UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended September 30, 2016
OR
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from to .
Commission File No. 000-31157
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
(Exact name of registrant as specified in its charter)
Pennsylvania |
|
23-2507402 |
(State or other jurisdiction of incorporation) |
|
(IRS Employer Identification No.) |
|
|
|
720 Pennsylvania Drive, Exton, Pennsylvania |
|
19341 |
(Address of principal executive offices) |
|
(Zip Code) |
(610) 646-9800
(Registrants telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of each class: |
|
Name of each exchange on which registered |
Common Stock par value $.001 per share |
|
The NASDAQ Stock Market, LLC |
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act Yes o No x
Note: Checking the box above will not relieve any registrant required to file reports pursuant to Section 13 or section 15(d) of the Exchange Act from their obligations under those sections.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of the registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of large accelerated filer, accelerated filer, non-accelerated filer, and smaller reporting company, in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer o |
|
Accelerated filer o |
|
|
|
Non-accelerated filer o |
|
Smaller Reporting Company x |
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x
The aggregate market value of the Registrants common stock held by non-affiliates of the Registrant as of March 31, 2016 (the last business day of the registrants most recently completed second quarter) was approximately $29.6 million. Shares of common stock held by each executive officer and director and by each person who owns 10% or more of the Registrants outstanding common stock have been excluded since such persons may be deemed affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
As of November 30, 2016, there were 16,716,014 outstanding shares of the Registrants Common Stock
Documents Incorporated by Reference
Portions of the Registrants Proxy Statement for the 2017 Annual Meeting of Shareholders to be filed prior to January 27, 2017 are incorporated by reference into Part III of this Report. Such Proxy Statement, except for the parts therein which have been specifically incorporated by reference, shall not be deemed filed for the purposes of this Report on Form 10-K.
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
2016 Annual Report on Form 10-K
FORWARD LOOKING STATEMENTS
This report contains forward looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended (the Exchange Act). These forward looking statements are based largely on current expectations and projections about future events and trends affecting the business, are not guarantees of future performance, and involve a number of risks, uncertainties and assumptions that are difficult to predict. In this report, the words anticipates, believes, may, will, estimates, continues, anticipates, intends, forecasts, expects, plans, could, should, would,is likely and similar expressions, as they relate to the business or to its management, are intended to identify forward looking statements, but they are not exclusive means of identifying them. Unless the context otherwise requires, all references herein to IS&S, the Registrant, the Company, we, us or our are to Innovative Solutions and Support, Inc. and its consolidated subsidiaries.
The forward looking statements in this report are only predictions, and actual events or results may differ materially. In evaluating such statements, a number of risks, uncertainties and other factors could cause actual results, performance, financial condition, cash flows, prospects and opportunities to differ materially from those expressed in, or implied by, the forward looking statements. These risks, uncertainties and other factors include those set forth in Item 1A (Risk Factors) of this Annual Report on Form 10-K and the following factors:
· market acceptance of the Companys flat panel display systems, or COCKPIT/IP® or other planned products or product enhancements;
· continued market acceptance of the Companys air data systems and products;
· the competitive environment and new product offerings from competitors;
· difficulties in developing and producing the Companys COCKPIT/IP® Flat Panel Display System or other planned products or product enhancements;
· the deferral or termination of programs or contracts for convenience by customers;
· the availability of government funding;
· the impact of general economic trends on the Companys business;
· the ability to gain regulatory approval of products in a timely manner;
· delays in receiving components from third party suppliers;
· the bankruptcy or insolvency of one or more key customers;
· protection of intellectual property rights;
· failure to retain/recruit key personnel;
· a cyber security incident;
· the ability to service the international market;
· risks related to our self-insurance program;
· potential future acquisitions; and
· other factors disclosed from time to time in the Companys filings with the United States Securities and Exchange Commission (the SEC).
Except as expressly required by the federal securities laws, the Company undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events, or otherwise after the date of this report. Results of operations in any past period should not be considered indicative of the results to be expected for future periods. Fluctuations in operating results may result in fluctuations in the price of the Companys common stock.
Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K. The Company does not undertake any obligation to publicly release any revisions to these forward-looking statements to reflect events, circumstances or changes in expectations after the date of this Annual Report on Form 10-K, or to reflect the occurrence of unanticipated events. The forward-looking statements in this document are intended to be subject to the safe harbor protection provided by Sections 27A of the Securities Act of 1933, as amended (the Securities Act), and 21E of the Exchange Act.
Investors should also be aware that while the Company, from time to time, communicates with securities analysts, it is against its policy to disclose any material non-public information or other confidential commercial information. Accordingly, shareholders should not assume that the Company agrees with any statement or report issued by any analyst irrespective of the content of the statement or report. Furthermore, the Company has a policy against issuing or confirming financial forecasts or projections issued by others. Thus, to the extent that reports issued by securities analysts contain any projections, forecasts or opinions, such reports are not the responsibility of Innovative Solutions and Support, Inc.
Overview
Innovative Solutions and Support, Inc. (the Company, or IS&S) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services air data equipment, engine display systems, standby equipment, primary flight guidance and cockpit display systems for retrofit applications and original equipment manufacturers (OEMs). The Company supplies integrated Flight Management Systems (FMS), Flat Panel Display Systems (FPDS), Integrated Standby Units (ISU) and advanced Global Positioning System (GPS) receivers that enable reduced carbon footprint navigation.
The Company has continued to position itself as a system integrator, which capability provides the Company with the potential to generate more substantive orders over a broader product base. The strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, United States Department of Defense (DoD)/governmental, and foreign military markets. This approach, combined with the Companys industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market, and to achieve cost advantages over products offered by its competitors.
For several years the Company has been working with advances in technology to provide pilots with more information to enhance both the safety and efficiency of flying, and has developed its COCKPIT/IP® Cockpit Information Portal (CIP) product line, that incorporates proprietary technology, low cost, reduced power consumption, decreased weight, and increased functionality. The Company believes the CIP product line is suited to address market demand that will be driven by regulatory mandates, new technologies, and the high cost of maintaining aging/obsolete equipment on airplanes that have been in service for up to fifty years. The Company has incorporated Electronic Flight Bag (EFB) functionality, such as charting and mapping systems, into its FPDS product line.
More recently, the Company has developed an FMS that combines the savings long associated with in flight fuel optimization in enroute flight management combined with the precision of satellite-based navigation required to comply with the regulatory environments of both domestic and international markets. The Company believes that the FMS coupled with its FPDS product line is well suited to address market demand driven by certain regulatory mandates, new technologies, and the high cost of maintaining aging and obsolete equipment on aircraft that will be in service for up to fifty years. The shift in the regulatory and technological environment is illustrated by the dramatic increase in the number of Space Based Augmentation System (SBAS) or Wide Area Augmentation System (WAAS) approach qualified airports, particularly as realized through Localizer Performance with Vertical guidance (LPV) navigation procedures. Aircraft equipped with the Companys FMS and FPDS product line (equipped with a SBAS/WAAS/LPV enabled navigator) will be qualified to land at such airports and to comply with upcoming Federal Aviation Administration (FAA) mandates for Required Navigation Performance (RNP), and Automatic Dependent Surveillance-Broadcast (ADS-B) navigation, a fact which IS&S believes will further increase the demand for the Companys products. The Companys FMS/FPDS product line is designed for new production and retrofit applications into general aviation, commercial air transport and military transport aircraft. In addition, the Company offers a state of the art ISU, integrating the full functionality of the primary and navigation displays into a small backup-powered unit. This ISU builds on the Companys legacy air data computer to form a complete next-generation cockpit display and navigation upgrade offering to the commercial and military markets.
IS&S sells to both the OEM and the retrofit markets. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, and foreign militaries. Occasionally, IS&S sells its products directly to DoD; however, the Company sells its products primarily to commercial customers for end use in DoD programs. Sales to defense contractors are generally made on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts.
Customers have been and may continue to be affected by the economic conditions in the United States and abroad. Such conditions may cause customers to curtail or delay their spending on both new and existing aircraft. Factors that can impact general economic conditions and the level of spending by customers include, but are not limited to, general levels of consumer spending, increases in fuel and energy costs, conditions in the real estate and mortgage markets, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors that affect spending behavior. Furthermore, spending by government agencies may be reduced in the future if tax revenues decline or as a result of legislation, such as the Budget Control Act of 2011. If customers curtail or delay their spending or are forced to declare bankruptcy or liquidate their operations because of adverse economic conditions, the Companys revenues and results of operations would be affected adversely. However, the Company believes that, in an uncertain
economic environment, customers that may have otherwise elected to purchase newly manufactured aircraft may be interested instead in retrofitting existing aircraft as a cost-effective alternative, thereby creating market opportunity for IS&S.
Industry
A wide range of information is critical for proper and safe operation of aircraft. With advances in technology, new types of information to assist pilots are becoming available for display in cockpits, such as satellite-based weather, ground terrain maps, and ADS-B navigation. The Company believes that aircraft cockpits will become more complete information centers, capable of delivering additional information that is either mandated by regulation or demanded by pilots to assist in the safe and efficient operation of aircraft.
The Company classifies flight data into four general types: aircraft heading and altitude information, flight critical aircraft control data, navigation data, and maintenance and aircraft health data. Aircraft heading and altitude information includes; aircraft speed, altitude, and rates of ascent and descent. Flight critical aircraft control information includes; engine data such as fuel and oil quantity, and other engine measurements. Navigation data includes; radio position, flight management, GPS, and alternative source information (i.e. information not originating on the aircraft, including weather depiction maps, GPS navigation, and surface terrain maps). Maintenance and aircraft health data includes on-board sensors and programs to measure parameters related to the health of a system on the aircraft. Air data calculations are based primarily on air pressure measurements derived from sensors on the aircraft. Engine data are determined by measuring various indices such as temperature, volume, revolutions per minute (RPM), and pressure within an aircrafts engines and other mechanical equipment. GPS and alternative source information are derived typically from satellites or equipment located on land and transmitted by satellite or radio signals to the aircraft. Maintenance and aircraft health data measure multiple parameters on various products and interface with various components to manage, measure, and report on the health, reliability and usability of a system. This information is displayed in the cockpit for reference, enhanced position awareness, and reduced support logistics on properly equipped aircraft.
Traditionally, flight data and other cockpit information were displayed on a series of separate analog mechanical instruments. In the early 1980s, Cathode Ray Tubes (CRT) and digital displays using Liquid Crystal Displays (LCD) began to replace some individual analog instruments. Presently, the industry offers high resolution color flat panels using Active Matrix Liquid Crystal Displays (AMLCD) to replace traditional analog instruments, CRT or LCD displays. IS&S expects that the ability to display more information in an efficient space and custom platform will become increasingly important if additional information, such as weather depiction maps, traffic information, surface terrain maps, datalink messaging, and surveillance displays, becomes mandated by regulation or demanded by pilots. Accordingly, the Company believes flat panel displays, which can integrate and display a suite of information, will replace individual instruments CRTs and LCDs on legacy aircraft.
In the past, equipment data, such as engine and fuel-related information, were displayed on conventional analog mechanical instruments. Engine and fuel instruments provide information on engine activity, including oil and hydraulic pressures, and temperature. These instruments are clustered throughout an aircrafts cockpit. Engine and fuel instruments tend to be replaced more frequently than other instruments due to obsolescence and normal wear-and-tear. Aircraft operators continue to purchase individual conventional engine and fuel instruments as replacements, because the information that these instruments display is vital for safe and efficient flight. Increasingly, operators are replacing their clusters of analog mechanical instruments with integrated Engine Instrument Display Systems (EIDS) or a FPDS packages.
As the skies and airports become more crowded, the aviation industry and its regulators are concentrating on new technologies, procedures, and regulations that allow more aircraft to operate in the skies and on the ground safely, efficiently, and with less impact on the environment. These new technologies and procedures, such as traffic avoidance, ground awareness, increased precision of navigation and vertical position, runway incursion prevention, and increased digital communication, will require innovation and intuitive methods to display situational awareness information for the pilots. The Company believes that flat panel displays provide the best solution to these requirements.
Strategy
The Companys objective is to become a leading supplier and integrator of cockpit information, and believes that its industry experience and reputation, technology and products, and business strategy provide the basis to achieve this objective. Key elements of the Companys strategy include:
· Focusing on retrofits. Cockpit avionics upgrades for existing aircraft is of great interest in the present environment. The retrofit of an aircraft with the COCKPIT/IP® FPDS, FMS, and ISU system components is cost effective compared to the acquisition of a new aircraft and can provide equivalent functionality to that of new aircraft.
· Establishing leadership in the flat panel display market. IS&S expects that many aircraft will be retrofitted with flat panel displays over the next several years. Given the versatility, visual appeal, and lower cost of displaying a series of instruments and other flight relevant information on a single flat panel, the Company believes that flat panel displays will increasingly replace individual analog and digital instruments, LCDs and CRTs. The Company believes that the COCKPIT/IP® has significant benefits over competitive flat panel displays, including lower cost, larger size, reduced weight, enhanced viewing angles, and a broader array of functions. The Companys patented and proprietary Integrity Checking Processor and Zooming features provide increased situational awareness, reliability, performance, and utility to the owner/operator. Accordingly, the Company believes that these advantages will allow IS&S to generate significant revenues from the COCKPIT/IP® product, and to increase market share. In addition, demand for new aircraft, FAA mandates and obsolescence issues on older aircraft will contribute to this growth.
· Continuing engineering and product development successes. IS&S develops innovative products by combining its avionics, engineering, and design expertise with commercially available technologies, components, and products from non-aviation applications, including the personal computer and telecommunications industries. The Companys COCKPIT/IP® system components present examples of its ability to engineer products through the selective application of non-avionic technology. In addition, as permitted by law, IS&S applies for and registers its patents and trademarks for the technology and products it develops in the United States and various countries around the world to protect its intellectual property. Research and development (R&D) expenses were $4.9 million, $2.7 million and $2.6 million for fiscal years ended September 30, 2016, 2015 and 2014, respectively. During fiscal 2016, 2015 and 2014 revenues related to Engineering Development Contracts (EDC) accounted for 4%, 27% and 32%, respectively, of total sales. In support of these EDC programs, the Company charged $0.4 million, $4.7 million, and $15.5 million for fiscal years ended September 30, 2015, 2014 and 2013, respectively to cost of sales.
· Maintaining leadership in air data markets. The Company believes that it is one of the largest suppliers of air data products to the U.S. retrofit market. The pressures on DoD procurement budget make the retrofit of aging military aircraft with newer, more advanced, and more supportable air data systems more attractive. In addition, higher performance engines in business aircraft are creating a need for more sophisticated air data products which the Company supplies.
· Increasing sales to DoD, other government agencies, defense contractors, commercial air transport and corporate/general aviation markets. IS&S has extended its efforts to diversify sales to include all aviation end user markets, especially legacy military programs and commercial air transport aircraft. In the commercial air transport market, the Company has addressed national carriers, regional carriers, and other fleet operators. The Company has targeted the corporate/general aviation market, both for retrofits and original equipment, and has ongoing retrofit programs and two OEM programs with Eclipse Aerospace, Inc. (Eclipse) and Pilatus Aircraft Limited (Pilatus).
· Expanding international presence. IS&S plans to increase its international sales by adding sales and marketing personnel. The Company believes that European and other international aircraft operators and aircraft modification centers will retrofit legacy in-service aircraft with large flat panel displays. IS&S obtained approval from the European Aviation Safety Agency (EASA) for installing the FPDS in Europe for the B757/B767 aircraft and expects to obtain EASA approvals for other European aircraft types.
Products
Current lines of products include:
Flat Panel Display Systems
Flat panel displays are AMLCD screens that can replicate the display of one or a suite of analog or digital displays on one screen. Flat panel displays can replace existing displays in legacy aircraft. AMLCDs are used also for security monitoring on-board aircraft and as tactical workstations on military aircraft. The flat panel product line offers numerous advantages for presentation of engine performance data. During fiscal years 2016, 2015 and 2014, revenues related to FPDS accounted for 95%, 98% and 88%, respectively, of total sales.
The Companys FPDS can replace conventional analog and digital displays and can display additional information which is not commonly displayed in the cockpit with conventional analog and digital displays. The COCKPIT/IP® is capable of displaying nearly all types of air data, engine and fuel data, altitude, heading and navigational data, maintenance and aircraft health data, and alternative source information. As technology and information delivery systems develop further, additional information will be displayed in the cockpit, such as surface terrain maps and data link messaging. IS&S designed the COCKPIT/IP® to be capable of displaying
information from a variety of sources, including its Reduced Vertical Separation Minimum (RVSM) air data system, engine and fuel instrumentation, and third-party data and information products.
From time to time, customers may order one or more FPDSs customized to their particular requirements. Typically, the Company charges for the added development cost. This revenue is reported as EDC on the consolidated statement of income. Engineering costs incurred in customizing the FPDSs are included in cost of sales.
Flight Management Systems
The IS&S NextGen Flight Management System is an easily installed navigation and performance computer that complements the IS&S Flat Panel Display System upgrade for commercial air transport aircraft. The FMS interfaces with the IS&S SBAS GPS Global Positioning System (GPS) to provide a GPS based navigation solution. The GPS receiver is located remotely depending on space availability. To minimize use of cockpit space and ease installation efforts, the FMS is housed in an ARINC 739B compliant Multifunction and Control Display Unit (MCDU).
Each FMS/MCDU has an LCD display, keyboard, mode and function keys, line select keys, annunciator lights, and supports ethernet data loading. The flight crew can manually or datalink waypoint flight plans, routes or user-defined waypoints on the IS&S FMS and modify and update these plans via the FMS/MCDU screen. Once the flight plan data is entered, the MCDU computes the most economical flight profiles and provides steering commands for use by the aircraft control system to fly the airplane along the desired route.
The FMS/MCDU package incorporates a robust navigation database capable of storing todays global database with ample growth for the future. Flight crews can utilize the data in the navigation database to create, edit and modify flight plans for display on the FPDS. The navigation data includes airways, jet routes, SIDS, STARS, and company stored routes.
The FMS/MCDU is ARINC 739B compliant, which provides an interface option for other cockpit equipment such as SATCOM, ACARS, CMU, HUD, and a printer. The interface to the IS&S FPDS is provided via Ethernet. The IS&S EFB is integrated with the FMS/MCDU and FPDS where the control selection of the EFB features and applications are handled via the FMS/MCDU. The display is a five inch LCD with VGA resolution. The touchscreen display uses LED backlighting and is sunlight readable.
Integrated Standby Unit
The Companys new ISU incorporates the measurement and display of attitude, altitude, airspeed, and navigation data into a single standby/backup navigation instrument for military, commercial air transport and corporate/general aviation applications. The ISU has an optional battery module that allows operation of the unit under emergency conditions. The ISU has an integral Inertial Measurement Unit that includes accelerometer, gyro, and magnetometer triads. The unit also includes an integral air data measurement module for measurement of static and total pressure for display of altitude, airspeed, and mach number.
The ISU is a highly reliable and accurate standby navigation system that is based on IS&Ss merger of COCKPIT/IP® display technology and RVSM air data products coupled with the latest breakthroughs in MEMS Gyros with exceptional stability. An IS&S proprietary algorithm provides for accurate computation of attitude, heading and air data parameters. The unit includes a triaxial magnetometer that is designed to be tolerant to the local soft iron effects.
The display uses a familiar Primary Flight Display format to reduce pilot workload. Logistics and maintenance savings are realized due to increased reliability and a reduction in LRUs. The unit is equipped with built-in test and display of navigational aid and maintenance data.
Air Data Systems and Components
The Companys air data products calculate and display various measures such as aircraft speed, altitude, and rate of ascent and descent. These air data products utilize advanced sensors to gather air pressure data and customized algorithms to interpret data, thus allowing the system to calculate altitude more accurately. During fiscal 2016, 2015, and 2014, sales of air data systems and components accounted for 5%, 2%, and 12%, respectively, of total revenues.
IS&S sells individual components and partial and complete air data systems. The components and systems include:
· digital air data computers, which calculate various air data parameters such as altitude, airspeed, vertical speed, angle of attack and other information derived from the measure of air pressure;
· integrated air data computers and display units, which calculate and convey air data information;
· altitude displays, which convey aircraft altitude measurements;
· airspeed displays, which convey various airspeed measurements including vertical airspeed and rates of ascent and descent; and
· altitude alerters which allow pilots to select a desired cruising altitude and which provide warnings to pilots when an unacceptable deviation occurs.
Engine and Fuel Displays
IS&S develops, manufactures and markets engine and fuel displays. These solid-state multifunction displays convey information with respect to fuel and oil levels, and engine activity, such as oil and hydraulic pressure and temperature. They include individual and multiple displays installed throughout the cockpit. The displays can be used in conjunction with the Companys engine and fuel data equipment or that of other manufacturers.
Engine and fuel displays are vital to safe flight. In addition, accurate conveyance of engine and fuel information is critical for monitoring engine stress and parts maintenance. Engine and fuel displays tend to be replaced more frequently than other displays, and have been slow to incorporate new technology since their introduction because of their low cost, standard design and universal use.
IS&S believes that its air data engine and fuel displays are extremely reliable, have been designed to be programmable, and are adaptable easily without major modification to most modern aircraft. These products have been installed on B727, B737, C-130H, DC-9, DC-10, P-3, F-16, and A-10 aircraft.
Integrated Global Navigation System
The Companys Integrated Global Navigation System (IGNS) product is an alternative for adding GPS navigation capability to legacy aircraft through the OEM FMS without the high cost of upgrading the current FMS.
This product includes RNP and RNAV approaches via the certified IS&S Beta 3 GPS and leverages components of the Companys Flat Panel Display System to provide annunciation to the pilot during GPS procedures.
Customers
The Companys customers include the United States government (including DoD, the Department of Interior (DOI) and the Department of Homeland Security (DHS), American Airlines, Inc. (AAI), Boeing, Deutsche Post DHL Group (DHL) , Eclipse, FedEx Corporation (FedEx), Icelandair, L-3 Communications, Lockheed Martin Corporation, Pilatus, Sierra Nevada Corporation (Sierra Nevada), and the Department of National Defense (Canada), among others. In fiscal year 2016, the three largest customers, Sierra Nevada, Jet2.com and DHL accounted for 13%, 12% and 11% of total revenue, respectively. In fiscal year 2015, the two largest customers, Pilatus and Eclipse accounted for 20% and 15% of total revenue, respectively. In fiscal 2014, the three largest customers, Pilatus, Eclipse Aerospace and FedEx, accounted for 17%, 14%, and 12% of total revenue, respectively.
Retrofit Market
Historically, a majority of the Companys sales have come from the retrofit market, which IS&S has pursued because of its continued growth in response to the need to support the worlds aging fleet of aircraft. The design and airframe structure of many types of older aircraft generally exceeds the technology and technical capabilities of the original cockpit instruments and avionics. The Company has developed products that enable owners and operators to upgrade their aircraft by retrofitting them with IS&S products at a competitive cost and with equipment that provides cockpit displays with capabilities and technology equivalent to new aircraft.
IS&S expects its main customers in the retrofit market will continue to be:
· the DoD and defense contractors,
· aircraft operators, and
· aircraft modification centers.
Department of Defense and Defense Contractors. The Company sells its products directly to the DoD and to domestic and international defense contractors for end use on military aircraft retrofit programs. DoD programs generally take one of two forms: a subcontract with a prime government contractor, such as Boeing, Lockheed Martin, or L-3 Communications, or a direct contract with the appropriate government agency, such as the U.S. Air Force. The governments desire for cost-effective retrofit of its aircraft has led it to purchase commercial off-the-shelf equipment rather than to develop specially designed products, which are usually more costly and take longer to implement. These retrofit contracts tend to be on arms-length commercial terms, although some termination and other provisions of government contracts are typically applicable to these contracts, as described under Government Regulation below. Each government agency or general contractor retains the right to terminate a contract at any time at its convenience. Upon such alteration or termination, IS&S is entitled typically to be compensated for already delivered items and reimbursement for allowable costs incurred.
Aircraft Operators. The Company sells its products to aircraft operators, including commercial airlines, cargo carriers, and business and general aviation aircraft owners or suppliers, primarily for retrofitting of aircraft owned or operated by these customers. The Companys commercial fleet customers include or have included, among others, AAI, ABX Air, FedEx and Icelandair. IS&S sells these customers a range of products from FPDS to air data systems.
Aircraft Modification Centers. Aircraft modification centers, which repair and retrofit private aircraft, represent the primary retrofit market for private and corporate jets. IS&S has established relationships with a number of aircraft modification centers throughout the United States, which act as distribution outlets for the Companys products.
OEM Market
Since 2009, IS&S has been providing, through Eclipse, enhanced capability through retrofits to numerous owners of aircraft produced by Eclipse Aviation Inc., the assets of which were acquired by Eclipse in 2009. On April 15, 2015, Eclipse merged with Kestrel Aircraft to form One Aviation. IS&S is also developing and manufacturing the Utilities Management System (UMS) for Pilatus PC-24 aircraft under a multi-year production contract. The UMS integrates multiple aircraft utility functions commonly supported by multiple individual controllers and monitors. The UMS will provide integrated control of systems from within the avionics suite and automate various normal and emergency tasks to reduce crew workload and improve safety conditions. This open architecture system will allow Pilatus to design and/or refine control and monitoring algorithms internally.
IS&S also markets its products to other original equipment manufacturers including Boeing and Lockheed Martin.
Backlog
|
|
September 30 |
| ||||
$000s |
|
2016 |
|
2015 |
| ||
|
|
|
|
|
| ||
Backlog, beginning of period |
|
$ |
7,601 |
|
$ |
8,417 |
|
Plus: bookings during period, net |
|
24,938 |
|
19,251 |
| ||
Less: revenue recognized during period |
|
(27,970 |
) |
(20,067 |
) | ||
Backlog, end of period |
|
$ |
4,569 |
|
$ |
7,601 |
|
Backlog represents the value of contracts and purchase orders, less the revenue recognized to date on those contracts and purchase orders. The year over year decrease of $3.0 million was the result of booking of $24.9 million in new business, offset by $28.0 million in recognized revenue. Air data product backlog as of September 30, 2016 remained constant from September 30, 2015, and FPDS backlog as of September 30, 2016 decreased by $3.0 million from September 30, 2015, reflecting increased FPDS sales during 2016. The backlog excludes potential future sole-source production orders from products currently in development under the Companys EDC programs, including the Eclipse E550, the Pilatus PC-24, and the KC-46A, all of which the Company expects to enter into extended production phases upon completion of development. Although the Company believes that the orders included in backlog are firm, most of the backlog involves orders that can be modified or terminated by the customer. As of September 30, 2016, none of the Companys backlog was expected to be filled beyond fiscal 2017.
Engineering Development
The Company invests a large percentage of its sales on engineering development, both R&D and EDC. At September 30, 2016, approximately 35% of the Companys employees were engineers engaged in various engineering development projects. Total engineering development expense is comprised of both internally funded R&D and product development and design charges related to
specific customer contracts. Engineering development expense consists primarily of payroll-related expenses of employees engaged in EDC projects, engineering related product materials and equipment, and subcontracting costs. R&D charges incurred for product design, product enhancements, and future product development are expensed as incurred. Product development and design charges related to specific customer contracts are charged to cost of sales-EDC based on the method of contract accounting (either percentage-of-completion or completed contract) applicable to such contracts.
Sales and Marketing
IS&S focuses its sales efforts on passenger and cargo carrying aircraft operators, general aviation operators, aircraft modification centers, the DoD, DoD contractors, and OEMs. Periodically, the Company evaluates its sales and marketing efforts with respect to these focus areas and, where appropriate, makes use of third-party sales representatives who receive compensation through commissions based on performance.
The Companys ability to provide prompt and effective repair and upgrade service is critical to its marketing efforts. The Companys customer service program offers a 24-hour customer hotline. The Company services its customers utilizing either field service engineers or its in-house repair and upgrade facility. The Company may lend spare units to customers when it is repairing or overhauling their equipment. IS&S provides customers with a standard two-year warranty on new products. The Company offers customers extended warranties of varying lengths beyond the two years for additional fees.
The majority of the Companys sales, personnel and assets are within the United States. In fiscal year 2016, 2015 and 2014 net sales outside the United States amounted to $8.2 million, $6.6 million and $12.0 million, respectively.
Government Regulation
FAA regulations govern the manufacture and installation of the Companys products in aircraft owned and operated in the United States, and the IS&S facility is FAA certified. The most significant product and installation regulations are Technical Standard Orders (TSOs) and Supplemental Type Certificate (STCs), which establish the minimum product performance standards. For example, in March 2015 and July 2015, respectively, the FAA issued its TSO authorization (TSO) and STC for the Companys B757 Integrated Standby Unit to be used on B757 aircraft in the United States, and in December 2014, the FAA issued a TSO and STC to IS&S for a high definition Integrated Flat Panel Display System for use on Pilatus PC-12 type aircraft in the United States.
Generally, sales of IS&S products to European or other non-U.S. owners of aircraft require approval of European Aviation Safety Agency (EASA), or other relevant governmental agencies. EASA certification requirements for the manufacture and installation of the Companys products in European owned aircraft mirror FAA regulations, and its process for European certification is similar to that of the FAA. For example, in August 2015, the EASA issued an STC on the Companys B757 Integrated Standby Unit to be used on B757 aircraft in the European Community.
In addition to product related regulations, IS&S is subject to U.S. Government procurement regulations with respect to the sale of the Companys products to government entities or government contractors. The government agency or general contractor retains the right to terminate a contract at any time at its convenience. Upon such alteration or termination, IS&S is generally entitled to an equitable adjustment to the contract price so that the Company receives the purchase price for products or services already delivered and reimbursement for allowable costs incurred and for termination related costs.
Manufacturing, Assembly and Materials Acquisition
The Companys manufacturing activities consist primarily of assembling and testing components and subassemblies, and integrating them into finished systems. Typically, the Company purchases components for products from third-party suppliers and assembles them in a clean room environment. Many of the components purchased are standard products, although certain parts are made to the Companys specifications.
When appropriate, IS&S enters into long-term supply agreements and uses its relationships with long-term suppliers to improve product quality and availability, and to reduce delivery times and product costs. In addition, the Company identifies alternative suppliers for important component parts. Generally, the introduction of component parts from new suppliers into existing products requires FAA certification of the entire finished product if the newly sourced component varies significantly from the original drawings and specifications. IS&S has not experienced significant delays in delivery of products caused by the inability to obtain either component parts or FAA approval of products incorporating new component parts.
Quality Assurance
Product quality is of vital importance. The Company is ISO 9001 and AS9100C certified. These standards represent an international consensus on effective management practices with the goal of ensuring that a company can deliver its products and related services consistently in a manner that meets or exceeds customer quality requirements. IS&Ss certification to these standards allows the Company to represent to customers that it maintains high quality industry standards in the education of its employees, and in the design and manufacture of its products. In addition, the Companys products undergo extensive and documented quality control testing prior to being delivered to customers.
Competition
The market for the Companys products is highly competitive. Competitors vary in size and resources, and substantially all of the Companys competitors are much larger than IS&S and have substantially greater resources. With respect to air data systems and related products, the Companys principal competitors include Honeywell International Inc. (Honeywell), Rockwell Collins, Inc., Thales Communications, Inc. (Thales), and Garmin Ltd. (Garmin). With respect to flat panel displays, principal competitors currently include Honeywell, Rockwell Collins, Inc., L-3 Communications, Garmin and GE Aviation Systems (GEAS). However, as the flat panel display industry evolves and the demand for flat panel displays increases, IS&S may face future competition in this area from other suppliers.
The Company believes that the principal competitive factors in its markets are cost, development cycle time, responsiveness to customer preferences, product quality, technology, and reliability. IS&S believes that its significant and long-standing customer relationships reflect the Companys ability to compete favorably with respect to these factors.
Intellectual Property and Proprietary Rights
IS&S relies on patents to protect its proprietary technology. As of September 30, 2016, the Company holds 32 U.S. patents and has 9 U.S. patent applications pending relating to its technology. In addition, IS&S holds 64 international patents and has 18 international patent applications pending. Certain of these patents and patent applications cover technology relating to air data measurement systems and others cover technology relating to flat panel display systems and other aspects of the COCKPIT/IP® solution. While IS&S believes these patents have significant value in protecting its technology, it believes that the innovative skill, technical expertise, and know-how of the Companys personnel in applying the technology reflected in its patents would be difficult, costly, and time consuming to reproduce.
While IS&S is not aware of any pending lawsuits against the Company alleging patent infringement or the violation of other intellectual property rights, it cannot be certain such infringement claims will not be asserted against the Company in the future.
Employees
As of September 30, 2016, IS&S had 91 employees. The Companys future success depends on its ability to attract, train and retain highly qualified personnel. Competition for such qualified personnel is intense, and the Company may not be able to attract, train, and retain highly qualified personnel in the future. None of the Companys employees are currently represented by a labor union.
Executive Officers of the Registrant
The following is a list of the Companys executive officers, their ages and their positions in each case.
Name |
|
Age |
|
Position |
Geoffrey S. M. Hedrick |
|
74 |
|
Chairman of the Board and Chief Executive Officer |
Shahram Askarpour |
|
59 |
|
President |
Relland M. Winand |
|
62 |
|
Chief Financial Officer |
Geoffrey S. M. Hedrick was the Chief Executive Officer from the time he founded the Company in February 1988 through June 4, 2007, and was reappointed as Chief Executive Officer on September 8, 2008. He has been Chairman of the Board since 1997. Prior to founding IS&S, Mr. Hedrick served as President and Chief Executive Officer of Smiths Industries North American Aerospace Companies. He founded Harowe Systems, Inc. in 1971, which was subsequently acquired by Smiths Industries. Mr. Hedrick has over 40 years of experience in the avionics industry, and he holds a number of patents in the electronics, optoelectric, electromagnetic, aerospace, and contamination control fields.
Shahram Askarpour has been President since April 2012. Dr. Askarpour joined the Company as a Director of Engineering in 2003, was promoted to Vice President of Engineering in 2005, and was promoted to President on April 2, 2012. Dr. Askarpour has more than 30 years of aerospace industry experience in managerial and technical positions. Prior to joining IS&S, he was employed by Smiths Aerospace (a division of Smiths Group PLC), Instrumentation Technology and Marconi Avionics. He holds a number of key patents in the aviation field. Dr. Askarpour received his engineering education in the United Kingdom, and received an undergraduate degree in Electrical Engineering from Middlesex University, a post graduate Certificate of Advanced Study in Systems Engineering, and a PhD in Automatic Control from Brunel University. He was awarded the title of Associate Research Fellow for three consecutive years by Brunel University, and has published numerous papers in leading international, peer reviewed journals. In addition, he has completed management courses at Carnegie Mellon University and finance courses at the Wharton Business School.
Relland M. Winand has been the Companys Chief Financial Officer since December 15, 2014. Mr. Winand has served in a number of executive financial capacities with public companies including Chief Financial Officer of ECC International, Corp, a manufacturer of computer controlled maintenance simulators primarily for the Department of Defense, and Vice President Finance and Administration of Traffic.com, Inc. a leading provider of accurate, real-time traffic information in the United States. Prior to joining Innovative Solutions and Support, Inc., from 2008 to 2013, Mr. Winand was Chief Financial Officer of Orbit/FR, Inc., an international developer and manufacturer of sophisticated microwave test and measurement systems for aerospace/defense, wireless, satellite and automotive industries. From January 2014 until August 2014, Mr. Winand served as a consultant for Solomon Edwards Group LLC. He has over 30 years experience in financial management and reporting for both public domestic and international manufacturing companies. Mr. Winand received a B.S. in Accounting from Drexel University and an M.B.A. in Finance from Widener University.
Other
The public may read and copy any materials filed by IS&S with the SEC at the SECs public reference room located at 100 F Street, N.E., Washington, D.C. 20549. The public may obtain information about the operation of the SECs public reference rooms by
calling the SEC at 1-800-SEC-0330. The SEC also maintains a website at http://www.sec.gov that contains reports, proxy and information statements, and other information about issuers that file electronically with the SEC.
IS&S maintains its corporate website at http://www.innovative-ss.com and makes available, free of charge, on that website (under the Investor Relations tab) the Companys annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those as reasonably practicable after it electronically files such material with, or furnishes it to, the SEC. The information on the Companys web site is not incorporated as part of this Annual Report on Form 10-K.
Each reader should carefully consider the risks, uncertainties and other factors described below, in addition to the other information set forth in this report, because they could materially and adversely affect the Companys business, operating results, financial condition, cash flows, prospects, and the value of an investment in IS&S common stock.
Risks Related to IS&S Business
Growth of the Companys customer base could be limited by delays or difficulties in completing development and introduction of planned products or product enhancements. If IS&S fails to enhance existing products, or to develop and achieve market acceptance for flat panel displays, flight management systems and other new products that meet customer requirements, its business, reputation and statements of income may be affected adversely.
Currently, IS&S spends a large portion of its R&D efforts in developing and marketing the FPDS, FMS, and complementary products. The Companys ability to grow and diversify its operations through introduction and sale of new products is dependent upon the continued success in product development and engineering activities, its sales and marketing efforts, and regulatory approvals to sell such products. Sales growth will depend in part on market acceptance of and demand for the FPDS, FMS, and future products. IS&S cannot be certain that it will be able to develop, introduce or market its FPDS, FMS, or other new products or product enhancements in a timely or cost-effective manner, or that any new products will receive market acceptance or necessary regulatory approval. In addition, the Companys business is dependent upon maintaining its reputation and relationships with existing customers. If the Companys performance does not meet its customers expectations, the Companys reputation and its relationships could be damaged, which may have a material adverse impact on the Companys business and statements of income.
In seeking new customers, the Company may have difficulty in displacing the products of incumbent competitors. IS&S cannot be assured that potential customers will accept its products or that existing customers will not abandon them.
The Companys revenue and operating results may vary significantly from quarter to quarter, which may cause its stock price to decline.
The Companys revenue and operating results may vary significantly from quarter to quarter because of a number of factors, including:
· demand for products and/or delivery schedule changes by its customers;
· capital expenditure budgets of aircraft owners and operators, and appropriation cycles of the U.S. government;
· changes in the use of the Companys products, including air data systems, flat panel displays, and flight management systems;
· delays in introducing or obtaining government approval for new products;
· new product introductions by competitors;
· changes in IS&S pricing policies or pricing policies of competitors; and
· costs related to possible acquisition of technologies or businesses.
The loss of a key customer or a significant deterioration in the financial condition of a key customer could have a material adverse effect on the Companys results of operations.
The Companys revenue is concentrated with a limited number of customers. During fiscal year 2016 IS&S derived 51% of revenue from the top five customers. IS&S expects a relatively small number of customers to account for a majority of its revenues for the foreseeable future. As a result of the concentrated customer base, a loss of one or more of these customers or a dispute or litigation with one of these key customers could affect adversely its revenue and results of operations. For example, in October 2014, Delta issued a cancellation notice to the Company purporting to terminate its contract with IS&S (See Item 3. Legal Proceedings). In addition, the Company monitors and evaluates the credit status of its customers and attempts to adjust sales terms as appropriate. Despite these efforts, a significant deterioration in the financial condition or bankruptcy filing of a key customer could affect adversely the Companys business, results of operations, and financial condition.
Contracts can be terminated by customers at any time and, therefore, may not result in sales.
The Companys retrofit projects are generally pursuant to either a direct contract with a customer or a subcontract with a general contractor to a customer (including government agencies). Each contract, including contracts with government agencies, includes various terms and conditions that impose certain requirements on IS&S, including the ability of the government agency or general contractor to alter the price, quantity or delivery schedule of the products. Additionally, each government agency or general contractor retains the right to terminate the contract at any time at its convenience. Upon alteration or termination of these contracts, IS&S is entitled typically to an equitable adjustment to the contract price so that it would be compensated for delivered items and allowable costs incurred. Accordingly, because these contracts can be terminated, the Company cannot be assured that its backlog will result in sales. For example, in October 2014, Delta issued a cancellation notice to the Company purporting to terminate its contract with IS&S resulting in $61.9 million of debookings with respect thereto.
The Company enters into fixed-price contracts or service arrangements to perform specified design and EDC services related to its products that could subject IS&S to losses in the event the Company incurs cost overruns on its projects.
During fiscal 2016, approximately 4% percent of the Companys total sales were from fixed-price EDC arrangements with customers to perform specified design and EDC services related to its products. These arrangements allow IS&S to benefit by recovering some of its product development costs, but it carries the risk of potential cost overruns. If the Companys initial cost estimates are incorrect, it can incur potentially large one time charges and losses on these contracts. These EDC arrangements can expose the Company to potential losses because the customer may compel IS&S to complete a project or, in the event of a termination for default, pay the incremental cost of its replacement by another provider. Because some of these projects involve new technologies and applications, and can last for more than a year, unforeseen events such as technological difficulties, fluctuations in the price of raw materials, problems with subcontractors, and cost overruns can result in the contractual price becoming less favorable or even unprofitable to IS&S over time. Furthermore, if the Company does not meet project deadlines or if its products do not meet customer specifications, it may need to renegotiate contracts on less favorable terms, be forced to pay penalties or liquidated damages, or suffer losses if the customer exercises its right to terminate. The Companys results of operations are dependent on its ability to maximize earnings from the EDC service arrangements. Lower earnings caused by cost overruns could have a negative impact on the Companys financial condition, operating results, and cash flows.
Reductions in government expenditures could adversely affect IS&S business.
Reductions in funding of the DoD and U.S. defense spending, such as those imposed by the Budget Act of 2011, could have significant consequences to the Companys business and industry. While the full impact of such reductions is not determinable, the impact of any resulting reductions in defense appropriations, and/or reductions in U.S. defense spending could result in delays in procurement of products and services due to lack of funding, and negatively affect the IS&Ss revenues, financial condition and results of operations.
Volatility and weakness in capital markets may adversely affect credit availability and related financing costs, which could adversely affect IS&S.
Bank and capital markets can experience periods of volatility and disruption. During these periods of volatility and disruption, risks to IS&S include:
· declines in revenues and profitability from reduced orders, payment delays or other factors caused by the economic
· problems of customers;
· reprioritization of government spending away from defense programs in which IS&S participates;
· reduced access to credit sources; and
· disruptions in supplies associated with any financial constraints faced by vendors.
A portion of IS&S sales come from government contracts, which could be adversely affected by continued high U.S. federal budget deficits.
A portion of IS&S sales has been, and is expected to continue to be, from defense contractors or government agencies in connection with government aircraft retrofit or original equipment manufacturing contracts. Sales to government contractors and government agencies could decline as a result of DoD spending cuts and general budgetary constraints which may become more severe as the federal budget deficit remains high.
We self-insure a significant portion of our employee medical insurance program, which may expose us to unpredictable costs and negatively affect our financial performance.
We self-insure a significant portion of our employee medical insurance program and related benefit claims. The estimated liability for the self-funded portion of our insurance program is determined actuarially, based on claims filed historically, demographic factors and an estimate of claims incurred but not yet reported. We maintain stop loss insurance coverage to limit our exposure for the self-funded portion of our health insurance program both on a per employee and aggregate basis, and liabilities associated with these losses include estimates of both claims filed and losses incurred but not yet reported. Unanticipated changes in any applicable actuarial assumptions or management estimates underlying our recorded liabilities for these losses could result in materially different amounts of expense than expected under these programs, which could have a material adverse effect on our financial condition and results of operations. In addition, the premiums for this coverage could increase in the future, or we could be forced to raise our self-insured retention amounts. If these expenses increase, or if we experience a claim in excess of our reserve and/or coverage limits, it could also have a material adverse effect on our financial condition and results of operation.
IS&S depends on key personnel to manage its business effectively, and an inability to retain its key employees could adversely impact the Companys ability to compete.
The Companys success depends on the efforts, abilities, and expertise of its senior management and other key personnel. There can be no assurance IS&S will be able to retain such employees, and the loss of some could damage its ability to execute its business strategy. The Company intends to continue hiring key management, engineering, and sales and marketing personnel. Competition for skilled personnel is intense, and IS&S may not be able to attract or retain additional qualified personnel.
The Companys future success will depend in part on its ability to implement and improve its operational, administrative and financial systems and controls and to manage, train and expand its employee base. IS&S cannot provide assurance that, after giving effect to its cost containment initiatives, that current and planned personnel levels, systems, procedures, and controls will be adequate to support the current and future customer base. In such a circumstance, the Company may not be able to exploit existing and potential market opportunities. Any delays or difficulties encountered could impair the Companys ability to attract new customers or maintain its relationships with existing customers.
IS&S relies on third party suppliers for components of its products, and any interruption in the supply of these components could hinder its ability to deliver products on a timely basis.
The Companys manufacturing process consists primarily of assembling components purchased from its supply chain. The suppliers may not continue to be available to IS&S. If the Company is unable to maintain relationships with key third party suppliers, the development and distribution of its products could be delayed until equivalent components can be obtained and integrated into the products. In addition, substitution of certain components from other manufacturers may require product redesign, FAA or other approval, which could delay the Companys ability to ship products.
If the Company fails to maintain an effective system of internal control over financial reporting, it may not be able to accurately report its financial condition, results of operations or cash flows, which may adversely affect investor confidence in the Company and, as a result, the value of the Companys common stock.
The Sarbanes-Oxley Act of 2002, as amended (the Sarbanes-Oxley Act) requires, among other things, that the Company maintain effective internal controls for financial reporting and disclosure controls and procedures. Under Section 404 of the Sarbanes-Oxley Act, the Company is required to furnish a report by management on, among other things, the effectiveness of the Companys internal control over financial reporting. This assessment must include disclosure of any material weaknesses identified by management in the Companys internal control over financial reporting. A material weakness is a control deficiency, or combination of control deficiencies, in internal control over financial reporting that results in more than a reasonable possibility that a material misstatement
of annual or interim financial statements will not be prevented or detected on a timely basis. Section 404 of the Sarbanes-Oxley Act also generally requires an attestation from the Companys independent registered public accounting firm on the effectiveness of the Companys internal control over financial reporting.
The Companys compliance with Section 404 requires that it compile the system and process documentation necessary to perform an appropriate evaluation. During the evaluation and testing process, if the Company identifies one or more material weaknesses in its internal control over financial reporting, it will be unable to assert that its internal control over financial reporting is effective. The Company cannot assure you that there will not be material weaknesses or significant deficiencies in its internal control over financial reporting in the future. Any failure to maintain internal control over financial reporting could severely inhibit the Companys ability to accurately report its financial condition, results of operations or cash flows. If the Company is unable to conclude that its internal control over financial reporting is effective, or if its independent registered public accounting firm determines the Company has a material weakness or significant deficiency in its internal control over financial reporting once that firm begin its reviews, the Company could lose investor confidence in the accuracy and completeness of its financial reports, the market price of its common stock could decline, and it could be subject to sanctions or investigations by NASDAQ, the Securities and Exchange Commission or other regulatory authorities. Failure to remedy any material weakness in the Companys internal control over financial reporting, or to implement or maintain other effective control systems required of public companies, could also restrict the Companys future access to the capital markets.
We currently operate without a substantial backlog.
During periods of economic uncertainty, the rate of customer orders can quickly decrease, and a substantial backlog may help promote greater efficiency in production, facilitate business planning and improve revenue visibility. As of September 30, 2016, none of the Companys backlog was expected to be filled beyond fiscal 2017, which is below the Companys historical expectations. As a result, future revenue will be dependent on orders booked and shipped in that quarter, and may not be predictable with any degree of certainty. Furthermore, certain contracts may represent a significant portion of our revenue and profits for a quarter such that the loss or deferral of even one such contract could adversely affect our revenue and profitability.
Litigation with customers, employees and others could harm our reputation and impact operating results.
In the ordinary course of business, we may be involved in lawsuits and regulatory actions with customers, employees and others. For example, in October 2014, Delta issued a cancellation notice to the Company purporting to terminate its contract with IS&S (See Item 3. Legal Proceedings). Additionally, we may be subject to employment-related claims alleging discrimination, harassment, wrongful termination and wage issues, including those relating to overtime compensation. We are susceptible to claims filed by customers alleging responsibility for breaches of contract or from product defects, and we are also subject to lawsuits filed by patent holders alleging patent infringement. These types of claims, as well as other types of lawsuits to which we are subject from time to time, can distract managements attention from core business operations and impact operating results, particularly if a lawsuit results in an unfavorable outcome, or could harm the Companys reputation with customers, employees, investors and others.
The Companys competition includes other manufacturers of air data systems and flight information displays against whom it may not be able to compete successfully.
The markets for the Companys products are intensely competitive and subject to rapid technological change. Competitors include Honeywell, Rockwell Collins, Inc., Thales, Garmin, GEAS, and L-3 Communications. All these competitors have substantially greater financial, technical, and human resources than does IS&S. In addition, these competitors have much greater experience in and resources for marketing their products. As a result, these competitors may be able to respond more quickly to new or emerging technologies and customer preferences, or to devote greater resources to development, promotion and sale of their products than IS&S can. The Companys competitors may have greater name recognition and more extensive customer bases. Such competition could result in price reductions, fewer customer orders, reduced gross margins, and loss of market share.
The Companys success depends on its ability to protect its proprietary rights against potential risk of infringement. If IS&S is unable to protect and enforce its intellectual property rights, it may be unable to compete effectively.
The Companys success and ability to compete will depend in part on its ability to obtain and maintain patent or other protection for its technology and products, both in the United States and internationally. In addition, IS&S must operate without infringing the proprietary rights of others.
As of September 30, 2016, IS&S held 32 U.S. patents and has 9 U.S. patent applications pending. In addition, the Company holds 64 international patents and has 18 international patent applications pending. IS&S cannot be certain that patents will be issued on any of its present or future applications. In addition, existing patents or future patents may not adequately protect the Companys technology if they are not broad enough and are successfully challenged, or if other entities are able to develop competing methods without violating its patents. If IS&S is not successful in protecting its intellectual property, competitors could begin to offer products that incorporate the Companys technology. Patent protection involves complex legal and factual questions, and, therefore, is highly uncertain. Litigation relating to intellectual property is often very time consuming and expensive. If a successful claim of patent infringement were made against IS&S, and if the Company were unable to develop non-infringing technology, or to license the infringed or similar technology on a timely and cost-effective basis, the Company might not be able to produce and sell some of its products. Further, IS&S has incurred, and may continue to incur, significant legal and other costs in defense of its intellectual property.
A cyber security incident or other technology disruption could have a negative impact on our business.
We face certain security threats and technology disruptions, including threats to our information technology (IT) infrastructure, attempts to gain access to our or our customers proprietary or classified information, threats of terrorism events, and failures of our technology tools and systems. Our IT networks and related systems are critical to the operation of our business and essential to our ability to successfully perform day-to-day operations. We are also involved with information technology systems for certain customers and other third parties, for which we face similar security threats as for our own, in particular the DoD. In particular, cybersecurity threats-which include, but are not limited to, computer viruses, spyware and malware, attempts to access information, denial of service attacks and other electronic security breaches-are persistent and evolve quickly. In general, such threats have increased in frequency, scope and potential impact in recent years. Further, a variety of technological tools and systems, including both company-owned IT and technological services provided by outside parties, support our critical functions. These technologies, as well as our products, are subject to failure and the users inability to have such technologies properly supported, updated, expanded or integrated into other technologies and, in certain cases, may contain open source and third party software which may unbeknownst to us contain defects or viruses that pose unintended risks. These risks, if not effectively mitigated or controlled, could materially harm our business or reputation. While we believe that we have implemented appropriate measures and controls, there can be no assurance that such actions will be sufficient to prevent disruptions to critical systems, unauthorized release of confidential information or corruption of data.
The security measures we have implemented are subject to third-party security breaches, employee error, malfeasance, faulty password management or other irregularities. For example, third parties may attempt to fraudulently induce employees or customers into disclosing user names, passwords or other sensitive information, which may in turn be used to access our IT systems. These security systems cannot provide absolute security. To the extent we were to experience a breach of our systems and were unable to protect sensitive data, such a breach could materially damage business partner and customer relationships, and curtail or otherwise impact the use of our information technology systems. Moreover, if a security breach of our information technology system affects our computer systems or results in the release of personally identifiable or other sensitive information of customers, business partners, employees and other third parties, our reputation and brand could be materially damaged, use of our products and services could decrease, and we could be exposed to a risk of loss, litigation and potential liability.
Such an event could require significant management attention and resources, negatively impact our reputation among our customers and the public and challenge our eligibility for future work on sensitive or classified systems, which could have a material adverse effect on our business, financial condition and results of operations.
Tax changes could affect the Companys effective tax rate and future profitability.
The Companys future results could be affected negatively by changes in the effective tax rate as a result of changes in the overall profitability and changes to statutory tax rates in the United States, changes in tax legislation, and the results of audits and examinations of previously filed tax returns.
The economic effects of Brexit may affect relationships with existing and future customers and could have an adverse impact on our business and operating results.
On June 23, 2016, the United Kingdom (the U.K.) held a referendum in which voters approved an exit from the European Union (E.U.), commonly referred to as Brexit. The referendum is non-binding; however, it is expected to be passed into law, after which negotiations will commence to determine the future terms of the U.K.s relationship with the E.U. The impact on the Companys business as a result of Brexit will depend, in part, on the outcome of tariff, trade, regulatory and other negotiations.
As a result of the referendum, the global markets and currencies have been adversely impacted, including a sharp decline in the value of the British pound as compared to the U.S. dollar. A potential devaluation of the local currencies of our international customers relative to the U.S. dollar may impair the purchasing power of our international customers and could cause international customers to decrease their volume of orders or cancel orders completely.
Volatility in exchange rates resulting from Brexit is expected to continue in the short term as the U.K. negotiates its exit from the E.U. We translate sales and other results denominated in foreign currency into U.S. dollars for our financial statements. During periods of a strengthening dollar, our reported international sales and earnings could be reduced because foreign currencies may translate into fewer U.S. dollars.
In addition, Brexit could lead to legal uncertainty and potentially divergent national laws and regulations as the U.K. determines which E.U. laws to replace or replicate, and those laws and regulations may be cumbersome, difficult or costly in terms of compliance. Any of these effects of Brexit, among others, could adversely affect our business, financial condition, operating results and cash flows.
Risks Related to the Companys Industry
If IS&S is unable to respond to rapid technological change, its products could become obsolete and its reputation could suffer.
Future generations of flat panel displays, air data systems, engine and fuel displays, and flight management systems which embody new technologies or new industry standards could render the Companys products obsolete. The market for aviation products is subject to rapid technological change, new product introductions, changes in customer preferences, and evolving industry standards and government regulations. The Companys future success will depend on its ability to:
· embrace rapidly changing technologies;
· adapt the Companys products to evolving industry standards and government regulations; and
· develop and introduce timely, high quality, cost effective new products, and product enhancements to address the increasingly sophisticated needs of its customers.
If IS&S fails to modify or improve its products in response to evolving industry standards and government regulations, its products could rapidly become obsolete.
The Companys products are currently subject to direct regulation by the FAA and other equivalent organizations. The Companys products, as they relate to aircraft applications, must be approved by the FAA, EASA, or other equivalent organizations before they can be installed in an aircraft. To be certified, IS&S must demonstrate that its products are accurate and able to maintain certain levels of repeatability over time. Although certification requirements of the FAA and EASA are substantially similar, no formal reciprocity exists between the two regulators. Accordingly, even though the Companys products are FAA approved, it may need to obtain approval from EASA or other appropriate organizations to have them certified for installation outside the United States.
Significant delay in receiving certification for newly developed products or enhancements to the Companys products, or the loss of certification for its existing products, could result in lost sales or delays in sales. Furthermore, new regulations or product standards, and changes to existing product standards could require IS&S to change its products and underlying technology. IS&S cannot ensure that it will receive regulatory approval on a timely basis or at all.
Inasmuch as the Companys products utilize sophisticated technology and are deployed in complex aircraft cockpit environments, problems with these products may arise that could harm the Companys reputation for quality assurance and, consequently, its business prospects.
The Companys products use complex system designs and components that may contain errors, omissions, or defects, particularly when the Company incorporates new technologies into its products or when it releases new versions or enhancements of its existing products. Despite the Companys quality assurance process, errors, omissions or defects could occur in its current products, in new products, or in new versions or enhancements of existing products. IS&S may be required to redesign or recall those products or pay damages. Such an event could result in the following:
· delay or loss of revenues;
· cancellation of customer contracts;
· diversion of development resources;
· damage to the Companys reputation;
· increased service and warranty costs; or
· litigation costs.
Although IS&S carries product liability insurance, this insurance may not be adequate to cover its losses in the event of a large product liability claim. In addition, IS&S may not be able to maintain such insurance in the future.
The Company has limited experience in marketing and distributing its products internationally.
IS&S plans to derive increasing revenues from sales outside the United States, particularly in Europe. Risks inherent in doing business internationally include:
· differing regulatory requirements;
· legal uncertainty regarding liability;
· tariffs, trade barriers, and other regulatory barriers;
· political and economic instability;
· changes in diplomatic and trade relationships;
· potentially adverse tax consequences;
· the impact of recessions in economies outside the United States; and
· variances and unexpected changes in local laws and regulations.
Currently, all of the Companys international sales are denominated in U.S. dollars. An increase in the dollars value compared to other currencies could render its products less competitive in the international markets. In the future, IS&S may be required to conduct sales in the foreign countrys local currency, thus exposing the Company to fluctuations and volatility in exchange rates that could adversely affect its operating results.
Item 1B. Unresolved Staff Comments.
None
In fiscal 2001, IS&S purchased 7.5 acres of land in the Eagleview Corporate Park in Exton, Pennsylvania. Shortly thereafter, the Company constructed a 45,000 square foot design, manufacturing and office facility on this site. Land development approval allows for expansion of up to 20,400 square feet. Such expansion would provide for a 65,400 square foot facility which the Company believes is adequate to meet the needs of the Company for the foreseeable future.
The Company also occupies approximately 8,358 square feet of office and warehouse space in Exton, Pennsylvania under a lease expiring March, 2018. The lease contains two options to extend the lease for a total of six additional years. The Companys current annual lease expense for this property is approximately $61,000.
The Company leases a hanger to house the Companys airplane in New Castle County, Delaware under a month to month lease. The annual lease expense is $21,000.
In the ordinary course of business, the Company is at time subject to various legal proceedings and claims. Except as set forth below with respect to the Delta matter, IS&S does not believe any such matters that are currently pending will have a material effect on its results of operations or financial position.
The Company previously announced that Delta Airlines (Delta) purported to terminate its contract with the Company to develop, manufacture and install new cockpit displays and certain navigation capabilities on Deltas fleet of approximately 182 MD88 and MD90 aircraft. The Company initiated and engaged in a non-binding mediation with Delta on February 25, 2015. The mediation session did not resolve the dispute. On February 25, 2015, the Company filed a complaint against Delta in the United States District Court for the Eastern District of Pennsylvania for breach of contract. The Company has alleged in the case, captioned Innovative Solutions & Support, Inc. v. Delta Airlines, Inc. E.D. Pa. Civ. No. 15-959, that Deltas purported termination of the contract was wrongful and in breach of the terms of the contract, and is seeking monetary damages. On March 20, 2015, Delta answered the Companys complaint and filed counterclaims against the Company for breach of contract and breach of the duty of good faith and
fair dealing, also seeking monetary damages. The parties have completed discovery and have each filed motions for summary judgment, which motions the court has not yet ruled on. The outcome of the litigation is not determinable at this time. The Company had $3.6 million of unbilled receivables and $0.2 million of inventory on its balance sheet relating to the Delta program at September 30, 2016 both of which are fully reserved.
Item 4. Mine Safety Disclosures.
Not applicable.
Item 5. Market for the Registrants Common Equity, Related Stockholder Matters, and Issuer Repurchases of Equity Securities.
The Companys common stock has been traded on the NASDAQ Stock Market, LLC under the symbol ISSC since its initial public offering on August 4, 2000. The following table lists the high and low per share sale prices for the common stock for the periods indicated:
|
|
Fiscal Year 2016 |
|
Fiscal Year 2015 |
| ||||||||
Period |
|
High |
|
Low |
|
High |
|
Low |
| ||||
First Quarter |
|
$ |
2.95 |
|
$ |
2.27 |
|
$ |
5.31 |
|
$ |
2.38 |
|
Second Quarter |
|
2.92 |
|
2.35 |
|
4.45 |
|
2.95 |
| ||||
Third Quarter |
|
3.06 |
|
2.55 |
|
4.05 |
|
2.92 |
| ||||
Fourth Quarter |
|
3.35 |
|
2.58 |
|
3.40 |
|
2.52 |
| ||||
On November 30, 2016, there were 16 holders of record of the shares of outstanding common stock. This total does not reflect beneficial shareholders who hold their stock in nominee or street name through brokerage firms.
On April 14, 2016, the Companys Board of Directors approved the extension of the Companys share repurchase program (originally approved on April 29, 2013 and previously extended in each of April 2014 and April 2015) which allows the Company to acquire up to 250,000 shares of its outstanding common stock for one year beginning May 1, 2016. Under the share repurchase program, the Company may purchase shares of its common stock through open market transactions, in privately negotiated block purchases, or in other private transactions (either solicited or unsolicited). The timing and amount of repurchase transactions under this program will depend on market conditions, and corporate and regulatory considerations. The program may be discontinued or suspended at any time. The Company funding for this program was to come from available corporate funds, including cash on hand and future cash flow. During the year ended September 30, 2016, the Company purchased 250,000 shares of its common stock under the program. The aggregate cost of the shares purchased was $724,776 at an average cost per share of $2.90. As of September 30, 2016, no shares are available to be purchased under the program.
The following table sets forth the purchases made under this plan for each month of the fiscal year ended September 30, 2016:
|
|
|
|
|
|
Total Number of |
|
Number of |
| |
|
|
|
|
|
|
Shares Purchased as |
|
Shares that May |
| |
|
|
|
|
|
|
Part of Publicly |
|
Yet Be Purchased |
| |
|
|
Total Number of |
|
Average Price Paid |
|
Announced Plans or |
|
Under the |
| |
Period |
|
Shares Purchased |
|
per Share |
|
Programs |
|
Program |
| |
|
|
|
|
|
|
|
|
|
| |
October 2015 |
|
|
|
$ |
|
|
|
|
250,000 |
|
November 2015 |
|
|
|
|
|
|
|
250,000 |
| |
December 2015 |
|
|
|
|
|
|
|
250,000 |
| |
January 2016 |
|
|
|
|
|
|
|
250,000 |
| |
February 2016 |
|
|
|
|
|
|
|
250,000 |
| |
March 2016 |
|
|
|
|
|
|
|
250,000 |
| |
April 2016 |
|
|
|
|
|
|
|
250,000 |
| |
May 2016 |
|
4,910 |
|
2.83 |
|
4,910 |
|
245,090 |
| |
June 2016 |
|
52,255 |
|
2.96 |
|
52,255 |
|
192,835 |
| |
July 2016 |
|
4,765 |
|
2.95 |
|
4,765 |
|
188,070 |
| |
August 2016 |
|
181,399 |
|
2.85 |
|
181,399 |
|
6,671 |
| |
September 2016 |
|
6,671 |
|
3.00 |
|
6,671 |
|
|
| |
|
|
250,000 |
|
$ |
2.90 |
|
250,000 |
|
|
|
The Company did not pay dividends in fiscal 2016 or fiscal 2015. The declaration and payment of any dividend in the future will be at the discretion of the Companys Board of Directors.
The graph below shows the cumulative shareholder return on $100 invested at the market close on September 30, 2011 through and including September 30, 2016, the last trading day before the end of the Companys most recently completed fiscal year, with the cumulative total return over the same time period of the same amount invested in the NASDAQ Composite Index, the Russell 2000 Index, and the Dow Jones US Aerospace & Defense Index.
COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among Innovative Solutions and Support, Inc., the NASDAQ Composite Index,
the Russell 2000 Index and the Dow Jones US Aerospace & Defense Index
*$100 invested on 9/30/11 in stock or index, including reinvestment of dividends.
Fiscal year ending September 30.
Copyright© 2016 S&P Dow Jones Indices LLC, a division of S&P Global. All rights reserved.
Copyright© 2016 Russell Investment Group. All rights reserved.
|
|
9/11 |
|
9/12 |
|
9/13 |
|
9/14 |
|
9/15 |
|
9/16 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Innovative Solutions and Support, Inc. |
|
100.00 |
|
82.40 |
|
237.09 |
|
155.33 |
|
80.72 |
|
95.01 |
|
NASDAQ Composite |
|
100.00 |
|
131.89 |
|
163.47 |
|
195.96 |
|
202.60 |
|
234.66 |
|
Russell 2000 |
|
100.00 |
|
131.91 |
|
171.55 |
|
178.30 |
|
180.52 |
|
208.44 |
|
Dow Jones US Aerospace & Defense |
|
100.00 |
|
119.51 |
|
174.23 |
|
207.37 |
|
213.88 |
|
249.78 |
|
Item 6. Selected Consolidated Financial Data.
The following tables present portions of the Companys consolidated financial statements. The following selected consolidated financial data set forth below should be read together with Managements Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and related notes to the consolidated financial statements appearing elsewhere herein. The selected statement of income data for the fiscal years ended September 30, 2016, 2015 and 2014 and the balance sheet data as at September 30, 2016 and 2015 are derived from the Companys audited consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The selected statements of income data for the fiscal years ended September 30, 2013 and 2012 and the balance sheet data as at September 30, 2014, 2013 and 2012 are extracted from the Companys audited consolidated financial statements that are not included in this Annual Report on Form 10-K.
|
|
Fiscal year ended September 30, |
| |||||||||||||
|
|
2016 |
|
2015 |
|
2014 |
|
2013 |
|
2012 |
| |||||
Statement of Income Data: |
|
|
|
|
|
|
|
|
|
|
| |||||
Net sales |
|
$ |
27,969,703 |
|
$ |
20,067,084 |
|
$ |
44,095,023 |
|
$ |
31,567,307 |
|
$ |
24,578,198 |
|
Cost of sales |
|
11,482,323 |
|
13,135,349 |
|
30,508,823 |
|
18,942,737 |
|
14,067,933 |
| |||||
Gross profit |
|
16,487,380 |
|
6,931,735 |
|
13,586,200 |
|
12,624,570 |
|
10,510,265 |
| |||||
Research and development |
|
4,873,328 |
|
2,705,208 |
|
2,618,054 |
|
2,578,034 |
|
2,693,554 |
| |||||
Selling, general and administrative |
|
9,170,865 |
|
7,847,271 |
|
11,111,014 |
|
8,119,071 |
|
7,400,199 |
| |||||
Total operating expenses |
|
14,044,193 |
|
10,552,478 |
|
13,729,068 |
|
10,697,105 |
|
10,093,753 |
| |||||
Operating income (loss) |
|
2,443,187 |
|
(3,620,743 |
) |
(142,868 |
) |
1,927,465 |
|
416,512 |
| |||||
Interest income, net |
|
33,504 |
|
24,804 |
|
21,756 |
|
41,174 |
|
100,414 |
| |||||
Other income |
|
78,440 |
|
33,283 |
|
37,758 |
|
38,120 |
|
65,005 |
| |||||
Income (loss) before income taxes |
|
2,555,131 |
|
(3,562,656 |
) |
(83,354 |
) |
2,006,759 |
|
581,931 |
| |||||
Income tax expense (benefit) |
|
568,330 |
|
2,303,479 |
|
(283,622 |
) |
119,842 |
|
(2,397,063 |
) | |||||
Net income (loss) |
|
$ |
1,986,801 |
|
$ |
(5,866,134 |
) |
$ |
200,268 |
|
$ |
1,886,917 |
|
$ |
2,978,994 |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Net income (loss) per common share: |
|
|
|
|
|
|
|
|
|
|
| |||||
Basic |
|
$ |
0.12 |
|
$ |
(0.35 |
) |
$ |
0.01 |
|
$ |
0.11 |
|
$ |
0.18 |
|
Diluted |
|
$ |
0.12 |
|
$ |
(0.35 |
) |
$ |
0.01 |
|
$ |
0.11 |
|
$ |
0.18 |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Cash dividends declared per common share |
|
$ |
|
|
$ |
|
|
$ |
|
|
$ |
1.50 |
|
$ |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Weighted average shares outstanding: |
|
|
|
|
|
|
|
|
|
|
| |||||
Basic |
|
16,927,055 |
|
16,924,189 |
|
16,927,879 |
|
16,753,068 |
|
16,641,895 |
| |||||
Diluted |
|
17,039,296 |
|
16,924,189 |
|
17,149,106 |
|
16,855,854 |
|
16,641,900 |
|
|
|
As of September 30, |
| |||||||||||||
|
|
2016 |
|
2015 |
|
2014 |
|
2013 |
|
2012 |
| |||||
Balance Sheet Data: |
|
|
|
|
|
|
|
|
|
|
| |||||
Cash and cash equivalents |
|
$ |
18,767,661 |
|
$ |
16,282,039 |
|
$ |
15,214,584 |
|
$ |
16,386,207 |
|
$ |
42,977,501 |
|
Working capital |
|
25,796,195 |
|
23,654,719 |
|
26,274,806 |
|
25,942,235 |
|
47,499,376 |
| |||||
Total assets |
|
36,488,969 |
|
36,106,569 |
|
44,029,511 |
|
42,498,309 |
|
62,468,233 |
| |||||
Total shareholders equity |
|
32,848,004 |
|
31,342,486 |
|
37,011,524 |
|
35,994,247 |
|
57,080,403 |
| |||||
Item 7. Managements Discussion and Analysis of Financial Condition and Results of Operations.
The following discussion and analysis should be read in conjunction with Selected Consolidated Financial Data and the consolidated financial statements and related notes included in this report.
Overview
Innovative Solutions and Support, Inc. (the Company, or IS&S) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services, air data equipment, engine display systems, standby equipment, primary flight guidance and cockpit display systems for retrofit applications and original equipment manufacturers (OEMs). The Company supplies integrated Flight Management Systems (FMS), Flat Panel Display Systems (FPDS), Integrated Standby Units (ISU) and advanced Global Positioning System (GPS) receivers that enable reduced carbon footprint navigation.
The Company has continued to position itself as a system integrator, which capability provides the Company with the potential to generate more substantive orders over a broader product base. The strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, United States Department of Defense (DoD)/governmental, and foreign military markets. This approach, combined with the Companys industry experience, is designed to enable IS&S to develop high quality products and systems, to reduce product time to market and to achieve cost advantages over products offered by its competitors.
The Company sells to both the OEM and the retrofit markets. Customers include various OEMS, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers and foreign militaries. Occasionally, IS&S sells its products directly to DoD; however, the Company sells its products primarily to commercial customers for end use in DoD programs. Sales to defense contractors are generally made on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts.
Cost of sales related to product sales is comprised of material, components and third party avionics purchased from suppliers, direct labor, and overhead costs. Many of the components are standard, although certain parts are manufactured to meet IS&S specifications. The overhead portion of cost of sales is comprised primarily of salaries and benefits, building occupancy costs, supplies, and outside service costs related to production, purchasing, material control, and quality control. Cost of sales includes warranty costs.
Cost of sales related to Engineering Development Contracts (EDC) sales is comprised of engineering labor, consulting services, and other costs associated with specific design and development projects. These costs are incurred pursuant to contractual arrangements and are accounted for typically as contract costs within cost of sales with the reimbursement accounted for as a sale in accordance with the percentage-of-completion method of accounting. Company funded research and development (R&D) expenditures relate to internally-funded efforts towards the development of new products and the improvement of existing products. These costs are expensed as incurred and reported as R&D expenses. The Company intends to continue investing in the development of new products that complement current product offerings and to expense associated R&D costs as they are incurred.
Selling, general and administrative expenses consist of sales, marketing, business development, professional services, salaries and benefits for executive and administrative personnel, facility costs, recruiting, legal, accounting, bad debt expense and other general corporate expenses.
IS&S sells its products to agencies of the United States and foreign governments, aircraft operators, aircraft modification centers, and original equipment manufacturers. The Companys customers have been and may continue to be affected by economic conditions in the United States and abroad. Such conditions may cause the Companys customers to curtail or delay their spending on both new and existing aircraft. Factors that can impact general economic conditions and the level of spending by IS&S customers include, but are not limited to, general levels of consumer spending, increases in fuel and energy costs, conditions in the real estate and mortgage markets, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors which can affect spending behavior. In addition, the Budget Control Act of 2011 triggered substantial, automatic reductions in both defense and discretionary spending. The automatic across-the-board sequestration cuts are in addition to certain other reductions already reflected in defense funding. Furthermore, spending by government agencies may be reduced in the future if tax revenues decline. If the Companys customers curtail or delay their spending, or are forced to declare bankruptcy or liquidate their operations because of adverse economic conditions, IS&Ss revenues and results of operations will be negatively affected. However, the Company believes that, in an uncertain economic environment, customers that may have otherwise elected to purchase newly manufactured aircraft, may be interested instead in retrofitting existing aircraft as a cost effective alternative, thereby creating market opportunity for IS&S.
The Company experienced decreases in personnel costs in fiscal year 2016 and 2015 primarily in the R&D and production departments. However, the Company increased the use of third party contractors in fiscal 2016 primarily in the production department. In fiscal years 2014 the Company experienced an increase in the R&D and production departments due to increased engineering development requirements and increased production activity.
Results of Operations
The following table sets forth statement of income data expressed as a percentage of total net sales for the fiscal years indicated (some items may not add due to rounding):
|
|
Twelve Months Ending September 30, |
| ||||
|
|
2016 |
|
2015 |
|
2014 |
|
Net sales: |
|
|
|
|
|
|
|
Product |
|
96.5 |
% |
72.6 |
% |
68.0 |
% |
Engineering development contracts |
|
3.5 |
% |
27.4 |
% |
32.0 |
% |
Total net sales |
|
100.0 |
% |
100.0 |
% |
100.0 |
% |
|
|
|
|
|
|
|
|
Cost of sales: |
|
|
|
|
|
|
|
Product |
|
39.8 |
% |
42.0 |
% |
34.1 |
% |
Engineering development contracts |
|
1.3 |
% |
23.5 |
% |
35.1 |
% |
Total cost of sales |
|
41.1 |
% |
65.5 |
% |
69.2 |
% |
|
|
|
|
|
|
|
|
Gross profit |
|
58.9 |
% |
34.5 |
% |
30.8 |
% |
|
|
|
|
|
|
|
|
Operating expenses: |
|
|
|
|
|
|
|
Research and development |
|
17.4 |
% |
13.5 |
% |
5.9 |
% |
Selling, general and administrative |
|
32.8 |
% |
39.1 |
% |
25.2 |
% |
Total operating expenses |
|
50.2 |
% |
52.6 |
% |
31.1 |
% |
|
|
|
|
|
|
|
|
Operating income (loss) |
|
8.7 |
% |
(18.1 |
)% |
(0.3 |
)% |
|
|
|
|
|
|
|
|
Interest income |
|
0.1 |
% |
0.1 |
% |
0.0 |
% |
Other income |
|
0.3 |
% |
0.2 |
% |
0.1 |
% |
|
|
|
|
|
|
|
|
Income (loss) before income taxes |
|
9.1 |
% |
(17.8 |
)% |
(0.1 |
)% |
|
|
|
|
|
|
|
|
Income tax expense (benefit) |
|
2.0 |
% |
11.4 |
% |
(0.6 |
)% |
|
|
|
|
|
|
|
|
Net income (loss) |
|
7.1 |
% |
(29.2 |
)% |
0.5 |
% |
Fiscal Year Ended September 30, 2016 Compared to Fiscal Year Ended September 30, 2015
Net sales. Net sales increased $8.0 million, or 39.4%, to $28.0 million for fiscal 2016 from $20.1 million for fiscal 2015. For fiscal 2016, product sales increased $12.4 million and EDC sales decreased $4.5 million, in each case, compared to fiscal 2015. The increase in product sales was primarily the result of increased shipments of displays for retrofit programs to commercial transport customers, the DoD, and commercial subcontractors as a result of increased demand compared to fiscal 2015. The decrease in EDC sales was primarily the result of less revenue being recognized from EDC projects awarded in prior years as they are nearing completion and they have not been replaced by new EDC projects.
Cost of sales. Cost of sales was $11.5 million, or 41.1% of net sales, for fiscal 2016 compared to $13.1 million, or 65.5% of net sales, in fiscal 2015. The decrease in cost of sales was primarily the result of decreased sales volume in the Companys EDC programs, partially offset by increased manufacturing costs reflecting increased product sales. The Companys overall gross margin in fiscal 2016 was 58.9% compared to 34.5% in fiscal 2015. The overall margin increase primarily reflects the effect of increased product sales, the recognition of deferred revenue and increased production volume relative to fixed costs. The overall gross margin increase was also impacted by an increase in gross margin on EDC programs, from 14% in fiscal 2015 to 68% in fiscal 2016. The fiscal 2016 EDC margin includes the reversal of a loss accrual in the amount of $0.5 million as the Company negotiated changes in January 2016 to its arrangement with a certain customer whereby the Companys obligation with certain product deliverables were cancelled.
Research and development (R&D). R&D expense was $4.9 million for fiscal 2016 and $2.7 million for fiscal 2015. R&D expense increased to 17.4% of net sales in fiscal 2016 compared to 13.5% in fiscal 2015, reflecting a higher proportion of engineering hours incurred on internal R&D projects as the EDC programs are nearing completion.
Selling, general, and administrative. Selling, general and administrative expenses increased $1.3 million, or 16.9%, to $9.2 million, or 32.8% of net sales, for fiscal 2016 from $7.8 million, or 39.1% of net sales, for fiscal 2015. The increase in selling, general and administrative expenses for the year ended September 30, 2016 primarily reflects increased legal expense related to litigation arising from the termination of the Delta contract in 2014 and increased audit fees. The increase was partially offset by the reduction of bad debt expense in fiscal 2016 versus fiscal 2015. In fiscal 2015 a $1.3 million bad debt expense was incurred due to an impairment of an unbilled receivable.
Interest income, net. Net interest income increased by $9,000 to $34,000 for fiscal 2016 from $25,000 for fiscal 2015. The increase in interest was primarily the result of higher cash balances throughout the year ended September 30, 2016 as compared to the year ended September 30, 2015.
Other income. Other income for fiscal 2016 and fiscal 2015 was $78,000 and $33,000, respectively. The increase in fiscal 2016 was primarily the result of higher royalties earned compared to fiscal 2015.
Income taxes. Income tax expense for the fiscal year ended September 30, 2016 was $0.6 million compared to an income tax expense of $2.3 million for the fiscal year ended September 30, 2015.
The effective tax rate for the year ended September 30, 2016 was 22.2%. The effective tax rate differs from the statutory rate primarily due to favorable temporary differences, Federal Research and Development Tax Credits utilization and an associated reduction to the valuation allowance.
Net income. As a result of the factors described above, the Companys net income for fiscal 2016 was $2.0 million compared to a net loss of $5.9 million for fiscal 2015. On a fully diluted basis, net income per share was $0.12 for fiscal 2016, compared to a net loss of $0.35 per share for fiscal 2015.
Fiscal Year Ended September 30, 2015 Compared to Fiscal Year Ended September 30, 2014
Net sales. Net sales decreased $24.0 million, or 54.5%, to $20.1 million for fiscal 2015 from $44.1 million for fiscal 2014. For fiscal 2015, product sales decreased $15.4 million and EDC sales decreased $8.6 million from fiscal 2014. The decrease in product sales was primarily the result of decreased shipments of displays for retrofit programs to commercial transport customers, the DoD, and commercial subcontractors as a result of reduced demand compared to fiscal 2014. The decrease in EDC sales was primarily the result of less revenue being recognized from EDC projects awarded in prior years as they are nearing completion and they have not been replaced by new EDC projects.
Cost of sales. Cost of sales was $13.1 million, or 65.5% of net sales for fiscal 2015 compared to $30.5 million or 69.2% of net sales in fiscal 2014. The decrease in cost of sales was primarily the result of decreased sales volume in both the Companys product and EDC programs. The Companys overall gross margin in fiscal 2015 was 34.5% as compared to 30.8% in fiscal 2014. The overall margin increase primarily reflects the effect of catch up adjustments of $117,000 on EDC contracts for fiscal 2015 in contrast to EDC margins in fiscal 2014 that were negatively impacted by net cumulative catch-up adjustments of $1.5 million. The improvement in EDC sales gross margin was partially offset by lower product gross margin primarily the result of reduced coverage of fixed costs due to lower sales volume.
Research and development (R&D). R&D expense was $2.7 million for fiscal 2015 and $2.6 million for fiscal 2014. R&D expense increased to 13.5% of net sales in fiscal 2015 compared to 5.9% in fiscal 2014, reflecting the decrease in fiscal 2015 net sales and a higher proportion of engineering hours incurred on internal R&D projects as the EDC programs are nearing completion.
Selling, general, and administrative. Selling, general and administrative expenses decreased $3.3 million, or 29.4%, to $7.8 million or 39.1% of net sales for fiscal 2015 from $11.1 million or 25.2% of net sales, for fiscal 2014. The decrease in selling, general and administrative expenses for the year ended September 30, 2015 primarily reflects bad debt expense of $1.3 million as compared to $3.7 million of bad debt expense in the year ended September 30, 2014, lower personnel costs and lower professional fees partially offset by higher legal fees primarily related to the Delta matter. The bad debt expense of $1.3 million in fiscal 2015 is due to an impairment of an unbilled receivable. The Company has renegotiated and executed a new agreement in January 2016 with a customer to provide products and services with current technology. Therefore, the unbilled amount is impaired. We expect that this agreement will result in approximately $1.2 million positive impact from a reversal of a total liability of $1.2 million comprising of deferred revenue and contract loss accrual to the statement of operations in Q2 2016 due to the extinguishment of our obligation to deliver certain products under the original contract. The bad debt expense of $3.7 million in fiscal 2014 related to the Delta contract, (See Item 3. Legal Proceedings.).
Interest income, net. Net interest income increased by $3,000 to $25,000 for fiscal 2015 from $22,000 for fiscal 2014. The increase in interest was primarily the result of higher cash balances throughout the year ended September 30, 2015 as compared to the year ended September 30, 2014.
Other income. Other income for fiscal 2015 and fiscal 2014 were $33,000 and $38,000, respectively. The decrease in fiscal 2015 was primarily the result of lower royalties earned compared to fiscal 2014.
Income taxes. The income tax expense for fiscal year ended September 30, 2015 was $2.3 million compared to an income tax benefit of $0.3million or for the fiscal year ended September 30, 2014. The tax benefit for the fiscal year ended September 30, 2014 resulted from a pretax loss of $0.1 million and the favorable impact of the Federal Research and Development Tax Credits.
The effective tax rate for the year ended September 30, 2015 was (64.7%) as a result of an increase in the Companys net operating loss valuation allowance due to the uncertainty on the Companys ability to generate sufficient future taxable income to realize the majority of such deferred tax assets. The effective tax rate differs from the statutory rate for the year ended September 30, 2015 primarily because of a valuation allowance recorded on the majority of the federal and state tax assets, net of liabilities.
Net income. As a result of the factors described above, the Companys net loss for fiscal 2015 was $5.9 million compared to net income of $0.2 million for fiscal 2014. On a fully diluted basis, the net loss per share was $0.35 for fiscal 2015, compared to net income of $0.01 for fiscal 2014.
Liquidity and Capital Resources
The following table highlights key financial measurements of the Company:
|
|
September 30, |
|
September 30, |
| ||
|
|
2016 |
|
2015 |
| ||
Cash and cash equivalents |
|
$ |
18,767,661 |
|
$ |
16,282,039 |
|
Accounts receivable |
|
$ |
4,511,091 |
|
$ |
2,394,695 |
|
Current assets |
|
$ |
29,369,459 |
|
$ |
28,415,976 |
|
Current liabilities |
|
$ |
3,573,264 |
|
$ |
4,761,257 |
|
Deferred revenue |
|
$ |
179,585 |
|
$ |
756,745 |
|
Other non-current liabilities (1) |
|
$ |
67,701 |
|
$ |
2,826 |
|
Quick ratio (2) |
|
6.51 |
|
3.92 |
| ||
Current ratio (3) |
|
8.22 |
|
5.97 |
|
|
|
Twelve Months Ended September 30, |
| |||||||
|
|
2016 |
|
2015 |
|
2014 |
| |||
Cash flow activites: |
|
|
|
|
|
|
| |||
Net cash provided by (used in) operating activites |
|
$ |
3,562,053 |
|
$ |
1,401,589 |
|
$ |
(712,206 |
) |
Net cash used in investing activites |
|
(351,654 |
) |
(118,964 |
) |
(718,922 |
) | |||
Net cash (used in) provided by financing activites |
|
(724,777 |
) |
(215,170 |
) |
259,505 |
| |||
(1) Excludes deferred revenue
(2) Calculated as: the sum of cash and cash equivalents plus accounts receivable, net, divided by current liabilities
(3) Calculated as: current assets divided by current liabilities
The Companys principal source of liquidity has been cash flows from current year operations and cash accumulated from prior years operations. Cash is used principally to finance inventory, accounts receivable, unbilled receivables, and payroll.
Operating Activities
The Company generated $3.6 million of cash from operations during fiscal 2016 as compared to $1.4 million during fiscal 2015. The cash provided by operating activities for the year ended September 30, 2016 was primarily comprised of net income of $2.0 million, the decrease in net unbilled receivables of $2.3 million, the reduction to inventory of $1.0 million a reduction to deferred taxes of $0.5 million and depreciation of $0.5 million, partially offset by the increase of accounts receivable of $2.1 million and the decrease in accrued expenses of $0.7 million. Unbilled receivables represent principally sales recorded under the percentage-of-completion method of accounting that have not been billed to customers in accordance with applicable contract terms on engineering development projects. The decrease in unbilled receivables reflects the billing of milestones achieved in the engineering development contract as they near completion in fiscal 2016.
The Company generated $1.4 million of cash during fiscal 2015 as compared to a use of $0.7 million of cash in operating activities during fiscal 2014. The cash provided by operating activities for the year ended September 30, 2015 resulted primarily from a decrease in accounts receivable and net unbilled receivables of $2.0 million and $2.3 million respectively, partially offset by the decrease in accounts payable, accrued expenses and taxes payable of $1.0 million, $1.3 million and $0.4 million, respectively.
Investing Activities
Cash used in investing activities was $0.4 million and $0.1 million for fiscal years 2016 and 2015, respectively, and consisted of spending for production equipment and laboratory test equipment. The Company plans to continue investing in capital equipment to support engineering development efforts and operations.
Financing Activities
Cash used by financing activities was $0.7 million and $0.2 million for fiscal years 2016 and 2015, respectively, and consisted primarily from the purchase of treasury stock.
Summary
Future capital requirements depend upon numerous factors, including market acceptance of the Companys products, the timing and rate of expansion of business, acquisitions, joint ventures, and other factors. IS&S has experienced increases in expenditures since its inception and anticipates that expenditures will remain relatively constant with the levels experienced in fiscal 2016 and fiscal 2015 in the foreseeable future. The Company believes that its cash and cash equivalents will provide sufficient capital to fund operations for at least the next twelve months. Further, IS&S may need to develop and introduce new or enhanced products, to respond to competitive pressures, to invest in or acquire businesses or technologies, or to respond to unanticipated requirements or developments. If insufficient funds are available, the Company may not be able to introduce new products or to compete effectively.
Contractual Obligations
The Companys contractual obligations as of September 30, 2016 mature as follows:
|
|
Payments Due by Period |
| |||||||||||||
|
|
|
|
Less than |
|
|
|
|
|
After 5 |
| |||||
Contractual Obligations |
|
Total |
|
1 Year |
|
1-3 Years |
|
4-5 Years |
|
Years |
| |||||
Operating leases |
|
$ |
116,811 |
|
$ |
76,558 |
|
$ |
40,253 |
|
$ |
|
|
$ |
|
|
Purchase obligations (1) |
|
848,736 |
|
848,736 |
|
|
|
|
|
|
| |||||
|
|
$ |
965,547 |
|
$ |
925,294 |
|
$ |
40,253 |
|
$ |
|
|
$ |
|
|
(1) A purchase obligation is defined as an agreement to purchase goods or services that is enforceable and legally binding on the Company and that specifies all significant terms, including fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. These amounts are primarily comprised of open purchase order commitments entered in the ordinary course of business with vendors and subcontractors pertaining to fulfillment of the Companys current order backlog.
Off-Balance Sheet Arrangements
The Company has no off-balance sheet arrangements.
Inflation
IS&S does not believe inflation had a material effect on its financial position or results of operations during the past three years; however, it cannot predict future effects of inflation.
Critical Accounting Policies
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (GAAP) requires management to make estimates and assumptions that affect reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. The Companys most critical accounting policies are revenue recognition, income taxes, inventory valuation, share based compensation and warranty reserves.
Revenue recognition
The Company enters into sales arrangements with customers that, in general, provide for the Company to design, develop, manufacture and deliver air data equipment, large flat-panel display systems, and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation, airspeed, altitude, and engine and fuel data measurements. The Companys sales arrangements may include multiple deliverables as defined in FASB ASC Topic 605-25 Multiple-Element Arrangements (ASC Topic 605-25), which typically include design and engineering services and the production and delivery of the flat panel display and related components. The Company includes any design and engineering services elements in EDC sales and any functional upgrade and product elements in product sales on the accompanying consolidated statements of income.
To the extent that an arrangement contains software elements that are essential to the functionality of tangible products sold in the arrangement, the Company recognizes revenue for the deliverables in accordance with the guidance included in FASB Accounting Update 2009-14, Revenue Arrangements That Include Software Elements (ASU 2009-14); and FASB Accounting Standards Update 2009-13, Multiple-Deliverable Revenue Arrangements-a consensus of the FASB Emerging Issues Task Force (ASU 2009-13); and FASB ASC Topic 605, Revenue Recognition (ASC Topic 605).
To the extent that an arrangement contains software components, which include functional upgrades that are sold on a standalone basis and which the Company has deemed outside the scope of the exception defined by ASU 2009-14, the Company recognizes software revenue in accordance with ASC Topic 985, Software (ASC Topic 985).
Multiple Element Arrangements
The Company identifies all goods and/or services that are to be delivered separately under such a sales arrangement and allocates sales to each deliverable (if more than one) based on that deliverables selling price. The Company considers the appropriate recognition method for each deliverable. The Companys multiple element arrangements can include defined design and development activities, functional upgrades, and product sales.
The Company utilizes the selling price hierarchy that has been established by FASB ASU 2009-13, which requires that the selling price for each deliverable be based on vendor-specific objective evidence if available, third-party evidence if vendor-specific objective evidence is not available, or estimated selling price if neither vendor-specific objective evidence nor third-party evidence is available. To the extent that an arrangement includes a deliverable for which estimated selling price is used, the Company determines the best estimate of selling price by applying the same pricing policies and methodologies that would be used to determine the price to sell the deliverable on a standalone basis.
To the extent that an arrangement contains defined design and EDC activities as an identified deliverable in addition to products (resulting in a multiple element arrangement), the Company recognizes as EDC sales amounts earned during the design and development phase of the contract following the guidance included in FASB ASC Topic 605-35, Construction-Type and Production-Type Contracts (ASC Topic 605-35). To the extent that multiple element arrangements include product sales, sales are generally recognized once revenue recognition criteria for the product deliverables have been met based on the provisions of ASC Topic 605. The Company includes any design and engineering services elements in EDC sales and any functional upgrade and product elements in product sales on the accompanying consolidated statements of income.
Single Element Arrangements
Products
To the extent that a single element arrangement provides for product sales and repairs, the Company recognizes revenue when revenue recognition criteria for the product deliverable have been met based on the provisions of ASC Topic 605. In addition, the Company receives orders for equipment and parts, and in general, recognizes revenue upon shipment to the customer.
The Company offers its customers extended warranties for additional fees, which it records as deferred revenue and recognizes as sales on a straight-line basis over the warranty periods.
Engineering development contract services
The Company may enter into contracts to perform specified design and EDC services related to its products. The Company recognizes revenue from these arrangements as EDC revenue, following the guidance included in ASC Topic 605-35, and considers the nature of these contracts (including term, size of contract, and level of effort) when determining the appropriate accounting treatment for a particular contract. For contracts that are long-term in nature the Company believes that the use of the percentage-of-completion method is appropriate as the Company has the ability to make reasonably dependable estimates of the extent of progress towards completion, contract revenues, and contract costs. In certain circumstances, the Company uses the completed contract method for all others contracts. Sales and profit margins under the percentage-of-completion method are recorded based on the ratio of actual costs incurred to total estimated costs expected to be incurred related to the contract under the cost-to-cost method.
The percentage-of-completion method of accounting requires the Company to estimate the profit margin for each individual contract, and to apply that profit margin on a uniform basis as sales are recorded under the contract. The estimation of profit margins requires the Company to make projections of the total sales to be generated and the total costs that will be incurred under a contract. The projections require the Company to make numerous assumptions and estimates relating to items such as the complexity of design and related development costs, performance of subcontractors, availability and cost of materials, engineering productivity and cost, overhead, and capital costs. Contracts sometimes include purchase options for additional quantities and customer change orders for additional or revised product functionality. Sales and costs related to profitable purchase options are included in the Companys estimates only when the options are exercised, while sales and costs related to unprofitable purchase options are included in the Companys estimates when exercise is determined to be probable. Sales related to change orders are included in profit estimates only if they can be estimated reliably and collectability is reasonably assured. Purchase options and change orders are accounted for either as an integral part of the original contract or separately, depending upon the nature and value of the item. Anticipated losses on contracts are recognized in full in the period in which losses become probable and estimable.
The Company reviews estimates of profit margins for contracts on a quarterly basis. Changes in these underlying estimates because of either revisions in sales and cost estimates or the exercise of contract options may result in profit margins being recognized unevenly over a contract because such changes are accounted for on a cumulative basis in the period in which estimates are revised. Significant changes in estimates related to accounting for long-term contracts may have a material effect on the Companys results of income in the period in which the revised estimate is made. Cumulative catch-up adjustments (loss contracts) resulting from changes in estimates are disclosed in the notes to the consolidated financial statements of the Company.
Income taxes
Income taxes are recorded in accordance with ASC Topic 740, Income Taxes (ASC Topic 740), which utilizes a balance sheet approach to provide for income taxes. Under this method, the Company recognizes deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of the Companys assets, liabilities, and expected benefits of utilizing NOL and tax credit carry-forwards. The impact on deferred taxes of changes in tax rates and laws, if any, are applied to the years during which temporary differences are expected to be settled, and are reflected in the consolidated financial statements in the period of enactment. At the end of each interim and year-end reporting period, the Company prepares an estimate of the annual effective income tax rate and applies that annual effective income tax rate to ordinary year-to-date pre-tax income for the interim period. Specific tax items discrete to a particular quarter are recorded in income tax expense for that quarter. The estimated annual effective tax rate used in providing for income taxes on a year-to-date basis may change in subsequent periods.
Deferred tax assets are reduced by a valuation allowance if, based on the consideration of all available evidence, it is more likely than not that some portion of the deferred tax asset will not be realized. Significant weight is given to evidence that can be objectively verified, and significant management judgment is required in determining any valuation allowance recorded against net deferred tax assets. The Company evaluates deferred income taxes on a quarterly basis to determine if a valuation allowance is required by considering available evidence. Deferred tax assets are recognized when expected future taxable income is sufficient to allow the related tax benefits to reduce taxes that would otherwise be payable. The sources of taxable income that may be available to realize the benefit of deferred tax assets are future reversals of existing taxable temporary differences, future taxable income exclusive of reversing temporary differences and credit carryforwards, taxable income in carryback years, and tax planning strategies which are both prudent and feasible. The Companys current balance of the deferred tax valuation allowance is recorded against the majority of
the federal and state deferred tax assets. The remaining amount of the deferred tax assets recognized are attributable to tax planning strategies and the ability to carryback federal tax losses to claim a tax refund. The Company will continue to assess all available evidence during future periods to evaluate any changes to the realization of its deferred tax assets. If the Company were to determine that it would be able to realize additional federal or state deferred tax assets in the future, it would make an adjustment to the valuation allowance which would reduce the provision for income taxes.
The accounting for uncertainty in income taxes requires a more likely than not threshold for financial statement recognition and measurement of tax positions taken or expected to be taken in a tax return. The Company records a liability for the difference between the (i) benefit recognized and measured for financial statement purposes and (ii) the tax position taken or expected to be taken on the Companys tax return. To the extent that the Companys assessment of such tax positions changes, the change in estimate is recorded in the period in which the determination is made. The Company has elected to record any interest or penalties associated with uncertain tax positions as income tax expense.
Inventory valuation
The Company values inventory at the lower of cost (first-in, first-out) or market. Inventories are written down for estimated obsolescence equal to the difference between inventory cost and estimated net realizable value based on a combination of historical usage and assumptions based on expected usage related to estimated future customer and market demands. The Companys method of valuing inventory contains uncertainties because the calculation requires management to consider inventory aging, to make assumptions regarding expected usage, and to apply judgments on forecasted future demand, market conditions, and technological obsolescence. If actual future demand or market conditions are less favorable than those projected by management, additional inventory write-down may be required.
Stock-based compensation
The Company accounts for stock-based compensation under FASB ASC Topic 505-50, Equity-Based Payments to Non-Employees (ASC Topic 505-50) and FASB ASC Topic 718, Stock Compensation (ASC Topic 718), which require the Company to measure the cost of employee or non-employee director services received in exchange for an award of equity instruments based on the grant-date fair value of the award using an option pricing model. That cost is recognized over the period during which an employee or non-employee director is required to provide service in exchange for the award.
Accordingly, adoption of ASC Topic 505-50s and ASC Topic 718s fair value method results in recording compensation costs under the Companys stock based compensation plans. The Company determined the fair value of its stock option awards at the date of grant using the Black-Scholes option pricing model. Option pricing models and generally accepted valuation techniques require management to make assumptions and to apply judgment to determine the fair value of its awards. These assumptions and judgments include estimating future volatility of the Companys stock price, expected dividend yield, future employee turnover rates, and future employee stock option exercise behaviors. Changes in these assumptions can materially affect fair value estimates. The Company does not believe that a reasonable likelihood exists that there will be a material change in future estimates or assumptions used to determine stock-based compensation expense. However, if actual results are not consistent with the Companys estimates or assumptions, the Company would adjust its estimates. Such adjustments could have a material impact on the Companys financial position.
Warranty reserves
The Company offers warranties on some products of various lengths, however the standard warranty is twenty-four months. At the time of shipment, the Company establishes a reserve estimated for costs of warranties based on its best estimate of the amounts necessary to settle future and existing claims using historical data on products sold as of the balance sheet date. The length of the warranty period, the products failure rates, and the customers usage affect warranty cost. If actual warranty costs differ from the Companys estimated amounts, future results of operations could be affected adversely. Warranty cost is recorded as cost of sales, and the reserve balance is recorded as an accrued expense. While the Company maintains product quality programs and processes, its warranty obligation is affected by product failure rates and the related corrective costs. If actual product failure rates and/or corrective costs differ from the estimates, the Company revises estimated warranty liability.
Self-insurance reserves
Since January 1, 2014, the Company has self-insured a significant portion of its employee medical insurance. The Company maintains a stop-loss insurance policy that limits its losses both on a per employee basis and an aggregate basis. Liabilities associated with the risks that are retained by the Company are estimated based upon actuarial assumptions such as historical claims experience, demographic factors and other actuarial assumptions. The Company estimated the total medical claims incurred but not reported and the Company believes that it has adequate reserves for these claims at September 30, 2016. However, the actual value of such claims could be significantly affected if future occurrences and claims differ from these assumptions. At September 30, 2016, the estimated liability for medical claims incurred but not reported was $52,600. The Company has recorded the excess of funded premiums over
estimated claims incurred but not reported of $253,000 as a current asset in the accompanying consolidated balance sheet. During the year ended September 30, 2016, the Company has used the excess of funded premiums to reduce amounts payable for claims incurred.
Treasury Stock
We account for treasury stock purchased under the cost method and include treasury stock as a component of stockholders equity. Treasury stock purchased with intent to retire (whether or not the retirement is actually accomplished) is charged to common stock.
New Accounting Pronouncements
In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842). Under this guidance, an entity is required to recognize right-of-use assets and lease liabilities on its balance sheet and disclose key information about leasing arrangements. This guidance offers specific accounting guidance for a lessee, a lessor and sale and leaseback transactions. Lessees and lessors are required to disclose qualitative and quantitative information about leasing arrangements to enable a user of the financial statements to assess the amount, timing and uncertainty of cash flows arising from leases. This guidance is effective for annual reporting periods beginning after December 15, 2018, including interim periods within that reporting period, and requires a modified retrospective adoption, with early adoption permitted. The Company is currently evaluating the impacts of adoption of this guidance.
In November 2015, the FASB issued ASU 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes, which simplifies balance sheet presentation of deferred income taxes. Previous guidance required an entity to separate deferred income tax liabilities and assets into current and noncurrent amounts in a classified statement of financial position; however, the new guidance requires that deferred tax liabilities and assets be classified as noncurrent in a classified statement of financial position. The updated standard is effective for the Company beginning October 1, 2017, with early adoption permitted as of the beginning of any interim or annual reporting period. The Company early adopted this standard retrospectively and reclassified its current deferred tax assets to noncurrent deferred tax assets for all periods presented. The adoption of this guidance did not have a material impact on the Companys consolidated financial statements.
In July 2015, the FASB issued guidance regarding Simplifying the Measurement of Inventory. This guidance requires entities to measure most inventory at the lower of cost and net realizable value, thereby simplifying the current guidance under which an entity must measure inventory at the lower of cost or market (market in this context is defined as one of three different measures). The guidance will not apply to inventories that are measured by using either the last-in, first-out (LIFO) method or the retail inventory method (RIM). The guidance is effective for the Company beginning October 1, 2017. Early adoption is permitted. The Company is currently assessing the impact of this guidance on its financial statements disclosure.
In August 2014, the FASB issued ASU No. 2014-15, Presentation of Financial Statements - Going Concern (Subtopic 205-40) (ASU 2014-15). The objective of ASU 2014-15 is to define managements responsibility to evaluate whether there is substantial doubt about an organizations ability to continue as a going concern and provide related disclosures. Currently, GAAP does not provide guidance to evaluate whether there is substantial doubt regarding an organizations ability to continue as a going concern. This ASU provides guidance to an organizations management, with principles and definitions to reduce diversity in the timing and content of financial statement disclosures commonly provided by organizations. ASU 2014-15 is effective for periods ending after December 15, 2016 and interim periods within annual periods beginning after December 15, 2016. Early adoption is permitted.
In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers (ASC Topic 606) (ASU 2014-09). ASU 2014-09 will supersede existing revenue recognition guidance and require revenue to be recognized when promised goods or services are transferred to customers in amounts that reflect the consideration to which the company expects to be entitled in exchange for those goods or services. The new standards were scheduled to be effective for reporting periods beginning after December 15, 2016, and early adoption is not permitted. However, on July 9, 2015, the FASB decided to delay the effective date of the new revenue standard by one year, but reporting entities may choose to adopt the standard as of the original effective date. Additionally, during 2016, the FASB issued ASU Nos. 2016-08, Revenue from Contracts with Customers (Topic 606): Principal versus Agent Considerations (Reporting Gross versus Net), ASU 2016-10, Revenue from Contracts with Customers (Topic 606): Identifying Performance Obligations and Licensing, and ASU 2016-12, Revenue from Contracts with Customers (Topic 606): Narrow-Scope Improvements and Practical Expedients, all of which should be adopted concurrent with ASU 2014-09. Adoption of the new rules could affect the timing of revenue recognition for certain transactions. The guidance permits two implementation approaches, one requiring retrospective application of the new standard with restatement of prior years and one requiring retrospective application of the new standard with the cumulative effect of applying the new standard as of the date of initial application recognized and disclosure of results under old standards. The FASB has recently issued an Exposure Draft of a proposed ASU that would delay by one year the effective date of this standard. The Company is currently evaluating the impacts of adoption and the implementation approach to be used.
As new accounting pronouncements are issued, we will adopt those that are applicable under the circumstances.
Business Segments
The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services flight guidance and cockpit display systems for OEMs and retrofit applications. Customers include commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, foreign militaries, and various OEMs. The Company currently derives the majority of its revenues from the sale of this equipment and related
EDC services. Almost all of the Companys sales, operating results and identifiable assets are in the United States. In fiscal year 2016, 2015, and 2014 net sales outside the United States amounted to $8.2 million, $6.6 million and $12.0 million, respectively.
Item 7A. Quantitative and qualitative disclosures about market risk.
The Companys operations are exposed to market risks primarily as a result of changes in interest rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Companys exposure to market risk for changes in interest rates relates to its cash equivalents. The Companys cash equivalents consist of funds invested in money market funds, which bear interest at a variable rate. The Company does not participate in interest rate hedging. A change in interest rates earned on the Companys cash equivalents would impact interest income and cash flows, but would not impact the fair market value of the underlying instruments. Assuming that the balances during fiscal 2016 were to remain constant and that the Company did not act to alter the existing interest rate sensitivity, a hypothetical 1% increase in variable interest rates would have affected interest income by approximately $0.2 million. This would result in a net impact on cash of approximately $0.2 million for fiscal 2016.
Item 8. Financial statements and supplementary data.
The financial statements of Innovative Solutions and Support, Inc. listed in the index appearing under Item 8 herein are filed as part of this Report.
Innovative Solutions and Support, Inc.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
|
Page |
35 | |
36 | |
37 | |
38 | |
39 | |
40-57 |
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
Board of Directors and Shareholders
Innovative Solutions and Support, Inc.
We have audited the accompanying consolidated balance sheets of Innovative Solutions and Support, Inc. (a Pennsylvania corporation) and subsidiaries (the Company) as of September 30, 2016 and 2015, and the related consolidated statements of income, shareholders equity, and cash flows for each of the three years in the period ended September 30, 2016. These financial statements are the responsibility of the Companys management. Our responsibility is to express an opinion on these financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Companys internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Companys internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Innovative Solutions and Support, Inc. and subsidiaries as of September 30, 2016 and 2015, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2016 in conformity with accounting principles generally accepted in the United States of America.
/s/ GRANT THORNTON LLP |
|
|
|
Philadelphia, Pennsylvania |
|
December 16, 2016 |
|
Grant Thornton LLP
U.S. member firm of Grant Thornton International Ltd
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
|
|
September 30, |
|
September 30, |
| ||
|
|
2016 |
|
2015 |
| ||
ASSETS | |||||||
Current assets |
|
|
|
|
| ||
Cash and cash equivalents |
|
$ |
18,767,661 |
|
$ |
16,282,039 |
|
Accounts receivable |
|
4,511,091 |
|
2,394,695 |
| ||
Unbilled receivables, net |
|
1,597,672 |
|
3,920,209 |
| ||
Inventories |
|
3,645,828 |
|
4,597,316 |
| ||
Prepaid expenses and other current assets |
|
847,207 |
|
1,221,717 |
| ||
|
|
|
|
|
| ||
Total current assets |
|
29,369,459 |
|
28,415,976 |
| ||
|
|
|
|
|
| ||
Property and equipment, net |
|
6,962,562 |
|
7,095,330 |
| ||
Non-current deferred income taxes |
|
|
|
426,315 |
| ||
Other assets |
|
156,948 |
|
168,948 |
| ||
|
|
|
|
|
| ||
Total assets |
|
$ |
36,488,969 |
|
$ |
36,106,569 |
|
|
|
|
|
|
| ||
LIABILITIES AND SHAREHOLDERS EQUITY | |||||||
|
|
|
|
|
| ||
Current liabilities |
|
|
|
|
| ||
Accounts payable |
|
$ |
1,503,771 |
|
$ |
1,435,981 |
|
Accrued expenses |
|
1,889,908 |
|
2,568,531 |
| ||
Deferred revenue |
|
179,585 |
|
756,745 |
| ||
|
|
|
|
|
| ||
Total current liabilities |
|
3,573,264 |
|
4,761,257 |
| ||
|
|
|
|
|
| ||
Non-current deferred income taxes |
|
67,701 |
|
|
| ||
Other liabilities |
|
|
|
2,826 |
| ||
|
|
|
|
|
| ||
Total liabilities |
|
3,640,965 |
|
4,764,083 |
| ||
|
|
|
|
|
| ||
Commitments and contingencies (See Note 14) |
|
|
|
|
| ||
|
|
|
|
|
| ||
Shareholders equity |
|
|
|
|
| ||
|
|
|
|
|
| ||
Preferred stock, 10,000,000 shares authorized, $.001 par value, of which 200,000 shares are authorized as Class A Convertible stock. No shares issued and outstanding at September 30, 2016 and 2015 |
|
|
|
|
| ||
|
|
|
|
|
| ||
Common stock, $.001 par value: 75,000,000 shares authorized, 18,812,465 and 18,756,089 issued at September 30, 2016 and 2015, respectively |
|
18,813 |
|
18,756 |
| ||
|
|
|
|
|
| ||
Additional paid-in capital |
|
51,392,159 |
|
51,148,722 |
| ||
Retained earnings |
|
2,805,569 |
|
818,768 |
| ||
Treasury stock, at cost, 2,096,451 shares at September 30, 2016 and 1,846,451 at September 30, 2015 |
|
(21,368,537 |
) |
(20,643,760 |
) | ||
|
|
|
|
|
| ||
Total shareholders equity |
|
32,848,004 |
|
31,342,486 |
| ||
|
|
|
|
|
| ||
Total liabilities and shareholders equity |
|
$ |
36,488,969 |
|
$ |
36,106,569 |
|
The accompanying notes are an integral part of these statements.
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF INCOME
|
|
For the Fiscal Year Ended September 30, |
| |||||||
|
|
2016 |
|
2015 |
|
2014 |
| |||
Net sales: |
|
|
|
|
|
|
| |||
Product |
|
$ |
26,985,899 |
|
$ |
14,573,475 |
|
$ |
29,975,410 |
|
Engineering development contracts |
|
983,804 |
|
5,493,609 |
|
14,119,613 |
| |||
Total net sales |
|
27,969,703 |
|
20,067,084 |
|
44,095,023 |
| |||
|
|
|
|
|
|
|
| |||
Cost of sales: |
|
|
|
|
|
|
| |||
Product |
|
11,112,339 |
|
8,417,571 |
|
15,050,608 |
| |||
Engineering development contracts |
|
369,984 |
|
4,717,778 |
|
15,458,215 |
| |||
Total cost of sales |
|
11,482,323 |
|
13,135,349 |
|
30,508,823 |
| |||
|
|
|
|
|
|
|
| |||
Gross profit |
|
16,487,380 |
|
6,931,735 |
|
13,586,200 |
| |||
|
|
|
|
|
|
|
| |||
Operating expenses: |
|
|
|
|
|
|
| |||
Research and development |
|
4,873,328 |
|
2,705,208 |
|
2,618,054 |
| |||
Selling, general and administrative |
|
9,170,865 |
|
7,847,270 |
|
11,111,014 |
| |||
Total operating expenses |
|
14,044,193 |
|
10,552,478 |
|
13,729,068 |
| |||
|
|
|
|
|
|
|
| |||
Operating income (loss) |
|
2,443,187 |
|
(3,620,743 |
) |
(142,868 |
) | |||
|
|
|
|
|
|
|
| |||
Interest income |
|
33,504 |
|
24,804 |
|
21,756 |
| |||
Other income |
|
78,440 |
|
33,283 |
|
37,758 |
| |||
Income (loss) before income taxes |
|
2,555,131 |
|
(3,562,656 |
) |
(83,354 |
) | |||
|
|
|
|
|
|
|
| |||
Income tax (benefit) expense |
|
568,330 |
|
2,303,478 |
|
(283,622 |
) | |||
|
|
|
|
|
|
|
| |||
Net income (loss) |
|
$ |
1,986,801 |
|
$ |
(5,866,134 |
) |
$ |
200,268 |
|
|
|
|
|
|
|
|
| |||
Net income (loss) per common share: |
|
|
|
|
|
|
| |||
Basic |
|
$ |
0.12 |
|
$ |
(0.35 |
) |
$ |
0.01 |
|
Diluted |
|
$ |
0.12 |
|
$ |
(0.35 |
) |
$ |
0.01 |
|
|
|
|
|
|
|
|
| |||
Weighted average shares outstanding: |
|
|
|
|
|
|
| |||
Basic |
|
16,927,055 |
|
16,924,189 |
|
16,927,879 |
| |||
Diluted |
|
17,039,296 |
|
16,924,189 |
|
17,149,106 |
|
The accompanying notes are an integral part of these statements.
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF SHAREHOLDERS EQUITY
|
|
|
|
Additional |
|
|
|
|
|
|
| |||||
|
|
Common |
|
Paid-In |
|
Retained |
|
Treasury |
|
|
| |||||
|
|
Stock |
|
Capital |
|
Earnings |
|
Stock |
|
Total |
| |||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
Balance, September 30, 2013 |
|
$ |
18,632 |
|
$ |
49,880,571 |
|
$ |
6,484,634 |
|
$ |
(20,389,590 |
) |
$ |
35,994,247 |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Share-based compensation |
|
|
|
407,391 |
|
|
|
|
|
407,391 |
| |||||
Exercise of stock options |
|
58 |
|
259,505 |
|
|
|
|
|
259,563 |
| |||||
Issuance of stock to directors |
|
25 |
|
150,030 |
|
|
|
|
|
150,055 |
| |||||
Purchase of treasury stock |
|
|
|
|
|
|
|
|
|
|
| |||||
Dividends |
|
|
|
|
|
|
|
|
|
|
| |||||
Net income |
|
|
|
|
|
200,268 |
|
|
|
200,268 |
| |||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
Balance, September 30, 2014 |
|
$ |
18,715 |
|
$ |
50,697,497 |
|
$ |
6,684,902 |
|
$ |
(20,389,590 |
) |
$ |
37,011,524 |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Share-based compensation |
|
|
|
262,314 |
|
|
|
|
|
262,314 |
| |||||
Exercise of stock options |
|
20 |
|
38,980 |
|
|
|
|
|
39,000 |
| |||||
Issuance of stock to directors |
|
21 |
|
149,931 |
|
|
|
|
|
149,952 |
| |||||
Purchase of treasury stock |
|
|
|
|
|
|
|
(254,170 |
) |
(254,170 |
) | |||||
Net (loss) income |
|
|
|
|
|
(5,866,134 |
) |
|
|
(5,866,134 |
) | |||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
Balance, September 30, 2015 |
|
$ |
18,756 |
|
$ |
51,148,722 |
|
$ |
818,768 |
|
$ |
(20,643,760 |
) |
$ |
31,342,486 |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Share-based compensation |
|
|
|
60,272 |
|
|
|
|
|
60,272 |
| |||||
Exercise of stock options |
|
|
|
|
|
|
|
|
|
|
| |||||
Issuance of stock to directors |
|
57 |
|
183,165 |
|
|
|
|
|
183,222 |
| |||||
Purchase of treasury stock |
|
|
|
|
|
|
|
(724,777 |
) |
(724,777 |
) | |||||
Net income |
|
|
|
|
|
1,986,801 |
|
|
|
1,986,801 |
| |||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
Balance, September 30, 2016 |
|
$ |
18,813 |
|
$ |
51,392,159 |
|
$ |
2,805,569 |
|
$ |
(21,368,537 |
) |
$ |
32,848,004 |
|
The accompanying notes are an integral part of these statements.
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
CONSOLIDATED STATEMENTS OF CASH FLOWS
|
|
For the Fiscal Year Ended September 30, |
| |||||||
|
|
2016 |
|
2015 |
|
2014 |
| |||
CASH FLOWS FROM OPERATING ACTIVITIES: |
|
|
|
|
|
|
| |||
Net income (loss) |
|
$ |
1,986,801 |
|
$ |
(5,866,134 |
) |
$ |
200,268 |
|
Adjustments to reconcile net income to net cash provided by (used in) operating activities: |
|
|
|
|
|
|
| |||
Depreciation and amortization |
|
493,361 |
|
570,314 |
|
576,478 |
| |||
Share-based compensation expense |
|
|
|
|
|
|
| |||
Stock options |
|
68,172 |
|
316,369 |
|
660,136 |
| |||
Stock awards |
|
183,222 |
|
149,952 |
|
150,055 |
| |||
Tax adjustment from share-based compensation |
|
(7,899 |
) |
(54,055 |
) |
(252,688 |
) | |||
Provision for (recovery) loss on unbilled receivables |
|
|
|
1,237,841 |
|
3,680,679 |
| |||
(Gain) loss on disposal of property and equipment |
|
3,605 |
|
(61,817 |
) |
78 |
| |||
Excess and obsolete inventory cost |
|
|
|
225,742 |
|
196,205 |
| |||
Deferred income taxes |
|
494,016 |
|
2,743,616 |
|
(648,456 |
) | |||
(Increase) decrease in: |
|
|
|
|
|
|
| |||
Accounts receivable |
|
(2,116,941 |
) |
2,025,168 |
|
69,571 |
| |||
Unbilled receivables |
|
2,322,537 |
|
2,267,678 |
|
(4,566,965 |
) | |||
Inventories |
|
951,488 |
|
647,728 |
|
(1,289,478 |
) | |||
Prepaid expenses and other current assets |
|
371,684 |
|
(250,331 |
) |
(107,899 |
) | |||
Other non-current assets |
|
|
|
(75,300 |
) |
105,886 |
| |||
Increase (decrease) in: |
|
|
|
|
|
|
| |||
Accounts payable |
|
67,790 |
|
(966,671 |
) |
30,515 |
| |||
Accrued expenses |
|
(678,623 |
) |
(1,323,609 |
) |
557,222 |
| |||
Income taxes payable |
|
|
|
(415,328 |
) |
(152,608 |
) | |||
Deferred revenue |
|
(577,160 |
) |
230,426 |
|
78,795 |
| |||
Net cash provided (used in) by operating activities |
|
3,562,053 |
|
1,401,589 |
|
(712,206 |
) | |||
|
|
|
|
|
|
|
| |||
CASH FLOWS FROM INVESTING ACTIVITIES: |
|
|
|
|
|
|
| |||
Purchases of property and equipment |
|
(352,762 |
) |
(188,509 |
) |
(719,523 |
) | |||
Proceeds from the sale of property and equipment |
|
1,108 |
|
69,545 |
|
601 |
| |||
Net cash (used in) investing activities |
|
(351,654 |
) |
(118,964 |
) |
(718,922 |
) | |||
|
|
|
|
|
|
|
| |||
CASH FLOWS FROM FINANCING ACTIVITIES: |
|
|
|
|
|
|
| |||
Proceeds from exercise of stock options |
|
|
|
39,000 |
|
259,505 |
| |||
Purchases of treasury stock |
|
(724,777 |
) |
(254,170 |
) |
|
| |||
Net cash (used in) provided by financing activities |
|
(724,777 |
) |
(215,170 |
) |
259,505 |
| |||
|
|
|
|
|
|
|
| |||
Net increase (decrease) in cash and cash equivalents |
|
2,485,622 |
|
1,067,455 |
|
(1,171,623 |
) | |||
Cash and cash equivalents, beginning of year |
|
16,282,039 |
|
15,214,584 |
|
16,386,207 |
| |||
|
|
|
|
|
|
|
| |||
Cash and cash equivalents, end of year |
|
$ |
18,767,661 |
|
$ |
16,282,039 |
|
$ |
15,214,584 |
|
|
|
|
|
|
|
|
| |||
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION |
|
|
|
|
|
|
| |||
Cash paid for income tax |
|
$ |
175,000 |
|
$ |
|
|
$ |
770,000 |
|
Cash received from income tax refund |
|
$ |
364,836 |
|
$ |
|
|
$ |
|
|
The accompanying notes are an integral part of these statements.
INNOVATIVE SOLUTIONS AND SUPPORT, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. Background
Innovative Solutions and Support, Inc. (the Company or IS&S) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, manufactures, sells and services air data equipment, engine display systems, standby equipment, primary flight guidance and cockpit display systems for retrofit applications and original equipment manufacturers (OEMs) and retrofit applications. The Company supplies integrated Flight Management Systems (FMS) and advanced Global Positioning System (GPS) receivers that enable reduced carbon footprint navigation. The Company continues to position itself as a system integrator, which capability provides the Company with the potential to generate more substantive orders over a broader product base. This strategy, as both a manufacturer and integrator, is to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial, commercial air transport, the United States Department of Defense (DoD)/governmental, and foreign military markets. This approach, combined with the Companys industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market, and to achieve cost advantages over products offered by its competitors. Customers include commercial air transport carriers and corporate/general aviation companies, the DoD and its commercial contractors, aircraft operators, aircraft modification centers, and various OEMs.
2. Concentrations
Major Customers and Products
In fiscal 2016, 2015 and 2014, the Company derived 51%, 57% and 59%, respectively, of total sales from five customers, although not all the same customers in each year. Accounts receivable and unbilled receivables related to those top five customers was $1.6 million, $3.5 million, and $7.9 million as at September 30, 2016, 2015 and 2014, respectively.
In fiscal 2016, the three largest customers, Sierra Nevada, Jet2.com and DHL accounted for 13%, 12% and 11 of total revenue, respectively. In fiscal 2015, the two largest customers, Pilatus and Eclipse accounted for 20% and 15% of total sales, respectively. In fiscal 2014, three of the Companys customers, Pilatus, Eclipse and FedEx, accounted for 17%, 14% and 12% of total sales, respectively.
Flat panel sales were 95%, 98% and 88% of total sales in the years ended September 30, 2016, 2015 and 2014, respectively. Sales of air data systems and components were 5%, 2% and 12% of total sales for the years ended September 30, 2016, 2015 and 2014, respectively. Sales to government contractors and agencies accounted for approximately 32%, 30% and 39% of total sales during fiscal years 2016, 2015 and 2014, respectively. The government agency or general contractor typically retains the right to terminate the contract at any time at its convenience. Upon alteration or termination of these contracts, IS&S is typically entitled to an equitable adjustment to the contract price so that it would be compensated for delivered items and allowable costs incurred. Accordingly, because these contracts can be terminated, the Company cannot be assured that its backlog will result in sales.
Major Suppliers
The Company buys several of its components from sole source suppliers. Although there are a limited number of suppliers of particular components, management believes other suppliers could provide similar components on comparable terms.
During fiscal 2016 the Company had one supplier that accounted for 25% of the Companys total inventory related purchases. During fiscal 2015 the Company had one supplier that accounted for 43% of the Companys total inventory related purchases.
Concentration of Credit Risk
Financial instruments that potentially subject the Company to concentration of credit risk consist principally of cash balances and accounts receivable. The Company invests its excess cash where preservation of principal is the major consideration. Cash balances are maintained with two major banks. Balances on deposit with certain money market accounts and operating accounts may exceed the Federal Deposit Insurance Corporation (FDIC) limits. The Companys customer base consists principally of companies within the aviation industry. The Company requests advance payments and/or letters of credit from customers that it considers to be credit risks.
The Company recorded a charge for impairment for unbilled receivables in the amount of $1.3 million in fiscal 2015 and $3.7 million related to the Delta contract as of September 30, 2014, (See Note 5. Unbilled Receivable in Notes to Consolidated Financial Statements).
3. Summary of Significant Accounting Policies
Principles of Consolidation
The consolidated financial statements include the accounts of the Company and its subsidiaries. All inter-company balances and transactions have been eliminated in consolidation.
Use of Estimates
The financial statements of the Company have been prepared in accordance with accounting principles generally accepted in the United States of America, which require management to make estimates and assumptions that affect the amounts reported in the financial statements. Actual results could differ from those estimates. Estimates are used in accounting for, among other items, long term contracts, allowances for doubtful accounts, inventory obsolescence, product warranty cost liabilities, income taxes, engineering and material costs on EDC programs, percentage of completion on EDC contracts, recoverability of long-lived assets and contingencies. Estimates and assumptions are reviewed periodically and the effects of changes, if any, are reflected in the Consolidated Statement of Income in the period they are determined.
Cash and Cash Equivalents
Highly liquid investments purchased with an original maturity of three months or less are classified as cash equivalents. Cash equivalents at September 30, 2016 and 2015 consist of cash on deposit and cash invested in money market funds with financial institutions.
Inventory valuation
Inventories are stated at the lower of cost (first-in, first-out) or market and consist of the following:
|
|
September 30, |
|
September 30, |
| ||
|
|
2016 |
|
2015 |
| ||
Raw materials |
|
$ |
2,966,891 |
|
$ |
3,346,778 |
|
Work-in-process |
|
500,869 |
|
745,311 |
| ||
Finished goods |
|
178,068 |
|
505,227 |
| ||
|
|
$ |
3,645,828 |
|
$ |
4,597,316 |
|
Property and Equipment
Property and equipment are stated at cost. Depreciation is provided using an accelerated method over estimated useful lives of the assets (the lesser of three to seven years or over the lease term), except for the manufacturing facility and the corporate airplane. The building is being depreciated on a straight-line basis over 39 years. During fiscal 2016, no depreciation was provided for the airplane because it had been depreciated to its estimated salvage value. Major additions and improvements are capitalized, while maintenance and repairs that do not improve or extend the life of assets are charged to expense as incurred.
Long-Lived Assets
The Company assesses the impairment of long-lived assets in accordance with Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) Topic 360-10, Property, Plant and Equipment. This statement requires that long-lived assets be reviewed for impairment whenever events or changes in circumstances indicate the carrying amount of an asset may not be recoverable. In addition, long-lived assets to be disposed of should be reported at the lower of the carrying amount or fair value less cost to sell. The Company considers historical performance and future estimated results in its evaluation of potential impairment and then compares the carrying amount of the asset to estimated future cash flows expected to result from use of the asset. If the carrying amount of the asset exceeds the estimated expected undiscounted future cash flows, the Company measures the amount of the impairment by comparing the carrying amount of the asset to its fair value. The estimation of fair value is generally measured by discounting expected future cash flows. No impairment charges were recorded in fiscal years 2016, 2015 or 2014.
Revenue Recognition
The Company enters into sales arrangements with customers that, in general, provide for the Company to design, develop, manufacture, and deliver large flat-panel display systems, flight information computers, and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation, airspeed, altitude, and engine and fuel data measurements. The Companys sales arrangements may include multiple deliverables as defined in FASB ASC Topic 605-25 Multiple-Element Arrangements (ASC Topic 605-25), which typically include design and engineering services, and the production and delivery of the flat panel display and related components. The Company includes any design and engineering development services elements in EDC sales and any functional upgrade and product elements in product sales in the accompanying Consolidated Statement of Income.
To the extent that an arrangement contains software elements that are essential to the functionality of tangible products sold in the arrangement, the Company recognizes revenue for the deliverables in accordance with the guidance included in FASB Accounting Standards Update 2009-14, Revenue Arrangements That Include Software Elements (ASU 2009-14); FASB ASU 2009-13, Multiple-Deliverable Revenue Arrangementsa consensus of the FASB Emerging Issues Task Force (ASU 2009-13); and FASB ASC Topic 605, Revenue Recognition (ASC Topic 605).
To the extent that an arrangement contains software components, which include functional upgrades that the Company sells on a standalone basis and which it has deemed outside the scope of the exception defined by ASU 2009-14, the Company recognizes software revenue in accordance with FASB ASC Topic 985, Software (ASC Topic 985).
Multiple Element Arrangements
The Company identifies all goods and/or services that are to be delivered separately under a sales arrangement and allocates sales to each deliverable (if more than one) based on that deliverables fair value. The Company then considers the appropriate recognition method for each deliverable. The Companys multiple element arrangements can include defined design and development activities and/or functional upgrades, and product sales.
The Company utilizes the selling price hierarchy that has been established by ASU 2009-13, which requires that the selling price for each deliverable be based on vendor-specific objective evidence if available, third-party evidence if vendor-specific objective evidence is not available, or estimated selling price if neither vendor-specific objective evidence nor third-party evidence is available. To the extent that an arrangement includes a deliverable for which estimated selling price is used, the Company determines the best estimate of selling price by applying the same pricing policies and methodologies that it would use to determine the price to sell the deliverable on a standalone basis.
To the extent that an arrangement contains defined design and EDC activities as identified deliverables in addition to products (resulting in a multiple element arrangement), the Company recognizes as EDC sales amounts earned during the design and development phase of the contract following the guidance included in FASB ASC Topic 605-35, Construction-Type and Production-Type Contracts (ASC Topic 605-35) under the percentage of completion method. To the extent that multiple element arrangements include product sales, sales are generally recognized once revenue recognition criteria for the product deliverables have been met based on the provisions of ASC Topic 605.
Single Element Arrangements
Products
To the extent that a single element arrangement provides for product sales and repairs, the Company recognizes sales when revenue recognition criteria for the product deliverables have been met based on the provisions of ASC Topic 605. In addition, the Company also receives orders for equipment and parts, and in general, recognizes revenue upon shipment to customers.
The Company may offer its customers extended warranties for additional fees, which it records as deferred revenue and recognizes as sales on a straight-line basis over the warranty periods.
Engineering Development Contracts
The Company may enter into contracts to perform specified design and EDC services related to its products. The Company recognizes revenue from these arrangements as EDC sales, following the guidance included in ASC Topic 605-35, and considers the nature of these contracts (including term, size of contract, and level of effort) when determining the appropriate accounting treatment for a particular contract. Certain of these contracts are accounted for under the percentage-of-completion method of accounting when the Company determines that progress toward completion is reasonably and reliably estimable, and the contract is long-term in nature. The Company uses the completed contract method for all other contracts. Sales and profit margins under the percentage-of-completion method are recorded based on the ratio of actual costs incurred to total estimated costs expected to be incurred related to the contract under the cost-to-cost method.
The percentage-of-completion method of accounting requires the Company to estimate the profit margin for each individual contract or contract segment and to apply that profit margin on a uniform basis as sales are recorded under the contract. The estimation of profit margin requires the Company to make projections of the total sales to be generated and the total costs that will be incurred under a contract. These projections require the Company to make numerous assumptions and estimates relating to items such as the complexity of design and related development costs, performance of subcontractors, availability and cost of materials, engineering productivity, prototype costs, overhead costs, and capital costs. These contracts sometimes include purchase options for additional quantities and for customer change orders for additional or revised product functionality. Revenues and costs related to profitable purchase options are included in the Companys estimates only when the options are exercised, while revenues and costs related to unprofitable purchase options are included in the Companys estimates when exercise is determined to be probable. Revenues related to change orders are included in profit estimates only if they can be estimated reliably and collectability is reasonably assured. Purchase options and change orders are accounted for either as an integral part of the original contract, or separately, depending upon the nature and value of the item, in the period in which any change order or purchase option becomes effective. Anticipated losses on contracts are recognized in full in the period in which losses become probable and estimable.
Estimates of profit margins for contracts are reviewed by the Company on a quarterly basis. Assuming the initial estimates of revenues and costs under a contract are accurate, the percentage-of-completion method results in the profit margin being recorded evenly as revenue is recognized under the contracts. Changes in these underlying estimates due to revisions in revenue and cost estimates or the exercise of contract options may result in profit margins being recognized unevenly over a contract as such changes are accounted for on a cumulative basis in the period in which the estimates are revised. Significant changes in estimates related to accounting for long-term contracts may have a material effect on the Companys results of operations in the period in which the revised estimates are made. Cumulative catch-up adjustments (loss contracts) if any, resulting from changes in estimates, are included in results of operations and disclosed in the notes to consolidated financial statements.
Customer Service Revenue
The Company enters into sales arrangement with customers for the repair or upgrade of its various products that are not under warranty. The Companys customer service revenue and cost of sales for the fiscal years ended 2016, 2015 and 2014 are as follows:
|
|
For the Fiscal Year Ended September 30, |
| |||||||
|
|
2016 |
|
2015 |
|
2014 |
| |||
|
|
|
|
|
|
|
| |||
Customer Service Sales |
|
$ |
3,597,828 |
|
$ |
2,612,626 |
|
$ |
2,432,675 |
|
Customer Service Cost of Sales |
|
1,271,022 |
|
1,096,332 |
|
1,152,549 |
| |||
Gross Profit |
|
$ |
2,326,806 |
|
$ |
1,516,294 |
|
$ |
1,280,126 |
|
Income Taxes
Income taxes are recorded in accordance with FASB ASC Topic 740, Income Taxes (ASC Topic 740), which utilizes a balance sheet approach to provide for income taxes. Under this method, the Company recognizes deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of the Companys assets, liabilities, and expected benefits of utilizing net operating loss (NOL) and tax credit carry-forwards. The impact on deferred taxes of changes in tax rates and laws, if any, are applied to the years during which temporary differences are expected to be settled and are reflected in the consolidated financial statements in the period of enactment.
Deferred tax assets are reduced by a valuation allowance if, based on the consideration of all available evidence, it is more likely than not that some portion of the deferred tax asset will not be realized. Significant weight is given to evidence that can be verified objectively, and significant management judgment is required in determining any valuation allowance recorded against net deferred tax assets. The Company evaluates deferred income taxes on a quarterly basis to determine if a valuation allowance is required by considering available evidence. Deferred tax assets are recognized when expected future taxable income is sufficient to allow the related tax benefits to reduce taxes that would otherwise be payable. The sources of taxable income that may be available to realize the benefit of deferred tax assets are future reversals of existing taxable temporary differences, future taxable income exclusive of reversing temporary differences and credit carryforwards, taxable income in carryback years, and tax planning strategies which are both prudent and feasible. The Companys current balance of the deferred tax valuation allowance is recorded against the majority of its federal and state deferred tax assets. The remaining amount of the deferred tax assets recognized are attributable to tax planning strategies and the ability to carryback federal tax losses to claim a tax refund. The Company will continue to assess all available evidence during future periods to evaluate any changes to the realization of its deferred tax assets. If the Company were to determine that it would be able to realize additional federal or state deferred tax assets in the future, it would make an adjustment to the valuation allowance which would reduce the provision for income taxes.
The accounting for uncertainty in income taxes requires a more likely than not threshold for financial statement recognition and measurement of tax positions taken or expected to be taken in a tax return. The Company records a liability for the difference between the (i) benefit recognized and measured for financial statement purposes and (ii) the tax position taken or expected to be taken on the Companys tax return. To the extent that the Companys assessment of such tax positions changes, the change in estimate is recorded in the period in which the determination is made. The Company has elected to record any interest or penalties associated with uncertain tax positions as income tax expense.
The Company files a consolidated United States federal income tax return. The Company prepares and files tax returns based on the interpretation of tax laws and regulations, and records estimates based on these judgments and interpretations. In the normal course of business, the tax returns are subject to examination by various taxing authorities. Such examinations may result in future tax and interest assessments by these taxing authorities, and the Company records a liability when it is probable that there will be an assessment. The Company adjusts the estimates periodically as a result of ongoing examinations by and settlements with the various taxing authorities, and changes in tax laws, regulations and precedent. The consolidated tax provision of any given year includes adjustments to prior years income tax accruals that are considered appropriate, and any related estimated interest. Management believes that it has made adequate accruals for income taxes. Differences between estimated and actual amounts determined upon ultimate resolution, individually or in the aggregate, are not expected to have a material effect on the Companys consolidated financial position, but could possibly be material to its consolidated results of operations or cash flow of any one period.
Engineering Development
Total engineering development expense is comprised of both internally funded research and development (R&D) and product development and design charges related to specific customer EDC. Engineering development expense consists primarily of payroll-related expenses of employees engaged in EDC, engineering related product materials and equipment, and subcontracting costs. R&D charges incurred for product design, product enhancements and future product development are expensed as incurred. Product development and design charges related to specific customer EDC are charged to cost of sales.
Comprehensive Income
Pursuant to FASB ASC Topic 220, Comprehensive Income (ASC Topic 220), the Company is required to classify items of other comprehensive income by their nature in a financial statement and display the accumulated balance of other comprehensive income separately from retained earnings and additional paid-in capital in the equity section of its condensed consolidated balance sheets. For fiscal 2016, 2015 and 2014 comprehensive income consisted of net income only, and there were no items of other comprehensive income for any of the periods presented.
Fair Value of Financial Instruments
The net carrying amounts of cash and cash equivalents, accounts receivable, accounts payable and short-term debt approximate their fair value because of the short-term nature of these instruments. For financial assets and liabilities measured at fair value on a recurring basis, fair value is the price the Company would receive to sell an asset or pay to transfer a liability in an orderly transaction with a market participant at the measurement date. A three-level fair value hierarchy prioritizes the inputs used to measure fair value as follows:
Level 1 Unadjusted quoted prices that are available in active markets for the identical assets or liabilities at the measurement date.
Level 2 Other observable inputs available at the measurement date, other than quoted prices included in Level 1, either directly or indirectly, including:
· Quoted prices for similar assets or liabilities in active markets;
· Quoted prices for identical or similar assets in non-active markets;
· Inputs other than quoted prices that are observable for the asset or liability; and
· Inputs that are derived principally from or corroborated by other observable market data.
Level 3 Unobservable inputs that cannot be corroborated by observable market data and reflect the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize managements estimates of market participant assumptions.
The following table sets forth by level within the fair value hierarchy the Companys financial assets and liabilities that were accounted for at fair value on a recurring basis as of September 30, 2016 and 2015, according to the valuation techniques the Company used to determine their fair values.
|
|
Fair Value Measurement on September 30, 2016 |
| |||||||
|
|
Quoted Price in |
|
Significant Other |
|
Significant |
| |||
|
|
Active Markets for |
|
Observable |
|
Unobservable |
| |||
|
|
Identical Assets |
|
Inputs |
|
Inputs |
| |||
|
|
(Level 1) |
|
(Level 2) |
|
(Level 3) |
| |||
Assets |
|
|
|
|
|
|