UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

 

Form 10-K

 

 

Commission file number 000-27687

BSQUARE CORPORATION

(Exact name of registrant as specified in its charter)

 

 

110 110^th Avenue NE, Suite 200, Bellevue, Washington 98004
(Address of principal executive offices)

 

(425) 519-5900
(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o     No þ

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act.  Yes o     No þ

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer o     Accelerated filer o     Non-accelerated filer þ

 

Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).  Yes o     No þ

 

The aggregate market value of common stock held by non-affiliates of the registrant as of June 30, 2006 was approximately $13,367,000 based on the closing price of $2.217 per share of the registrant’s common stock as listed on the NASDAQ Global Market.

 

The number of shares of common stock outstanding as of January 31, 2007: 9,618,291

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the definitive proxy statement to be delivered to shareholders in connection with the annual meeting of shareholders to be held on June 6, 2007 are incorporated by reference into Part III of this Form 10-K.

 

 

BSQUARE CORPORATION

 

FORM 10-K

 

TABLE OF CONTENTS

 

Item 1.  Business.

 

FORWARD-LOOKING STATEMENTS

 

This Annual Report on Form 10-K and the documents incorporated herein by reference contain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 based on current expectations, estimates and projections about our industry and our management’s beliefs and assumptions. When used in this Form 10-K and elsewhere, the words “believes,” “plans,” “estimates,” “intends,” “anticipates,” “seeks” and “expects” and similar expressions are intended to identify forward-looking statements. These forward-looking statements include, but are not limited to, statements about our plans, objectives, expectations and intentions and other statements that are not historical facts. These forward-looking statements are not guarantees of future performance and are subject to certain risks and uncertainties that are difficult to predict. Accordingly, actual results may differ materially from those anticipated or expressed in such statements as a result of a variety of factors, including those set forth under Item 1A, “Risk Factors.” Such forward-looking statements include, but are not limited to, statements with respect to the following:

 

 

Readers are cautioned not to place undue reliance on the forward-looking statements, which speak only as of the date made. Except as required by law, we undertake no obligation to update any forward-looking statement, whether as a result of new information, future events or otherwise. Readers, however, should carefully review the factors set forth in this and other reports or documents that we file from time to time with the Securities and Exchange Commission (SEC).

BUSINESS

 

Overview

 

As used in this Annual Report on Form 10-K, “we,” “us” and “our” refer to BSQUARE Corporation. We provide software and engineering service offerings to the smart device marketplace. A smart device is a dedicated purpose computing device that typically has the ability to display information, runs an operating system (e.g., Microsoft^® Windows^® CE 6.0) and may be connected to a network via a wired or wireless connection. Examples of smart devices that we target include set-top boxes, home gateways, point-of-sale terminals, kiosks, voting machines, gaming platforms, personal digital assistants (PDAs), personal media players and smartphones. We primarily focus on smart devices that utilize embedded versions of the Microsoft Windows family of operating systems, specifically Windows CE, Windows XP Embedded and Windows Mobile^tm.

 

We have been providing software and engineering services to the smart device marketplace since our inception. Our customers include world class original equipment manufacturers (OEMs), original design manufacturers (ODMs), silicon vendors, peripheral vendors, and enterprises that develop, market and distribute smart devices. The software and engineering services we provide our customers are utilized and deployed throughout various phases of our customers’ device life cycle, including design, development, customization, quality assurance and deployment.

 

Until mid-2004, we were also in the business of manufacturing and distributing our own proprietary hardware device, called the Power Handheld, which was sold to telecommunication carriers. During the second quarter of 2004, we decided to discontinue this hardware business and end the manufacturing of the device. The hardware business segment is reported as a discontinued operation in our financial results.

 

We were incorporated in the State of Washington in July 1994. Our principal office is located at 110 110^th Avenue NE, Suite 200, Bellevue, Washington 98004, and our telephone number is (425) 519-5900.

 

Industry Background

 

The increasing need for connectivity among both business and consumer users is driving demand for easy-to-use, cost-effective and customizable methods of electronic communication. Although the personal computer (PC) has been the traditional means of electronically connecting suppliers, partners and customers, the benefits of “smart devices” have led to their rapid adoption as a new class of powerful technology.

 

Smart devices are particularly attractive to businesses and consumers because they are often less expensive than desktop and laptop computers; have adaptable configurations, including size, weight and shape; and are able to support a variety of customized applications and user interfaces that can be designed for specific tasks. These devices also are typically compatible with existing business information systems.

 

The smart device industry is characterized by a wide variety of hardware configurations and end-user applications, often designed to address a specific vertical market. To accommodate these diverse characteristics in a cost-effective manner, OEMs and ODMs require operating systems that can be integrated with a diverse set of smart devices and can support an expanding range of industry-specific functionality, content and applications. The Microsoft Windows family of embedded operating systems — specifically Windows CE, Windows Mobile and Windows XP Embedded — helps satisfy these requirements because it leverages the existing industry-wide base of Microsoft Windows developers and technology standards, can be customized to operate across a variety of smart devices and integrate with existing information systems, offers Internet connectivity, and reduces systems requirements compared to traditional PC operating systems.

 

The smart device marketplace is being influenced by the following factors:

 

 

 

Software and Service Solutions for Smart Device Makers

 

Our customers include world class OEMs and ODMs, device component suppliers such as silicon vendors and peripheral vendors and enterprises with customized device needs such as retailers and field service organizations. Representative customer relationships in 2006 included:

 

 

We offer a range of software products to our customers for the development and deployment of smart devices, including both those of third parties and our own proprietary software products, along with our engineering service offerings. Our goal is to increase the breadth and depth of our software and engineering service offerings to smart device customers to enhance our position as an overall solutions provider.

 

Third-Party Software Products

 

We have multiple license and distribution agreements with third-party software vendors. Our ability to resell these third-party software products, whether stand-alone or in conjunction with our own proprietary software and engineering service offerings, provides our customers with a significant source for their smart device project needs. Our third-party software offerings include the following:

 

 

 

Proprietary Software Products

 

Our proprietary software offerings include:

 

 

In response to customer demand and the changing technology landscape affecting secure digital (SD) technology, we released SDIO Now! 2.2 in the first quarter of 2006. Differentiated from other competitive offerings, this product included features requested by licensees such as support for larger SD memory cards, increased performance and a cost-effective solution for adding any combination of two MultiMediaCards (MMC), SD cards or SDIO cards to converged devices.

 

In the second quarter of 2006, we extended our SDIO product line with the introduction of our SDIO Hx architecture, which significantly increases the data throughput performance for handheld devices. OEMs can now economically add high performance Wi-Fi capabilities to smartphones and other embedded devices by using an internal SDIO Wi-Fi card while adding a second external expansion slot for high-density memory cards or other SDIO peripherals. The demand for this cost-effective high performance Wi-Fi/memory solution has made it a highly desirable feature on the next generation of handheld devices.

 

Microsoft has incorporated our SDIO Now! v2.0 technology into its CE 5.0 and Windows Mobile 5.0 operating systems. While the SDIO Hx versions of software have functionality and performance enhancements not found in the SDIO Now! v2.0, there can be no assurance that the inclusion of the SDIO Now! v2.0 software in the base Microsoft operating system will not have a detrimental effect on sales of the SDIO Hx software in the future.

 

 

Software revenue for the last three fiscal years was as follows (in thousands):

 

 

The resale of Microsoft Embedded operating systems and related products accounts for substantially all of our third-party software revenue.

 

Engineering Service Offerings

 

We provide Windows Embedded and Windows Mobile smart device makers with consulting and professional engineering services including:

 

 

Customers utilize our engineering service offerings because our deep experience with Windows Embedded operating systems typically results in shorter development cycles and reduced time to market, lower overall costs to complete projects, and product robustness and features the customer may have been unable to achieve through other means.

 

Revenue from professional engineering services for the last three fiscal years was as follows (in thousands):

 

 

Strategy

 

Our strategy is to continue to enhance our position as a leading provider of smart device software. To advance this strategy, we intend to focus on the following areas:

 

 

 

A key element of our strategy is the expansion of our proprietary products that we license to our smart device customers. We believe that the continuing complexity and demands of device development will require our customers to seek out partners that are able to provide more complete device software solutions that can be quickly customized and brought to market.

 

Relationship with Microsoft and Impact on our Smart Device Solutions Business

 

We have a long-standing relationship with Microsoft and this relationship is critical to the continuing success of our business. Our credentials as a Microsoft partner include:

 

 

We work closely with Microsoft executives, developers, and product managers. We leverage these relationships in a variety of ways, including:

 

 

 

See Item 1A, “Risk Factors,” for more information regarding our relationship with Microsoft.

 

Customers

 

Customers of our smart device software and engineering service offerings include leading OEMs, ODMs, enterprises, silicon vendors and peripheral vendors seeking to leverage the benefits of Windows Embedded operating systems to develop high-quality, full-featured smart devices that meet the requirements of numerous end-markets. Representative customers include Digipos Systems Inc., Electronics for Imaging, Inc., Lockheed Martin, Micros Systems, Inc., Microsoft Corporation, PalmOne, Inc. and Solectron.

 

Sales and Marketing

 

We market our smart device software and engineering services to OEMs, ODMs, enterprises, silicon vendors and peripheral vendors predominantly through our direct sales force located in the United States, Taipei, Taiwan and Tokyo, Japan. We do not make significant use of resellers, channel partners, representative agents or other indirect channels.

 

Key elements of our sales and marketing strategy include direct marketing, advertising, event marketing, public relations, customer and strategic alliance partner co-marketing programs and a comprehensive website. We rely significantly on lead referral and other marketing support programs from strategic partners, particularly Microsoft.

 

Research and Development

 

Our research and development organization is responsible for the design, development and release of our reference design and software products. Members of our research and development staff work closely with our sales and marketing departments, as well as with our customers and potential customers, to better understand market needs and requirements. We perform our research and development primarily utilizing our engineering staff located in Bellevue, Washington and Akron, Ohio.

 

Competition

 

The market for Windows-based embedded software and services is extremely competitive. We face competition from the following:

 

 

As we develop new products, particularly products focused on specific industries, we may begin competing with companies with which we have not previously competed. It is also possible that new competitors will enter the market or that our competitors will form alliances, including alliances with Microsoft, that may enable them to rapidly increase their market share. Microsoft has not agreed to any exclusive arrangement with us, nor has it agreed not to compete with us. Microsoft may decide to bring more of the core embedded development services and expertise that we provide in-house, possibly resulting in reduced product and service revenue opportunities for us. The barrier to entering the market as a provider of Windows-based smart device software and services is low. In addition, Microsoft has created marketing programs to encourage systems integrators to work on Windows Embedded operating system products and services. These systems integrators are given substantially the same access by Microsoft to the Windows technology as we are. New competitors may have lower overhead than we do and may be able to undercut our pricing. We expect that competition will increase as other established and emerging companies enter the Windows-based smart device market, and as new products and technologies are introduced.

 

International Operations

 

During 2006, our international operations consisted principally of subsidiaries and operations in Taipei, Taiwan and Vancouver, British Columbia, Canada. Because our OEM Distribution Agreement with Microsoft restricts our resale of Microsoft Embedded operating systems to North America, including Mexico, our foreign operations have traditionally focused on the sale of our own proprietary software products, particularly SDIO Now!, and engineering services. In the fourth quarter of 2005, we re-established a direct sales presence in Tokyo, Japan. We intend to continue to rebuild our ability to sell our products and services in Japan during 2007 and also plan on broadening our sales presence throughout the Asia-Pacific marketplace. We formalized and expanded our partnership with an engineering services firm in Hydrabad, India during 2006 although there are no commitments in terms of the utilization of those resources.

 

See Item 1A, “Risk Factors,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” for more information regarding our international operations.

 

Personnel

 

As of December 31, 2006, we had 170 employees, including 109 employees in professional engineering services, 12 employees in research and product development, and 49 employees in sales, marketing and administrative services. Of these employees, 138 are located in the United States, 11 are located in Canada and 21 are located in Taiwan. In addition, from time to time, we employ temporary employees, consultants and contractors. As of December 31, 2006, we employed 41 contractors compared to 31 at December 31, 2005.

 

The following highlights the number of employees by area:

 

 

As conditions necessitate, periodically professional engineering service employees will perform research and development engineering and visa versa.

 

Intellectual Property and Other Proprietary Rights

 

Our intellectual property is critical to our success. In general, we attempt to protect our intellectual property rights through patent, copyright, trademark and trade secret laws and contractual arrangements. There can, however, be no assurance that our efforts will be effective to prevent the misappropriation of our intellectual property, or to

prevent the development and design by others of products or technologies similar to, or competitive with those developed by us.

 

Additionally, because a significant portion of our revenue relates to the resale of third-party software products, we are also reliant on our partners, particularly Microsoft, to appropriately protect their own intellectual property.

 

We currently have a number of pending U.S. and international patent applications. We have 19 issued patents worldwide and a number of registered trademarks. We will continue to pursue appropriate protections for our intellectual property.

 

See Item 1A, “Risk Factors,” for more information regarding our intellectual property and other proprietary rights.

 

Available Information

 

We are a reporting company and file annual, quarterly and current reports and other information with the SEC. You may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 450 Fifth Street, NW, Washington, DC 20549. You also may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information we file electronically with the SEC at http://www.sec.gov.

 

Our Internet website can be found at www.bsquare.com. We make available free of charge through our investor relations section, under “SEC Filings,” all our filings, including our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K and amendments to those reports filed pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as soon as reasonably practicable after such material is filed with, or furnished to, the SEC.

 

Directors and Executive Officers

 

The following table sets forth certain information with respect to our directors and executive officers as of January 31, 2007.

 

 

Donald B. Bibeault has been our Chairman of the Board since July 2003. His term of office as a director expires at the 2008 Annual Meeting of Shareholders. Mr. Bibeault is currently President of Bibeault & Associates, Inc. a turnaround-consulting firm, a position he has held since 1975. During that period, Mr. Bibeault has served as chairman, chief executive officer, or chief operating officer of numerous corporations, including Pacific States Steel, PLM International, Best Pipe and Steel, Inc., Ironstone Group, Inc., American National Petroleum, Inc., Tyler-Dawson Supply and Iron Oak Supply Corporation. He has also served as special turnaround advisor to the CEOs of Silicon Graphics Inc., Varity Corporation, Bank of America amongst others. In 2005, Dr. Bibeault was given the first ever Lifetime Achievement Award by the Association of Certified Turnaround Professionals (ACTP). He has been a member of the Board of Overseers of Columbia Business School, a trustee of Golden Gate University, a member of the University of Rhode Island Business Advisory Board, and the Board of Visitors of Golden Gate

University Law School. Mr. Bibeault received a B.S. in electrical engineering from the University of Rhode Island, a M.B.A. from Columbia University and a Ph.D from Golden Gate University. He is also a recipient of a Doctor of Laws degree (honoris causa) from Golden Gate University Law School.

 

Brian T. Crowley has been our President and Chief Executive Officer since July 2003. His term of office as a director expires at the 2008 Annual Meeting of Shareholders. From April 2002 to July 2003, Mr. Crowley served as our Vice President, Product Development. From December 1999 to November 2001, Mr. Crowley held various positions at DataChannel, a market leader in enterprise portals, including Vice President of Engineering and Vice President of Marketing. From April 1999 to December 1999, Mr. Crowley was Vice President, Operations of Consortio, a software company. From December 1997 to April 1999, Mr. Crowley was Director of Development at Sequel Technology, a network solutions provider. From 1986 to December 1997, Mr. Crowley held various positions at Applied Microsystems Corporation, including Vice President and General Manager of the Motorola products and quality assurance divisions. Mr. Crowley also serves as a director of the WSA (formerly Washington Software Association). Mr. Crowley holds a B.S. in Electrical Engineering from Arizona State University.

 

Elwood D. Howse, Jr. has been a director of BSQUARE since November 2002. His current term of office as a director expires at the 2009 Annual Meeting of Shareholders. Mr. Howse was formerly President of Cable & Howse Ventures, a Northwest venture capital management firm formed in 1977. Mr. Howse also participated in the founding of Cable, Howse and Ragen, investment banking and stock brokerage firm, today owned by Wells Fargo and known as Ragen MacKenzie. Mr. Howse has served as corporate director and advisor to various public, private and non-profit enterprises. He served on the board of the National Venture Capital Association and is past President of the Stanford Business School Alumni Association. He currently serves on the boards of directors of Formotus, Inc., OrthoLogic Corporation, Perlego Systems Inc., PowerTech Group, Inc. and not-for profits Junior Achievement Worldwide and Junior Achievement of Washington. He has served on a number of other corporate boards in the past. Mr. Howse received both a B.S. in engineering and a M.B.A. from Stanford University and served in the U.S. Navy submarine force.

 

Elliott H. Jurgensen, Jr. has been a director of BSQUARE since January 2003. His term of office as a director expires at this year’s Annual Meeting of Shareholders. Mr. Jurgensen retired from KPMG LLP in 2003 after 32 years, including 23 years as an audit partner. During his career he held a number of leadership roles, including Managing Partner of the Bellevue, Washington office of KPMG from 1982 to 1991, and Managing Partner of the Seattle, Washington office of KPMG from 1993 to 2002. He is also a director of McCormick & Schmick’s Seafood Restaurants, Inc., Isilon Systems, Inc. and ASC Management, Inc. Mr. Jurgensen has a B.S. in accounting from San Jose State University.

 

Scot E. Land has been a director of BSQUARE since February 1998. His term of office as a director expires at this year’s Annual Meeting of Shareholders. Mr. Land is currently Executive Director, Program on Technology Commercialization, University of Washington. Prior to joining the faculty of the UW, Mr. Land was a managing director of Cascadia Capital LLC. Mr. Land was a founder and managing director of Encompass Ventures from September 1997 to July 2005, Mr. Land was a Senior Technology Analyst and Strategic Planning Consultant with Microsoft from June 1995 to September 1997, and a technology research analyst and investment banker for First Marathon Securities, a Canadian investment bank, from September 1993 to April 1995. From October 1988 to February 1993, Mr. Land was the President and Chief Executive Officer of InVision Technologies, (a wholly owned subsidiary of GE) founded by Mr. Land in October 1988, that designs and manufacturers high-speed computer-aided topography systems for automatic explosives detection for aviation security. Prior to founding InVision Technologies, Mr. Land served as a principal in the international consulting practice of Ernst & Young LLP, a public accounting firm, from April 1984 to October 1988. Mr. Land serves as a director of several privately held companies.

 

William D. Savoy has been a director of BSQUARE since May 2004. His current term of office as a director expires at the 2009 Annual Meeting of Shareholders. Mr. Savoy currently consults with The Muckleshoot Indian Tribe on investment-related matters, strategic planning and economic development. Mr. Savoy served as a consultant for Vulcan Inc., an investment entity that manages the personal financial activities of Paul Allen, from September 2003 to December 2005. Vulcan Inc. resulted from the consolidation in 2000 of Vulcan Ventures Inc., a venture capital fund, and Vulcan Northwest. Mr. Savoy served in various capacities at Vulcan Inc. and its

predecessors from 1988 to September 2003, most recently as the president of the portfolio and asset management division, managing Vulcan’s commercial real estate, hedge fund, treasury and other financial activities, and as the president of both Vulcan Northwest and Vulcan Ventures. Mr. Savoy served as the president and chief executive officer of Layered, Inc., a software company, from June 1989 until its sale in June 1990 and as its chief financial officer from August 1988 to June 1989. He is also a director of Drugstore.com, where he is a member of the audit committee and chairman of the compensation committee. Mr. Savoy received a B.S. in computer science, accounting and finance from Atlantic Union College.

 

Kendra VanderMeulen has been a director at BSQUARE since March 2005. Her term of office as a director expires at this year’s Annual Meeting of Shareholders. Ms. VanderMeulen recently served as executive vice president, Mobile at InfoSpace, and is an active board member or advisor to a variety of companies in the wireless Internet arena, including Perlego Systems, Inc., and Inrix, Inc. Ms. VanderMeulen joined AT&T Wireless (formerly McCaw Cellular Communications, now Cingular) in 1994 to lead the formation of the wireless data division. Prior to McCaw, Ms. VanderMeulen served as COO and president of the Communications Systems Group of Cincinnati Bell Information Systems (now Convergys). She also held a variety of business and technical management positions at AT&T in the fields of software development, voice processing, and signaling systems. Ms. VanderMeulen received a BS degree in mathematics from Marietta College and a MS degree in computer science from Ohio State University. She is the recipient of the 1999 Catherine B. Cleary award as the outstanding woman leader of AT&T.

 

Carey E. Butler has been our Vice President, Professional Engineering Services since November 2003 and directs development teams located in Washington State and Taiwan. From 2002 to 2003, Ms. Butler served as Western Region Area Manager at Information Builders, a business intelligence software and services company. From 2000 to 2001, Ms. Butler was Vice President at Aris Corporation, a professional services company, and from 1996 to 2000 was Partner at BDO Seidman, LLP, a public accounting and management consulting firm. From 1990 to 1996, Ms. Butler was Principal of Performance Computing, Inc., a technology consulting company, subsequently sold to BDO Seidman. From 1982 to 1990, Ms. Butler was Vice President of Operations, Sales and Marketing of Mytec, Inc., a value-added reseller of turnkey financial systems. Ms. Butler holds a B.A. in Business, Quantitative Methods (Computer Science) from University of Washington.

 

Scott C. Mahan has been our Vice President, Finance, Chief Financial Officer, Secretary and Treasurer since January 2004. From October 2003 to December 2003, Mr. Mahan served as a consultant to BSQUARE. From February 2003 to July 2003, Mr. Mahan served as the Interim CFO and Head of Business & Corporate Development at Cranium, Inc., a games manufacturer. From March 2002 to November 2002, Mr. Mahan served as Chief Operating Officer at Xylo, Inc., a company that provides human resource technology and services to Fortune 1000 companies, and from June 1998 to December 2001 as CFO and Vice President, Administration at Qpass, Inc, a provider of billing serves to wireless carriers. From September 1996 to May 1998, Mr. Mahan served as Director of Finance at Sequel Technology Corporation, a company that delivered licensed software for the network traffic monitoring market. From August 1994 to August 1996, Mr. Mahan was Controller of Spry, Inc., an Internet software company and Internet service provider. Prior to that, Mr. Mahan was the Assistant Corporate Controller at Paccar Inc. from August 1993 to July 1994 and was an Audit Manager at Ernst & Young LLP in Seattle where he was employed from July 1987 to August 1993. Mr. Mahan holds a B.S. in Management from Tulane University.

 

Larry C. Stapleton has been our Vice President of North America Sales since March 2005. Mr. Stapleton is responsible for sales of professional engineering services, products and distribution. Prior to joining BSQUARE, Mr. Stapleton served as Vice President of Global Business Development at Terabeam from November 1999 to April 2004, where he was responsible for developing telecom carrier business for broadband wireless access equipment in Asia and managing employees and VAR partnerships in Singapore, Malaysia, Japan, China, Philippines, and South Korea. Prior to that, Mr. Stapleton served as Terabeam’s Vice President, Product Development, responsible for developing all of Terabeam’s optical telecommunications equipment. From November 1997 to November 1999, Mr. Stapleton was Vice President of Sales and Marketing for SelfCHARGE, a contract product design and manufacturing (ODM) startup developing products for the medical, consumer and industrial markets. Before that he was Senior Director of Client Services at Teague from April 1992 to November 1997, generating designs for AT&T, Microsoft, John Deere, and many other Fortune 500 companies. He also has held a variety of product development, marketing, and engineering positions with several Fortune 100 companies. His degrees include an M.B.A. from University of Washington and a B.S., Mechanical Engineering, from San Jose State University.

 

The following risk factors and other information included in this Annual Report on Form 10-K should be carefully considered. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us, or that we currently deem immaterial, may also impair our business operations. If any of the following risks occur, our business, financial condition, operating results and cash flows could be materially adversely affected.

 

Microsoft-Related Risk Factors

 

Due to the market that we serve and, in particular, our focus on devices utilizing Microsoft’s Embedded operating systems as well as the fact that a significant portion of our revenue is derived from the resale of Microsoft Embedded operating systems, Microsoft has a significant direct and indirect influence on our business. The following represent several Microsoft-related risk factors which may negatively impact our business and operating results.

 

If we do not maintain our OEM Distribution Agreement with Microsoft, our revenue would decrease and our business would be adversely affected.

 

We have an OEM Distribution Agreement (ODA) with Microsoft, which enables us to resell Microsoft Windows Embedded operating systems to our customers in the United States, Canada, the Caribbean (excluding Cuba) and Mexico. Software sales under this agreement constitute a significant portion of our revenue. If the ODA was terminated, our software revenue and resulting gross profit would decrease significantly and our operating results would be negative impacted. Moreover, if the ODA with Microsoft is renewed on less favorable terms, our revenue could decrease, our gross profit from these transactions, which is low relative to our gross profit from sales of our proprietary software products, could further decline and/or our operating expenses could increase. Microsoft offers us, and our competitors, largely volume-based rebates under the ODA and its related programs which have the effect of increasing our software gross profit. If Microsoft were to reduce, or eliminate, these rebate programs, which can contribute 2-3% of our total gross profit percentage from sales of Microsoft Embedded operating systems on a quarterly basis, our gross profit and operating results would be negatively impacted. Microsoft informed us in the fourth quarter of 2006 that they are restructuring the rebate program beginning in the first quarter of 2007. We expect this restructuring to have a negative impact on our gross profit but are not yet able to quantify the impact. The ODA is renewable annually, and there is no automatic renewal provision in the agreement. The ODA was last renewed in October 2006 and will expire on June 30, 2007, unless terminated earlier under the provisions of the ODA.

 

Microsoft has audited our records under our OEM Distribution Agreement in the past and will do so again in the future, and any negative audit results could result in additional charges and/or the termination of the ODA.

 

There are provisions in the ODA that require us to maintain certain internal records and processes for royalty auditing and other reasons. Non-compliance with these and other requirements could result in the termination of the ODA. We underwent an audit under the ODA with Microsoft covering a period of five years which concluded in the second quarter of 2004. Microsoft determined that we had correctly reported royalties during the audit period but that we could not account for all license inventory that we had received from Microsoft’s authorized replicators. While we disagreed with many of the audit findings, we ultimately chose to settle the dispute. Total settlement costs of $310,000 were recognized in the second quarter of 2004, which included audit costs of $140,000. In addition, we were notified during the fourth quarter of 2006 that Microsoft will be conducting another audit, which is currently scheduled to begin in March 2007. It is possible that future audits could result in additional charges.

 

If we do not maintain our favorable relationship with Microsoft, we will have difficulty marketing and selling our software and services and may not receive developer releases of Windows Embedded operating systems and Windows Mobile targeted platforms. As a result, our revenue and operating results could suffer.

 

We maintain a strategic marketing relationship with Microsoft. In the event that our relationship with Microsoft were to deteriorate, our efforts to market and sell our software and services to OEMs and others could be adversely affected and our business could be harmed. Microsoft has significant influence over the development plans and buying decisions of OEMs and others utilizing Windows Embedded operating systems and Windows Mobile targeted platforms for smart devices and these targeted platforms are a significant focus for us. Microsoft provides customers referrals to us. Moreover, Microsoft controls the marketing campaigns related to its operating systems. Microsoft’s marketing activities, including trade shows, direct mail campaigns and print advertising, are important to the continued promotion and market acceptance of Windows Embedded operating systems and Windows Mobile targeted platforms and, consequently, to our sale of Windows-based embedded software and services. We must maintain a favorable relationship with Microsoft to continue to participate in joint marketing activities with them, which includes participating in “partner pavilions” at trade shows, listing our services on Microsoft’s website, and receiving customer referrals. In the event that we are unable to continue our joint marketing efforts with Microsoft, or fail to receive referrals from them, we would be required to devote significant additional resources and incur additional expenses to market software products and services directly to potential customers. In addition, we depend on Microsoft for developer releases of new versions of, and upgrades to, Windows Embedded and Windows Mobile software in order to facilitate timely development and delivery of our own software and services. If we are unable to maintain our favorable relationship with Microsoft, our revenue could decline and/or our costs could increase thereby negatively impacting our operating results.

 

Unexpected delays or announcement of delays by Microsoft of Windows Embedded operating systems and Windows Mobile targeted platforms product releases could adversely affect our revenue and operating results.

 

Unexpected delays or announcement of delays in Microsoft’s delivery schedule for new versions of its Windows Embedded operating systems and Windows Mobile targeted platforms could cause us to delay our product introductions or impede our ability to sell our products and services and/or to complete customer projects on a timely basis. These delays, or announcements of delays by Microsoft, could also cause our customers to delay or cancel their project development activities or product introductions, which could have a negative impact on our revenue and operating results.

 

If Microsoft adds features to its Windows operating system or develops products that directly compete with products and services we provide, our revenue and operating results could be negatively impacted.

 

As the developer of Windows, Windows XP Embedded, Windows CE and Windows Mobile, Microsoft could add features to its operating systems or could develop products that directly compete with the products and services we provide to our customers. The ability of our customers, or potential customers, to obtain products and services directly from Microsoft that compete with our products and services could negatively affect our revenue and operating results. Even if the standard features of future Microsoft operating system software were more limited than our offerings, a significant number of our customers, and potential customers, might elect to accept more limited functionality in lieu of purchasing additional software from us or delay the purchase of our products and services while they perform a comparison of Microsoft’s competing offerings. Moreover, the resulting competitive pressures could lead to price reductions for our products and reduce our revenue and gross profit margin accordingly and our operating results could be adversely impacted.

 

Microsoft has released Windows CE version 6.0 and version 5.0 of its Windows Mobile Smartphone and PocketPC operating systems which contain basic SDIO functionality and is therefore competitive with our SDIO Hx Now! and SDIO Hx product offerings. An agreement with Microsoft required us to deliver to Microsoft our SDIO Now! v.1.0 source code for inclusion into Windows CE 5.0 and Windows Mobile 5.0. Since that source code was delivered to Microsoft, we have continued to develop our SDIO Now! product line, introducing SDIO Now! v.2.0, v.2.2 and most recently SDIO Now! Hx, with new features and performance improvements that we believe are

important to customers. Additionally, we plan further enhancements to our SDIO Now! software product in 2007 and beyond. However, there can be no assurance that our next-generation SDIO Now! product offerings will continue to be competitive in the marketplace or that customers will not decide to use the basic functionality they receive from Microsoft as part of the operating system. Sales of SDIO Now! have traditionally represented the majority of our high-margin proprietary software revenue.

 

If the market for Windows Embedded operating systems and Windows Mobile targeted platforms fails to develop further, develops more slowly than expected, or declines, our business and operating results may be materially harmed.

 

Because a significant portion of our revenue to date has been generated by software products and engineering services targeted at the Windows Embedded operating systems and Windows Mobile platforms, if the market for these systems or platforms fails to develop further or develops more slowly than expected, or declines, our business and operating results could be negatively impacted. Market acceptance of Windows Embedded and Windows Mobile will depend on many factors, including:

 

 

General Business-Related Risk Factors

 

Our marketplace is extremely competitive, which may result in price reductions, lower gross profit margins and loss of market share.

 

The market for Windows-based embedded software and services is extremely competitive. Increased competition may result in price reductions, lower gross profit margin and loss of customers and market share, which would harm our business. We face competition from:

 

 

 

As we develop new products, particularly products focused on specific industries, we may begin competing with companies with which we have not previously competed. It is also possible that new competitors will enter the market or that our competitors will form alliances, including alliances with Microsoft, that may enable them to rapidly increase their market share. Microsoft has not agreed to any exclusive arrangement with us, nor has it agreed not to compete with us. Microsoft may decide to bring more of the core embedded development services and expertise that we provide in-house, possibly resulting in reduced product and service revenue opportunities for us. The barrier to entering the market as a provider of Windows-based smart device software and services is low. In addition, Microsoft has created marketing programs to encourage systems integrators to work on Windows Embedded operating system products and services. These systems integrators are given substantially the same access by Microsoft to the Windows technology as we are. New competitors may have lower overhead than we do and may be able to undercut our pricing. We expect that competition will increase as other established and emerging companies enter the Windows-based smart device market, and as new products and technologies are introduced.

 

Our ability to maintain or grow the portion of our software revenue attributable to our own proprietary software products is contingent on our ability to bring to market competitive, unique offerings that keep pace with technological changes and needs. If we are not successful in doing so, our business would be harmed.

 

Proprietary software product sales provide us with much higher gross profit margins than we typically receive from third-party software products and our engineering service offerings as well as other advantages. Increasing the number and amount of proprietary products we sell is an important part of our growth strategy. Our ability to maintain and increase the revenue contribution from proprietary software products is contingent on our ability to enhance the features and functionality of our current proprietary products as well as to devise, develop and introduce new products. There can be no assurance that we will be able to maintain and expand the number of proprietary products that we sell, and our failure to do so could negatively impact revenue and our operating results.

 

We may experience delays in our efforts to develop new products and services, and these delays could cause us to miss market opportunities which could negatively impact our revenue and operating results.

 

The market for Windows-based embedded software and services is very competitive. As a result, the life cycles of our products and services are difficult to estimate. To be successful, we believe we must continue to enhance our current offerings and provide new software product and service offerings with attractive features, prices and terms that appeal to our customers. We have experienced delays in enhancements and new product release dates in the past and may be unable to introduce enhancements or new products successfully or in a timely manner in the future. Our revenue and operating results may be negatively impacted if we delay releases of our products and product enhancements, or if we fail to accurately anticipate our customers’ needs or technical trends and are unable to introduce new products and service offerings into the market successfully. In addition, our customers may defer or forego purchases of our products if we, Microsoft, our competitors or major hardware, systems or software vendors introduce or announce new products.

 

If the market for smart devices develops more slowly than we expect, or declines, our revenue may not develop as anticipated, if at all, and our business would be harmed.

 

The market for smart devices is still emerging and the potential size of this market and the timing of its development are not known. As a result, our profit potential is uncertain and our revenue may not develop as anticipated, if at all. We are dependent upon the broad acceptance by businesses and consumers of a wide variety of smart devices, which will depend on many factors, including:

 

 

The success and profitability of our engineering service offerings are contingent on our ability to differentiate our offerings adequately in the marketplace, which is, in turn, contingent on our ability to retain our engineering personnel and defend our billing rate structure against those of our competitors, including those using lower-cost offshore resources. If we are unable to do so successfully, our business could be harmed.

 

We are a leader in providing engineering services to smart device customers. Our market differentiation is created through several factors, including our experience with a variety of smart device platforms and applications. Our differentiation is contingent, in part, on our ability to attract and retain employees with this expertise, significantly all of whom are currently based in the United States. To the extent we are unable to retain critical engineering services talent and/or our competition is able to deliver the same services by using lower-cost offshore resources, our service revenue and operating results could be negatively impacted.

 

The success and profitability of our service engagements are contingent upon our ability to scope and bid engagements and deliver our services profitably. If we are unable to do so, our service revenue service gross profit margin and operating results could be negatively impacted.

 

Various factors may cause the total cost of service projects to exceed the original estimate provided to the customer or the contractual maximum in the case of fixed price contracts, including specification changes, customer deliverable delays, inadequate scoping and inefficient service delivery. If we are unable to adequately scope, bid and deliver on service engagements successfully, our service revenue, service gross profit and operating results could be negatively impacted. In addition, depending on the cause of an overrun for a given customer, we may also decide to provide pricing concessions to that customer which could negatively impact our service revenue, service gross profit and operating results.

 

We have entered into engineering service agreements in which we have agreed to perform our engineering service work at relatively low rates per hour in exchange for royalties, sometimes guaranteed, in the future. There is no guarantee that these arrangements will culminate as anticipated.

 

We have entered into service contracts that involve reducing up-front engineering service fees in return for a per-device royalty as our customers ship their devices, and we may enter into more such agreements in the future. Many of these contracts call for guaranteed royalty payments by our customers. Because we are delaying revenue past the point where our services are performed, there is a risk that our customers may cancel their device projects or that their devices may not be successful in the market. In addition, these customers may not pay us all royalties owed, which could negatively impact our revenue and operating results.

 

Cooperation and support from silicon vendors is critical for the success of our hardware reference designs. Such cooperation cannot be assured.

 

We have been developing hardware reference designs based on the Marvell PXA Xscale architecture and plan to develop reference designs based on other silicon architectures. It is important that the silicon on which we base our reference designs receive continued support in the marketplace by the silicon vendors. For example, during the development of our designs, Intel made a strategic decision to sell its PXA Xscale division to Marvell which negatively impacted the sale of our Xscale-based reference designs. There can be no assurance that Marvell will continue to pursue and support the markets that we have been targeting with our reference designs. Cooperation and support from silicon vendors is critical to the success of our reference designs, and should silicon vendors not support our efforts, our revenue and operating results could be negatively impacted.

 

The long sales cycle of our products and services makes our revenue susceptible to fluctuations.

 

Our sales cycle is typically three to nine months because the expense and complexity of the software and engineering service offerings we sell generally require a lengthy customer approval process and may be subject to a number of significant risks over which we have little or no control, including:

 

 

In addition, to successfully sell software and engineering service offerings, we must frequently educate our potential customers about the full benefits of these software and services, which can require significant time. If our sales cycle further lengthens unexpectedly, it could adversely affect the timing of our revenue which could cause our quarterly results to fluctuate.

 

Erosion of the financial condition of our customers could adversely affect our business.

 

Our business could be adversely affected should the financial condition of our customers erode, given that such erosion could reduce demand from those customers for our software and engineering services, could cause them to terminate their relationships with us, and/or could increase the credit risk of those customers. If the global information technology market weakens, the likelihood of the erosion of the financial condition of our customers increases, which could adversely affect the demand for our software and services. Additionally, while we believe that our allowance for doubtful accounts is adequate, those allowances may not cover actual losses, which could adversely affect our business and operating results.

 

We may be subject to product liability claims that could result in significant costs.

 

Our license, warranty and service agreements with our customers typically contain provisions designed to limit our exposure to potential product liability claims. It is possible, however, that these provisions may be ineffective under the laws of certain jurisdictions. Although we have not experienced any product liability claims to date, the sale and support of our products and services may be subject to such claims in the future. In addition, to the extent we develop and sell increasingly comprehensive, customized turnkey solutions for our customers, we may be increasingly subject to risks of product liability claims. There is a risk that any such claims or liabilities may exceed, or fall outside, the scope of our insurance coverage, and we may be unable to retain adequate liability insurance in the future. A product liability claim brought against us, whether successful or not, could harm our business and operating results.

 

Past acquisitions have proven difficult to integrate, and future acquisitions, if any, could disrupt our business, dilute shareholder value and adversely affect our operating results.

 

We have acquired the technologies, assets and/or operations of other companies in the past and may acquire or make investments in companies, products, services and technologies in the future as part of our growth strategy. As an example, on June 30, 2005, we acquired certain assets of Vibren Technologies, Inc. for $500,000 in cash and the

assumption of certain liabilities and obligations. If we fail to properly evaluate, integrate and execute on our acquisitions and investments, our business and prospects may be seriously harmed. In some cases, we have implemented reductions in workforce and office closures in connection with an acquisition, which has resulted in significant costs to us. To successfully complete an acquisition, we must properly evaluate the technology, accurately forecast the financial impact of the transaction, including accounting charges and transaction expenses, integrate and retain personnel, combine potentially different corporate cultures and effectively integrate products and research and development, sales, marketing and support operations. If we fail to do any of these, we may suffer losses and impair relationships with our employees, customers and strategic partners. Additionally, management may be distracted from day-to-day operations. We also may be unable to maintain uniform standards, controls, procedures and policies, which are especially critical in light of the Sarbanes-Oxley and other corporate governance requirements, and significant demands may be placed on our management and our operations, information services and financial, legal and marketing resources. Finally, acquired businesses sometimes result in unexpected liabilities and contingencies, which could be significant.

 

Intellectual Property-Related Risk Factors

 

Our software and service offerings could infringe the intellectual property rights of third parties, which could expose us to additional costs and litigation and could adversely affect our ability to sell our products and services or cause shipment delays or stoppages.

 

It is difficult to determine whether our products and engineering services infringe third-party intellectual property rights, particularly in a rapidly evolving technological environment in which technologies often overlap and where there may be numerous patent applications pending, many of which are confidential when filed. If we were to discover that one of our products or service offerings, or a product based on one of our reference designs, violated a third-party’s proprietary rights, we may not be able to obtain a license on commercially reasonable terms, or at all, to continue offering that product or service. Similarly, third parties may claim that our current or future products and services infringe their proprietary rights, regardless of whether such claims have merit. Any such claims could increase our costs and negatively impact our business and operating results. In certain cases, we have been unable to obtain indemnification against claims that third-party technology incorporated into our products and services infringe the proprietary rights of others. However, any indemnification we do obtain may be limited in scope or amount. Even if we receive broad third-party indemnification, these entities may not have the financial capability to indemnify us in the event of infringement. In addition, in some circumstances we are required to indemnify our customers for claims made against them that are based on our products or services. There can be no assurance that infringement or invalidity claims related to the products and services we provide, or arising from the incorporation by us of third-party technology, and claims for indemnification from our customers resulting from such claims, will not be asserted or prosecuted against us. Some of our competitors have, or are affiliated, with companies with substantially greater resources than we have, and these competitors may be able to sustain the costs of complex intellectual property litigation to a greater degree and for longer periods of time than we could. In addition, we expect that software developers will be increasingly subject to infringement claims as the number of products and competitors in the software industry grows, and as the functionality of products in different industry segments increasingly overlap. Such claims, even if not meritorious, could result in the expenditure of significant financial and managerial resources in addition to potential product redevelopment costs and delays. Furthermore, if we were unsuccessful in resolving a patent or other intellectual property infringement action claim against us, we may be prohibited from developing or commercializing certain of our technologies and products, or delivering services based on the infringing technology, unless we obtain a license from the holder of the patent or other intellectual property rights. There can be no assurance that we would be able to obtain any such license on commercially favorable terms, or at all. If such license is not obtained, we would be required to cease these related business operations, which could have a material adverse effect on our business, revenue and operating results.

 

If we fail to adequately protect our intellectual property rights, competitors may be able to use our technology or trademarks, which could weaken our competitive position, reduce our revenue and increase our costs.

 

If we fail to adequately protect our intellectual property, our competitive position could be weakened and our revenue adversely affected. We rely primarily on a combination of patent, copyright, trade secret and trademark laws, as well as confidentiality procedures and contractual provisions, to protect our intellectual property. These laws and procedures provide only limited protection. We have applied for a number of patents relating to our engineering work although we do not rely on patents as our primary defensive measure in protecting our intellectual property. These patents, both issued and pending, may not provide sufficiently broad protection, or they may not prove to be enforceable, against alleged infringers. There can be no assurance that any of our pending patents will be granted. Even if granted, these patents may be circumvented or challenged and, if challenged, may be invalidated. Any patents obtained may provide limited or no competitive advantage to us. It is also possible that another party could obtain patents that block our use of some, or all, of our products and services. If that occurred, we would need to obtain a license from the patent holder or design around those patents. The patent holder may or may not choose to make a license available to us at all or on acceptable terms. Similarly, it may not be possible to design around a blocking patent. In general, there can be no assurance that our efforts to protect our intellectual property rights through patent, copyright, trade secret and trademark laws will be effective to prevent misappropriation of our technology, or to prevent the development and design by others of products or technologies similar to or competitive with those developed by us.

 

We frequently license the source code of our products and the source code results of our services to customers. There can be no assurance that customers with access to our source code will comply with the license terms or that we will discover any violations of the license terms or, in the event of discovery of violations, that we will be able to successfully enforce the license terms and/or recover the economic value lost from such violations. To license some of our software products, we rely in part on “shrinkwrap” and “clickwrap” licenses that are not signed by the end user and, therefore, may be unenforceable under the laws of certain jurisdictions. As with other software, our products are susceptible to unauthorized copying and uses that may go undetected, and policing such unauthorized use is difficult. A significant portion of our marks include the word “BSQUARE” or the preface “b.” Other companies use forms of “BSQUARE” or the preface “b” in their marks alone, or in combination with other words, and we cannot prevent all such third-party uses. We license certain trademark rights to third parties. Such licensees may not abide by our compliance and quality control guidelines with respect to such trademark rights and may take actions that would harm our business.

 

The computer software market is characterized by frequent and substantial intellectual property litigation, which is often complex and expensive, and involves a significant diversion of resources and uncertainty of outcome. Litigation may be necessary in the future to enforce our intellectual property or to defend against a claim of infringement or invalidity. Litigation could result in substantial costs and the diversion of resources and could negatively impact our business and operating results.

 

Our software or hardware products or the third-party hardware or software integrated with our products may suffer from defects or errors that could impair our ability to sell our products and services.

 

Software and hardware components as complex as those needed for smart devices frequently contain errors or defects, especially when first introduced or when new versions are released. We have had to delay commercial release of certain versions of our products until problems were corrected and, in some cases, have provided product enhancements to correct errors in released products. Some of our contracts require us to repair or replace products that fail to work. To the extent that we repair or replace products our expenses may increase. In addition, it is possible that by the time defects are fixed, the market opportunity may decline which may result in lost revenue. Moreover, to the extent that we provide increasingly comprehensive products and services, particularly those focused on hardware, and rely on third-party manufacturers and suppliers to manufacture these products, we will be dependent on the ability of third-party manufacturers to correct, identify and prevent manufacturing errors. Errors that are discovered after commercial release could result in loss of revenue or delay in market acceptance, diversion of development resources, damage to our reputation and increased service and warranty costs, all of which could negatively affect our business and operating results.

 

If we are unable to license key software from third parties, our business could be harmed.

 

We sometimes integrate third-party software with our proprietary software and engineering service offerings or sell such third-party software offerings on a standalone basis (e.g. embedded operating systems under our ODA with Microsoft). If our relationships with these third-party software vendors were to deteriorate, or be eliminated in their entirety, we might be unable to obtain licenses on commercially reasonable terms, if at all. In the event that we are unable to obtain these third-party software offerings, we would be required to develop this technology internally, assuming it was economically or technically feasible, or seek similar software offerings from other third parties assuming there were competing offerings in the marketplace, which could delay or limit our ability to introduce enhancements or new products, or to continue to sell existing products and engineering services, thereby negatively impacting our revenue and operating results.

 

Governace and Contract-Related Risk Factors

 

It might be difficult for a third-party to acquire us even if doing so would be beneficial to our shareholders.

 

Certain provisions of our articles of incorporation, bylaws and Washington law may discourage, delay or prevent a change in the control of us or a change in our management, even if doing so would be beneficial to our shareholders. Our Board of Directors has the authority under our amended and restated articles of incorporation to issue preferred stock with rights superior to the rights of the holders of common stock. As a result, preferred stock could be issued quickly and easily with terms calculated to delay or prevent a change in control of our company or make removal of our management more difficult. In addition, our Board of Directors is divided into three classes. The directors in each class serve for three-year terms, one class being elected each year by our shareholders. This system of electing and removing directors may discourage a third-party from making a tender offer or otherwise attempting to obtain control of our company because it generally makes it more difficult for shareholders to replace a majority of our directors. In addition, Chapter 19 of the Washington Business Corporation Act generally prohibits a “target corporation” from engaging in certain significant business transactions with a defined “acquiring person” for a period of five years after the acquisition, unless the transaction or acquisition of shares is approved by a majority of the members of the target corporation’s Board of Directors prior to the time of acquisition. This provision may have the effect of delaying, deterring or preventing a change in control of our company. The existence of these anti-takeover provisions could limit the price that investors might be willing to pay in the future for shares of our common stock.

 

We will incur substantial costs to comply with the requirements of the Sarbanes-Oxley Act of 2002.

 

The Sarbanes-Oxley Act of 2002 (the Act) introduced new requirements regarding corporate governance and financial reporting. Among the many requirements is the requirement under Section 404 of the Act for management to annually assess and report on the effectiveness of our internal control over financial reporting and for our registered public accountant to attest to this report. The SEC has modified the effective date and adoption requirements of Section 404 implementation for non-accelerated filers, such as us, such that we are first required to issue our management report on internal control over financial reporting in our annual report on Form 10-K for the fiscal year ending December 31, 2007. We will be required to dedicate significant time and resources during fiscal 2007 to ensure compliance. The costs to comply with these requirements will likely be significant and adversely affect our operating results. In addition, there can be no assurance that we will be successful in our efforts to comply with Section 404. Failure to do so could result in penalties and additional expenditures to meet the requirements, which could affect the ability of our auditors to issue an unqualified report (currently required by December 31, 2008) which, in turn, may further adversely affect our business and operating results.

 

Non-compliance with our lease agreement could have a material adverse impact on our financial position.

 

If we default under our corporate headquarters lease, the landlord has the ability to demand cash payments forgiven in 2004 under the former headquarters lease. The amount of the forgiven payments for which the landlord has the ability to demand repayment, in the event of default, decreases on a straight-line basis over the length of our

ten-year headquarters lease. The total amount of cash payments forgiven for which the landlord has the ability to demand repayment was $1.8 million at December 31, 2006. Any breach of or non-compliance with these lease agreements could have a material adverse impact on our business.

 

Decreased effectiveness of equity compensation could adversely affect our ability to attract and retain employees, and required changes in accounting for equity compensation could adversely affect earnings.

 

We have historically used stock options and other forms of equity-related compensation as key components of our overall employee compensation program in order to align employees’ interests with the interests of our shareholders, encourage employee retention, and provide competitive compensation packages. Applicable stock exchange listing standards relating to obtaining shareholder approval of equity compensation plans could make it more difficult or expensive for us to grant options or new forms of equity instruments to employees in the future. As a result, we may incur increased compensation costs, change our equity compensation strategy or find it difficult to attract, retain and motivate employees, any of which could materially adversely affect our business.

 

International Operations-Related Risk Factors

 

Our international operations expose us to greater intellectual property, management, collections, regulatory and other risks.

 

Customers outside of North America generated approximately 5% of our total revenue for the year ended December 31, 2006. We currently have international operations in Taipei, Taiwan; Vancouver, British Columbia, Canada; and Tokyo, Japan. Our international activities and operations expose us to a number of risks, including the following:

 

 

These risks could have a material adverse effect on the financial and managerial resources required to operate our foreign offices, as well as on our future international revenue, which could harm our business and operating results.

 

As we increase the amount of software development conducted in non-U.S. locations, potential delays and quality issues may impact our ability to timely deliver our software and services, potentially impacting our revenue and profitability.

 

We conduct development activities in non-U.S. locations, primarily India, through a partnership with a local company, and Taiwan, to take advantage of the high-quality, low-cost software development resources found in these countries. Additionally, we have plans to increase development activity in both our Taiwan operation and other non-U.S. locations as engineering demands necessitate the hiring of additional engineering personnel. To date, we have limited experience in managing large scale software development done in non-U.S. locations. Moving portions of our software development to these locations inherently increases the complexity of managing these programs and may result in delays in introducing new products to market, or delays in completing service projects for our customers, which in turn may adversely impact the revenue we recognize from related products and services and could also adversely impact the profitability of service engagements employing offshore resources.

 

As our customers seek more cost-effective locations to develop and manufacture their smart devices, particularly overseas locations, our ability to continue to sell these customers our products and services could be limited, which could negatively impact our revenue and operating results.

 

Due to competitive and other pressures, some of our customers have and others may seek to move the development and manufacturing of their smart devices to overseas locations which may limit our ability to sell these customers our products and services. As an example, under our OEM Distribution Agreement with Microsoft, we are only able to resell Microsoft Embedded operating systems largely in North America. If our customers, or potential customers, move their manufacturing overseas we may be restricted from reselling these customers Microsoft Embedded operating systems, or our other products and services, which could negatively impact our revenue and operating results.

 

Our corporate headquarters are located in 43,400 square feet of leased space in a single location in Bellevue, Washington. The underlying lease expires in 2014.

 

In North America, we also lease office space in San Diego, California; Longmont, Colorado; Akron, Ohio; and Vancouver, British Columbia, Canada. We also lease office space internationally in Taipei, Taiwan. Our facilities have sufficient capacity to support our current operational needs as well as short-term growth plans.

 

IPO Litigation

 

In Summer and early Fall 2001, four purported shareholder class action lawsuits were filed in the United States District Court for the Southern District of New York against us, certain of our current and former officers and directors (the “Individual Defendants”), and the underwriters of our initial public offering (the “Underwriter Defendants”). The suits purport to be class actions filed on behalf of purchasers of our common stock during the period from October 19, 1999 to December 6, 2000. The complaints against us have been consolidated into a single action and a Consolidated Amended Complaint, which was filed on April 19, 2002 and is now the operative complaint.

 

The plaintiffs allege that the Underwriter Defendants agreed to allocate stock in our initial public offering to certain investors in exchange for excessive and undisclosed commissions and agreements by those investors to make additional purchases of stock in the aftermarket at pre-determined prices. The plaintiffs allege that the prospectus for our initial public offering was false and misleading in violation of the securities laws because it did not disclose these arrangements. The action seeks damages in an unspecified amount.

 

The action is being coordinated with approximately 300 other nearly identical actions filed against other companies. On July 15, 2002, we moved to dismiss all claims against us and the Individual Defendants. On October 9, 2002, the district court dismissed the Individual Defendants from the case without prejudice based upon stipulations of dismissal filed by the plaintiffs and the Individual Defendants. On February 19, 2003, the district court denied the motion to dismiss the complaint against us. On October 13, 2004, the district court certified a class in six of the approximately 300 other nearly identical actions (the “focus cases”) and noted that the decision is intended to provide strong guidance to all parties regarding class certification in the remaining cases. The Underwriter Defendants appealed this decision and the Second Circuit vacated the district court’s decision granting class certification in the six focus cases on December 5, 2006. The plaintiffs have not yet moved to certify a class in our case.

 

We have approved a settlement agreement and related agreements which set forth the terms of a settlement between us, the Individual Defendants, the plaintiff class and the vast majority of the other approximately 300 issuer defendants. It is unclear what impact the Second Circuit’s decision vacating class certification in the focus cases will have on the settlement, which has not yet been finally approved by the district court. On December 14, 2006, Judge Scheindlin held a hearing. The plaintiffs informed the district court that they planned to file a petition for rehearing and rehearing en banc. The district court stayed all proceedings, including a decision on final approval of the

settlement and any amendments of the complaints, pending the Second Circuit’s decision on the plaintiffs’ petition for rehearing. The plaintiffs filed the petition for rehearing and rehearing en banc on January 5, 2007.

 

Pursuant to the settlement and related agreements, if the settlement receives final approval by the district court, the settlement provides for a release of us and the Individual Defendants for the conduct alleged in the action to be wrongful. We would agree to undertake certain responsibilities, including agreeing to assign away, not assert, or release certain potential claims we may have against the Underwriter Defendants. The settlement agreement also provides a guaranteed recovery of $1 billion to plaintiffs for the cases relating to all of the approximately 300 issuers. To the extent that the Underwriter Defendants settle all of the cases for at least $1 billion, no payment will be required under the issuers’ settlement agreement. To the extent that the Underwriter Defendants settle for less than $1 billion, the issuers are required to make up the difference. On April 20, 2006, JPMorgan Chase and the plaintiffs reached a preliminary agreement to settle for $425 million. The JPMorgan Chase preliminary agreement has not yet been approved by the district court. In an amendment to the issuers’ settlement agreement, the issuers’ insurers agreed that the JPMorgan Chase preliminary agreement, if approved, will only offset the insurers’ obligation to cover the remainder of the plaintiffs’ guaranteed $1 billion recovery by 50% of the value of the JPMorgan Chase settlement, or $212.5 million. Therefore, if the JPMorgan Chase preliminary agreement to settle is finalized and then approved by the district court, then the maximum amount that the issuers’ insurers will be potentially liable for is $787.5 million. It is unclear what impact the Second Circuit’s decision vacating class certification in the focus cases will have on the JPMorgan Chase preliminary agreement.

 

We anticipate that any potential financial obligation of us to plaintiffs pursuant to the terms of the issuers’ settlement agreement and related agreements will be covered by existing insurance. We currently are not aware of any material limitations on the expected recovery of any potential financial obligation to plaintiffs from our insurance carriers. Our carriers are solvent, and we are not aware of any uncertainties as to the legal sufficiency of an insurance claim with respect to any recovery by plaintiffs. Therefore, we do not expect that the settlement will involve any payment by us. If material limitations on the expected recovery of any potential financial obligation to the plaintiffs from our insurance carriers should arise, our maximum financial obligation to plaintiffs pursuant to the settlement agreement would be less than $3.4 million. However, if the JPMorgan Chase preliminary agreement is preliminarily and then finally approved, our maximum financial obligation to the plaintiffs pursuant to the settlement agreement would be approximately $2.7 million.

 

There is no assurance that the district court will grant final approval to the issuers’ settlement. If the settlement agreement is not approved and we are found liable, we are unable to estimate or predict the potential damages that might be awarded, whether such damages would be greater than our insurance coverage, and whether such damages would have a material impact on our results of operations or financial condition in any future period.

 

Customer Litigation

 

As previously reported, we had been in dispute with a former customer (“Former Customer”) regarding payment of amounts due for a contract under which we provided professional engineering services. We had an account receivable outstanding with the Former Customer of $475,000 as of September 30, 2006 and increased the allowance for doubtful accounts by $475,000 in the fourth quarter of 2005 related to this account receivable. As a result of the dispute, we filed a Complaint for breach of contract and misappropriation of intellectual property against the Former Customer on December 22, 2005 in federal district court in the state of Delaware. On January 27, 2006, the Former Customer filed an Answer and Counterclaim against us, and we filed our Reply to the Former Customer’s Answer and Counterclaim on February 16, 2006, denying all counterclaims against us.

 

On October 31, 2006, we and the Former Customer settled this dispute by entering into a settlement agreement (the “Settlement Agreement”). Under the Settlement Agreement, the Former Customer has agreed to pay a Settlement Amount of $200,000 to us on or before December 31, 2009 and also provide certain intellectual property to us, under a license agreement. The Former Customer made an initial payment of $10,000 upon execution of the Settlement Agreement. The remaining amount owed to us under the Settlement Agreement will be satisfied through the purchase of Microsoft embedded operating systems from us or through commissions and royalties earned by us related to the sale of the Former Customer’s intellectual property. The Former Customer’s parent company has placed its common stock in escrow to guarantee performance under the Settlement Agreement, including an

agreement that the Settlement Amount is satisfied by December 31, 2009. Additionally, the Settlement Agreement provides that all claims between the parties are terminated. The settlement structure provides for the possibility of ongoing commission and royalty revenue to us after the satisfaction of the $200,000 settlement amount such that the total recovery may be greater than $200,000.

 

No matters were submitted to a vote of shareholders during the fourth quarter ended December 31, 2006.

 

Market Information

 

Our common stock is traded on the NASDAQ Global Market (formerly known as the NASDAQ National Market) under the symbol “BSQR.” The following table sets forth the high and low sale prices for our common stock for the periods indicated, as reported by the NASDAQ Global Market. These prices reflect the 1-for-4 reverse stock split that occurred effective October 7, 2005. For 20 trading days subsequent to and including the effective date of the reverse split, our common stock traded under the symbol “BSQRD.”

 

 

Holders

 

As of January 31, 2007 there were approximately 206 holders of record of our common stock. Because many shares of our common stock are held by brokers and other institutions on behalf of shareholders, we are unable to determine the total number of shareholders represented by these holders of record.

 

Dividends

 

We have never paid cash dividends on our common stock. We currently intend to retain any future earnings to fund future development and growth and, therefore, do not anticipate paying any cash dividends in the foreseeable future.

 

The following selected consolidated financial data should be read in conjunction with the consolidated financial statements and the notes thereto in Item 8 of Part II, “Financial Statements and Supplementary Data,” and the information contained in Item 7 of Part II, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Historical results are not necessarily indicative of future results.

 

 

 

(1) Stock-based compensation expense:

 

The following Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with our consolidated financial statements and related notes. Some statements and information contained in this Management’s Discussion and Analysis of Financial Condition and Results of Operations are not historical facts but are forward-looking statements. For a discussion of these forward-looking statements, and of important factors that could cause results to differ materially from the forward-looking statements contained in this report, see Item 1 of Part I, “Business — Forward-Looking Statements” and Item 1A of Part I, “Risk Factors.”

 

Overview

 

We provide software and engineering services to the smart device marketplace. A smart device is a dedicated purpose computing device that typically has the ability to display information, runs an operating system (e.g., Microsoft^® Windows^® CE 6.0) and may be connected to a network via a wired or wireless connection. Examples of smart devices that we target include set-top boxes, home gateways, point-of-sale terminals, kiosks, voting machines, gaming platforms, PDAs, personal media players and smartphones. We primarily focus on smart devices that utilize embedded versions of the Microsoft Windows family of operating systems, specifically Windows CE, Windows XP Embedded and Windows Mobile^tm.

 

We have been providing software and engineering services to the smart device marketplace since our inception. Our customers include world class OEMs, ODMs, silicon vendors, peripheral vendors, and enterprises with customized device needs such as retailers and wireless operators that market and distribute connected smart devices. The software and engineering services we provide our customers are utilized and deployed throughout various phases of our customers’ device life cycle, including design, development, customization, quality assurance and deployment.

 

Until 2004, we were also in the business of manufacturing and distributing our own proprietary hardware device, called the Power Handheld, which was sold to telecommunication carriers. During the second quarter of 2004, we decided to discontinue this hardware business and end the manufacturing of the device. The hardware business segment is reported as a discontinued operation in our financial results.

 

Critical Accounting Judgments

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires estimates and assumptions that affect the reported amounts of assets and liabilities, revenue and expenses and related disclosures of contingent assets and liabilities in the consolidated financial statements and accompanying notes. The SEC has defined a company’s critical accounting policies as those that are most important to the portrayal of our financial condition and results of operations, and those that require us to make our most difficult and subjective judgments, often as a result of the need to make estimates related to matters that are inherently uncertain. Based on this definition, we have identified the critical accounting policies and judgments addressed below. We also have other key accounting policies, which involve the use of estimates, judgments and assumptions that are relevant to understanding our results. For additional information see Item 8 of Part II, “Financial Statements and Supplementary Data — Note 1 — Description of Business and Accounting Policies.”

Although we believe that our estimates, assumptions and judgments are reasonable, they are necessarily based upon presently available information. Actual results may differ significantly from these estimates under different assumptions, judgments or conditions.

 

Revenue Recognition

 

We recognize revenue from software and engineering service sales when the following four revenue recognition criteria are met: persuasive evidence of an arrangement exists; delivery has occurred or services have been rendered; the selling price is fixed or determinable; and collectibility is reasonably assured. Contracts and customer purchase orders are generally used to determine the existence of an arrangement. Shipping documents and customer acceptance, when applicable, are used to verify delivery. We assess whether the selling price is fixed or determinable based on the contract and payment terms associated with the transaction and whether the sales price is subject to refund or adjustment. We assess collectibility based primarily on the creditworthiness of the customer as determined by credit checks and analysis, as well as the customer’s payment history.

 

We recognize revenue upon shipment provided that no significant obligations remain on our part and substantive acceptance conditions, if any, have been met. We also enter into arrangements in which a customer purchases a combination of software licenses, engineering services and post-contract customer support or maintenance (PCS). As a result, significant contract interpretation is sometimes required to determine the appropriate accounting, including how the price should be allocated among the deliverable elements if there are multiple elements, whether undelivered elements are essential to the functionality of delivered elements, and when to recognize revenue. PCS includes rights to upgrades, when and if available, telephone support, updates, and enhancements. When vendor specific objective evidence (VSOE) of fair value exists for all elements in a multiple element arrangement, revenue is allocated to each element based on the relative fair value of each of the elements. VSOE of fair value is established by the price charged when the same element is sold separately. Accordingly, the judgments involved in assessing VSOE have an impact on the recognition of revenue in each period. Changes in the allocation of the sales price between deliverables might impact the timing of revenue recognition but would not change the total revenue recognized on the contract.

 

When elements such as software and engineering services are contained in a single arrangement, or in related arrangements with the same customer, we allocate revenue to each element based on its relative fair value, provided that such element meets the criteria for treatment as a separate unit of accounting. In the absence of fair value for a delivered element, we allocate revenue first to the fair value of the undelivered elements and allocate the residual revenue to the delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until the undelivered elements are fulfilled. As a result, contract interpretations and assessments of fair value are sometimes required to determine the appropriate accounting.

 

Service revenue from fixed-priced contracts is recognized using the percentage of completion method. Percentage of completion is measured based primarily on input measures such as hours incurred to date compared to total estimated hours to complete, with consideration given to output measures, such as contract milestones, when applicable. We rely on estimates of total expected hours as a measure of performance and cost in order to determine the amount of revenue to be recognized. Revisions to hour and cost estimates are recorded in the period the facts that give rise to the revision become known. Service revenue from time and materials contracts and training services is recognized as services are performed.

 

When elements such as engineering services and royalties are contained in a single arrangement, we recognize revenue from engineering services as earned in accordance with the four revenue recognition criteria stated above. We recognize royalty revenue when we receive the royalty report from the customer, which is usually thirty to forty-five days after month end.

 

Deferred revenue includes deposits received from customers for service contracts and unamortized service contract revenue, customer advances under OEM licensing agreements and maintenance revenue. In instances where final acceptance of the software or services is specified by the customer, revenue is deferred until all acceptance criteria have been met.

 

Allowance for Doubtful Accounts

 

Our accounts receivable balances are net of an estimated allowance for doubtful accounts. We perform ongoing credit evaluations of our customers’ financial condition and generally do not require collateral. We estimate the collectability of our accounts receivable and record an allowance for doubtful accounts. We consider many factors when making this estimate, including analyzing accounts receivable and historical bad debts, customer concentrations, customer creditworthiness, current economic trends and changes in customer payment history, when evaluating the adequacy of the allowance for doubtful accounts. Because the allowance for doubtful accounts is an estimate, it may be necessary to adjust it if actual bad debt expense exceeds the estimated reserve.

 

Stock-Based Compensation

 

Effective January 1, 2006, we began recording compensation expense associated with stock options and other forms of equity compensation in accordance with Statement of Financial Accounting Standards No. 123R, Share-Based Payment (“SFAS 123R”), as interpreted by SEC Staff Accounting Bulletin No. 107. Prior to December 31, 2005, we accounted for stock options according to the provisions of Accounting Principles Board (“APB”) Opinion No. 25, Accounting for Stock Issued to Employees, and related interpretations, as permitted by SFAS 123, Accounting for Stock-Based Compensation, and, therefore, no related compensation expense was recorded for awards granted with no intrinsic value. We adopted the modified prospective transition method provided for under SFAS 123R and consequently have not retroactively adjusted results for prior periods. Under this transition method, compensation cost associated with stock options includes: 1) compensation cost related to the remaining unvested portion of all stock option awards granted prior to December 31, 2005, based on the grant date fair value estimated in accordance with the original provisions of SFAS 123; and 2) compensation cost related to all stock option awards granted subsequent to December 31, 2005, based on the grant-date fair value estimated in accordance with the provisions of SFAS 123R. We record expense over the vesting period using the straight-line method. Compensation expense for awards under SFAS 123R includes an estimate for forfeitures.

 

At December 31, 2006, total compensation cost related to stock options granted to employees under the Company’s stock option plans but not yet recognized was $470,000, net of estimated forfeitures. This cost will be amortized on the straight-line method over a weighted-average period of approximately 1.4 years and will be adjusted for subsequent changes in estimated forfeitures.

 

Taxes

 

As part of the process of preparing our consolidated financial statements, we are required to estimate income taxes in each of the countries in which we operate. This process involves estimating our current tax exposure together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities. We must then assess the likelihood that our deferred tax assets will be recovered from future taxable income, and, to the extent we believe that recovery is not likely, we must establish a valuation allowance. To the extent we establish a valuation allowance, or increase this allowance in a period, it may result in an expense within the tax provision in the statements of operations. Significant management judgment is required in determining our provision for income taxes, deferred tax assets and liabilities and any valuation allowance recorded against our net deferred tax assets. We have provided a full valuation allowance on deferred tax assets because of our uncertainty regarding their realizability based on our valuation estimates. If we determine that it is more likely than not that the deferred tax assets would be realized, the valuation allowance would be reversed. In order to realize our deferred tax assets, we must be able to generate sufficient taxable income. Additionally, because we do business in foreign tax jurisdictions, our sales may be subject to other taxes, particularly withholding taxes. The tax regulations governing withholding taxes are complex, causing us to have to make assumptions about the appropriate tax treatment and estimates of resulting withholding taxes.

 

In the second quarter of 2005, we became aware that certain amounts remitted, or that were planned to be remitted, from our Taiwan subsidiary or Taiwanese customers might be subject to withholding tax at 20% of the amount remitted. In the fourth quarter of 2005, we began applying for withholding tax exemptions from the Taiwan government on all significant contracts on which withholding tax might be owed. When granted, these exemptions

eliminate any withholding tax and Taiwan-based income tax, as applicable, for the contract to which the exemption relates. To date, we have received approval for all withholding exemption applications that we have filed for which significant withholding tax might be owed. However, there is no assurance that future exemptions will be granted, and if we do not receive all, or some, of the exemptions for which we apply, we could be obligated to pay withholding tax in the future. We are continuing to evaluate alternative business and tax planning strategies to minimize corporate income and withholding tax obligations in connection with our Taiwan subsidiary.

 

Results of Operations

 

The following table presents certain financial data as a percentage of total revenue for the periods indicated. Our historical operating results are not necessarily indicative of the results for any future period.

 

 

Comparison of the Years Ended December 31, 2006, 2005 and 2004

 

Revenue

 

Total revenue consists of sales of software and engineering services to smart device makers. Software revenue consists of sales of third-party software and sales of our own proprietary software products which include royalties from our software products, software development kits and smart device reference designs as well as royalties from our software products. Engineering service revenue is derived from hardware and software development, maintenance and support contracts, fees for customer training, and rebillable expenses.

 

Total revenue was $49.8 million in 2006 and $42.9 million in 2005, representing an increase of $6.9 million or 16%. This increase was due to higher sales of software and engineering services discussed further below.

 

Total revenue was $42.9 million in 2005 and $38.9 million in 2004, representing an increase of $4 million or 10%. This increase was due to higher sales of software and professional engineering services discussed further below. A significant portion of our total revenue in 2004 was attributable to Cardinal Healthcare Systems (Cardinal), which accounted for 19% of our total revenue. In 2005, Cardinal represented $831,000, or 2%, of total revenue. In the second quarter of 2005, Cardinal began purchasing from a competitor and discontinued purchasing from us.

 

Revenue from customers located outside of North America includes revenue attributable to our foreign operations, as well as software and services delivered to foreign customers from our operations located in North America. We currently have international operations in Taipei, Taiwan; Vancouver, British Columbia, Canada; and Tokyo, Japan. In the fourth quarter of 2003, we closed our Japan operations, but re-established a direct sales presence in Tokyo, Japan, in the fourth quarter of 2005. Revenue from customers located outside of North America was $2.7 million in 2006 and $2.3 million in 2005, representing an increase of $.4 million or 17%. This increase was primarily due to increased service revenue at our Taiwan subsidiary. Billable hours in Taiwan for 2006 increased 144% from 2005 offset by a 56% decline in our realized rate per hour in Taiwan attributable to some service contracts on which we have agreed to perform services at relatively low rates in exchange for per device royalties, some of which are guaranteed. Revenue from customers located outside of the United States was $3.8 million in 2005 and $4.8 million in 2004, representing a decrease of $1.0 million or 20%. This decrease was primarily due to a continued decrease in engineering projects in Asia.

 

Software revenue

 

Software revenue for 2006, 2005 and 2004 is presented below (dollars in thousands):

 

 

The vast majority of our third-party software revenue is comprised of the resale of Microsoft Embedded operating systems. The majority of our proprietary software revenue is attributable to sales of our SDIO Now! software product.

 

Software revenue was $32.9 million in 2006 and $31.2 million in 2005, representing an increase of $1.7 million or 6%. This increase was primarily due to higher third-party software revenue of $1.8 million, partially offset by a decrease of $32,000 in proprietary software revenue. The increase in third-party software sales was primarily attributable to an increase in sales to new accounts obtained through a customer referral arrangement entered into in the fourth quarter of 2005. We expect third-party software sales in 2007 to increase approximately 5-10% from 2006 based on current industry projections, a new customer referral arrangement entered into in the fourth quarter of 2006 and growth in the market for Microsoft embedded server products which we resell.

 

Software revenue was $31.2 million in 2005 and $28.4 million in 2004, representing an increase of $2.8 million or 10%. Excluding sales to Cardinal of $831,000 in 2005 and $7.4 million in 2004, software sales to customers other than Cardinal increased $9.4 million or 45% from 2004. This increase was due to third-party software sales growth within our top-10 accounts, increases in new account revenue, higher per account revenue for non-top-10 accounts and an increase in customer referral revenue beginning in the fourth quarter of 2005. Effective October 1, 2005, we entered into a relationship with a third party and obtained its customer list. Under this relationship, we paid a referral fee on the gross margin generated from these customers through September 30, 2006.

 

Proprietary software revenue was $2.6 million in 2006 and 2005 and $2.7 million in 2004. Revenue was flat due to decreased sales of our SDIO Now! product, offset by higher sales of our reference design products including Schema BSP and our IDP Development kits. Sales of our SDIO Now! software product fell primarily due to competing technology being introduced from Microsoft. Sales of our reference design products increased due to the acquisition of certain of these products from Vibren Technologies, Inc. in June 2005 coupled with the launch of our IDP 270 development platform. Proprietary software revenue in 2006 included $169,000 of royalty revenue from several Asia Pacific service contracts, which contain minimum guaranteed royalties. We expect proprietary

software revenue to increase approximately 50-85% in 2007 as compared to 2006 based on renewed strength of SDIO Now! product sales, increased reference design and related product sales due primarily to the introduction of our new IDP 320 development platform and royalty revenue stemming from the Asia Pacific contracts referenced previously assuming these customers fulfill their contractual obligations.

 

Service revenue

 

Service revenue for 2006, 2005 and 2004 is presented below (dollars in thousands):

 

 

Service revenue was $16.9 million in 2006 and $11.7 million in 2005, representing an increase of $5.2 million or 44%. This increase was due to higher activity levels driven by overall market strength, sales improvements and improved personnel utilization. Billable hours increased 58%, while the realized rate per hour decreased 11%. Billable hour growth occurred both in North America and our Taiwan subsidiary. The decrease in our realized rate per hour was driven by our Taiwan subsidiary, where we are engaged in several contracts pursuant to which we have provided or are providing services at relatively low rates in exchange for royalty payments in the future, some of which are guaranteed. Royalties on such contracts are not recognized until reported by the customer.

 

Service revenue was $11.7 million in 2005 and $10.6 million in 2004, representing an increase of $1.1 million or 11%. This increase was due to higher activity levels driven by overall market strength, sales improvements and improved personnel utilization. The realized rate per hour in 2005 was up 14% from 2004, while billable hours remained relatively flat.

 

Gross profit

 

Cost of revenue related to software revenue consists primarily of license fees and royalties for third-party software and the costs of product media, product duplication and manuals. Amortization of intangible assets, acquired from Vibren in June 2005, is included in cost of software revenue and was $190,000 in 2006, $95,000 in 2005 and zero in 2004. Cost of revenue related to service revenue consists primarily of salaries and benefits for our engineers, contractor costs, plus related facilities and depreciation costs. Gross profit on the sales of third-party software products were also positively affected by rebates we received from Microsoft which we earn through the achievement of previously defined objectives. Rebates comprised $599,000 of our gross profit in 2006, $632,000 in 2005 and $360,000 in 2004.

 

The following table outlines software, services and total gross profit (dollars in thousands):

 

 

Software gross profit

 

Software gross profit as a percentage of software revenue was 21% in 2006 and 21% in 2005. Higher margins on third-party software sales were offset by lower margins on proprietary product sales primarily due to intangible asset amortization affecting proprietary software cost-of-sales for a full year in 2006 compared to half a year in 2005. Third-party software revenue typically generates a much lower profit margin than our proprietary software;

our proprietary software revenue has typically generated 90% and greater gross margins. The third-party software gross profit percentage was 14.9% in 2006, 14.0% in 2005 and 14.7% in 2004.

 

Software gross profit as a percentage of software revenue was 21% in 2005 and 23% in 2004. The decrease in software gross profit percentage was primarily due to the increase in lower margin third-party software revenue as a percentage of total software revenue.

 

We expect third-party software sales to continue to be a significant percentage of our software revenue, and, therefore, our software gross margin is likely to remain relatively low in the foreseeable future. We expect our third-party software gross profit margin to decline to approximately 13% in 2007, based on increased competitive pressures and lower projected rebates. We expect our proprietary software gross margin, historically very high, to improve in 2007 based on higher revenue levels and the discontinuance in the third quarter of 2007 of the Vibren intangible asset amortization discussed previously.

 

Service gross profit

 

Service gross profit was 31% in 2006, 29% in 2005 and 24% in 2004. The overall improvements in gross profit were attributable to increased service revenue, improved resource utilization, improved pricing and contract management, partially offset by a decrease in realized rate per hour for reasons discussed previously. Until the end of the second quarter of 2005, we generally employed more service engineering personnel than near-term service engineering demands dictated such that as revenue levels increased in 2004 and the first half of 2005, the service gross profit margin increased accordingly. In addition, our facilities and depreciation costs, a portion of which is included in service cost of revenue, are relatively fixed such that as service revenue levels increased in 2005 and 2006, service gross profit margin improved due to fixed costs being spread over a larger revenue base. Facilities and related allocations represented approximately 7% of total service cost of revenue in 2006 and 10% in 2005 and 2004.

 

Operating expenses

 

Selling, general and administrative

 

Selling, general and administrative expenses consist primarily of salaries and benefits for our sales, marketing and administrative personnel and related facilities and depreciation costs as well as professional services (e.g., legal and audit).

 

Selling, general and administrative expenses were $10.0 million in 2006 and $9.5 million in 2005, representing an increase of $500,000 or 5%. Selling, general and administrative expenses represented 20% of our total revenue in 2006 and 22% in 2005. Total selling, general and administrative expenses increased due to stock-based compensation expense of $445,000 recognized during 2006, higher facilities and related costs, higher personnel costs and higher sales commissions and bonuses, partially offset by lower bad debt expense, lower professional fees and lower marketing costs.

 

Selling, general and administrative expenses were $9.5 million in 2005 and $9.2 million in 2004, representing an increase of $328,000 or 4%. Selling, general and administrative expenses represented 22% of our total revenue in 2005 and 24% in 2004. Total selling, general and administrative expenses increased due to bad debt expense of $399,000 related to a customer contract dispute, higher facilities and related costs, higher personnel costs and higher recruiting costs to support increased hiring, partially offset by lower marketing costs, lower commissions and the audit settlement costs of $310,000 recognized in 2004 related to our OEM Distribution Agreement with Microsoft.

 

Research and development

 

Research and development expenses consist primarily of salaries and benefits for software development and quality assurance personnel, and related facilities and depreciation costs. Research and development expenses in all periods exclude expenses related to the hardware business unit, which are included in discontinued operations.

 

Research and development expenses were $2.8 million in 2006 and $2.0 million in 2005, representing an increase of $800,000 or 40%. Research and development expenses represented 6% of our total revenue in 2006 and 5% in 2005. During 2006, we increased our level of research and development in conjunction with the SDIO Now! version releases mentioned previously as well as the initiation and continuation of our reference design development efforts. The increase was specifically attributable to increased payroll and related expenses resulting from headcount growth as well as increased allocated expenses where service engineering personnel were contributing to the product development effort. We are continuing to execute and evolve our product strategy and expect to continue to invest in new product development initiatives during 2007.

 

Research and development expenses were $2.0 million in 2005 and $855,000 in 2004, representing an increase of $1.1 million or 128%. Research and development expenses represented 5% of our total revenue in 2005 and 2% in 2004. During 2005, we increased our level of research and development significantly in conjunction with the SDIO Now! version releases mentioned previously as well as the initiation of our PMP and other reference design development efforts. The increase was specifically attributable to increased payroll and related expenses resulting from headcount growth as well as increased allocated expenses where service engineering personnel were contributing to the product development effort.

 

Interest and other

 

Interest and other income consists of interest earnings on our cash, cash equivalents and short-term investments, as well as adjustments made to the carrying value of cost-based investments. Interest and other income was $442,000 in 2006 and $287,000 in 2005, representing an increase of $155,000, or 54%, with the increase attributable to higher balances in short-term investments and higher prevailing interest rates in 2006 as compared to 2005. Interest and other income was $287,000 in 2005 and $237,000 in 2004, representing an increase of $50,000, or 21%, with the increase attributable to generally higher prevailing interest rates in 2005 as compared to 2004.

 

Taxes

 

Federal, state and foreign income taxes resulted in a tax provision of $29,000 in 2006, $14,000 in 2005 and $11,000 in 2004, yielding an effective rate of (6.7%) in 2006, (1.1%) in 2005 and (0.2%) in 2004. The tax provision in all three years related to our Taiwan subsidiary.

 

We provided full valuation allowances on deferred tax assets during 2006, 2005 and 2004 because of uncertainty regarding their realizability. The increase in the valuation allowance on our deferred tax assets was $887,000 in 2006, $360,000 in 2005 and $3.2 million in 2004. At December 31, 2006 we had approximately $70.4 million of net operating loss carryforwards and $2.0 million of tax credit carryforwards, which begin to expire in 2021. In addition, we have $8.2 million of capital loss carryforwards, which expire in 2008. Utilization of these net operating losses and tax credits may be subject to an annual limitation due to provisions of the Internal Revenue Code of 1986, as amended. Events which cause limitations in the amount of net operating losses and tax credits that we may utilize in any one year include, but are not limited to, a cumulative ownership change of more than 50% as defined, over a three-year period.

 

In the second quarter of 2005, we became aware that certain amounts remitted, or that were planned to be remitted, from our Taiwan subsidiary or Taiwanese customers might be subject to withholding tax at 20% of the amount remitted. In the fourth quarter of 2005, we began applying for withholding tax exemptions from the Taiwan government on all significant contracts on which withholding tax might be owed. When granted, we expect these exemptions would eliminate any withholding tax and Taiwan-based income tax, as applicable, for the contract to which the exemption relates. To date, we have received approval for all withholding exemption applications that we have filed for which significant withholding tax might be owed. However, there is no assurance that future exemptions will be granted and if we do not receive all, or some, of the exemptions for which we apply, we could be obligated to pay withholding tax in the future. We are continuing to evaluate alternative business and tax planning strategies to minimize corporate income and withholding tax obligations in connection with our Taiwan subsidiary.

 

Loss from discontinued operations

 

During the second quarter of 2004, we decided to discontinue our hardware business and, consequently, the results of those operations have been accounted for and presented as a discontinued operation. A reconciliation of the loss from discontinued operations for 2004 is presented below (in thousands):

 

 

Included in cost of hardware revenue in 2004 is a $1.6 million net charge related to the impairment of inventory. Included in operating expenses of the discontinued operations are $74,000 related to corporate allocations.

 

Restructuring and related charges included in loss from discontinued operations include the following (in thousands):

 

 

During the first quarter of 2004, we eliminated ten positions in the hardware business unit, representing 7% of our then remaining workforce. We incurred severance of $79,000 and $10,000 of related charges.

 

As a result of our decision to discontinue our hardware business, we recorded a $1.5 million charge in the second quarter of 2004, of which $608,000 related to the impairment of tooling, $585,000 related to the impairment of software licenses used in the device, $120,000 related to severance for eight employees terminated, representing 7% of our then remaining workforce, and $162,000 related to other charges.

 

Liquidity and Capital Resources

 

As of December 31, 2006, we had $11.1 million of cash, cash equivalents, short-term investments and restricted cash compared to $10.7 million at December 31, 2005. Specifically, we had $9.9 million of unrestricted cash, cash equivalents, and short-term investments and $1.2 million of restricted cash at December 31, 2006. Our restricted cash balance relates to the securitization of a letter of credit for our current corporate headquarters lease obligation, the majority of which will continue to secure that obligation through its expiration in 2014. During 2006, net cash provided by operating activities was $413,000. This cash provided was primarily attributable to a $129,000 decrease in accounts receivable driven by improved cash collections, offset by our net loss of $466,000 excluding the effect of non-cash expenses totaling $1.2 million. Our working capital at December 31, 2006 was $10.3 million compared to $9.5 million at December 31, 2005.

 

During 2005, net cash used in operating activities was $1.6 million, primarily attributable to our net loss of $1.3 million.

 

During 2004, net cash used in operating activities was $1.9 million, primarily attributable to our net loss of $7.1 million. The use of cash attributable to our net loss was largely offset by a $3.1 million non-cash impairment charge related to the discontinuance of our hardware business unit and a $2.7 million decrease in restricted cash related to planned reductions in letters of credit supporting our former corporate headquarters facility lease.

 

Investing activities used cash of $5.8 million in 2006 and provided cash of $4.3 million in 2005 and $648,000 in 2004. Investing activities in 2006 included $5.4 million used to purchase short-term investments and $357,000 used for capital equipment purchases. Investing activities in 2005 included $5.0 million provided by the maturity of short-term investments, offset by $500,000 of net cash used in the acquisition of certain assets of Vibren Technologies in the second quarter of 2005 and $226,000 used for capital equipment purchases. Investing activities in 2004 included $1.3 million provided by the maturity of short-term investments and $776,000 used for capital expenditures primarily related to the purchase of furniture, equipment and leasehold improvements for our new corporate headquarters in the second and third quarters of 2004.

 

Financing activities provided cash of $121,000 in 2006, $26,000 in 2005 and $461,000 in 2004 as a result of employees’ exercise of stock options.

 

Tabular Disclosure of Contractual Obligations

 

We have significant lease commitments, which expire through 2014. We have operating lease commitments for office space in Bellevue, Washington; San Diego, California; Longmont, Colorado; Vancouver, British Columbia, Canada; and Taipei, Taiwan. The following are our contractual commitments associated with these lease and other obligations (in thousands):

 

 

In addition to these lease obligations, we have the following future or potential cash commitment:

 

 

We believe that our existing cash, cash equivalents and short-term investments will be sufficient to meet our needs for working capital and capital expenditures for at least the next 12 months.

 

Related Party Transactions

 

Pursuant to a consulting agreement between us and Mr. Donald Bibeault, the Chairman of our Board of Directors, Mr. Bibeault provided us with onsite consulting services from July 2003, when he was appointed to our Board of Directors, to September 2006. We incurred expenses of $72,000 in 2006, $113,000 in 2005 and $158,000 in 2004 under this consulting agreement. On June 29, 2006, we and Mr. Bibeault agreed to terminate this consulting

agreement, effective September 30, 2006. Mr. Bibeault continues to serve as the Chairman of our Board of Directors.

 

Impact of New Accounting Pronouncements

 

Effective January 1, 2006, we began recording compensation expense associated with stock options and other forms of equity compensation in accordance with Statement of Financial Accounting Standards No. 123R, Share-Based Payment, (“SFAS 123R”) as interpreted by SEC Staff Accounting Bulletin No. 107. The following table presents stock-based compensation expense (in thousands):

 

 

SFAS No. 154, “Accounting Changes and Error Corrections, a Replacement of APB Opinion No. 20 and FASB Statement No. 3.” SFAS 154 establishes, unless impracticable, retrospective application as the required method for reporting a change in accounting principle in the absence of explicit transition requirements specific to a newly adopted accounting principle. Previously, most changes in accounting principle were recognized by including the cumulative effect of changing to the new accounting principle in net income of the period of the change. SFAS 154 carries forward the guidance in APB Opinion 20 “Accounting Changes,” requiring justification of a change in accounting principle on the basis of preferability. SFAS 154 also carries forward without change the guidance contained in APB Opinion 20, for reporting the correction of an error in previously issued financial statements and for a change in an accounting estimate. The adoption of SFAS 154 on January 1, 2006 did not impact our financial position or results of operations.

 

SFAS No. 155, “Accounting for Certain Hybrid Financial Instruments — an amendment of FASB Statements No. 133 and 140.” SFAS 155 amends SFAS 133, “Accounting for Derivative Instruments and Hedging Activities” and SFAS 140, “Accounting for Transfers and Servicing of Financial Assets and Extinguishments of Liabilities.” SFAS 155 (i) permits fair value remeasurement for any hybrid financial instrument that contains an embedded derivative that otherwise would require bifurcation, (ii) clarifies which interest-only strips and principal-only strips are not subject to the requirements of SFAS 133, (iii) establishes a requirement to evaluate interests in securitized financial assets to identify interests that are freestanding derivatives or that are hybrid financial instruments that contain an embedded derivative requiring bifurcation, (iv) clarifies that concentrations of credit risk in the form of subordination are not embedded derivatives, and (v) amends SFAS 140 to eliminate the prohibition on a qualifying special purpose entity from holding a derivative financial instrument that pertains to a beneficial interest other than another derivative financial instrument. SFAS 155 is effective for us on January 1, 2007 and is not expected to have a material impact our financial position or results of operations.

 

SFAS No. 157, “Fair Value Measurements.” SFAS 157 defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles, and expands disclosures about fair value measurements. SFAS 157 is effective for us on January 1, 2008 and is not expected to have a material impact on our financial position or results of operations.

 

Financial Accounting Standards Board Staff Positions and Interpretations

 

FASB Staff Position (FSP) No. 115-1, “The Meaning of Other-Than-Temporary Impairment and Its Application to Certain Investments.” FSP 115-1 provides guidance for determining when an investment is considered impaired, whether impairment is other-than-temporary, and measurement of an impairment loss. An investment is

considered impaired if the fair value of the investment is less than its cost. If, after consideration of all available evidence to evaluate the realizable value of its investment, impairment is determined to be other-than-temporary, then an impairment loss should be recognized equal to the difference between the investment’s cost and its fair value. FSP 115-1 nullifies certain provisions of Emerging Issues Task Force (EITF) Issue No. 03-1, “The Meaning of Other-Than-Temporary Impairment and Its Application to Certain Investments,” while retaining the disclosure requirements of EITF 03-1 which were adopted in 2003. The adoption of FSP 115-1 on January 1, 2006 did not impact our financial position or results of operations.

 

FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes, an interpretation of FASB Statement 109.” Interpretation 48 prescribes a recognition threshold and a measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. Benefits from tax positions should be recognized in the financial statements only when it is more likely than not that the tax position will be sustained upon examination by the appropriate taxing authority that would have full knowledge of all relevant information. A tax position that meets the more-likely-than-not recognition threshold is measured at the largest amount of benefit that is greater than fifty percent likely of being realized upon ultimate settlement. Tax positions that previously failed to meet the more-likely-than-not recognition threshold should be recognized in the first subsequent financial reporting period in which that threshold is met. Previously recognized tax positions that no longer meet the more-likely-than-not recognition threshold should be derecognized in the first subsequent financial reporting period in which that threshold is no longer met. Interpretation 48 also provides guidance on the accounting for and disclosure of unrecognized tax benefits, interest and penalties. Interpretation 48 is effective for us on January 1, 2007 and is not expected to have a material impact on our financial position or results of operations.

 

SEC Staff Accounting Bulletins

 

Staff Accounting Bulletin (SAB) No. 108, “Considering the Effects of a Prior Year Misstatements When Quantifying Misstatements in Current Year Financial Statements.” SAB 108 addresses how the effects of prior year uncorrected errors must be considered in quantifying misstatements in the current year financial statements. The effects of prior year uncorrected errors include the potential accumulation of improper amounts that may result in a material misstatement on the balance sheet or the reversal of prior period errors in the current period that result in a material misstatement of the current period income statement amounts. Adjustments to current or prior period financial statements would be required in the event that after application of various approaches for assessing materiality of a misstatement in current period financial statements and consideration of all relevant quantitative and qualitative factors, a misstatement is determined to be material. SAB 108 is applicable to all financial statements issued by us after November 15, 2006.

 

Interest Rate Risk.  We primarily hold non-derivative financial instruments in our short-term investment portfolio. Our cash equivalents consist of high-quality securities, as specified in our investment policy guidelines. The policy limits the amount of credit exposure to any one issue to a maximum of 15% and any one issuer to a maximum of 10% of the total portfolio, with the exception of treasury securities, commercial paper and money market funds, which are exempt from size limitation. The policy limits all short-term investments to mature in two years or less, with the average maturity being one year or less. These securities are subject to interest rate risk and will decrease in value if interest rates increase.

 

The following table presents the amounts of our short-term investments that are subject to market risk by range of expected maturity and weighted average interest rates as of December 31, 2006 and 2005. This table does not include cash equivalents or money market funds, as those funds are not subject to market risk.

 

 

Foreign Currency Exchange Rate Risk.  Currently, the majority of our revenue and expenses is denominated in U.S. dollars, and, as a result, we have not experienced significant foreign exchange gains or losses to date. While we have conducted some transactions in foreign currencies and expect to continue to do so, we do not anticipate that foreign exchange gains or losses will be significant. We have not engaged in foreign currency hedging to date, although we may do so in the future.

 

Our international business is subject to risks typical of international activity, including, but not limited to, differing economic conditions, changes in political climate, differing tax structures and regulations and other regulations and restrictions. Accordingly, our future results could be impacted by changes in these or other factors.

 

Our exposure to foreign exchange rate fluctuations can vary as the financial results of our foreign subsidiary are translated into U.S. dollars in consolidation. The effect of foreign exchange rate fluctuations for the year ended December 31, 2006 was not material.

 

BSQUARE CORPORATION

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

 

To the Board of Directors and Stockholders

BSQUARE Corporation

 

We have audited the accompanying consolidated balance sheet of BSQUARE Corporation as of December 31, 2006 and the related consolidated statements of operations, stockholders’ equity and cash flows for the year ended December 31, 2006. Our audits also included the financial statement schedule listed at Item 15(a)(2) for the year ended December 31, 2006. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of BSQUARE Corporation as of December 31, 2006 and the results of its operations and its cash flows for the year ended December 31, 2006, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule for the year ended December 31, 2006, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

As discussed in Note 1 to the consolidated financial statements, effective January 1, 2006, the Company adopted the provisions of Statement of Financial Accounting Standards No. 123 (revised 2004), Share-Based Payment.

 

Moss Adams LLP

 

Seattle, Washington

February 15, 2007

 

The Board of Directors and Shareholders of BSQUARE Corporation

 

We have audited the accompanying consolidated balance sheet of BSQUARE Corporation and subsidiaries as of December 31, 2005, and the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the two years in the period ended December 31, 2005. Our audits also included the financial statement schedule listed at Item 15(a)(2) for the years ended December 31, 2005 and 2004. These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company’s internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of BSQUARE Corporation and subsidiaries at December 31, 2005, and the consolidated results of their operations and their cash flows for each of the two years in the period ended December 31, 2005, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule for the years ended December 31, 2005 and 2004, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

 

Seattle, Washington

February 24, 2006

BSQUARE CORPORATION

 

CONSOLIDATED BALANCE SHEETS

 

 

See notes to Consolidated Financial Statements.

BSQUARE CORPORATION

 

CONSOLIDATED STATEMENTS OF OPERATIONS

 

 

 

 

See notes to Consolidated Financial Statements.

BSQUARE CORPORATION