7,020,160

 

$

1,109,594

 

$

620,144

 

$

385,062

 

$

4,905,360

 


(1)          The interest on the Industrial Development Bond assumes the current rate of 3.86%. The interest rate set by the remarketing agent is consistent with 30-day tax-exempt commercial paper.

(2)          A “purchase obligation” is defined as an agreement to purchase goods or services that is enforceable and legally binding on the company and that specifies all significant terms, including: fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. These amounts are primarily comprised of open purchase order commitments to vendors and subcontractors pertaining to fulfillment of our current order backlog.

Off-Balance Sheet Arrangements

The Company does not have any off-balance sheet arrangements.

23




Inflation

We do not believe that inflation has had a material effect on our financial position or results of operations during the past three years. However, we cannot predict the future effects of inflation.

Critical Accounting Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. The Company’s most critical accounting policies are revenue recognition, income taxes, allowance for doubtful accounts, inventory valuation, share-based compensation and warranty reserves.

The Company recognizes sales for products when the following revenue recognition criteria are met: persuasive evidence of an arrangement exists, product delivery and acceptance has occurred, pricing is fixed or determinable and collection is reasonably assured. The Company recognizes sales upon shipment of products to customers.

Sales related to certain long-term contracts requiring development and delivery of products over several accounting periods are accounted for under the American Institute of Certified Public Accountants (AICPA) Statement of Position (SOP) 81-1, Accounting for Performance of Construction-Type and Certain Production-Type Contracts. We consider the nature of these contracts as well as the types of products and services provided when determining the appropriate accounting treatment for a particular contract. Certain long-term contracts are recorded on a percentage of completion basis using cost-to-cost methodology to measure progress towards completion.

The Company offers its customers extended warranties for additional fees. These warranty sales are recorded as deferred revenue and recognized as sales on a straight-line basis over the warranty period.

The Company enters into certain sales arrangements that include multiple deliverables as defined in Emerging Issues Task Force (EITF) Issue No. 00-21, Accounting for Revenue Arrangements with Multiple Deliverables. Effective July 1, 2003, the Company identifies all goods and/or services that are to be delivered separately under a sales arrangement and allocates revenue to each deliverable based on fair value that is established with the customer during contract negotiations. In general, revenues are separated between product sales and non-recurring engineering services. The allocated revenue for each deliverable is then recognized using appropriate revenue recognition methods. Effective for transactions entered into after October 1, 2003, the Company accounts for transactions with software and non-software components under EITF Issue 03-5, “Applicability of AICPA Statement of Position 97-2, Software Revenue Recognition, to Non-Software Deliverables in an Arrangement Containing More-Than-Incidental Software.”

Income taxes are recorded in accordance with SFAS No. 109, Accounting for Income Taxes. Provisions for federal and state income taxes are calculated on reported financial statement pre-tax income based on current tax law. The Company recognizes deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of the Company’s assets and liabilities and expected benefits of utilizing net operating loss carryforwards. The impact on deferred taxes of changes in tax rates and laws, if any, applied to the years during which temporary differences are expected to be settled, are reflected in the consolidated financial statements in the period of enactment.

We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. These allowances are determined by analyzing historical data and trends. If actual losses are greater than estimated amounts or if the financial condition of our

24




customers were to deteriorate, resulting in an impairment of their ability to make payments, future results from operations could be adversely affected.

Inventories are written down for estimated obsolescence equal to the difference between the cost of inventory and the estimated net realizable value based upon assumptions about future market conditions. If actual future demand or market conditions are less favorable than those projected by management, additional inventory write-downs may be required.

We offer warranties on some products of various lengths. At the time of shipment, we establish a reserve for the estimated cost of warranties based on our best estimate of the amounts necessary to settle future and existing claims using historical data on products sold as of the balance sheet date. The length of the warranty period, the product’s failure rates and the customer’s usage affects warranty cost. If the actual cost of warranties differs from our estimated amounts, future results of operations could be adversely affected.

Effective October 1, 2005 the Company adopted the provisions of SFAS 123R, using the modified prospective approach and now accounts for share-based compensation applying the fair value method for expensing stock options. Accordingly, the adoption of SFAS 123R’s fair value method results in compensation costs under the Company’s 1998 Stock Option Plan.

New Accounting Pronouncements

In September 2006, the Financial Accounting Standards Board (FASB) issued Statement of Financial Accounting Standards (SFAS) No. 157, Fair Value Measurements (“SFAS 157”). SFAS 157 defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles, and expands disclosures about fair value measurements. This statement does not require any new fair value measurements; however, the application of this Statement may change current practice for some entities. SFAS 157 is effective for fiscal years beginning after November 15, 2007. The Company is currently evaluating the impact of this pronouncement.

In September 2006, the Securities and Exchange Commission issued Staff Accounting Bulletin 108, “Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements” (“SAB 108”). SAB 108 provides guidance on how prior year misstatements should be taken into consideration when quantifying misstatements in current year financial statements for purposes of determining whether the current year’s financial statements are materially misstated. SAB 108 is effective for the first fiscal year ending after November 15, 2006. The Company is in the process of evaluating the impact of the adoption of this interpretation and does not believe that the adoption of the SAB 108 will have a material impact on the Company’s financial position or results of operations.

In July 2006, the FASB issued FASB Interpretation 48, “Accounting for Uncertainty in Income Taxes—an interpretation of FASB Statement No. 109” (“FIN 48”). FIN 48 clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with FASB Statement No. 109, “Accounting for Income Taxes.” This Interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. This Interpretation also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. FIN 48 is effective for fiscal years beginning after December 15, 2006. The Company is currently evaluating the impact of this pronouncement.

In May 2005, the FASB issued SFAS No. 154, “Accounting Changes and Error Corrections—a replacement of APB Opinion No. 20 and FASB Statement No. 3.”  SFAS No. 154 requires retrospective application to prior periods’ financial statements of changes in accounting principle, unless it is impracticable to determine either the period-specific effects or the cumulative effect of the change.

25




SFAS No. 154 also requires that retrospective application of a change in accounting principle be limited to the direct effects of the change. Indirect effects of a change in accounting principle, such as a change in nondiscretionary profit-sharing payments resulting from an accounting change, should be recognized in the period of the accounting change. SFAS No. 154 also requires that a change in depreciation, amortization, or depletion method for long-lived, non-financial assets be accounted for as a change in accounting estimate effected by a change in accounting principle. SFAS No. 154 is effective for accounting changes and corrections of errors made in fiscal years beginning after December 15, 2005. Early adoption is permitted for accounting changes and corrections of errors made in fiscal years beginning after the date this Statement is issued. The Company will adopt the provisions of SFAS No. 154 as applicable beginning in fiscal 2007.

In December 2004, the FASB issued FASB Staff Position (FSP) FAS 109-1, “Application of FASB Statement No. 109, Accounting for Income Taxes, to the Tax Deduction on Qualified Production Activities Provided by the American Jobs Creation Act of 2004.” This FSP provides guidance on the application of Statement 109 to the provisions within the American Jobs Creation Act of 2005 (the Act), which provides tax relief to U.S. domestic manufacturers. The FSP states that a manufacturer’s deduction provided for under the Act should be accounted for as a special deduction in accordance with Statement 109 and not as a tax rate reduction. The FSP also reminds preparers that the special deduction should be considered by an enterprise in (a) measuring deferred taxes when the enterprise is subjected to graduated tax rates, and (b) assessing whether a valuation allowance is necessary as required by Statement 109. This statement was effective immediately. The Company adopted this statement during fiscal year 2005 and it did not have a material impact on the Company’s financial position or results of operations.

In November 2004, the FASB issued SFAS 151, “Inventory Costs.” This Statement amends the guidance in ARB No. 43, Chapter 4 “Inventory Pricing,” to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs, and wasted material (spoilage). Paragraph 5 of ARB 43, Chapter 4 previously stated that “... under some circumstances, items such as idle facility expense, excessive spoilage, double freight, and rehandling costs may be so abnormal as to require treatment as current period charges....” This Statement requires that those items be recognized as current-period charges regardless of whether they meet the criterion of “so abnormal.” In addition, this Statement requires that allocation of fixed production overheads to the costs of conversion be based on the normal capacity of the production facilities. This statement is effective for inventory costs incurred during fiscal years beginning after June 15, 2005. The Company adopted this statement on October 1, 2005 and it did not have a material impact on the Company’s financial position or results of operations.

Business Segments

The Company operates in one principal business segment which designs, manufactures and sells flight information computers, large flat-panel displays and advanced monitoring systems to the DoD, government agencies, defense contractors, commercial air transport carriers and corporate/general aviation markets. The Company currently derives virtually all of its revenues from the sale of this equipment. Almost all of the Company’s sales, operating results and identifiable assets are in the United States. Net sales, operating results, and identifiable assets outside of the U.S. are not significant.

In Fiscal Year 2006 net sales outside the United States amounted to $2.8 million. Of this amount, $1.5 million was with Canada’s Department of National Defense.

Item 7A.                Quantitative and qualitative disclosures about market risk.

The Company’s operations are exposed to market risks primarily as a result of changes in interest rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company’s exposure to market risk for changes in interest rates relates to its cash equivalents and an

26




industrial revenue bond. The Company’s cash equivalents consist of funds invested in money market accounts, which bear interest at a variable rate, while the industrial revenue bond carries an interest rate that is consistent with 30-day tax-exempt commercial paper. As the interest rates are variable, a change in interest rates earned on the cash equivalents or paid on the industrial revenue bond, would impact interest income and expense along with cash flows, but would not impact the fair market value of the related underlying instruments.

Item 8.                        Financial statements and supplementary data.

The financial statements of Innovative Solutions and Support, Inc. listed in the index appearing under Item 8 herein are filed as part of this Report.

 

27




Innovative Solutions and Support, Inc.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

Page

 

Report of Independent Registered Public Accounting Firm

 

29

 

Consolidated Balance Sheets

 

30

 

Consolidated Statements of Operations

 

31

 

Consolidated Statements of Shareholders’ Equity

 

32

 

Consolidated Statements of Cash Flows

 

33

 

Notes to Consolidated Financial Statements

 

34-46

 

 

28




REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of
Innovative Solutions and Support, Inc.
Exton, Pennsylvania

We have audited the accompanying consolidated balance sheets of Innovative Solutions and Support, Inc. and subsidiaries (the “Company”) as of September 30, 2006 and 2005, and the related consolidated statements of operations, cash flows, and shareholders’ equity for each of the three years in the period ended September 30, 2006. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of September 30, 2006 and 2005, and the results of its operations and its cash flows for each of the three years in the period ended September 30, 2006 in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the effectiveness of the Company’s internal control over financial reporting as of September 30, 2006, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated December 7, 2006 expressed an unqualified opinion on management’s assessment of the effectiveness of the Company’s internal control over financial reporting and an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

 

Philadelphia, Pennsylvania

December 7, 2006

 

29




INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED BALANCE SHEETS

 

 

As of

 

As of

 

 

 

September 30, 2006

 

September 30, 2005

 

ASSETS

 

 

 

 

 

 

 

 

 

Current Assets:

 

 

 

 

 

 

 

 

 

Cash and cash equivalents

 

 

$

62,984,829

 

 

 

$

83,172,582

 

 

Accounts receivable, less allowance for doubtful accounts of $100,000 at September 30, 2006 and 2005

 

 

3,333,131

 

 

 

5,479,936

 

 

Inventories

 

 

6,466,156

 

 

 

3,911,626

 

 

Deferred income taxes

 

 

1,082,931

 

 

 

956,070

 

 

Prepaid expenses and other current assets

 

 

4,065,696

 

 

 

4,028,498

 

 

Total current assets

 

 

77,932,743

 

 

 

97,548,712

 

 

Property and Equipment:

 

 

 

 

 

 

 

 

 

Computers and test equipment

 

 

4,592,410

 

 

 

4,278,748

 

 

Corporate airplane

 

 

3,027,502

 

 

 

2,998,161

 

 

Furniture and office equipment

 

 

748,827

 

 

 

734,038

 

 

Manufacturing facility

 

 

5,426,761

 

 

 

5,420,741

 

 

Land

 

 

1,021,245

 

 

 

1,021,245

 

 

 

 

 

14,816,745

 

 

 

14,452,933

 

 

Less—Accumulated depreciation and amortization

 

 

(5,846,272

)

 

 

(5,091,881

)

 

Net property and equipment

 

 

8,970,473

 

 

 

9,361,052

 

 

Deposits and other assets

 

 

329,664

 

 

 

125,114

 

 

Total assets

 

 

$

87,232,880

 

 

 

$

107,034,878

 

 

LIABILITIES AND SHAREHOLDERS’ EQUITY

 

 

 

 

 

 

 

 

 

CURRENT LIABILITIES:

 

 

 

 

 

 

 

 

 

Current portion of notes payable

 

 

$

100,000

 

 

 

$

100,000

 

 

Current portion of capitalized lease obligations

 

 

7,891

 

 

 

7,257

 

 

Accounts payable

 

 

358,818

 

 

 

305,516

 

 

Accrued expenses

 

 

3,122,542

 

 

 

3,503,814

 

 

Deferred revenue

 

 

591,626

 

 

 

176,650

 

 

Total current liabilities

 

 

4,180,877

 

 

 

4,093,237

 

 

Note payable

 

 

4,235,000

 

 

 

4,235,000

 

 

Long-term portion of capitalized lease obligations

 

 

4,587

 

 

 

13,113

 

 

Deferred revenue

 

 

120,991

 

 

 

191,463

 

 

Deferred income taxes

 

 

490,072

 

 

 

635,967

 

 

Commitments and contingencies

 

 

 

 

 

 

 

Shareholders’ Equity:

 

 

 

 

 

 

 

 

 

Preferred stock, 10,000,000 shares authorized, $.001par value, of which 200,000 shares are authorized as Class A Convertible stock. No shares issued and outstanding at September 30, 2006 and 2005.

 

 

 

 

 

 

 

Common stock, $.001 par value: 75,000,000 shares authorized, 18,088,121 and 18,047,425 shares issued and outstanding at September 30, 2006 and 2005

 

 

18,088

 

 

 

18,047

 

 

Additional paid-in capital

 

 

43,230,352

 

 

 

41,926,318

 

 

Retained earnings

 

 

53,039,341

 

 

 

55,921,733

 

 

Treasury stock, at cost, 1,272,510 and 0 shares at September 30, 2006 and 2005

 

 

(18,086,428

)

 

 

 

 

Total shareholders’ equity

 

 

78,201,353

 

 

 

97,866,098

 

 

Total liabilities and shareholders’ equity

 

 

$

87,232,880

 

 

 

$

107,034,878

 

 

 

The accompanying notes are an integral part of these statements.

30




INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS

 

 

For the Fiscal Year Ended September 30,

 

 

 

2006

 

2005

 

2004

 

Net sales

 

$

16,721,967

 

$

63,264,359

 

$

46,099,777

 

Cost of sales

 

8,631,761

 

20,888,729

 

15,663,108

 

Gross profit

 

8,090,206

 

42,375,630

 

30,436,669

 

Operating expenses:

 

 

 

 

 

 

 

Research and development

 

6,749,426

 

6,057,889

 

4,811,156

 

Selling, general and administrative

 

9,863,758

 

8,898,622

 

7,567,959

 

 

 

16,613,184

 

14,956,511

 

12,379,115

 

Operating income (loss)

 

(8,522,978

)

27,419,119

 

18,057,554

 

Interest income

 

3,280,179

 

1,939,397

 

532,745

 

Interest expense

 

(188,193

)

(175,151

)

(128,018

)

Income (loss) before income taxes

 

(5,430,992

)

29,183,365

 

18,462,281

 

Income taxes (benefit)

 

(2,548,600

)

10,598,563

 

6,530,084

 

Net income (loss)

 

$

(2,882,392

)

$

18,584,802

 

$

11,932,197

 

Net Income (loss) per common share:

 

 

 

 

 

 

 

Basic

 

$

(0.17

)

$

1.04

 

$

0.69

 

Diluted

 

$

(0.17

)

$

1.02

 

$

0.67

 

Weighted average shares outstanding:

 

 

 

 

 

 

 

Basic

 

17,388,524

 

17,873,780

 

17,400,380

 

Diluted

 

17,388,524

 

18,259,856

 

17,928,180

 

 

The accompanying notes are an integral part of these statements.

31




INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

 

 

Common
Stock

 

Additional
Paid-in
Capital

 

Retained
Earnings

 

Treasury
Stock

 

Total

 

Balance, September 30, 2003

 

$

13,081

 

$

46,248,224

 

$

25,410,743

 

$

(10,613,757

)

$

61,058,291

 

Exercise of options to purchase common stock

 

133

 

1,553,662

 

 

 

1,553,795

 

Exercise of warrants to purchase common stock

 

281

 

614,317

 

 

 

614,598

 

Issuance of stock to directors

 

20

 

296,086

 

 

 

296,106

 

Net income

 

 

 

11,932,197

 

 

11,932,197

 

Balance, September 30, 2004

 

13,515

 

48,712,289

 

37,342,940

 

(10,613,757

)

75,454,987

 

Exercise of options to purchase common stock

 

201

 

3,562,132

 

 

 

3,562,333

 

Effect of stock split (3 -for-2)

 

6,009

 

 

(6,009

)

 

 

 

 

Issuance of stock to directors

 

12

 

263,964

 

 

 

 

 

263,976

 

Retirement of treasury stock

 

(1,690

)

(10,612,067

)

 

 

10,613,757

 

 

Net income

 

 

 

18,584,802

 

 

18,584,802

 

Balance, September 30, 2005

 

18,047

 

41,926,318

 

55,921,733

 

 

97,866,098

 

Exercise of options to purchase common stock

 

25

 

408,779

 

 

 

 

 

408,804

 

Share-based compensation

 

 

 

655,351

 

 

 

 

 

655,351

 

Issuance of stock to directors

 

16

 

239,904

 

 

 

 

 

239,920

 

Purchase of treasury stock

 

 

 

 

 

 

 

(18,086,428

)

(18,086,428

)

Net loss

 

 

 

 

 

(2,882,392

)

 

 

(2,882,392

)

Balance, September 30, 2006

 

$

18,088

 

$

43,230,352

 

$

53,039,341

 

$

(18,086,428

)

$

78,201,353

 

 

The accompanying notes are an integral part of these statements.

32




INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS

 

 

For the Fiscal Year Ended September 30,

 

 

 

2006

 

2005

 

2004

 

CASH FLOWS FROM OPERATING ACTIVITIES:

 

 

 

 

 

 

 

Net income (loss)

 

$

(2,882,392

)

$

18,584,802

 

$

11,932,197

 

Adjustments to reconcile net income to net cash provided by (used in) operating activities:

 

 

 

 

 

 

 

Depreciation and amortization

 

858,641

 

797,990

 

729,993

 

Stock-based compensation expense

 

655,351

 

 

 

Compensation expense for stock issued to directors

 

239,920

 

263,976

 

296,106

 

Loss on disposal of fixed assets

 

22,066

 

1,253

 

1,660

 

Excess and obsolete inventory expense

 

38,861

 

32,697

 

(118,298

)

Disposal of obsolete inventory

 

 

23,522

 

163,856

 

Deferred income taxes

 

(272,756

)

252,151

 

83,680

 

Tax benefit from exercise of stock options

 

219,509

 

1,716,659

 

381,469

 

Excess tax benefits from share-based payments arrangements

 

(44,504

)

 

 

(Increase) decrease in:

 

 

 

 

 

 

 

Accounts receivable

 

2,146,805

 

(476,836

)

1,952,107

 

Inventories

 

(2,593,391

)

1,223,783

 

(2,396,538

)

Prepaid expenses and other current assets

 

(35,348

)

(3,363,222

)

(55,966

)

Increase (decrease) in:

 

 

 

 

 

 

 

Accounts payable

 

53,302

 

(1,390,731

)

1,117,941

 

Accrued expenses

 

(381,272

)

(1,250,827

)

1,647,350

 

Deferred revenue

 

344,504

 

(419,844

)

357,514

 

Net cash provided by (used in) operating activities

 

(1,630,704

)

15,995,373

 

16,093,071

 

CASH FLOWS FROM INVESTING ACTIVITIES:

 

 

 

 

 

 

 

Purchases of property and equipment

 

(456,528

)

(528,064

)

(791,393

)

Purchases of other assets

 

(240,000

)

 

 

Net cash used in investing activities

 

(696,528

)

(528,064

)

(791,393

)

CASH FLOWS FROM FINANCING ACTIVITIES:

 

 

 

 

 

 

 

Proceeds from exercise of stock options

 

189,295

 

1,845,674

 

1,127,991

 

Proceeds from exercise of warrants

 

 

 

658,934

 

Purchase of treasury stock

 

(18,086,428

)

 

 

Repayment of capitalized lease obligations

 

(7,892

)

(7,568

)

(11,180

)

Excess tax benefits from share-based payments arrangements

 

44,504

 

 

 

Net cash provided by (used in) financing activities

 

(17,860,521

)

1,838,106

 

1,775,745

 

Net increase (decrease) in cash and cash equivalents

 

(20,187,753

)

17,305,415

 

17,077,423

 

Cash and cash equivalents, beginning of year

 

83,172,582

 

65,867,167

 

48,789,744

 

Cash and cash equivalents, end of year

 

$

62,984,829

 

$

83,172,582

 

$

65,867,167

 

SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION

 

 

 

 

 

 

 

Cash paid for interest

 

$

147,332

 

$

102,192

 

$

53,711

 

Cash paid for income taxes

 

$

457,672

 

$

8,600,619

 

$

5,991,777

 

Cash received from income tax refund

 

$

(3,278,844

)

 

 

 

The accompanying notes are an integral part of these statements.

33




1.                 Background:

Innovative Solutions and Support, Inc., (the “Company”), was incorporated in Pennsylvania on February 12, 1988. The Company’s primary business is the design, manufacture and sale of flight information computers, large flat panel displays and advanced monitoring systems to the Department of Defense (DoD), defense contractors, commercial air transport and corporate/general aviation markets.

On June 13, 2005, the Company’s Board of Directors approved a three-for-two split of the Company’s common stock. The stock split was in the form of a fifty percent (50%) stock dividend that was paid on July 7, 2005 to shareholders of record on June 23, 2005. The issued and outstanding common stock and all share and per share amounts (except par value) have been retroactively restated in this report to give effect to this three-for-two stock split. A transfer from Retained Earnings to Common Stock of $6,009 was required as a result of no change to par value.

2.                 Concentrations:

Major Customers and Products

In fiscal 2006, 2005 and 2004 the Company derived 47%, 47% and 46% of net sales from five customers, although not all the same customers in each year. The accounts receivable related to the Company’s top five customers was $1.8 million, $.4 million and $1.0 million for fiscal 2006, 2005 and 2004 respectively.

The Company recorded sales with the DOD that amounted to 17% of total sales for fiscal year 2006.

In addition, sales of air data systems and components were 62%, 94% and 97% of total sales for the years ended September 30, 2006, 2005 and 2004, respectively. Flat Panel sales were 38%, 6% and 2% of net sales in the years ended September 30, 2006, 2005 and 2004 respectively. Sales to government contractors and agencies accounted for approximately 51%, 20% and 7% respectively, of the Company’s net sales during fiscal 2006, 2005 and 2004.

Major Suppliers

The Company currently buys several of its components from sole source suppliers. Although there are a limited number of manufacturers of the particular components, management believes that other suppliers could provide similar components on comparable terms.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentration of credit risk consist principally of cash balances and accounts receivable. The Company invests its excess cash where preservation of principal is the major consideration. The Company’s customer base principally consists of companies within the aviation industry. The Company routinely requests advance payments and/or letters of credit from new customers.

The Company also maintains a reserve for doubtful accounts in the amount of $100,000 and had accounts receivable write-offs of $0, $2,500 and $0 in fiscal 2006, 2005, and 2004 respectively.

3.                 Summary Of Significant Accounting Policies:

Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its subsidiaries. All material inter-company balances and transactions were eliminated.

34




Use of Estimates

Preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities, as of the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ materially from those estimates.

Cash and Cash Equivalents

Highly liquid investments purchased with an original maturity of three months or less are classified as cash equivalents. Cash equivalents at September 30, 2006 and 2005 consist of funds invested in money market accounts with financial institutions.

Inventories

Inventories are stated at the lower of cost (first-in, first-out) or market and consist of the following:

 

 

September 30,

 

 

 

2006

 

2005

 

Raw materials

 

$

3,006,088

 

$

1,696,050

 

Work-in-process

 

2,237,489

 

1,151,828

 

Finished goods

 

1,222,579

 

1,063,748

 

 

 

$

6,466,156

 

$

3,911,626

 

 

Property and Equipment

Property and equipment are stated at cost. Depreciation is provided using an accelerated method over the estimated useful lives of the assets (the lesser of three to seven years or over the lease term), except for the airplane and manufacturing facility, which are depreciated over a straight-line method. Major additions and improvements are capitalized, while maintenance and repairs that do not improve or extend the life of assets are charged to expense as incurred. Depreciation expense was $825,041, $785,990 and $717,993 for the fiscal years ended 2006, 2005 and 2004.

Long-Lived Assets

The Company assesses the impairment of long-lived assets in accordance with SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets. This statement requires that long-lived assets be reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Also, in general, long-lived assets to be disposed of should be reported at the lower of the carrying amount or fair value less cost to sell. The Company considers historical performance and future estimated results in its evaluation of potential impairment and then compares the carrying amount of the asset to the estimated future cash flows expected to result from the use of the asset. If the carrying amount of the asset exceeds the estimated expected undiscounted future cash flows, the Company measures the amount of the impairment by comparing the carrying amount of the asset to its fair value. The estimation of fair value is generally measured by discounting expected future cash flows. No impairment charges were recorded in fiscal 2006, 2005, and 2004, respectively.

Revenue Recognition

The Company recognizes sales of products when the following revenue recognition criteria are met: persuasive evidence of an arrangement exists, product delivery and acceptance has occurred, pricing is

35




fixed or determinable, and collection is reasonably assured. The Company essentially recognizes sales upon shipment of products to customers.

Sales related to certain long-term contracts requiring development and delivery of products over several accounting periods are accounted for under the American Institute of Certified Public Accountants (AICPA) Statement of Position (SOP) 81-1, Accounting for Performance of Construction-Type and Certain Production-Type Contracts and the amounts are not significant for fiscal years 2006, 2005 and 2004.

The Company offers its customers extended warranties for additional fees. These warranty sales are recorded as deferred revenue and recognized as sales on a straight-line basis over the warranty period.

The Company enters into certain sales arrangements that include multiple deliverables as defined in Emerging Issues Task Force (EITF) Issue No. 00-21, Accounting for Revenue Arrangements with Multiple Deliverables. Effective July 1, 2003, the Company identifies all goods and/or services that are to be delivered separately under a sales arrangement and allocates revenue to each deliverable based on fair value that is established using vendor-specific objective evidence. In general, revenues are separated between product sales and non-recurring engineering services. The allocated revenue for each deliverable is then recognized using appropriate revenue recognition methods.

Warranty

Estimated cost to repair or replace products under warranty is provided when sales of product are recorded.

Income Taxes

Income taxes are recorded in accordance with SFAS No. 109, “Accounting for Income Taxes” (see Note 7).

Research and Development

Research and development charges incurred for product enhancements and future product development are recorded as expense as incurred.

Comprehensive Income

Pursuant to SFAS No. 130, “Reporting Comprehensive Income,” the Company would be required to classify items of other comprehensive income by their nature in a financial statement and display the accumulated balance of other comprehensive income separately from retained earnings and additional paid-in capital in the equity section of a statement of financial position. Comprehensive income consists of net income and there were no items of other comprehensive income for any of the periods presented.

Fair Value of Financial Instruments

The estimated fair value amounts presented in these consolidated financial statements were determined by the Company using available market information and appropriate methodologies. The Company’s financial instruments consist primarily of cash and cash equivalents, accounts receivable, accounts payable, accrued liabilities and debt instruments. The carrying values of these assets and liabilities are considered to be representative of the respective fair values based on pertinent information available to management as of September 30, 2006 and 2005.

36




Stock-Based Compensation

On December 16, 2004, the FASB finalized SFAS No. 123(R) Share-Based Payment (SFAS 123(R)). SFAS 123(R) amends SFAS 123 and supersedes APB 25. SFAS 123(R) requires that the cost of share-based payment transactions (including those with employees and non-employee directors) be recognized in the financial statements. SFAS 123(R) applies to all share-based payment transactions in which an entity acquires goods or services by issuing (or offering to issue) its shares, share options, or other equity instruments (except for those held by an Employee Stock Option Plan (ESOP)) or by incurring liabilities (1) in amounts based (even in part) on the price of the entity’s shares or other equity instruments, or (2) that require (or may require) settlement by the issuance of an entity’s shares or other equity instruments. This statement was effective as of the first annual reporting period beginning after June 15, 2005, which is the Company’s fiscal year beginning October 1, 2005.

Effective October 1, 2005 the Company adopted the provisions of SFAS 123(R), using the modified prospective approach and now accounts for share-based compensation applying the fair value method for expensing stock options. Accordingly, the adoption of SFAS 123R’s fair value method resulted in compensation costs under the Company’s 1998 Stock Option Plan. The compensation cost that was charged against income as a result of adoption of SFAS 123(R) for the plan was $655,351 for the fiscal year ended September 30, 2006. The total income tax benefit recognized in the statement of operations for share-based compensation arrangements was $307,360 for the fiscal year ended September 30, 2006.

Share-based compensation costs prior to October 1, 2005 were recognized using the intrinsic value method in accordance with Accounting Principles Board Opinion (“APB”) No. 25, “Accounting for Stock Issued to Employees.” For disclosure purposes, pro forma net income and net income per share data were provided in accordance with SFAS No. 123, “Accounting for Stock-Based Compensation,” as if the fair value method had been applied. Under SFAS No. 123, compensation cost related to stock options granted to employees is computed based on the fair value of the stock option at the date of grant using the Black-Scholes option pricing model. Had the Company recognized compensation cost for its stock option plans consistent with the provisions of SFAS 123, the Company’s pro forma net income for the periods ended September 30, 2005 and 2004 would have been as follows:

 

 

September 30,

 

 

 

2005

 

2004

 

Net income as reported

 

$

18,584,802

 

$

11,932,197

 

Deduct fair market value expense:

 

 

 

 

 

Employee stock options(1)

 

(814,736

)

(745,329

)

Pro forma net income (loss)

 

$

17,770,066

 

$

11,186,868

 

Basic earnings per share

 

 

 

 

 

As reported

 

$

1.04

 

$

0.69

 

Pro forma

 

$

0.99

 

$

0.64

 

Diluted earnings per share :

 

 

 

 

 

As reported

 

$

1.02

 

$

0.67

 

Pro forma

 

$

0.97

 

$

0.63

 


(1)          Amounts represent compensation expense if it had been determined under the fair market value based method, net of related tax effect.

37




New Accounting Pronouncements

In September 2006, the Financial Accounting Standars Borad (FASB) issued Statement of Financial Accounting Standards (SFAS) No. 157, Fair Value Measurements (“SFAS 157”). SFAS 157 defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles, and expands disclosures about fair value measurements. This statement does not require any new fair value measurements; however, the application of this Statement may change current practice for some entities. SFAS 157 is effective for fiscal years beginning after November 15, 2007. The Company is currently evaluating the impact of this pronouncement.

In September 2006, the Securities and Exchange Commission issued Staff Accounting Bulletin 108, “Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements” (“SAB 108”).  SAB 108 provides guidance on how prior year misstatements should be taken into consideration when quantifying misstatements in current year financial statements for purposes of determining whether the current year’s financial statements are materially misstated. SAB 108 is effective for the first fiscal year ending after November 15, 2006. The Company is in the process of evaluating the impact of the adoption of this interpretation and does not believe that the adoption of the SAB 108 will have a material impact on the Company’s financial position or results of operations.

In July 2006, the FASB issued FASB Interpretation 48, “Accounting for Uncertainty in Income Taxes—an interpretation of FASB Statement No. 109” (“FIN 48”). FIN 48 clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with FASB Statement No. 109, “Accounting for Income Taxes”. This Interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. This Interpretation also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. FIN 48 is effective for fiscal years beginning after December 15, 2006. The Company is currently evaluating the impact of this pronouncement.

In May 2005, the FASB issued SFAS No. 154, “Accounting Changes and Error Corrections—a replacement of APB Opinion No. 20 and FASB Statement No. 3.”   SFAS No. 154 requires retrospective application to prior periods’ financial statements of changes in accounting principle, unless it is impracticable to determine either the period-specific effects or the cumulative effect of the change. SFAS No. 154 also requires that retrospective application of a change in accounting principle be limited to the direct effects of the change. Indirect effects of a change in accounting principles, such as a change in nondiscretionary profit-sharing payments resulting from an accounting change, should be recognized in the period of the accounting change. SFAS No. 154 also requires that a change in depreciation, amortization, or depletion method for long-lived, non-financial assets be accounted for as a change in accounting estimate effected by a change in accounting principle. SFAS No. 154 is effective for accounting changes and corrections of errors made in fiscal years beginning after December 15, 2005. Early adoption is permitted for accounting changes and corrections of errors made in fiscal years beginning after the date this Statement is issued. The Company will adopt the provisions of SFAS No. 154 as applicable beginning in fiscal 2007.

In December 2004, the FASB issued FASB Staff Position (FSP) FAS 109-1, “Application of FASB Statement No. 109, Accounting for Income Taxes, to the Tax Deduction on Qualified Production Activities Provided by the American Jobs Creation Act of 2004.”. This FSP provides guidance on the application of Statement 109 to the provisions within the American Jobs Creation Act of 2005 (the Act), which provides tax relief to U.S. domestic manufacturers. The FSP states that a manufacturer’s deduction provided for under the Act should be accounted for as a special deduction in accordance with Statement 109 and not as a tax rate reduction. The FSP also reminds preparers that the special deduction should be considered by an enterprise in (a) measuring deferred taxes when the enterprise is subjected to graduated tax rates, and

38




(b) assessing whether a valuation allowance is necessary as required by Statement 109. This statement is effective immediately. The Company adopted this statement during fiscal year 2005 and it did not have a material impact on the Company’s financial position or results of operations.

In November 2004, the FASB issued SFAS 151, “Inventory Costs.” This Statement amends the guidance in ARB No. 43, Chapter 4 “Inventory Pricing,” to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs, and wasted material (spoilage). Paragraph 5 of ARB 43, Chapter 4 previously stated that “… under some circumstances, items such as idle facility expense, excessive spoilage, double freight, and rehandling costs may be so abnormal as to require treatment as current period charges…”. This Statement requires that those items be recognized as current-period charges regardless of whether they meet the criterion of “so abnormal.” In addition, this Statement requires that allocation of fixed production overheads to the costs of conversion be based on the normal capacity of the production facilities. This statement is effective for inventory costs incurred during fiscal years beginning after June 15, 2005. The Company adopted this statement on October 1, 2005 and it did not have a material impact on the Company’s financial position or results of operations.

4.                 Net Income Per Share:

Net income per share is calculated pursuant to SFAS No. 128, “Earnings per Share” (EPS). Basic EPS excludes potentially dilutive securities and is computed by dividing net income by the weighted-average number of Common shares outstanding for the period. Diluted EPS is computed assuming the conversion or exercise of all dilutive securities such as preferred stock, options and warrants.

Under SFAS No. 128, the Company’s granting of certain stock options, warrants and convertible preferred stock resulted in potential dilution of basic EPS. The following table summarizes the differences between basic weighted-average shares outstanding and diluted weighted-average shares outstanding used to compute diluted EPS.

 

 

For the Fiscal Year Ended September 30,

 

 

 

2006

 

2005

 

2004

 

Weighted average number of shares-basic

 

17,388,524

 

17,873,780

 

17,400,380

 

Effect of dilutive securities:

 

 

 

 

 

 

 

Stock Options

 

 

 

386,076

 

417,764

 

Warrants

 

 

 

0

 

110,036

 

Weighted average number of shares-diluted

 

17,388,524

 

18,259,856

 

17,928,180

 

 

The number of incremental shares from the assumed exercise of stock options and warrants is calculated by using the treasury stock method. For the fiscal years ended September 30, 2006, 2005 and 2004, there were 462,281, 50,500 and 12,587 options outstanding, respectively, that were excluded from the computation of diluted earnings per share as the effect would be anti-dilutive.

39




5.                 Accrued Expenses:

Accrued expenses consist of the following:

 

September 30,

 

 

 

2006

 

2005

 

Salary, benefits and payroll taxes

 

$

471,576

 

$

881,602

 

Warranty

 

617,116

 

770,845

 

Income taxes payable

 

622,295

 

1,051,963

 

Professional fees

 

970,597

 

361,250

 

Other

 

440,958

 

438,154

 

 

 

$

3,122,542

 

$

3,503,814

 

 

6.                 Warranty:

The Company provides for the estimated cost of product warranties at the time revenue is recognized. Warranty cost is recorded as cost of sales in the financial statements. While the Company engages in extensive product quality programs and processes, the Company’s warranty obligation is affected by product failure rates and the related material, labor and delivery costs incurred in correcting a product failure. Should actual product failure rates, material or labor costs differ from the Company’s estimates, revisions to the estimated warranty liability would be required.

Warranty cost and accrual information for the fiscal period ended September 30, 2006 is highlighted below:

Warranty accrual at September 30, 2005

 

$

770,845

 

Accrued expense for the year ended September 30, 2006

 

65,709

 

Warranty costs for the year ended September 30, 2006

 

(219,438

)

Warranty accrual at September 30, 2006

 

$

617,116

 

 

Warranty cost and accrual information for the fiscal period ended September 30, 2005 is highlighted below:

Warranty accrual at September 30, 2004

 

$

757,476

 

Accrued expense for the year ended September 30, 2005

 

186,558

 

Warranty costs for the year ended September 30, 2005

 

(173,189

)

Warranty accrual at September 30, 2005

 

$

770,845

 

 

7.                 Income Taxes:

The Company accounts for income taxes under SFAS No. 109, which generally provides that deferred tax assets and liabilities be recognized for temporary differences between the financial reporting basis and the tax basis of the Company’s assets and liabilities and expected benefits of utilizing net operating loss (NOL) carryforwards. The impact on deferred taxes of changes in tax rates and laws, if any, applied to the years during which temporary differences are expected to be settled are reflected in the financial statements in the period of enactment.

40




Components of income taxes are as follows:

 

 

For the Fiscal Year Ended September 30,

 

 

 

2006

 

2005

 

2004

 

Current provision (benefit):

 

 

 

 

 

 

 

Federal

 

$

(1,943,991

)

$

9,592,641

 

$

6,155,438

 

State

 

 

 

753,772

 

601,943

 

 

 

(1,943,991

)

10,346,413

 

6,757,381

 

Deferred provision (benefit):

 

 

 

 

 

 

 

Federal

 

(158,789

)

102,434

 

(195,414

)

State

 

(445,820

)

149,716

 

(31,883

)

 

 

(604,609

)

252,150

 

(227,297

)

 

 

$

(2,548,600

)

$

10,598,563

 

$

6,530,084

 

 

Following is a reconciliation of the statutory federal rate to the Company’s effective income tax rate:

 

 

For the Fiscal Year Ended September 30,

 

 

 

      2006      

 

      2005      

 

      2004      

 

Federal statutory tax rate

 

 

35.0

%

 

 

35.0

%

 

 

35.0

%

 

State income taxes, net of federal benefit

 

 

5.3

%

 

 

1.9

%

 

 

2.2

%

 

Research and development tax credits

 

 

0.5

%

 

 

-0.4

%

 

 

-1.4

%

 

Other

 

 

6.1

%

 

 

-0.2

%

 

 

-0.4

%

 

 

 

 

46.9

%

 

 

36.3

%

 

 

35.4

%

 

 

The deferred tax effect of temporary differences giving rise to the Company’s deferred tax assets and liabilities consists of the components below.

 

 

September 30,

 

 

 

2006

 

2005

 

Deferred tax assets:

 

 

 

 

 

Deferred revenue

 

$

72,312

 

$

102,372

 

Reserves and accruals

 

714,052

 

949,295

 

NOL carryforwards

 

296,567

 

 

Stock options

 

238,597

 

 

 

 

 

1,321,528

 

1,051,667

 

Deferred tax liabilities:

 

 

 

 

 

Depreciation

 

(728,669

)

(731,564

)

 

 

(728,669

)

(731,564

)

 

 

$

592,859

 

$

320,103

 

 

During the year ending September 30, 2006, the Company generated a federal net operating loss (NOLs) of approximately $5.6 million and a credit of approximately $25,000. The NOL and credit can be carried-back to previous tax years and the Company will receive a refund of its previously paid federal income tax in the approximate amount of $2.0 million.

In addition, the Company generated state NOL’s in the amount of approximztely $10.7 million. These state NOL’s can only be carried-forward resulting in a deferred tax asset of approximately $456,000, before the federal effect. These NOL’s will expire in 2026 if unused. In the opinion of management, the Company expects to be able to utilize these state NOL’s and as a result no valuation allowance has been provided.

41




8.                 Notes Payable:

The Company entered into a $4,335,000 loan agreement dated August 1, 2000 with the Chester County, Pennsylvania Industrial Development Authority. The purpose of the loan was to fund the construction of the Company’s new office and manufacturing facility. The loan matures in 2015 and carries an interest rate set by the remarketing agent that is consistent with 30-day tax-exempt commercial paper. The future maturities of this note payable are as follows as of September 30, 2006:

2007—

 

$

100,000

 

2008—

 

$

150,000

 

2009—

 

$

200,000

 

2010—

 

$

250,000

 

2011—

 

$

250,000

 

Thereafter—

 

$

3,385,000

 

 

The loan agreement requires the Company to maintain certain financial covenants including a ratio of liabilities to earnings before interest, taxes and depreciation and amortization (EBITDA), fixed charge ratio and a minimum tangible net worth. The Company was in compliance with the covenants contained in  the loan agreement as of September 30, 2005.

The Company was in violation of the financial covenants contained in the loan agreement as of June 30, 2006. The defaults were subsequently waived and an amendment to the agreement was entered into with the lender whereby the existing covenants were suspended through the fiscal quarter ending on June 30, 2007.

The interest cost related to this debt for fiscal years 2006 and 2005 was $147,000 and $100,000 respectively. The interest rate on this debt was 3.86% at September 30, 2006. The Company is also required to maintain a letter of credit in the amount of $5,000,000 covering the debt.

9.                 Savings Plan:

The Company sponsors a voluntary defined contribution savings plan covering all employees. The Company does not contribute to the plan.

10.          Shareholders’ Equity:

Common Stock

The Company issued 15,396, 15,828 and 30,855 shares of Common stock to non-employee directors, with fair values of $239,920, $263,964 and $296,086 for the years ended September 30, 2006, 2005 and 2004, respectively. The fair value of the Common Stock was charged to selling, general and administrative expense in the accompanying consolidated statements of operations. The Company accrued $49,944 at September 30, 2006 for director shares earned during the year but not issued until after year-end.

Stock Options

The Company’s 1998 Stock Option Plan (the “Plan”) provides for the granting of incentive and nonqualified stock options to employees, officers, directors and independent contractors and consultants. Through September 30, 2006, no stock options were granted to independent contractors or consultants under this plan.

42




Incentive stock options granted under the Plan have exercise prices that must be at least equal to the fair value of the common stock on the date of grant. Nonqualified stock options granted under the Plan have exercise prices that may be less than, equal to or greater than the fair value of the common stock on the date of grant. The number of shares of common stock the Company has reserved for awards under the Plan was increased, by shareholder vote at the March 31, 2005 Annual Meeting of Shareholders, from 1,889,025 to 3,389,025 shares. As of September 30, 2006 there were 1,613,419 shares remaining and available for grant.

A summary of the Plan activity for the fiscal years ended September 30, 2006, 2005 and 2004, is as follows:

 

 

 

 

Range of

 

Weighted

 

 

 

 

 

 

 

Exercise

 

Average

 

Aggregate

 

 

 

 

 

Weighted

 

Exercise

 

Intrinsic

 

 

 

Options

 

Prices

 

Price

 

Value

 

Outstanding at September 30, 2003

 

899,318

 

$

1.46

-

$

9.90

 

 

$

5.85

 

 

 

 

Granted

 

190,500

 

5.41

-

18.21

 

 

10.72

 

 

 

 

Exercised

 

(200,108

)

1.83

-

9.64

 

 

5.86

 

 

 

 

Cancelled

 

(49,023

)

4.21

-

10.13

 

 

8.61

 

 

 

 

Outstanding at September 30, 2004

 

840,687

 

$

1.46

-

$

18.21

 

 

$

6.79

 

 

 

 

Granted

 

117,000

 

15.41

-

22.35

 

 

19.13

 

 

 

 

Exercised

 

(291,734

)

1.46

-

12.22

 

 

6.46

 

 

 

 

Cancelled

 

(71,700

)

4.00

-

21.17

 

 

12.51

 

 

 

 

Outstanding at September 30, 2005

 

594,253

 

$

1.46

-

$

22.35

 

 

$

8.76

 

 

 

 

Granted

 

204,000

 

12.97

-

16.00

 

 

14.36

 

 

 

 

Exercised

 

(25,300

)

4.00

-

10.13

 

 

7.48

 

 

 

 

Cancelled

 

(71,099

)

4.73

-

22.35

 

 

13.70

 

 

 

 

Outstanding at September 30, 2006

 

701,854

 

$

1.46

-

$

22.35

 

 

$

9.93

 

 

$

3,226,327

 

Options exercisable at September 30, 2006

 

374,454

 

$

1.46

-

$

22.35

 

 

$

6.35

 

 

$

3,063,811

 

 

The weighted-average fair value of the stock options granted during the fiscal years ended September 30, 2006, 2005 and 2004 were $14.36, $19.13 and $10.72 respectively. The total intrinsic value of options exercised during the fiscal year ended September 30, 2006, 2005 and 2004 were $187,000, $4.8 million and $1.5 million respectively.

The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model that uses the weighted average assumptions noted in the following table. Expected volatilities are based on historical volatility of the Company’s Common Stock, and other factors. The Company uses historical data to estimate option exercise and employee termination within the valuation model. The expected term of options is derived from historical exercise behavior and represents the period of time that options granted are expected to be outstanding. The risk-free rate for periods within the contractual life of the option is based on U.S. treasuries with constant maturities in effect at the time of grant.

 

 

Fiscal Year Ended September 30,

 

 

 

    2006    

 

    2005    

 

    2004    

 

Expected dividend rate

 

 

 

 

 

 

 

 

 

 

Expected volatility

 

 

63.7

%

 

 

66.4

%

 

 

67.4

%

 

Weighted average risk-free interest rate

 

 

2.4

%

 

 

2.0

%

 

 

1.5

%

 

Expected lives (years)

 

 

8.41

 

 

 

7.35

 

 

 

10

 

 

 

43




The following table summarizes information concerning outstanding and exercisable options at September 30, 2006:

Options Outstanding

 

Options Exercisable

 

 

 

 

 

Outstanding
As of

 

Weighted-
Average
Remaining

 

Weighted-
Average

 

As of

 

Weighted-
Average

 

Range of Exercise

 

September 30,

 

Contractual

 

Exercise

 

September 30,

 

Exercise

 

Prices

 

2006

 

Life

 

Price

 

2006

 

Price

 

 

$

0.00

-

5.00

 

 

226,305

 

 

 

4.8

 

 

 

$

4.00

 

 

 

223,605

 

 

 

$

4.00

 

 

 

$

5.01

-

10.00

 

 

156,049

 

 

 

5.5

 

 

 

$

7.67

 

 

 

111,049

 

 

 

$

7.69

 

 

 

$

10.01

-

15.00

 

 

242,000

 

 

 

9.4

 

 

 

$

14.21

 

 

 

23,400

 

 

 

$

13.81

 

 

 

$

15.01

-

20.00

 

 

61,700

 

 

 

8.9

 

 

 

$

17.59

 

 

 

13,000

 

 

 

$

17.89

 

 

 

$

20.01

-

22.35

 

 

15,800

 

 

 

8.7

 

 

 

$

21.77

 

 

 

3,400

 

 

 

$

21.73

 

 

 

 

 

 

 

 

701,854

 

 

 

7.8

 

 

 

$

9.93

 

 

 

374,454

 

 

 

$

6.35

 

 

 

As of September 30, 2006, there was approximately $2.2 million of  unrecognized compensation cost, net of forfeitures, related to non-vested stock options, which is expected to be recognized over a period of approximately 5 years.

11.          Commitments and Contingencies:

Capital Lease

The Company leases certain equipment under capital leases with terms of five years and implicit interest rates of 4.3%. The capitalized cost of $39,119 and the related accumulated amortization of $32,359 and $18,749 have been included in property and equipment at September 30, 2006 and 2005 respectively. The balance due on these leases was $12,478 and $20,370 as of September 30, 2006 and 2005 respectively. The payments for fiscal 2007 and 2008 are $7,891 and $4,587 respectively. Amortization expenses is included in depreciation expense.

Operating Leases

Rent expense under operating leases totaled $11,004, $19,994 and $20,010 for the years ended September 30, 2006, 2005 and 2004, respectively. As of September 30, 2006, future minimum payments related to all cancelable operating leases total $55,020.

Product Liability

The Company currently has product liability insurance of $50,000,000, which management believes is adequate to cover potential liabilities that may arise.

Legal Proceedings

From time to time, the Company is subject to various legal proceedings in the ordinary course of business. Management does not believe that any of the current legal proceedings will have a material adverse effect on the Company’s operations or financial condition.

12.          Related-Party Transactions:

The Company incurred legal fees of $357,000, $137,000 and $115,898 with a law firm which is a shareholder of the Company for the years ended September 30, 2006, 2005 and 2004, respectively. The fees paid and services rendered were comparable with the fees paid and services rendered prior to the law firm’s investment in the Company.

44




For the years ended September 30, 2006, 2005 and 2004, respectively, the Company incurred service fees of $25,000, $33,000 and $124,932 with a commercial graphics firm controlled by an individual who is married to a significant shareholder and the daughter of the Company’s Chairman and Chief Executive Officer.

13.          Quarterly Financial Data (unaudited):

The summarized quarterly results of operations of the Company for the years ended September 30, 2006 and September 30, 2005 are presented below:

 

 

Year Ended September 30, 2006

 

 

 

First Quarter

 

Second Quarter

 

Third Quarter

 

Fourth Quarter

 

Net sales

 

 

$

5,405,387

 

 

 

$

3,744,752

 

 

 

$

2,991,022

 

 

 

$

4,580,806

 

 

Cost of sales

 

 

2,702,018

 

 

 

2,194,718