e10vk
Table of Contents

 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
Form 10-K
 
     
(Mark One)    
þ
  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
    For the fiscal year ended December 29, 2007
OR
o
  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
Commission file no. 000-51598
iROBOT CORPORATION
(Exact name of registrant as specified in its charter)
 
     
Delaware
  77-0259 335
(State or other jurisdiction of
incorporation or organization)
  (I.R.S. Employer
Identification No.)
     
63 South Avenue, Burlington, MA
(Address of principal executive offices)
  01803
(Zip Code)
 
(781) 345-0200
(Registrant’s telephone number, including area code)
 
 
 
 
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:
Common Stock, $0.01 par value per share     The NASDAQ Stock Market LLC
 
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT:
None
 
Indicate by check-mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o     No þ
 
Indicate by check-mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ
 
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one):
 
             
Large accelerated filer o
  Accelerated filer þ   Non-accelerated filer o
(Do not check if a
smaller reporting company)
  Smaller reporting company o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes o     No þ
 
The aggregate market value of the Common Stock held by nonaffiliates of the registrant was approximately $325,453,593 based on the last reported sale of the Common Stock on the NASDAQ Global Market on June 29, 2007.
 
As of February 22, 2008, there were shares 24,511,800 of the registrant’s Common Stock outstanding.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
The registrant intends to file a definitive Proxy Statement pursuant to Regulation 14A within 120 days of the end of the fiscal year ended December 29, 2007. Portions such Proxy Statement are incorporated by reference into Part III of this Form 10-K.
 


Table of Contents

 
iROBOT CORPORATION

ANNUAL REPORT ON FORM 10-K
Year Ended December 29, 2007

TABLE OF CONTENTS
 
                 
        Page
 
      Business     3  
      Risk Factors     19  
      Unresolved Staff Comments     34  
      Properties     34  
      Legal Proceedings     35  
      Submission of Matters to a Vote of Security Holders     35  
 
Part II
      Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities     36  
      Selected Financial Data     37  
      Management’s Discussion and Analysis of Financial Condition and Results of Operations     38  
      Quantitative and Qualitative Disclosures about Market Risk     58  
      Financial Statements and Supplementary Data     59  
      Changes in and Disagreements with Accountants on Accounting and Financial Disclosure     85  
      Controls and Procedures     85  
      Other Information     86  
 
Part III
      Directors, Executive Officers and Corporate Governance     86  
      Executive Compensation     86  
      Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters     86  
      Certain Relationships and Related Transactions, and Directors Independence     86  
      Principal Accounting Fees and Services     87  
 
Part IV
      Exhibits, Financial Statement Schedules     87  


2


Table of Contents

 
PART I
 
ITEM 1.    BUSINESS
 
This Annual Report on Form 10-K contains forward-looking statements. All statements other than statements of historical facts contained in this Annual Report on Form 10-K, including statements regarding our future results of operations and financial position, business strategy and plans and objectives of management for future operations, are forward-looking statements. These statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. We discuss certain of these risks in greater detail in the “Risk Factors” section and elsewhere in this Annual Report on Form 10-K. Also, these forward-looking statements speak only as of the date of this Annual Report on Form 10-K, and we have no plans to update our forward-looking statements to reflect events or circumstances occurring after the date of this Annual Report. We caution readers not to place undue reliance upon any such forward-looking statements.
 
iRobot, Roomba, Scooba, PackBot, Warrior, Looj, Verro, Create, ConnectR and AWARE are trademarks of iRobot Corporation. Gator, M-Gator and R-Gator are trademarks of Deere & Company.
 
Overview
 
iRobot Corporation (“iRobot” or the “Company”) provides robots that enable people to complete complex tasks in a better way. For over 18 years, we have developed proprietary technology incorporating advanced concepts in navigation, mobility, manipulation and artificial intelligence to build industry-leading robots. Our Roomba floor vacuuming robots, Scooba floor washing robot and Looj gutter cleaning robot perform time-consuming domestic chores, and our PackBot tactical military robots perform battlefield reconnaissance and bomb disposal. In addition, we are developing the Small Unmanned Ground Vehicle reconnaissance robot for the U.S. Army’s transformational Future Combat Systems, or FCS, program. We sell our robots to consumers through a variety of distribution channels, including chain stores and other national retailers, and our on-line store, and to the U.S. military and other government agencies worldwide.
 
Since our founding by roboticists who performed research at the Massachusetts Institute of Technology, we have accumulated expertise in all the disciplines necessary to build durable, high-performance and cost-effective robots through the close integration of software, electronics and hardware. Our core technologies serve as reusable building blocks that we adapt and expand to develop next generation and new products, reducing the time, cost and risk of product development. For example, our proprietary AWARE Robot Intelligence Systems enable the behavioral control of robots. Our AWARE systems allow our Roomba floor vacuuming robot to clean an entire floor while avoiding obstacles and not falling down stairs, and also allow our PackBot robots to accomplish complex missions such as waypoint navigation and real-time obstacle avoidance.
 
Our significant expertise in robot design and engineering, combined with our management team’s experience in military and consumer markets, positions us to capitalize on the growth we expect in the market for robot-based products. We believe that the sophisticated technologies in our existing consumer and military applications are adaptable to a broad array of markets such as law enforcement, homeland security, commercial cleaning, elder care, oil services, home automation, landscaping, agriculture, construction and other vertical markets. Our strategy is to maintain a leadership position in pursuing new applications for robot solutions by leveraging our ability to innovate, to bring new products to market quickly, to reduce costs through design and outsourcing capabilities, and to commercialize the results of our research, much of which is government funded.
 
Over the past five years, we sold more than 3 million of our home care robots. We also sold during that time more than 1,200 of our PackBot tactical military robots, most of which have been sold to the U.S. military and deployed on missions in Afghanistan and Iraq.


3


Table of Contents

Strategy
 
Our objective is to rapidly invent, design, market and support innovative robots that will expand our leadership globally in our existing and newly addressable markets. Key elements of our strategy to achieve this objective include:
 
Deliver Great Products and Continue to Expand Our Existing Markets.  Our success is built upon our ability to deliver a broad range of innovative products rapidly at economical price points and to offer a broad product line to our customers. Within the consumer market today we offer floor cleaning products for various surfaces at multiple price points, a gutter cleaning product, a pool cleaning product, and a number of product accessories. We are extending our military robot offerings from small, unmanned ground vehicles (such as our PackBot line of robots) to full-scale autonomous vehicles such as R-Gator. In addition, we intend to leverage our increasing installed base to expand our revenues from recurring sales of consumables, services and support.
 
Innovate to Penetrate New Markets.  Our goal is to develop innovative robots to perform dull, dirty or dangerous tasks. We develop robots with functionalities that are adaptable for use in a broad range of applications. We intend to target new markets, such as law enforcement, homeland security, commercial cleaning, elderly care, oil services, home automation, landscaping, agriculture and construction, where robots can create high value and can provide a better way to complete complex tasks.
 
Leverage Research and Development Across Different Products and Markets.  We leverage our research and development across all of our products and markets. For example, we use technological expertise developed through government-funded research and development projects across our other product development efforts. Similarly, expertise developed while designing consumer products is used in designing products for government and industrial applications. This strategy helps us in avoiding the need to start each robot project from scratch, developing robots in a cost-effective manner and minimizing time to market.
 
Continue to Strengthen Our Brand.  We intend to continue to enhance our brand image and corporate identity. The iRobot brand is designed to communicate innovation, reliability, safety and value. Our robots’ performance and uniqueness have enabled us to obtain strong word-of-mouth and extensive press coverage leading to increasing brand awareness, brand personality and momentum. We intend to continue to invest in our marketing programs to strengthen our brand recognition and reinforce our message of innovation, reliability, safety and value.
 
Continue to Invest Aggressively in Our Business and Our People.  We believe the best path to maximizing long-term profit is to continue to invest significant resources in our business and our people over the next several years. We plan to invest in research and development and sales distribution channels to extend and expand our market. We intend to also continue to hire top talent and invest in our people through training and on-the-job experience. We believe this aggressive reinvestment in our business and our people will help us maintain our market leadership.
 
Complement Core Competencies with Strategic Alliances.  Our core competencies are the design, development and marketing of robots. We rely on strategic alliances to provide complementary competencies that we integrate into our products and to enhance market access. For example, our alliance with The Boeing Company allows us to accelerate product development of the SUGV, through extensive use of Commercial Off The Shelf (COTS) components, our alliance with Advanced Scientific Concepts, Inc. (ASC) allows us to integrate LADAR technology for navigation and mapping applications into our autonomous vehicles, our alliance with TASER International, Inc. allows us to integrate TASER electronic control devices built on our PackBot robot platforms, our alliance with Deere & Company allows us to integrate our robot controls, navigation and obstacle avoidance systems with rugged vehicles manufactured by Deere & Company, our alliance with The Clorox Company, through which Clorox manufactures cleaning fluid, allows us to integrate world-class cleaning technology and know-how into our Scooba floor washing robot. We outsource other non-core activities, such as manufacturing and back-office functions, which helps us focus our resources on our core competencies.
 
Develop a Community of Third-Party Developers Around Our Platforms.  We have developed products around which communities of third-party developers can create related accessories, software and complementary products. We intend to foster this community by making our products into extensible platforms with open interfaces


4


Table of Contents

designed to carry payloads. For example, our robots are designed to allow third-party designers to add sensors and other functionalities, such as acoustic sniper detection and web-based control.
 
Technology
 
We are focused on behavior-based, artificially-intelligent systems developed to meet customer requirements in multiple market segments. In contrast to robotic manufacturing equipment or entertainment systems that are designed to repeat actions in specific, known environments, our systems are designed to complete missions in complex and dynamic real-world environments.
 
Our robots rely on the interplay among behavior-based artificially intelligent systems, real-world dynamic sensors, user-friendly interfaces and tightly-integrated, electromechanical designs to accomplish their missions efficiently.
 
AWARE Robot Intelligence Systems.  Our proprietary AWARE Robot Intelligence Systems are code bases that enable the behavioral control of robots. Moreover, the AWARE systems include modules that control behaviors, sensor fusion, power management and communication. Our AWARE systems allow our Roomba floor vacuuming robot and our Scooba floor washing robot to clean an entire floor while avoiding obstacles and not falling down stairs, and also allow our PackBot robots and our unmanned ground vehicles to accomplish complex missions such as waypoint navigation and real-time obstacle avoidance.
 
Real-World, Dynamic Sensing.  The degree of intelligence that our robots display is directly attributable to their ability to perceive — or sense — the world around them. Using specialized hardware and signal processing, iRobot has developed sensors that fit particular cost-performance criteria. In other cases, we use off-the-shelf sensing hardware, such as laser scanners, cameras and optical sensors. We have recently entered into an agreement with Advanced Scientifics Concepts, Inc. for exclusive rights to use its patented 3D Flash Laser Radar, or LADAR, technology for unmanned ground vehicles and robots. This Flash LADAR technology is a next-generation solid state sensor that marks an important advancement for navigation and mapping applications for all autonomous vehicles. Additionally, we have an agreement with ICx Technologies to integrate its explosive-detecting technology into our Packbot platform. The payload, called the ICx Fido for iRobot PackBot 500, can detect explosive vapors emanating from Improvised Explosive Devices (IED’s).
 
User-Friendly Interfaces.  Our robots require that users interact and instruct our robots in intuitive ways without extensive end-user set-up, installation, training or instruction. For example, our Roomba robots require only one button to have the robot begin its mission, determine the size of the room to be cleaned, thoroughly clean the room and return to its re-charger, right out of the box without any pre-programmed knowledge of the user’s home. Similarly, our PackBot robots use intuitive controllers, interoperable between systems, that integrate high-level supervisory commands from the user into the behaviors of the robot.
 
Tightly-Integrated, Electromechanical Design.  Our products rely on our ability to build inherently robust integrated electrical and mechanical components into required form factors. For instance, the computer that powers the PackBot tactical military robot must withstand being dropped from more than ten feet onto concrete. Such high performance specifications require tight design integration.
 
Combining these four components, we have created proprietary, reusable building blocks of robotics capabilities, including mobility platforms, manipulators, navigation and control algorithms and user interfaces. Our technology building blocks typically allow us to take a known platform and modify it for a new mission instead of starting from scratch for each application. We believe this allows us to design and develop innovative robots cost-effectively.
 
Products and Development Contracts
 
We design and sell robots for the consumer and government and industrial markets.


5


Table of Contents

Consumer Products
 
We sell various products that are designed for use in and around the home. Our current consumer products are focused on both indoor and outdoor cleaning applications. We believe our consumer products provide value to our customers by delivering better cleaning solutions at an affordable price and by freeing people from repetitive home cleaning tasks.
 
Home Floor Cleaning Robots.  Over the past five years, we sold more than 3 million home floor cleaning robots. We currently offer multiple Roomba floor vacuuming robots and Scooba floor washing robots with varying price points and performance characteristics.
 
Our Roomba robot’s compact disc shape allows it to clean under beds and other furniture, resulting in cleaner floors since the Roomba can access more of the floor than standard upright vacuum cleaners. Roomba is programmed to keep operating until the floor is clean. In addition, Roomba eliminates the need to push a vacuum — it cleans automatically upon the push of a button.
 
All of our current Roomba floor vacuuming robots include the following features:
 
  •  the ability to sense a “cliff” or drop-off point and to react by reversing course automatically;
 
  •  a non-marring bumper to clean up to obstacles without damaging furniture or walls;
 
  •  a self adjusting cleaning head;
 
  •  a wide cleaning path to clean an entire room on a single battery charge;
 
  •  a spinning side brush to clean along surface edges;
 
  •  dirt-sensing, which allows the Roomba robot to detect dirtier areas in the home and respond by increasing and extending the intensity of its cleaning efforts in that concentrated space; and
 
  •  improved cleaning and maintenance operations, enhancing the user friendliness of the Roomba robot.
 
Select Roomba models also feature automatic self-docking, which enables the robot to return to its Home Base for battery recharging when its battery runs low or it has cleaned the room, and an advanced power system that charges in approximately three hours. These Roombas can clean, on average, three rooms on a single charge.
 
In 2007, we introduced our new Roomba 500 series, which features more powerful and efficient vacuuming performance. These robots can free themselves from almost any household jam, minimizing the need to prep rooms before Roomba begins cleaning. Using wireless technology, the robots now know when they have finished cleaning one room and then move on to the next.
 
The Roomba 500 series includes the following new features:
 
  •  a solid, heavy-duty design featuring modular components for enhanced durability and easy servicing;
 
  •  anti-tangle technology so Roomba can extract itself from tassels and cord tangles;
 
  •  our proprietary built-in, light-touch intelligent sensing system that can detect when Roomba is approaching a wall or obstacle and automatically slow the robot for a gentler impact and quieter operation;
 
  •  one-button activation, simply press “clean” and go;
 
  •  a built-in voice tutorial for new users that demonstrates Roomba’s features right out of the box;
 
  •  a new mobility platform that allows Roomba to travel on thicker carpets, climb higher thresholds, and transition easily between floor surfaces;
 
  •  new dustbin holds significantly more debris; and
 
  •  colorful faceplates in white, steel blue, champagne, burnt orange, silver, charcoal, and chestnut so people can personalize Roomba to match their style.


6


Table of Contents

 
The Roomba 530 includes all of these features and cleans up to three standard rooms before returning to its Home Base to recharge. Roomba 530 also comes with two standard Virtual Walls that confine the robot to certain areas using an infrared beam. The suggested retail price for the Roomba 530 is $299.
 
The iRobot Roomba 560 includes Virtual Wall Lighthouses. These mini-towers — just 4.25 inches tall by 3.5 inches wide — help orient Roomba via radio frequency communications and guide Roomba systematically through the home. The Virtual Wall Lighthouses confine the Roomba to one room until that room is thoroughly cleaned, and then guide Roomba into the next room. Once Roomba 560 is finished cleaning, or when its battery is running low, the Virtual Wall Lighthouses direct the robot to its Home Base to dock and recharge. Roomba 560 also includes an on-board scheduling function, so it can be programmed to automatically clean up to seven days a week, even when owners are away. The suggested retail price for the Roomba 560 is $349.
 
Scooba, our second major consumer product line, is the first floor washing robot available for home use. Our Scooba robot utilizes the expertise gained from years of Roomba development to create a robot that scrubs your floor.
 
Our Scooba robot’s innovative cleaning process allows the robot to simultaneously sweep, wash, scrub and dry hard floors, all at the touch of a button. Unlike a conventional mop that spreads dirty water on the floor, Scooba will apply only fresh water and cleaning solution to the floor from a clean tank. Scooba will clean wet spills in addition to dirt and grime, and it is safe for use on all sealed, hard floor surfaces, including wood and tile.
 
Scooba has the ability to navigate around the room using a light-touch bumper and is smart enough to avoid carpets. Scooba features an advanced diagnostic system to provide the user with important maintenance feedback and improve user experience and product life. The suggested retail price for the Scooba robots range from $249 to $499.
 
With The Clorox Company, we have developed a specially-engineered cleaning solution for use with the Scooba floor washing robot. We began collaborating with The Clorox Company in 2004 to create a cleaning solution that, when combined with the Scooba, would clean hard floor surfaces and assist in the mobility of the robot.
 
Pool Cleaning Robots
 
In 2007, we introduced our Verro Pool Cleaning Robot, which is used to clean a standard size pool in about an hour while removing debris as small as two microns from the pool floor, walls and stairs. Verro is brought to market under the iRobot brand through a relationship with the Aqua Products Group companies including AquaJet LLC and Aquatron, Inc., which developed the pool-cleaning robots. There are two models available with suggested retail prices of $799 and $1,199, respectively.
 
Gutter Cleaning Robots
 
In 2007, we introduced our Looj Gutter Cleaning Robot, which is designed to simplify the difficult and dangerous job of gutter cleaning. The Looj cleans an entire stretch of gutter from one location, reducing the number of times a ladder must be repositioned and climbed during gutter cleaning. The 2.25-inch high Looj drives easily under gutter straps propelled by a three-stage auger that dislodges and sweeps out dirt, leaves and other debris that can cause costly water damage, overspills and ice dams.
 
The Looj also features a detachable handle that doubles as a wireless remote control, providing full control of the robot while cleaning. The suggested retail price for the Looj ranges from $99 to $129.
 
Virtual Visiting Robot
 
In 2007, we announced our ConnectR Virtual Visiting Robot to be released at a future date. The ConnectR marks our entry into a new category of virtual communication and interaction, a significant step beyond our traditional universe of cleaning and maintenance. ConnectR is a new kind of communications system designed for today’s busy families and individuals seeking greater connection and involvement with kids, grandchildren, friends and pets. Product development is ongoing and the ConnectR is not yet available to the consumer market.


7


Table of Contents

Programmable Robot
 
In 2007, we introduced the Create Programmable Robot, which is a fully assembled programmable robot. The Create has 10 built in demos and 32 sensors that allow users to experiment with robotics. An open cargo bay allows the user to add their own grippers, wireless connections, computers or other hardware. The Create is based on the iRobot Roomba technology and is compatible with Roomba’s re-chargeable batteries, remote control and other accessories. The suggested retail price for the Create ranges from $129 to $299.
 
Government and Industrial Products
 
Our current government and industrial product offerings include our PackBot and PackBot 510 line of small, unmanned ground robots and the prototype R-Gator unmanned ground vehicle. Our government and industrial robots are designed for high-performance, durability and ease of use. Our PackBot family of robots is based on a common platform and is currently priced from approximately $50,000 to $185,000 per unit. As of December 2007, more than 1,200 PackBot robots had been delivered worldwide.
 
In 2007 we brought to market the next generation PackBot, the PackBot 510. The PackBot 510 was designed specifically to address evolving end-user requirements for a stronger, faster and easier-to-use robot. Thirty percent faster than its predecessor, the robot features greater top-end speed to reduce deployment time. It also features increased torque, resulting in greater load pull/load capacity. Its rounded cleats reduce detracking and optical fiber entanglement. The robot’s new hand controller is modeled after video-game controllers, making PackBot 510 easier to use, and resulting in less training time and more rapid operations in the field. The PackBot 510 currently is offered in 2 main kit configurations:
 
iRobot PackBot 510 with EOD Kit.  This advanced robot quickly adapts to different Improvised Explosive Devises or IEDs, conventional ordnance and SWAT missions — keeping EOD personnel at safe stand-off distances. It features an enhanced chassis, improved manipulator, simplified hand controller and four cameras, making it faster, stronger and easier to-use. Relative to the standard PackBot EOD, the more powerful manipulator doubles lifting, carrying and manipulation capacity.
 
iRobot PackBot 510 with FasTac Kit.  This robot investigates suspicious objects and identifies roadside bombs and other IEDs, as well as unexploded ordnance, while keeping troops at safe standoff distances. As a lighter-weight alternative to other EOD robots, PackBot 510 with FasTac Kit is practical for infantry use.
 
We also offer more than 45 accessories of the PackBot that constitute additional capabilities for the robot, expanding its range and scope of missions.
 
We continue to sell and support our original PackBot line. Popular configurations include those listed below.
 
iRobot PackBot Scout.  PackBot Scout is a portable, tactical, mobile robot designed for military operations in urban terrain and other 21st century battle missions. This lightweight, rugged robot can be hand-carried and deployed by a single soldier. Deployed in Afghanistan and Iraq for the past several years, PackBot Scout is designed to search dangerous or inaccessible areas, providing soldiers with a safe first look so they know what to expect and how to respond. Only 40 lbs (18 kg) fully loaded, PackBot Scout offers five open payload bays for significant upgrade potential. The PackBot Scout is our most rugged PackBot configuration, able to sustain a 10-foot drop onto concrete and still function properly.
 
iRobot PackBot Explorer.  PackBot Explorer is designed for performing real-time targeting and battle damage assessment in dangerous or inaccessible areas or other urban warfare scenarios. PackBot Explorer can enter the danger zone before responders are exposed to risk and function as the incident commander’s remote information gatherer. PackBot Explorer can help assess the situation, ensure the appropriate response, and reduce risk.
 
iRobot PackBot EOD.  PackBot EOD is a rugged, lightweight robot designed to conduct explosive ordnance disposal, hazardous materials, search-and-surveillance and other vital law enforcement tasks for bomb squads, SWAT teams, military units and other authorities. PackBot EOD can handle a full range of improvised explosive devices and conventional ordnance disposal challenges. Our PackBot EOD robot’s lightweight and rugged OmniReach Manipulator System can extend up to six feet to safely disrupt improvised explosive devices, military ordnance, land mines and other incendiary devices.


8


Table of Contents

iRobot PackBot with ICx Fido Explosives Detection Kit.  This explosives-sniffing robot screens packages and other potentially dangerous items while the operator remains at a safe distance. With all-terrain capability that enables it to go virtually anywhere, the robot places ultra-sensitive detectors close to suspicious items and determines within seconds if they are hazardous or harmless. The iRobot PackBot with ICx Fido Explosives Detection Kit is an advanced security solution that also pinpoints people involved in the construction and deployment of explosive devices.
 
R-Gator Unmanned Ground Vehicle.  The R-Gator combines the field-proven technologies of the Deere & Company M-Gator and our PackBot with state-of-the-art robot controls, navigation and obstacle detection technologies jointly developed for R-Gator’s critical missions. The iRobot-John Deere R-Gator is a versatile and rugged platform capable of taking on a wide variety of critical unmanned missions, such as a perimeter guard, unmanned scout, “point man,” supply carrier and more. In conjunction with Deere & Company, we have made available a limited number of R-Gator prototypes for evaluation by a number of potential government customers. The net future proceeds of R-Gator sales, if any, will be shared between us and Deere & Company, subject to recoupment of each party’s respective contribution to the project.
 
Contract Research and Development Projects
 
We are involved in several contract development projects with various U.S. governmental agencies and departments. The durations of these projects range from a few months to several years. These projects are usually funded as either cost-plus arrangements, firm fixed price, or time and materials contracts. In a cost-plus contract, we are allowed to recover our actual costs plus a fixed fee. The total price on a cost-plus contract is based primarily on allowable costs incurred, but generally is subject to a maximum contract funding limit. Under a firm fixed price contract, we receive a fixed amount upon satisfying contractually defined deliverables. On our time and materials contracts, we recover a specific amount per hour worked based on a bill rate schedule, plus the cost of direct materials, subcontracts, and other non-labor costs, including an agreed-upon mark-up. A time and materials contract may provide for a not-to-exceed price ceiling, as well as the potential that we will absorb any cost overrun.
 
Government funding is provided to further the development of robot technologies to solve various in-field challenges and with the expectation that if the projects result in the development of technically viable prototypes, then the government will purchase multiple production units for future use in the field. The government funding that we receive allows us to accelerate the development of multiple technologies. While the U.S. government retains certain rights to military projects that it has funded, such as the right to use inventions and disclose technical data relating to those projects without constraining the recipient’s use of that data, we retain ownership of patents and know-how and are generally free to develop other commercial products, including consumer and industrial products, utilizing the technologies developed during these projects. The rights which the government retains, however, may allow it to provide use of patent rights and know-how to others, and some of the know-how might be used by these third parties for their own development of consumer and industrial products. The contract development projects that we are currently undertaking include, but are not limited to:
 
Small Unmanned Ground Vehicle (SUGV) and Centralized Controller Device (CCD).  Future Combat Systems (FCS) is a major program intended to transform the U.S. Army to be strategically responsive and dominant at every point on the spectrum of operations, through real-time network centric communications and systems of a family of manned vehicles and unmanned platforms by the next decade. The FCS program combines advanced technologies, organizations, people and processes with concepts to create new sources of military power that are more responsive, deployable, agile, versatile, lethal, survivable and sustainable. The FCS system of systems is designed to provide increased strategic responsiveness, adaptive modular organizations, and units of action with three to seven days of self-sustainment.
 
Our specific role in the FCS program is to design and develop the SUGV, which is intended to be the “soldier’s robot.” The SUGV is expected to be a light-weight, man-portable robot that will support reconnaissance, remote sensing and urban warfare. In addition, we have been selected by Lockheed Martin Corporation, the provider of the CCD for the FCS program, to be a key supplier of design and development for the CCD’s controls and display through its estimated delivery in 2015. The CCD is a handheld device that will allow an individual soldier to remotely control or query the systems in an FCS brigade — from a Class I


9


Table of Contents

Unmanned Aerial Vehicle to an unmanned ground system. Our involvement in the FCS program has enabled us to improve various management and control systems and enhance our engineering capabilities to achieve the Software Executive Institute’s Configuration Maturity Model certification Level III. The program has also funded the development of earned value measurement and advanced modeling and simulation.
 
Warrior (formerly named NEOMover).  Warrior is a 250-pound tracked vehicle, capable of transporting up to 150 pounds of payload, with a small footprint and extreme mobility. This effort is sponsored by the Technical Support Working Group, or TSWG. The Warrior design incorporates a number of concepts present in other iRobot remote controlled vehicles and demonstrates many of the advantages that modular payloads and common interfaces can bring to the explosive ordnance disposal community. There are two goals of this effort. The first is to advance the maturity levels of the Warrior hardware, firmware and software, and to enhance environmental ruggedness to a level suitable for small quantity manufacturing and evaluation of Warrior platforms in field trials. The second is to maintain a level of architectural openness for future component integration with other TSWG common architecture components to enable continued future development.
 
Sentinel.  Sentinel is an applied research project funded by the U.S. Army Tank — Automation and Armaments Command, or TACOM. Unmanned Ground Vehicles, or UGVs, have taken an increasingly prominent role in the modern battlespace, whether providing intelligence, surveillance and reconnaissance, or performing vital force protection functions such as searching for vehicle-borne improvised explosive devices. In order for these unmanned systems to realize their full potential as a force multiplier, they must grow beyond their one-operator-per-vehicle command and control metaphors. Sentinel is aimed at developing intuitive user interface technologies and UGV autonomy allowing a single human operator to effectively control and coordinate multiple semi-autonomous UGVs.
 
UGV/UAV Collaborative Engagement.  In coordination with researchers from Carnegie Mellon University, the goal of this U.S. Army Armament Research, Development and Engineering Center (ARDEC)-funded project is to develop a collaborative engagement tool for mission planning and task allocation for the command and control of multiple unmanned air and ground vehicles. The primary project objective of this effort is to design an automated software tool that facilitates the dynamic collaboration of unmanned air and ground vehicles to enable effective joint operations. This capability will be demonstrated in a mission scenario using a UAV to find, identify, and locate a target of interest on the ground, for example a suspicious vehicle, and then automatically engaging a UGV to navigate to the designated target to provide precise location and ground-based tracking.
 
We are engaged in a number of other research programs funded by the U.S. Army Research, Development & Engineering Center, or ARDEC, TACOM, and several other U.S. governmental agencies.
 
Strategic Alliances
 
Our strategic alliances are an important part of our product development and distribution strategies. We rely on strategic alliances to provide technology, complementary product offerings and increased and quicker access to markets. We seek to form relationships with those entities that can provide best-in-class technology or complementary market advantages for establishing iRobot technology in new market segments.
 
Among the strategic alliances we have established with commercial entities are the following:
 
The Boeing Company.  We have entered into a strategic business agreement with The Boeing Company to develop and market a commercial version of the SUGV that is being developed under the Army’s FCS program. This collaboration will accelerate product development, though extensive use of Commercial Off The Shelf (COTS) components, to produce a commercial version of the SUGV robots several years earlier than previously planned for use by our U.S. military, domestic and international customers. In addition to cooperative development, we will be working jointly with The Boeing Company, leveraging its extensive, domestic and international marketing network, to market the new commercial SUGV product.
 
Advanced Scientific Concepts, Inc. (ASC).  We have entered into an agreement, in fiscal 2007, for exclusive rights to use ASC’s patented 3D Flash Laser Radar, or LADAR, technology for unmanned ground vehicles in exchange for future commitments to purchase units. ASC’s patented Flash LADAR technology is a


10


Table of Contents

next-generation solid state sensor that marks an important advancement for navigation and mapping applications for all autonomous vehicles. Flash LADAR sensors have no moving parts and can be compact, light and rugged, making them highly suitable for military and industrial uses. We will assist ASC in designing versions of its LADAR technology for use on our military robots ranging from the SUGV to Intelligent Vehicles such as R-Gator. We expect to demonstrate the technology to military customers starting in 2008, with delivery of a product expected in 2009.
 
TASER International, Inc.  We have entered into a strategic business agreement, in fiscal 2007, to develop new robots that can remotely engage, incapacitate and control dangerous suspects with integrated TASER electronic control devices, built on our PackBot robot platforms.
 
Deere & Company.  We have a strategic business agreement with the commercial and consumer equipment division of Deere & Company to explore multiple projects involving technology and product development and commercialization efforts. We have collaborated with Deere & Company on the development of the R-Gator unmanned ground vehicle. Deere & Company has provided funded research and development, access to its M-Gator military utility vehicle platform and certain other technology, and we have provided robot technologies. Technology independently developed by either Deere & Company or us will be owned by the developing party. We and Deere & Company have produced a limited number of R-Gator prototypes for evaluation by potential customers.
 
The Clorox Company.  We have entered into a joint development and license agreement with The Clorox Company, whereby Clorox is the exclusive provider of the cleaning solution for the Scooba floor washing robot. Our alliance with The Clorox Company allows us to integrate their cleaning technology and know-how into our floor washing robot and improves consumer perception and awareness of our brand by association and through joint marketing.
 
Our strategy of working closely with third parties extends to the design of our products. By offering extensible platforms designed to carry payloads, we have designed and manufactured our products to leverage the work of those individuals and organizations that offer specialized technological expertise. The PackBot, the Roomba and the Scooba robots are designed with open interfaces that allow third-party designers to add sensors or other functionality to our robots.
 
Sales and Distribution Channels
 
We sell our products through distinct sales channels to the consumer and government and industrial markets.
 
Home Robots
 
We sell our consumer products through a network of national retailers. In 2007, this network consisted of more than 30 retailers, representing over 7,000 stores in the United States, each of which sold some combination of these products. We also offer our products through the iRobot on-line store on our website. Internationally, our products are sold in over 40 countries, primarily through in-country distributors who resell to retail stores in their respective countries.
 
We have a philosophy to choose supportive channel partners, and we have grown, and intend to continue to selectively grow our retail network globally and by product line. We expanded to more than 30 retailers in 2007 from 20 retailers in 2006. Certain smaller domestic retail operations are supported by distributors to whom we sell product directly. The table below represents the breakdown of our home robots product revenue for the fiscal years ended December 29, 2007 and December 30, 2006.
 
                 
    Fiscal Year Ended  
    December 29,
    December 30,
 
Channel
  2007     2006  
 
Domestic
    61.6 %     72.7 %
International
    15.0       11.3  
Direct
    23.4       16.0  
                 
Total
    100.0 %     100.0 %


11


Table of Contents

Although our retail network is our primary distribution channel for our consumer products, the continued investment in our direct-to-consumer offerings through the iRobot on-line store has resulted in this direct channel increasing to 23.4% of home robots division revenue in fiscal 2007 compared to 16.0% in fiscal 2006. We have established valuable databases and customer lists that allow us to target directly those consumers most likely to purchase a new robot or upgrade. We believe we maintain a close connection with our customers in each of our markets to provide an enhanced position from which to improve our distribution and product offerings.
 
In the United States, we maintain an in-house sales and product management team of 14 employees, and we have an international sales force of 3 employees. Outside of the United States and Canada, we sell our consumer products through distributors. Our consumer distribution strategy is intended to increase our global penetration and presence while maintaining high quality standards to ensure end-user satisfaction.
 
Government and Industrial
 
We sell our government and industrial products directly to end users and indirectly through prime contractors and distributors. While the majority of government and industrial products have been sold to date to various operations within the U.S. federal government, we also sell to state and local as well as to international government organizations. Our military products are sold overseas in compliance with the International Traffic in Arms Regulations, or ITAR. We have sold our products to the governments of various countries in the past several years, including the United Kingdom, France, Germany, Sweden, Norway, Israel, Australia, Republic of Korea, Singapore and others.
 
Customers for our government products, and research & development contracts for the year ended December 29, 2007, include:
 
     
Robot Product Customers
 
Research and Development Contracts
 
• U.S. Army
 
• U.S. Army Future Combat Systems (FCS) Program
• U.S. Marine Corp
 
• U.S. Defense Advanced Research Projects Agency (DARPA)
• U.S. Army and Marine Corp Robotic Systems Joint Program Office
 
• U.S. Space and Naval Warfare Systems Command (SPAWAR)
• U.S. Navy EOD Technical Division (Joint Services Explosive Ordnance Disposal Procurement Agency)
 
• U.S. Army Tank-Automotive and Armaments Command (TACOM)
• U.S. Air Force
 
• Technical Support Working Group (TSWG)
• Domestic Police and First Responders
 
• U.S. Army Armament Research, Development and Engineering Center (ARDEC)
• Foreign governments, including the United Kingdom, France, Germany, Sweden, Norway,
  • National Center for Defense Robotics (NCDR)
Israel, Australia, Republic of Korea, Singapore
 
• Office of Naval Research (ONR)
 
Our government products are sold by a team of 12 government sales specialists with significant experience in selling to government and defense agencies. All of these individuals have years of experience selling military products to government procurement offices, both in the United States and internationally. We maintain a single person direct sales and support presence in Europe.
 
Customer Service and Support
 
We also invest in our ongoing customer service and support. Consumer customer service representatives, the majority of whom are employees of outsourced service organizations, are extensively trained on the technical intricacies of our consumer products. Government and industrial customer representatives are usually former military personnel who are experienced in logistical and technical support requirements for military operations.


12


Table of Contents

Marketing and Brand
 
We market our home robots in the United States to end-user customers directly through our sales and product management team of 14 employees. We also market our consumer products in the United States through our retail network of more than 30 national retailers and internationally through in-country distributors and our international sales team of 3 employees. We market our government and industrial products directly through our team of 12 government sales specialists to end users and indirectly through prime contractors. We also market our product offerings through the iRobot website. Our marketing strategy is to increase our brand awareness and associate the iRobot brand with innovation, reliability, safety and value. Our sales and marketing expenses represented 18.0% of our total revenue in both 2007 and 2006.
 
We believe that we have built a trusted, recognized brand by providing high-quality robots. We believe that customer word-of-mouth has been a significant driver of our brand’s success to date, which can work very well for products that inspire a high level of user loyalty because users are likely to share their positive experiences. Our grass-roots marketing efforts focus on feeding this word-of-mouth momentum and we use public relations as well as advertising to promote our products.
 
Our innovative robots and public relations campaigns have generated extensive press coverage. In addition, iRobot and our consumer robots have won several awards and our inclusion as the only small business among the first-tier partners on the FCS program has greatly enhanced our brand and awareness among government and industrial customers. Through these efforts, we have been able to build our brand, and we expect that our reputation for innovative products and customer support will continue to play a significant role in our growth and success.
 
We expect to accelerate our investment in national advertising, consumer and industry trade shows, direct marketing and public relations to further build brand awareness. We believe that our significant in-house experience designing direct marketing campaigns and promotional materials, combined with our media-targeting expertise, gives us a significant competitive advantage.
 
Our website is also playing an increasing role in supporting brand awareness, addressing customer questions and serving as a showcase for our products. Our home robots and accessories are also sold through our online store. In 2007, the online store was the single largest outlet of our home robots division products.
 
Manufacturing
 
Our core competencies are the design, development and marketing of robots. Our manufacturing strategy is to outsource non-core activities, such as the production of our robots, to third-party entities skilled in manufacturing. By relying on the outsourced manufacture of both our consumer and military robots, we can focus our engineering expertise on the design of robots.
 
Using our engineering team, we believe that we can rapidly prototype design concepts and products to achieve optimal value, produce products at lower cost points and optimize our designs for manufacturing requirements, size and functionality.
 
Manufacturing a new product requires a close relationship between our product designers and the manufacturing organizations. Using multiple engineering techniques, our products are introduced to the selected production facility at an early-development stage and the feedback provided by manufacturing is incorporated into the design before tooling is finalized and mass production begins. As a result, we believe that we can significantly reduce the time required to move a product from its design phase to mass production deliveries, with improved quality and yields.
 
We outsource the manufacturing of our consumer products to two contract manufacturers, Jetta Company Limited and Kin Yat Industrial Co. Ltd., each of which manufactures our consumer products at a single plant in China. Jetta Company Limited has been manufacturing products since 1977 and brings substantial experience to our production requirements. Jetta Company Limited has several manufacturing locations and recently expanded one of its facilities to increase capacity for the production of our Roomba 400 series and Scooba robots. Kin Yat Industrial Co. Ltd. has been in business since 1981, has several manufacturing locations in China, and began manufacturing our Roomba 500 series in 2007. Combined with our own engineering operations in India and Hong Kong, this


13


Table of Contents

allows us to design our products in both the United States and India, use our own engineers in the United States, India and Hong Kong as technical interfaces with the facilities in China, and benefit from the experience of Jetta Company Limited, Kin Yat Industrial Co. Ltd. and their engineers.
 
Our government and industrial products are manufactured by Gem City Engineering Corporation at one plant in Dayton, Ohio. Gem City Engineering Corporation’s location is particularly important as military products supplied to the U.S. government must have the majority of their content manufactured in the United States. Gem City Engineering Corporation has multiple facilities and relies on other subcontractors for certain component manufacturing capabilities. Gem City Engineering Corporation has been in the business of manufacturing primarily metal-tooled products since 1936, and has produced numerous products for military contractors. We believe that its engineers are skilled in the production of products meeting military specifications, preparing final products for military inspection and conducting quality reviews.
 
Research and Development
 
We believe that our future success depends upon our ability to continue to develop new products and product accessories, and enhancements to and applications for our existing products. For the years ended December 29, 2007, December 30, 2006 and December 31, 2005, our research and development expenses were $17.1 million, $17.0 million and $11.6 million, respectively. In addition to our internal research and development activities, for the years ended December 29, 2007, December 30, 2006 and December 31, 2005, we have incurred research and development expenses under funded development arrangements with governments and industrial third parties of $18.8 million, $15.6 million and $12.5 million, respectively. Of our total research and development spending in 2007 and 2006, approximately 37.9% and 36.4%, respectively was funded by government-sponsored research and development contracts. We intend to continue our investment in research and development to respond to and anticipate customer needs, and to enable us to introduce new products over the next few years that will continue to address our existing market sectors.
 
Team Organization
 
Our research and development is conducted by small teams dedicated to particular projects, examples of which include the Roomba team, Scooba team, Warrior team and PackBot team. In connection with our FCS SUGV program involving more than 50 employees, we have instituted a formal integrated product team structure consisting of integrated System of Systems, Integrated Logistical Support, Program Operations and Business Operations teams to work together to deliver a platform that integrates with the FCS system of systems.
 
Global Engineering
 
Our domestic research and development efforts are primarily located at our headquarters in Burlington, Massachusetts, and our special projects engineering office in San Luis Obispo, California. In addition, we have an engineering design center in India and a product development team working out of Hong Kong. Our global engineering development process for consumer products allows us to leverage the time differences between our United States operations and our teams in Asia resulting in a fast, low cost global design and manufacturing cycle.
 
The first stage of the cycle takes place in both our Burlington, Massachusetts and Mysore, India offices where we focus on product definition, prototyping, market research and financial analysis. We then create a design that is manufacturable, including complete modeling and simulation and initial validation of the product/market concept. After the initial development of the prototypes, we leverage the team in Hong Kong for the production stage of the cycle.
 
During this stage, engineers on two continents work on refining the designs, preparing the product for manufacturing and working through the issues for pilot production, including detailed regression testing. The product is then turned over to the contract manufacturer for volume production.


14


Table of Contents

Spiral Development
 
One of the methods we use to develop military products is a “spiral development” process to get field tested equipment to the troops more quickly. After we develop a new product or product upgrade that will fulfill the desired requirements of the user, the product is tested with soldiers in the field. The user provides performance feedback on the product to the in-field engineer. Revisions are made quickly to retest in the field. This method has allowed our research and development team to not only make revisions on existing products quickly and efficiently, but also capture feedback for future upgrades and innovations to meet user needs. Periodically we send engineers in the field with our PackBot tactical military robots to solicit feedback from users which is often times incorporated into future product development and product enhancements. We intend to solicit similar user feedback in the field for the prototype intelligent vehicles.
 
Leveraged Model
 
Our research and development efforts for our next-generation products are supported by a variety of sources. Our next-generation military products are predominately supported by U.S. governmental research organizations such as the Defense Advanced Research Projects Agency, or DARPA, U.S. Space and Warfare Command, or SPAWAR, Technical Support Working Group, or TSWG, U.S. Army Tank-Automotive and Armaments Command, or TACOM, U.S. Army Armament Research, Development and Engineering Center, or ARDEC, and the U.S. Army’s FCS program. While the U.S. government retains certain rights in the research projects that it has funded, we retain ownership of patents and know-how and are generally free to develop other commercial products, including consumer and industrial products, utilizing the technologies developed during these projects. Similarly, expertise developed while designing consumer products is used in designing products for government and industrial applications. We also work with strategic collaborators to develop industry-specific technologies. Moreover, we continue to reinvest in advanced research and development projects to maintain our technical capability and to enhance our product offerings.
 
Competition
 
The market for robots is highly competitive, rapidly evolving and subject to changing technologies, shifting customer needs and expectations and the likely increased introduction of new products. We believe that a number of established companies have developed or are developing robots that will compete directly with our product offerings, and many of our competitors have significantly more financial and other resources than we possess. Our current principal competitors include:
 
  •  developers of robot floor care products such as AB Electrolux, Alfred Kärcher GmbH & Co., Samsung Electronics Co., Ltd., LG Electronics Inc., Infinuvo/Metapo, Inc, Matsutek Enterprises Co Ltd., Microrobot CO., Ltd., ACE ROBOT Co., Ltd. and Yujin Robotic Co. Ltd.
 
  •  developers of small unmanned ground vehicles such as Foster-Miller, Inc. — a wholly owned subsidiary of QinetiQ North America, Inc., Allen-Vanguard Corporation, and Remotec — a division of Northrop Grumman Corporation; and
 
  •  established government contractors working on unmanned systems such as Lockheed Martin Corporation, BAE Systems, Inc. and General Dynamics Corporation.
 
While we believe many of our customers purchase our Roomba floor vacuuming robots and Scooba floor washing robots as a supplement to, rather than a replacement for, their traditional vacuum cleaners and wet floor cleaning methods, we do compete in some cases with providers of traditional cleaning products.
 
We believe that the principal competitive factors in the market for robots include product features, performance for the intended mission, cost of purchase, total cost of system operation, including maintenance and support, ease of use, integration with existing equipment, quality, reliability, customer support, brand and reputation.
 
Our ability to remain competitive will depend to a great extent upon our ongoing performance in the areas of product development and customer support. We cannot assure you that our products will continue to compete


15


Table of Contents

favorably or that we will be successful in the face of increasing competition from new products and enhancements introduced by existing competitors or new companies entering the markets in which we provide products.
 
Intellectual Property
 
We believe that our continued success depends in large part on our proprietary technology, the intellectual skills of our employees and the ability of our employees to continue to innovate. We rely on a combination of patent, copyright, trademark and trade secret laws, as well as confidentiality agreements, to establish and protect our proprietary rights.
 
As of December 29, 2007, we held 33 U.S. patents and more than 100 pending U.S. patent applications. Also, we held 11 foreign patents, additional design registrations, and more than 40 pending foreign applications. Our first U.S. patent is set to expire on April 19, 2008. We do not expect the expiration of this patent to adversely affect our intellectual property position. Our other U.S. patents will begin to expire in 2019. We will continue to file and prosecute patent (or design registration, as applicable) applications when and where appropriate to attempt to protect our rights in our proprietary technologies. We also encourage our employees to continue to invent and develop new technologies so as to maintain our competitiveness in the marketplace. It is possible that our current patents, or patents which we may later acquire, may be successfully challenged or invalidated in whole or in part. It is also possible that we may not obtain issued patents for our pending patent applications or other inventions we seek to protect. In that regard, we sometimes permit certain intellectual property to lapse or go abandoned under appropriate circumstances and due to uncertainties inherent in prosecuting patent applications, sometimes patent applications are rejected and we subsequently abandon them. It is also possible that we may not develop proprietary products or technologies in the future that are patentable, or that any patent issued to us may not provide us with any competitive advantages, or that the patents of others will harm or altogether preclude our ability to do business.
 
Our registered U.S. trademarks include iRobot, Roomba, Scooba, iRobot Dirt Dog, Create, PackBot, Home Base and Virtual Wall. Our marks, iRobot, Roomba, Scooba, and certain other trademarks, have also been registered in selected foreign countries.
 
Our means of protecting our proprietary rights may not be adequate and our competitors may independently develop technology that is similar to ours. Legal protections afford only limited protection for our technology. The laws of many countries do not protect our proprietary rights to as great an extent as do the laws of the United States. Despite our efforts to protect our proprietary rights, unauthorized parties have in the past attempted, and may in the future attempt, to copy aspects of our products or to obtain and use information that we regard as proprietary. Third parties may also design around our proprietary rights, which may render our protected products less valuable, if the design around is favorably received in the marketplace. In addition, if any of our products or the technology underlying our products is covered by third-party patents or other intellectual property rights, we could be subject to various legal actions. We cannot assure you that our products do not infringe patents held by others or that they will not in the future. We have received in the past communications from third parties relating to technologies used in our Roomba floor vacuuming robots that have alleged infringement of patents or violation of other intellectual property rights. In response to these communications, we have contacted these third parties to convey our good faith belief that we do not infringe the patents in question or otherwise violate those parties’ rights. Although there have been no additional actions or communications with respect to these allegations, we cannot assure you that we will not receive further correspondence from these parties, or not be subject to additional allegations of infringement from others. Litigation may be necessary to enforce our intellectual property rights, to protect our trade secrets, to determine the validity and scope of the proprietary rights of others, or to defend against claims of infringement or invalidity, misappropriation, or other claims. Any such litigation could result in substantial costs and diversion of our resources. Moreover, any settlement of or adverse judgment resulting from such litigation could require us to obtain a license to continue to use the technology that is the subject of the claim, or otherwise restrict or prohibit our use of the technology. Any required licenses may not be available to us on acceptable terms, if at all. If we attempt to design around the technology at issue or to find another provider of suitable alternative technology to permit us to continue offering applicable software or product solutions, our continued supply of software or product solutions could be disrupted or our introduction of new or enhanced software or products could be significantly delayed.


16


Table of Contents

Regulations
 
We are subject to various government regulations, including various U.S. federal government regulations as a contractor and subcontractor to the U.S. federal government. Among the most significant U.S. federal government regulations affecting our business are:
 
  •  the Federal Acquisition Regulations and supplemental agency regulations, which comprehensively regulate the formation and administration of, and performance under government contracts;
 
  •  the Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
 
  •  the Cost Accounting Standards, which impose accounting requirements that govern our right to reimbursement under cost-based government contracts;
 
  •  the Foreign Corrupt Practices Act, which prohibits U.S. companies from providing anything of value to a foreign official to help obtain, retain or direct business, or obtain any unfair advantages;
 
  •  the False Claims Act and the False Statements Act, which, respectively, impose penalties for payments made on the basis of false facts provided to the government, and impose penalties on the basis of false statements, even if they do not result in a payment; and
 
  •  laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the exportation of certain products and technical data.
 
We also need special security clearances to continue working on and advancing certain of our projects with the U.S. federal government. Classified programs generally will require that we comply with various Executive Orders, federal laws and regulations and customer security requirements that may include restrictions on how we develop, store, protect and share information, and may require our employees to obtain government clearances.
 
The nature of the work we do for the federal government may also limit the parties who may invest in or acquire us. Export laws may keep us from providing potential foreign acquirers with a review of the technical data they would be acquiring. In addition, there are special requirements for foreign parties who wish to buy or acquire control or influence over companies that control technology or produce goods in the security interests of the United States. There may need to be a review under the Exon-Florio provisions of the Defense Production Act. Finally, the government may require a prospective foreign owner to establish intermediaries to actually run that part of the company that does classified work, and establishing a subsidiary and its separate operation may make such an acquisition less appealing to such potential acquirers.
 
In addition, the export from the United States of many of our products may require the issuance of a license by the U.S. Department of Commerce under the Export Administration Act, as amended, and its implementing Regulations as kept in force by the International Emergency Economic Powers Act of 1977, as amended. Some of our products may require the issuance of a license by the U.S. Department of State under the Arms Export Control Act and its implementing Regulations, which licenses are generally harder to obtain and take longer to obtain than do Export Administration Act licenses.
 
Government Product Backlog
 
Our government product backlog consists of written orders or contracts to purchase our products received from our government customers. Total backlog of product sales to government customers as of December 29, 2007 and December 30, 2006 amounted to approximately $26.1 million and $7.5 million, respectively. We do not have long-term contracts with non-government customers, and purchases from our non-government customers generally occur on an order-by-order basis, which can be terminated or modified at any time by these customers. In addition, our funded research and development contracts may be cancelled or delayed at any time without significant, if any, penalty. As a result, we believe that backlog with respect to product sales to our non-government customers and funded research and development is not meaningful. There can be no assurance that any of our backlog will result in revenue.


17


Table of Contents

Employees
 
As of December 29, 2007, we had 423 full-time employees located in the United States and abroad, of whom 202 are in research and development, 95 are in operations, 36 are in sales and marketing and 90 are in general and administration. We believe that we have a good relationship with our employees.
 
Available Information
 
We were incorporated in California in August 1990 under the name IS Robotics, Inc. and reincorporated as IS Robotics Corporation in Massachusetts in June 1994. We reincorporated in Delaware as iRobot Corporation in December 2000. We conduct operations and maintain a number of subsidiaries in the United States and abroad, including operations in Hong Kong, the United Kingdom, China and India. We also maintain iRobot Securities Corporation, a Massachusetts securities corporation, to invest our cash balances on a short-term basis. Our website address is www.irobot.com. Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge through the investor relations page of our internet website as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission.


18


Table of Contents

ITEM 1A.   RISK FACTORS
 
We operate in a rapidly changing environment that involves a number of risks, some of which are beyond our control. This discussion highlights some of the risks which may affect future operating results. These are the risks and uncertainties we believe are most important for you to consider. Additional risks and uncertainties not presently known to us, which we currently deem immaterial or which are similar to those faced by other companies in our industry or business in general, may also impair our business operations. If any of the following risks or uncertainties actually occurs, our business, financial condition and operating results would likely suffer.
 
Risks Related to Our Business
 
We operate in an emerging market, which makes it difficult to evaluate our business and future prospects.
 
Robots represent a new and emerging market. Accordingly, our business and future prospects are difficult to evaluate. We cannot accurately predict the extent to which demand for consumer robots will increase, if at all. Moreover, there are only a limited number of major programs under which the U.S. federal government is currently funding the development or purchase of military robots. You should consider the challenges, risks and uncertainties frequently encountered by companies using new and unproven business models in rapidly evolving markets. These challenges include our ability to:
 
  •  generate sufficient revenue and gross profit to maintain profitability;
 
  •  acquire and maintain market share in our consumer and military markets;
 
  •  manage growth in our operations;
 
  •  attract and retain customers of our consumer robots;
 
  •  develop and renew government contracts for our military robots;
 
  •  attract and retain additional engineers and other highly-qualified personnel;
 
  •  adapt to new or changing policies and spending priorities of governments and government agencies; and
 
  •  access additional capital when required and on reasonable terms.
 
If we fail to successfully address these and other challenges, risks and uncertainties, our business, results of operations and financial condition would be materially harmed.
 
Our financial results often vary significantly from quarter-to-quarter due to a number of factors,which may lead to volatility in our stock price.
 
Our quarterly revenue and other operating results have varied in the past and are likely to continue to vary significantly from quarter-to-quarter. For instance, our consumer product revenue is significantly seasonal. For the fiscal years ended December 29, 2007 and December 30, 2006, we generated 74.6% and 64.5%, respectively, of our revenue from sales of consumer products in the second half of the year. This variability may lead to volatility in our stock price as equity research analysts and investors respond to these quarterly fluctuations. These fluctuations will be due to numerous factors including:
 
  •  seasonality in the sales of our consumer products;
 
  •  the size and timing of orders from retail stores for our home care robots;
 
  •  the size and timing of orders from military and other government agencies;
 
  •  the mix of products that we sell in the period;
 
  •  disruption of supply of our products from our manufacturers;
 
  •  the inability to attract and retain qualified, revenue-generating personnel;
 
  •  unanticipated costs incurred in the introduction of new products;


19


Table of Contents

 
  •  costs of labor and raw materials;
 
  •  changes in our rate of returns for our consumer products;
 
  •  our ability to introduce new products and enhancements to our existing products on a timely basis;
 
  •  price reductions;
 
  •  warranty costs associated with our consumer products;
 
  •  the amount of government funding and the political, budgetary and purchasing constraints of our government agency customers; and
 
  •  cancellations, delays or contract amendments by government agency customers.
 
Predicting revenue for any particular quarter and from sales of our consumer products includes many challenges. Chain stores and other national retailers typically place orders for the holiday season in the third quarter and early in the fourth quarter. The timing of these holiday season shipments could materially affect our third or fourth quarter results in any fiscal year. Because of quarterly fluctuations, we believe that quarter-to-quarter comparisons of our operating results are not necessarily meaningful. Moreover, our operating results may not meet expectations of equity research analysts or investors. If this occurs, the trading price of our common stock could fall substantially either suddenly or over time.
 
Our future profitability may fluctuate, and we have a limited operating history on which you can base your evaluation of our business.
 
As of December 29, 2007, we had an accumulated deficit of $11.6 million. Over the past four years, our accumulated deficit has decreased by $15.5 million due to annual operating profitability. Because we operate in a rapidly evolving industry, there are challenges to predicting our future operating results, and we cannot be certain that our revenues will grow at rates that will allow us to maintain profitability during every fiscal quarter, or even every fiscal year. In addition, we only have limited operating history on which you can base your evaluation of our business.
 
A majority of our business currently depends on our consumer robots, and our sales growth and operating results would be negatively impacted if we are unable to enhance our current consumer robots or develop new consumer robots at competitive prices or in a timely manner.
 
For the years ended December 29, 2007 and December 30, 2006, we derived 58.0% and 59.5% of our total revenue from our consumer robots, respectively. For the foreseeable future, we expect that a significant portion of our revenue will continue to be derived from sales of consumer robots in general and home floor care products in particular. Accordingly, our future success depends upon our ability to further penetrate the consumer home care market, to enhance our current consumer products and develop and introduce new consumer products offering enhanced performance and functionality at competitive prices. The development and application of new technologies involve time, substantial costs and risks. Our results in 2008 will depend in part on the success of product lines introduced during 2007, such as the Roomba 500 series robot, Verro pool cleaning robot and the Looj gutter cleaning robot, and there can be no assurance that these new products will achieve or maintain any level of retail or consumer acceptance. Our inability to achieve significant sales of our newly introduced robots, or to enhance, develop and introduce other products in a timely manner, or at all, would materially harm our sales growth and operating results.
 
We depend on the U.S. federal government for a significant portion of our revenue, and any reduction in the amount of business that we do with the U.S. federal government would negatively impact our operating results and financial condition.
 
For the years ended December 29, 2007 and December 30, 2006, we derived 34.9% and 34.4% of our total revenue, respectively, directly or indirectly, from the U.S. federal government and its agencies. Any reduction in the amount of revenue that we derive from a limited number of U.S. federal government agencies without an offsetting increase in new sales to other customers would have a material adverse effect on our operating results.


20


Table of Contents

Our participation in specific major U.S. federal government programs is critical to both the development and sale of our military robots. For example, in the years ended December 29, 2007 and December 30, 2006, 45.0% and 59.8% of our contract revenue was derived from our participation in the U.S. Army’s Future Combat Systems program, respectively. Future sales of our PackBot robots will depend largely on our ability to secure contracts with the U.S. military under its robot programs. We expect that there will continue to be only a limited number of major programs under which U.S. federal government agencies will seek to fund the development of, or purchase, robots. Our business will, therefore, suffer if we are not awarded, either directly or indirectly through third-party contractors, government contracts for robots that we are qualified to develop or build. In addition, if the U.S. federal government or government agencies terminate or reduce the related prime contract under which we serve as a subcontractor, revenues that we derive under that contract could be lost, which would negatively impact our business and financial results. Moreover, it is difficult to predict the timing of the award of government contracts and our revenue could fluctuate significantly based on the timing of any such awards.
 
Even if we continue to receive funding for research and development under these contracts, there can be no assurance that we will successfully complete the development of robots pursuant to these contracts or that, if successfully developed, the U.S. federal government or any other customer will purchase these robots from us. The U.S. federal government has the right when it contracts to use the technology developed by us to have robots supplied by third parties. Any failure by us to complete the development of these robots, or to achieve successful sales of these robots, would harm our business and results of operations.
 
Our contracts with the U.S. federal government contain certain provisions that may be unfavorable to us and subject us to government audits, which could materially harm our business and results of operations.
 
Our contracts and subcontracts with the U.S. federal government subject us to certain risks and give the U.S. federal government rights and remedies not typically found in commercial contracts, including rights that allow the U.S. federal government to:
 
  •  terminate contracts for convenience, in whole or in part, at any time and for any reason;
 
  •  reduce or modify contracts or subcontracts if its requirements or budgetary constraints change;
 
  •  cancel multi-year contracts and related orders if funds for contract performance for any subsequent year become unavailable;
 
  •  exercise production priorities, which allow it to require that we accept government purchase orders or produce products under its contracts before we produce products under other contracts, which may displace or delay production of more profitable orders;
 
  •  claim certain rights in products provided by us; and
 
  •  control or prohibit the export of certain of our products.
 
Several of our prime contracts with the U.S. federal government do not contain a limitation of liability provision, creating a risk of responsibility for direct and consequential damages. Several subcontracts with prime contractors hold the prime contractor harmless against liability that stems from our work and do not contain a limitation of liability. These provisions could cause substantial liability for us, especially given the use to which our products may be put.
 
In addition, we are subject to audits by the U.S. federal government as part of routine audits of government contracts. As part of an audit, these agencies may review our performance on contracts, cost structures and compliance with applicable laws, regulations and standards. If any of our costs are found to be allocated improperly to a specific contract, the costs may not be reimbursed and any costs already reimbursed for such contract may have to be refunded. Accordingly, an audit could result in a material adjustment to our revenue and results of operations. Moreover, if an audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or debarment from doing business with the government.


21


Table of Contents

If any of the foregoing were to occur, or if the U.S. federal government otherwise ceased doing business with us or decreased the amount of business with us, our business and operating results could be materially harmed and the value of your investment in our common stock could be impaired.
 
Some of our contracts with the U.S. federal government allow it to use inventions developed under the contracts and to disclose technical data to third parties, which could harm our ability to compete.
 
Some of our contracts allow the U.S. federal government rights to use, or have others use, patented inventions developed under those contracts on behalf of the government. Some of the contracts allow the federal government to disclose technical data without constraining the recipient in how that data is used. The ability of third parties to use patents and technical data for government purposes creates the possibility that the government could attempt to establish additional sources for the products we provide that stem from these contracts. It may also allow the government the ability to negotiate with us to reduce our prices for products we provide to it. The potential that the government may release some of the technical data without constraint creates the possibility that third parties may be able to use this data to compete with us in the commercial sector.
 
Government contracts are subject to a competitive bidding process that can consume significant resources without generating any revenue.
 
Government contracts are frequently awarded only after formal competitive bidding processes, which are protracted. In many cases, unsuccessful bidders for government agency contracts are provided the opportunity to protest certain contract awards through various agency, administrative and judicial channels. If any of the government contracts awarded to us are protested, we may be required to expend substantial time, effort and financial resources without realizing any revenue with respect to the potential contract. The protest process may substantially delay our contract performance, distract management and result in cancellation of the contract award entirely.
 
We depend on single source manufacturers, and our reputation and results of operations would be harmed if these manufacturers fail to meet our requirements.
 
We currently depend on one contract manufacturers, Jetta Company Limited, to manufacture our Roomba 400 series and Scooba series of home robot products at a single plant in China, and one contract manufacturer, Kin Yat Industrial Co Limited, to manufacture our Roomba 500 series of home robot products at plants in China. Moreover, we rely on one contract manufacturer, Gem City Engineering Corporation, to manufacture our military products at a single plant in the United States. We do not have a long-term contract with Jetta Company Limited and the manufacture of our consumer products is provided on a purchase-order basis. These manufacturers supply substantially all of the raw materials and provide all facilities and labor required to manufacture our products. If these companies were to terminate their arrangements with us or fail to provide the required capacity and quality on a timely basis, we would be unable to manufacture our products until replacement contract manufacturing services could be obtained. To qualify a new contract manufacturer, familiarize it with our products, quality standards and other requirements, and commence volume production is a costly and time-consuming process. We cannot assure you that we would be able to establish alternative manufacturing relationships on acceptable terms.
 
Our reliance on these contract manufacturers involves certain risks, including the following:
 
  •  lack of direct control over production capacity and delivery schedules;
 
  •  lack of direct control over quality assurance, manufacturing yields and production costs;
 
  •  lack of enforceable contractual provisions over the production and costs of consumer products;
 
  •  risk of loss of inventory while in transit from China; and
 
  •  risks associated with international commerce with China, including unexpected changes in legal and regulatory requirements, changes in tariffs and trade policies, risks associated with the protection of intellectual property and political and economic instability.


22


Table of Contents

 
Any interruption in the manufacture of our products would be likely to result in delays in shipment, lost sales and revenue and damage to our reputation in the market, all of which would harm our business and results of operations. In addition, while our contract obligations with our contract manufacturers in China are typically denominated in U.S. dollars, changes in currency exchange rates could impact our suppliers and increase our prices.
 
Any efforts to expand our product offerings beyond our current markets may not succeed, which could negatively impact our operating results.
 
We have focused on selling our robots in the home floor care and military markets. We plan to expand into other markets. For example, we have devoted significant time and incurred expenses in connection with the development of our Looj gutter cleaning robot and ConnectR virtual visiting robot. Efforts to expand our product offerings beyond the two markets that we currently serve, however, may divert management resources from existing operations and require us to commit significant financial resources to an unproven business, either of which could significantly impair our operating results. Moreover, efforts to expand beyond our existing markets may never result in new products that achieve market acceptance, create additional revenue or become profitable.
 
If we are unable to implement appropriate controls and procedures to manage our growth, we may not be able to successfully implement our business plan.
 
Our headcount and operations are growing rapidly. This rapid growth has placed, and will continue to place, a significant strain on our management, administrative, operational and financial infrastructure. From December 30, 2006 to December 29, 2007, the number of our employees increased from 371 to 423. We anticipate further growth will be required to address increases in our product offerings and the geographic scope of our customer base. Our success will depend in part upon the ability of our senior management to manage this growth effectively. To do so, we must continue to hire, train, manage and integrate a significant number of qualified managers and employees. If our new employees perform poorly, or if we are unsuccessful in hiring, training, managing and integrating these new employees, or retaining these or our existing employees, our business may suffer.
 
In addition, we face risks associated with managing operations outside the United States, including operations in Hong Kong, China, India and the United Kingdom. To manage the expected continued growth of our headcount and operations, we will need to continue to improve our information technology infrastructure, operational, financial and management controls and reporting systems and procedures, and manage expanded operations in geographically distributed locations. Our expected additional headcount and capital investments will increase our costs, which will make it more difficult for us to offset any future revenue shortfalls by offsetting expense reductions in the short term. If we fail to successfully manage our growth, we will be unable to successfully execute our business plan, which could have a negative impact on our business, financial condition or results of operations.
 
If the consumer robot market does not experience significant growth or if our products do not achieve broad acceptance, we will not be able to achieve our anticipated level of growth.
 
We derive a substantial portion of our revenue from sales of our consumer robots, including our home care robots. For the years ended December 29, 2007 and December 30, 2006, consumer robots accounted for 58.0% and 59.5%, respectively, of our total revenue. We face challenges in predicting the future growth rate or the size of the consumer robot market in general or the home care robot market in particular. Demand for home care robots may not increase, or may decrease, either generally or in specific geographic markets, for particular types of robots or during particular time periods. The expansion of the home robot market and the market for our products depends on a number of factors, such as:
 
  •  the cost, performance and reliability of our products and products offered by our competitors;
 
  •  public perceptions regarding the effectiveness and value of robots;
 
  •  customer satisfaction with robots; and
 
  •  marketing efforts and publicity regarding robots.


23


Table of Contents

 
Even if consumer robots gain wide market acceptance, our robots may not adequately address market requirements and may not continue to gain market acceptance. If robots generally, or our robots specifically, do not gain wide market acceptance, we may not be able to achieve our anticipated level of growth, and our revenue and results of operations would suffer.
 
Our business and results of operations could be adversely affected by significant changes in the policies and spending priorities of governments and government agencies.
 
We derive a substantial portion of our revenue from sales to and contracts with U.S. federal, state and local governments and government agencies, and subcontracts under federal government prime contracts. For the years ended December 29, 2007 and December 30, 2006, U.S. federal government orders, contracts and subcontracts accounted for 34.9% and 34.4%, respectively, of our total revenue. We believe that the success and growth of our business will continue to depend on our successful procurement of government contracts either directly or through prime contractors. Many of our government customers are subject to stringent budgetary constraints and our continued performance under these contracts, or award of additional contracts from these agencies, could be jeopardized by spending reductions or budget cutbacks at these agencies. We cannot assure you that future levels of expenditures and authorizations will continue for governmental programs in which we provide products and services. A significant decline in government expenditures generally, or with respect to programs for which we provide products, could adversely affect our government product and funded research and development revenues and prospects, which would harm our business, financial condition and operating results. Our operating results may also be negatively impacted by other developments that affect these governments and government agencies generally, including:
 
  •  changes in government programs that are related to our products and services;
 
  •  adoption of new laws or regulations relating to government contracting or changes to existing laws or regulations;
 
  •  changes in political or public support for security and defense programs;
 
  •  delays or changes in the government appropriations process;
 
  •  uncertainties associated with the war on terror and other geo-political matters; and
 
  •  delays in the payment of our invoices by government payment offices.
 
These developments and other factors could cause governments and governmental agencies, or prime contractors that use us as a subcontractor, to reduce their purchases under existing contracts, to exercise their rights to terminate contracts at-will or to abstain from renewing contracts, any of which would cause our revenue to decline and could otherwise harm our business, financial condition and results of operations
 
We face intense competition from other providers of robots, including diversified technology providers, as well as competition from providers offering alternative products, which could negatively impact our results of operations and cause our market share to decline.
 
We believe that a number of companies have developed or are developing robots that will compete directly with our product offerings. Additionally, large and small companies, government-sponsored laboratories and universities are aggressively pursuing contracts for robot-focused research and development. Many current and potential competitors have substantially greater financial, marketing, research and manufacturing resources than we possess, and there can be no assurance that our current and future competitors will not be more successful than us. Moreover, while we believe many of our customers purchase our floor vacuuming robots as a supplement to, rather than a replacement for, their traditional vacuum cleaners. We also compete in some cases with providers of traditional vacuum cleaners. Our current principal competitors include:
 
  •  developers of robot floor care products such as AB Electrolux, Alfred Kärcher GmbH & Co., Samsung Electronics Co., Ltd., LG Electronics Inc., Infinuvo/Metapo, Inc, Matsutek Enterprises Co Ltd., Microrobot CO., Ltd., ACE ROBOT Co., Ltd. and Yujin Robotic Co. Ltd.


24


Table of Contents

 
  •  developers of small unmanned ground vehicles such as Foster-Miller, Inc. — a wholly owned subsidiary of QinetiQ North America, Inc., Allen-Vanguard Corporation, and Remotec — a division of Northrop Grumman Corporation; and
 
  •  established government contractors working on unmanned systems such as Lockheed Martin Corporation, BAE Systems, Inc. and General Dynamics Corporation.
 
In the event that the robot market expands, we expect that competition will intensify as additional competitors enter the market and current competitors expand their product lines. Companies competing with us may introduce products that are competitively priced, have increased performance or functionality, or incorporate technological advances that we have not yet developed or implemented. Increased competitive pressure could result in a loss of sales or market share or cause us to lower prices for our products, any of which would harm our business and operating results.
 
The market for robots is highly competitive, rapidly evolving and subject to changing technologies, shifting customer needs and expectations and the likely increased introduction of new products. Our ability to remain competitive will depend to a great extent upon our ongoing performance in the areas of product development and customer support. We cannot assure you that our products will continue to compete favorably or that we will be successful in the face of increasing competition from new products and enhancements introduced by existing competitors or new companies entering the markets in which we provide products. Our failure to compete successfully could cause our revenue and market share to decline, which would negatively impact our results of operations and financial condition.
 
Our business is significantly seasonal and, because many of our expenses are based on anticipated levels of annual revenue, our business and operating results will suffer if we do not achieve revenue consistent with our expectations.
 
Our home robots revenue is significantly seasonal. For the fiscal years ended December 29, 2007 and December 30, 2006, we generated 74.6% and 64.5%, respectively, of our revenue from sales of consumer products in the second half of the year. We expect a majority of such revenue will continue to be generated in the second half of the year for the foreseeable future. As a result of this seasonality, we believe that quarter-to-quarter comparisons of our operating results are not necessarily meaningful and that these comparisons cannot be relied upon as indicators of future performance.
 
We base our current and future expense levels on our internal operating plans and sales forecasts, including forecasts of holiday sales for our consumer products. A significant portion of our operating expenses, such as research and development expenses, certain marketing and promotional expenses and employee wages and salaries, do not vary directly with sales and are difficult to adjust in the short term. As a result, if sales for a quarter, particularly the final quarter of a fiscal year, are below our expectations, we might not be able to reduce operating expenses for that quarter and, therefore, we would not be able to reduce our operating expenses for the fiscal year. Accordingly, a sales shortfall during a fiscal quarter, and in particular the fourth quarter of a fiscal year, could have a disproportionate effect on our operating results for that quarter or that year. As a result of these factors, we may report operating results that do not meet the expectations of equity research analysts and investors. This could cause the trading price of our common stock to decline.
 
If critical components of our products that we currently purchase from a small number of suppliers become unavailable, we may incur delays in shipment, which could damage our business.
 
We and our outsourced manufacturers obtain hardware components, various subsystems, raw materials and batteries from a limited group of suppliers, some of which are sole suppliers. We do not have any long-term agreements with these suppliers obligating them to continue to sell components or products to us. Our reliance on these suppliers involves significant risks and uncertainties, including whether our suppliers will provide an adequate supply of required components of sufficient quality, will increase prices for the components and will perform their obligations on a timely basis. If we or our outsourced manufacturers are unable to obtain components from third-party suppliers in the quantities and of the quality that we require, on a timely basis and at acceptable prices, we may not be able to deliver our products on a timely or cost-effective basis to our customers, which could cause customers


25


Table of Contents

to terminate their contracts with us, reduce our gross profit and seriously harm our business, results of operations and financial condition. Moreover, if any of our suppliers become financially unstable, we may have to find new suppliers. It may take several months to locate alternative suppliers, if required, or to re-tool our products to accommodate components from different suppliers. We may experience significant delays in manufacturing and shipping our products to customers and incur additional development, manufacturing and other costs to establish alternative sources of supply if we lose any of these sources. We cannot predict if we will be able to obtain replacement components within the time frames that we require at an affordable cost, or at all. In particular, the prices of ABS plastic and nickel (for batteries) have fluctuated greatly and we cannot provide assurance that the prices of these components will not materially impact our results of operations.
 
Our products are complex and could have unknown defects or errors, which may give rise to claims against us, diminish our brand or divert our resources from other purposes.
 
Our robots rely on the interplay among behavior-based artificially intelligent systems, real-world dynamic sensors, user-friendly interfaces and tightly-integrated, electromechanical designs to accomplish their missions. Despite testing, our new or existing products have contained defects and errors and may in the future contain defects, errors or performance problems when first introduced, when new versions or enhancements are released, or even after these products have been used by our customers for a period of time. These problems could result in expensive and time-consuming design modifications or warranty charges, delays in the introduction of new products or enhancements, significant increases in our service and maintenance costs, exposure to liability for damages, damaged customer relationships and harm to our reputation, any of which could materially harm our results of operations and ability to achieve market acceptance. Our quality control procedures relating to the raw materials and components that it receives from third-party suppliers as well as our quality control procedures relating to its products after those products are designed, manufactured and packaged may not be sufficient. In addition, increased development and warranty costs, including the costs of any mandatory or voluntary recall or product upgrades, could be substantial and could reduce our operating margins. Moreover, because military robots are used in dangerous situations, the failure or malfunction of any of these robots, including our own, could significantly damage our reputation and support for robot solutions in general. The existence of any defects, errors, or failures in our products could also lead to product liability claims or lawsuits against us. A successful product liability claim could result in substantial cost, diminish our brand and divert management’s attention and resources, which could have a negative impact on our business, financial condition and results of operations.
 
The robot industry is and will likely continue to be characterized by rapid technological change,which will require us to develop new products and product enhancements, and could render our existing products obsolete.
 
Continuing technological changes in the robot industry and in the markets in which we sell our robots could undermine our competitive position or make our robots obsolete, either generally or for particular types of services. Our future success will depend upon our ability to develop and introduce a variety of new capabilities and enhancements to our existing product offerings, as well as introduce a variety of new product offerings, to address the changing needs of the markets in which we offer our robots. Delays in introducing new products and enhancements, the failure to choose correctly among technical alternatives or the failure to offer innovative products or enhancements at competitive prices may cause existing and potential customers to forego purchases of our products and purchase our competitors’ products. Moreover, the development of new products has required, and will require, that we expend significant financial and management resources. We have incurred, and expect to continue to incur, significant research and development expenses in connection with our efforts to expand our product offerings. If we are unable to devote adequate resources to develop new products or cannot otherwise successfully develop new products or enhancements that meet customer requirements on a timely basis, our products could lose market share, our revenue and profits could decline, or we could experience operating losses. Moreover, if we are unable to offset our product development costs through sales of existing or new products or product enhancements, our operating results and gross margins would be negatively impacted.


26


Table of Contents

If we are unable to attract and retain additional skilled personnel, we may be unable to grow our business.
 
To execute our growth plan, we must attract and retain additional, highly-qualified personnel. Competition for hiring these employees is intense, especially with regard to engineers with high levels of experience in designing, developing and integrating robots. Many of the companies with which we compete for hiring experienced employees have greater resources than we have. In addition, in making employment decisions, particularly in the high-technology industries, job candidates often consider the value of the equity they are to receive in connection with their employment. Therefore, significant volatility in the price of our stock may adversely affect our ability to attract or retain technical personnel. Furthermore, changes to accounting principles generally accepted in the United States relating to the expensing of stock options may discourage us from granting the sizes or types of stock options that job candidates may require to accept our offer of employment. If we fail to attract new technical personnel or fail to retain and motivate our current employees, our business and future growth prospects could be severely harmed.
 
We may be sued by third parties for alleged infringement of their proprietary rights, which could be costly, time-consuming and limit our ability to use certain technologies in the future.
 
If the size of our markets increases, we would be more likely to be subject to claims that our technologies infringe upon the intellectual property or other proprietary rights of third parties. In addition, the vendors from which we license technology used in our products could become subject to similar infringement claims. Our vendors, or we, may not be able to withstand third-party infringement claims. Any claims, with or without merit, could be time-consuming and expensive, and could divert our management’s attention away from the execution of our business plan. Moreover, any settlement or adverse judgment resulting from the claim could require us to pay substantial amounts or obtain a license to continue to use the technology that is the subject of the claim, or otherwise restrict or prohibit our use of the technology. There can be no assurance that we would be able to obtain a license from the third party asserting the claim on commercially reasonable terms, if at all, that we would be able to develop alternative technology on a timely basis, if at all, or that we would be able to obtain a license to use a suitable alternative technology to permit us to continue offering, and our customers to continue using, our affected product. In addition, we may be required to indemnify our retail and distribution partners for third-party intellectual property infringement claims, which would increase the cost to us of an adverse ruling in such a claim. An adverse determination could also prevent us from offering our products to others. Infringement claims asserted against us or our vendors may have a material adverse effect on our business, results of operations or financial condition.
 
If we fail to maintain or increase our consumer robot sales through our primary distribution channels, which include third-party retailers, our product sales and results of operations would be negatively impacted.
 
Chain stores and other national retailers are the primary distribution channels for our consumer robots and accounted for approximately 31.4% and 41.6% of our total revenue for the fiscal years ended December 29, 2007 and December 30, 2006, respectively. We do not have long-term contracts regarding purchase volumes with any of our distributors. As a result, purchases generally occur on an order-by-order basis, and the relationships, as well as particular orders, can generally be terminated or otherwise materially changed at any time by our distributors. A decision by a major retail distributor, whether motivated by competitive considerations, financial difficulties, economic conditions or otherwise, to decrease its purchases from us, to reduce the shelf space for our products or to change its manner of doing business with us could significantly damage our consumer product sales and negatively impact our business, financial condition and results of operations. In addition, during recent years, various retailers, including some of our distributors, have experienced significant changes and difficulties, including consolidation of ownership, increased centralization of purchasing decisions, restructurings, bankruptcies and liquidations. These and other financial problems of some of our retailers increase the risk of extending credit to these retailers. A significant adverse change in a retail distributor relationship with us or in a retail distributor’s financial position could cause us to limit or discontinue business with that distributor, require us to assume more credit risk relating to that distributor’s receivables or limit our ability to collect amounts related to previous purchases by that distributor,


27


Table of Contents

all of which could harm our business and financial condition. Disruption of the iRobot on-line store could also decrease our home care robot sales.
 
If we fail to enhance our brand, our ability to expand our customer base will be impaired and our operating results may suffer.
 
We believe that developing and maintaining awareness of the iRobot brand is critical to achieving widespread acceptance of our existing and future products and is an important element in attracting new customers. Furthermore, we expect the importance of global brand recognition to increase as competition develops. Successful promotion of our brand will depend largely on the effectiveness of our marketing efforts, including our mass media outreach, in-store training and presentations and public relations, and our ability to provide customers with reliable and technically sophisticated robots at competitive prices. If customers do not perceive our products to be of high quality, our brand and reputation could be harmed, which could adversely impact our financial results. In addition, brand promotion efforts may not yield significant revenue or increased revenue sufficient to offset the additional expenses incurred in building our brand. If we incur substantial expenses to promote and maintain our brand, we may fail to attract sufficient customers to realize a return on our brand-building efforts, and our business would suffer.
 
If our existing collaborations are unsuccessful or we fail to establish new collaborations, our ability to develop and commercialize additional products could be significantly harmed.
 
If we cannot maintain our existing collaborations or establish new collaborations, we may not be able to develop additional products. We anticipate that some of our future products will be developed and commercialized in collaboration with companies that have expertise outside the robot field. For example, we are currently collaborating with: The Boeing Company, acting by and through its Integrated Defense Systems Combat Systems business unit, on the development of the PackBot SUGV-Early; Deere & Company on the development of the R-Gator unmanned ground vehicle; TASER International, Inc. on the development of robots that can remotely engage, incapacitate and control dangerous suspects; and The Clorox Company on the cleaning solution used in our Scooba floor washing robot. Under these collaborations, we may be dependent on our collaborators to fund some portion of development of the product or to manufacture and market either the primary product that is developed pursuant to the collaboration or complementary products required in order to operate our products. In addition, we cannot assure you that we will be able to establish additional collaborative relationships on acceptable terms.
 
Our existing collaborations and any future collaborations with third parties may not be scientifically or commercially successful. Factors that may affect the success of our collaborations include the following:
 
  •  our collaborators may not devote the resources necessary or may otherwise be unable to complete development and commercialization of these potential products;
 
  •  our existing collaborations are and future collaborations may be subject to termination on short notice;
 
  •  our collaborators may be pursuing alternative technologies or developing alternative products, either on their own or in collaboration with others, that may be competitive with our products, which could affect our collaborators’ commitment to the collaboration with us;
 
  •  reductions in marketing or sales efforts or a discontinuation of marketing or sales of our products by our collaborators could reduce our revenue;
 
  •  our collaborators may terminate their collaborations with us, which could make it difficult for us to attract new collaborators or harm our reputation in the business and financial communities; and
 
  •  our collaborators may pursue higher priority programs or change the focus of their development programs, which would weaken our collaborators’ commitment to us.


28


Table of Contents

 
We depend on the experience and expertise of our senior management team and key technical employees, and the loss of any key employee may impair our ability to operate effectively.
 
Our success depends upon the continued services of our senior management team and key technical employees, such as our project management personnel and senior engineers. Moreover, we often must comply with provisions in government contracts that require employment of persons with specified levels of education and work experience. Each of our executive officers, key technical personnel and other employees could terminate his or her relationship with us at any time. The loss of any member of our senior management team might significantly delay or prevent the achievement of our business objectives and could materially harm our business and customer relationships. In addition, because of the highly technical nature of our robots, the loss of any significant number of our existing engineering and project management personnel could have a material adverse effect on our business and operating results.
 
We are subject to extensive U.S. federal government regulation, and our failure to comply with applicable regulations could subject us to penalties that may restrict our ability to conduct our business.
 
As a contractor and subcontractor to the U.S. federal government, we are subject to and must comply with various government regulations that impact our operating costs, profit margins and the internal organization and operation of our business. Among the most significant regulations affecting our business are:
 
  •  the Federal Acquisition Regulations and supplemental agency regulations, which comprehensively regulate the formation and administration of, and performance under government contracts;
 
  •  the Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
 
  •  the Cost Accounting Standards, which impose accounting requirements that govern our right to reimbursement under cost-based government contracts;
 
  •  the Foreign Corrupt Practices Act, which prohibits U.S. companies from providing anything of value to a foreign official to help obtain, retain or direct business, or obtain any unfair advantage;
 
  •  the False Claims Act and the False Statements Act, which, respectively, impose penalties for payments made on the basis of false facts provided to the government, and impose penalties on the basis of false statements, even if they do not result in a payment; and
 
  •  laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the exportation of certain products and technical data.
 
Also, we need special clearances to continue working on and advancing certain of our projects with the U.S. federal government. Obtaining and maintaining security clearances for employees involves a lengthy process, and it is difficult to identify, recruit and retain employees who already hold security clearances. If our employees are unable to obtain security clearances in a timely manner, or at all, or if our employees who hold security clearances are unable to maintain the clearances or terminate employment with us, then a customer requiring classified work could terminate the contract or decide not to renew it upon its expiration. In addition, we expect that many of the contracts on which we will bid will require us to demonstrate our ability to obtain facility security clearances and employ personnel with specified types of security clearances. To the extent we are not able to obtain facility security clearances or engage employees with the required security clearances for a particular contract, we may not be able to bid on or win new contracts, or effectively rebid on expiring contracts. For example, if we were to lose our security clearance, we would be unable to continue to participate in the U.S. Army’s Future Combat Systems program. Classified programs generally will require that we comply with various Executive Orders, federal laws and regulations and customer security requirements that may include restrictions on how we develop, store, protect and share information, and may require our employees to obtain government clearances.
 
Our failure to comply with applicable regulations, rules and approvals could result in the imposition of penalties, the loss of our government contracts or our suspension or debarment from contracting with the federal government generally, any of which would harm our business, financial condition and results of operations.


29


Table of Contents

If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.
 
Our success depends on our ability to protect our intellectual property and other proprietary rights. We rely primarily on patents, trademarks, copyrights, trade secrets and unfair competition laws, as well as license agreements and other contractual provisions, to protect our intellectual property and other proprietary rights. Significant technology used in our products, however, is not the subject of any patent protection, and we may be unable to obtain patent protection on such technology in the future. Moreover, existing U.S. legal standards relating to the validity, enforceability and scope of protection of intellectual property rights offer only limited protection, may not provide us with any competitive advantages, and may be challenged by third parties. In addition, the laws of countries other than the United States in which we market our products may afford little or no effective protection of our intellectual property. Accordingly, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our intellectual property or otherwise gaining access to our technology. Unauthorized third parties may try to copy or reverse engineer our products or portions of our products or otherwise obtain and use our intellectual property. Some of our contracts with the U.S. federal government allow the federal government to disclose technical data regarding the products developed on behalf of the government under the contract without constraining the recipient on how it is used. This ability of the government creates the potential that third parties may be able to use this data to compete with us in the commercial sector. If we fail to protect our intellectual property and other proprietary rights, our business, results of operations or financial condition could be materially harmed.
 
In addition, defending our intellectual property rights may entail significant expense. We believe that certain products in the marketplace may infringe our existing intellectual property rights. We have, from time to time, resorted to legal proceedings to protect our intellectual property and may continue to do so in the future. We may be required to expend significant resources to monitor and protect our intellectual property rights. Any of our intellectual property rights may be challenged by others or invalidated through administrative processes or litigation. If we resort to legal proceedings to enforce our intellectual property rights or to determine the validity and scope of the intellectual property or other proprietary rights of others, the proceedings could result in significant expense to us and divert the attention and efforts of our management and technical employees, even if we were to prevail.
 
Potential future acquisitions could be difficult to integrate, divert the attention of key personnel, disrupt our business, dilute stockholder value and impair our financial results.
 
As part of our business strategy, we intend to consider acquisitions of companies, technologies and products that we believe could accelerate our ability to compete in our core markets or allow us to enter new markets. Acquisitions involve numerous risks, any of which could harm our business, including:
 
  •  difficulties in integrating the operations, technologies, products, existing contracts, accounting and personnel of the target company and realizing the anticipated synergies of the combined businesses;
 
  •  difficulties in supporting and transitioning customers, if any, of the target company;
 
  •  diversion of financial and management resources from existing operations;
 
  •  the price we pay or other resources that we devote may exceed the value we realize, or the value we could have realized if we had allocated the purchase price or other resources to another opportunity;
 
  •  risks of entering new markets in which we have limited or no experience;
 
  •  potential loss of key employees, customers and strategic alliances from either our current business or the target company’s business;
 
  •  assumption of unanticipated problems or latent liabilities, such as problems with the quality of the target company’s products; and
 
  •  inability to generate sufficient revenue to offset acquisition costs.


30


Table of Contents

 
Acquisitions also frequently result in the recording of goodwill and other intangible assets which are subject to potential impairments in the future that could harm our financial results. In addition, if we finance acquisitions by issuing convertible debt or equity securities, our existing stockholders may be diluted, which could lower the market price of our common stock. As a result, if we fail to properly evaluate acquisitions or investments, we may not achieve the anticipated benefits of any such acquisitions, and we may incur costs in excess of what we anticipate. The failure to successfully evaluate and execute acquisitions or investments or otherwise adequately address these risks could materially harm our business and financial results.
 
We may not be able to obtain capital when desired on favorable terms, if at all, or without dilution to our stockholders.
 
We anticipate that our current cash, cash equivalents, cash provided by operating activities and funds available through our working capital line of credit, will be sufficient to meet our current and anticipated needs for general corporate purposes. We operate in an emerging market, however, which makes our prospects difficult to evaluate. It is possible that we may not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs. For example in fiscal 2007 we consumed $27 million of our cash and short term investments. If similar consumptions of cash were to continue, we may need additional financing to execute on our current or future business strategies, including to:
 
  •  hire additional engineers and other personnel;
 
  •  develop new, or enhance existing, robots and robot accessories;
 
  •  enhance our operating infrastructure;
 
  •  acquire complementary businesses or technologies; or
 
  •  otherwise respond to competitive pressures.
 
If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly-issued securities may have rights, preferences or privileges senior to those of existing stockholders. We cannot assure you that additional financing will be available on terms favorable to us, or at all. If adequate funds are not available or are not available on acceptable terms, if and when needed, our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our products, or otherwise respond to competitive pressures would be significantly limited.
 
Environmental laws and regulations and unforeseen costs could negatively impact our future earnings.
 
The manufacture and sale of our products in certain states and countries may subject us to environmental and other regulations. We also face increasing complexity in our product design as we adjust to new and upcoming requirements relating to our products, including the restrictions on lead and certain other substances in electronics that apply to specified electronics products put on the market in the European Union (Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive). Similar laws and regulations have been or may be enacted in other regions, including in the United States, Canada, Mexico, China, the United Kingdom, Germany and Japan. There is no assurance that such existing laws or future laws will not impair future earnings or results of operations.
 
Business disruptions resulting from international uncertainties could negatively impact our profitability.
 
We derive, and expect to continue to derive, a portion of our revenue from international sales in various European markets, Canada, Japan, Korea and Singapore. For the fiscal years ended December 29, 2007 and December 30, 2006, sales to non-U.S. customers accounted for 13.1% and 11.0% of total revenue, respectively. Our international revenue and operations are subject to a number of material risks, including, but not limited to:
 
  •  difficulties in staffing, managing and supporting operations in multiple countries;


31


Table of Contents

 
  •  difficulties in enforcing agreements and collecting receivables through foreign legal systems and other relevant legal issues;
 
  •  fewer legal protections for intellectual property;
 
  •  foreign and U.S. taxation issues and international trade barriers;
 
  •  difficulties in obtaining any necessary governmental authorizations for the export of our products to certain foreign jurisdictions;
 
  •  potential fluctuations in foreign economies;
 
  •  government currency control and restrictions on repatriation of earnings;
 
  •  fluctuations in the value of foreign currencies and interest rates;
 
  •  general economic and political conditions in the markets in which we operate;
 
  •  domestic and international economic or political changes, hostilities and other disruptions in regions where we currently operate or may operate in the future; and
 
  •  different and changing legal and regulatory requirements in the jurisdictions in which we currently operate or may operate in the future.
 
Negative developments in any of these areas in one or more countries could result in a reduction in demand for our products, the cancellation or delay of orders already placed, threats to our intellectual property, difficulty in collecting receivables, and a higher cost of doing business, any of which could negatively impact our business, financial condition or results of operations. Moreover, our sales, including sales to customers outside the United States, are primarily denominated in U.S. dollars, and downward fluctuations in the value of foreign currencies relative to the U.S. dollar may make our products more expensive than other products, which could harm our business.
 
If we are unable to continue to obtain U.S. federal government authorization regarding the export of our products, or if current or future export laws limit or otherwise restrict our business, we could be prohibited from shipping our products to certain countries, which would harm our ability to generate revenue.
 
We must comply with U.S. laws regulating the export of our products. In addition, we are required to obtain a license from the U.S. federal government to export our PackBot line of tactical military robots. We cannot be sure of our ability to obtain any licenses required to export our products or to receive authorization from the U.S. federal government for international sales or domestic sales to foreign persons. Moreover, the export regimes and the governing policies applicable to our business are subject to change. We cannot assure you of the extent that such export authorizations will be available to us, if at all, in the future. In some cases where we act as a subcontractor, we rely upon the compliance activities of our prime contractors, and we cannot assure you that they have taken or will take all measures necessary to comply with applicable export laws. If we or our prime contractor partners cannot obtain required government approvals under applicable regulations in a timely manner or at all, we would be delayed or prevented from selling our products in international jurisdictions, which could materially harm our business, operating results and ability to generate revenue.
 
We invest in auction rate securities that are subject to market risk and the recent problems in the financial markets could adversely affect the value and liquidity of our assets.
 
As of December 29, 2007, our $16.6 million of short-term investments consisted of auction rate securities. Recent uncertainties in the credit markets may result in certain of our investments in auction rate securities becoming subject to liquidity risk. Subsequent to December 29, 2007, the $16.6 million of auction rate securities held at December 29, 2007 have been liquidated.
 
As of February 21, 2008, we held $17.5 million of variable rate bonds or auction rate securities, all of which were purchased in January or February of 2008. A substantial majority of the underlying assets of these auction rate securities are student loans which are backed by the federal government under the Federal Family Education Loan


32


Table of Contents

Program. On February 19, 2008 one auction failed for $2.5 million of our auction rate securities and there is no assurance that auctions on the remaining auction rate securities in our investment portfolio will succeed in the future. As a result, our ability to liquidate our investments in the near term may be limited, and our ability to fully recover the carrying value of our investments may be limited or non-existent. An auction failure means that the parties wishing to sell securities could not carry out the transaction. All of our auction rate securities, including those subject to the prior failures, are currently rated AAA, the highest rating available by a rating agency. If the issuers are unable to successfully close future auctions or their credit ratings deteriorate, we may in the future be required to record an impairment charge on these investments. We believe we will be able to liquidate our investments without significant loss but the timing of such an outcome is uncertain. We currently believe these securities are not significantly impaired, primarily due to the government backing of the underlying securities. However, it could take until the final maturity of the underlying notes (up to 40 years) to realize our investments’ recorded value. Based on our expected operating cash flows, and our other potential sources of cash, including our available line of credit, we do not anticipate that the potential lack of liquidity on these investments in the near-term will affect our ability to execute our current business plan.
 
State and local taxing authorities may determine that we are required to collect and remit sales tax in additional jurisdictions.
 
We collect and remit sales tax in states in which we have a physical presence or in which we believe nexus exists, which obligates us to collect sales tax. Other states may, from time to time, claim that we have state-related activities constituting a sufficient nexus to require such collection. Additionally, many other states seek to impose sales tax collection obligations on companies that sell goods to customers in their state, or directly to the state and its political subdivisions, even without a physical presence. A successful assertion by one or more states that we should collect sales tax on the sale of merchandise could result in substantial tax liabilities related to past sales.
 
Currently, U.S. Supreme Court decisions restrict the imposition of obligations to collect state and local sales and use taxes with respect to sales made over the Internet. However, a number of states, as well as the U.S. Congress, have been considering initiatives that could limit or supersede the Supreme Court’s position regarding sales and use taxes on Internet sales. If any of these initiatives were successful, we could be required to collect sales and use taxes in additional states, which could result in substantial tax liabilities and penalties in connection with past sales.
 
Our income tax provision and other tax liabilities may be insufficient if taxing authorities are successful in asserting tax positions that are contrary to our position. Additionally, there is no guarantee that we will realize our deferred tax assets.
 
From time to time, we are audited by various federal, state and local authorities regarding income tax matters. Significant judgment is required to determine our provision for income taxes and our liabilities for federal, state, local and other taxes. Although we believe our approach to determining the appropriate tax treatment is supportable and in accordance with Statement of Financial Accounting Standards No. 109, “Accounting for Income Taxes,” and FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes,” it is possible that the final tax authority will take a tax position that is materially different than that which is reflected in our income tax provision. Such differences could have a material adverse effect on our income tax provision or benefit, in the reporting period in which such determination is made and, consequently, on our results of operations, financial position and/or cash flows for such period.
 
At December 29, 2007 we had gross deferred tax assets of $12.9 million and a valuation allowance of $2.7 million resulting in net deferred tax asset of $10.2 million. Future adjustments, either increases or decreases, to our deferred tax asset valuation allowance will be determined based upon changes in the expected realization of our net deferred tax assets. The realization of our deferred tax assets ultimately depends on the existence of sufficient taxable income in either the carryback or carryforward periods under the tax law. Due to significant estimates utilized in establishing the valuation allowance and the potential for changes in facts and circumstances, it is possible that we will be required to record adjustments to the valuation allowance in future reporting periods. Our results of operations would be impacted negatively if we determine that increases to our deferred tax asset valuation allowance are required in a future reporting period.


33


Table of Contents

Our directors and management will exercise significant control over our company, which will limit your ability to influence corporate matters.
 
As of December 29, 2007, our directors and executive officers and their affiliates collectively beneficially owned approximately 27.6% of our outstanding common stock. As a result, these stockholders, if they act together, will be able to influence our management and affairs and all matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. This concentration of ownership may have the effect of delaying or preventing a change in control of our company and might negatively affect the market price of our common stock.
 
Provisions in our certificate of incorporation and by-laws, our shareholder rights agreement or Delaware law might discourage, delay or prevent a change of control of our company or changes in our management and, therefore, depress the trading price of our common stock.
 
Provisions of our certificate of incorporation and by-laws and Delaware law may discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable, including transactions in which you might otherwise receive a premium for your shares of our common stock. These provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. These provisions include:
 
  •  limitations on the removal of directors;
 
  •  a classified board of directors so that not all members of our board are elected at one time;
 
  •  advance notice requirements for stockholder proposals and nominations;
 
  •  the inability of stockholders to act by written consent or to call special meetings;
 
  •  the ability of our board of directors to make, alter or repeal our by-laws; and
 
  •  the ability of our board of directors to designate the terms of and issue new series of preferred stock without stockholder approval.
 
The affirmative vote of the holders of at least 75% of our shares of capital stock entitled to vote is necessary to amend or repeal the above provisions of our certificate of incorporation. In addition, absent approval of our board of directors, our by-laws may only be amended or repealed by the affirmative vote of the holders of at least 75% of our shares of capital stock entitled to vote.
 
We have also adopted a shareholder rights agreement that entitles our stockholders to acquire shares of our common stock at a price equal to 50% of the then-current market value in limited circumstances when a third party acquires or announces its intention to acquire 15% or more of our outstanding common stock.
 
In addition, Section 203 of the Delaware General Corporation Law prohibits a publicly-held Delaware corporation from engaging in a business combination with an interested stockholder, generally a person which together with its affiliates owns, or within the last three years has owned, 15% of our voting stock, for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner.
 
The existence of the foregoing provisions and anti-takeover measures could limit the price that investors might be willing to pay in the future for shares of our common stock. They could also deter potential acquirers of our company, thereby reducing the likelihood that you could receive a premium for your common stock in an acquisition.
 
ITEM 1B.   UNRESOLVED STAFF COMMENTS
 
None.
 
ITEM 2.   PROPERTIES
 
Our corporate headquarters are located in Burlington, Massachusetts, where we lease approximately 82,000 square feet. Approximately 24,000 square feet of this lease expires on April 30, 2008 and the remainder


34


Table of Contents

expires on December 31, 2008. We lease 6,150 square feet of space at an adjacent facility in Burlington for our prototype work on unmanned ground vehicles. We also lease 7,550 square feet in Mysore, India and we lease smaller facilities in Hong Kong; Shenzhen, China; San Luis Obispo, California; and Crystal City, Virginia. We do not own any real property. We believe that our leased facilities and additional or alternative space available to us will be adequate to meet our needs for the foreseeable future.
 
On February 22, 2007, we entered into an agreement to lease approximately 157,000 square feet for our new corporate headquarters in Bedford, Massachusetts to which we expect to relocate on or about May 1, 2008.
 
ITEM 3.   LEGAL PROCEEDINGS
 
From time to time in the ordinary course of our business, we may be involved in disputes or litigation relating to claims arising out of our operations. The outcome of litigation cannot be predicted with certainty and some lawsuits, claims or proceedings may be disposed of unfavorably to us, which could materially and adversely affect our financial condition or results of operations.
 
On August 17, 2007, we filed a lawsuit in Massachusetts Superior Court against Robotic FX, Inc. and Jameel Ahed alleging, among other things, misappropriation of trade secrets and breach of contract, and seeking both injunctive and monetary relief. The case was subsequently removed to the United States District Court for the District of Massachusetts. On November 2, 2007, the court issued a preliminary injunction, and on December 21, 2007 issued a permanent injunction, against Robotic FX, Inc. and Mr. Ahed preventing the sale of products using certain of our trade secrets, including the Robotic FX Negotiator product.
 
In addition, on August 17, 2007, we filed a lawsuit in the United States District Court for the Northern District of Alabama against Robotic FX, Inc. alleging willful infringement of two patents owned by us, and seeking both injunctive and monetary relief. On December 21, 2007, the court entered a judgment that Robotic FX, Inc. knowingly infringed on both asserted patents.
 
In a related settlement, Robotic FX, Inc. will be dissolved and certain residual assets will be retained by us at our election. Mr. Ahed is prohibited from participating in competitive activities in the robotics industry for five years.
 
Our cumulative litigation and settlement-related expenditures associated with this dispute are expected to total approximately $3.0 million, including an obligation to make cash payments up to $0.7 million through 2012, contingent upon Mr. Ahed and Robotic FX, Inc. continuing to meet obligations pursuant to various agreements, including but not limited to certain non-competition provisions. These contingent payments will be expensed, when and if earned.
 
ITEM 4.   SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
 
None.


35


Table of Contents

 
PART II
 
ITEM 5.   MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
 
Our common stock is listed on the NASDAQ Global Market under the symbol “IRBT”. The following table sets forth, for the periods indicated, the high and low sales prices per share for our common stock as reported on the NASDAQ Global Market.
 
                 
    High     Low  
 
Fiscal 2006:
               
First quarter
  $ 37.90     $ 25.49  
Second quarter
  $ 29.30     $ 20.50  
Third quarter
  $ 25.50     $ 16.09  
Fourth quarter
  $ 24.98     $ 17.55  
Fiscal 2007:
               
First quarter
  $ 19.48     $ 12.76  
Second quarter
  $ 20.74     $ 13.12  
Third quarter
  $ 24.30     $ 16.20  
Fourth quarter
  $ 20.70     $ 14.51  
 
As of February 22, 2008, there were approximately 24,511,800 shares of our common stock outstanding held by approximately 143 stockholders of record and the last reported sale price of our common stock on the NASDAQ Global Market on February 22, 2008 was $18.03 per share.
 
Dividend Policy
 
We have never declared or paid any cash dividends on our capital stock. We currently expect to retain future earnings, if any, to finance the growth and development of our business and we do not anticipate paying any cash dividends in the foreseeable future.
 
Equity Compensation Plan Information
 
We maintain the following four equity compensation plans under which our equity securities are authorized for issuance to our employees and/or directors: Amended and Restated 1994 Stock Plan; Amended and Restated 2001 Special Stock Option Plan; Amended and Restated 2004 Stock Option and Incentive Plan; and 2005 Stock Option and Incentive Plan. Each of the foregoing compensation plans was approved by our stockholders. The following table represents information about these plans as of December 29, 2007:
 
                         
    (A)     (B)     (C)  
                Number of Securities
 
                Remaining Available for
 
    Number of Securities
          Future Issuance Under
 
    to be Issued Upon
    Weighted-Average
    Equity Compensation
 
    Exercise of
    Exercise Price of
    Plans (Excluding
 
    Outstanding Options,
    Outstanding Options,
    Securities Reflected in
 
Plan Category
  Warrants and Rights     Warrants and Rights     Column (A))  
 
Equity compensation plans approved by security holders
    3,246,088     $ 12.29       1,170,440  
Equity compensation plans not approved by security holders
                 
                         
Total
    3,246,088     $ 12.29       1,170,440  
                         
 
No further grants are being made under the Amended and Restated 1994 Stock Plan, the Amended and Restated 2001 Special Stock Option Plan and the Amended and Restated 2004 Stock Option and Incentive Plan.
 
Issuer Purchases of Equity Securities
 
During the fiscal quarter ended December 29, 2007, there were no repurchases made by us or on our behalf, or by any “affiliated purchasers,” of shares of our common stock.


36


Table of Contents

ITEM 6.   SELECTED FINANCIAL DATA
 
The selected historical financial data set forth below as of December 29, 2007 and December 30, 2006 and for the years ended December 29, 2007, December 30, 2006 and December 31, 2005 are derived from our financial statements, which have been audited by PricewaterhouseCoopers LLP, our independent registered public accounting firm, and which are included elsewhere in this Annual Report on Form 10-K. The selected historical financial data as of December 31, 2005, 2004 and 2003 and for the years ended December 31, 2004 and 2003 are derived from our financial statements which have been audited by PricewaterhouseCoopers LLP and which are not included elsewhere in this Annual Report.
 
The following selected consolidated financial data should be read in conjunction with our consolidated financial statements, the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this Annual Report on Form 10-K. The historical results are not necessarily indicative of the results to be expected for any future period.
 
                                         
    Year Ended  
    December 29,
    December 30,
    December 31,
    December 31,
    December 31,
 
    2007     2006     2005     2004     2003  
    (In thousands, except earnings per share amounts)  
 
Consolidated Statement of Operations:
                                       
Revenue
                                       
Product revenue(1)
  $ 227,457     $ 167,687     $ 124,616     $ 82,678     $ 46,655  
Contract revenue
    21,624       21,268       17,352       12,365       7,661  
                                         
Total revenue
    249,081       188,955       141,968       95,043       54,316  
Cost of Revenue
                                       
Cost of product revenue
    147,689       103,651       81,855       59,321       31,194  
Cost of contract revenue
    18,805       15,569       12,534       8,371       6,143  
                                         
Total cost of revenue
    166,494       119,220       94,389       67,692       37,337  
                                         
Gross Profit(1)
    82,587       69,735       47,579       27,351       16,979  
Operating Expenses
                                       
Research and development
    17,082       17,025       11,601       5,504       3,848  
Selling and marketing
    44,894       33,969       21,796       14,106       12,757  
General and administrative
    20,919       18,703       12,072       7,298       7,764  
Litigation and related expenses(2)
    2,341                          
                                         
Total operating expenses
    85,236       69,697       45,469       26,908       24,369  
                                         
Operating Income (Loss)
    (2,649 )     38       2,110       443       (7,390 )
Net Income (Loss)
  $ 9,060     $ 3,565     $ 2,610     $ 219     $ (7,411 )
                                         
Net Income (Loss) Attributable to Common Stockholders
  $ 9,060     $ 3,565     $ 1,553     $ 118     $ (7,411 )
                                         
Net Income (Loss) Per Common Share
                                       
Basic
  $ 0.37     $ 0.15     $ 0.13     $ 0.01     $ (0.79 )
Diluted
  $ 0.36     $ 0.14     $ 0.11     $ 0.01     $ (0.79 )
Shares Used in Per Common Share Calculations
                                       
Basic
    24,229       23,516       12,007       9,660       9,352  
Diluted
    25,501       25,601       14,331       19,183       9,352  


37


Table of Contents

 
(1) Beginning in the first quarter of 2004, we converted from recognizing revenue from U.S. consumer product sales on a “sell-through” basis (when retail stores sold our robots) to a “sell-in” basis (when our robots are shipped to retail stores). As a result of this conversion, our revenue and gross profit in the first quarter of 2004 included $5.7 million and $2.5 million, respectively, from robots shipped prior to 2004.
 
(2) Consists of costs for litigation relating to lawsuits filed against Robotic FX, Inc. and Jameel Ahed, as well as settlement costs related to ending the litigation. See Item 3 — Legal Proceedings included elsewhere in this Annual Report on Form 10-K for a more detailed discussion of this litigation.
 
                                         
    December 29,
    December 30,
    December 31,
    December 31,
    December 31,
 
    2007     2006     2005     2004     2003  
    (In thousands)  
 
Consolidated Balance Sheet Data:
                                       
Cash and cash equivalents
  $ 26,735     $ 5,583     $ 76,064     $ 19,441     $ 4,620  
Short term investments
    16,550       64,800                    
Total assets
    169,092       135,308       124,935       45,137       27,827  
Total liabilities
    58,865       40,389       37,379       31,921       25,624  
Total redeemable convertible preferred stock
                      37,506       27,562  
Total stockholders’ equity (deficit)
    110,227       94,919       87,556       (24,290 )     (25,359 )
 
ITEM 7.   MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
 
The information contained in this section has been derived from our consolidated financial statements and should be read together with our consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K. This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities and Exchange act of 1934, as amended, and are subject to the “safe harbor” created by those sections. In particular, statements contained in this Annual Report on Form 10-K that are not historical facts, including, but not limited to statements concerning new product sales, product development and offerings, Roomba, Scooba, Looj, Verro and ConnectR products, PackBot tactical military robots, our home robot and government and industrial robot divisions, competition and strategy and our market position, market acceptance of our products, seasonal factors, revenue recognition, profits, growth of revenues, composition of revenues, cost of revenues, operating expenses, sales, marketing and support expenses, general and administrative expenses, research and development expenses, compensation costs, our ability to attract and retain qualified personnel, credit facility and equipment facility, valuations of investments, valuation and composition of stock-based awards, SFAS No. 123(R), and liquidity, constitute forward-looking statements and are made under these safe harbor provisions. Some of the forward-looking statements can be identified by the use of forward-looking terms such as “believes,” “expects,” “may,” “will,” “should,” “could,” “seek,” “intends,” “plans,” “estimates,” “anticipates,” or other comparable terms. Forward-looking statements involve inherent risks and uncertainties that could cause actual results to differ materially from those in the forward-looking statements. We urge you to consider the risks and uncertainties discussed in greater detail under the heading “Risk Factors” in evaluating our forward-looking statements. We have no plans to update our forward-looking statements to reflect events or circumstances after the date of this report. We caution readers not to place undue reliance upon any such forward-looking statements, which speak only as of the date made.
 
Overview
 
iRobot provides robots that enable people to complete complex tasks in a better way. Founded in 1990 by roboticists who performed research at the Massachusetts Institute of Technology, we have developed proprietary technology incorporating advanced concepts in navigation, mobility, manipulation and artificial intelligence to build industry-leading robots. Our Roomba floor vacuuming robot and Scooba floor washing robot perform time-


38


Table of Contents

consuming domestic chores, in the home, while our Looj gutter cleaning robot and Verro pool cleaning robot perform tasks outside the home, and our PackBot tactical military robots perform battlefield reconnaissance and bomb disposal. In addition, we are developing the Small Unmanned Ground Vehicle reconnaissance robot for the U.S. Army’s FCS program. We sell our robots to consumers through a variety of distribution channels, including chain stores and other national retailers, and our on-line store, and to the U.S. military and other government agencies worldwide.
 
As of December 29, 2007, we had 423 full-time employees. We have developed expertise in all the disciplines necessary to build durable, high-performance and cost-effective robots through the close integration of software, electronics and hardware. Our core technologies serve as reusable building blocks that we adapt and expand to develop next generation and new products, reducing the time, cost and risk of product development. Our significant expertise in robot design and engineering, combined with our management team’s experience in military and consumer markets, positions us to capitalize on the expected growth in the market for robots.
 
Over the past five years, we have sold more than 3 million of our home care robots. We have also sold more than 1,200 of our PackBot tactical military robots, most of which have been sold to the U.S. military and deployed on missions in Afghanistan and Iraq.
 
Although we have successfully launched consumer and military products, our continued success depends upon our ability to respond to a number of future challenges. We believe the most significant of these challenges include increasing competition in the markets for both our consumer and military products, our ability to obtain U.S. federal government funding for research and development programs, and our ability to successfully develop and introduce products and product enhancements.
 
Initial Public Offering
 
On November 15, 2005, we completed our initial public offering of 4,945,000 shares of common stock at $24.00 per share, comprised of 3,260,870 primary shares and 1,684,130 shares offered by selling stockholders, which includes the exercise of the over-allotment option by the underwriters of the offering. In connection with the offering, all of the outstanding shares of our preferred stock were converted into an equal number of shares of common stock. The sale of the 3,260,870 shares of common stock in connection with our initial public offering resulted in net proceeds to us of approximately $70.4 million after deducting underwriters’ discounts and offering-related expenses. A summary of the terms of the offering can be found in our Registration Statement No. 333-126907 on Form S-1, as amended, as filed with the Securities and Exchange Commission.
 
Revenue
 
We currently derive revenue from product sales and research and development programs. Product revenue is derived from the sale of our various home care robots and PackBot robots and related accessories. Research and development revenue is derived from the execution of contracts awarded by the U.S. federal government, other governments and a small number of other partners. In the future, we expect to derive increasing revenue from product maintenance and support services due to a focused effort to market these services to the expanding installed base of our robots.
 
We currently derive a majority of our product revenue from the sale of our home care robots and our PackBot tactical military robots. For the fiscal years ended December 29, 2007 and December 30, 2006, product revenues accounted for 91.3% and 88.7% of total revenue, respectively. For the fiscal years ended December 29, 2007 and December 30, 2006, our funded research and development contracts accounted for approximately 8.7% and 11.3% of our total revenue, respectively. We expect to continue to perform funded research and development work with the intent of leveraging the technology developed to advance our new product development efforts. In the future, however, we expect that revenue from funded research and development contracts could grow modestly on an absolute dollar basis and represent a decreasing percentage of our total revenue due to the anticipated growth in consumer and military product revenue.
 
For the fiscal years ended December 29, 2007 and December 30, 2006 approximately 59.3% and 65.4%, respectively, of our home robot product revenue resulted from sales to 15 customers, primarily U.S. retailers.


39


Table of Contents

Direct-to-consumer revenue generated through our iRobot on-line store accounted for 23.4% of our home robot product revenue for the fiscal year ended December 29, 2007 compared to 16.0% in the fiscal year ended December 30, 2006. In addition, 86.0% and 88.4% of military product revenue, and 72.4% and 76.2% of funded research and development contract revenue, resulted from orders and contracts with the U.S. federal government in the fiscal years ended December 29, 2007 and December 30, 2006, respectively.
 
For the fiscal years ended December 29, 2007 and December 30, 2006, sales to non-U.S. customers accounted for 13.1% and 11.0% of total revenue, respectively.
 
Our revenue from product sales is generated through sales to our retail distribution channels, our distributor network and to certain U.S. and foreign governments. In 2002, when our Roomba robot was first commercially introduced and throughout 2003, we recognized revenue from our U.S. consumer product sales on a “sell-through basis” (when retail stores sold our Roomba robots to end users). In the first quarter of 2004, we began recognizing revenue from U.S. consumer product sales on a “sell-in basis” (when our robots are shipped by us to the retail stores). As a result of this change in accounting treatment, in the first quarter of 2004 we recognized $5.7 million of product revenue from products shipped prior to 2004. This one-time increase impacts period-to-period comparisons relating to 2004. Revenue from sales of our military robots is recognized upon the later to occur of shipment or customer acceptance.
 
Revenue from consumer product sales is significantly seasonal, with a majority of our consumer product revenue generated in the second half of the year (in advance of the holiday season). The timing of holiday season shipments could materially affect our third or fourth quarter consumer product revenue in any fiscal year. Revenue from our military robot sales and revenue from funded research and development contracts are occasionally influenced by the September 30 fiscal year-end of the U.S. federal government, but are not otherwise significantly seasonal. In addition, our revenue can be affected by the timing of the release of new products and the award of new contracts.
 
Cost of Revenue
 
Cost of product revenue includes the cost of raw materials and labor that go into the development and manufacture of our products as well as manufacturing overhead costs such as manufacturing engineering, quality assurance, logistics and warranty costs. For the fiscal years ended December 29, 2007 and December 30, 2006, cost of product revenue was 64.9% and 61.8% of total product revenue, respectively. Raw material costs, which are our most significant cost items, can fluctuate materially on a periodic basis, although many components have been historically stable. Additionally, unit costs can vary significantly depending on the mix of products sold. During 2007 in particular, the cost of some materials increased significantly, especially nickel (for batteries). The aggregate cost of batteries for our home robots was especially impacted in 2007, as nickel prices more than doubled on a per ton basis. There can be no assurance that our costs of raw materials will not increase. Labor costs also comprise a significant portion of our cost of revenue. Compared to our PackBot tactical military robots, labor costs for our home robots comprise a greater percentage of the associated cost of revenue. We outsource the manufacture of our home robots to contract manufacturers in China. While labor costs in China traditionally have been favorable compared to labor costs elsewhere in the world, including the United States, we believe that labor in China is becoming more scarce. Consequently, the labor costs for our home robots could increase in the future.
 
Cost of contract revenue includes the direct labor costs of engineering resources committed to funded research and development contracts, as well as third-party consulting, travel and associated direct material costs. Additionally, we include overhead expenses such as indirect engineering labor, occupancy costs associated with the project resources, engineering tools and supplies and program management expenses. For the fiscal years ended December 29, 2007 and December 30, 2006, cost of contract revenue was 87.0% and 73.2% of total contract revenue, respectively.
 
Gross Profit
 
Our gross profit as a percentage of revenue varies according to the mix of product and contract revenue, the mix of products sold, total sales volume, and levels of other product costs such as warranty, scrap, re-work and


40


Table of Contents

manufacturing overhead. For the years ended December 29, 2007 and December 30, 2006, gross profit was 33.2% and 36.9% of total revenue, respectively.
 
As a result of our change in accounting from a “sell-through” to “sell-in” basis in the first quarter of 2004, we recognized $2.5 million of gross profit in the first quarter of 2004, which disproportionately increased our gross profit as a percentage of revenues in that quarter and in 2004.
 
Research and Development Expenses
 
Research and development expenses consist primarily of:
 
  •  salaries and related costs for our engineers;
 
  •  costs for high technology components used in product and prototype development; and
 
  •  costs of test equipment used during product development.
 
We have significantly expanded our research and development capabilities and expect to continue to expand these capabilities in the future. An example of this is the engineering design center we opened in India late in 2005. A substantial portion of our research and development is performed in the United States, although we maintain an increasing number of engineering personnel in India and Hong Kong to serve as a liaison between our U.S.-based engineering staff and our outsourced manufacturer in China. We are committed to increasing the level of innovative design and development of new products as we strive to enhance our ability to serve our existing consumer and military markets as well as new markets for robots. Accordingly, we anticipate that research and development expenses will continue to increase in absolute dollars for the foreseeable future.
 
For the fiscal years ended December 29, 2007 and December 30, 2006, research and development expense was $17.1 million and $17.0 million, or 6.9% and 9.0% of total revenue, respectively.
 
In addition to our internal research and development activities discussed above, we incur research and development expenses under funded development arrangements with both governments and other third parties. For the fiscal years ended December 29, 2007 and December 30, 2006, these expenses amounted to $18.8 million and $15.6 million, respectively. In accordance with generally accepted accounting principles, these expenses have been classified as cost of revenue rather than research and development expense.
 
Selling, General and Administrative Expenses
 
Our selling, general and administrative expenses consist primarily of:
 
  •  salaries and related costs for sales and marketing personnel;
 
  •  salaries and related costs for executives and administrative personnel;
 
  •  advertising, marketing and other brand-building costs;
 
  •  fulfillment costs associated with direct-to-consumer sales through the iRobot on-line store;
 
  •  customer service costs;
 
  •  professional services costs;
 
  •  information systems and infrastructure costs;
 
  •  travel and related costs; and
 
  •  occupancy and other overhead costs.
 
As we focus on increasing our market penetration and continuing to build brand awareness, we anticipate that selling, general and administrative expenses will continue to increase in absolute dollars for the foreseeable future, as we intend to continue aggressively building on the iRobot brand.
 
For the fiscal years ended December 29, 2007 and December 30, 2006, selling, general and administrative expense was $65.8 million and $52.7 million, or 26.4% and 27.9% of total revenue, respectively.


41


Table of Contents

Litigation and Related Expenses
 
In fiscal 2007, we incurred $2.3 million of litigation and settlement-related costs associated with two related lawsuits filed by us in August 2007. The first of these lawsuits was filed in Massachusetts Superior Court, and subsequently transferred to the United States District Court for the District of Massachusetts, against Robotic FX, Inc. and Jameel Ahed alleging, among other things, misappropriation of trade secrets and breach of contract. The second lawsuit was filed in the United States District Court for the Northern District of Alabama against Robotic FX, Inc. alleging willful infringement of two patents owned by us. See Item 3 — Legal Proceedings included elsewhere in the Annual Report on Form 10-K for a more detailed discussion of this litigation and related settlement.
 
Fiscal Periods
 
Historically, our fiscal year ended on December 31 and our fiscal quarters ended on March 31, June 30, September 30 and December 31. Reference to fiscal 2004, for example, refers to the fiscal year ended December 31, 2004. Beginning in fiscal 2005, we began to operate and report using a 52-53 week fiscal year ending on the Saturday closest to December 31. Accordingly, each of our fiscal quarters ends on the Saturday that falls closest to the last day of the third calendar month of the quarter.
 
Critical Accounting Policies and Estimates
 
Our consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. We evaluate our estimates and assumptions on an ongoing basis. Our actual results may differ from these estimates.
 
We believe that of our significant accounting policies, which are described in the notes to our consolidated financial statements, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, we believe that the following accounting policies are the most critical to aid in fully understanding and evaluating our consolidated financial condition and results of operations.
 
Revenue Recognition
 
We recognize revenue from sales of consumer products under the terms of the customer agreement upon transfer of title to the customer, provided the price is fixed or determinable, collection is determined to be probable and no significant obligations remain. Sales to resellers are subject to agreements allowing for limited rights of return for defective products only, rebates and price protection. We have typically not taken product returns except for defective products. Accordingly, we reduce revenue for our estimates of liabilities for these rights at the time the related sale is recorded. We establish a provision for sales returns for products sold by resellers directly or through our distributors based on historical return experience. We have aggregated and analyzed historical returns from resellers and end users which form the basis of our estimate of future sales returns by resellers or end users. In accordance with Statement of Financial Accounting Standards No. 48 “Revenue Recognition When Right of Return Exists,” the provision for these estimated returns is recorded as a reduction of revenue at the time that the related revenue is recorded. If actual returns from retailers differ significantly from our estimates, such differences could have a material impact on our results of operations for the period in which the actual returns become known. Our returns reserve is calculated as a percentage of gross consumer product revenue. A one percentage point increase or decrease in our actual experience of returns would have a material impact on our quarterly and annual results of operations. The estimates for returns are adjusted periodically based upon historical rates of returns. The estimates and reserve for rebates and price protection are based on specific programs, expected usage and historical experience. Actual results could differ from these estimates. Through 2003, we recognized revenue on sales to certain distributors and retail customers upon their sale to the end user. Starting in the first quarter of 2004, as a result of our accumulation of sufficient experience to reasonably estimate allowances for product returns, we adopted the standard industry practice of recognizing revenue on all sales upon delivery of product to distributors and retail stores and established a related allowance for future returns based upon historical experience. If future


42


Table of Contents

trends or our ability to estimate were to change significantly from those experienced in the past, incremental reductions or increases to revenue may result based on this new experience.
 
Under cost-plus research and development contracts, we recognize revenue based on costs incurred plus a pro-rata portion of the total fixed fee. We recognize revenue on fixed-price contracts using the percentage-of- completion method. Costs and estimated gross profits on contracts are recorded as work is performed based on the percentage that incurred costs bear to estimated total costs utilizing the most recent estimates of costs and funding. Changes in job performance, job conditions and estimated profitability, including those arising from final contract settlements, may result in revisions to costs and income, and are recorded or recognized, as the case may be, in the period in which the revisions are determined. Since many contracts extend over a long period of time, revisions in cost and funding estimates during the progress of work have the effect of adjusting earnings applicable to past performance in the current period. When the current contract estimate indicates a loss, provision is made for the total anticipated loss in the current period. Revenue earned in excess of billings, if any, is recorded as unbilled revenue. Billings in excess of revenue earned, if any, are recorded as deferred revenue.
 
Accounting for Stock-Based Awards
 
Effective January 1, 2006, we adopted the provisions of Statement of Financial Accounting Standards, or SFAS, No. 123(R), Share-Based Payment, which establishes accounting for equity instruments exchanged for employee services. Under the provisions of SFAS No. 123(R), share-based compensation cost is measured at the grant date, based on the calculated fair value of the award, and is recognized as an expense over the employee’s requisite service period (generally the vesting period of the equity grants). Prior to January 1, 2006, we accounted for share-based compensation to employees in accordance with Accounting Principles Board Opinion, or APB, No. 25, Accounting for Stock Issued to Employees, and related interpretations. We also followed the disclosure requirements of SFAS No. 123, Accounting for Stock-Based Compensation, as amended by SFAS No. 148, Accounting for Stock-Based Compensation — Transition and Disclosure. We elected to adopt the modified prospective transition method as provided by SFAS No. 123(R) and, accordingly financial statement amounts for the prior periods presented in this Annual Report on Form 10-K have not been restated to reflect the fair value method of expensing share-based compensation.
 
In a review of our stock-based compensation accounting methodology performed in the fiscal quarter ended June 30, 2007, we determined that a cumulative adjustment of $0.5 million of incremental stock-based compensation expense, and a balance sheet reclassification of $0.8 million from deferred compensation to additional paid-in capital, were required due to a correction in the application of SFAS No. 123(R). Upon adoption of SFAS No. 123(R) on January 1, 2006, we incorrectly valued 259,700 stock options that were granted between the date that we filed our initial Form S-1 registration statement with the Securities and Exchange Commission, or SEC, on July 27, 2005 and the date we became a public company (November 8, 2005). We believe, in accordance with APB No. 28, Interim Financial Reporting, paragraph 29, that this adjustment was not material to our full year results for 2007. In addition, we do not believe the adjustment is material to the amounts reported by us in previous periods. This cumulative adjustment was recorded during the three month period ended June 30, 2007 and is included in the cost of revenue and operating expenses for the fiscal year ended December 29, 2007.
 
Under SFAS No. 123(R), entities that become public companies after June 15, 2005 and used the minimum value method of measuring equity share options and similar instruments as a non-public company for either recognition or pro forma disclosure purposes under SFAS No. 123 shall apply the provisions of SFAS No. 123(R) prospectively to new and/or modified awards after the adoption of SFAS No. 123(R). Companies should continue to account for any portion of awards outstanding at the date of initial application of SFAS No. 123(R) using the accounting principles originally applied to those awards — either the minimum value method under SFAS No. 123 or the provisions of APB No. 25 and its related interpretive guidance. Accordingly, we did not record any cumulative effect of a change in accounting principle associated with the adoption of SFAS No. 123(R). As of December 29, 2007, the deferred stock-based compensation balance associated with these grants was $0.7 million. We will continue to recognize the associated stock-based compensation expense, in accordance with the provisions of APB No. 25, related to these shares of $0.3 million, $0.3 million and $0.1 million for 2008, 2009 and 2010, respectively.


43


Table of Contents

Under the provisions of SFAS No. 123(R), we recognized $4.5 million of stock-based compensation expense during the fiscal year ended December 29, 2007 for stock options granted subsequent to our initial filing of our Form S-1 with the SEC. The unamortized fair value as of December 29, 2007 associated with these grants was $15.8 million with a weighted average remaining recognition period of 2.68 years.
 
The fair value of each option grant for the fiscal year ended December 29, 2007 was computed on the grant date using the Black-Scholes option-pricing model with the following assumptions:
 
     
    Fiscal Year Ended
    December 29, 2007
 
Risk-free interest rate
  3.23% — 4.90%
Expected dividend yield
 
Expected life
  3.50 — 4.75 years
Expected volatility
  50% — 55%
 
The risk-free interest rate is derived from the average U.S. Treasury constant maturity rate, which approximates the rate in effect at the time of grant, commensurate with the expected life of the instrument. The dividend yield is zero based upon the fact that we have never paid and have no present intention to pay cash dividends. The expected term calculation is based upon the simplified method provided under SEC Staff Accounting Bulletin (“SAB”) No. 107. Under SAB No. 107, the expected term is developed by averaging the contractual term of the stock option grants (7 or 10 years) with the associated vesting term (typically 4 to 5 years). Given our initial public offering in November 2005 and the resulting short history as a public company, we could not rely solely on company specific historical data for purposes of establishing expected volatility. Consequently, we performed an analysis that included company specific historical data combined with data of several peer companies with similar expected option lives to develop an expected volatility assumption.
 
Based upon the above assumptions, the weighted average fair value of each stock option granted for the fiscal year ended December 29, 2007 was $8.64.
 
During the fiscal year ended December 29, 2007, the Company recognized $116,000 and $43,000 of stock based compensation associated with restricted stock awards and restricted stock units, respectively. Unamortized expense associated with restricted stock awards and restricted stock units at December 29, 2007, was $363,000 and $429,000, respectively.
 
We have assumed a forfeiture rate of 5% for all stock options, restricted stock awards and restricted stock-based units granted subsequent to the Company’s initial filing of its Form S-1 with the SEC with the exception of those issued to executives and directors for which forfeiture rates of 0% and 2.5% were assumed for fiscal years 2006 and 2007, respectively. In the future, we will record incremental stock-based compensation expense if the actual forfeiture rates are lower than estimated and will record a recovery of prior stock-based compensation expense if the actual forfeitures are higher than estimated.
 
SFAS No. 123(R) requires significant judgment and the use of estimates, particularly surrounding assumptions such as stock price volatility and expected option lives, as well as expected option forfeiture rates to value equity-based compensation.
 
Accounting for Income Taxes
 
Deferred taxes are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect in the years in which the differences are expected to reverse. Valuation allowances are provided if based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
 
We have $8.6 million of federal net operating loss carry-forwards as of December 29, 2007 relating to stock option deductions for which the tax effected amount of approximately $2.9 million would be credited to additional paid-in capital upon realization. The use of these net operating loss carry-forwards may be limited by changes in our ownership. We expect that these net operating loss carry-forwards will impact our tax liability over the next several


44


Table of Contents

years. There, however, can be no assurance as to the rate at which these net operating loss carry-forwards can be utilized, or as to whether there will be any other tax incentives available after 2007.
 
We monitor the realization of our deferred tax assets based on changes in circumstances, for example, recurring periods of income for tax purposes following historical periods of cumulative losses or changes in tax laws or regulations. Our income tax provision and our assessment of the realizability of our deferred tax assets involve significant judgments and estimates. In fiscal 2007, we completed an analysis of historical and projected future profitability which resulted in the full release of the valuation allowance relating to federal deferred tax assets. We continue to maintain a valuation allowance against state deferred tax assets due to less certainty of their realizability given the shorter expiration period associated with these state deferred tax assets and the generation of state tax credits in excess of the state tax liability. At December 29, 2007, we have total deferred tax assets of $12.9 million and a valuation allowance of $2.7 million resulting in a net deferred tax asset of $10.2 million.
 
Warranty
 
We typically provide a one-year warranty against defects in materials and workmanship and will either repair the goods, provide replacement products at no charge to the customer or refund amounts to the customer for defective products. We record estimated warranty costs, based on historical experience by product, at the time we recognize product revenue. As the complexity of our products increases, we could experience higher warranty claims relative to sales than we have previously experienced, and we may need to increase these estimated warranty reserves.
 
Inventory Valuation
 
We value our inventory at the lower of the actual cost of our inventory or its current estimated market value. We write down inventory for obsolescence or unmarketable inventories based upon assumptions about future demand and market conditions. Because of the seasonality of our consumer product sales and inventory levels, obsolescence of technology and product life cycles, we generally write down inventory to net realizable value based on forecasted product demand. Actual demand and market conditions may be lower than those that we project and this difference could have a material adverse effect on our gross profit if inventory write-downs beyond those initially recorded become necessary. Alternatively, if actual demand and market conditions are more favorable than those we estimated at the time of such a write-down, our gross profit could be favorably impacted in future periods.


45


Table of Contents

Overview of Results of Operations
 
The following table sets forth our results of operations for the periods shown:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Revenue
                       
Product revenue
  $ 227,457     $ 167,687     $ 124,616  
Contract revenue
    21,624       21,268       17,352  
                         
Total revenue
    249,081       188,955       141,968  
                         
Cost of Revenue
                       
Cost of product revenue(1)
    147,689       103,651       81,855  
Cost of contract revenue(1)
    18,805       15,569       12,534  
                         
Total cost of revenue
    166,494       119,220       94,389  
                         
Gross profit
    82,587       69,735       47,579  
Operating Expenses
                       
Research and development(1)
    17,082       17,025       11,601  
Selling and marketing(1)
    44,894       33,969       21,796  
General and administrative(1)
    20,919       18,703       12,072  
Litigation and related expenses(2)
    2,341              
                         
Total operating expenses
    85,236       69,697       45,469  
                         
Operating (Loss) Income
    (2,649 )     38       2,110  
Other Income (Expense), Net
    3,151       3,831       676  
                         
Income Before Income Taxes
    502       3,869       2,786  
Income Tax Expense (Benefit)
    (8,558 )     304       176  
                         
Net Income
  $ 9,060     $ 3,565     $ 2,610  
                         
 
 
(1) Stock-based compensation recorded in 2007, 2006 and 2005 breaks down by expense classification as follows.
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Cost of product revenue
  $ 692     $ 326     $ 33  
Cost of contract revenue
    386       267       58  
Research and development
    377       376       95  
Selling and marketing
    1,074       389       32  
General and administrative
    2,182       1,211       380  
 
(2) Consists of costs for litigation relating to lawsuits filed against Robotic FX, Inc. and Jameel Ahed, as well as settlement costs related to ending the litigation. See Item 3 — Legal Proceedings included elsewhere in this Annual Report on Form 10-K for a more detailed discussion of this litigation.


46


Table of Contents

The following table sets forth our results of operations as a percentage of revenue for the periods shown:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
 
Revenue
                       
Product revenue
    91.3 %     88.7 %     87.8 %
Contract revenue
    8.7       11.3       12.2  
                         
Total revenue
    100.0       100.0       100.0  
                         
Cost of Revenue
                       
Cost of product revenue
    59.3       54.9       57.7  
Cost of contract revenue
    7.5       8.2       8.8  
                         
Total cost of revenue
    66.8       63.1       66.5  
                         
Gross profit
    33.2       36.9       33.5  
Operating Expenses
                       
Research and development
    6.9       9.0       8.2  
Selling and marketing
    18.0       18.0       15.3  
General and administrative
    8.4       9.9       8.5  
Litigation and related expenses
    1.0              
                         
Total operating expenses
    34.3       36.9       32.0  
                         
Operating (Loss) Income
    (1.1 )     0.0       1.5  
Other Income (Expense), Net
    1.3       2.0       0.4  
                         
Income Before Income Taxes
    0.2       2.0       1.9  
Income Tax Expense (Benefit)
    (3.4 )     0.1       0.1  
                         
Net Income
    3.6 %     1.9 %     1.8 %
                         
 
Comparison of Years Ended December 29, 2007 and December 30, 2006
 
Revenue
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total Revenue
  $ 249,081     $ 188,955     $ 60,126       31.8 %
 
Our revenue increased 31.8% to $249.1 million in fiscal 2007 from $189.0 million in fiscal 2006. Revenue increased approximately $32.1 million, or 28.5%, in our home robots business and $28.1 million, or 36.7%, in our government and industrial business.
 
The $32.1 million increase in revenue from our home robots division was driven by a $28.2 million increase in robot revenue due to a 23.9% increase in units shipped and a 2.1% increase in average selling prices, along with a $3.8 million increase in product life cycle revenue (spares and accessories). Total home care robots shipped in fiscal 2007 totalled approximately 899,000 units compared to approximately 725,000 units in fiscal 2006.
 
The $28.1 million increase in revenue from our government and industrial business was driven by a $20.0 million increase in military robots revenue due to a 22.3% increase in units shipped and a 20.4% increase in net average selling prices, and a $7.7 million increase in product life cycle revenue (robot spares, services and training). Total military robots shipped in fiscal 2007 was 471 units compared to 385 units in fiscal 2006.


47


Table of Contents

Cost of Revenue
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total cost of revenue
  $ 166,494     $ 119,220     $ 47,274       39.7 %
As a percentage of total revenue
    66.8 %     63.1 %                
 
Total cost of revenue increased to $166.5 million in fiscal 2007, compared to $119.2 million in fiscal 2006. The increase is primarily due to a 23.9% increase in the unit sales of our home care robots, and a 22.3% increase in the unit sales of our military robots in fiscal 2007 as compared to fiscal 2006.
 
The home robots division cost of revenue increased as a percent of revenue by 7.2 percentage points in fiscal 2007 as compared to fiscal 2006. This increase was primarily attributable to a 15.4% increase in average unit costs driven primarily by the mix of higher cost products and increased battery costs due to the increased cost of nickel.
 
The government and industrial robots division cost of revenue decreased as a percent of revenue by 1.3 percentage points for fiscal 2007 as compared to fiscal 2006. This decrease was due to the above-mentioned increase in average selling prices and higher margins on increased product life cycle revenue, partially offset by a 3.1% increase in the average unit cost of products sold.
 
Gross Profit
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total gross profit
  $ 82,587     $ 69,735     $ 12,852       18.4 %
As a percentage of total revenue
    33.2 %     36.9 %                
 
Gross profit increased 18.4% to $82.6 million in fiscal 2007, from $69.7 million in fiscal 2006. Gross profit as a percentage of revenue decreased to 33.2% in fiscal 2007 from 36.9% of revenue in fiscal 2006. This 3.7 percentage decrease in gross profit was the result of the home robots division gross profit decreasing 7.2 percentage points partially offset by the government and industrial gross profit increasing 1.3 percentage points, and the higher mix of government and industrial revenue in fiscal 2007 as compared to fiscal 2006. The home robots division decrease was driven primarily by higher average unit costs due to the mix of higher cost products and increased battery costs, while the government and industrial increase was driven by the mix of higher margin products and a higher percentage of product revenue as compared to contract revenue in fiscal 2007 as compared to fiscal 2006.
 
Research and Development
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total research and development
  $ 17,082     $ 17,025     $ 57       0.3 %
As a percentage of total revenue
    6.9 %     9.0 %                
 
Research and development expenses increased by $0.1 million or 0.3% to $17.1 million (6.9% percent of revenue) in fiscal 2007, from $17.0 million (9.0% of revenue) for fiscal 2006. The home robots division research and development expenses increased in fiscal 2007 as compared to fiscal 2006 due to hiring, depreciation and costs associated with the India design center, offset by reductions in the government and industrial division. This reduction in government and industrial expenses was largely attributable to the fact that 2006 expenses included accelerated spending as a result of our decision to invest higher than planned earnings in research and development activities, a strategy that was not repeated in 2007.
 
Overall internal research and development headcount increased to 105 at December 29, 2007 compared to 104 as of December 30, 2006, an increase of 1 employee.


48


Table of Contents

In addition to our internal research and development activities discussed above, we incur research and development expenses under funded development arrangements with both governments and industrial third parties. For fiscal 2007 these expenses amounted to $18.8 million compared to $15.6 million for the comparable period in 2006. The increase in these expenses was primarily due to increased headcount in our contract research and development function to 64 employees at December 29, 2007 from 58 employees at December 30, 2006. In accordance with generally accepted accounting principles, these expenses have been classified as cost of revenue rather than research and development expense as they are executed under funded research contracts.
 
Selling and Marketing
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total selling and marketing
  $ 44,894     $ 33,969     $ 10,925       32.2 %
As a percentage of total revenue
    18.0 %     18.0 %                
 
Selling and marketing expenses increased by $10.9 million or 32.2% to $44.9 million (18.0% of revenue) in fiscal 2007 from $34.0 million (18.0% of revenue) in fiscal 2006.
 
The $8.7 million increase in the home robot division selling and marketing expense was primarily driven by a $12 million increase in costs associated with our increased direct business, including both website sales and infomercial programs which were run earlier in the year, offset by lower television media expenses. Additionally, trade shows and other marketing related activities increased by $1.3 million, people related costs increased by $0.7 million and sales commissions increased by $0.6 million.
 
Government and industrial division selling and marketing expenses were up $2.4 million for fiscal 2007 as compared to fiscal 2006 due primarily to $0.9 million of increased compensation and benefit related expense resulting from the expansion of our sales team, $0.3 million increased travel costs, $0.5 million in increased sales commission due to a new commissions program and $0.4 million increase in stock compensation expense.
 
In fiscal 2008, we expect to continue to invest in sales and marketing to increase brand awareness. Accordingly, we anticipate selling and marketing expenses will increase in absolute dollars.
 
Overall selling and marketing headcount increased to 36 at December 29, 2007 compared to 31 as of December 30, 2006, an increase of 5 employees or 16% growth.
 
General and Administrative
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
General and administrative
  $ 20,919     $ 18,703     $ 2,216       11.8 %
As a percentage of total revenue
    8.4 %     9.9 %                
 
General and administrative expenses increased by $2.2 million or 11.8% to $20.9 million (8.4% of revenue) in fiscal 2007 from $18.7 million (9.9% of revenue) in fiscal 2006. The increase in general and administrative expense was primarily driven by an increase of $1.1 million in compensation and benefits expenses due to increased headcount, and an increase of $1.0 million in stock compensation expense for fiscal 2007 as compared to fiscal 2006. In fiscal 2008, we anticipate general and administrative expenses will increase in absolute dollars in support of efforts to improve scalability, attend to new business complexity, and expand operations globally.
 
Overall general and administrative headcount increased to 88 at December 29, 2007 compared to 72 as of December 30, 2006, an increase of 16 employees or 22% growth.


49


Table of Contents

Litigation and Related Expenses
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
 
Litigation and related expenses
  $ 2,341           $ 2,341       N/A  
As a percentage of total revenue
    1.0 %                        
 
Litigation and related expenses consist of costs for trade secret misappropriation, breach of contract and patent infringement litigation relating to lawsuits filed against Robotic FX, Inc. and Jameel Ahed as well as settlement costs related to ending the litigation.
 
Other Income (Expense), Net
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Other Income (expense), net
  $ 3,151     $ 3,831     $ (680 )     (17.7 )%
As a percentage of total revenue
    1.3 %     2.0 %                
 
For fiscal 2007, other income (expense), net amounted to $3.2 million compared to $3.8 million in fiscal 2006. The other income (expense), net was directly related to interest income resulting from our cash and investments in auction rate securities and money market accounts.
 
Income Tax Provision
 
                                 
    Fiscal Year Ended              
    December 29,
    December 30,
             
    2007     2006     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Income tax provision (benefit)
  $ (8,558 )   $ 304     $ (8,862 )     N/A  
As a percentage of total revenue
    (3.4 )%     0.1 %                
 
In fiscal 2007, we recorded an $8.6 million tax benefit, which was primarily attributable to the full release of the valuation allowance relating to federal deferred tax assets. The provision for income taxes for fiscal 2006 consists of $0.2 million of federal alternative minimum taxes and $0.1 million of state taxes.
 
Comparison of Years Ended December 30, 2006 and December 31, 2005
 
Revenue
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total Revenue
  $ 188,955     $ 141,968     $ 46,987       33.1 %
 
Our revenue increased 33.1% to $189.0 million in fiscal 2006 from $142.0 million in fiscal 2005. Revenue increased approximately $18.4 million, or 19.7%, in our home robots business and $28.6 million, or 59.6%, in our government and industrial business.
 
The $18.4 million increase in revenue from our home robots division was driven primarily by the initial distribution into the retail channel of our Scooba floor washing robot, which was released late in 2005, continued demand for our Roomba floor vacuuming robot and an 8.2% increase in net average selling prices. Total home floor care robots shipped in fiscal 2006 was approximately 725,000 units compared to approximately 663,000 units in fiscal 2005. Included in this $18.4 million growth was an increase of approximately $9.4 million in sales through our direct on-line store as compared to $8.6 million of direct revenue in fiscal 2005. During fiscal 2005, we reduced our home robots products return reserve accrual rate based on an analysis that indicated that our actual customer return rates had decreased significantly and, accordingly, during the third quarter we revised our returns reserve rate and reduced the returns reserve as of October 1, 2005. As a result of this decrease, during the third quarter of 2005,


50


Table of Contents

we recognized an additional $2.7 million of home robot product revenue related to robots shipped both during the third quarter of 2005 and during prior periods.
 
The $28.6 million increase in revenue from our government and industrial business for fiscal 2006 as compared to fiscal 2005 was due to a 52.8% increase in the number of military robots shipped combined with a 5.5% increase in associated net average selling prices, a 30.9% increase in recurring contract revenues generated under funded research and development contracts and the impact of $2.2 million associated with the United Kingdom Ministry of Defence contract modification. Also included in this $28.6 million growth was an increase of approximately $7.5 million in product life cycle revenue (robot spares), as compared to $5.4 million of product life cycle revenue in fiscal 2005, which was primarily driven by the increased demand for our military robots. Total military robot units shipped in fiscal 2006 was 385 compared to 252 in fiscal 2005. This unit increase was directly related to 229 units shipped under our contract with the Naval Sea Systems Command for Man Transportable Robotics Systems.
 
Cost of Revenue
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total cost of revenue
  $ 119,220     $ 94,389     $ 24,831       26.3 %
As a percentage of total revenue
    63.1 %     66.5 %                
 
Total cost of revenue increased to $119.2 million in fiscal 2006, compared to $94.4 million in fiscal 2005. The increase is primarily attributable to a 9.4% increase in the unit sales of our home floor care robots, a 52.8% increase in the unit sales of our military robots and higher costs associated with a 30.9% increase in recurring contract revenues generated under funded research and development contracts in fiscal 2006 as compared to fiscal 2005.
 
The home robots division cost of revenue decreased as a percent of revenue by 1.2 percentage points in fiscal 2006 as compared to fiscal 2005. This decrease was attributable to the above-mentioned increase in average selling prices offset by a 6.4% increase in average unit costs as a result of a shift in the product mix of the home floor care robots that we sold. In particular, the average unit cost increase was largely attributable to a significant number of Scooba floor washing robots shipped in fiscal 2006. Our Scooba floor washing robot carries a higher per unit cost than our Roomba floor vacuuming robot which represented nearly 100% of home floor care robots shipped in fiscal 2005.
 
The government and industrial robots division cost of revenue decreased as a percent of revenue by 8.8 percentage points for fiscal 2006 as compared to fiscal 2005. This decrease was due primarily to the above-mentioned increase in average selling prices, a 9.1% reduction in the average unit cost of product sold, higher margins on increased product life cycle revenue and lower cost of warranty partially offset by higher manufacturing overhead.
 
Gross Profit
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total gross profit
  $ 69,735     $ 47,579     $ 22,156       46.6 %
As a percentage of total revenue
    36.9 %     33.5 %                
 
Gross profit increased 46.6% to $69.7 million in fiscal 2006, from $47.6 million in fiscal 2005. Gross profit as a percentage of revenue increased to 36.9% in fiscal 2006 from 33.5% of revenue in fiscal 2005. This 3.4 percentage increase in gross profit was the result of the home robots division gross profit increasing 1.2 percentage points and the government and industrial gross profit increasing 8.8 percentage points. These increases were partially offset by the fact that the home robots division, which carries a higher overall gross profit than the government and industrial division, accounted for 63.6% of total gross profit in fiscal 2006 as compared to 75.5% in fiscal 2005. Included in


51


Table of Contents

the total gross profit for fiscal 2006 was $2.6 million associated with the United Kingdom Ministry of Defence contract modification, which accounted for 0.6 percentage points of the year over year improvement in gross profit as a percent of revenue.
 
Research and Development
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total research and development
  $ 17,025     $ 11,601     $ 5,424       46.8 %
As a percentage of total revenue
    9.0 %     8.2 %                
 
Research and development expenses increased by $5.4 million or 46.8% to $17.0 million (9.0% percent of revenue) in fiscal 2006, from $11.6 million (8.2% of revenue) for fiscal 2005. The increase in research and development expense is primarily due to an increase of $3.6 million in compensation and benefit related expenses attributed to increased headcount. Consulting and related material costs associated with internal research projects increased by $1.9 million and $1.3 million, respectively. Additionally, $0.4 million of the increase related to increased occupancy and depreciation expenses that include the addition of the Mysore, India office, which opened in late 2005, as well as increased depreciation expense on computer equipment related to increased headcount. These increases were offset by a reduction of $2.3 million in internally funded research and development projects primarily related to the Scooba floor washing robot, which was launched late in the fourth quarter of 2005.
 
Overall internal research and development headcount increased to 104 at December 30, 2006 compared to 72 as of December 31, 2005, an increase of 32 employees or 44% growth.
 
In addition to our internal research and development activities discussed above, we incur research and development expenses under funded development arrangements with both governments and industrial third parties. For fiscal 2006 these expenses amounted to $15.6 million compared to $12.5 million for the comparable period in 2005. The increase in these expenses was primarily due to increased headcount in our contract research and development function to 58 employees at December 30, 2006 from 48 employees at December 31, 2005. In accordance with generally accepted accounting principles, these expenses have been classified as cost of revenue rather than research and development expense.
 
Selling and Marketing
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Total selling and marketing
  $ 33,969     $ 21,796     $ 12,173       55.8 %
As a percentage of total revenue
    18.0 %     15.4 %                
 
Selling and marketing expenses increased by $12.2 million or 55.8% to $34.0 million (18.0% of revenue) in fiscal 2006 from $21.8 million (15.4% of revenue) in fiscal 2005. The increase in selling and marketing expense was primarily driven by an increase in home robot division selling and marketing expense of $9.3 million over fiscal 2005. This increase was primarily made up of $2.9 million of increased television advertising and related production costs, $2.9 million increase in direct fulfillment costs associated with the $9.4 million increase in our direct on-line store sales, $1.7 million increased cooperative advertising, $0.7 million increased compensation and benefit related expense, $0.7 million increased customer service costs and $0.5 million increased sales commissions. All of these increases are attributable to the increase in fiscal 2006 of $18.4 million of home robot revenue as compared to fiscal 2005. Government and industrial division selling and marketing expenses were up $1.8 million for fiscal 2006 as compared to fiscal 2005 due primarily to $0.5 million of increased bid and proposal activities, $0.4 million of increased compensation and benefit related expense attributed to incremental headcount and $0.2 million increased travel costs. Corporate sales and marketing increased $1.0 million of which $0.6 million relates to public relations expenses.


52


Table of Contents

Overall selling and marketing headcount increased to 31 at December 30, 2006 compared to 24 as of December 31, 2005, an increase of 7 employees or 29% growth.
 
General and Administrative
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
General and administrative
  $ 18,703     $ 12,072     $ 6,631       54.9 %
As a percentage of total revenue
    9.9 %     8.5 %                
 
General and administrative expenses increased by $6.6 million or 54.9% to $18.7 million (9.9% of revenue) in fiscal 2006 from $12.1 million (8.5% of revenue) in fiscal 2005. The increase in general and administrative expense was primarily driven by an increase of $2.7 million in compensation, benefits, occupancy, depreciation and other people related expenses due to increased headcount over the comparable period and $0.4 million related to increases in software maintenance and general liability insurance. Also included in the $6.6 million increase was $2.2 million relating to costs incurred on professional accounting, legal and other costs associated with being a public company, including costs associated with Section 404 of the Sarbanes-Oxley, all of which were not required in 2005 as we were a private company for the majority of the year. SFAS No. 123(R) stock-based compensation costs totaling $0.8 million were recorded, a factor that did not exist in the comparable period.
 
Overall general and administrative headcount increased to 72 at December 30, 2006 compared to 61 as of December 31, 2005, an increase of 11 employees or 18% growth.
 
Other Income (Expense), Net
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Other Income (expense), net
  $ 3,831     $ 676     $ 3,155       466.7 %
As a percentage of total revenue
    2.0 %     0.4 %                
 
For fiscal 2006, other income (expense), net amounted to $3.8 million compared to $0.7 million in fiscal 2005. The other income (expense), net was directly related to $4.0 million of interest income resulting from the investment of net proceeds from our initial public offering that occurred in November, 2005.
 
Income Tax Provision
 
                                 
    Fiscal Year Ended              
    December 30,
    December 31,
             
    2006     2005     Dollar Change     Percent Change  
    (Dollars in thousands)        
 
Income tax provision
  $ 304     $ 176     $ 128       72.7 %
As a percentage of total revenue
    0.1 %     0.1 %                
 
The provision for income taxes for fiscal 2006 consists of $0.2 million of federal alternative minimum taxes and $0.1 million of state taxes compared to $0.2 million of federal alternative minimum taxes in fiscal 2005.
 
Liquidity and Capital Resources
 
At December 29, 2007 our principal sources of liquidity were cash and cash equivalents totaling $26.7 million, short-term investments of $16.6 million and accounts receivable of $47.7 million. Prior to our initial public offering in November 2005, we funded our growth primarily with proceeds from the issuance of convertible preferred stock for aggregate net cash proceeds of $37.5 million, occasional borrowings under a working capital line of credit and cash generated from operations. In the initial public offering, we raised $70.4 million net of underwriting and professional fees associated with this offering.


53


Table of Contents

As of February 21, 2008, we held $17.5 million of variable rate bonds or auction rate securities, all of which were purchased in January or February of 2008. A substantial majority of the underlying assets of these auction rate securities are student loans which are backed by the federal government under the Federal Family Education Loan Program. On February 19, 2008 one auction failed for $2.5 million of our auction rate securities and there is no assurance that auctions on the remaining auction rate securities in our investment portfolio will succeed in the future. See Item 7A — Quantitative And Qualitative Disclosures About Market Risk, included elsewhere in this Annual Report on Form 10-K for a more detailed discussion of these auction rate securities.
 
We manufacture and distribute our products through contract manufacturers and third-party logistics providers. We believe that this approach gives us the advantages of relatively low capital investment and significant flexibility in scheduling production and managing inventory levels. By leasing our office facilities, we also minimize the cash needed for expansion. Accordingly, our capital spending is generally limited to leasehold improvements, computers, office furniture and product-specific production tooling, internal use software and test equipment. In fiscal 2007 and 2006, we spent $10.4 million and $7.5 million, respectively, on capital equipment.
 
During 2006, our strategy for delivering product to our retail customers changed from a model that emphasized container shipments directly to the retailer from China to a model emphasizing improved logistics capabilities that allow our retail partners to take possession of product on a domestic basis. Accordingly, our home robots product inventory consists of goods shipped to our third-party logistic providers for the fulfillment of retail orders and direct-to-consumer sales. Our inventory of military products is minimal as they are generally built to order. Our contract manufacturers are responsible for purchasing and stocking the components required for the production of our products, and they invoice us when the finished goods are shipped.
 
Our consumer product sales are, and are expected to continue to be, highly seasonal. This seasonality typically results in a net use of cash in support of operating needs during the first half of the year with the low point generally occurring in the middle of the third quarter, and a favorable cash flow during the second half of the year. In the past, we have relied on our working capital line of credit to cover the short-term cash needs resulting from the seasonality of our consumer business.
 
Discussion of Cash Flows
 
Net cash used by our operating activities in fiscal 2007 was $15.7 million compared to net cash provided by operating activities of $0.6 million in fiscal 2006 and net cash used by operating activities of $9.0 million in fiscal 2005. The cash used by our operating activities in fiscal 2007 was primarily due to an increase in accounts receivable (including unbilled revenue) of $19.5 million and an increase in inventory of $24.3 million, offset by net income of $9.1 million, a decrease in other current other assets of $0.6 million, an increase in accounts payable and accrued expenses of $17.4 million and an increase in deferred revenue of $1.1 million. In addition, in fiscal 2007, we had depreciation and amortization of approximately $5.3 million and amortization of deferred compensation of $4.7 million, offset by a $10.2 million benefit from deferred tax assets which are non-cash items. The increase in accounts receivable, inventory and liabilities in fiscal 2007 are directly attributable to the 31.9% growth in revenue from the comparable period in fiscal 2006. The cash provided by our operating activities in fiscal 2006 was primarily due to net income of $3.6 million and an increase in accounts payable, accrued expenses and accrued compensation of $8.7 million, offset by an increase in accounts receivable and unbilled revenue of $6.0 million, an increase in inventory of $5.0 million, an increase in other assets of $1.3 million, and a decrease in provision for contract settlement and deferred revenue of $5.7 million. In addition, in fiscal 2006, we had depreciation and amortization of approximately $3.7 million and amortization of deferred compensation of $2.6 million, both of which are non-cash expenses. The increase in accounts receivable, inventory and liabilities in fiscal 2006 are directly attributable to the 33.1% growth in revenue from the comparable period in fiscal 2005. The cash used by our operating activities in fiscal 2005 was primarily due to an increase in accounts receivable of $9.8 million, an increase in inventory of $8.2 million, an increase in other current assets of $1.1 million, and an increase in unbilled revenue of $0.7 million, offset by net income of $2.6 million, and an increase in liabilities of approximately $5.5 million. In addition, in fiscal 2005, we had depreciation and amortization of approximately $2.1 million and amortization of deferred compensation of $0.6 million, both of which are non-cash expenses. The increase in accounts receivable, inventory and liabilities in fiscal 2005 are directly attributable to the 49.4% growth in revenue from the comparable period in fiscal 2004.


54


Table of Contents

Net cash provided by our investing activities was $35.4 million in fiscal 2007 compared to net cash used by investing activities of $72.3 million in fiscal 2006 and $5.5 million in fiscal 2005. Investment activities in 2007 represent the sale of short-term investments (net of the purchase of short-term investments) of $48.3 million, the purchase of capital equipment of $10.4 million and an investment in Advanced Scientific Concepts, Inc. of $2.5 million. Investment activities in 2006 represent the purchase of short-term investments (net of the sale of short-term investments) of $64.8 million and the purchase of capital equipment of $7.5 million. Investment activities in 2005 represent the purchase of capital equipment in support of our growth, including computer equipment, internal use software, furniture and fixtures, engineering and test equipment, and production tooling. The 2007 investment in capital equipment of $10.4 million consisted primarily of purchases of production tooling, internal use demonstration units, internal use software and computer equipment.
 
Net cash provided by our financing activities was approximately $1.4 million in fiscal 2007, $1.2 million in fiscal 2006, and $71.1 million in fiscal 2005. Net cash provided by our financing activities in fiscal 2007 consisted primarily of proceeds from stock option exercises and the tax benefit associated with excess stock-based compensation deductions, partially offset by a tax payment associated with exercise of stock options by our Chief Executive Officer. Net cash provided by our financing activities in fiscal 2006 consisted primarily of proceeds from stock option exercises. Net cash provided by our financing activities in fiscal 2005 consisted primarily of $70.4 million of proceeds from our initial public offering and $0.7 million from the exercise of common stock options.
 
The majority of our long-lived assets for the years ended December 29, 2007, December 30, 2006 and December 31, 2005 are located in the United States. However, we have invested in production tooling for the manufacture of the Roomba, Scooba and Looj product lines in China.
 
We currently have a $11.6 million accumulated deficit as a result of significant losses incurred through 2003, largely attributable to our investment in internally funded research and development. Based on our historical product development efforts, we launched our first commercial products, our Roomba floor vacuuming robot and our PackBot tactical military robot, in fiscal 2002. Since fiscal 2002, our revenue has significantly increased, our investment in internally-funded research and development has declined as a percentage of revenue, and we achieved annual profitability since fiscal 2004. We have not invested significantly in property, plant and equipment, primarily as a result of our outsourced approach to manufacturing that provides significant flexibility in both managing inventory levels and financing our inventory. Our consumer revenue has been highly seasonal. This seasonality tends to result in the net use of cash during the second and third quarters and significant generation of cash in the fourth and first quarters of the year. Given the recent success of our products and resulting growth in revenue, we believe that existing cash, cash equivalents, cash provided by operating activities and funds available through our bank line of credit will be sufficient to meet our working capital and capital expenditure needs for the next twelve months and the foreseeable future.
 
Working Capital Facility
 
On June 5, 2007, we entered into a $35 million unsecured revolving credit facility with Bank of America, N.A. to replace our expired working capital line of credit with Bank of America. The credit facility will be available to fund working capital and other corporate purposes. The interest on loans under our working capital line of credit will accrue, at our election, at either (i) Bank of America’s prime rate minus 1% or (ii) the Eurodollar rate plus 1.25%. The credit facility will terminate and all amounts outstanding thereunder will be due and payable in full on June 5, 2010. As of December 29, 2007, we had letters of credit outstanding of $2.1 million and $32.9 million available under our working capital line of credit. This credit facility contains customary terms and conditions for credit facilities of this type, including restrictions on our ability to incur or guarantee additional indebtedness, create liens, enter into transactions with affiliates, make loans or investments, sell assets, pay dividends or make distributions on, or repurchase, our stock, and consolidate or merge with other entities.
 
In addition, we are required to meet certain financial covenants customary with this type of agreement, including maintaining a minimum specified tangible net worth, a minimum specified ratio of current assets to current liabilities and a minimum specified annual net income.


55


Table of Contents

This credit facility contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness,bankruptcy and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, our obligations under the credit facility may be accelerated. At December 29, 2007, we were in compliance with all covenants under the credit facility.
 
Equipment Financing Facility
 
On June 5, 2007, we entered into a $15 million secured equipment facility with Banc of America Leasing and Capital, LLC under which we can finance the acquisition of equipment, furniture and leasehold improvements. We may borrow amounts under the equipment facility until July 1, 2008 and any amounts borrowed during that period will accrue interest at 30-day LIBOR plus 1%. After July 1, 2008, all amounts then outstanding under the equipment line will be repaid in 60 equal monthly installments commencing in July 2008 and will accrue interest, at our election, at either a fixed or variable rate of interest. Our obligations under the equipment facility will be secured by any financed equipment. As of December 29, 2007, we had no amounts outstanding and $15.0 million available under our equipment financing line of credit.
 
This equipment facility contains customary terms and conditions for equipment facilities of this type, including, without limitation, restrictions on our ability to transfer, encumber or dispose of the financed equipment. In addition, we are required to meet certain financial covenants customary to this type of agreement, including maintaining a minimum specified tangible net worth, a minimum specified ratio of current assets to current liabilities and a minimum specified annual net income.
 
This equipment facility contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness, bankruptcy and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, or if we repay all of our indebtedness under our credit facility with Bank of America, N.A., our obligations under this equipment facility may be accelerated. At December 29, 2007, we were in compliance with all covenants under the equipment facility.
 
Working Capital and Capital Expenditure Needs
 
We currently have no material cash commitments, except for normal recurring trade payables, expense accruals and operating leases, all of which we anticipate funding through our existing working capital line of credit, working capital and funds provided by operating activities. We do anticipate making significant capital commitments in the next four months for expenditures associated with the planned move to our new corporate headquarters on or about May 1, 2008. These expenditures will be jointly funded by the landlord for this site and by us. Other than this project, we do not currently anticipate significant investment in property and equipment, and we believe that our outsourced approach to manufacturing provides us with flexibility in both managing inventory levels and financing our inventory. We believe our existing cash, cash equivalents, cash provided by operating activities, and funds available through our working capital line of credit will be sufficient to meet our working capital and capital expenditure needs over at least the next twelve months. In the event that our revenue plan does not meet our expectations, we may eliminate or curtail expenditures to mitigate the impact on our working capital. Our future capital requirements will depend on many factors, including our rate of revenue growth, the expansion of our marketing and sales activities, the timing and extent of spending to support product development efforts, the timing of introductions of new products and enhancements to existing products, the acquisition of new capabilities or technologies, and the continuing market acceptance of our products and services. Moreover, to the extent that existing cash, cash equivalents, cash from operations, and cash from short-term borrowing are insufficient to fund our future activities, we may need to raise additional funds through public or private equity or debt financing. Although we are currently not a party to any agreement or letter of intent with respect to potential investments in, or acquisitions of, businesses, services or technologies, we may enter into these types of arrangements in the future, which could also require us to seek additional equity or debt financing. Additional funds may not be available on terms favorable to us or at all.


56


Table of Contents

Contractual Obligations
 
We generally do not enter into binding purchase commitments. Our principal commitments consist of obligations under our working capital line of credit, leases for office space and minimum contractual obligations for services. The following table describes our commitments to settle contractual obligations in cash as of December 29, 2007:
 
                                         
    Payments Due by Period  
    Less Than
    1 to 3
    3 to 5
    More Than
       
    1 Year     Years     Years     5 Years     Total  
    (In thousands)  
 
Operating leases
  $ 3,295     $ 4,563     $ 4,372     $ 15,333     $ 27,563  
Minimum contractual payments
    125       8,500       10,500       1,500       20,625  
                                         
Total
  $ 3,420     $ 13,063     $ 14,872     $ 16,833     $ 48,188  
                                         
 
On February 22, 2007, we entered into a lease agreement for our new corporate headquarters in Bedford, Massachusetts to which we expect to relocate on or about May 1, 2008.
 
Off-Balance Sheet Arrangements
 
As of December 29, 2007, we had no off-balance sheet arrangements as defined in Item 303(a)(4) of Regulation S-K.
 
Recently Issued Accounting Pronouncements
 
In September 2006, the Financial Accounting Standards Board, or FASB issued SFAS No. 157, Fair Value Measurements which defines fair value, establishes guidelines for measuring fair value and expands disclosures regarding fair value measurements. SFAS 157 does not require any new fair value measurements but rather eliminates inconsistencies in guidance found in various prior accounting pronouncements. SFAS 157 is effective for fiscal years beginning after November 15, 2007. However, on February 12, 2008, the FASB issued FSP FAS 157-2 which delays the effective date of SFAS 157 for all nonfinancial assets and nonfinancial liabilities, except those that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually). This FSP partially defers the effective date of Statement 157 to fiscal years beginning after November 15, 2008, and interim periods within those fiscal years for items within the scope of this FSP. Effective for fiscal 2008, we will adopt SFAS 157 except as it applies to those nonfinancial assets and nonfinancial liabilities as noted in FSP FAS 157-2. The partial adoption of SFAS 157 is not expected to have a material impact on our results of operations or financial condition.
 
In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial Liabilities — Including an Amendment of FASB Statement No. 115, or SFAS 159. SFAS 159 permits entities to choose fair value measurement for many financial instruments and certain other items as of specified election dates. Business entities will thereafter report in earnings the unrealized gains and losses on items for which the fair value option has been chosen. The fair value option may be applied instrument by instrument, may not be applied to portions of instruments and is irrevocable unless a new election date occurs. SFAS 159 is effective for an entity’s first fiscal year beginning after November 15, 2007. We are currently evaluating the potential impact of adoption of SFAS 159 and have not yet determined the impact, if any, that its adoption will have on our results of operations or financial condition.
 
In December 2007, the FASB issued SFAS No. 141 (revised 2007), or SFAS 141R, Business Combinations and SFAS No. 160 or SFAS 160, Noncontrolling Interests in Consolidated Financial Statements, an amendment of Accounting Research Bulletin No. 51. SFAS 141R will change how business acquisitions are accounted for and will impact financial statements both on the acquisition date and in subsequent periods. SFAS 160 will change the accounting and reporting for minority interests, which will be recharacterized as noncontrolling interests and classified as a component of equity. The provisions of SFAS 141R and SFAS 160 are effective for fiscal years beginning on or after December 15, 2008. We are currently evaluating the impact that SFAS 141R and SFAS 160 will have on our results of operations or financial condition.


57


Table of Contents

From time to time, new accounting pronouncements are issued by FASB that are adopted by us as of the specified effective date. Unless otherwise discussed, we believe that the impact of recently issued standards, which are not yet effective, will not have a material impact on our consolidated financial statements upon adoption.
 
ITEM 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
 
Foreign Currency Exchange Risk
 
We maintain sales and business operations in foreign countries. As such, we have exposure to adverse changes in exchange rates associated with operating expenses of our foreign operations, but we believe this exposure to be immaterial. In late 2007, we began to accept orders for home robot products in currencies other than the U.S. dollar and we expect this practice to continue in the future. We regularly monitor the level of non-U.S. dollar accounts receivable balances to determine if any actions, including possibly entering into foreign currency forward contracts, should be taken to minimize the impact of fluctuating exchange rates on our results of operations.
 
Interest Rate Sensitivity
 
We had unrestricted cash and cash equivalents of $26.7 million and short term investments of $16.6 million at December 29, 2007. The unrestricted cash and cash equivalents are held for working capital purposes. We do not enter into investments for trading or speculative purposes. Some of the securities in which we invest, however, may be subject to market risk. This means that a change in prevailing interest rates may cause the principal amount of the investment to fluctuate. To minimize this risk in the future, we intend to maintain our portfolio of cash equivalents and short-term investments in a variety of securities, including auction rate securities, commercial paper, money market funds, debt securities and certificates of deposit. As of December 29, 2007, all of our cash equivalents were held in money market accounts and our short-term investments were comprised of auction rate securities.
 
As of February 21, 2008, we held $17.5 million of variable rate bonds or auction rate securities, all of which were purchased in January or February of 2008. A substantial majority of the underlying assets of these auction rate securities are student loans which are backed by the federal government under the Federal Family Education Loan Program. On February 19, 2008 one auction failed for $2.5 million of our auction rate securities and there is no assurance that auctions on the remaining auction rate securities in our investment portfolio will succeed in the future. As a result, our ability to liquidate our investments in the near term may be limited, and our ability to fully recover the carrying value of our investments may be limited or non-existent. An auction failure means that the parties wishing to sell securities could not carry out the transaction. All of our auction rate securities, including those subject to the prior failures, are currently rated AAA, the highest rating available by a rating agency. If the issuers are unable to successfully close future auctions or their credit ratings deteriorate, we may in the future be required to record an impairment charge on these investments. We believe we will be able to liquidate our investments without significant loss but the timing of such an outcome is uncertain. We currently believe these securities are not significantly impaired, primarily due to the government backing of the underlying securities. However, it could take until the final maturity of the underlying notes (up to 40 years) to realize our investments’ recorded value. Based on our expected operating cash flows, and our other potential sources of cash, including our available line of credit, we do not anticipate that the potential lack of liquidity on these investments in the near-term will affect our ability to execute our current business plan.
 
Our exposure to market risk also relates to the increase or decrease in the amount of interest expense we must pay on our outstanding debt instruments, primarily certain borrowings under our working capital line of credit and our equipment financing facility. The advances under the working capital line of credit bear a variable rate of interest determined as a function of the prime rate or the Eurodollar rate at the time of the borrowing. The advances under the equipment financing facility bear either a variable or fixed rate of interest, at our election, determined as a function of the LIBOR rate at the time of borrowing. At December 29, 2007, there were no amounts outstanding under our working capital line of credit or our equipment financing facility.


58


 

ITEM 8.   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
iROBOT CORPORATION
 
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
 
         
    Page
 
    60  
    61  
    62  
    63  
    64  
    65  
 EX-10.10 Form of Executive Agreement
 EX-10.19 Non-Employee Directors Deferred Compensation Program
 EX-23.1 Consent of PricewaterhouseCoopers LLP
 EX-31.1 Section 302 Certification of CEO
 EX-31.2 Section 302 Certification of CFO
 EX-32.1 Section 906 Certification of CEO & CFO


59


Table of Contents

 
Report of Independent Registered Public Accounting Firm
 
To Board of Directors and Stockholders of
iRobot Corporation:
 
In our opinion, the consolidated financial statements listed in the index appearing under Item 15 (a) (1) present fairly, in all material respects, the financial position of iRobot Corporation, and its subsidiaries at December 29, 2007 and December 30, 2006 and the results of their operations and their cash flows for each of the three years in the period ended December 29, 2007 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 29, 2007, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control Over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
 
As discussed in note 2 to the consolidated financial statements, the Company changed the manner in which it accounts for share-based compensation in 2006.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
/s/ PricewaterhouseCoopers LLP
 
Boston, Massachusetts
February 25, 2008


60


Table of Contents

iROBOT CORPORATION
 
CONSOLIDATED BALANCE SHEETS
 
                 
    December 29,
    December 30,
 
    2007     2006  
    (In thousands)  
 
ASSETS
Current assets:
               
Cash and cash equivalents
  $ 26,735     $ 5,583  
Short term investments
    16,550       64,800  
Accounts receivable, net of allowance of $65 and $163 at December 29, 2007 and December 30, 2006, respectively
    47,681       28,510  
Unbilled revenue
    2,244       1,961  
Inventory, net
    45,222       20,890  
Deferred tax assets
    5,905        
Other current assets
    2,268       2,863  
                 
Total current assets
    146,605       124,607  
Property and equipment, net
    15,694       10,701  
Deferred tax assets
    4,293        
Other assets
    2,500        
                 
Total assets
  $ 169,092     $ 135,308  
                 
LIABILITIES, REDEEMABLE CONVERTIBLE PREFERRED STOCK AND
STOCKHOLDERS’ EQUITY (DEFICIT)
Current liabilities:
               
Accounts payable
  $ 44,697     $ 27,685  
Accrued expenses
    7,987       7,020  
Accrued compensation
    4,603       5,227  
Deferred revenue
    1,578       457  
                 
Total current liabilities
    58,865       40,389  
Commitments and contingencies (Note 12):
               
Redeemable convertible preferred stock, 5,000 shares authorized and zero outstanding at December 29, 2007 and December 30, 2006
           
Common stock, $0.01 par value, 100,000 and 100,000 shares authorized and 24,495 and 23,791 issued and outstanding at December 29, 2007 and December 30, 2006, respectively
    245       238  
Additional paid-in capital
    122,318       117,718  
Deferred compensation
    (685 )     (2,326 )
Accumulated deficit
    (11,651 )     (20,711 )
                 
Total stockholders’ equity
    110,227       94,919  
                 
Total liabilities, redeemable convertible preferred stock and stockholders’ equity
  $ 169,092     $ 135,308  
                 
 
See accompanying Notes to Consolidated Financial Statements


61


Table of Contents

iROBOT CORPORATION
 
CONSOLIDATED STATEMENTS OF OPERATIONS
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands, except per share amounts)  
 
Revenue:
                       
Product revenue
  $ 227,457     $ 167,687     $ 124,616  
Contract revenue
    21,624       21,268       17,352  
                         
Total revenue
    249,081       188,955       141,968  
Cost of revenue:
                       
Cost of product revenue(1)
    147,689       103,651       81,855  
Cost of contract revenue(1)
    18,805       15,569       12,534  
                         
Total cost of revenue
    166,494       119,220       94,389  
                         
Gross profit
    82,587       69,735       47,579  
Operating expenses:
                       
Research and development(1)
    17,082       17,025       11,601  
Selling and marketing(1)
    44,894       33,969       21,796  
General and administrative(1)
    20,919       18,703       12,072  
Litigation and related expenses(2)
    2,341              
                         
Total operating expenses
    85,236       69,697       45,469  
                         
Operating (loss) income
    (2,649 )     38       2,110  
Other income (expense), net
    3,151       3,831       676  
                         
Income before income taxes
    502       3,869       2,786  
Income tax expense (benefit)
    (8,558 )     304       176  
                         
Net income
  $ 9,060     $ 3,565     $ 2,610  
                         
Net income attributable to common stockholders
  $ 9,060     $ 3,565     $ 1,553  
                         
Net income per share
                       
Basic
  $ 0.37     $ 0.15     $ 0.13  
Diluted
  $ 0.36     $ 0.14     $ 0.11  
Number of shares used in per share calculations
                       
Basic
    24,229       23,516       12,007  
Diluted
    25,501       25,601       14,331  
 
 
(1) Stock-based compensation recorded in 2007, 2006 and 2005 breaks down by expense classification as follows:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Cost of product revenue
  $ 692     $ 326     $ 33  
Cost of contract revenue
    386       267       58  
Research and development
    377       376       95  
Selling and marketing
    1,074       389       32  
General and administrative
    2,182       1,211       380  
 
(2) Consists of costs for litigation relating to lawsuits filed against Robotic FX, Inc. and Jameel Ahed, as well as settlement costs related to ending the litigation. See Item 3 — Legal Proceedings included elsewhere in this Annual Report on Form 10-K for a more detailed discussion of this litigation.
 
See accompanying Notes to Consolidated Financial Statements


62


Table of Contents

iROBOT CORPORATION
 
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)
 
                                                         
                      Note
                   
                Additional
    Receivable
                   
    Common Stock     Paid-In
    from
    Deferred
    Accumulated
       
    Shares     Value     Capital     Stockholder     Compensation     Deficit     Total  
    (In thousands, except share amounts)  
 
Balance at December 31, 2004
    10,129,457     $ 101     $ 2,925     $ (43 )   $ (387 )   $ (26,886 )   $ (24,290 )
Amortization of deferred compensation relating to restricted stock
                                    200               200  
Issuance of common stock for exercise of stock options
    442,204       4       633                               637  
Repayment of note receivable from stockholder
                            43                       43  
Conversion of preferred to common stock
    9,557,246       96       37,411                               37,507  
Proceeds of initial public offering, net of costs
    3,260,870       33       70,374                               70,407  
Conversion of warrants to common stock
    16,155                                                
Deferred compensation relating to issuance of stock options
                    3,421               (3,421 )              
Tax benefit of disqualifying dispositions
                    44                               44  
Amortization of deferred compensation relating to stock options
                                    398               398  
Net income
                                            2,610       2,610  
                                                         
Balance at December 31, 2005
    23,405,932       234       114,808             (3,210 )     (24,276 )     87,556  
Amortization of deferred compensation relating to restricted stock
                                    101               101  
Issuance of common stock for exercise of stock options
    384,827       4       1,045                               1,049  
Tax benefit of disqualifying dispositions
                    180                               180  
Amortization of deferred compensation relating to stock options
                    1,768               700               2,468  
Reversal of deferred compensation related to cancelled stock options
                    (83 )             83                
Net income
                                            3,565       3,565  
                                                         
Balance at December 30, 2006
    23,790,759       238       117,718             (2,326 )     (20,711 )     94,919  
Amortization of deferred compensation relating to restricted stock
                                    59               59  
Issuance of common stock for exercise of stock options
    793,283       8       1,380                               1,388  
Stock withheld to cover tax withholdings requirements upon exercise of stock options
    (110,396 )     (1 )     (1,587 )                             (1,588 )
Repurchase of restricted stock award
    (4,047 )                                                
Cumulative adjustment to stock based compensation
                    (836 )             836                
Issuance of restricted stock awards
    25,332                                                  
Tax benefit of excess stock based compensation deduction
                    1,626                               1,626  
Amortization of deferred compensation relating to stock options
                    4,477               175               4,652  
Reversal of deferred compensation related to cancelled stock options
                    (571 )             571                
Director’s deferred compensation
                    111                               111  
Net income
                                            9,060       9,060  
                                                         
Balance at December 29, 2007
    24,494,931     $ 245     $ 122,318     $     $ (685 )   $ (11,651 )   $ 110,227  
                                                         
 
See accompanying Notes to Consolidated Financial Statements


63


Table of Contents

iROBOT CORPORATION
 
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Cash flows from operating activities:
                       
Net income
  $ 9,060     $ 3,565     $ 2,610  
Adjustments to reconcile net income to net cash provided by (used in) operating activities
                       
Depreciation and amortization
    5,311       3,743       2,078  
Loss on disposal of fixed assets
    48       7        
Stock based compensation
    4,711       2,569       598  
Benefit from deferred tax assets
    (10,198 )            
Non-cash director deferred compensation
    111              
Changes in working capital — (use) source
                       
Accounts receivable
    (19,171 )     (5,465 )     (9,786 )
Unbilled revenue
    (283 )     (537 )     (650 )
Inventory
    (24,332 )     (4,987 )     (8,235 )
Other current assets
    595       (1,330 )     (1,051 )
Accounts payable
    17,012       3,964       4,140  
Accrued expenses
    967       3,536       842  
Accrued compensation
    (624 )     1,225       851  
Provision for contract settlement
          (5,154 )     (37 )
Deferred revenue
    1,121       (561 )     (270 )
Change in long-term liabilities
                (67 )
                         
Net cash provided by (used in) operating activities
    (15,672 )     575       (8,977 )
Cash flows from investing activities:
                       
Purchase of property and equipment
    (10,352 )     (7,485 )     (5,531 )
Change in other assets
    (2,500 )            
Purchase of investments
    (52,950 )     (174,100 )      
Sales of investments
    101,200       109,300        
                         
Net cash provided by (used in) investing activities
    35,398       (72,285 )     (5,531 )
Cash flows from financing activities:
                       
Repayment of note receivable from stockholder
                43  
Income tax withholding payment associated with stock option exercise
    (1,588 )            
Proceeds from stock option exercises
    1,388       1,049       637  
Proceeds from initial public offering, net of offering costs
                70,407  
Tax benefit of excess stock based compensation deductions
    1,626              
Tax benefit of disqualifying dispositions
          180       44  
                         
Net cash provided by financing activities
    1,426       1,229       71,131  
                         
Net increase (decrease) in cash and cash equivalents
    21,152       (70,481 )     56,623  
Cash and cash equivalents, at beginning of period
    5,583       76,064       19,441  
                         
Cash and cash equivalents, at end of period
  $ 26,735     $ 5,583     $ 76,064  
                         
Supplemental disclosure of cash flow information
                       
Cash paid for interest
  $ 41     $ 15     $ 13  
Cash paid for income taxes
  $ 140     $ 155     $ 11  
 
Supplemental disclosure of noncash investing and financing activities (in thousands)
 
During 2007, 2006 and 2005, the Company transferred $1,509, $1,260 and $327, respectively, of inventory to fixed assets.
 
On November 15, 2005, in connection with the Company’s initial public offering of common stock, the Company converted 9,557 shares of outstanding preferred stock into an equivalent number of shares of common stock.
 
See accompanying Notes to Consolidated Financial Statements


64


Table of Contents

iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
1.   Nature of the Business
 
iRobot Corporation, formerly IS Robotics, Inc., was incorporated in 1990 to develop robotics and artificial intelligence technologies and apply these technologies in producing and marketing robots. The majority of the Company’s revenue is generated from product sales, and government and industrial research and development contracts.
 
The Company is subject to risks common to companies in high-tech industries including, but not limited to, uncertainty of progress in developing technologies, new technological innovations, dependence on key personnel, protection of proprietary technology, compliance with government regulations, uncertainty of market acceptance of products and the need to obtain financing, if necessary.
 
2.   Summary of Significant Accounting Policies
 
Basis of Presentation
 
The accompanying consolidated financial statements include those of iRobot and our subsidiaries, after elimination of all intercompany accounts and transactions. iRobot has prepared the accompanying consolidated financial statements in conformity with accounting principles generally accepted in the United States of America.
 
Use of Estimates
 
The preparation of these financial statements in conformity with accounting principles generally accepted in the United States of America requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and disclosure of contingent assets and liabilities. On an ongoing basis, management evaluates these estimates and judgments, including those related to revenue recognition, sales returns, bad debts, warranty claims, inventory reserves, valuation of investments and income taxes. The Company bases these estimates on historical and anticipated results and trends and on various other assumptions that the Company believes are reasonable under the circumstances, including assumptions as to future events. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. By their nature, estimates are subject to an inherent degree of uncertainty. Actual results may differ from the Company’s estimates.
 
Reclassification
 
Certain reclassifications have been made to the prior year financial statements to conform to the current year presentation.
 
Fiscal Year-End
 
Beginning in fiscal 2005, the Company operates and reports using a 52-53 week fiscal year ending on the Saturday closest to December 31. Accordingly, the Company’s fiscal quarters will end on the Saturday that falls closest to the last day of the third month of each quarter.
 
Cash and Cash Equivalents
 
The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the time of purchase to be cash equivalents. The Company invests its excess cash primarily in money market funds of major financial institutions. Accordingly, its cash equivalents are subject to minimal credit and market risk. At December 29, 2007 and December 30, 2006, cash equivalents were comprised of money market funds totaling $23.3 million and $3.8 million, respectively. These cash equivalents are carried at cost, which approximates fair value.


65


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Short Term Investments
 
The Company’s investments are classified as available-for-sale and are recorded at fair value with any unrealized gain or loss recorded as an element of stockholders’ equity. The fair value of investments is determined based on quoted market prices at the reporting date for those instruments. As of December 29, 2007, and December 30, 2006, investments consisted of:
 
                                 
    December 29,
    December 30,
 
    2007     2006  
          Fair
          Fair
 
    Cost     Market Value     Cost     Market Value  
    (In thousands)  
 
Auction Rate Debt Securities
  $ 16,550     $ 16,550     $ 64,800     $ 64,800  
 
As of December 29, 2007, the Company’s investments had maturity dates ranging from February 2025 to June 2047. Despite the long-term contractual maturities of the auction rate securities held at December 29, 2007, all of these securities were available for sale and it was the Company’s intention to liquidate these securities within one year. Subsequent to December 29, 2007, the $16.6 million of auction rate securities held at December 29, 2007 have been liquidated.
 
Revenue Recognition
 
The Company derives its revenue from product sales, government research and development contracts and commercial research and development contracts. The Company sells products directly to customers and indirectly through resellers and distributors. The Company recognizes revenue from sales of consumer robots under the terms of the customer agreement upon transfer of title to the customer, net of estimated returns, provided that collection is determined to be probable and no significant obligations remain. Sales to resellers are subject to agreements allowing for limited rights of return for defective products only, rebates and price protection. The Company has typically not taken product returns except for defective products. Accordingly, the Company reduces revenue for its estimates of liabilities for these rights at the time the related sale is recorded. The Company makes an estimate of sales returns for products sold by resellers directly or through its distributors based on historical returns experience. The Company has aggregated and analyzed historical returns from resellers and end users which form the basis of its estimate of future sales returns by resellers or end users. In accordance with Statement of Financial Accounting Standards No. 48, “Revenue Recognition When Right of Return Exists,” the provision for these estimated returns is recorded as a reduction of revenue at the time that the related revenue is recorded. If actual returns differ significantly from its estimates, such differences could have a material impact on the Company’s results of operations for the period in which the returns become known. The estimates for returns are adjusted periodically based upon historical rates of returns. The estimates and reserve for rebates and price protection are based on specific programs, expected usage and historical experience. Actual results could differ from these estimates.
 
Under cost-plus-fixed-fee (CPFF) type contracts, the Company recognizes revenue based on costs incurred plus a pro rata portion of the total fixed fee. Revenue on firm fixed price (FFP) contracts is recognized using the percentage-of-completion method. Costs and estimated gross profits on contracts are recorded as revenue as work is performed based on the percentage that incurred costs bear to estimated total costs utilizing the most recent estimates of costs and funding. Changes in job performance, job conditions, and estimated profitability, including those arising from final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined. Since many contracts extend over a long period of time, revisions in cost and funding estimates during the progress of work have the effect of adjusting earnings applicable to past performance in the current period. When the current contract estimate indicates a loss, provision is made for the total anticipated loss in the current period. Revenue earned in excess of billings, if any, is recorded as unbilled revenue. Billings in excess of revenue earned, if any, are recorded as deferred revenue.


66


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Allowance for Doubtful Accounts
 
The Company maintains an allowance for doubtful accounts to provide for the estimated amount of accounts receivable that may not be collected. The allowance is based upon an assessment of customer creditworthiness, historical payment experience and the age of outstanding receivables.
 
Activity related to the allowance for doubtful accounts was as follows:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Balance at beginning of period
  $ 163     $ 117     $ 50  
Provision
          121       83  
Deduction(*)
    (98 )     (75 )     (16 )
                         
Balance at end of period
  $ 65     $ 163     $ 117  
                         
 
 
(*) Deductions related to allowance for doubtful accounts represent amounts written off against the allowance, less recoveries.
 
Inventory
 
Inventory is stated at the lower of cost or net realizable value with cost being determined using the first-in, first-out (FIFO) method. The Company maintains a reserve for inventory items to provide for an estimated amount of excess or obsolete inventory.
 
Activity related to the inventory reserve was as follows:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
          (In thousands)        
 
Balance at beginning of period
  $ 554     $ 485     $ 1,903  
Provision
    106       267       251  
Deduction(*)
    (219 )     (198 )     (1,669 )
                         
Balance at end of period
  $ 441     $ 554     $ 485  
                         
 
 
(*) Deductions related to inventory reserve accounts represent amounts written off against the reserve.


67


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
 
Property and Equipment
 
Property and equipment are recorded at cost and consist primarily of computer equipment, business applications software and machinery. Depreciation is computed using the straight-line method over the estimated useful lives as follows:
 
     
    Estimated
    Useful Life
 
Computer and research equipment
  3 years
Furniture
  5
Machinery
  2-5
Tooling
  2
Business applications software
  5
Capital leases and leasehold improvements
  Term of lease
 
Expenditures for additions, renewals and betterments of plant and equipment are capitalized. Expenditures for repairs and maintenance are charged to expense as incurred. As assets are retired or sold, the related cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is credited or charged to operations.
 
Impairment of Long-Lived Assets
 
The Company periodically evaluates the recoverability of long-lived assets whenever events and changes in circumstances indicate that the carrying amount of an asset may not be fully recoverable. When indicators of impairment are present, the carrying values of the assets are evaluated in relation to the operating performance and future undiscounted cash flows of the underlying business. The net book value of the underlying asset is adjusted to fair value if the sum of the expected discounted cash flows is less than book value. Fair values are based on estimates of market prices and assumptions concerning the amount and timing of estimated future cash flows and assumed discount rates, reflecting varying degrees of perceived risk. There were no impairment charges recorded during any of the periods presented.
 
Research and Development
 
Costs incurred in the research and development of the Company’s products are expensed as incurred.
 
Internal Use Software
 
The Company capitalizes costs associated with the development and implementation of software obtained for internal use in accordance with American Institute of Certified Public Accountants Statement of Position 98-1, Accounting for Costs of Computer Software Developed or Obtained for Internal Use (“SOP 98-1”). At December 29, 2007 and December 30, 2006, the Company had $4.8 million and $3.6 million respectively, of costs related to enterprise-wide software included in fixed assets. Capitalized costs are being amortized over the assets’ estimated useful lives. The Company has recorded $0.7 million, $0.6 million and $0.2 million of amortization expense for the years ended December 29, 2007, December 30, 2006 and December 31, 2005, respectively.
 
Concentration of Credit Risk and Significant Customers
 
The Company maintains its cash in bank deposit accounts at high quality financial institutions. The individual balances, at times, may exceed federally insured limits. At December 29, 2007 and December 30, 2006, the Company exceeded the insured limit by $25.3 million and $6.1 million, respectively.
 
Financial instruments which potentially expose the Company to concentrations of credit risk consist of accounts receivable. Management believes its credit policies are prudent and reflect normal industry terms and business risk. At December 29, 2007 and December 30, 2006, 15% and 12% respectively, of the Company’s accounts receivable were due from the federal government. At December 29, 2007 two additional customers


68


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
accounted for 13% and 12%, respectively, of the Company’s accounts receivable balance. At December 30, 2006, two additional customers each accounted for 17% of the Company’s account receivable balance. For the years ended December 29, 2007, December 30, 2006, and December 31, 2005 revenue from one customer, the federal government, represented 35%, 34% and 28% of total revenue, respectively.
 
Foreign Currency Forward Contracts
 
In late 2007, the Company entered into several foreign currency forward contracts to sell Canadian dollars for United States dollars. The Company’s objective in entering into these contracts was to reduce foreign currency exposure to appreciation or depreciation in the value of its Canadian dollar based accounts receivable balances by partially offsetting a portion of such exposure with gains or losses on the forward contracts.
 
The Company accounted for these financial derivatives in accordance with SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities, as amended. These foreign currency contracts did not qualify for hedge accounting under SFAS No. 133. Accordingly, the foreign currency forward contract was marked-to-market and recorded at fair value with unrealized gains and losses reported along with foreign currency gains or losses in the caption “other income (expense), net” on the Company’s consolidated statements of operations.
 
Stock-Based Compensation
 
Effective January 1, 2006, the Company adopted the provisions of SFAS No. 123(R), Share-Based Payment, which establishes accounting for equity instruments exchanged for employee services. Under the provisions of SFAS No. 123(R), share-based compensation cost is measured at the grant date, based on the calculated fair value of the award, and is recognized as an expense over the employee’s requisite service period (generally the vesting period of the equity grants). Prior to January 1, 2006, the Company accounted for share-based compensation to employees in accordance with Accounting Principles Board Opinion (“APB”) No. 25, Accounting for Stock Issued to Employees, and related interpretations. The Company also followed the disclosure requirements of SFAS No. 123, Accounting for Stock-Based Compensation, as amended by SFAS No. 148, Accounting for Stock-Based Compensation — Transition and Disclosure. The Company elected to adopt the modified prospective transition method as provided by SFAS No. 123(R) and, accordingly financial statement amounts for the prior periods presented in this Annual Report on Form 10-K have not been restated to reflect the fair value method of expensing share-based compensation.
 
In a review of its stock-based compensation accounting methodology performed during the second quarter of fiscal 2007, the Company determined that a cumulative adjustment of $0.5 million of incremental stock-based compensation expense, and a balance sheet reclassification of $0.8 million from deferred compensation to additional paid-in capital, were required due to a correction in the application of SFAS No. 123(R). Upon adoption of SFAS No. 123(R) on January 1, 2006, the Company incorrectly valued 259,700 stock options that were granted between the date that it filed its initial Form S-1 registration statement with the Securities and Exchange Commission on July 27, 2005 and the date it became a public company (November 8, 2005). The Company believes, in accordance with APB 28, paragraph 29, that this adjustment did not have a material impact to its full year results for 2007. In addition, management does not believe the adjustment is material to the amounts reported by the Company in previous periods. This cumulative adjustment is included in the gross profit and operating expenses for the fiscal year ended December 29, 2007.
 
Under SFAS No. 123(R), entities that become public companies after June 15, 2005 and used the minimum value method of measuring equity share options and similar instruments as a non-public company for either recognition or pro forma disclosure purposes under SFAS No. 123 must apply the provisions of SFAS No. 123(R) prospectively to new and/or modified awards after the adoption of SFAS No. 123(R). Companies should continue to account for any portion of awards outstanding at the date of initial application of SFAS No. 123(R) using the accounting principles originally applied to those awards — either the minimum value method under SFAS No. 123 or the provisions of APB No. 25 and its related interpretive guidance. Accordingly, the Company did not record any cumulative effect of a change in accounting principle associated with the adoption of SFAS No. 123(R).


69


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The Company has historically granted stock options at exercise prices that equaled the fair value of its common stock as estimated by its board of directors, with input from management, as of the date of grant. Because there was no public market for the Company’s common stock prior to its initial public offering on November 9, 2005, its board of directors determined the fair value of its common stock by considering a number of objective and subjective factors, including the Company’s operating and financial performance and corporate milestones, the prices at which it sold shares of convertible preferred stock, the superior rights and preferences of securities senior to its common stock at the time of each grant, and the risk and non-liquid nature of its common stock. The Company has not historically obtained contemporaneous valuations by an unrelated valuation specialist because, at the time of the issuances of stock options, the Company believed its estimates of the fair value of its common stock to be reasonable based on the foregoing factors.
 
In connection with the initial public offering, the Company retrospectively reassessed the fair value of its common stock for options granted during the period from July 1, 2004 to November 8, 2005. As a result of this reassessment, the Company determined that the estimated fair market value used in granting options for the period from July 1, 2004 to December 31, 2004 was reasonable and appropriate. Accordingly, no deferred compensation was recorded for these grants. For the period from January 1, 2005 through November 8, 2005, the Company determined that the estimated fair value of its common stock increased from $4.60 to $21.60 due to a number of factors such as, among other things, the likelihood of an initial public offering, its improving operating results and the achievement of other corporate milestones in 2005. Based upon this determination, the Company recorded deferred compensation of approximately $3.4 million in the twelve months ended December 31, 2005 under APB No. 25 relating to stock options with exercise prices below the retrospectively reassessed fair market value on the date of grant. The Company recognized associated stock-based compensation expense of $0.2 million, $0.7 million and $0.4 million for the fiscal years ended December 29, 2007, December 30, 2006 and December 31, 2005, respectively. As of December 29, 2007, the deferred stock-based compensation balance associated with these grants was $0.7 million. The Company will continue to recognize the associated stock-based compensation expense, in accordance with the provisions of APB No. 25, related to these shares of $0.3 million, $0.3 million and $0.1 million for 2008, 2009 and 2010, respectively.
 
Under the provisions of SFAS No. 123(R), the Company recognized $4.5 million of stock-based compensation expense during the fiscal year ended December 29, 2007 for stock options granted subsequent to the Company’s initial filing of its Form S-1 with the SEC. The unamortized fair value as of December 29, 2007 associated with these grants was $15.8 million with a weighted average remaining recognition period of 2.68 years.
 
The fair value of each option grant for the fiscal years ended December 29, 2007 and December 30, 2006 was computed on the grant date using the Black-Scholes option-pricing model with the following assumptions:
 
         
    Fiscal Year Ended
  Fiscal Year Ended
    December 29, 2007   December 30, 2006
 
Risk-free interest rate
  3.23% — 4.90%   4.32% — 5.11%
Expected dividend yield
   
Expected life
  3.50 — 4.75 years   3.5 — 6.5 years
Expected volatility
  50% — 55%   65%
 
The risk-free interest rate is derived from the average U.S. Treasury constant maturity rate, which approximates the rate in effect at the time of grant, commensurate with the expected life of the instrument. The dividend yield is zero based upon the fact the Company has never paid and has no present intention to pay cash dividends. The expected term calculation is based upon the simplified method provided under SEC Staff Accounting Bulletin (“SAB”) No. 107. Under SAB No. 107, the expected term is developed by averaging the contractual term of the stock option grants (7 or 10 years) with the associated vesting term (typically 4 to 5 years). Given the Company’s initial public offering in November 2005 and the resulting short history as a public company, the Company could not rely solely on company specific historical data for purposes of establishing expected volatility. Consequently, the


70


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Company performed an analysis that included company specific historical data combined with data of several peer companies with similar expected option lives to develop an expected volatility assumption.
 
Based upon the above assumptions, the weighted average fair value of each stock option granted for the fiscal year ended December 29, 2007 was $8.64.
 
The Company has assumed a forfeiture rate of 5% for all stock options granted subsequent to the Company’s initial filing of its Form S-1 with the SEC with the exception of those issued to executives and directors for which forfeiture rates of 0% and 2.5% were assumed for fiscal years 2006 and 2007, respectively. In the future, the Company will record incremental stock-based compensation expense if the actual forfeiture rates are lower than estimated and will record a recovery of prior stock-based compensation expense if the actual forfeitures are higher than estimated.
 
The Company had previously adopted the provisions of SFAS No. 123, Accounting for Stock-Based Compensation, as amended by SFAS No. 148, Accounting for Stock-Based Compensation — Transition and Disclosure through disclosure only. The following table illustrates the effects on net income and earnings per share for the fiscal year ended December 31, 2005 as if the Company had applied the fair value recognition provisions of SFAS No. 123 to share-based employee awards.
 
         
    Fiscal Year Ended
 
    December 31,
 
    2005  
    (In thousands except
 
    per share data)  
 
Net income as reported
  $ 2,610  
Add back:
       
Stock-based employee compensation expense reported in net income
    598  
Less: Stock-based employee compensation expense determined under fair-value method for all awards
    (808 )
         
Pro forma net income
  $ 2,400  
         
Pro forma net income attributable to common stockholders
  $ 1,428  
         
Net income per share, as reported
       
Basic
  $ 0.13  
Diluted
  $ 0.11  
Pro forma net income per share
       
Basic
  $ 0.12  
Diluted
  $ 0.10  
Number of shares used in per share calculations
       
Basic
    12,007  
Diluted
    14,331  
 
The fair value of each option grant for the fiscal year 2005 was estimated on the grant date using the Black-Scholes option pricing model with the following assumptions:
 
         
    Fiscal Year Ended
 
    December 31,
 
    2005  
 
Risk-free interest rate
    4.1 %
Expected dividend yield
     
Expected life
    5 years  
Expected volatility
    65 %


71


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The weighted average fair value of options granted during 2005 prior to and subsequent to the filing of its initial Form S-1 registration statement with the SEC on July 27, 2005, was calculated using 0% and 65% volatility, respectively. Until the Company went public the use of the minimum value methodology was acceptable under SFAS No. 123.
 
Based upon the above assumptions, the weighted average fair value of each stock option granted for fiscal year 2005 was $4.402.
 
The table below summarizes stock option plan activity:
 
                                 
                Weighted Average
    Aggregate
 
    Number of
    Weighted Average
    Remaining
    Intrinsic
 
    Shares     Exercise Price     Contractual Term     Value(1)  
 
Outstanding at December 31, 2004
    2,605,000     $ 1.77                  
Granted
    1,172,475       10.81                  
Exercised
    (442,204 )     1.43                  
Canceled
    (63,787 )     4.54                  
                                 
Outstanding at December 31, 2005
    3,271,484     $ 1.27                  
Granted
    700,245       21.82                  
Exercised
    (384,827 )     2.72                  
Canceled
    (87,192 )     16.18                  
                                 
Outstanding at December 30, 2006
    3,499,710     $ 8.34                  
Granted
    812,778       17.33                  
Exercised
    (793,283 )     1.75                  
Canceled
    (273,117 )     7.29                  
                                 
Outstanding at December 29, 2007
    3,246,088     $ 12.29       6.35 years     $ 22.8 million  
                                 
Vested and expected to vest at December 29, 2007
    2,996,037     $ 12.20       6.32 years     $ 21.3 million  
Exercisable as of December 29, 2007
    1,192,483     $ 8.21       5.94 years     $ 13.1 million  
Weighted average fair value of options granted during the fiscal year ended December 29, 2007
          $ 8.64                  
Options available for future grant at December 29, 2007
    1,170,440                          
 
 
(1) The aggregate intrinsic value on the table was calculated based upon the positive difference between the closing market value of the Company’s stock on December 29, 2007 of $18.04 and the exercise price of the underlying option.
 
During fiscal years 2007, 2006 and 2005, the total intrinsic value of stock options exercised was $11.7 million, $7.0 million and $5.7 million, respectively. No amounts relating to stock-based compensation have been capitalized.


72


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The table below summarizes activity relating to restricted stock awards:
 
                 
    Number of
    Weighted Average
 
    Shares Underlying
    Grant Date Fair
 
    Restricted Stock     Value  
 
Outstanding at December 31, 2004
    297,724     $ 1.80  
Granted
           
Vested
    (124,363 )   $ 1.61  
Forfeited
           
                 
Outstanding at December 31, 2005
    173,361     $ 1.94  
Granted
           
Vested
    (124,362 )   $ 1.61  
Forfeited
           
                 
Outstanding at December 30, 2006
    48,999     $ 2.77  
Granted
    25,332       16.03  
Vested
    (24,500 )     2.77  
Forfeited
    (4,047 )     2.77  
                 
Outstanding at December 29, 2007
    45,784     $ 10.11  
                 
 
As of December 29, 2007, the unamortized fair value of all restricted stock awards was $363,000. The Company expects to recognize associated stock-based compensation expense of $110,000, $100,000, $104,000 and $49,000 in 2008, 2009, 2010 and 2011, respectively.
 
The following table summarizes information about stock options outstanding at December 29, 2007:
 
                                         
          Options Outstanding
                   
          Weighted Average
          Options Exercisable  
    Number
    Remaining
    Weighted Average
    Number
    Weighted Average
 
Range of Exercise Prices
  Outstanding     Contractual Life     Exercise Price     Exercisable     Exercise Price  
 
$ 0.24 - $ 2.33
    523,938       4.97  years   $ 1.74       479,063     $ 1.69  
  2.78 -  2.78
    362,775       6.54       2.78       168,925       2.78  
  4.60 -  4.60
    126,870       6.95       4.60       47,255       4.60  
  4.96 -  4.96
    356,315       7.16       4.96       123,770       4.96  
  5.66 - 15.84
    183,775       7.27       12.28       48,680       11.75  
 16.03 - 16.03
    395,832       6.38       16.03              
 16.16 - 17.77
    359,125       6.32       16.76       102,972       16.85  
 18.04 - 20.06
    353,913       6.40       19.07       15,431       19.40  
 21.60 - 24.00
    400,975       6.92       22.81       134,327       22.98  
 24.88 - 34.98
    182,570       5.63       27.97       72,060       27.58  
                                         
$ 0.24 - $34.98
    3,246,088       6.35  years   $ 12.29       1,192,483     $ 8.21  
                                         
 
The table below summarizes activity relating to restricted stock units:
 
                 
    Number of
    Weighted Average
 
    Shares Underlying
    Grant Date Fair
 
    Restricted Stock     Value  
 
Outstanding at December 30, 2006
        $  
Granted
    24,780       19.05  
Vested
           
Forfeited
    (333 )     18.74  
                 
Outstanding at December 29, 2007
    24,447     $ 19.05  
                 


73


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
As of December 29, 2007, the unamortized fair value of all restricted stock units was $429,000. The Company expects to recognize associated stock-based compensation expense of $106,000, $113,000, $123,000 and $87,000 in 2008, 2009, 2010 and 2011, respectively.
 
Advertising Expense
 
The Company expenses advertising costs as they are incurred. During the years ended December 29, 2007, December 30, 2006 and December 31, 2005 advertising expense totaled $15.9 million, $14.3 million and $10.5 million, respectively.
 
Income Taxes
 
In June 2006, the FASB issued FASB Interpretation No. (“FIN”) 48, Accounting for Uncertainty in Income Taxes — An Interpretation of FASB Statement No. 109, which prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. FIN 48 is effective for fiscal years beginning after December 15, 2006. Accordingly, the Company adopted FIN 48 beginning December 31, 2006 and the impact of adoption on its opening balance of retained earnings was zero. As of the beginning of fiscal year 2007, the Company had no material unrecognized tax benefits and no material unrecognized tax benefits were recorded in the fiscal year ended December 29, 2007. The Company recognizes interest and penalties related to unrecognized tax benefits in its tax provision and there were no accrued interest or penalties as of December 29, 2007, December 30, 2006 or December 31, 2005.
 
The Company is subject to taxation in the United States and various states and foreign jurisdictions. The statute of limitations for assessment by the IRS and state tax authorities is closed for fiscal years prior to December 31, 2004, although carryforward attributes that were generated prior to fiscal year 2004 may still be adjusted upon examination by the IRS or state tax authorities if they either have been or will be used in a future period. There are currently no federal or state audits in progress.
 
Deferred taxes are determined based on the difference between the financial statement and tax basis of assets and liabilities using enacted tax rates in effect in the years in which the differences are expected to reverse. Valuation allowances are provided if based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
 
The Company monitors the realization of its deferred tax assets based on changes in circumstances, for example recurring periods of income for tax purposes following historical periods of cumulative losses or changes in tax laws or regulations. The Company’s income tax provisions and its assessment of the realizability of its deferred tax assets involve significant judgments and estimates.
 
In fiscal 2007, the Company completed an analysis of historical and projected future profitability which resulted in the full release of the valuation allowance relating to federal deferred tax assets. The Company continues to maintain a valuation allowance against state deferred tax assets due to less certainty of their realizability given the shorter expiration period associated with these state deferred tax assets and the generation of state tax credits in excess of the state tax liability. At December 29, 2007, the Company has total deferred tax assets of $12.9 million and a valuation allowance of $2.7 million resulting in a net deferred tax asset of $10.2 million.
 
Comprehensive Income (Loss)
 
SFAS No. 130, Reporting Comprehensive Income, establishes standards for the reporting and display of comprehensive income (loss) and its components in financial statements. The Company’s comprehensive income (loss) is equal to the Company’s net income (loss) for all periods presented.


74


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Recent Accounting Pronouncements
 
In September 2006, the Financial Accounting Standards Board (“FASB”) issued SFAS No. 157, Fair Value Measurements which defines fair value, establishes guidelines for measuring fair value and expands disclosures regarding fair value measurements. SFAS 157 does not require any new fair value measurements but rather eliminates inconsistencies in guidance found in various prior accounting pronouncements. SFAS 157 is effective for fiscal years beginning after November 15, 2007. However, on February 12, 2008, the FASB issued FSP FAS 157-2 which delays the effective date of SFAS 157 for all nonfinancial assets and nonfinancial liabilities, except those that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually). This FSP partially defers the effective date of Statement 157 to fiscal years beginning after November 15, 2008, and interim periods within those fiscal years for items within the scope of this FSP. Effective for fiscal 2008, the company will adopt SFAS 157 except as it applies to those nonfinancial assets and nonfinancial liabilities as noted in FSP FAS 157-2. The partial adoption of SFAS 157 is not expected to have a material impact on the Company’s results of operations or financial condition.
 
In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial Liabilities — Including an Amendment of FASB Statement No. 115 (“SFAS 159”). SFAS 159 permits entities to choose fair value measurement for many financial instruments and certain other items as of specified election dates. Business entities will thereafter report in earnings the unrealized gains and losses on items for which the fair value option has been chosen. The fair value option may be applied instrument by instrument, may not be applied to portions of instruments and is irrevocable unless a new election date occurs. SFAS 159 is effective for an entity’s first fiscal year beginning after November 15, 2007. The Company is currently evaluating the potential impact of adoption of SFAS 159 and has not yet determined the impact, if any, that its adoption will have on its results of operations or financial condition.
 
In December 2007, the FASB issued SFAS No. 141 (revised 2007) (“SFAS 141R”), Business Combinations and SFAS No. 160 (“SFAS 160”), Noncontrolling Interests in Consolidated Financial Statements, an amendment of Accounting Research Bulletin No. 51. SFAS 141R will change how business acquisitions are accounted for and will impact financial statements both on the acquisition date and in subsequent periods. SFAS 160 will change the accounting and reporting for minority interests, which will be recharacterized as noncontrolling interests and classified as a component of equity. The provisions of SFAS 141R and SFAS 160 are effective for fiscal years beginning on or after December 15, 2008. The Company is currently evaluating the impact that SFAS 141R and SFAS 160 will have on its results of operations or financial condition.
 
From time to time, new accounting pronouncements are issued by FASB that are adopted by the Company as of the specified effective date. Unless otherwise discussed, the Company believes that the impact of recently issued standards, which are not yet effective, will not have a material impact on the Company’s consolidated financial statements upon adoption.
 
3.   Inventory
 
Inventory consists of the following at:
 
                 
    December 29,
    December 30,
 
    2007     2006  
    (In thousands)  
 
Raw materials
  $ 1,641     $ 1,248  
Work in process
    517       311  
Finished goods
    43,064       19,331  
                 
    $ 45,222     $ 20,890  
                 


75


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
4.   Property and Equipment
 
Property and equipment consists of the following at:
 
                 
    December 29,
    December 30,
 
    2007     2006  
    (In thousands)  
 
Computer and equipment
  $ 10,406     $ 6,392  
Furniture
    577       536  
Machinery
    1,418       1,257  
Tooling
    5,977       4,445  
Leasehold improvements
    3,744       1,331  
Software purchased for internal use
    4,834       3,563  
                 
      26,956       17,524  
Less: accumulated depreciation and amortization
    11,262       6,823  
                 
    $ 15,694     $ 10,701  
                 
 
Depreciation and amortization expense for the years ended December 29, 2007, December 30, 2006 and December 31, 2005 was $5.3 million, $3.7 million, and $2.1 million, respectively. Accumulated amortization on leased equipment was $0.1 million at December 31, 2005.
 
5.   Other Assets
 
In November 2007, the Company recorded an investment of $2.5 million in a series of preferred stock of Advanced Scientific Concepts, Inc. This investment is accounted for at cost utilizing the cost method. On a going forward basis, the Company will regularly monitor this investment to determine if facts and circumstances have changed in a manner that would require a change in accounting methodology. Additionally, the Company will regularly evaluate whether or not this investment has been impaired by considering such factors as economic environment, market conditions, operational performance and other specific factors relating to the business underlying the investment. If any such impairment is identified, a reduction in the carrying value of the investment would be recorded at that time.
 
6.   Accrued Expenses
 
Accrued expenses consist of the following at:
 
                 
    December 29,
    December 30,
 
    2007     2006  
    (In thousands)  
 
Accrued warranty
  $ 2,491     $ 2,462  
Accrued direct fulfillment costs
    1,953       2,123  
Accrued rent
    197       284  
Accrued sales commissions
    1,074       502  
Accrued accounting fees
    361       332  
Accrued income taxes
    32       168  
Accrued other
    1,879       1,149  
                 
    $ 7,987     $ 7,020  
                 


76


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
7.   Revolving Line of Credit
 
On May 26, 2005, the Company obtained a working capital line of credit with a bank under which the Company can borrow up to $20.0 million, including a $2.0 million sub-limit for equipment financing. Interest accrues at a variable rate based on prime or published LIBOR rates. The line expired on May 26, 2007.
 
On June 5, 2007, the Company entered into a $35 million unsecured revolving credit facility with Bank of America, N.A. to replace its expired working capital line of credit with Bank of America. The credit facility will be available to fund working capital and other corporate purposes. The interest on loans under its working capital line of credit will accrue, at the Company’s election, at either (i) Bank of America’s prime rate minus 1% or (ii) the Eurodollar rate plus 1.25%. The credit facility will terminate and all amounts outstanding thereunder will be due and payable in full on June 5, 2010. As of December 29, 2007, the Company had letters of credit outstanding of $2.1 million and $32.9 million available under its working capital line of credit. This credit facility contains customary terms and conditions for credit facilities of this type, including restrictions on its ability to incur or guaranty additional indebtedness, create liens, enter into transactions with affiliates, make loans or investments, sell assets, pay dividends or make distributions on, or repurchase, our stock, and consolidate or merge with other entities.
 
In addition, the Company is required to meet certain financial covenants customary with this type of agreement, including maintaining a minimum specified tangible net worth, a minimum specified ratio of current assets to current liabilities and a minimum specified annual net income.
 
This credit facility contains customary events of default, including for payment defaults, breaches of representations, breaches of affirmative or negative covenants, cross defaults to other material indebtedness, bankruptcy and failure to discharge certain judgments. If a default occurs and is not cured within any applicable cure period or is not waived, the Company’s obligations under the credit facility may be accelerated. At December 29, 2007, the Company was in compliance with all covenants under the credit facility.
 
8.   Common Stock
 
Common stockholders are entitled to one vote for each share held and to receive dividends if and when declared by the Board of Directors and subject to and qualified by the rights of holders of the preferred stock. Upon dissolution or liquidation of the Company, holders of common stock will be entitled to receive all available assets subject to any preferential rights of any then outstanding preferred stock.
 
9.   Note Receivable from Stockholder
 
In May 1999, the Company issued a note receivable to a consultant for the purchase of 200,000 common shares at $0.24 per share. The note accrued interest on June 30 and December 31 at 8% per annum. Interest was payable semiannually in arrears on June 30 and December 31 of each year, and the principal was payable in full on the earlier of May 15, 2005, or immediately prior to an initial public offering. At December 31, 2004 the remaining note receivable balance was $43,000 and was included as a reduction of stockholders’ equity. This remaining balance was paid in full in 2005.
 
10.   Stock Option Plan
 
Under the Company’s 1994 Stock Option Plan (the “1994 Plan”), as amended, 8,785,465 shares of the Company’s common stock were reserved for issuance to directors, officers, employees and consultants of the Company. Options may be designated and granted as either “Incentive Stock Options” or “Nonstatutory” Stock Options. Eligibility for Incentive Stock Options (“ISOs”) is limited to those individuals whose employment status would qualify them for the tax treatment associated with ISOs in accordance with the Internal Revenue Code. The 1994 Plan expired November 16, 2004.
 
In October 2001, the Company adopted the 2001 Special Stock Option Plan (the “2001 Plan”). Under the 2001 Plan, the Board authorized the issuance of options to purchase 642,310 shares of previously authorized common


77


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
stock under modified vesting requirements. The 2001 Plan is administered by a Committee of the Board of Directors. Options granted to employees under the 2001 Plan may be designated as ISOs or Nonstatutory Stock Options. In 2004 and 2003, there were 571,405 and 40,000 options granted, respectively, under the 2001 Plan.
 
During 2004, the Company issued 25,899 and 371,685 restricted shares of common stock under the 1994 Plan and 2001 Plan, respectively, all of which were outstanding at December 31, 2004. Deferred compensation of $0.7 million was recorded in association with the issuance of these restricted shares, of which $0.1 million, $0.1 million, $0.2 million and $0.3 million was expensed in fiscal years, 2007, 2006, 2005 and 2004, respectively. The remaining balance of $14,000 will be expensed in 2008. Upon termination of the stockholder’s business relationship with the Company, per the terms of the restricted stock agreements, the Company 1) shall purchase all unvested shares from the stockholder at the price paid for them and 2) may purchase all but not less than all of the stockholder’s vested shares at the greater of i) the price paid for them and ii) the product of the Fair Market Value (as defined in the 2001 Plan) at the time of repurchase and the number of vested shares to be repurchased.
 
Immediately upon expiration of the 1994 Plan, the Company adopted the 2004 Stock Option and Incentive Plan (the “2004 Plan”). Under the 2004 Plan, 1,189,423 shares of the Company’s common stock were reserved for issuance to directors, officers, employees and consultants of the Company. In addition, stock options returned to the 1994 Plan, in accordance therewith, after November 16, 2004, as a result of the expiration, cancellation or termination, are automatically made available for issuance under the 2004 Plan. The aggregate number of shares that may be issued pursuant to the 2004 Plan shall not exceed 3,695,223 shares. Options may be designated and granted as either “Incentive Stock Options” or “Nonstatutory” Stock Options. Eligibility for ISOs is limited to those individuals whose employment status would qualify them for the tax treatment associated with ISOs in accordance with the Internal Revenue Code.
 
Effective October 10, 2005, the Company terminated the 2004 Plan and adopted the 2005 Stock Option and Incentive Plan (the “2005 Plan”). Under the 2005 Plan, 1,583,682 shares were reserved for issuance in the form of incentive stock options, non-qualified stock options, stock appreciation rights, deferred stock awards and restricted stock awards. Additionally, the 2005 Plan provides that the number of shares reserved and available for issuance under the plan will automatically increase each January 1, beginning in 2007, by 4.5% of the outstanding number of shares of common stock on the immediately preceding December 31. Stock options returned to the 1994 Plan, 2001 Plan, 2004 Plan and 2005 Plan, as a result of their expiration, cancellation or termination, are automatically made available for issuance under the 2005 Plan. Eligibility for incentive stock options is limited to those individuals whose employment status would qualify them for the tax treatment associated with incentive stock options in accordance with the Internal Revenue Code. As of December 39, 2007, there were 1,170,440 shares available for future grant under the 2005 Plan.
 
Options granted under the 1994 Stock Option Plan, the 2001 Plan, the 2004 Plan and the 2005 Plan (the “Plans”) are subject to terms and conditions as determined by the Compensation Committee of the Board of Directors, including vesting periods. Options granted under the Plans are exercisable in full at any time subsequent to vesting, generally vest over periods from 0 to 5 years, and expire 7 or 10 years from the date of grant or, if earlier, 60 or 90 days from employee termination. The exercise price for each ISO grant is determined by the Board of Directors of the Company to be equal to the fair value of the common stock on the date of grant. In reaching this determination at the time of each such grant, the Board considers a broad range of factors, including the illiquid nature of an investment in the Company’s common stock, the Company’s historical financial performance, the Company’s future prospects and the value of preferred stock based on recent financing activities. Subsequent to the Company’s initial public offering, the exercise price of stock options granted is equal to the closing price on the NASDAQ Global Market on the date of grant. The exercise price of nonstatutory options may be set at a price other than the fair market value of the common stock.
 
Effective January 1, 2006, the Company adopted the provisions of SFAS No. 123(R), in accounting for stock options used subsequent to this date. Prior to January 1, 2006, the Company utilized the provisions of APB No. 25 and related interpretations in accounting for options granted.


78


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
11.   Warrants
 
Under the terms of the January 30, 2003 Credit Agreement with a bank (Note 6), the Company issued warrants to the bank to purchase 18,000 shares of common stock at an approximate exercise price of $3.74 per share. The warrants were subject to certain adjustments and could be exercised at any time until January 29, 2010. The estimated fair value of the warrants of $22,312 was determined using the Black-Scholes option-pricing model. For this purpose, the Company assumed a risk-free rate of return of 3.12%; an expected life of 2 years; 100% volatility and no dividends. The Company recorded the estimated fair value of the warrants as additional paid-in-capital and other assets and amortized the fair value to interest expense over the eleven months outstanding under the Credit Agreement in 2003.
 
On November 14, 2005 the bank exercised its warrants and consistent with the conversion rights contained in the warrant agreement, the Company issued 16,155 shares of common stock.
 
12.   Income Taxes
 
The components of income tax expense were as follows:
 
                         
    2007     2006     2005  
    (In thousands)  
 
Current
                       
Federal
  $ 1,450     $ 169     $ 129  
State
    187       135       47  
Foreign
    3              
                         
Total current tax provision
    1,640       304       176  
Deferred
                       
Federal
    (10,198 )            
                         
Total income tax provision (benefit)
  $ (8,558 )   $ 304     $ 176  
                         
 
The components of net deferred tax assets are as follows at December 29, 2007 and December 30, 2006:
 
                 
    2007     2006  
    (In thousands)  
 
Net deferred tax assets
               
Current net deferred tax assets
               
Reserves and accruals
  $ 6,789     $ 5,954  
Valuation allowance
    (884 )     (5,954 )
                 
Total current net deferred tax assets
    5,905        
                 
Non-current net deferred tax assets
               
Net operating loss carryforwards
          287  
Capital loss carryforwards
    99       99  
Tax credits
    2,913       3,212  
Fixed assets
    1,129       631  
Stock based compensation
    1,948       630  
Valuation allowance
    (1,796 )     (4,859 )
                 
Total non-current net deferred tax assets
    4,293        
                 
Total net deferred tax assets
  $ 10,198     $  
                 


79


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The net change in valuation allowance from the prior year is primarily due to the realization in 2007 that the deferred tax assets related to certain temporary differences will more likely than not be realized based on future projections of taxable income. The valuation allowance as of December 29, 2007 relates to all state deferred tax assets, including state credits, and state net operating losses.
 
At December 29, 2007, the Company had available net operating loss carryforwards for federal and state purposes of $8.6 million and $3.1 million respectively. All of the federal and state net operating loss carryforwards relate to deductions from stock option compensation for which the associated tax benefit will be credited to additional paid in capital when realized. The federal net operating loss carryforwards expire at various dates from 2022 through 2026. The state net operating loss carryforwards will begin to expire in the current year. The Company also had available research and development credits carryforwards to offset future federal and state taxes of $1.4 million and $1.8 million respectively, which expire at various dates from 2012 to 2027, and investment tax credit carryforwards to offset future state taxes of $0.2 million, which expire from 2011 to 2012. Under the Internal Revenue Service Code, certain substantial changes in the Company’s ownership could result in an annual limitation on the amount of net operating losses and tax credit carryforwards which can be utilized in future years.
 
The reconciliation of the expected tax (benefit) expense (computed by applying the federal statutory rate to income before income taxes) to actual tax expense was as follows:
 
                         
    2007     2006     2005  
    (In thousands)  
 
Expected federal income tax
  $ 171     $ 1,315     $ 947  
Permanent items
    91       38       26  
State taxes
    301       (236 )     133  
Credits
    (1,148 )     (742 )     (166 )
Non deductible stock compensation
    276       234        
Other
    (115 )     6       36  
Increase (decrease) in valuation allowance
    (8,134 )     (311 )     (800 )
                         
    $ (8,558 )   $ 304     $ 176  
                         
 
As disclosed in Note 2, the Company adopted the provisions of FIN 48 as of December 31, 2006. At December 29, 2007, the Company had no material unrecognized tax benefits. Additionally, there were no accrued interest or penalties as of December 29, 2007, December 30, 2006 or December 31, 2005.
 
13.   Commitments and Contingencies
 
Legal
 
The Company received a letter from the United Kingdom’s Ministry of Defence (the “Customer”) dated February 9, 2004, attempting to terminate a contract for the design, development, production and support of a number of man-portable remote control vehicles for use in explosive ordnance disposal operations. The Company entered into the contract with the Customer on May 23, 2001, and substantially completed the product design and development phase of the work. The Company received payments based upon achieving a number of contract milestones and has recognized revenue based on progress under the percentage-of-completion method of accounting. In addition to the milestone payments, the Customer advanced the Company funds to purchase long-lead inventory components in advance of the production contemplated in the contract. On July 27, 2006, the Company signed an agreement with the United Kingdom’s Ministry of Defence (MoD) Defence Procurement Agency (DPA) to supply 30 iRobot PackBot EOD robots, spare parts and support in exchange for the payments received by the Company under the contract. At December 30, 2006, all obligations, with the exception of normal warranty and support, resulting from the signing of this agreement had been satisfied.


80


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
On August 17, 2007, the Company filed a lawsuit in Massachusetts Superior Court against Robotic FX, Inc. and Jameel Ahed alleging, among other things, misappropriation of trade secrets and breach of contract, and seeking both injunctive and monetary relief. The case was subsequently removed to the United States District Court for the District of Massachusetts. On November 2, 2007, the court issued a preliminary injunction, and on December 21, 2007 issued a permanent injunction, against Robotic FX, Inc. and Mr. Ahed preventing the sale of products using certain of our trade secrets, including the Robotic FX Negotiator product.
 
In addition, on August 17, 2007, the Company filed a lawsuit in the United States District Court for the Northern District of Alabama against Robotic FX, Inc. alleging willful infringement of two patents owned by the Company, and seeking both injunctive and monetary relief. On December 21, 2007, the court entered a judgment that Robotic FX, Inc. knowingly infringed on both asserted patents.
 
In a related settlement, Robotic FX, Inc. will be dissolved and certain residual assets retained by the Company at its election. Mr. Ahed is prohibited from participating in competitive activities in the robotics industry for five years.
 
The cumulative litigation and settlement-related expenditures associated with this dispute are expected to total approximately $3.0 million, including an obligation to make cash payments up to $0.7 million through 2012, contingent upon Mr. Ahed and Robotic FX, Inc. continuing to meet obligations pursuant to various agreements, including but not limited to certain non-competition provisions. These contingent payments will be expensed, when and if earned.
 
Lease Obligations
 
The Company leases its facilities. Rental expense under operating leases for 2007, 2006 and 2005 amounted to $2.1 million, $2.1 million, and $1.3 million, respectively. Future minimum rental payments under operating leases were as follows as of December 29, 2007:
 
         
    Operating
 
    Leases  
 
2008
  $ 3,295  
2009
    2,337  
2010
    2,226  
2011
    2,210  
2012
    2,162  
Thereafter
    15,333  
         
Total minimum lease payments
  $ 27,563  
         
 
Guarantees and Indemnification Obligations
 
The Company enters into standard indemnification agreements in the ordinary course of business. Pursuant to these agreements, the Company indemnifies and agrees to reimburse the indemnified party for losses incurred by the indemnified party, generally the Company’s customers, in connection with any patent, copyright, trade secret or other proprietary right infringement claim by any third party with respect to the Company’s software. The term of these indemnification agreements is generally perpetual any time after execution of the agreement. The maximum potential amount of future payments the Company could be required to make under these indemnification agreements is unlimited. The Company has never incurred costs to defend lawsuits or settle claims related to these indemnification agreements. As a result, the Company believes the estimated fair value of these agreements is minimal. Accordingly, the Company has no liabilities recorded for these agreements as of December 29, 2007 and December 30, 2006, respectively.


81


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Warranty
 
The Company provides warranties on most products and has established a reserve for warranty based on identified warranty costs. The reserve is included as part of accrued expenses (Note 5) in the accompanying balance sheets.
 
Activity related to the warranty accrual was as follows:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December 31,
 
    2007     2006     2005  
    (In thousands)  
 
Balance at beginning of period
  $ 2,462     $ 2,031     $ 1,398  
Provision
    6,649       5,971       4,133  
Warranty usage(*)
    (6,620 )     (5,540 )     (3,500 )
                         
Balance at end of period
  $ 2,491     $ 2,462     $ 2,031  
                         
 
 
(*) Warranty usage includes the pro rata expiration of product warranties unutilized.
 
Sales Taxes
 
The Company collects and remits sales tax in jurisdictions in which we have a physical presence or in which we believe nexus exists, which obligates us to collect and remit sales tax. The Company is not currently aware of any asserted claims for sales tax liabilities for prior taxable periods, and no jurisdiction has audited or indicated any intention of auditing sales and use tax compliance.
 
The Company has conducted an evaluation of whether it has established nexus in various jurisdictions with respect to sales and use taxes. As a result of this evaluation, the Company recorded a liability for potential exposure in one jurisdiction. In an effort to mitigate its potential liability, the Company intends to approach this state pursuant to voluntary disclosure arrangements. The Company continues to analyze possible sales tax exposure, but does not currently believe that any individual claim or aggregate claims that might arise will ultimately have a material effect on its consolidated results of operations, financial position or cash flows.
 
14.   Employee Benefits
 
The Company sponsors a retirement plan under Section 401(k) of the Internal Revenue Code (the “Retirement Plan”). All Company employees, with the exception of temporary and contract employees are eligible to participate in the Retirement Plan after satisfying age and length of service requirements prescribed by the plan. Under the Retirement Plan, employees may make tax-deferred contributions, and the Company, at its sole discretion, and subject to the limits prescribed by the IRS, may make either a nonelective contribution on behalf of all eligible employees or a matching contribution on behalf of all plan participants.
 
The Company elected to make a matching contribution of approximately $0.8 million, $0.7 million and $0.5 million for the plan years ended December 29, 2007, December 30, 2006 and December 31, 2005 (“Plan-Year 2007,” “Plan-Year 2006” and “Plan-Year 2005”), respectively. The employer contribution represents a matching contribution at a rate of 50% of each employee’s first six percent contribution. Accordingly, each employee participating during Plan-Year 2007, Plan-Year 2006 and Plan-Year 2005 is entitled up to a maximum of three percent of his or her eligible annual payroll. The employer matching contribution for Plan-Year 2007 is included in accrued compensation.


82


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
15.   Industry Segment, Geographic Information and Significant Customers
 
The Company operates in two reportable segments, the consumer business and government and industrial business. The nature of products and types of customers for the two segments vary significantly. As such, the segments are managed separately.
 
Home Robots
 
The Company’s consumer business offers products through a network of retail businesses throughout the U.S. and to certain countries through international distributors. The Company’s consumer segment includes mobile robots used in the maintenance of domestic households sold primarily to retail outlets.
 
Government and Industrial
 
The Company’s government and industrial division offers products through a small U.S. government-focused sales force, while products are sold to a limited number of countries other than the United States through international distribution. The Company’s government and industrial products are robots used by various U.S. and foreign governments, primarily for reconnaissance and bomb disposal missions.
 
The table below presents segment information about revenue, cost of revenue, gross profit and income (loss) before income taxes:
 
                         
    Fiscal Year Ended  
    December 29,
    December 30,
    December, 31
 
    2007     2006     2005  
    (In thousands)  
 
Revenue:
                       
Home Robots
  $ 144,483     $ 112,430     $ 93,955  
Government & Industrial
    104,598       76,525       47,945  
Other
                68  
                         
Total revenue
    249,081       188,955       141,968  
                         
Cost of revenue:
                       
Home Robots
    97,878       68,066       58,025  
Government & Industrial
    68,616       51,189       36,279  
Other
          (35 )     85  
                         
Total cost of revenue
    166,494       119,220       94,389  
                         
Gross profit (loss):
                       
Home Robots
    46,605       44,364       35,930  
Government & Industrial
    35,982       25,336       11,666  
Other
          35       (17 )
                         
Total gross profit
    82,587       69,735       47,579  
                         
Research and development
                       
Other
    17,082       17,025       11,601  
Selling and marketing
                       
Other
    44,894       33,969       21,796  
General and administrative
                       
Other
    20,919       18,703       12,072  
Litigation and related expenses
                       
Other
    2,341              
Other income (expense), net
                       
Other
    3,151       3,831       676  
Income (loss) before income taxes
                       
Other
  $ 502     $ 3,869     $ 2,786  
                         


83


Table of Contents

 
iROBOT CORPORATION
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Geographic Information
 
For the fiscal years ended December 29, 2007 and December 30, 2006, sales to non-U.S. customers accounted for 13.1% and 11.0% of total revenue, respectively. For the year ended December 29, 2007, no one country accounted for more than 10% of total revenue.
 
Significant Customers
 
For the fiscal years ended December 29, 2007 and December 30, 2006, U.S. federal government orders, contracts and subcontracts accounted for 34.9% and 34.4% of total revenue, respectively.
 
16.   Quarterly Information (Unaudited)
 
                                                                 
    Fiscal Quarter Ended  
    April 1,
    July 1,
    September 30,
    December 30,
    March 31,
    June 30,
    September 29,
    December 29,
 
    2006     2006     2006     2006     2007     2007     2007     2007  
    (In thousands, except per share amounts)  
 
Revenue
  $ 38,209     $ 34,561     $ 55,047     $ 61,138     $ 39,487     $ 47,014     $ 63,840     $ 98,740  
Gross profit
    12,193       11,777       22,983       22,782       11,117       15,224       20,112       36,134  
Net income (loss)
    (2,917 )     (1,777 )     10,042       (1,783 )     (5,501 )     (4,776 )     (1,378 )     20,715  
Diluted earnings (loss) per share
  $ (0.12 )   $ (0.08 )   $ 0.39     $ (0.08 )   $ (0.23 )   $ (0.20 )   $ (0.06 )   $ 0.81  


84


Table of Contents

ITEM 9.   CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
 
Not Applicable.
 
ITEM 9A.   CONTROLS AND PROCEDURES
 
Evaluation of disclosure controls and procedures.
 
As required by Rule 13a-15(b) under the Exchange Act, we have carried out an evaluation, under the supervision and with the participation of our management, including our Chief Executive Officer (“CEO”) and our Chief Financial Officer (“CFO”), of the effectiveness, as of the end of the period covered by this report, of the design and operation of our “disclosure controls and procedures” as defined in Rule 13a-15(e) promulgated by the SEC under the Exchange Act. Based upon that evaluation, our CEO and our CFO concluded that our disclosure controls and procedures, as of the end of such period, were adequate and effective to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Commission’s rules and forms, and that such information was accumulated and communicated to management, as appropriate, to allow timely decisions regarding required disclosure.
 
Management’s Report on Internal Control Over Financial Reporting
 
The management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rules 13a-15(f) and 15d-15(f) promulgated under the Securities Exchange Act of 1934 as a process designed by, or under the supervision of, the Company’s principal executive and principal financial officers and effected by the Company’s board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:
 
  •  Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company;
 
  •  Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and
 
  •  Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
Under the supervision and with the participation of management, including our principal executive and financial officers, we assessed the Company’s internal control over financial reporting as of December 29, 2007, based on criteria for effective internal control over financial reporting established in Internal Control — Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Based on this assessment, management concluded that the Company maintained effective internal control over financial reporting as of December 29, 2007 based on the specified criteria.
 
The effectiveness of the Company’s internal control over financial reporting as of December 29, 2007 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which is included herein.


85


Table of Contents

Changes in Internal Control Over Financial Reporting
 
During the quarter ended December 29, 2007, there were no changes in our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting except as described above.
 
ITEM 9B.   OTHER INFORMATION
 
Our policy governing transactions in our securities by directors, officers, and employees permits our officers, directors, funds affiliated with our directors, and certain other persons to enter into trading plans complying with Rule 10b5-l under the Securities Exchange Act of 1934, as amended. We have been advised that certain officers (including; Geoffrey Clear, Senior Vice President, Chief Financial Officer & Treasurer and Glen Weinstein, Senior Vice President, General Counsel & Secretary) of the Company have entered into a trading plan (each a “Plan” and collectively, the “Plans”) covering periods after the date of this annual report on Form 10-K in accordance with Rule 10b5-l and our policy governing transactions in our securities. Generally, under these trading plans, the individual relinquishes control over the transactions once the trading plan is put into place. Accordingly, sales under these plans may occur at any time, including possibly before, simultaneously with, or immediately after significant events involving our company.
 
We anticipate that, as permitted by Rule 10b5-l and our policy governing transactions in our securities, some or all of our officers, directors and employees may establish trading plans in the future. We intend to disclose the names of executive officers and directors who establish a trading plan in compliance with Rule 10b5-l and the requirements of our policy governing transactions in our securities in our future quarterly and annual reports on Form 10-Q and 10-K filed with the Securities and Exchange Commission. However, we undertake no obligation to update or revise the information provided herein, including for revision or termination of an established trading plan, other than in such quarterly and annual reports.
 
PART III
 
ITEM 10.   DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
 
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 29, 2007.
 
ITEM 11.   EXECUTIVE COMPENSATION
 
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 29, 2007.
 
ITEM 12.   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
 
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 29, 2007.
 
ITEM 13.   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
 
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 29, 2007.


86


Table of Contents

ITEM 14.   PRINCIPAL ACCOUNTING FEES AND SERVICES
 
The information required under this item is incorporated herein by reference to the Company’s definitive proxy statement pursuant to Regulation 14A, which proxy statement will be filed with the Securities and Exchange Commission not later than 120 days after the close of the Company’s fiscal year ended December 29, 2007.
 
PART IV
 
ITEM 15.   EXHIBITS, FINANCIAL STATEMENT SCHEDULES
 
(a) The following are filed as part of this Annual Report on Form 10-K:
 
1.   Financial Statements
 
The following consolidated financial statements are included in Item 8:
 
Report of Independent Registered Public Accounting Firm
 
Consolidated Balance Sheets at December 29, 2007 and December 30, 2006
 
Consolidated Statements of Operations for the Years ended December 29, 2007, December 30, 2006, and December 31, 2005
 
Consolidated Statements of Stockholders’ Equity (Deficit) for the Years ended December 29, 2007, December 30, 2006, and December 31, 2005
 
Consolidated Statements of Cash Flows for the Years ended December 29, 2007, December 30, 2006, and December 31, 2005
 
Notes to Consolidated Financial Statements
 
2.   Financial Statement Schedules
 
All other schedules have been omitted since the required information is not present, or not present in amounts sufficient to require submission of the schedule, or because the information required is included in the consolidated financial statements or the Notes thereto.
 
3.   Exhibits — See item 15(b) of this report below
 
(b)   Exhibits
 
The following exhibits are filed as part of and incorporated by reference into this Annual Report:
 
         
Exhibit
   
Number
 
Description
 
  3 .1(1)   Form of Second Amended and Restated Certificate of Incorporation of the Registrant dated November 15, 2005
  3 .2(1)   Amended and Restated By-laws of the Registrant
  4 .1(1)   Specimen Stock Certificate for shares of the Registrant’s Common Stock
  4 .2(1)   Shareholder Rights Agreement between the Registrant and Computershare Trust Company, Inc., as the Rights Agent dated November 15, 2005
  10 .1(1)   Fifth Amended and Restated Registration Rights Agreement by and among the Registrant, the Investors and the Stockholders named therein, dated as of November 10, 2004
  10 .2†(1)   Form of Indemnification Agreement between the Registrant and its Directors and Executive Officers
  10 .3†   Registrant’s 2006 Incentive Compensation Plan (filed as Exhibit 10.4 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .4†   Registrant’s Senior Executive Incentive Compensation Plan (filed as Exhibit 10.4 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)


87


Table of Contents

         
Exhibit
   
Number
 
Description
 
  10 .5†(1)   Amended and Restated 1994 Stock Plan and forms of agreements thereunder
  10 .6†   Amended and Restated 2001 Special Stock Option Plan and forms of agreements thereunder (filed as Exhibit 10.6 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .7†   Amended and Restated 2004 Stock Option and Incentive Plan and forms of agreements thereunder (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .8(1)   Lease Agreement between the Registrant and Burlington Crossing Office LLC for premises located at 63 South Avenue, Burlington, Massachusetts, dated as of October 29, 2002, as amended
  10 .9   Sublease between the Registrant and Lahey Clinic Hospital, Inc. for premises located at 63 South Avenue, Burlington, Massachusetts, dated as of September 20, 2005 (filed as Exhibit 10.9 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .10†*   Form of Executive Agreement between the Registrant and certain executive officers of the Registrant, as amended
  10 .11†(1)   Employment Agreement between the Registrant and Helen Greiner, dated as of January 1, 1997
  10 .12†(1)   Employment Agreement between the Registrant and Colin Angle, dated as of January 1, 1997
  10 .13†(1)   Employment Agreement between the Registrant and Joseph W. Dyer, dated as of February 18, 2004
  10 .14†   Independent Contractor Agreement between the Registrant and Rodney Brooks, dated as of December 30, 2002
  10 .15(1)   Government Contract DAAE07-03-9-F001 (Small Unmanned Ground Vehicle)
  10 .16(1)   Government Contract N00174-03-D-0003 (Man Transportable Robotic System)
  10 .17†(1)   2005 Stock Option and Incentive Plan and forms of agreements thereunder
  10 .18#(1)   Manufacturing and Services Agreement between the Registrant and Gem City Engineering Corporation, dated as of July 27, 2004
  10 .19†*   Non-Employee Directors’ Deferred Compensation Program, as amended
  10 .20   Lease Agreement between the Registrant and Boston Properties Limited Partnership for premises located at 4-18 Crosby Drive, Bedford, Massachusetts, dated as of February 22, 2007 (filed as Exhibit 10.22 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)
  10 .21†   Form of Restricted Stock Award Agreement under the Registrant’s 2005 Stock Option and Incentive Plan (filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on May 24, 2007 and incorporated by reference herein)
  10 .22†   Form of Deferred Stock Award Agreement under the Registrant’s 2005 Stock Option and Incentive Plan (filed as Exhibit 10.5 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .23   Credit Agreement between the Registrant and Bank of America, N.A., dated as of June 5, 2007 (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .24   Master Loan and Security Agreement between the Registrant and Banc of America Leasing and Capital, LLC, dated as of June 13, 2007 and Addendum to Master Loan and Security Agreement between the Registrant and Banc of America Leasing Capital, LLC, dated as of June 19, 2007 (filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .25#   Manufacturing Agreement between the Registrant and Kin Yat Industrial Co. Ltd., dated as of March 23, 2007 (filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  21 .1   Subsidiaries of the Registrant (filed as Exhibit 21.1 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)

88


Table of Contents

         
Exhibit
   
Number
 
Description
 
  23 .1*   Consent of PricewaterhouseCoopers LLP
  24 .1   Power of Attorney (incorporated by reference to the signature page of this report on Form 10-K)
  31 .1*   Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
  31 .2*   Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
  32 .1*   Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
Indicates a management contract or any compensatory plan, contract or arrangement.
 
# Confidential treatment requested for portions of this document.
 
(1) Incorporated by reference herein to the exhibits to the Company’s Registration Statement on Form S-1 (File No. 333-126907)
 
* Filed herewith

89


Table of Contents

SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the Registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized.
 
iROBOT CORPORATION
 
  By: 
/s/  Colin M. Angle
Colin M. Angle
Chief Executive Officer and Director
 
Date: February 25, 2008
 
POWER OF ATTORNEY
 
KNOW ALL MEN BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Colin M. Angle and Geoffrey P. Clear, jointly and severally, his or her attorney-in-fact, with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his or her substitute or substitutes, may do or cause to be done by virtue hereof.
 
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Annual Report on Form 10-K has been signed by the following persons in the capacities indicated on February 25, 2008.
 
             
Signature
 
Title(s)
   
 
/s/  Helen Greiner

Helen Greiner
  Chairman of the Board             
         
/s/  Colin M. Angle

Colin M. Angle
  Chief Executive Officer and Director
(Principal Executive Officer)
   
         
/s/  Geoffrey P. Clear

Geoffrey P. Clear
  Senior Vice President, Chief Financial Officer and Treasurer (Principal Financial Officer)    
         
/s/  Alison Dean

Alison Dean
  Vice President, Financial Controls & Analysis (Principal Accounting Officer)    
         
/s/  Ronald Chwang

Ronald Chwang
  Director    
         
/s/  Jacques S. Gansler

Jacques S. Gansler
  Director    
         
/s/  Rodney A. Brooks

Rodney A. Brooks
  Director    


90


Table of Contents

             
Signature
 
Title(s)
   
 
             
/s/  Andrea Geisser

Andrea Geisser
  Director    
         
/s/  George C. McNamee

George C. McNamee
  Director    
         
/s/  Peter Meekin

Peter Meekin
  Director    
         
/s/  Paul J. Kern

Paul J. Kern
  Director    


91


Table of Contents

EXHIBIT INDEX
 
         
Exhibit
   
Number
 
Description
 
  3 .1(1)   Form of Second Amended and Restated Certificate of Incorporation of the Registrant dated November 15, 2005
  3 .2(1)   Amended and Restated By-laws of the Registrant
  4 .1(1)   Specimen Stock Certificate for shares of the Registrant’s Common Stock
  4 .2(1)   Shareholder Rights Agreement between the Registrant and Computershare Trust Company, Inc., as the Rights Agent dated November 15, 2005
  10 .1(1)   Fifth Amended and Restated Registration Rights Agreement by and among the Registrant, the Investors and the Stockholders named therein, dated as of November 10, 2004
  10 .2†(1)   Form of Indemnification Agreement between the Registrant and its Directors and Executive Officers
  10 .3†   Registrant’s 2006 Incentive Compensation Plan (filed as Exhibit 10.4 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .4†   Registrant’s Senior Executive Incentive Compensation Plan (filed as Exhibit 10.4 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)
  10 .5†(1)   Amended and Restated 1994 Stock Plan and forms of agreements thereunder
  10 .6†   Amended and Restated 2001 Special Stock Option Plan and forms of agreements thereunder (filed as Exhibit 10.6 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .7†   Amended and Restated 2004 Stock Option and Incentive Plan and forms of agreements thereunder (filed as Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .8(1)   Lease Agreement between the Registrant and Burlington Crossing Office LLC for premises located at 63 South Avenue, Burlington, Massachusetts, dated as of October 29, 2002, as amended
  10 .9   Sublease between the Registrant and Lahey Clinic Hospital, Inc. for premises located at 63 South Avenue, Burlington, Massachusetts, dated as of September 20, 2005 (filed as Exhibit 10.9 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  10 .10†*   Form of Executive Agreement between the Registrant and certain executive officers of the Registrant, as amended
  10 .11†(1)   Employment Agreement between the Registrant and Helen Greiner, dated as of January 1, 1997
  10 .12†(1)   Employment Agreement between the Registrant and Colin Angle, dated as of January 1, 1997
  10 .13†(1)   Employment Agreement between the Registrant and Joseph W. Dyer, dated as of February 18, 2004
  10 .14†   Independent Contractor Agreement between the Registrant and Rodney Brooks, dated as of December 30, 2002
  10 .15(1)   Government Contract DAAE07-03-9-F001 (Small Unmanned Ground Vehicle)
  10 .16(1)   Government Contract N00174-03-D-0003 (Man Transportable Robotic System)
  10 .17†(1)   2005 Stock Option and Incentive Plan and forms of agreements thereunder
  10 .18#(1)   Manufacturing and Services Agreement between the Registrant and Gem City Engineering Corporation, dated as of July 27, 2004
  10 .19†*   Non-Employee Directors’ Deferred Compensation Program, as amended
  10 .20   Lease Agreement between the Registrant and Boston Properties Limited Partnership for premises located at 4-18 Crosby Drive, Bedford, Massachusetts, dated as of February 22, 2007 (filed as Exhibit 10.22 to the Registrant’s Annual Report on Form 10-K for the year ended December 30, 2006 and incorporated by reference herein)
  10 .21†   Form of Restricted Stock Award Agreement under the Registrant’s 2005 Stock Option and Incentive Plan (filed as Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed on May 24, 2007 and incorporated by reference herein)


Table of Contents

         
Exhibit
   
Number
 
Description
 
  10 .22†   Form of Deferred Stock Award Agreement under the Registrant’s 2005 Stock Option and Incentive Plan (filed as Exhibit 10.5 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .23   Credit Agreement between the Registrant and Bank of America, N.A., dated as of June 5, 2007 (filed as Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .24   Master Loan and Security Agreement between the Registrant and Banc of America Leasing and Capital, LLC, dated as of June 13, 2007 and Addendum to Master Loan and Security Agreement between the Registrant and Banc of America Leasing Capital, LLC, dated as of June 19, 2007 (filed as Exhibit 10.2 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  10 .25#   Manufacturing Agreement between the Registrant and Kin Yat Industrial Co. Ltd., dated as of March 23, 2007 (filed as Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2007 and incorporated by reference herein)
  21 .1   Subsidiaries of the Registrant (filed as Exhibit 21.1 to the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2005 and incorporated by reference herein)
  23 .1*   Consent of PricewaterhouseCoopers LLP
  24 .1   Power of Attorney (incorporated by reference to the signature page of this report on Form 10-K)
  31 .1*   Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
  31 .2*   Certification Pursuant to Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934
  32 .1*   Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
Indicates a management contract or any compensatory plan, contract or arrangement.
 
# Confidential treatment requested for portions of this document.
 
(1) Incorporated by reference herein to the exhibits to the Company’s Registration Statement on Form S-1 (File No. 333-126907)
 
Filed herewith