Q3 2013 Form 10-Q
Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549 
 
 
FORM 10-Q
 
 
 
(Mark One)
ý
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 30, 2013
or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from              to            
Commission file number: 001-34180
 
 
FLUIDIGM CORPORATION
(Exact name of registrant as specified in its charter)
 
 
Delaware
 
77-0513190
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification Number)
7000 Shoreline Court, Suite 100
South San Francisco, California 94080
(Address of principal executive offices) (Zip Code)
(650) 266-6000
(Registrant’s telephone number, including area code)
 
 
 
     Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ý    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ý    No  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
 
¨
  
Accelerated filer
 
ý
 
 
 
 
Non-accelerated filer
 
¨  (Do not check if a smaller reporting company)
  
Smaller reporting company
 
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  ý
As of October 31, 2013, there were 25,613,547 shares of the Registrant’s common stock outstanding.


Table of Contents

FLUIDIGM CORPORATION
TABLE OF CONTENTS
 
 
Page
PART I.
 
 
 
 
Item 1.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Item 2.
 
 
 
Item 3.
 
 
 
Item 4.
 
 
 
PART II.
 
 
 
 
Item 1.
 
 
 
Item 1A.
 
 
 
Item 2.
 
 
 
Item 6.
 
 
 
 


Table of Contents

PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
FLUIDIGM CORPORATION
CONDENSED CONSOLIDATED BALANCE SHEETS
(In thousands, except per share amounts)
 
 
 
September 30,
2013
 
December 31,
2012
 
 
(Unaudited)
 
(Note 2)
ASSETS
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
20,099

 
$
58,649

Short-term investments
 
43,580

 
21,362

Accounts receivable (net of allowances of $32 and $448 at September 30, 2013 and December 31, 2012, respectively)
 
12,413

 
12,900

Inventories
 
8,021

 
7,169

Prepaid expenses and other current assets
 
2,545

 
1,131

Total current assets
 
86,658

 
101,211

Long-term investments
 
19,140

 
3,666

Property and equipment, net
 
5,155

 
4,974

Other non-current assets
 
3,288

 
3,881

Total assets
 
$
114,241

 
$
113,732

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
 
Current liabilities:
 
 
 
 
Accounts payable
 
$
3,406

 
$
2,555

Accrued compensation and related benefits
 
3,713

 
2,877

Other accrued liabilities
 
5,117

 
4,279

Deferred revenue, current portion
 
2,807

 
1,886

Total current liabilities
 
15,043

 
11,597

Deferred revenue, net of current portion
 
1,824

 
1,241

Other non-current liabilities
 
362

 
237

Total liabilities
 
17,229

 
13,075

Commitments and contingencies
 


 


Stockholders’ equity:
 
 
 
 
Preferred stock, $0.001 par value, 10,000 shares authorized, no shares issued and outstanding at September 30, 2013 and December 31, 2012, respectively
 

 

Common stock: $0.001 par value, 200,000 shares authorized at September 30, 2013 and December 31, 2012; 25,591 and 25,115 shares issued and outstanding as of September 30, 2013 and December 31, 2012, respectively
 
26

 
25

Additional paid-in capital
 
350,403

 
342,222

Accumulated other comprehensive loss
 
(713
)
 
(769
)
Accumulated deficit
 
(252,704
)
 
(240,821
)
Total stockholders’ equity
 
97,012

 
100,657

Total liabilities and stockholders’ equity
 
$
114,241

 
$
113,732

See accompanying notes.

3

Table of Contents

FLUIDIGM CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS
(In thousands, except per share amounts)
(Unaudited)
 
 
 
Three Months Ended September 30,
 
Nine Months Ended September 30,
 
 
2013
 
2012
 
2013
 
2012
Revenue:
 
 
 
 
 
 
 
 
Product revenue
 
$
18,045

 
$
12,602

 
$
49,566

 
$
36,126

License revenue
 
78

 
15

 
242

 
53

Grant revenue
 
164

 
165

 
494

 
496

Total revenue
 
18,287

 
12,782

 
50,302

 
36,675

Costs and expenses:
 
 
 
 
 
 
 
 
Cost of product revenue
 
5,138

 
3,518

 
14,273

 
10,990

Research and development
 
5,004

 
4,071

 
14,198

 
12,337

Selling, general and administrative
 
12,097

 
9,102

 
34,840

 
27,926

Litigation settlement
 
1,000

 

 
1,000

 

Total costs and expenses
 
23,239

 
16,691

 
64,311

 
51,253

Loss from operations
 
(4,952
)
 
(3,909
)
 
(14,009
)
 
(14,578
)
Gain from sale of investment in Verinata
 

 

 
1,777

 

Interest expense
 
(1
)
 
(107
)
 
(13
)
 
(616
)
Other income (expense), net
 
709

 
(75
)
 
457

 
(127
)
Loss before income taxes
 
(4,244
)
 
(4,091
)
 
(11,788
)
 
(15,321
)
Provision for income taxes
 
(42
)
 
(61
)
 
(95
)
 
(101
)
Net loss
 
$
(4,286
)
 
$
(4,152
)
 
$
(11,883
)
 
$
(15,422
)
Net loss per share, basic and diluted
 
$
(0.17
)
 
$
(0.18
)
 
$
(0.47
)
 
$
(0.73
)
Shares used in computing net loss per share, basic and diluted
 
25,534

 
22,544

 
25,407

 
21,161

Comprehensive loss
 
$
(4,204
)
 
$
(4,144
)
 
$
(11,827
)
 
$
(15,442
)
See accompanying notes.

4

Table of Contents

FLUIDIGM CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(Unaudited)
 
 
 
Nine Months Ended September 30,
 
 
2013
 
2012
Operating activities
 
 
 
 
Net loss
 
$
(11,883
)
 
$
(15,422
)
Adjustments to reconcile net loss to net cash used in operating activities:
 
 
 
 
Depreciation and amortization
 
1,850

 
1,592

Stock-based compensation expense
 
4,681

 
3,047

Gain from sale of investment in Verinata
 
(1,777
)
 

Other non-cash items
 
29

 
26

Changes in assets and liabilities:
 
 
 
 
Accounts receivable
 
572

 
(1,451
)
Inventories
 
(1,344
)
 
(1,553
)
Prepaid expenses and other assets
 
(1,411
)
 
(175
)
Accounts payable
 
1,150

 
(978
)
Deferred revenue
 
1,652

 
502

Other liabilities
 
1,652

 
433

Net cash used in operating activities
 
(4,829
)
 
(13,979
)
Investing activities
 
 
 
 
Purchases of investments
 
(56,831
)
 
(27,705
)
Proceeds from sales and maturities of investments
 
19,140

 
45,770

Proceeds from sale of investment in Verinata
 
3,117

 

Purchase of intangible assets
 
(1,043
)
 

Purchases of property and equipment
 
(1,565
)
 
(1,621
)
Net cash (used in) provided by investing activities
 
(37,182
)
 
16,444

Financing activities
 
 
 
 
Proceeds from issuance of common stock, net of issuance costs
 

 
56,143

Proceeds from exercise of stock options
 
3,501

 
2,125

Repayment of long-term debt
 

 
(10,190
)
Proceeds from line of credit
 

 
1,875

Net cash provided by financing activities
 
3,501

 
49,953

Effect of foreign exchange rate fluctuations on cash and cash equivalents
 
(40
)
 
40

Net (decrease) increase in cash and cash equivalents
 
(38,550
)
 
52,458

Cash and cash equivalents at beginning of period
 
58,649

 
13,553

Cash and cash equivalents at end of period
 
$
20,099

 
$
66,011

See accompanying notes.

5

Table of Contents

FLUIDIGM CORPORATION
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
 
1. Description of Business
Fluidigm Corporation (we, our, or us) was incorporated in the State of California in May 1999 to commercialize microfluidic technology initially developed at the California Institute of Technology. In July 2007, we were reincorporated in Delaware. Our headquarters are located in South San Francisco, California. We develop, manufacture, and market microfluidic systems to academic institutions, clinical laboratories, and pharmaceutical, biotechnology, and agricultural biotechnology (Ag-Bio) companies in growth markets, such as single-cell genomics, applied genotyping, and sample preparation for targeted resequencing. Our proprietary microfluidic systems consist of instruments and consumables, including integrated fluidic circuits (IFCs) for nucleic acid analysis, and three families of assay chemistries. These systems are designed to simplify experimental workflow, increase throughput, reduce costs, and provide quality data.
 
2. Summary of Significant Accounting Policies
Basis of Presentation
The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles (U.S. GAAP) and following the requirements of the Securities and Exchange Commission (SEC) for interim reporting. As permitted under those rules, certain footnotes or other financial information that are normally required by U.S. GAAP have been condensed or omitted, and accordingly the balance sheet as of December 31, 2012 has been derived from audited consolidated financial statements at that date but does not include all of the information required by U.S. GAAP for complete financial statements. These financial statements have been prepared on the same basis as our annual financial statements and, in the opinion of management, reflect all adjustments (consisting only of normal recurring adjustments) that are necessary for a fair presentation of our financial information. The results of operations for the three and nine months ended September 30, 2013 are not necessarily indicative of the results to be expected for the year ending December 31, 2013 or for any other interim period or for any other future year.
The preparation of these condensed consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses, and related disclosures. On an ongoing basis, we evaluate our estimates, including critical accounting policies or estimates related to revenue recognition, income tax provisions, stock-based compensation, inventory valuation, and allowances for doubtful accounts. We base our estimates on historical experience and on various relevant assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ significantly from these estimates.
The accompanying condensed consolidated financial statements and related financial information should be read in conjunction with the audited consolidated financial statements and the related notes thereto for the year ended December 31, 2012 included in our Annual Report on Form 10-K filed with the SEC.
Reclassifications
Certain items previously reported in the condensed consolidated statement of cash flows have been reclassified to conform to the current period presentation. Such reclassifications do not impact previously reported net cash used in operating activities, net cash provided by investing activities, net cash used in financing activities, or the net decrease in cash and cash equivalents.

Secondary Offering
On August 21, 2012, we closed an underwritten public offering of 4,209,000 shares of our common stock and received cash proceeds of approximately $56.1 million, net of underwriting discounts, commissions and offering expenses. The shares were issued pursuant to a registration statement on Form S-3 declared effective by the SEC on May 10, 2012.
Net Loss per Share
Our basic and diluted net loss per share is calculated by dividing net loss by the weighted-average number of shares of common stock outstanding for the period. Our options to purchase common stock are considered to be potentially dilutive common shares but have been excluded from the calculation of diluted net loss per share as their effect is anti-dilutive.


 

6

Table of Contents
FLUIDIGM CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(unaudited)


The following potentially dilutive common shares were excluded from the computation of diluted net loss per share for the interim periods presented because including them would have been anti-dilutive (in thousands):
 
 
 
Three Months Ended September 30,
 
Nine Months Ended September 30,
 
 
2013
 
2012
 
2013
 
2012
Options to purchase common stock
 
3,631

 
3,013

 
3,631

 
3,013

Comprehensive Loss
The following is a summary of comprehensive loss (in thousands):
 
 
 
Three Months Ended September 30,
 
Nine Months Ended September 30,
 
 
2013
 
2012
 
2013
 
2012
Net loss
 
$
(4,286
)
 
$
(4,152
)
 
$
(11,883
)
 
$
(15,422
)
Other comprehensive (loss) income
 
82

 
8

 
56

 
(20
)
Comprehensive loss
 
$
(4,204
)
 
$
(4,144
)
 
$
(11,827
)
 
$
(15,442
)
Comprehensive loss is comprised of net loss, unrealized gains and losses on our investments, and foreign currency translation adjustments.
Investment, at Cost
At December 31, 2012, we had a minority equity investment in Verinata Health, Inc. (Verinata), a privately-held company, that was included in other non-current assets and accounted for under the cost method of accounting. Under the cost method of accounting, the investment was carried at cost and adjusted only for other than temporary declines in value. No such declines were identified and the carrying value of the investment at December 31, 2012 was $1.3 million.
In February 2013, Illumina, Inc. acquired Verinata for $350 million in cash and up to an additional $100 million in milestone payments through 2015. In March 2013, we received cash proceeds of $3.1 million in exchange for our ownership interest in Verinata, resulting in a gain of $1.8 million. If the milestone payments become payable in the future, we could receive up to $3.2 million in additional proceeds.
Intangible Assets Acquisition
On June 28, 2013, we acquired certain patents, patent applications, and licenses from Helicos Biosciences Corporation (Helicos) relating to Helicos’ next-generation sequencing technology. The rights acquired by us are subject to certain licenses and sublicenses granted by Helicos prior to or contemporaneously with our acquisition. The assets were acquired for $1.0 million and, as of September 30, 2013, we had incurred transaction costs of approximately $0.3 million. The patents, patent applications, and licenses have an alternative future use and, as a result, the acquired assets and transaction costs are capitalized as intangible assets and are included in other non-current assets. The acquired assets will be amortized to research and development expense over their useful life of ten years.
Legal Matters
From time to time, we may be subject to various legal proceedings and claims arising in the ordinary course of business. We assess contingencies to determine the degree of probability and range of possible loss for potential accrual in our financial statements. An estimated loss contingency is accrued in the financial statements if it is probable that a liability has been incurred and the amount of the loss can be reasonably estimated.
Pursuant to the terms of a patent cross license agreement with Applied Biosystems, LLC (now part of Life Technologies Corporation, or Life), we are obligated to make a $1.0 million payment to Life upon satisfaction of certain conditions. We do not believe that the conditions triggering the payment obligation have been met; however, on October 16, 2013, Life provided notice that the $1.0 million payment is due and payable under the license agreement. We intend to dispute Life’s claim to the contingent payment, but it is probable that we will make the payment while reserving our rights to dispute the obligation. Among other reasons, we would make the payment to avoid what would be, in our view, an improper termination of our license to certain Life patent filings under the agreement, which could subject our relevant product lines to risks associated with patent

7

Table of Contents
FLUIDIGM CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(unaudited)


infringement litigation.  As we believe that making the disputed payment is probable, we accrued a loss contingency of $1.0 million in the three months ended September 30, 2013.
On November 6, 2012, we filed a complaint against NanoString Technologies, Inc., or NanoString, in the United States District Court in the Northern District of California (Civil Action No. 12-5712), alleging claims of false advertising, unfair competition, and unlawful trade practice in violation of the Lanham Act and corresponding sections of the California Business & Professions Code. Our complaint sought to enjoin NanoString from continuing to make or disseminate any of the false and misleading claims, misrepresenting and/or exaggerating the performance of its product in comparison with our BioMark System, to require NanoString to retract, remove, or correct the false and misleading advertising claims, and to recover damages and other relief for harm caused to us by NanoString. In addition, we filed a lawsuit on April 5, 2013 in Singapore against NanoString alleging malicious falsehood in advertising and trademark infringement. On September 30, 2013, we and NanoString agreed to settle the lawsuits. The terms of the settlement require NanoString to, among other things, pay us $0.6 million, remove all references - from its marketing materials, website, and promotional activities - to a single-cell comparison study comparing Fluidigm and NanoString single-cell products, as well as recall and destroy all materials related to and/or based on the study. The case brought in the United States District Court in the Northern District of California was dismissed on October 22, 2013, and the case brought in Singapore was discontinued on October 29, 2013.
Recent Accounting Pronouncement
In June 2013, the Financial Accounting Standards Board ratified Emerging Issues Task Force (EITF) Issue 13-C, “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists” which concludes an unrecognized tax benefit should be presented as a reduction of a deferred tax asset when settlement in this manner is available under the tax law.  This guidance is effective for our interim and annual periods beginning January 1, 2014. We do not believe the adoption of this guidance will have a material impact on our consolidated financial statements.


8

Table of Contents
FLUIDIGM CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(unaudited)


3. Inventories
Inventories consist of the following (in thousands):
 
 
 
September 30, 2013
 
December 31,
2012
Raw materials
 
$
2,536

 
$
2,846

Work-in-process
 
1,803

 
1,369

Finished goods
 
3,682

 
2,954

 
 
$
8,021

 
$
7,169

 
4. Fair Value of Financial Instruments
As a basis for considering fair value, we follow a three-tier value hierarchy, which prioritizes the inputs used in measuring fair value as follows:
Level I: observable inputs such as quoted prices in active markets;
Level II: inputs other than quoted prices in active markets that are observable either directly or indirectly; and
Level III: unobservable inputs in which there is little or no market data, which requires us to develop our own assumptions.
Our cash equivalents are classified as Level I because they are valued using quoted market prices. Our U.S. government and agency securities are classified as Level II because the inputs to these valuations are derived from or corroborated by observable market data. Depending on the security, the income and market approaches are used in the model driven valuations. Inputs into these models include recently executed transaction prices for our investment securities or the securities of comparable issuers and yield curves.
The following table sets forth our financial instruments that were measured at fair value by level within the fair value hierarchy (in thousands):
 
 
 
September 30, 2013
 
December 31, 2012
 
 
Level I
 
Level II
 
Level III
 
Total
 
Level I
 
Level II
 
Level III
 
Total
Assets
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Money market funds
 
$
5,802

 
$

 
$

 
$
5,802

 
$
17

 
$

 
$

 
$
17

U.S. government and agency securities
 

 
62,720

 

 
62,720

 

 
26,579

 

 
26,579

Total assets measured at fair value
 
$
5,802

 
$
62,720


$


$
68,522


$
17


$
26,579


$


$
26,596

The following is a summary of our U.S. government and agency securities at September 30, 2013 (in thousands):
 
 
 
Amortized
Cost
 
Gross
Unrealized
Gain
 
Gross
Unrealized
Loss
 
Estimated
Fair Value
U.S. government and agency securities
 
$
62,693

 
$
30

 
$
(3
)
 
$
62,720


 
The contractual maturity dates of $43.6 million of our U.S. government and agency securities are within one year from September 30, 2013. The contractual maturity dates of our remaining U.S. government and agency securities are less than eighteen months from September 30, 2013.

9

Table of Contents
FLUIDIGM CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(unaudited)


The following is a summary of our cash and cash equivalents (in thousands):
 
 
 
September 30, 2013
 
December 31,
2012
Cash
 
$
14,297

 
$
57,082

U.S. government and agency security
 

 
1,550

Money market funds
 
5,802

 
17

Cash and cash equivalents
 
$
20,099

 
$
58,649

 
5. Long-Term Debt
We entered into a long-term loan agreement in March 2005 (as amended, the Loan Agreement). Commencing in March 2011, we made principal and interest payments of $0.6 million per month and, as required under the Loan Agreement, we made an additional principal payment of $2.3 million in March 2012. Using the effective interest method, a majority of the March 2012 payment was accrued as interest expense in periods prior to 2010 with the remainder being recognized through the extended maturity date of February 2013. In June 2012, we elected to make another principal payment in the amount of $1.9 million using proceeds from our Line of Credit (see Note 6). During the three months ended September 30, 2012, we paid the remaining balance due and the Loan Agreement was terminated.
 
6. Line of Credit
In December 2010, we entered into a two-year bank line of credit agreement (as amended, the Line of Credit) that provided us with the ability to borrow up to $7.0 million, subject to certain covenants and other restrictions, and bore interest at a rate equal to the greater of (i) 4.25% or (ii) the prime rate plus 1.00% per year. In December 2012, the Line of Credit was amended to extend the term for an additional two years and provide us with the ability to borrow up to $10.0 million, of which $6.0 million is available on a non-formula basis, subject to certain covenants and other restrictions. The balance of $4.0 million is available based on eligible receivables. The Line of Credit is collateralized by our assets, excluding our intellectual property, and bears interest at a rate equal to the greater of (i) 3.75% or (ii) the prime rate plus 0.50% per year. At September 30, 2013, there was no outstanding balance on the Line of Credit and we were in compliance with all applicable covenants.
 
7. Commitments and Contingencies
On April 9, 2013, we entered into an amendment (the Amendment) to the lease agreement dated September 4, 2010 (as amended, the Lease) relating to the lease of office and laboratory space at our headquarters located at 7000 Shoreline Court, South San Francisco, California. The Amendment provides for an expansion of the premises covered under the Lease to include space that is currently being subleased by us from a third party through March 31, 2014; an extension of the term of the Lease to April 30, 2020 with an option to renew for an additional five years; payment of base rent with rent escalation; and payment of certain operating expenses during the term of the Lease. The Amendment also provides for an allowance of approximately $0.7 million for tenant improvements, which, to the extent not used by March 31, 2015, will be used to offset base rent obligations, and an additional allowance of approximately $0.5 million for tenant improvements, which, if used, will be repaid in equal monthly payments with interest at a rate of 9% per annum over the remaining term of the Lease.

8. Stock-Based Compensation
During the three months ended September 30, 2013, we granted to certain employees options to purchase 18,000 shares of common stock with exercise prices ranging from $17.76 to $21.94 per share. During the nine months ended September 30, 2013, we granted to certain employees options to purchase 1,229,000 shares of common stock with exercise prices ranging from $15.27 to $21.94 per share. These options had a total grant date fair value of $11.3 million that will be recognized as expense over their respective 4-year vesting periods.
We recognized stock-based compensation expense of $1.7 million and $1.0 million during the three months ended September 30, 2013 and 2012, respectively. During the nine months ended September 30, 2013 and 2012, we recognized stock-based compensation of $4.7 million and $3.0 million, respectively. As of September 30, 2013, we had $16.6 million of unrecognized stock-based compensation costs, which are expected to be recognized over a weighted average period of 2.7 years.
 


10

Table of Contents
FLUIDIGM CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS—(Continued)
(unaudited)


9. Income Taxes
Income taxes are primarily comprised of state and foreign income taxes. The provision or benefit for income taxes for the periods presented differs from the 34% U.S. Federal statutory rate primarily due to maintaining a valuation allowance for U.S. losses and tax assets, which we do not consider to be realizable. Income tax expense primarily consists of amounts payable in foreign jurisdictions.
 
10. Information About Geographic Areas
We operate in one reporting segment, which is the development, manufacturing and commercialization of microfluidic systems consisting of instruments and consumables, including IFCs for nucleic acid analysis and three families of assay chemistries, for academic institutions, clinical laboratories, and pharmaceutical, biotechnology, and Ag-Bio companies in growth markets, such as single-cell genomics, applied genotyping, and sample preparation for targeted resequencing.
The following table presents product revenue by geography based on the billing address of our customers for each period presented (in thousands):
 
 
 
Three Months Ended September 30,
 
Nine Months Ended September 30,
 
 
2013
 
2012
 
2013
 
2012
United States
 
$
10,145

 
$
7,757

 
$
27,213

 
$
20,024

Europe
 
3,962

 
2,678

 
11,899

 
8,088

Japan
 
2,620

 
774

 
4,504

 
2,763

Asia-Pacific
 
897

 
1,267

 
4,375

 
4,484

Other
 
421

 
126

 
1,575

 
767

Total
 
$
18,045

 
$
12,602

 
$
49,566

 
$
36,126

Our license and grant revenues are primarily generated in the United States.

11. Subsequent Event
On October 14, 2013, Fluidigm Singapore Pte Ltd. (Fluidigm Singapore), our wholly-owned subsidiary, accepted an offer of tenancy (the Lease) from HSBC Institutional Trust Services (Singapore) Limited, as trustee of Ascendas Real Estate Investment Trust (the Landlord), relating to the lease of a facility located at Block 5008, Ang Mo Kio Avenue 5, TECHplace II, Singapore 569874. Pursuant to the terms of the Lease, it is expected that Fluidigm Singapore will be in possession of the facility commencing on March 2, 2014 for a term of 99 months. Aggregate gross rent (including service charges) due under the Lease will be SG$6.4 million (approximately US$5.1 million using the October 14, 2013 exchange rate). The Lease also provides Fluidigm Singapore with an option to renew the Lease for an additional 60 months at the then prevailing market rent, and on similar terms as the existing Lease, and a right of first refusal on certain additional space in the building beginning June 2, 2014 until June 1, 2015. We are currently evaluating the accounting for the Lease.


11

Table of Contents


Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
The following discussion and analysis should be read together with our condensed consolidated financial statements and the notes to those statements included elsewhere in this Form 10-Q. This Form 10-Q contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, or Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, or Exchange Act, that are based on our management’s beliefs and assumptions and on information currently available to our management. The forward-looking statements are contained principally in the section entitled “Risk Factors” and this Management’s Discussion and Analysis of Financial Condition and Results of Operations. Forward-looking statements include information concerning our possible or assumed future cash flow, revenue, sources of revenue and results of operations, operating and other expenses, unit sales, business strategies, financing plans, expansion of our business, competitive position, industry environment, potential growth opportunities, and the effects of competition. Forward-looking statements include statements that are not historical facts and can be identified by terms such as “anticipates,” “believes,” “could,” “seeks,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “will,” “would,” or similar expressions and the negatives of those terms.
Forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause our actual results, performance, or achievements to be materially different from any future results, performance, or achievements expressed or implied by the forward-looking statements. We discuss these risks in greater detail in Part II, Item 1A, “Risk Factors,” elsewhere in this Form 10-Q, and in our Annual Report on Form 10-K filed with the Securities and Exchange Commission, or SEC. Given these uncertainties, you should not place undue reliance on these forward-looking statements. Also, forward-looking statements represent our management’s beliefs and assumptions only as of the date of this Form 10-Q.
Except as required by law, we assume no obligation to update these forward-looking statements, or to update the reasons actual results could differ materially from those anticipated in these forward-looking statements, even if new information becomes available in the future. You should read this Form 10-Q completely and with the understanding that our actual future results may be materially different from what we expect.
“Fluidigm,” the Fluidigm logo, “BioMark,” “Access Array,” “C1,” “EP1,” “SNPtype,” and “DELTAgene” are trademarks or registered trademarks of Fluidigm Corporation. Other service marks, trademarks, and trade names referred to in this Form 10-Q are the property of their respective owners.
In this Form 10-Q, “we,” “us” and “our” refer to Fluidigm Corporation and its subsidiaries.
Overview
We develop, manufacture, and market microfluidic systems to leading academic institutions, clinical laboratories, and pharmaceutical, biotechnology, and agricultural biotechnology, or Ag-Bio, companies in growth markets, such as single-cell genomics, applied genotyping, and sample preparation for targeted resequencing. Our proprietary microfluidic systems consist of instruments and consumables, including integrated fluidic circuits, or IFCs, assays, and reagents. We actively market four microfluidic systems, including 17 different commercial IFCs for nucleic acid analysis, and three families of assay chemistries. Our systems are designed to significantly simplify experimental workflow, increase throughput, and reduce costs, while providing excellent data quality. In addition, our proprietary technology enables genetic analysis that in many instances was previously impractical. We have sold over 870 systems to customers in over 30 countries worldwide.
We have launched several product lines, including our BioMark System for gene expression analysis, genotyping, and digital polymerase chain reaction, or digital PCR, in 2006; our EP1 System for single nucleotide polymorphism, or SNP, genotyping, and digital PCR in 2008; our Access Array System for target enrichment in 2009; our BioMark HD System for high-throughput gene expression analysis, targeted single-cell gene expression analysis, SNP genotyping, and digital PCR in 2011; and our C1 Single-Cell Auto Prep System for single-cell sample preparation in June 2012. In addition, in May 2011, we launched assay products, including our DELTAgene assays for gene expression; our SNPtype assays for SNP genotyping; and our Access Array Target-Specific primers for targeted next-generation DNA sequencing. Our systems utilize one or more IFCs designed for particular applications and include specialized instrumentation and software, as well as assays and other reagents for certain applications.
We distribute our microfluidic systems through our direct sales force and support organizations located in North America, Europe, and Asia-Pacific, and through distributors or sales agents in several European, Latin American, Middle Eastern, and Asia-Pacific countries. Our manufacturing operations are primarily located in Singapore. Our facility in Singapore manufactures our instruments, several of which are assembled at facilities of our contract manufacturers in Singapore, with testing and calibration of the assembled products performed at our Singapore facility. All of our IFCs for commercial sale and some IFCs for our research and development purposes are fabricated at our Singapore facility. Our South San Francisco facility fabricates IFCs for our research and development purposes, and manufactures our assays and produces other reagents for commercial sale.

12

Table of Contents

Our total revenue grew from $33.6 million in 2010 to $52.3 million in 2012, and for the nine months ended September 30, 2013, our total revenue was $50.3 million. We have incurred significant net losses since our inception in 1999 and, as of September 30, 2013, our accumulated deficit was $252.7 million.
Critical Accounting Policies, Significant Judgments and Estimates
Our condensed consolidated financial statements and the related notes included elsewhere in this Form 10-Q are prepared in accordance with accounting principles generally accepted in the United States. The preparation of these condensed consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs, and expenses and related disclosures. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Changes in accounting estimates may occur from period to period. Accordingly, actual results could differ significantly from the estimates made by our management. We evaluate our estimates and assumptions on an ongoing basis. To the extent there are material differences between these estimates and actual results, our future financial statement presentation, financial condition, results of operations, and cash flows will be affected.
There have been no material changes in our critical accounting policies and estimates in the preparation of our condensed consolidated financial statements during the three and nine months ended September 30, 2013 compared to those disclosed in our Annual Report on Form 10-K for the year ended December 31, 2012, as filed with the SEC on March 12, 2013.
Results of Operations
Revenue
We generate revenue from sales of our products, license agreements, and government grants. Our product revenue consists of sales of instruments and related services, and consumables, including IFCs, assays, and other reagents. We have entered into license agreements and have received government grants to conduct research and development activities.
The following table presents our revenue by source for each period presented (in thousands):
 
 
 
Three Months Ended 
 September 30,
 
Nine Months Ended 
 September 30,
 
 
2013
 
2012
 
2013
 
2012
Revenue:
 
 
 
 
 
 
 
 
Instruments
 
$
10,894

 
$
6,750

 
$
28,964

 
$
19,548

Consumables
 
7,151

 
5,852

 
20,602

 
16,578

Product revenue
 
18,045

 
12,602


49,566


36,126

License revenue
 
78

 
15

 
242

 
53

Grant revenue
 
164

 
165

 
494

 
496

Total revenue
 
$
18,287

 
$
12,782


$
50,302


$
36,675

The following table presents our product revenue by geography and as a percentage of total product revenue by geography based on the billing address of our customers for each period presented (in thousands):
 
 
 
Three Months Ended September 30,
 
Nine Months Ended September 30,
 
 
2013
 
2012
 
2013
 
2012
United States
 
$
10,145

 
56
%
 
$
7,757

 
62
%
 
$
27,213

 
55
%
 
$
20,024

 
55
%
Europe
 
3,962

 
22
%
 
2,678

 
21
%
 
11,899

 
24
%
 
8,088

 
23
%
Japan
 
2,620

 
15
%
 
774

 
6
%
 
4,504

 
9
%
 
2,763

 
8
%
Asia-Pacific
 
897

 
5
%
 
1,267

 
10
%
 
4,375

 
9
%
 
4,484

 
12
%
Other
 
421

 
2
%
 
126

 
1
%
 
1,575

 
3
%
 
767

 
2
%
Total
 
$
18,045

 
100
%
 
$
12,602

 
100
%
 
$
49,566

 
100
%
 
$
36,126

 
100
%
Our customers include academic research institutions, clinical laboratories, and pharmaceutical, biotechnology, and Ag-Bio companies worldwide. Total revenue from our five largest customers in each of the periods presented comprised 21% and 18% of our total revenue in the three and nine months ended September 30, 2013, respectively, and 21% and 20% of our total revenue in the three and nine months ended September 30, 2012, respectively.


13

Table of Contents

Comparison of the Three Months Ended September 30, 2013 and September 30, 2012
Total Revenue
Total revenue increased by $5.5 million, or 43%, to $18.3 million for the three months ended September 30, 2013, compared to $12.8 million for the three months ended September 30, 2012.
Product Revenue
Product revenue increased by $5.4 million, or 43%, to $18.0 million for the three months ended September 30, 2013, compared to $12.6 million for the three months ended September 30, 2012.
Instrument revenue increased by $4.1 million, or 61%, primarily driven by increased unit sales of our analytical systems and increased unit sales of our preparatory systems, including our C1 Single-Cell Auto Prep System, which was first sold as a new product in the third quarter of 2012. Also contributing to the increase to a lesser extent were higher revenues from service offerings and higher average unit selling prices of our instrument systems.
Consumables revenue increased by $1.3 million, or 22%, primarily due to growth in IFC unit volume, which was driven by increased sales to production genomics customers, and, to a lesser extent, higher average selling prices, increased sales to research customers, and increased sales of assays and reagents. The revenue increase was offset in part by a shift in sales mix to IFCs with lower average selling prices. Annualized IFC pull-through for our analytical systems was within our historical range of $40,000 to $50,000 per system and above the historical range of $10,000 to $15,000 per system for preparatory systems.
We expect total unit sales of both instruments and consumables to increase over time as we continue our efforts to grow our customer base, expand our geographic market coverage, and launch new products. However, we expect the average selling prices of our products to fluctuate over time based on market conditions, product mix, and currency fluctuations.
Grant Revenue
Grant revenue consists of a grant from California Institute for Regenerative Medicine, or CIRM. Our CIRM grant was awarded in 2011 in the amount of $1.9 million to be earned over a three-year period. The CIRM grant revenue is recognized as the related research and development services are performed, and costs associated with the grants are recognized as research and development expense during the period incurred.
Grant revenue was $0.2 million for each of the three months ended September 30, 2013 and 2012.
Cost of Product Revenue
The following table presents our cost of product revenue and product margin for each period presented (in thousands, other than percentages):
 
 
 
Three Months Ended 
 September 30,
2013
 
2012
Cost of product revenue
 
$
5,138

 
$
3,518

Product margin
 
72
%
 
72
%
Cost of product revenue includes manufacturing costs incurred in the production process, including component materials, labor and overhead, installation, packaging, and delivery costs. In addition, cost of product revenue includes royalty costs for licensed technologies included in our products, warranty, service, provisions for slow-moving and obsolete inventory, and stock-based compensation expense. Costs related to license and grant revenue are included in research and development expense.
Cost of product revenue increased by $1.6 million, or 46%, to $5.1 million for the three months ended September 30, 2013 primarily due to increased product revenue. Overall cost of product revenue as a percentage of related revenue was relatively flat at approximately 28% for the three months ended September 30, 2013 and 2012. The favorable effects of higher average selling prices for consumables and instruments, increased IFC capacity utilization and production yields, and improved instrument distribution and logistics efficiency were offset by a higher product mix of lower margin instrument systems relative to consumables, higher production costs for assays and reagents, and higher analytical systems materials costs.

14

Table of Contents

Operating Expenses
The following table presents our operating expenses for each period presented (in thousands):
 
 
 
Three Months Ended 
 September 30,
2013
 
2012
Research and development
 
$
5,004

 
$
4,071

Selling, general and administrative
 
12,097

 
9,102

Total operating expenses
 
$
17,101

 
$
13,173

Research and Development
Research and development expense consists primarily of personnel and independent contractor costs, prototype and material expenses, and other allocated facilities and information technology expenses. We have made substantial investments in research and development since our inception. Our research and development efforts have focused primarily on enhancing our technologies and supporting development and commercialization of new and existing products and services.
Research and development expense increased $0.9 million, or 23%, to $5.0 million for the three months ended September 30, 2013, compared to $4.1 million for the three months ended September 30, 2012. The increase in research and development expense was primarily due to an increase in headcount and other compensation-related costs of $0.7 million, and an increase in facility expenses of $0.2 million. We incurred these costs to support our development and commercialization of new and existing products and services.
We believe that our continued investment in research and development is essential to our long-term competitive position and these expenses may increase in future periods.
Selling, General and Administrative
Selling, general and administrative expense consists primarily of personnel costs for our sales and marketing, business development, finance, legal, human resources, and general management, as well as professional services, such as legal and accounting services.
Selling, general and administrative expense increased $3.0 million, or 33%, to $12.1 million for the three months ended September 30, 2013, compared to $9.1 million for the three months ended September 30, 2012. The increase was primarily due to an increase in headcount and other compensation-related costs of $1.7 million, and to a lesser extent, an increase in legal fees of $0.5 million, an increase in sales and marketing activities of $0.3 million, and an increase in accounting and outside services of $0.2 million. The increase was primarily driven by expansion of our worldwide commercial capabilities, and to a lesser extent, general and administrative expense to support our growth and legal fees related to litigation against NanoString Technologies, Inc.
We expect selling, general and administrative expense to increase in future periods as we continue to grow our sales, technical support, marketing, and administrative headcount, support increased product sales, broaden our customer base, and incur additional costs to support our expanding global footprint and the overall growth in our business.
Litigation Settlement
Pursuant to the terms of a patent cross license agreement with Applied Biosystems, LLC (now part of Life Technologies Corporation, or Life), we are obligated to make a $1.0 million payment to Life upon satisfaction of certain conditions. We do not believe that the conditions triggering the payment obligation have been met; however, on October 16, 2013, Life provided notice that the $1.0 million payment is due and payable under the license agreement. We intend to dispute Life’s claim to the contingent payment, but it is probable that we will make the payment while reserving our rights to dispute the obligation. Among other reasons, we would make the payment to avoid what would be, in our view, an improper termination of our license to certain Life patent filings under the agreement, which could subject our relevant product lines to risks associated with patent infringement litigation.  As we believe that making the disputed payment is probable, we accrued a loss contingency of $1.0 million in the three months ended September 30, 2013.

15

Table of Contents

Interest Expense and Other Income and Expense, Net
We have incurred interest expense and amortization of debt discount related to our long-term debt. The following table presents interest expense and other income and expense items for each period presented (in thousands):
 
 
 
Three Months Ended 
 September 30,
2013
 
2012
Interest expense
 
$
(1
)
 
$
(107
)
Other income (expense), net
 
709

 
(75
)
In September 2012, we paid the remaining balance due under our long-term debt. Accordingly, we did not incur any interest expense on long-term debt during the three months ended September 30, 2013. As a result, interest expense decreased by $0.1 million, or 99%, for the three months ended September 30, 2013 compared to the three months ended September 30, 2012. We expect interest expense to be less in 2013 compared to 2012 because we have fully repaid our long-term debt.
Other income, net increased by $0.8 million for the three months ended September 30, 2013 compared to other expense, net of $75,000 for the three months ended September 30, 2012 primarily because of the $0.6 million gain resulting from settlement of litigation filed by us against NanoString Technologies, Inc.
Comparison of the Nine Months Ended September 30, 2013 and September 30, 2012
Total Revenue
Total revenue increased by $13.6 million, or 37%, to $50.3 million for the nine months ended September 30, 2013, compared to $36.7 million for the nine months ended September 30, 2012.
Product Revenue
Product revenue increased by $13.4 million, or 37%, to $49.6 million for the nine months ended September 30, 2013, compared to $36.1 million for the nine months ended September 30, 2012.
Instrument revenue increased by $9.4 million, or 48%, primarily driven by increases in unit sales of our preparatory systems, which include our C1 Single-Cell Auto Prep System, first sold as a new product in the third quarter of 2012, and to a lesser extent, increases in unit sales of our analytical systems. Increased sales of our service offerings and higher average selling prices of our instrument systems also contributed to the increase in instrument revenue. The revenue increase was offset in part by lower unit sales of our EP1 system, an analytical systems instrument.
Consumables revenue increased by $4.0 million, or 24%, primarily due to growth in IFC unit volume, driven by increased sales to production genomics customers. Annualized IFC pull-through for our analytical systems was within our historical range of $40,000 to $50,000 per system and above the historical range of $10,000 to $15,000 per system for preparatory systems. Increases in assays and reagents sales also contributed to the increase in consumables revenue.
We expect total unit sales of both instruments and consumables to increase over time as we continue our efforts to grow our customer base, expand our geographic market coverage, and launch new products. However, we expect the average selling prices of our products to fluctuate over time based on market conditions, product mix, and currency fluctuations.
Grant Revenue
Grant revenue consists of a grant from California Institute for Regenerative Medicine, or CIRM. Our CIRM grant was awarded in 2011 in the amount of $1.9 million to be earned over a three-year period. The CIRM grant revenue is recognized as the related research and development services are performed, and costs associated with the grants are recognized as research and development expense during the period incurred.
Grant revenue was $0.5 million for each of the nine months ended September 30, 2013 and 2012.

16

Table of Contents

Cost of Product Revenue
The following table presents our cost of product revenue and product margin for each period presented (in thousands, other than percentages):
 
 
 
Nine Months Ended 
 September 30,
2013
 
2012
Cost of product revenue
 
$
14,273

 
$
10,990

Product margin
 
71
%
 
70
%
Cost of product revenue includes manufacturing costs incurred in the production process, including component materials, labor and overhead, installation, packaging, and delivery costs. In addition, cost of product revenue includes royalty costs for licensed technologies included in our products, warranty, service, provisions for slow-moving and obsolete inventory, and stock-based compensation expense. Costs related to license and grant revenue are included in research and development expense.
Cost of product revenue increased by $3.3 million, or 30%, to $14.3 million for the nine months ended September 30, 2013 from $11.0 million for the nine months ended September 30, 2012 primarily due to increased product revenue. Cost of product revenue as a percentage of related revenue was 29% and 30% for the nine months ended September 30, 2013 and 2012, respectively. This improvement was driven by higher IFC capacity utilization and improved production yields; higher average unit selling prices for instruments and IFCs; and a favorable change in the instruments sales mix primarily due to increased sales of our C1 Single-Cell Auto Prep System, first sold as a new product in the third quarter of 2012, which has a higher margin than other instruments. This was offset in part by a higher product mix of lower margin instrument systems relative to consumables; higher production costs for assays and reagents; and higher service costs.
Operating Expenses
The following table presents our operating expenses for each period presented (in thousands):
 
 
 
Nine Months Ended 
 September 30,
2013
 
2012
Research and development
 
$
14,198

 
$
12,337

Selling, general and administrative
 
34,840

 
27,926

Total operating expenses
 
$
49,038

 
$
40,263

Research and Development
Research and development expense consists primarily of personnel and independent contractor costs, prototype and material expenses, and other allocated facilities and information technology expenses. We have made substantial investments in research and development since our inception. Our research and development efforts have focused primarily on enhancing our technologies and supporting development and commercialization of new and existing products and services.
Research and development expense was $14.2 million for the nine months ended September 30, 2013, an increase of $1.9 million, or 15%, compared to $12.3 million for the nine months ended September 30, 2012. The increase in research and development expense was primarily due to an increase in headcount and other compensation-related costs of $1.3 million, and an increase in facility expenses of $0.5 million. These increased costs were in support of our development and commercialization of new and existing products and services.
We believe that our continued investment in research and development is essential to our long-term competitive position and these expenses may increase in future periods.
Selling, General and Administrative
Selling, general and administrative expense consists primarily of personnel costs for our sales and marketing, business development, finance, legal, human resources, and general management, as well as professional services, such as legal and accounting services.
Selling, general and administrative expense increased $6.9 million, or 25%, to $34.8 million for the nine months ended September 30, 2013, compared to $27.9 million for the nine months ended September 30, 2012. The increase was primarily due to

17

Table of Contents

an increase in headcount and other compensation-related costs of $5.0 million, and to a lesser extent, an increase in sales and marketing activities of $1.0 million, and an increase in legal fees of $0.8 million. The increase was primarily driven by expansion of worldwide commercial capabilities to support our growth, and to a lesser extent, general and administrative expense to support our growth and legal fees related to litigation against NanoString Technologies, Inc.
We expect selling, general and administrative expense to increase in future periods as we continue to grow our sales, technical support, marketing, and administrative headcount, support increased product sales, broaden our customer base, and incur additional costs to support our expanding global footprint and the overall growth in our business.
Litigation Settlement
Pursuant to the terms of a patent cross license agreement with Life, we are obligated to make a $1.0 million payment to Life upon satisfaction of certain conditions. We do not believe that the conditions triggering the payment obligation have been met; however, on October 16, 2013, Life provided notice that the $1.0 million payment is due and payable under the license agreement. We intend to dispute Life’s claim to the contingent payment, but it is probable that we will make the payment while reserving our rights to dispute the obligation. Among other reasons, we would make the payment to avoid what would be, in our view, an improper termination of our license to certain Life patent filings under the agreement, which could subject our relevant product lines to risks associated with patent infringement litigation.  As we believe that making the disputed payment is probable, we accrued a loss contingency of $1.0 million in the three months ended September 30, 2013.
Interest Expense and Other Income and Expense, Net
We have incurred interest expense and amortization of debt discount related to our long-term debt. The following table presents interest expense and other income and expense items for each period presented (in thousands):
 
 
 
Nine Months Ended 
 September 30,
2013
 
2012
Interest expense
 
$
(13
)
 
$
(616
)
Gain from sale of investment in Verinata
 
1,777

 

Other income (expense), net
 
457

 
(127
)
Interest expense decreased $603,000, or 98%, to $13,000 for the nine months ended September 30, 2013, compared to $616,000 for the nine months ended September 30, 2012. In September 2012, we paid the remaining balance due under our long-term debt. Accordingly, we did not incur any interest expense on long-term debt during the nine months ended September 30, 2013. We expect interest expense to be less in 2013 compared to 2012 because we have fully repaid our long-term debt.
In February 2013, Illumina, Inc. acquired Verinata Health, Inc. (Verinata) for $350 million in cash and up to an additional $100 million in milestone payments through 2015. In March 2013, we received cash proceeds of $3.1 million in exchange for our ownership interest in Verinata, resulting in a gain of $1.8 million. If the milestone payments become payable in the future, we could receive up to $3.2 million in additional proceeds. The $1.8 million gain we recognized did not include any amounts that may be received upon the achievement of future milestones.
Other income, net increased $0.6 million to $0.5 million for the nine months ended September 30, 2013 compared to other expense, net of $0.1 million for the nine months ended September 30, 2012 primarily because of the $0.6 million gain resulting from settlement of litigation filed by us against NanoString Technologies, Inc., partially offset by net foreign exchange losses resulting primarily from unfavorable change in the Japanese Yen.
Liquidity and Capital Resources
Sources of Liquidity
As of September 30, 2013, our principal sources of liquidity consisted of $20.1 million of cash and cash equivalents and $62.7 million of investments. As of September 30, 2013, our working capital totaled $74.4 million.

18

Table of Contents

The following table presents our cash flow summary for each period presented (in thousands):
 
 
 
Nine Months Ended 
 September 30,
 
 
2013
 
2012
Cash flow summary
 
 
 
 
Net cash used in operating activities
 
$
(4,829
)
 
$
(13,979
)
Net cash (used in) provided by investing activities
 
(37,182
)
 
16,444

Net cash provided by financing activities
 
3,501

 
49,953

Net (decrease) increase in cash and cash equivalents
 
(38,550
)
 
52,458

Net Cash Used in Operating Activities
We derive cash flows from operations primarily from cash collected from the sale of our products, license agreements, and grants from certain government entities. Our cash flows from operating activities are also significantly influenced by our use of cash for operating expenses to support the growth of our business. We have historically experienced negative cash flows from operating activities as we have expanded our business and built our infrastructure domestically and internationally, and this may continue in the future.
Net cash used in operating activities was $4.8 million for the nine months ended September 30, 2013, compared to $14.0 million for the nine months ended September 30, 2012, a decrease of $9.2 million. Cash used for working capital purposes decreased by $4.3 million, driven primarily by increased cash collections from our customers and increase in accounts payable. Our net loss, adjusted for non-cash and non-operating items and deferred revenue, for the nine months ended September 30, 2013 decreased by $4.9 million, compared to the same period in 2012.
Net Cash (Used In) Provided by Investing Activities
Our primary investing activities consist of purchases, sales, and maturities of our short-term and long-term investments, and capital expenditures for manufacturing, laboratory, and computer equipment and software to support our expanding infrastructure and work force. We expect to continue to expand our manufacturing capability, including improvements in manufacturing productivity, and expect to incur additional costs for capital expenditures related to these efforts in future periods. In addition, we expect to continue to incur costs for capital expenditures for demonstration units and loaner equipment to support our sales and service efforts, and computer equipment and software to support our growth.
Net cash used in investing activities was $37.2 million during the nine months ended September 30, 2013. Net cash used in investing activities primarily consisted of purchases of investments of $56.8 million, purchase of intangible assets from Helicos Biosciences Corporation and related transaction costs of $1.0 million, and purchases of capital equipment of $1.6 million to support growth in our commercial and manufacturing operations, partially offset by proceeds from sales and maturities of investments of $19.1 million and proceeds from the sale of our investment in Verinata of $3.1 million.
Net cash provided by investing activities was $16.4 million during the nine months ended September 30, 2012. Net cash provided by investing activities primarily consisted of proceeds from sales and maturities of investments of $45.8 million, partially offset by purchases of investments of $27.7 million and purchases of capital equipment of $1.6 million to support growth in our commercial and manufacturing operations.
Net Cash Provided by Financing Activities
Net cash provided by financing activities was $3.5 million during the nine months ended September 30, 2013 from proceeds received in connection with the exercise of options for our common stock.
Net cash provided by financing activities was $50.0 million during the nine months ended September 30, 2012 primarily relating to proceeds of approximately $56.1 million, net of underwriting discounts, commissions and offering expenses, from our underwritten public offering completed in August 2012, proceeds from the exercise of options to purchase our common stock of $2.1 million, and proceeds from our line of credit of $1.9 million, partially offset by repayment of principal on our long-term debt of $10.2 million.
Capital Resources
At September 30, 2013, our working capital was $74.4 million, including cash, cash equivalents, and investments of $82.8 million. We have a bank line of credit agreement that is collateralized by our assets, excluding intellectual property, and provides us the ability to draw up to $10.0 million, of which $6.0 million is available on a non-formula basis, subject to certain covenants

19

Table of Contents

and other restrictions. The balance of $4.0 million is available based on eligible receivables. At September 30, 2013, we had no borrowing outstanding under the bank line of credit. We are estimating capital expenditures to be higher in 2013 primarily to continue our improvements in manufacturing productivity, equipment for research and development to support development and commercialization of new and existing products and services, sales demonstration and loaner equipment to service the growth in our global customer base, and computer equipment and software to support our growth.
We believe our existing cash, cash equivalents, and investments will be sufficient to meet our working capital and capital expenditure needs for at least the next 18 months. However, we may experience lower than expected cash generated from operating activities or greater than expected capital expenditures, cost of revenue, or operating expenses, and we may need to raise additional capital to expand the commercialization of our products, expand and fund our operations, further our research and development activities, or acquire or invest in a business. Our future funding requirements will depend on many factors, including market acceptance of our products, the cost of our research and development activities, the cost of filing and prosecuting patent applications, the cost associated with litigation or disputes relating to intellectual property rights or otherwise, the cost and timing of regulatory clearances or approvals, if any, the cost and timing of establishing additional sales, marketing, and distribution capabilities, the cost and timing of establishing additional technical support capabilities, and the effect of competing technological and market developments. In the future, we may acquire businesses or technologies from third parties, and we may decide to raise additional capital through debt or equity financing to the extent we believe this is necessary to successfully complete these acquisitions. We currently have no material commitments or agreements relating to any such acquisitions.
If we require additional funds in the future, we may not be able to obtain such funds on acceptable terms, or at all. If we raise additional funds by issuing equity securities, our stockholders may experience dilution. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt or additional equity financing that we raise may contain terms that are not favorable to us or our stockholders. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or our products, or grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to liquidate some or all of our assets, or delay, reduce the scope of or eliminate some or all of our development programs. If we do not have, or are not able to obtain, sufficient funds, we may have to delay development or commercialization of our products or license to third parties the rights to commercialize products or technologies that we would otherwise seek to commercialize. We also may have to reduce marketing, customer support, research and development, or other resources devoted to our products or cease operations.
Off-Balance Sheet Arrangements
As of September 30, 2013, we did not have any off-balance sheet arrangements as defined in Item 303(a)(4) of Regulation S-K promulgated under the Exchange Act.
Contractual Obligations and Commitments
On April 9, 2013, we entered into an amendment (the Amendment) to the lease agreement dated as of September 4, 2010 (as amended, the Lease) relating to the lease of office and laboratory space at our headquarters located at 7000 Shoreline Court, South San Francisco, California. The Amendment provides for an expansion of the premises covered under the Lease to include space that is currently being subleased by us from a third party through March 31, 2014; an extension of the term of the Lease to April 30, 2020 with an option to renew for an additional five years; payment of base rent with rent escalation; and payment of certain operating expenses during the term of the Lease. The Amendment also provides for an allowance of approximately $0.7 million for tenant improvements, which, to the extent not used by March 31, 2015, will be used to offset base rent obligations, and an additional allowance of approximately $0.5 million for tenant improvements, which, if used, will be repaid in equal monthly payments with interest at a rate of 9% per annum over the remaining term of the Lease.
On October 14, 2013, Fluidigm Singapore Pte Ltd. (Fluidigm Singapore), our wholly-owned subsidiary, accepted an offer of tenancy (the Lease) from HSBC Institutional Trust Services (Singapore) Limited, as trustee of Ascendas Real Estate Investment Trust (the Landlord), relating to the lease of a facility located at Block 5008, Ang Mo Kio Avenue 5, TECHplace II, Singapore 569874. Pursuant to the terms of the Lease, it is expected that Fluidigm Singapore will be in possession of the facility commencing on March 2, 2014 for a term of 99 months. Aggregate gross rent (including service charges) due under the Lease will be SG$6.4 million (approximately US$5.1 million using the October 14, 2013 exchange rate). The Lease also provides Fluidigm Singapore with an option to renew the Lease for an additional 60 months at the then prevailing market rent, and on similar terms as the existing Lease, and a right of first refusal on certain additional space in the building beginning June 2, 2014 until June 1, 2015.


20

Table of Contents


Item 3. Quantitative and Qualitative Disclosures about Market Risk
Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our market risk exposure is primarily a result of fluctuations in foreign currency exchange rates and interest rates. We do not hold or issue financial instruments for trading purposes.
Foreign Currency Exchange Risk
As we expand internationally, our results of operations and cash flows will become increasingly subject to fluctuations due to changes in foreign currency exchange rates. Our revenue is generally denominated in the local currency of the contracting party. Historically, the majority of our revenue has been denominated in U.S. dollars. Our expenses are generally denominated in the currencies in which our operations are located, which is primarily in the United States, with a portion of expenses incurred in Singapore where our manufacturing facility is located. Our results of operations and cash flows are, therefore, subject to fluctuations due to changes in foreign currency exchange rates. Fluctuations in currency exchange rates could harm our business in the future. The effect of a 10% adverse change in exchange rates on foreign currency denominated cash, receivables and payables as of September 30, 2013 would not have been material. To date, we have not entered into any foreign currency hedging contracts although we may do so in the future.
Interest Rate Sensitivity
We had cash and cash equivalents of $20.1 million at September 30, 2013. These amounts were held primarily in cash on deposit with banks and cash equivalents. We had $62.7 million in investments at September 30, 2013 held primarily in U.S. government and agency securities. The contractual maturity dates of $43.6 million of our U.S. government and agency securities are within one year from September 30, 2013. The contractual maturity dates of our remaining U.S. government and agency securities are less than eighteen months from September 30, 2013. Cash and cash equivalents and investments are held for working capital purposes. Due to the short-term nature of these investments, we believe that we do not have any material exposure to changes in the fair value of our investment portfolio as a result of changes in interest rates. Declines in interest rates, however, will reduce future investment income. If overall interest rates had decreased by 10% during the periods presented, our interest income would not have been materially affected.
Fair Value of Financial Instruments
We do not have material exposure to market risk with respect to investments. We do not use derivative financial instruments for speculative or trading purposes. However, we may adopt specific hedging strategies in the future.

Item 4. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
Our management, with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of September 30, 2013. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Based on the evaluation of our disclosure controls and procedures as of September 30, 2013, our Chief Executive Officer and Chief Financial Officer concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.
Changes in Internal Control Over Financial Reporting
There were no changes in our internal control over financial reporting that occurred during the three months ended September 30, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Limitations on the Effectiveness of Controls
Control systems, no matter how well conceived and operated, are designed to provide a reasonable, but not an absolute, level of assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact

21

Table of Contents

that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Because of the inherent limitations in any control system, misstatements due to error or fraud may occur and not be detected.


22

Table of Contents

PART II. OTHER INFORMATION
Item 1. Legal Proceedings.
On November 6, 2012, we filed a complaint against NanoString Technologies, Inc., or NanoString, in the United States District Court in the Northern District of California (Civil Action No. 12-5712), alleging claims of false advertising, unfair competition, and unlawful trade practice in violation of the Lanham Act and corresponding sections of the California Business & Professions Code. Our complaint sought to enjoin NanoString from continuing to make or disseminate any of the false and misleading claims, misrepresenting and/or exaggerating the performance of its product in comparison with our BioMark System, to require NanoString to retract, remove, or correct the false and misleading advertising claims, and to recover damages and other relief for harm caused to us by NanoString. On January 4, 2013, NanoString answered the complaint, denying the allegations against it. On April 22, 2013, we amended our complaint to add new facts and information in support of our existing claims. On May 9, 2013, NanoString filed an amended answer, denying the further allegations against it. The parties engaged in written discovery and document production, and a jury trial was set to begin on March 24, 2014. In addition, we filed a lawsuit on April 5, 2013 in Singapore against NanoString alleging malicious falsehood in advertising and trademark infringement. On September 30, 2013, we and NanoString agreed to settle the lawsuits. The terms of the settlement require NanoString to, among other things, remove all references – from its marketing materials, website, and promotional activities – to a single-cell comparison study comparing Fluidigm and NanoString single-cell products, as well as recall and destroy all materials related to and/or based on the study. The case brought in the United States District Court in the Northern District of California was dismissed on October 22, 2013, and the case brought in Singapore was discontinued on October 29, 2013.

Item 1A. Risk Factors.
We operate in a rapidly changing environment that involves numerous uncertainties and risks. The following risks and uncertainties may have a material and adverse effect on our business, financial condition or results of operations. You should consider these risks and uncertainties carefully, together with all of the other information included or incorporated by reference in this Form 10-Q. If any of the risks or uncertainties we face were to occur, the trading price of our securities could decline, and you may lose all or part of your investment.
Risks Related to our Business and Strategy
Emerging market opportunities may not develop as quickly as we expect, limiting our ability to successfully market and sell our products, or our product development and strategic plans relating to such markets may change and our entry into these emerging markets may be delayed, if it occurs at all.
The application of our technologies to single-cell genomics, digital polymerase chain reaction, or digital PCR, and sample preparation for next-generation DNA sequencing are emerging market opportunities. We believe these opportunities will take several years to develop or mature and we cannot be certain that these market opportunities will develop as we expect. For example, we launched our C1 Single-Cell Auto Prep System in June 2012, which applies our technology to, among other things, improve single-cell analytic workflow for single-cell genomics. The future growth of the single-cell genomics market and the success of our new system depend on many factors beyond our control, including recognition and acceptance by the scientific community, and the growth, prevalence, and costs of competing methods of genetic analysis. If the market for single-cell genomics, digital PCR, and sample preparation for next-generation DNA sequencing do not develop as we expect, our business may be adversely affected. Additionally, our success in these emerging markets may depend to a large extent on our ability to successfully market and sell products using our technologies. If we are not able to successfully market and sell our products, or to achieve the revenue or margins we expect, our operating results may be harmed and we may not recover our product development and marketing expenditures. In addition, our product development and strategic plans may change, which could delay or impede our entry into emerging markets.
Our financial results may vary significantly from quarter-to-quarter due to a number of factors, which may lead to volatility in our stock price.
Our quarterly revenue and results of operations have varied in the past and may continue to vary significantly from quarter-to-quarter. For example, in 2010, 2011, and 2012, we experienced higher sales in the fourth quarter than in the first quarter of the next fiscal year. In addition, revenue from sales of our instruments relative to sales of our consumables may fluctuate or deviate significantly from expectations. The variability in our quarterly results of operations, including revenue from sales of our instruments relative to our consumables, may lead to volatility in our stock price as research analysts and investors respond to these quarterly fluctuations. These fluctuations are due to numerous factors that are difficult to forecast, including: fluctuations in demand for our products; changes in customer budget cycles and capital spending; seasonal variations in customer operations; tendencies among some customers to defer purchase decisions to the end of the quarter; the large unit value of our systems;

23

Table of Contents

changes in our pricing and sales policies or the pricing and sales policies of our competitors; our ability to design, manufacture and deliver products to our customers in a timely and cost-effective manner; quality control or yield problems in our manufacturing operations; our ability to timely obtain adequate quantities of the components used in our products; new product introductions and enhancements by us and our competitors; unanticipated increases in costs or expenses; our complex, variable and, at times, lengthy sales cycle; global economic conditions; and fluctuations in foreign currency exchange rates. Additionally, we have certain customers who have historically placed large orders in multiple quarters during a calendar year. A significant reduction in orders from one or more of these customers could adversely affect our revenue and operating results, and if these customers defer or cancel purchases or otherwise alter their purchasing patterns, our quarter-to-quarter financial results could be significantly impacted.
The foregoing factors, as well as other factors, could materially and adversely affect our quarterly and annual results of operations. In addition, a significant amount of our operating expenses are relatively fixed due to our manufacturing, research and development, and sales and general administrative efforts. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. We expect that our sales will continue to fluctuate on a quarterly basis and that our financial results for some periods may be below those projected by securities analysts, which could significantly decrease the price of our common stock.
We have incurred losses since inception, and we may continue to incur substantial losses for the foreseeable future.
We have a limited operating history and have incurred significant losses in each fiscal year since our inception, including net losses of $11.9 million, $19.0 million, $22.5 million, and $16.9 million during the nine months ended September 30, 2013 and the years 2012, 2011, and 2010, respectively. As of September 30, 2013, we had an accumulated deficit of $252.7 million. These losses have resulted principally from costs incurred in our research and development programs, and from our manufacturing costs and selling, general, and administrative expenses. We may continue to incur substantial operating and net losses and negative cash flow from operations. We expect that our selling, general, and administrative expenses will continue to increase due to the additional operational and reporting costs associated with being a public company. We anticipate that our business will generate operating losses until we successfully implement our commercial development strategy and generate significant additional revenue to support our level of operating expenses. Because of the numerous risks and uncertainties associated with our commercialization efforts and future product development, we are unable to predict when we will become profitable, and we may never become profitable. Even if we do achieve profitability, we may not be able to sustain or increase our profitability.
If our research and product development efforts do not result in commercially viable products within anticipated timelines, if at all, our business and results of operations will be adversely affected.
Our business is dependent on the improvement of our existing products, our development of new products to serve existing markets, and our development of new products to create new markets and applications that were previously not practical with existing systems. We intend to devote significant personnel and financial resources to research and development activities designed to advance the capabilities of our microfluidic systems technology. We have developed design rules for the implementation of our technology that are frequently revised to reflect new insights we have gained about the technology. In addition, we have discovered that biological or chemical reactions sometimes behave differently when implemented on our systems rather than in a standard laboratory environment. Furthermore, many such reactions take place within the confines of single cells, which have also demonstrated unexpected behavior when grown and manipulated within microfluidic environments. As a result, research and development efforts may be required to transfer certain reactions and cell handling techniques to our systems. In the past, product development projects have been significantly delayed when we encountered unanticipated difficulties in implementing a process on our systems. We may have similar delays in the future, and we may not obtain any benefits from our research and development activities. Any delay or failure by us to develop new products or enhance existing products would have a substantial adverse effect on our business and results of operations.
If our products fail to achieve and sustain sufficient market acceptance, our revenue will be adversely affected.
Our success depends, in part, on our ability to develop and market products that are recognized and accepted as reliable, enabling and cost-effective. Most of our potential customers already use expensive research systems in their laboratories and may be reluctant to replace those systems. Market acceptance of our systems will depend on many factors, including our ability to convince potential customers that our systems are an attractive alternative to existing technologies. Compared to some competing technologies, our microfluidic technology is relatively new, and most potential customers have limited knowledge of, or experience with, our products. Prior to adopting our microfluidic systems, some potential customers may need to devote time and effort to testing and validating our systems. Any failure of our systems to meet these customer benchmarks could result in customers choosing to retain their existing systems or to purchase systems other than ours.
In addition, it is important that our systems be perceived as accurate and reliable by the scientific and medical research community as a whole. Historically, a significant part of our sales and marketing efforts has been directed at convincing industry

24

Table of Contents

leaders of the advantages of our systems and encouraging such leaders to publish or present the results of their evaluation of our system. If we are unable to continue to induce leading researchers to use our systems, or if such researchers are unable to achieve and publish or present significant experimental results using our systems, acceptance and adoption of our systems will be slowed and our ability to increase our revenue would be adversely affected.
Our future success is dependent upon our ability to expand our customer base and introduce new applications.
Our customer base is primarily composed of academic institutions, clinical laboratories, and pharmaceutical, biotechnology, and agricultural biotechnology, or Ag-Bio, companies that perform analyses for research and commercial purposes. Our success will depend, in part, upon our ability to increase our market share among these customers, attract additional customers outside of these markets, and market new applications to existing and new customers as we develop such applications. Attracting new customers and introducing new applications requires substantial time and expense. For example, it may be difficult to identify, engage and market to customers who are unfamiliar with the current applications of our systems. Any failure to expand our existing customer base or launch new applications would adversely affect our ability to increase our revenue.
The life science research and Ag-Bio markets are highly competitive and subject to rapid technological change, and we may not be able to successfully compete.
The markets for our products are characterized by rapidly changing technology, evolving industry standards, changes in customer needs, emerging competition, new product introductions, and strong price competition. We compete with both established and development stage life science research companies that design, manufacture, and market instruments and consumables for gene expression analysis, targeted single-cell gene expression analysis, genotyping, PCR, digital PCR, other nucleic acid detection, and additional applications using well established laboratory techniques, as well as newer technologies such as bead encoded arrays, microfluidics, nanotechnology, high-throughput DNA sequencing, microdroplets, and photolithographic arrays. Most of our current competitors have significantly greater name recognition, greater financial and human resources, broader product lines and product packages, larger sales forces, larger existing installed bases, larger intellectual property portfolios, and greater experience and scale in research and development, manufacturing, and marketing than we do. For example, companies such as Affymetrix, Inc., Agilent Technologies, Inc., Bio-Rad Laboratories, Inc., Illumina, Inc., Life Technologies Corporation, LGC Limited, Luminex Corporation, PerkinElmer, Inc. (through its acquisition of Caliper Life Sciences, Inc.), RainDance Technologies, Inc., Roche Applied Science (a division of Roche Diagnostics Corporation), Sequenom, Inc., Thermo Fisher Scientific Inc., and WaferGen Bio-systems, Inc. have products that compete in certain segments of the market in which we sell our products.
Competitors may be able to respond more quickly and effectively than we can to new or changing opportunities, technologies, standards, or customer requirements. In light of these advantages, even if our technology is more effective than the product or service offerings of our competitors, current or potential customers might accept competitive products and services in lieu of purchasing our technology. We anticipate that we will face increased competition in the future as existing companies and competitors develop new or improved products and as new companies enter the market with new technologies. Increased competition is likely to result in pricing pressures, which could reduce our profit margins and increase our sales and marketing expenses. In addition, mergers, consolidations, or other strategic transactions between two or more of our competitors, or between our competitor and one of our key customers, could change the competitive landscape and weaken our competitive position, adversely affecting our business.
Our business depends on research and development spending levels of academic, clinical, and governmental research institutions, and pharmaceutical, biotechnology, and Ag-Bio companies, a reduction in which could limit our ability to sell our products and adversely affect our business.
We expect that our revenue in the foreseeable future will be derived primarily from sales of our microfluidic systems and integrated fluidic circuits, or IFCs, to academic institutions, clinical laboratories, and pharmaceutical, biotechnology, and Ag-Bio companies worldwide. Our success will depend upon their demand for and use of our products. Accordingly, the spending policies of these customers could have a significant effect on the demand for our technology. These policies may be based on a wide variety of factors, including concerns regarding the federal government budget sequestration, the availability of resources to make purchases, the spending priorities among various types of equipment, policies regarding spending during recessionary periods, and changes in the political climate. In addition, academic, governmental, and other research institutions that fund research and development activities may be subject to stringent budgetary constraints that could result in spending reductions, reduced allocations, or budget cutbacks, which could jeopardize the ability of these customers to purchase our products. Our operating results may fluctuate substantially due to reductions and delays in research and development expenditures by these customers. For example, reductions in capital and operating expenditures by these customers may result in lower than expected sales of our microfluidic systems and IFCs. These reductions and delays may result from factors that are not within our control, such as:
changes in economic conditions;

25

Table of Contents

natural disasters;
changes in government programs that provide funding to research institutions and companies;
changes in the regulatory environment affecting life science and Ag-Bio companies engaged in research and commercial activities;
differences in budget cycles across various geographies and industries;
market-driven pressures on companies to consolidate operations and reduce costs;
mergers and acquisitions in the life science and Ag-Bio industries; and
other factors affecting research and development spending.
Any decrease in our customers’ budgets or expenditures, or in the size, scope, or frequency of capital or operating expenditures, could materially and adversely affect our operations or financial condition.
We may not be able to develop new products or enhance the capabilities of our existing microfluidic systems to keep pace with rapidly changing technology and customer requirements, which could have a material adverse effect on our business, revenue, financial condition, and operating results.
Our success depends on our ability to develop new products and applications for our technology in existing and new markets, while improving the performance and cost-effectiveness of our systems. New technologies, techniques, or products could emerge that might offer better combinations of price and performance than our current or future product lines and systems. Existing markets for our products, including single-cell genomics, gene expression analysis, genotyping, and digital PCR, as well as potential markets for our products such as high-throughput DNA sequencing and molecular diagnostics applications, are characterized by rapid technological change and innovation. It is critical to our success for us to anticipate changes in technology and customer requirements and to successfully introduce new, enhanced, and competitive technology to meet our customers’ and prospective customers’ needs on a timely and cost-effective basis. Developing and implementing new technologies will require us to incur substantial development costs and we may not have adequate resources available to be able to successfully introduce new applications of, or enhancements to, our systems. We cannot guarantee that we will be able to maintain technological advantages over emerging technologies in the future. While we typically plan improvements to our systems, we may not be able to successfully implement these improvements. If we fail to keep pace with emerging technologies, demand for our systems will not grow and may decline, and our business, revenue, financial condition, and operating results could suffer materially. In addition, if we introduce enhanced systems but fail to manage product transitions effectively, customers may delay or forgo purchases of our systems and our operating results may be adversely affected by product obsolescence and excess inventory. Even if we successfully implement some or all of these planned improvements, we cannot guarantee that our current and potential customers will find our enhanced systems to be an attractive alternative to existing technologies, including our current products.
If one or more of our manufacturing facilities become unavailable or inoperable, we will be unable to continue manufacturing our instruments, IFCs, and/or assays and, as a result, our business will be harmed until we are able to secure a new facility.
We manufacture all of our instruments and IFCs for commercial sale at our facility in Singapore and our assays for commercial sale at our headquarters in South San Francisco, California. No other manufacturing facilities are currently available to us, particularly facilities of the size and scope required by our Singapore operations. Our facilities and the equipment we use to manufacture our instruments, IFCs, and assays would be costly to replace and could require substantial lead time to repair or replace. Our facilities may be harmed or rendered inoperable by natural or man-made disasters, which may render it difficult or impossible for us to manufacture our products for some period of time. If any of our facilities become unavailable to us, we cannot provide assurances that we will be able to secure a new manufacturing facility on acceptable terms, if at all. The inability to manufacture our products, combined with our limited inventory of manufactured supplies, may result in the loss of customers or harm our reputation, and we may be unable to reestablish relationships with those customers in the future. Although we possess insurance for damage to our property and the disruption of our business, this insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.
The current leases for our manufacturing facility in Singapore expire at various times through August 2016 and our current lease for office and laboratory space at our headquarters in South San Francisco expires in April 2020. On October 14, 2013, Fluidigm Singapore Pte Ltd., or Fluidigm Singapore, our wholly-owned subsidiary, accepted an offer of tenancy relating to the lease of a new manufacturing facility in Singapore, which expires on June 1, 2022. We expect to consolidate our manufacturing operations in the new space in the third quarter of 2014. Such a move will involve significant expense in connection with the establishment of new clean rooms, the movement and installation of key manufacturing equipment, and qualification of the new facility, and we cannot assure you that such a move would not delay or otherwise adversely affect our manufacturing activities. If

26

Table of Contents

our manufacturing capabilities are impaired by our move, we may not be able to manufacture and ship our products in a timely manner, which would adversely impact our business.
We are dependent on single source suppliers for some of the components and materials used in our products, and the loss of any of these suppliers could harm our business.
We rely on single source suppliers for certain components and materials used in our products. Additionally, several of our instruments are assembled at the facilities of contract manufacturers in Singapore. We do not have long term contracts with our suppliers of these components and materials or our assembly service providers. The loss of the single source suppliers of any of the following components and/or materials would require significant time and effort to locate and qualify an alternative source of supply:
The IFCs used in our microfluidic systems are fabricated using a specialized polymer that is available from a limited number of sources. In the past, we have encountered quality issues that have reduced our manufacturing yield or required the use of additional manufacturing processes.
The reader for our BioMark System requires specialized custom camera lenses, fiber light guides, and other components that are available from a limited number of sources.
Specialized pneumatic and electronic components for our C1 Single-Cell Auto Prep System are available from a limited number of sources.
The raw materials for our DELTAgene and SNPtype assays and Access Array Target-Specific primers are available from a limited number of sources.
Our reliance on single source suppliers and assembly service providers also subjects us to other risks that could harm our business, including the following:
we may be subject to increased component or assembly costs;
we may not be able to obtain adequate supply or services in a timely manner or on commercially reasonable terms;
our suppliers or service providers may make errors in manufacturing or assembly of components that could negatively affect the efficacy of our products or cause delays in shipment of our products; and
our suppliers or service providers may encounter capacity constraints or financial hardships unrelated to our demand for components or services, which could inhibit their ability to fulfill our orders and meet our requirements.
We have in the past experienced quality control and supply problems with some of our suppliers, such as manufacturing errors, and may again experience problems in the future. We may not be able to quickly establish additional or replacement suppliers, particularly for our single source components, or assembly service providers. Any interruption or delay in the supply of components or materials or assembly of our instruments, or our inability to obtain components, materials, or assembly services from alternate sources at acceptable prices in a timely manner, could impair our ability to meet the demand of our customers and cause them to cancel orders or switch to competitive products.
We may experience development or manufacturing problems or delays that could limit the growth of our revenue or increase our losses.
We may encounter unforeseen situations in the manufacturing and assembly of our products that would result in delays or shortfalls in our production. For example, we expect to consolidate our manufacturing operations in a new facility in the third quarter of 2014. Such a move will involve significant expense, and we cannot assure you that such a move would not delay or otherwise adversely affect our manufacturing activities. In addition, our production processes and assembly methods may have to change to accommodate any significant future expansion of our manufacturing capacity, which may increase our manufacturing costs, delay production of our products, reduce our product margin, and adversely impact our business. If our manufacturing activities are adversely impacted by our move, or if we are otherwise unable to keep up with demand for our products by successfully manufacturing, assembling, testing, and shipping our products in a timely manner, our revenue could be impaired, market acceptance for our products could be adversely affected and our customers might instead purchase our competitors’ products.
All of our IFCs for commercial sale are manufactured at our facility in Singapore. Production of the elastomeric block that is at the core of our IFCs is a complex process requiring advanced clean rooms, sophisticated equipment, and strict adherence to procedures. Any contamination of the clean room, equipment malfunction, or failure to strictly follow procedures can significantly reduce our yield in one or more batches. We have in the past experienced variations in yields due to such factors. A drop in yield can increase our cost to manufacture our IFCs or, in more severe cases, require us to halt the manufacture of our

27

Table of Contents

IFCs until the problem is resolved. Identifying and resolving the cause of a drop in yield can require substantial time and resources.
In addition, developing an IFC for a new application may require developing a specific production process for that type of IFC. While all of our IFCs are produced using the same basic processes, significant variations may be required to ensure adequate yield of any particular type of IFC. Developing such a process can be very time consuming, and any unexpected difficulty in doing so can delay the introduction of a product.
Our products could become subject to regulation as medical devices by the U.S. Food and Drug Administration, or FDA, or other regulatory agencies in the future.
Our products are currently labeled and sold to academic institutions, life sciences laboratories, and pharmaceutical, biotechnology, and Ag-Bio companies for research purposes only, and not as diagnostic tests or medical devices. As products labeled for research use only, and used by our customers for research purposes only, they are subject only to limited regulation as medical devices by the FDA under 21 Code of Federal Regulations Section 809.10(c) with respect to their labeling. Research use only products are not currently subject to regulation as medical devices by comparable agencies of other countries. However, if we change the labeling of our products in the future to include indications for human diagnostic applications or medical uses, or we have knowledge that our customers are using our products for diagnostic purposes, our products or related applications could be subject to additional regulation as in vitro diagnostic devices, such as under the FDA’s pre- and post-market regulations for medical devices. For example, if we wish to label and market our products for use in performing clinical diagnostics, we would first need to obtain FDA pre-market clearance or approval (depending on any product’s specific intended use and any such modified labeling claims), unless otherwise exempt from clearance or approval requirements. Obtaining FDA clearance or approval can be expensive and uncertain, and generally takes several months to years to obtain, and may require detailed and comprehensive scientific and clinical data. Notwithstanding the expense, these efforts may never result in FDA clearance or approval. Even if we were to obtain regulatory approval or clearance, it may not be for the uses we believe are important or commercially attractive.
Further, the FDA may expand its jurisdiction over our products or the products of our customers, which could impose restrictions on our ability to market and sell our products. For example, our customers may elect to use our research use only labeled products in their own laboratory developed tests, or LDTs, for clinical diagnostic use. The FDA has historically exercised enforcement discretion in not enforcing the medical device regulations against LDTs. However, the FDA could assert jurisdiction over some or all LDTs, which may impact our customers’ uses of our products. A significant change in the way that the FDA regulates our products or any LDTs that our customers develop may require us to change our business model in order to maintain compliance with these laws. The FDA held a meeting in July 2010, during which it indicated that it intends to reconsider its policy of enforcement discretion and to begin drafting a new oversight framework for LDTs. Recent comments by FDA Commissioner Margaret Hamburg indicate that the FDA is working on a new risk-based framework to regulate LDTs.
Additionally, in June 2011, the FDA issued a draft guidance document intended to clarify the types of in vitro diagnostic products that are properly labeled “for research use only.” The draft guidance states that merely including a labeling statement that the product is for research purposes only will not necessarily render the device exempt from the FDA’s clearance, approval, or other requirements if the circumstances surrounding the distribution of the product indicate that the manufacturer knows its product is, or intends for its product to be, offered for clinical diagnostic uses. These circumstances may include written or verbal marketing claims regarding a product’s performance in clinical applications and a manufacturer’s provision of technical support for clinical applications. If the FDA imposes significant changes to the regulation of LDTs, or modifies its approach to our products labeled for research use only, but which may be used by our customers for clinical use, it could reduce our revenue or increase our costs and adversely affect our business, prospects, results of operations or financial condition.
We may be required to proactively achieve compliance with certain FDA regulations and to conform our manufacturing operations to the FDA’s good manufacturing practice regulations for medical devices, known as the Quality System Regulation, or QSR, as part of our contracts with customers or as part of our collaborations with third parties. In addition, we may voluntarily seek to conform our manufacturing operations to the QSR. For clinical diagnostic products that are regulated as medical devices, the FDA enforces the QSR through periodic unannounced inspections of registered manufacturing facilities. If we are required to comply with the QSR, the failure to take satisfactory corrective action in response to an adverse QSR inspection could result in enforcement actions, including a public warning letter, a shutdown of manufacturing operations, a product recall, civil or criminal penalties or other sanctions, which could in turn cause our sales and business to suffer.
If we are unable to recruit and retain key executives, scientists and technical support personnel, we may be unable to achieve our goals.
Our performance is substantially dependent on the performance of our senior management, particularly Gajus V. Worthington, our president and chief executive officer. Additionally, to expand our research and product development efforts, we

28

Table of Contents

need key scientists skilled in areas such as molecular and cellular biology, assay development, and manufacturing. We also need highly trained technical support personnel with the necessary scientific background and ability to understand our systems at a technical level to effectively support potential new customers and the expanding needs of current customers. Competition for these people is intense. Because of the complex and technical nature of our systems and the dynamic market in which we compete, any failure to attract and retain a sufficient number of qualified employees could materially harm our ability to develop and commercialize our technology.
The loss of the services of any member of our senior management or our scientific or technical support staff might significantly delay or prevent the development of our products or achievement of other business objectives by diverting management’s attention to transition matters and identification of suitable replacements, if any, and could have a material adverse effect on our business. In addition, our research and product development efforts could be delayed or curtailed if we are unable to attract, train and retain highly skilled employees, particularly, senior scientists and engineers. We do not maintain fixed term employment contracts or significant key man life insurance with any of our employees.
If we are unable to integrate future acquisitions successfully, our operating results and prospects could be harmed.
In the future, we may make acquisitions to improve our product offerings or expand into new markets. Our future acquisition strategy will depend on our ability to identify, negotiate, complete, and integrate acquisitions and, if necessary, to obtain satisfactory debt or equity financing to fund those acquisitions. Mergers and acquisitions are inherently risky, and any transaction we complete may not be successful. Any merger or acquisition we may pursue would involve numerous risks, including but not limited to the following:
difficulties in integrating and managing the operations, technologies, and products of the companies we acquire;
diversion of our management’s attention from normal daily operation of our business;
our inability to maintain the key business relationships and the reputations of the businesses we acquire;
our inability to retain key personnel of the acquired company;
uncertainty of entry into markets in which we have limited or no prior experience and in which competitors have stronger market positions;
our dependence on unfamiliar affiliates and customers of the companies we acquire;
insufficient revenue to offset our increased expenses associated with acquisitions;
our responsibility for the liabilities of the businesses we acquire, including those which we may not anticipate; and
our inability to maintain internal standards, controls, procedures, and policies.
We may be unable to secure the equity or debt funding necessary to finance future acquisitions on terms that are acceptable to us. If we finance acquisitions by issuing equity or convertible debt securities, our existing stockholders will likely experience dilution, and if we finance future acquisitions with debt funding, we will incur interest expense and may have to comply with financial covenants and secure that debt obligation with our assets.
Adverse conditions in the global economy and disruption of financial markets may significantly harm our revenue, profitability, and results of operations.
The global credit and financial markets have been experiencing volatility and disruptions, including diminished liquidity and credit availability, increased concerns about inflation and deflation, and the downgrade of U.S. debt and exposure risks on other sovereign debts, decreased consumer confidence, lower economic growth, volatile energy costs, increased unemployment rates, and uncertainty about economic stability. Volatility and disruption of financial markets could limit our customers’ ability to obtain adequate financing or credit to purchase and pay for our products in a timely manner or to maintain operations, which could result in a decrease in sales volume that could harm our results of operations. General concerns about the fundamental soundness of domestic and international economies may also cause our customers to reduce their purchases. Changes in governmental banking, monetary, and fiscal policies to address liquidity and increase credit availability may not be effective. Significant government investment and allocation of resources to assist the economic recovery of sectors which do not include our customers may reduce the resources available for government grants and related funding for life science, Ag-Bio, and clinical research and development. Continuation or further deterioration of these financial and macroeconomic conditions could significantly harm our sales, profitability, and results of operations.

29

Table of Contents

We generate a substantial portion of our revenue internationally and are subject to various risks relating to such international activities, which could adversely affect our sales and operating performance. In addition, any disruption or delay in the shipping or off-loading of our products, whether domestically or internationally, may have an adverse effect on our financial condition and results of operations.
During the nine months ended September 30, 2013 and the years 2012, 2011, and 2010, approximately 45%, 47%, 47%, and 45%, respectively, of our product revenue was generated from sales to customers located outside of the United States. We believe that a significant percentage of our future revenue will come from international sources as we expand our overseas operations and develop opportunities in other international areas. Engaging in international business inherently involves a number of difficulties and risks, including:
required compliance with existing and changing foreign regulatory requirements and laws;
required compliance with anti-bribery laws, such as the U.S. Foreign Corrupt Practices Act and U.K. Bribery Act, data privacy requirements, labor laws, and anti-competition regulations;
export or import restrictions;
laws and business practices favoring local companies;
longer payment cycles and difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;
unstable economic, political, and regulatory conditions;
potentially adverse tax consequences, tariffs, customs charges, bureaucratic requirements, and other trade barriers;
difficulties and costs of staffing and managing foreign operations; and
difficulties protecting or procuring intellectual property rights.
If one or more of these risks occurs, it could require us to dedicate significant resources to remedy, and if we are unsuccessful in finding a solution, our financial results will suffer.
In addition, a majority of our product sales are currently denominated in U.S. dollars and fluctuations in the value of the U.S. dollar relative to foreign currencies could decrease demand for our products and adversely impact our financial performance. For example, if the value of the U.S. dollar increases relative to foreign currencies, our products could become more costly to the international consumer and therefore less competitive in international markets, or if the value of the U.S. dollar decreases relative to the Singapore dollar, it would become more costly in U.S. dollars for us to manufacture our products in Singapore.
We rely on shipping providers to deliver products to our customers globally. Labor, tariff or World Trade Organization-related disputes, piracy, physical damage to shipping facilities or equipment caused by severe weather or terrorist incidents, congestion at shipping facilities, inadequate equipment to load, dock, and offload our products, energy-related tie-ups, or other factors could disrupt or delay shipping or off-loading of our products domestically and internationally. Such disruptions or delays may have an adverse effect on our financial condition and results of operations.
If we are unable to manage our anticipated growth effectively, our business could be harmed.
The rapid growth of our business has placed a significant strain on our managerial, operational, and financial resources and systems. To execute our anticipated growth successfully, we must continue to attract and retain qualified personnel and manage and train them effectively. We must also upgrade our internal business processes and capabilities to create the scalability that a growing business demands.
We believe our facilities located in Singapore and South San Francisco, California, are sufficient to meet our short-term manufacturing needs. The current leases for our facilities in Singapore expire at various times through August 2016 and our current lease for office and laboratory space at our headquarters in South San Francisco expires in April 2020. In order to meet long-term demand for our microfluidic systems, we believe that we will need to add to our existing manufacturing space in Singapore or move all of our manufacturing facilities to a new location in Singapore in 2014. On October 14, 2013, Fluidigm Singapore accepted an offer of tenancy relating to the lease of a new manufacturing facility in Singapore, which expires on June 1, 2022. We expect to consolidate our manufacturing operations in the new space in the third quarter of 2014. Such a move will involve significant expense in connection with the establishment of new clean rooms, the movement and installation of key manufacturing equipment, and qualification of our new facility, and we cannot assure you that such a move would not delay or otherwise adversely affect our manufacturing activities. If our ability to utilize the new facility for manufacturing operations is delayed, we may not be able to meet long-term demand for our microfluidic systems, which could adversely impact our business. We cannot provide assurances that we will be able to secure a lease on a different manufacturing facility on acceptable terms and on a timely basis, if at all, to meet our future manufacturing needs.

30

Table of Contents


Further, our anticipated growth will place additional strain on our suppliers and manufacturing facilities, resulting in an increased need for us to carefully monitor quality assurance. Any failure by us to manage our growth effectively could have an adverse effect on our ability to achieve our development and commercialization goals.
Our products could have unknown defects or errors, which may give rise to claims against us, adversely affect market adoption of our systems, and adversely affect our business, financial condition, and results of operations.
Our microfluidic systems utilize novel and complex technology applied on a nanoliter scale and such systems may develop or contain undetected defects or errors. We cannot assure you that material performance problems, defects, or errors will not arise, and as we increase the density and integration of our microfluidic systems, these risks may increase. We generally provide warranties that our microfluidic systems will meet performance expectations and will be free from defects. We also provide warranties relating to other parts of our microfluidic systems. The costs incurred in correcting any defects or errors may be substantial and could adversely affect our operating margins.
In manufacturing our products, including our systems, IFCs, and assays, we depend upon third parties for the supply of various components, many of which require a significant degree of technical expertise to produce. In addition, we purchase certain products from third-party suppliers for resale. If our suppliers fail to produce components to specification or provide defective products to us for resale and our quality control tests and procedures fail to detect such errors or defects, or if we or our suppliers use defective materials or workmanship in the manufacturing process, the reliability and performance of our products will be compromised.
If our products contain defects, we may experience:
a failure to achieve market acceptance or expansion of our product sales;
loss of customer orders and delay in order fulfillment;
damage to our brand reputation;
increased cost of our warranty program due to product repair or replacement;
product recalls or replacements;
inability to attract new customers;
diversion of resources from our manufacturing and research and development departments into our service department; and

legal claims against us, including product liability claims, which could be costly and time consuming to defend and result in substantial damages.
In addition, certain of our products are marketed for use with products sold by third parties. For example, our Access Array System is marketed as compatible with all major next-generation DNA sequencing instruments. If such third-party products are not produced to specification, are produced in accordance with modified specifications, or are defective, they may not be compatible with our products. In such case, the reliability and performance of our products may be compromised.
The occurrence of any one or more of the foregoing could negatively affect our business, financial condition, and results of operations.
To use our products, and our BioMark System in particular, customers typically need to purchase specialized reagents. Any interruption in the availability of these reagents for use in our products could limit our ability to market our products.
Our products, and our BioMark System in particular, must be used in conjunction with one or more reagents designed to produce or facilitate the particular biological or chemical reaction desired by the user. Many of these reagents are highly specialized and available to the user only from a single supplier or a limited number of suppliers. Although we sell reagents for use with certain of our products, our customers may purchase these reagents directly from third-party suppliers, and we have no control over the supply of those materials. In addition, our products are designed to work with these reagents as they are currently formulated. We have no control over the formulation of reagents sold by third-party suppliers, and the performance of our products might be adversely affected if the formulation of these reagents is changed. If one or more of these reagents were to become unavailable or were reformulated, our ability to market and sell our products could be materially and adversely affected.

In addition, the use of a reagent for a particular process may be covered by one or more patents relating to the reagent itself, the use of the reagent for the particular process, the performance of that process, or the equipment required to perform the

31

Table of Contents

process. Typically, reagent suppliers, who are either the patent holders or their authorized licensees, sell the reagents along with a license or covenant not to sue with respect to such patents. The license accompanying the sale of a reagent often purports to restrict the purposes for which the reagent may be used. If a patent holder or authorized licensee were to assert against us or our customers that the license or covenant relating to a reagent precluded its use with our systems, our ability to sell and market our products could be materially and adversely affected. For example, our BioMark System involves real-time quantitative PCR, or qPCR. Leading suppliers of reagents for real-time qPCR reactions include Life Technologies Corporation and Roche Applied Science, who are our direct competitors, and their licensees. These real-time qPCR reagents are typically sold pursuant to limited licenses or covenants not to sue with respect to patents held by these companies. We do not have any contractual supply agreements for these real-time qPCR reagents, and we cannot assure you that these reagents will continue to be available to our customers for use with our systems, or that these patent holders will not seek to enforce their patents against us, our customers, or suppliers.
We have limited experience in marketing, selling, and distributing our products, and if we are unable to expand our direct sales and marketing force or distribution capabilities to adequately address our customers’ needs, our business may be adversely affected.
We have limited experience in marketing, selling, and distributing our products. Our BioMark and EP1 Systems for genomic analysis were introduced for commercial sale in 2006 and 2008, respectively; our Access Array System for sample preparation was introduced for commercial sale in 2009; our BioMark HD System for genomic analysis was introduced for commercial sale in 2011; we began producing and selling assays for use with our IFCs in May 2011; and we launched our C1 Single-Cell Auto Prep System for single cell sample preparation in June 2012. We may not be able to market, sell, and distribute our products effectively enough to support our planned growth. We sell our products primarily through our own sales force and through distributors in certain territories. Our future sales will depend in large part on our ability to develop and substantially expand our direct sales force and to increase the scope of our marketing efforts. Our products are technically complex and used for highly specialized applications. As a result, we believe it is necessary to develop a direct sales force that includes people with specific scientific backgrounds and expertise, and a marketing group with technical sophistication. Competition for such employees is intense. We may not be able to attract and retain personnel or be able to build an efficient and effective sales and marketing force, which could negatively impact sales of our products and reduce our revenue and profitability.
In addition, we may continue to enlist one or more sales representatives and distributors to assist with sales, distribution, and customer support globally or in certain regions of the world. If we do seek to enter into such arrangements, we may not be successful in attracting desirable sales representatives and distributors, or we may not be able to enter into such arrangements on favorable terms. If our sales and marketing efforts, or those of any third-party sales representatives and distributors, are not successful, our technologies and products may not gain market acceptance, which would materially and adversely impact our business operations.
If we fail to maintain effective internal control over financial reporting in the future, the accuracy and timing of our financial reporting may be impaired, which could adversely affect our business and our stock price.
The Sarbanes-Oxley Act requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we must perform system and process evaluation and testing of our internal control over financial reporting to allow management to report on the effectiveness of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. Our testing may reveal deficiencies in our internal control over financial reporting that are deemed to be material weaknesses. Our compliance with Section 404 will require that we incur substantial accounting expense and expend significant management time on compliance-related issues. We currently do not have an internal audit group and we will evaluate the need to hire additional accounting and financial staff with appropriate public company experience and technical accounting knowledge. Moreover, if we are not able to comply with the requirements of Section 404 in a timely manner, or if we or our independent registered public accounting firm identify deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, the market price of our stock could decline and we could be subject to sanctions or investigations by the NASDAQ Global Market, or NASDAQ, the SEC or other regulatory authorities, which would require additional financial and management resources.
Risks associated with a company-wide implementation of an enterprise resource planning, or ERP, system may adversely affect our business and results of operations or the effectiveness of internal control over financial reporting.
We have been implementing a company-wide ERP system to handle the business and financial processes within our operations and corporate functions. ERP implementations are complex and time-consuming projects that involve substantial expenditures on system software and implementation activities that can continue for several years. ERP implementations also require transformation of business and financial processes in order to reap the benefits of the ERP system. Our business and
results of operations may be adversely affected if we experience operating problems and/or cost overruns during the ERP implementation process, or if the ERP system and the associated process changes do not give rise to the benefits that we expect.

32

Table of Contents

Additionally, if we do not effectively implement the ERP system as planned or if the system does not operate as intended, it could adversely affect the effectiveness of our internal controls over financial reporting.
Our future capital needs are uncertain and we may need to raise additional funds in the future, which may cause dilution to stockholders or may be upon terms that are not favorable to us.
We believe that our existing cash and cash equivalents will be sufficient to meet our anticipated cash requirements for at least the next 18 months. However, we may need to raise substantial additional capital for various purposes, including:
expanding the commercialization of our products;
funding our operations;
furthering our research and development; and
acquiring other businesses or assets and licensing technologies.
Our future funding requirements will depend on many factors, including:
market acceptance of our products;
the cost of our research and development activities;
the cost of filing and prosecuting patent applications;
the cost of defending, in litigation or otherwise, any claims that we infringe third-party patents or violate other intellectual property rights;
the cost and timing of regulatory clearances or approvals, if any;
the cost and timing of establishing additional sales, marketing, and distribution capabilities;
the cost and timing of establishing additional technical support capabilities;
the effect of competing technological and market developments; and
the extent to which we acquire or invest in businesses, products, and technologies, although we currently have no commitments or agreements relating to any of these types of transactions.
We cannot assure you that we will be able to obtain additional funds on acceptable terms, or at all. If we raise additional funds by issuing equity securities, our stockholders may experience dilution. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt or additional equity financing that we raise may contain terms that are not favorable to us or our stockholders. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or our products, or grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to liquidate some or all of our assets, delay development or commercialization of our products, or license to third parties the rights to commercialize products or technologies that we would otherwise seek to commercialize. We also may have to reduce marketing, customer support, or other resources devoted to our products, or cease operations. Any of these factors could harm our operating results.
Our ability to use net operating losses to offset future taxable income may be subject to certain limitations.
In general, under Section 382 of the Internal Revenue Code, a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its pre-change net operating losses, or NOLs, to offset future taxable income. If we undergo ownership changes, our ability to utilize NOLs could be limited by Section 382 of the Internal Revenue Code. Future changes in our stock ownership, some of which are outside of our control, could result in an ownership change under Section 382 of the Internal Revenue Code.
Risks Related to Intellectual Property
Our ability to protect our intellectual property and proprietary technology through patents and other means is uncertain.
Our commercial success depends in part on our ability to protect our intellectual property and proprietary technologies. We rely on patent protection, where appropriate and available, as well as a combination of copyright, trade secret, and trademark laws, and nondisclosure, confidentiality, and other contractual restrictions to protect our proprietary technology. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. We apply for patents covering our products and technologies and uses thereof, as we deem appropriate. However, we may fail to apply for patents on important products and technologies in a timely fashion or at all. Our pending U.S. and foreign patent applications may not issue as patents or may not issue in a form that will be sufficient to protect our proprietary technology

33

Table of Contents

and gain or keep our competitive advantage. Any patents we have obtained or do obtain may be subject to re-examination, reissue, opposition, or other administrative proceeding, or may be challenged in litigation, and such challenges could result in a determination that the patent is invalid or unenforceable. In addition, competitors may be able to design alternative methods or devices that avoid infringement of our patents. Both the patent application process and the process of managing patent disputes can be time consuming and expensive.
Furthermore, the laws of some foreign countries may not protect our intellectual property rights to the same extent as do the laws of the United States, and many companies have encountered significant problems in protecting and defending such rights in foreign jurisdictions. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial cost and divert our efforts and attention from other aspects of our business. Changes in either the patent laws or in interpretations of patent laws in the United States or other countries may diminish the value of our intellectual property. We cannot predict the breadth of claims that may be allowed or enforced in our patents or in third-party patents. For example:
We might not have been the first to make the inventions covered by each of our pending patent applications;
We might not have been the first to file patent applications for these inventions;
The patents of others may have an adverse effect on our business; and
Others may independently develop similar or alternative products and technologies or duplicate any of our products and technologies.
To the extent our intellectual property, including licensed intellectual property, offers inadequate protection, or is found to be invalid or unenforceable, our competitive position and our business could be adversely affected.
We may be involved in lawsuits to protect or enforce our patents and proprietary rights, to determine the scope, coverage, and validity of others’ proprietary rights, or to defend against third party claims of intellectual property infringement, any of which could be time-intensive and costly and may adversely impact our business or stock price.
Litigation may be necessary for us to enforce our patent and proprietary rights, determine the scope, coverage, and validity of others’ proprietary rights, and/or defend against third party claims of intellectual property infringement against us as well as against our suppliers, distributors, customers, and other entities with whom we do business. Litigation could result in substantial legal fees and could adversely affect the scope of our patent protection. The outcome of any litigation or other proceeding is inherently uncertain and might not be favorable to us, and we might not be able to obtain licenses to technology that we require. Even if such licenses are obtainable, they may not be available at a reasonable cost. We could therefore incur substantial costs related to royalty payments for licenses obtained from third parties, which could negatively affect our gross margins. Further, we could encounter delays in product introductions, or interruptions in product sales, as we develop alternative methods or products.
As we move into new markets and applications for our products, incumbent participants in such markets may assert their patents and other proprietary rights against us as a means of impeding our entry into such markets or as a means to extract substantial license and royalty payments from us. Our commercial success may depend in part on our non-infringement of the patents or proprietary rights of third parties. Numerous significant intellectual property issues have been litigated, and will likely continue to be litigated, between existing and new participants in our existing and targeted markets. For example, some of our products provide for the testing and analysis of genetic material, and patent rights relating to genetic materials remain a developing area of patent law. A recent U.S. Supreme Court decision held, among other things, that claims to isolated genomic DNA occurring in nature are not patent eligible, while claims relating to synthetic DNA may be patent eligible. We expect the ruling will result in additional litigation in our industry. In addition, third parties may assert that we are employing their proprietary technology without authorization. For example, on June 4, 2008 we received a letter from Applied Biosystems, Inc., a wholly-owned subsidiary of Life Technologies Corporation (collectively referred to as Life), asserting that our BioMark System for gene expression analysis infringes upon U.S. Patent No. 6,814,934, or the ‘934 patent, and its foreign counterparts in Europe and Canada. In June 2011, we resolved this dispute by entering into license agreements with Life which, among other matters, granted us a non-exclusive license to the ‘934 patent and its foreign counterparts.
Our customers have been sued for various claims of intellectual property infringement in the past, and we expect that our customers will be involved in additional litigation in the future. In particular, our customers may become subject to lawsuits claiming that their use of our products infringes third-party patent rights, and we could become subject to claims that we contributed to or induced our customer’s infringement. In addition, our agreements with some of our suppliers, distributors, customers, and other entities with whom we do business may require us to defend or indemnify these parties to the extent they become involved in infringement claims against us, including the claims described above. We could also voluntarily agree to defend or indemnify third parties in instances where we are not obligated to do so if we determine it would be important to our business relationships. If we are required or agree to defend or indemnify any of these third parties in connection with any infringement claims, we could incur significant costs and expenses that could adversely affect our business, operating results, or financial condition.

34

Table of Contents


We depend on certain technologies that are licensed to us. We do not control these technologies and any loss of our rights to them could prevent us from selling our products, which would have an adverse effect on our business.
We rely on licenses in order to be able to use various proprietary technologies that are material to our business, including our core IFC and multi-layer soft lithography technologies. In some cases, we do not control the prosecution, maintenance, or filing of the patents to which we hold licenses, or the enforcement of these patents against third parties.
Our rights to use the technology we license are subject to the negotiation and continuation of those licenses. Certain of our licenses contain provisions that allow the licensor to terminate the license upon specific conditions. Our rights under the licenses are subject to our continued compliance with the terms of the license, including the payment of royalties due under the license. Because of the complexity of our products and the patents we have licensed, determining the scope of the license and related royalty obligation can be difficult and can lead to disputes between us and the licensor. An unfavorable resolution of such a dispute could lead to an increase in the royalties payable pursuant to the license. If a licensor believed we were not paying the royalties due under the license or were otherwise not in compliance with the terms of the license, the licensor might attempt to revoke the license. If such an attempt were successful and the license is terminated, we might be barred from marketing, producing, and selling some or all of our products, which would have an adverse effect on our business. For example, pursuant to the terms of a license agreement entered into with Life in June 2011, we are obligated to make a $1.0 million payment to Life upon satisfaction of certain conditions. On October 16, 2013, Life provided notice that the $1.0 million payment is due and payable under the license agreement. We believe that at least one of the conditions of the milestone payment remains unmet and intend to dispute Life’s claim to the contingent payment. However, if the matter is not resolved in our favor, our license to certain Life patent filings under the agreement could terminate, subjecting our relevant product lines to risks associated with patent infringement litigation.
We are subject to certain manufacturing restrictions related to licensed technologies that were developed with the financial assistance of U.S. governmental grants.
We are subject to certain U.S. government regulations because we have licensed technologies that were developed with U.S. government grants. In accordance with these regulations, these licenses provide that products embodying the technologies are subject to domestic manufacturing requirements. If this domestic manufacturing requirement is not met, the government agency that funded the relevant grant is entitled to exercise specified rights, referred to as “march-in rights”, which if exercised would allow the government agency to require the licensors or us to grant a non-exclusive, partially exclusive, or exclusive license in any field of use to a third party designated by such agency. All of our microfluidic systems revenue is dependent upon the availability of our IFCs, which incorporate technology developed with U.S. government grants. All of our instruments, including microfluidic systems, and IFCs for commercial sale are manufactured at our facility in Singapore. The federal regulations allow the funding government agency to grant, at the request of the licensors of such technology, a waiver of the domestic manufacturing requirement. Waivers may be requested prior to any government notification. We have assisted the licensors of these technologies with the analysis of the domestic manufacturing requirement, and, in December 2008, one of the licensors applied for a waiver of the domestic manufacturing requirement with respect to certain patents. In July 2009, the funding government agency granted the requested waiver of the domestic manufacturing requirement for a three-year period commencing in July 2009. In June 2012, the licensors requested a continued waiver of the domestic manufacturing requirement with respect to the relevant patents. If in the future it were to be determined that we are in violation of the domestic manufacturing requirement and additional waivers of such requirement were either not requested or not granted, then the U.S. government could exercise its march-in rights. In addition, these licenses contain provisions relating to compliance with this domestic manufacturing requirement. If it were determined that we are not in compliance with these provisions and such non-compliance constituted a material breach of the licenses, the licenses could be terminated. Either the exercise of march-in rights or the termination of one or more of our licenses could materially adversely affect our business, operations and financial condition.
We may be subject to damages resulting from claims that we or our employees have wrongfully used or disclosed alleged trade secrets of our employees’ former employers.
Many of our employees were previously employed at universities or other life science or Ag-Bio companies, including our competitors or potential competitors. Although no claims against us are currently pending, we may be subject to claims that these employees or we have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. Litigation may be necessary to defend against these claims. If we fail in defending such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights. A loss of key research personnel work product could hamper or prevent our ability to commercialize certain potential products, which could severely harm our business. Even if we are successful in defending against these claims, litigation could result in substantial costs and be a distraction to management.

35

Table of Contents

Risks Related to Our Common Stock
Our stock price may fluctuate significantly, particularly if holders of substantial amounts of our stock attempt to sell, and holders may have difficulty selling their shares based on current trading volumes of our stock. In addition, numerous other factors could result in substantial volatility in the trading price of our stock.
Our stock is currently traded on NASDAQ, but we can provide no assurance that we will be able to maintain an active trading market on NASDAQ or any other exchange in the future. The trading volume of our stock tends to be low relative to our total outstanding shares, and we have several stockholders, including affiliated stockholders, who hold substantial blocks
of our stock. As of September 30, 2013, we had 25,590,797 shares of common stock outstanding, and stockholders holding at least 5% of our stock, individually or with affiliated persons or entities, collectively beneficially owned or controlled approximately 51% of such shares. Sales of large numbers of shares by any of our large stockholders could adversely affect our trading price, particularly given our relatively small historic trading volumes. If stockholders holding shares of our common stock sell, indicate an intention to sell, or if it is perceived that they will sell, substantial amounts of their common stock in the public market, the trading price of our common stock could decline. Moreover, if there is no active trading market or if the volume of trading is limited, holders of our common stock may have difficulty selling their shares.
In addition, the trading price of our common stock may be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. These factors include:
actual or anticipated quarterly variation in our results of operations or the results of our competitors;
announcements or communications by us or our competitors relating to, among other things, new commercial products, technological advances, significant contracts, commercial relationships, capital commitments, acquisitions or sales of businesses, and/or misperceptions in or speculation by the market regarding such announcements or communications;
issuance of new or changed securities analysts’ reports or recommendations for our stock;
developments or disputes concerning our intellectual property or other proprietary rights;
commencement of, or our involvement in, litigation;
market conditions in the life science, Ag-Bio, and clinical research sectors;
failure to complete significant sales;
manufacturing disruptions that could occur if we were unable to successfully expand our production in our current or an alternative facility;
any future sales of our common stock or other securities in connection with raising additional capital or otherwise;
any major change to the composition of our board of directors or management; and
general economic conditions and slow or negative growth of our markets.
The stock market in general, and market prices for the securities of technology-based companies like ours in particular, have from time to time experienced volatility that often has been unrelated to the operating performance of the underlying companies. These broad market and industry fluctuations may adversely affect the market price of our common stock, regardless of our operating performance. In several recent situations where the market price of a stock has been volatile, holders of that stock have instituted securities class action litigation against the company that issued the stock. If any of our stockholders were to bring a lawsuit against us, the defense and disposition of the lawsuit could be costly and divert the time and attention of our management and harm our operating results.
If securities or industry analysts publish unfavorable research about our business or cease to cover our business, our stock price and trading volume could decline.
The trading market for our common stock may rely, in part, on the research and reports that equity research analysts publish about us and our business. We do not have any control of the analysts or the content and opinions included in their reports. The price of our stock could decline if one or more equity research analysts downgrade our stock or issue other unfavorable commentary or research. If one or more equity research analysts ceases coverage of our company or fails to publish reports on us regularly, demand for our stock could decrease, which in turn could cause our stock price or trading volume to decline.
Our directors, executive officers, and large stockholders have substantial control over and could limit your ability to influence the outcome of key transactions, including changes of control.
As of September 30, 2013, our current executive officers, directors, stockholders holding at least 5% of our outstanding stock, and their respective affiliates, collectively beneficially owned or controlled approximately 55% of the outstanding shares of

36

Table of Contents

our common stock. Accordingly, these executive officers, directors, large stockholders, and their respective affiliates, acting as a group, can have substantial influence over the outcome of corporate actions requiring stockholder approval, including the election of directors, any merger, consolidation or sale of all or substantially all of our assets, or any other significant corporate transactions. These stockholders may also delay or prevent a change of control of us, even if such a change of control would benefit our other stockholders. The significant concentration of stock ownership may adversely affect the trading price of our common stock due to investors’ perception that conflicts of interest may exist or arise.

Anti-takeover provisions in our charter documents and under Delaware law could make an acquisition of us, which may be beneficial to our stockholders, more difficult and may prevent attempts by our stockholders to replace or remove our current management and limit the market price of our common stock.
Provisions in our certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our management, including provisions that:
authorize our board of directors to issue, without further action by the stockholders, up to 10,000,000 shares of undesignated preferred stock;
require that any action to be taken by our stockholders be effected at a duly called annual or special meeting and not by written consent;
specify that special meetings of our stockholders can be called only by our board of directors, the chairman of the board, the chief executive officer or the president;
establish an advance notice procedure for stockholder approvals to be brought before an annual meeting of our stockholders, including proposed nominations of persons for election to our board of directors;
establish that our board of directors is divided into three classes, Class I, Class II, and Class III, with each class serving staggered three year terms;
provide that our directors may be removed only for cause;
provide that vacancies on our board of directors may be filled only by a majority of directors then in office, even though less than a quorum;
specify that no stockholder is permitted to cumulate votes at any election of directors; and
require a super-majority of votes to amend certain of the above-mentioned provisions.
These provisions may frustrate or prevent any attempts by our stockholders to replace or remove our current management by making it more difficult for stockholders to replace members of our board of directors, which is responsible for appointing the members of our management. In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which limits the ability of stockholders owning in excess of 15% of our outstanding voting stock to merge or combine with us.
We have never paid dividends on our capital stock, and we do not anticipate paying any cash dividends in the foreseeable future.
We have paid no cash dividends on any of our classes of capital stock to date, have contractual restrictions against paying cash dividends, and currently intend to retain our future earnings to fund the development and growth of our business. As a result, capital appreciation, if any, of our common stock will be stockholders’ sole source of gain for the foreseeable future.

37

Table of Contents

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.
Use of Proceeds
On February 9, 2011, our registration statement on Form S-1 (File No. 333-170965) was declared effective for the initial public offering of our common stock, or IPO. Through September 30, 2013, the net proceeds from our IPO have been applied as follows: $5.0 million for the repayment of promissory notes issued in January 2011, $5.0 million for the repayment of our bank line of credit, $43.3 million for research and development expenses, $10.2 million for general corporate purposes including selling, general and administrative expenses, and litigation settlement expense, and $5.7 million for capital expenditures. On June 30, 2011, we paid $3.0 million in connection with the settlement of certain patent litigation with Life Technologies Corporation, or Life. In July 2011, we paid Life an additional $2.0 million in connection with our exercise of an option under the terms of our agreements with Life to limit or preclude certain patent litigation between the parties over a period of two to four years. Other than the aggregate payment of $5.0 million to Life, there has been no material change in the planned use of proceeds from our IPO from that described in the final prospectus filed with the SEC pursuant to Rule 424(b) on February 10, 2011.

38

Table of Contents

Item 6. Exhibits.
 
Exhibit
Number
 
Description
  
Incorporated by
Reference From
Form
  
Incorporated
by Reference
From
Exhibit
Number
  
Date
Filed
 
 
 
 
 
 
 
 
 
 
31.1
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 of President and Chief Executive Officer
  
Filed herewith
  
 
  
 
 
 
 
 
 
31.2
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 of Chief Financial Officer
  
Filed herewith
  
 
  
 
 
 
 
 
 
32.1(1)
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 of President and Chief Executive Officer
  
Furnished herewith
  
 
  
 
 
 
 
 
 
32.2(1)
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 of Chief Financial Officer
  
Furnished herewith
  
 
  
 
 
 
 
 
 
101.INS
 
XBRL Instance Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Document
  
Filed herewith
  
 
  
 
 
(1)
In accordance with Item 601(b)(32)(ii) of Regulation S-K and SEC Release No. 33-8238 and 34-47986, Final Rule: Management’s Reports on Internal Control Over Financial Reporting and Certification of Disclosure in Exchange Act Periodic Reports, the certifications furnished in Exhibits 32.1 and 32.2 hereto are deemed to accompany this Form 10-Q and will not be deemed “filed” for purposes of Section 18 of the Exchange Act. Such certifications will not be deemed to be incorporated by reference into any filings under the Securities Act or the Exchange Act, except to the extent that the registrant specifically incorporates it by reference.


39

Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
FLUIDIGM CORPORATION
 
 
 
Dated: November 7, 2013
By:
 
/s/ Gajus V. Worthington
 
 
 
Gajus V. Worthington
 
 
 
President and Chief Executive Officer
 
 
 
Dated: November 7, 2013
By:
 
/s/ Vikram Jog
 
 
 
Vikram Jog
 
 
 
Chief Financial Officer

40

Table of Contents

EXHIBIT LIST
Exhibit
Number
 
Description
  
Incorporated by
Reference From
Form
  
Incorporated
by Reference
From
Exhibit
Number
  
Date
Filed
 
 
 
 
 
31.1
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 of President and Chief Executive Officer
  
Filed herewith
  
 
  
 
 
 
 
 
 
31.2
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 of Chief Financial Officer
  
Filed herewith
  
 
  
 
 
 
 
 
 
32.1(1)
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 of President and Chief Executive Officer
  
Furnished herewith
  
 
  
 
 
 
 
 
 
32.2(1)
 
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 of Chief Financial Officer
  
Furnished herewith
  
 
  
 
 
 
 
 
 
101.INS
 
XBRL Instance Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document
  
Filed herewith
  
 
  
 
 
 
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Document
  
Filed herewith
  
 
  
 
 
(1)
In accordance with Item 601(b)(32)(ii) of Regulation S-K and SEC Release No. 33-8238 and 34-47986, Final Rule: Management’s Reports on Internal Control Over Financial Reporting and Certification of Disclosure in Exchange Act Periodic Reports, the certifications furnished in Exhibits 32.1 and 32.2 hereto are deemed to accompany this Form 10-Q and will not be deemed “filed” for purposes of Section 18 of the Exchange Act. Such certifications will not be deemed to be incorporated by reference into any filings under the Securities Act or the Exchange Act, except to the extent that the registrant specifically incorporates it by reference.


41