e10vq
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
FORM 10-Q
|
|
|
þ |
|
QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934 |
For the quarterly period ended April 3, 2006
Commission File Number: 0-31285
TTM TECHNOLOGIES, INC.
(Exact name of registrant as specified in its charter)
|
|
|
DELAWARE
(State or other jurisdiction of
incorporation or organization)
|
|
91-1033443
(I.R.S. Employer
Identification No.) |
2630 South Harbor Boulevard, Santa Ana, California 92704
(Address of principal executive offices)
(714) 327-3000
(Registrants telephone number, including area code)
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by
section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for
such shorter period that the registrant was required to file such reports), and (2) has been
subject to such filing requirements for the past 90 days.
Yes þ No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer,
or a non-accelerated filer. See definition of accelerated filer and large accelerated filer in
Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer o Accelerated filer þ Non-accelerated filer o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the
Act).
Yes o No þ
Number of shares of common stock, $0.001 par value, of registrant outstanding at May 8, 2006:
41,759,163
TABLE OF CONTENTS
|
|
|
|
|
|
|
Page |
PART I: FINANCIAL INFORMATION |
|
|
|
|
|
|
|
|
|
Item 1.
Financial Statements (unaudited) |
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
As of December 31, 2005 and April 3, 2006 |
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
For the quarter ended April 4, 2005 and April 3, 2006 |
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
For the quarter ended April 4, 2005 and April 3, 2006 |
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
|
12 |
|
|
|
|
18 |
|
|
|
|
18 |
|
|
|
|
|
|
|
|
|
19 |
|
|
|
|
|
|
|
|
|
19 |
|
|
|
|
19 |
|
|
|
|
27 |
|
|
|
|
27 |
|
|
|
|
27 |
|
|
|
|
27 |
|
|
|
|
27 |
|
|
|
|
|
|
|
|
|
28 |
|
Exhibit 31.1 |
Exhibit 31.2 |
Exhibit 32.1 |
Exhibit 32.2 |
2
TTM TECHNOLOGIES, INC.
Consolidated Condensed Balance Sheets
As of December 31, 2005 and April 3, 2006
(unaudited)
(In thousands)
|
|
|
|
|
|
|
|
|
|
|
December 31, |
|
|
April 3, |
|
|
|
2005 |
|
|
2006 |
|
Assets |
|
|
|
|
|
|
|
|
Current assets: |
|
|
|
|
|
|
|
|
Cash and cash equivalents |
|
$ |
61,258 |
|
|
$ |
57,256 |
|
Short-term investments |
|
|
21,100 |
|
|
|
33,197 |
|
Accounts receivable, net of allowances of $4,094 and $4,218, respectively |
|
|
38,631 |
|
|
|
42,422 |
|
Inventories, net |
|
|
12,564 |
|
|
|
12,867 |
|
Prepaid expenses and other |
|
|
2,261 |
|
|
|
1,533 |
|
Deferred income taxes |
|
|
4,601 |
|
|
|
4,101 |
|
|
|
|
|
|
|
|
Total current assets |
|
|
140,415 |
|
|
|
151,376 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Property, plant and equipment: |
|
|
|
|
|
|
|
|
Property, plant and equipment, at cost |
|
|
98,019 |
|
|
|
101,261 |
|
Less: accumulated depreciation |
|
|
(46,221 |
) |
|
|
(48,611 |
) |
|
|
|
|
|
|
|
Property, plant and equipment, net |
|
|
51,798 |
|
|
|
52,650 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other assets: |
|
|
|
|
|
|
|
|
Debt issuance costs, net of accumulated amortization of $33 and $52, respectively |
|
|
199 |
|
|
|
180 |
|
Deferred income taxes |
|
|
6,834 |
|
|
|
4,142 |
|
Goodwill |
|
|
63,153 |
|
|
|
63,153 |
|
Definite-lived intangibles, net of accumulated amortization of $8,061 and
$8,391, respectively |
|
|
10,318 |
|
|
|
9,988 |
|
Deposits and other |
|
|
426 |
|
|
|
502 |
|
|
|
|
|
|
|
|
Total other assets |
|
|
80,930 |
|
|
|
77,965 |
|
|
|
|
|
|
|
|
|
|
$ |
273,143 |
|
|
$ |
281,991 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Liabilities and Stockholders Equity |
|
|
|
|
|
|
|
|
Current liabilities: |
|
|
|
|
|
|
|
|
Accounts payable |
|
$ |
11,310 |
|
|
$ |
12,567 |
|
Accrued salaries, wages and benefits |
|
|
9,921 |
|
|
|
10,430 |
|
Accrued contingencies |
|
|
3,150 |
|
|
|
1,885 |
|
Other accrued expenses |
|
|
1,642 |
|
|
|
1,256 |
|
Income taxes payable |
|
|
2,116 |
|
|
|
1,265 |
|
Other long-term liabilities |
|
|
1,052 |
|
|
|
61 |
|
|
|
|
|
|
|
|
Total current liabilities |
|
|
29,191 |
|
|
|
27,464 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stockholders equity: |
|
|
|
|
|
|
|
|
Common stock, $0.001 par value; 100,000 shares authorized, 41,311 and 41,522
shares issued and outstanding, respectively |
|
|
41 |
|
|
|
42 |
|
Additional paid-in capital |
|
|
159,634 |
|
|
|
161,397 |
|
Retained earnings |
|
|
84,277 |
|
|
|
93,088 |
|
|
|
|
|
|
|
|
Total stockholders equity |
|
|
243,952 |
|
|
|
254,527 |
|
|
|
|
|
|
|
|
|
|
$ |
273,143 |
|
|
$ |
281,991 |
|
|
|
|
|
|
|
|
See accompanying notes to consolidated condensed financial statements.
3
TTM TECHNOLOGIES, INC.
Consolidated Condensed Statements of Operations
For the Quarter Ended April 4, 2005 and April 3, 2006
(unaudited)
(In thousands, except per share data)
|
|
|
|
|
|
|
|
|
|
|
Quarter Ended |
|
|
|
April 4, 2005 |
|
|
April 3, 2006 |
|
Net sales |
|
$ |
58,883 |
|
|
$ |
72,688 |
|
Cost of goods sold |
|
|
45,345 |
|
|
|
52,485 |
|
|
|
|
|
|
|
|
Gross profit |
|
|
13,538 |
|
|
|
20,203 |
|
|
|
|
|
|
|
|
Operating expenses: |
|
|
|
|
|
|
|
|
Selling and marketing |
|
|
3,017 |
|
|
|
3,359 |
|
General and administrative |
|
|
3,404 |
|
|
|
3,584 |
|
Amortization of definite-lived
intangibles |
|
|
300 |
|
|
|
300 |
|
|
|
|
|
|
|
|
Total operating expenses |
|
|
6,721 |
|
|
|
7,243 |
|
|
|
|
|
|
|
|
Operating income |
|
|
6,817 |
|
|
|
12,960 |
|
|
|
|
|
|
|
|
Other income (expense): |
|
|
|
|
|
|
|
|
Interest expense |
|
|
(51 |
) |
|
|
(42 |
) |
Amortization of debt issuance costs |
|
|
(13 |
) |
|
|
(19 |
) |
Interest income and other, net |
|
|
384 |
|
|
|
977 |
|
|
|
|
|
|
|
|
Total other income, net |
|
|
320 |
|
|
|
916 |
|
|
|
|
|
|
|
|
Income before income taxes |
|
|
7,137 |
|
|
|
13,876 |
|
Income tax provision |
|
|
(2,677 |
) |
|
|
(5,065 |
) |
|
|
|
|
|
|
|
Net income |
|
$ |
4,460 |
|
|
$ |
8,811 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic earnings per share |
|
$ |
0.11 |
|
|
$ |
0.21 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diluted earnings per share |
|
$ |
0.11 |
|
|
$ |
0.21 |
|
|
|
|
|
|
|
|
See accompanying notes to consolidated condensed financial statements.
4
TTM TECHNOLOGIES, INC.
Consolidated Condensed Statements of Cash Flows
For the Quarter Ended April 4, 2005 and April 3, 2006
(unaudited)
(In thousands)
|
|
|
|
|
|
|
|
|
|
|
Quarter Ended |
|
|
|
April 4, 2005 |
|
|
April 3, 2006 |
|
Cash flows from operating activities: |
|
|
|
|
|
|
|
|
Net income |
|
$ |
4,460 |
|
|
$ |
8,811 |
|
Adjustments to reconcile net income to net cash provided
by operating activities: |
|
|
|
|
|
|
|
|
Depreciation of property, plant and equipment |
|
|
2,153 |
|
|
|
2,411 |
|
Net gain on sale of property, plant and equipment |
|
|
|
|
|
|
(12 |
) |
Amortization of definite-lived intangible assets |
|
|
330 |
|
|
|
330 |
|
Excess income tax benefit from common stock options exercised
|
|
|
447 |
|
|
|
(372 |
) |
Other |
|
|
48 |
|
|
|
(86 |
) |
Deferred income taxes |
|
|
1,051 |
|
|
|
3,192 |
|
Stock-based compensation |
|
|
|
|
|
|
255 |
|
Changes in operating assets and liabilities: |
|
|
|
|
|
|
|
|
Accounts receivable, net |
|
|
(226 |
) |
|
|
(3,791 |
) |
Inventories, net |
|
|
(966 |
) |
|
|
(303 |
) |
Prepaid expenses and other |
|
|
(212 |
) |
|
|
728 |
|
Accounts payable |
|
|
732 |
|
|
|
1,257 |
|
Accrued contingencies |
|
|
|
|
|
|
(1,265 |
) |
Accrued salaries, wages and benefits and other accrued expenses |
|
|
(3,134 |
) |
|
|
(881 |
) |
Income taxes payable |
|
|
862 |
|
|
|
(306 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net cash provided by operating activities |
|
|
5,545 |
|
|
|
9,968 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash flows from investing activities: |
|
|
|
|
|
|
|
|
Purchase of property, plant and equipment and equipment deposits |
|
|
(2,709 |
) |
|
|
(3,339 |
) |
Proceeds from sale of property, plant and equipment |
|
|
|
|
|
|
12 |
|
Purchases of available-for-sale short-term investments |
|
|
(4,300 |
) |
|
|
|
|
Proceeds from sales of available-for-sale short-term investments |
|
|
17,150 |
|
|
|
|
|
Purchases of held-to-maturity short-term investments |
|
|
(4,588 |
) |
|
|
(25,329 |
) |
Proceeds from redemptions of held-to-maturity short-term investments |
|
|
2,500 |
|
|
|
13,350 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net cash provided by (used in) investing activities |
|
|
8,053 |
|
|
|
(15,306 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash flows from financing activities: |
|
|
|
|
|
|
|
|
Proceeds from exercise of common stock options |
|
|
522 |
|
|
|
964 |
|
Excess income tax benefit from common stock options exercised |
|
|
|
|
|
|
372 |
|
|
|
|
|
|
|
|
Net cash provided by financing activities |
|
|
522 |
|
|
|
1,336 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net increase (decrease) in cash and cash equivalents |
|
|
14,120 |
|
|
|
(4,002 |
) |
Cash and cash equivalents at beginning of period |
|
|
43,188 |
|
|
|
61,258 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash and cash equivalents at end of period |
|
$ |
57,308 |
|
|
$ |
57,256 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Supplemental cash flow information: |
|
|
|
|
|
|
|
|
Cash paid for interest |
|
$ |
20 |
|
|
$ |
25 |
|
Cash paid for income taxes |
|
|
329 |
|
|
|
2,180 |
|
See accompanying notes to consolidated condensed financial statements.
5
TTM TECHNOLOGIES, INC.
Notes to Consolidated Condensed Financial Statements
(unaudited)
(Dollars and shares in thousands, except per share data)
(1) Basis of Presentation
TTM Technologies, Inc., formerly Pacific Circuits, Inc., was incorporated under the laws of
the State of Washington on March 20, 1978 and reincorporated under the laws of the State of
Delaware on August 29, 2005. In July 1999, Power Circuits, Inc. was acquired, and on December 26,
2002, Honeywell Advanced Circuits, Inc., renamed to TTM Advanced Circuits, Inc., (Advanced
Circuits) was acquired, and both became wholly owned subsidiaries of TTM Technologies, Inc. TTM
Technologies International, Inc. was established as a wholly owned subsidiary of TTM Technologies,
Inc. in December 2004. TTM Technologies, Inc. and its wholly owned subsidiaries are collectively
referred to as the Company. The Company is a manufacturer of complex printed circuit boards used
in sophisticated electronic equipment. The Company sells to a variety of customers located both
within and outside of the United States of America.
The accompanying consolidated condensed financial statements have been prepared by the
Company, without audit, pursuant to the rules and regulations of the Securities and Exchange
Commission. Certain information and disclosures normally included in financial statements prepared
in accordance with accounting principles generally accepted in the United States of America have
been condensed or omitted pursuant to such rules and regulations. These consolidated condensed
financial statements reflect all adjustments (consisting only of normal recurring adjustments),
which, in the opinion of management, are necessary to present fairly the financial position, the
results of operations and cash flows of the Company for the periods presented. It is suggested
that these consolidated condensed financial statements be read in conjunction with the consolidated
financial statements and the notes thereto included in the Companys most recent Annual Report on
Form 10-K. The results of operations for the interim periods are not necessarily indicative of the
results to be expected for the full year. The preparation of financial statements in accordance
with accounting principles generally accepted in the United States of America requires management
to make estimates and assumptions that affect the amounts reported in the Companys consolidated
condensed financial statements and accompanying notes. Actual results could differ materially from
those estimates. The Company uses a 13-week fiscal quarter accounting period with the first quarter
ending on the Monday closest to April 1 and the fourth quarter always ending on December 31. The
first fiscal quarters 2005 and 2006 contained 94 and 93 days, respectively.
(2) Cash Equivalents and Short-term Investments
The Company considers highly liquid investments with insignificant interest rate risk and
original maturities to the Company of three months or less to be cash equivalents. Cash and cash
equivalents consist primarily of interest-bearing bank accounts, money market funds and short-term
debt securities.
The Company considers highly liquid investments with a maturity to the Company of more than
three months and less than one year to be short-term investments.
Management determines the appropriate classification of investments at the time of purchase
and reevaluates such designation as of each balance sheet date. Debt securities that the Company
has the ability and intent to hold until maturity are accounted for as held-to-maturity securities
and are carried at amortized cost, which approximates fair market value. Available-for-sale debt
securities are carried at fair value, which approximates cost.
6
Short-term investments as of December 31, 2005 and April 3, 2006 were as follows:
|
|
|
|
|
|
|
|
|
|
|
December 31, 2005 |
|
|
April 3, 2006 |
|
Available-for-sale: |
|
|
|
|
|
|
|
|
Money market funds |
|
$ |
8,215 |
|
|
$ |
8,857 |
|
|
|
|
|
|
|
|
|
|
|
8,215 |
|
|
|
8,857 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held-to-maturity: |
|
|
|
|
|
|
|
|
Corporate bonds and notes |
|
|
27,705 |
|
|
|
28,141 |
|
Negotiable bank certificates of deposit |
|
|
1,200 |
|
|
|
600 |
|
U.S. Treasury and federal agency securities |
|
|
34,516 |
|
|
|
45,619 |
|
|
|
|
|
|
|
|
|
|
|
63,421 |
|
|
|
74,360 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total short-term investments |
|
|
71,636 |
|
|
|
83,217 |
|
Amounts classified as cash equivalents |
|
|
50,536 |
|
|
|
50,020 |
|
|
|
|
|
|
|
|
Amounts classified as short-term investments |
|
$ |
21,100 |
|
|
$ |
33,197 |
|
|
|
|
|
|
|
|
As of April 3, 2006, $74,360 of held-to-maturity debt securities had contractual maturities of
less than one year, and there were no available-for-sale debt securities.
For the year ended December 31, 2005 and the quarters ended April 3, 2006 and April 4, 2005,
realized gains and losses upon the sale of available-for-sale investments were insignificant.
Unrealized gains and losses on available-for-sale investments are insignificant for all periods and
accordingly have not been recorded as a component of other comprehensive income. The specific
identification method is used to compute the realized gains and losses on debt investments.
The Company regularly monitors and evaluates the realizable value of its investments. When
assessing investments for other-than-temporary declines in value, the Company considers such
factors as, among other things, how significant the decline in value is as a percentage of the
original cost, the reason for the decline in value, how long the market value of the investment has
been less than its original cost, the collateral supporting the investments, insurance policies
which protect the Companys investment position and the credit rating issued for the securities by
one or more of the major credit rating agencies.
(3) Inventories
Inventories are stated at the lower of cost (determined on a first-in, first-out basis) or
market. Provision is made to reduce excess and obsolete inventories to their estimated net
realizable value. Inventories as of December 31, 2005 and April 3, 2006 consist of the following:
|
|
|
|
|
|
|
|
|
|
|
December 31, |
|
|
April 3, |
|
|
|
2005 |
|
|
2006 |
|
Raw materials |
|
$ |
3,842 |
|
|
$ |
3,885 |
|
Work-in-process |
|
|
7,407 |
|
|
|
7,107 |
|
Finished goods |
|
|
1,315 |
|
|
|
1,875 |
|
|
|
|
|
|
|
|
|
|
$ |
12,564 |
|
|
$ |
12,867 |
|
|
|
|
|
|
|
|
7
(4) Earnings Per Share
Basic earnings per common share (Basic EPS) excludes dilution and is computed by dividing
net income by the weighted average number of common shares outstanding during the period. Diluted
earnings per common share (Diluted EPS) reflects the potential dilution that could occur if stock
options or other common stock equivalents were exercised or converted into common stock.
The following is a reconciliation of the numerator and denominator used to calculate Basic EPS
and Diluted EPS for the quarters ended April 4, 2005 and April 3, 2006:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quarter Ended April 4, 2005 |
|
|
Quarter Ended April 3, 2006 |
|
|
|
Net |
|
|
|
|
|
|
Per |
|
|
Net |
|
|
|
|
|
|
|
|
|
Income |
|
|
Shares |
|
|
Share |
|
|
Income |
|
|
Shares |
|
|
Per Share |
|
Basic EPS |
|
$ |
4,460 |
|
|
|
41,078 |
|
|
$ |
0.11 |
|
|
$ |
8,811 |
|
|
|
41,441 |
|
|
$ |
0.21 |
|
Effect of options |
|
|
|
|
|
|
706 |
|
|
|
|
|
|
|
|
|
|
|
537 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diluted EPS |
|
$ |
4,460 |
|
|
|
41,784 |
|
|
$ |
0.11 |
|
|
$ |
8,811 |
|
|
|
41,978 |
|
|
$ |
0.21 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The computation of Diluted EPS does not assume exercise or conversion of securities that would
have an antidilutive effect on earnings per common share. Stock options to purchase 1,433 and
1,479 shares of common stock at April 4, 2005 and April 3, 2006, respectively were not considered
in calculating Diluted EPS because the effect would be anti-dilutive.
5) Stock-Based Compensation
At April 3, 2006, the Company had the stock-based compensation plan described below. Prior
to January 1, 2006, the Company accounted for this plan under the recognition and measurement
provisions of APB No. 25. Accordingly, the Company generally recognized compensation expense only when
it granted options with an exercise price below the market price. Any resulting compensation
expense was recognized ratably over the associated service period, which was generally the option
vesting term.
Prior to January 1, 2006, the Company provided pro forma disclosure as if the fair value
method defined by SFAS No. 123 Accounting for Stock Based Compensation (SFAS 123) had been
applied to its stock-based compensation.
Effective January 1, 2006, the Company adopted the fair value recognition provisions of SFAS
No. 123R Share-Based Payments (SFAS 123R), using the modified prospective transition method and
therefore has not restated any prior reported results. Under this transition method, stock-based
compensation expense for the first quarter of fiscal 2006 included compensation expense for all
stock-based compensation awards granted prior to, but not yet vested, as of December 31, 2005 based
on the grant-date fair value estimated in accordance with the original provisions of SFAS 123.
Stock-based compensation expense for all stock-based compensation awards granted after January 1,
2006 is based on the grant-date fair value estimated in accordance with the provisions of SFAS
123R. The Company recognizes these compensation costs net of estimated forfeitures on a
straight-line basis over the requisite service period of the award, which is generally the option
vesting term. The Company estimated the forfeiture rate for the first fiscal quarter 2006 based on
its historical experience.
As a result of adopting SFAS 123R, the impact to the consolidated condensed financial
statements for the fiscal quarter ended April 3, 2006 was a reduction in income before income taxes
of $255, and a reduction in net income of $247. The impact on both basic and diluted earnings per
share for the fiscal quarter ended April 3, 2006 was a decrease of approximately $0.01 per share.
In addition, prior to the adoption of SFAS 123R, the Company presented the tax benefit from the
exercise of common stock option exercises as a component of cash flows from operating activities.
Upon the adoption of SFAS 123R, tax benefits resulting from tax deductions in excess of the
compensation cost recognized for those options are classified as a component of cash flows from
financing activities. This results in a decrease of $372 in cash flows from operating activities
and an increase of $372 in cash flows from financing activities.
8
The pro forma table below reflects net income and basic and diluted net earnings per share for
the first fiscal quarter 2005 had the Company applied the fair value recognition provisions of SFAS
123, as follows:
|
|
|
|
|
|
|
Quarter ended |
|
|
|
April 4, 2005 |
|
Net income, as reported |
|
$ |
4,460 |
|
Add: Stock-based compensation
included in reported net
income, net of related tax
effects |
|
|
|
|
Less: Stock-based compensation
expense determined under the
fair-value-based method for all
awards, net of related tax
effects |
|
|
(929 |
) |
|
|
|
|
Pro forma net income |
|
$ |
3,531 |
|
|
|
|
|
|
|
|
|
|
Basic earnings per share: |
|
|
|
|
As reported |
|
$ |
0.11 |
|
Pro forma |
|
$ |
0.09 |
|
Diluted earnings per share: |
|
|
|
|
As reported |
|
$ |
0.11 |
|
Pro forma |
|
$ |
0.09 |
|
|
Stock-Based Compensation Plan |
In 2000, the Company adopted the Amended and Restated Management Stock Option Plan (the
Plan). The Plan provides for the grant of Incentive Stock Options, as defined by the Internal
Revenue Code (the Code), and nonqualified stock options to our key employees, non-employee
directors and consultants. Awards under this Plan may constitute qualified performance-based
compensation as defined in Section 162(m) of the Code. A maximum of 5,547 shares may be issued
over the life of this Plan. The exercise price is determined by the compensation committee of the
Board of Directors and, for options intended to qualify as Incentive Stock Options, may not be less
than the fair market value as determined by the closing stock price at the date of the grant. Each
option and award shall vest and expire as determined by the compensation committee, generally four
years for employees and three or four years for non-employee directors. Options expire no later
than ten years from the grant date. All grants provide for accelerated vesting if there is a
change in control, as defined in the Plan. The Plan expires on December 1, 2008. All stock
options outstanding as of April 4, 2005, December 31, 2005 and April 3, 2006 were issued under the
Plan.
Upon the exercise of outstanding stock options, the Companys practice is to issue new
registered shares which are reserved for issuance under the Plan.
The fair value of share-based payment awards was estimated using the Black-Scholes option
pricing model. The following assumptions and the resulting weighted average fair values for grants
during the quarters ended April 4, 2005 and April 3, 3006 are follows:
|
|
|
|
|
|
|
|
|
|
|
Quarter ended |
|
|
Quarter ended |
|
|
|
April 4, 2005 |
|
|
April 3, 2006 |
|
Risk-free interest rate |
|
|
3.7 |
% |
|
|
4.6 |
% |
Dividend yield |
|
|
|
% |
|
|
|
% |
Expected volatility |
|
|
96 |
% |
|
|
67 |
% |
Expected term in months |
|
|
54 |
|
|
|
54 |
|
|
|
|
|
|
|
|
|
|
Weighted-average per share fair value of grants |
|
$ |
6.42 |
|
|
$ |
7.44 |
|
9
The fair value calculation is based on stock options granted during the period. The Company
determines the expected term of its stock option awards separately for employees and directors by
periodic review of its historical stock option exercise experience. This calculation excludes
pre-vesting forfeitures and uses assumed future exercise patterns to account for option holders
expected exercise and post-vesting termination behavior for outstanding stock options over their
remaining contractual terms. Expected volatility is calculated by weighting the Companys
historical stock price to calculate expected volatility over the expected term of each grant. The
risk-free interest rate for the expected term of each option granted is based on the U.S. Treasury
yield curve in effect at the time of grant.
Option activity under the Plan for the quarter ended April 3, 2006 was as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weighted- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Average |
|
|
|
|
|
|
|
|
|
|
Weighted- |
|
|
Remaining |
|
|
Aggregate |
|
|
|
|
|
|
|
Average |
|
|
Contractual |
|
|
Intrinsic |
|
|
|
Shares |
|
|
Exercise |
|
|
Term |
|
|
Value |
|
|
|
(in thousands) |
|
|
Price |
|
|
(in years) |
|
|
(in thousands) |
|
Quarter Ended April 3, 2006 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outstanding at December 31, 2005 |
|
|
2,910 |
|
|
$ |
9.45 |
|
|
|
7.1 |
|
|
|
|
|
Granted |
|
|
153 |
|
|
|
12.97 |
|
|
|
|
|
|
|
|
|
Exercised |
|
|
(211 |
) |
|
|
4.58 |
|
|
|
|
|
|
|
|
|
Forfeited/cancelled/expired |
|
|
(88 |
) |
|
|
9.83 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outstanding at April 3, 2006 |
|
|
2,764 |
|
|
$ |
10.00 |
|
|
|
7.0 |
|
|
$ |
14,841 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vested and expected to vest at April 3, 2006 |
|
|
2,646 |
|
|
$ |
10.09 |
|
|
|
6.9 |
|
|
$ |
13,977 |
|
Exercisable at April 3, 2006 |
|
|
1,959 |
|
|
$ |
10.99 |
|
|
|
6.3 |
|
|
$ |
8,641 |
|
The aggregate intrinsic values in the table above represent the total pretax intrinsic value (the
difference between Companys closing stock price on the last trading day of the first fiscal
quarter 2006 and the exercise price, multiplied by the number of in-the-money options) that would
have been received by the option holders had all option holders exercised their options on April 3,
2006. This amount changes based on the fair market value of Companys stock. The total intrinsic
value of options exercised for the quarters ended April 4, 2005
and April 3, 2006 was $1,548 and
$1,472, respectively.
As of April 3, 2006, $2,826 of total unrecognized compensation cost related to stock options
is expected to be recognized over a weighted-average period of 1.6 years.
In the first fiscal quarter ended April 3, 2006 the amounts recognized in the financial
statements with respect to the stock-based compensation plan are as follows:
|
|
|
|
|
|
|
Quarter Ended |
|
|
|
April 3, 2006 |
|
Stock-based compensation expense recognized |
|
$ |
255 |
|
Income tax benefit recognized |
|
|
(8 |
) |
|
|
|
|
Total stock-based compensation expense after income taxes |
|
$ |
247 |
|
|
|
|
|
Many of the Companys stock option awards are intended to qualify as incentive stock options
as defined by the Code. Upon the future exercise of incentive stock options which were vested as
of December 31, 2005, the Company may become entitled to a deduction in its tax returns under
certain circumstances; however, the value of this deduction will be recorded as an increase to additional paid-in capital and not as an
income tax benefit. In the first fiscal quarter ended April 3,
2006, a tax benefit of $545 related to
fully vested incentive stock option awards exercised was recorded as an increase to
additional paid-in capital.
10
(6) Significant Customers
The Companys customers include both original equipment manufacturers (OEMs) and electronic
manufacturing services companies (EMS companies). The Companys OEM customers often direct a
significant portion of their purchases through EMS companies. Sales to our ten largest customers
were 68% and 60% of net sales in the fiscal quarters ended April 4, 2005 and April 3, 2006,
respectively. For the fiscal quarter ended April 3, 2006, two customers accounted for
approximately 29% and 11% of net sales. For the fiscal quarter ended April 4, 2005, two customers
accounted for approximately 32% and 17% of net sales. The loss of one or more major customers or a
decline in sales to the Companys major customers would have a material adverse effect on the
Companys financial condition and results of operations.
(7) Concentration of Credit Risk
In the normal course of business, the Company extends credit to its customers, which are
concentrated in the networking/communications and high-end computing end markets and some of which
are located outside the United States. The Company performs ongoing credit evaluations of
customers and does not require collateral. The Company makes judgments as to its ability to collect
outstanding trade receivables when collection becomes doubtful. Provisions are made based upon a
specific review of significant outstanding invoices, historical collection experience and current
economic trends.
For the purposes of evaluating collection risk, the Company considers the credit risk profile
of the entity from which the receivable is due. As of December 31, 2005 and April 3, 2006, five
customers in the aggregate accounted for 57% and 54%, respectively, of total accounts receivable at
each period end. If one or more of the Companys significant customers were to become insolvent or
were otherwise unable to pay for the manufacturing services provided, it would have a material
adverse effect on the Companys financial condition and results of operations.
11
Item 2. Managements Discussion and Analysis of Financial Condition and Results of Operations
The following discussion of our financial condition and results of operations should be read
in conjunction with our consolidated condensed financial statements and the related notes and the
other financial information included in this Quarterly Report on Form 10-Q. This discussion and
analysis contains forward-looking statements that involve risks and uncertainties. Our actual
results may differ materially from those anticipated in these forward-looking statements as a
result of specified factors, including those set forth in Item 1A Risk Factors of Part II below
and elsewhere in this Quarterly Report on Form 10-Q.
This discussion and analysis should be read in conjunction with Managements Discussion and
Analysis of Financial Condition and Results of Operations set forth in our annual report on Form
10-K for the year ended December 31, 2005, filed with the Securities and Exchange Commission.
Overview
We are a one-stop provider of time-critical and technologically complex printed circuit
boards, which serve as the foundation of sophisticated electronic products. We serve high-end
commercial marketsincluding networking/communications infrastructure, high-end computing and
industrial/medicalwhich are characterized by high levels of complexity, short product life cycles
and moderate production volumes. Our customers include OEMs and EMS companies. Our time-to-market
and high technology focused manufacturing services enable our customers to reduce the time required
to develop new products and bring them to market.
We manufacture printed circuit boards at three specialized and integrated facilities in the
United States. Our facility in Santa Ana, California, specializes in quick-turn work, which has
delivery times of ten days or less and is characterized by small volumes of printed circuit boards.
Our Chippewa Falls, Wisconsin, facility focuses on higher-volume production runs of
technologically complex multilayer printed circuit boards with targeted average lead times of two
to ten weeks. Our Redmond, Washington, facility focuses on mid-volume production of standard
lead-time printed circuit boards. Although our facilities are specialized, we are able to transfer
work, if appropriate, among our plants to maximize production during periods of peak demand.
We measure customers as those companies that have placed at least two orders in the preceding
12-month period. As of April 3, 2006, we had approximately 575 customers and approximately 565 as
of April 4, 2005. Sales to our 10 largest customers accounted for 68% of our net sales in the
first fiscal quarter 2005 and 60% of our net sales in the first fiscal quarter 2006. We sell to
OEMs both directly and indirectly through EMS companies. Sales attributable to our five largest
OEM customers accounted for approximately 58% and 45% of our net sales in the first fiscal quarter
2005 and 2006, respectively.
The following table shows the percentage of our net sales attributable to each of the
principal end markets we served for the periods indicated:
|
|
|
|
|
|
|
|
|
|
|
First Fiscal Quarter |
|
End Markets (1) |
|
2005 |
|
|
2006 |
|
Networking/Communication |
|
|
49.3 |
% |
|
|
44.2 |
% |
High-End Computing |
|
|
25.9 |
|
|
|
23.2 |
|
Industrial/Medical |
|
|
14.3 |
|
|
|
18.4 |
|
Computer Peripherals |
|
|
5.0 |
|
|
|
6.0 |
|
Handheld/Cellular |
|
|
2.4 |
|
|
|
2.7 |
|
Other |
|
|
3.1 |
|
|
|
5.5 |
|
Total |
|
|
100.0 |
% |
|
|
100.0 |
% |
|
|
|
(1) |
|
Sales to EMS companies are classified by the end markets of their OEM customers. |
12
We measure the time sensitivity of our products by tracking the quick-turn percentage of our
work. We define quick-turn orders as those with delivery times of 10 days or less, which typically
captures research and development, prototype, and new product introduction work, in addition to
unexpected short-term demand among our customers. Generally, we quote prices after we receive the
design specifications and the time and volume requirements from our customers. Our quick-turn
services command a premium price as compared to standard lead time products. Quick-turn orders
remained constant at 21% of net sales in both the first fiscal quarter 2005 and the first fiscal
quarter 2006. We also deliver a large percentage of compressed lead-time work with lead times of 11
to 20 days. We receive a premium price for this work as well. Purchase orders may be cancelled
prior to shipment. We charge customers a fee, based on percentage completed, if an order is
cancelled once it has entered production.
Critical Accounting Policies and Estimates
Our consolidated condensed financial statements included in this Form 10-Q have been prepared
in accordance with accounting principles generally accepted in the United States of America. The
preparation of these financial statements requires management to make estimates and assumptions
that affect the reported amounts of assets, liabilities, revenue and expenses, and related
disclosure of contingent assets and liabilities. Management bases its estimates on historical
experience and on various other assumptions that are believed to be reasonable under the
circumstances, the results of which form the basis for making judgments about the carrying values
of assets and liabilities that are not readily apparent from other sources. Senior management has
discussed the development, selection and disclosure of these estimates with the audit committee of
our board of directors. Actual results may differ from these estimates under different assumptions
or conditions.
Accounting policies where significant judgments and estimates are made include asset valuation
related to bad debts and inventory obsolescence; sales returns and allowances; impairment of
long-lived assets, including goodwill and intangible assets; realizability of deferred tax assets;
stock-based compensation; and self-insured medical reserves. A detailed description of these
estimates and our policies to account for them is included in the notes to our Annual Report on
Form 10-K for the year ended December 31, 2005, filed with the Securities and Exchange Commission.
We provide customary credit terms to our customers and generally do not require collateral. We
perform ongoing credit evaluations of the financial condition of our customers and maintain an
allowance for doubtful accounts based upon historical collections experience and expected
collectibility of accounts. Our actual bad debts may differ from our estimates.
In assessing the realization of inventories, we are required to make judgments as to future
demand requirements and compare these with current and committed inventory levels. Our inventory
requirements change based on our projected customer demand, which changes due to market conditions,
technological and product life cycle changes and longer or shorter than expected usage periods. We
maintain certain finished goods inventories near certain key customer locations in accordance with
agreements. Although this inventory is typically supported by valid purchase orders, should these
customers ultimately not purchase these inventories, our results of operations and financial
condition would be adversely affected.
We derive revenues primarily from the sale of printed circuit boards using customer-supplied
engineering and design plans and recognize revenues when persuasive evidence of a sales arrangement
exists, the sales terms are fixed and determinable, title and risk of loss has transferred, and
collectibility is reasonably assuredgenerally when products are shipped to the customer. We
provide our customers a limited right of return for defective printed circuit boards. We accrue an
estimated amount for sales returns and allowances at the time of sale based on historical
information. To the extent actual experience varies from our historical experience, revisions to
the allowance may be required.
13
We have significant long-lived tangible and intangible assets consisting of property, plant
and equipment, goodwill and definite-lived intangibles. We review these assets for impairment
whenever events or changes in circumstances indicate that the carrying amount of such assets may
not be recoverable. In addition, we perform an impairment test related to goodwill at least
annually. Our goodwill and intangibles are largely attributable to our quick-turn business. During
the fourth fiscal quarter 2005, we performed an impairment assessment of our goodwill, which
requires the use of a fair-value based analysis, and determined that no impairment existed. At
April 3, 2006, we determined that there were no events or changes in circumstances which indicated
that the carrying amount of long-lived tangible assets and definite-lived intangible assets may not
be recoverable. We use an estimate of the future undiscounted net cash flows in measuring whether
our long-lived tangible assets and definite-lived intangible assets are recoverable. If forecasts
and assumptions used to support the realizability of our long-lived assets change in the future,
significant impairment charges could result that would adversely affect our results of operations
and financial condition.
Deferred income tax assets are reviewed for recoverability and valuation allowances are
provided, when necessary, to reduce deferred tax assets to the amounts expected to be realized. At
April 3, 2006, we have net deferred income tax assets of $8.2 million, which is net of a valuation
allowance of approximately $2.5 million. Should our expectations of taxable income change in
future periods, it may be necessary to adjust our valuation allowance, which could positively or
negatively affect our results of operations in the period such a determination is made. In
addition, we record income tax provision or benefit during interim periods at a rate that is based
on expected results for the full year. If future changes in market conditions cause actual results
for the year to be more or less favorable than those expected, adjustments to the effective income
tax rate could be required.
Effective January 1, 2006, we adopted the fair value recognition provisions of SFAS No. 123R,
using the modified prospective transition method, and therefore have not restated prior periods
results. Under this method we recognize compensation expense for all share-based payments granted
after January 1, 2006 and prior to but not yet vested as of January 1, 2006, in accordance with
SFAS No. 123R. Under the fair value recognition provisions of SFAS No. 123R, we recognize
stock-based compensation net of an estimated forfeiture rate and only recognize compensation cost
for those shares expected to vest over the requisite service period of the award using a
straight-line method. Prior to SFAS No. 123R adoption, we accounted for share-based payments under
APB No. 25, and therefore we generally recognized compensation expense only when we granted options
with an exercise price below the market price on the date of grant.
We
estimate the value of share-based awards on the date of grant using
the Black-Scholes
option pricing model. Calculating the fair value of share-based payment awards requires the input of
highly subjective assumptions, including the expected term of the share-based payment awards and
expected stock price volatility. The expected term represents the average time that options that
vest are expected to be outstanding. The expected volatility rates are
estimated based on a weighted average of the historical volatilities of our common stock. The
assumptions used in calculating the fair value of share-based payment awards represent managements
best estimates, but these estimates involve inherent uncertainties and the application of
management judgment. As a result, if factors change and we use different assumptions, our
stock-based compensation expense could be materially different in the future. In addition, we are
required to estimate the expected forfeiture rate and only recognize expense for those shares
expected to vest. We have currently estimated that our forfeiture rate will be 7 percent. If our
actual forfeiture rate is materially different from our estimate, the stock-based compensation
expense could be significantly different from what we have recorded in the current period. During
the quarter ended April 3, 2006 share-based compensation expense was $0.3 million. At April 3,
2006, total unrecognized estimated compensation expense related to non-vested stock options was
$2.8 million which is expected to be recognized over a
weighted-average period of 1.6 years.
We are self-insured for group health insurance benefits provided to our employees, and we
purchase insurance to protect against claims at the individual and aggregate level. The insurance
carrier adjudicates and processes employee claims and is paid a fee for these services. We
reimburse our insurance carrier for paid claims subject to variable monthly limitations. We
estimate our exposure for claims incurred but not paid at the end of each reporting period and use
historical information supplied by our insurance carrier and broker to estimate our liability for
these claims. This liability is subject to a total limitation that varies based on employee
enrollment and factors that are established at each annual contract renewal. Our actual claims
experience may differ from our estimates.
14
Results of Operations
First Fiscal Quarter 2006 Compared to the First Fiscal Quarter 2005
There were 94 and 93 days in the first fiscal quarters 2005 and 2006, respectively.
The following table sets forth statement of operations data expressed as a percentage of net
sales for the periods indicated:
|
|
|
|
|
|
|
|
|
|
|
Quarter Ended |
|
|
|
April 4, |
|
|
April 3, |
|
|
|
2005 |
|
|
2006 |
|
Net sales |
|
|
100.0 |
% |
|
|
100.0 |
% |
Cost of goods sold |
|
|
77.0 |
|
|
|
72.2 |
|
|
|
|
|
|
|
|
Gross profit |
|
|
23.0 |
|
|
|
27.8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating expenses: |
|
|
|
|
|
|
|
|
Selling and marketing |
|
|
5.1 |
|
|
|
4.6 |
|
General and administrative |
|
|
5.8 |
|
|
|
5.0 |
|
Amortization of definite-lived intangibles |
|
|
0.5 |
|
|
|
0.4 |
|
|
|
|
|
|
|
|
Total operating expenses |
|
|
11.4 |
|
|
|
10.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating income |
|
|
11.6 |
|
|
|
17.8 |
|
Other income (expense): |
|
|
|
|
|
|
|
|
Interest expense |
|
|
(0.1 |
) |
|
|
(0.1 |
) |
Amortization of debt issuance costs |
|
|
|
|
|
|
|
|
Interest income and other, net |
|
|
0.6 |
|
|
|
1.4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Income before income taxes |
|
|
12.1 |
|
|
|
19.1 |
|
Income tax provision |
|
|
(4.5 |
) |
|
|
(7.0 |
) |
|
|
|
|
|
|
|
Net income |
|
|
7.6 |
% |
|
|
12.1 |
% |
|
|
|
|
|
|
|
Net Sales
Net sales increased $13.8 million or 23.4% from $58.9 million in the first fiscal quarter 2005
to $72.7 million in the first fiscal quarter 2006 due to increases in production volume and
pricing. Volume increased 17% primarily due to higher demand from our customers for product with
intermediate lead times. Prices rose 7% primarily due to favorable price trends in quick turn
work. We generally charge higher prices for printed circuit boards with time sensitive delivery
requirements, high layer counts and other high-technology features because of both the higher
material content and the greater level of skill required to manufacture these boards accurately.
Gross Profit
Cost of goods sold increased $7.2 million, or 15.7%, from $45.3 million for the first fiscal
quarter 2005 to $52.5 million for the first fiscal quarter 2006. The primary factors increasing
cost of goods sold were higher labor, material and variable overhead costs, which increased because
of the higher number of printed circuit boards sold. In addition, higher wage rates, higher
incentive compensation expense, and greater headcount contributed to increased labor costs. Labor
expense also included stock-based compensation expense in 2006 compared to none in 2005. As a
percentage of net sales, cost of goods sold decreased from 77.0% for the first fiscal quarter 2005
to 72.2% for the first fiscal quarter 2006 due primarily to greater operating efficiency and
increased absorption of fixed costs.
As a result of the foregoing, gross profit increased $6.7 million, or 49.2%, from $13.5
million for the first fiscal quarter 2005 to $20.2 million for the first fiscal quarter 2006. Our
gross margin increased from 23.0% in the first fiscal quarter 2005 to 27.8% in the first fiscal
quarter 2006.
15
The improvement in our gross margin was primarily due to higher prices for our products
partially offset by higher cost of goods sold, which increased due to the factors discussed above. This
improvement in gross margin was aided by greater operating efficiency and increased absorption of
fixed costs due to increased production. Printed circuit board manufacturing is a multi-step
process that requires a certain level of equipment and staffing for even minimal production
volumes. As production increases, our employees are able to work more efficiently and produce more
printed circuit boards without incurring significant cost increases. However, at higher capacity
utilization rates, additional employees and capital may be required. These gains in efficiency
partially offset the increased costs related to our shift toward more complex work. Our average
layer count decreased from 16.1 in the first fiscal quarter 2005 to 15.4 in the first fiscal
quarter 2006.
Operating Expenses
Sales and marketing expenses increased by $0.4 million from $3.0 million or 5.1% of net sales,
for the first fiscal quarter 2005 to $3.4 million, or 4.6% of net sales, for the first fiscal
quarter 2006. The increase in expense was the result of additional commissions paid on more
printed circuit boards sold. The decrease as a percentage of net sales resulted from improved
absorption of fixed selling costs.
General and administrative expenses increased $0.2 million from $3.4 million, or 5.8% of net
sales, for the first fiscal quarter 2005 to $3.6 million, or 5.0% of net sales, for the first
fiscal quarter 2006. The increase in expenses in the first fiscal quarter 2006 resulted primarily
from stock-based compensation, which was not included in our financial statements in 2005, as well
as higher incentive compensation expense. This increase in expenses was partially offset by lower
audit fees. General and administrative expenses decreased as a percentage of net sales due to the
relatively fixed nature of these expenses and our higher sales base.
Other Income
Other income increased $0.6 million from income of $0.3 million in the first fiscal quarter
2005 to income of $0.9 million in the first fiscal quarter 2006. This increase resulted from higher
interest income from our higher cash and short term investment balance as well as higher interest
rates.
Income Taxes
The provision for income taxes increased from $2.7 million for the first fiscal quarter 2005
to $5.1million for the first fiscal quarter 2006. The increase in the income tax provision resulted
primarily from higher pre tax income partially offset by a lower estimated effective tax rate for
2006 than for 2005. Our effective tax rate for the first fiscal quarter 2006 was 36.5% compared to
37.5% for the first fiscal quarter 2005. Our effective tax rate is primarily impacted by the
federal income tax rate, state income taxes and utilization of other credits and deductions
available to us. We record income tax expense or benefit at a rate that is based on expected
results for the year. If future changes in market conditions cause actual results for the year to
be more or less favorable than those expected, adjustments to the effective income tax rate could
be required.
Liquidity and Capital Resources
Our principal sources of liquidity have been cash provided by operations, proceeds from
employee exercises of stock options and proceeds from our public offerings. Our principal uses of
cash have been to meet debt service requirements, finance capital expenditures and fund working
capital requirements. We anticipate that financing capital expenditures, funding working capital
requirements and financing possible acquisitions will continue to be the principal demands on our
cash in the future. As of April 3, 2006, we had working capital of approximately $123.9 million
compared to $111.2 million at December 31, 2005. The increase in working capital is primarily
attributable to cash provided by operations that has been invested in short-term investments as
well as accounts receivable.
Our 2006 capital plan is expected to total approximately $13 million and will fund capital
equipment purchases to increase capacity and expand our technological capabilities throughout our
facilities.
16
The following table provides information on future minimum lease payments under non-cancelable
operating leases, and current purchase obligations related to capital expenditures reflected on our
balance sheet under generally accepted accounting principles as of April 3, 2006 (in thousands):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Less than |
|
|
|
|
|
|
|
|
|
|
Contractual Obligations |
|
Total |
|
|
1 year |
|
|
1-3 years |
|
|
4-5 years |
|
|
After 5 years |
|
Operating leases |
|
$ |
228 |
|
|
$ |
135 |
|
|
$ |
93 |
|
|
$ |
|
|
|
$ |
|
|
Purchase obligations |
|
|
183 |
|
|
|
183 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Accrued contingencies |
|
|
1,885 |
|
|
|
1,885 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total contractual obligations |
|
$ |
2,296 |
|
|
$ |
2,203 |
|
|
$ |
93 |
|
|
$ |
|
|
|
$ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Based on our current level of operations, we believe that cash generated from operations,
available cash and amounts available under our senior credit facility will be adequate to meet our
currently anticipated capital expenditures and working capital needs for the next 12 months and
beyond. Our principal liquidity needs for periods beyond the next 12 months are for operating lease
payments as indicated in our contractual obligations table above and for future capital
expenditures.
Net cash provided by operating activities was $10.0 million in the first fiscal quarter 2006,
compared to $5.5 million in the first fiscal quarter 2005. Our first fiscal quarter 2006 operating
cash flow of $10.0 million primarily reflects net income of $8.8 million, $2.7 million of
depreciation and amortization, a $3.2 million decrease in deferred income taxes, and $0.3 million
of stock-based compensation partially offset by a net increase in working capital of $4.9 million,
excluding cash and short-term investments, and $0.1 million of other items.
Net cash used in investing activities was $15.3 million in the first fiscal quarter 2006,
compared to net cash provided by investing activities of $8.1 million in the first fiscal quarter
2005. In the first fiscal quarter 2006, we purchased $3.3 million of property, plant and equipment
and had a net increase in short-term investments of $12.0 million.
Net cash provided by financing activities was $1.3 million in the first fiscal quarter 2006
compared to $0.5 million in the first fiscal quarter 2005. Our first fiscal quarter 2006 financing
net cash flow reflects net proceeds of $1.0 million from employee stock option exercises and
approximately $0.3 million of excess tax benefit from the exercise of common stock options beyond
that included as a tax benefit within cash flows from operating activities. Beginning with our
adoption of SFAS No. 123R on January 1, 2006, the excess of tax benefits upon exercise of common
stock options is reported as a cash flow from financing activities.
We have a committed revolving credit facility of $25 million with a final maturity date of
July 15, 2008. We have a one-time option to increase the size of our revolving credit facility to
$50 million provided that no default or event of default exists, as defined in the credit
agreement. Our revolving loan facility contains a $5 million letter of credit sub-facility. We
may borrow, repay and reborrow under the revolving loan facility at any time. The revolving loan
bears interest at rates ranging from LIBOR plus 1.0% to 1.75% or the Alternate Base Rate, as
defined in the credit agreement, plus 0.0% to 0.5%. The amount added to the LIBOR rate or the
Alternate Base Rate varies depending upon our leverage ratio, as defined in the agreement. As of
April 3, 2006, we had no outstanding revolving loan balances. We pay quarterly a commitment fee
ranging from 0.20% to 0.35% on the unused revolving commitment amount. The credit facility is
secured by substantially all of our assets and contains financial covenants customary for this type
of financing. As of April 3, 2006, we were in compliance with the covenants of our revolving credit
facility.
Foreign Currency Exchange Risk
All of our sales are denominated in U.S. dollars, and as a result, we have relatively little
exposure to foreign currency exchange risk with respect to sales made.
Impact of Inflation
We believe that our results of operations are not dependent upon moderate changes in the
inflation rate as we expect that we generally will be able to pass along component price increases
to our customers.
17
Seasonality
We have historically experienced some seasonality in our first fiscal quarter associated with
our quick-turn business and in our second and third fiscal quarters in our computer peripherals and
consumer electronics products.
Item 3. Quantitative and Qualitative Disclosures about Market Risk
Interest Rate Risk. Our revolving loan bears interest at rates ranging from 1.0% to 1.75% per
annum plus the applicable LIBOR or from 0.0% to 0.5% per annum plus the Alternate Base Rate, as
defined in the agreement governing the amended and restated credit facility. A 10% change in
interest rates is not expected to materially affect the interest expense to be incurred on this
facility during such period. As of April 3, 2006, we had no outstanding revolving loans.
Item 4. Controls and Procedures
Disclosure controls and procedures are controls and other procedures that are designed to
ensure that information required to be disclosed in our reports filed or submitted under the
Exchange Act is recorded, processed, summarized and reported within the time periods specified in
the Securities and Exchange Commissions rules and forms. Disclosure controls and procedures
include controls and procedures designed to ensure that information required to be disclosed in our
reports filed under the Exchange Act is accumulated and communicated to management, including our
Chief Executive Officer and Chief Financial Officer as appropriate, to allow timely decisions
regarding required disclosure.
In designing and evaluating the disclosure controls and procedures, management recognized that
any controls and procedures, no matter how well designed and operated, can provide only reasonable
assurance of achieving the desired control objectives, as ours are designed to do, and management
necessarily was required to apply its judgment in evaluating the cost-benefit relationship of
possible controls and procedures.
We carried out an evaluation of the effectiveness of the design and operation of our
disclosure controls and procedures as of April 3, 2006. This evaluation was carried out under the
supervision and with the participation of our management, including our Chief Executive Officer and
Chief Financial Officer. Based upon that evaluation, our Chief Executive Officer and Chief
Financial Officer concluded that our disclosure controls and procedures are effective as of April
3, 2006. There have been no significant changes in our internal control over financial reporting
(as defined in Rules 13a 15(f) and 15d 15(f) under the Exchange Act) during the fiscal
quarter ended April 3, 2006 that have materially affected, or are reasonably likely to materially
affect, our internal control over financial reporting subsequent to the date we carried out our
evaluation.
18
PART II. OTHER INFORMATION
Item 1. Legal Proceedings
From time to time we may become a party to various legal proceedings arising in the ordinary
course of our business. There can be no assurance that we will prevail in any such litigation.
Reference is made to the disclosure regarding our pending patent infringement lawsuit filed by
Lemelson Medical, Education and Research Foundation, L.P. in our annual report on Form 10-K for the
year ended December 31, 2005. There have been no material developments in that case since the date
of that report.
Item 1A. RISK FACTORS
An investment in our common stock involves a high degree of risk. You should carefully
consider the factors described below, in addition to those discussed elsewhere in this report, in
analyzing an investment in our common stock. If any of the events described below occurs, our
business, financial condition and results of operations would likely suffer, the trading price of
our common stock could fall, and you could lose all or part of the money you paid for our common
stock.
In addition, the following factors could cause our actual results to differ materially from
those projected in our forward-looking statements, whether made in this 10-Q, our annual or
quarterly reports to stockholders, future press releases, SEC filings or orally, whether in
presentations, responses to questions or otherwise.
Risks Related to Our Company
We are heavily dependent upon the worldwide electronics industry, which is characterized by
significant economic cycles and fluctuations in product demand. A significant downturn in the
electronics industry could result in decreased demand for our manufacturing services and lower our
sales and gross margins.
A majority of our revenues is generated from the electronics industry, which is characterized
by intense competition, relatively short product life cycles, and significant fluctuations in
product demand. Furthermore, the industry is subject to economic cycles and recessionary periods
and would be negatively affected by a contraction in the U.S. economy and worldwide electronics
market. Moreover, due to the uncertainty in the end markets served by most of our customers, we
have a low level of visibility with respect to future financial results. A lasting economic
recession, excess manufacturing capacity, or a decline in the electronics industry could negatively
affect our business, results of operations, and financial condition. For example, our net sales
declined from $129.0 million in 2001 to $89.0 million in 2002, due to a significant downturn in
demand in the electronics industry during 2001 and 2002. A decline in our net sales could harm our
profitability and results of operations and could require us to record an additional valuation
allowance against our deferred tax assets or recognize an impairment of our long-lived assets,
including goodwill and other intangible assets.
During periods of excess global printed circuit board manufacturing capacity, our gross margins may
fall and/or we may have to incur restructuring charges if we choose to reduce the capacity of or
close any of our facilities.
When we experience excess capacity, our sales revenues may not fully cover our fixed overhead
expenses, and our gross margins will fall. In addition, we generally schedule our quick-turn
production facilities at less than full capacity to retain our ability to respond to unexpected
additional quick-turn orders. However, if these orders are not received, we may forego some
production and could experience continued excess capacity. Our recent expansion of our Chippewa
Falls facility would exacerbate any excess capacity issues if demand for services were to decrease
significantly.
If we conclude we have significant, long-term excess capacity, we may decide to permanently
close one or more of our facilities, and lay off some of our employees. Closures or lay-offs could
result in our recording restructuring charges such as severance, other exit costs, and asset
impairments, as we did due to the closure of our Burlington, Washington, facility in 2002 and the
subsequent sale of the facility in 2004 and the lay off of employees at our Redmond, Washington,
facility in 2003.
19
We are dependent upon a small number of OEM customers for a large portion of our net sales, and a
decline in sales to major customers could harm our results of operations.
A small number of customers are responsible for a significant portion of our net sales. Our
five largest OEM customers accounted for approximately 54% of our net sales in 2005 and
approximately 45% of our net sales in the first fiscal quarter 2006. Sales attributed to OEMs
include both direct sales as well as sales that the OEMs place through EMS providers. If our
customers fail to place orders with us at past levels, it would harm our business, results of
operations, and financial condition. We expect a significant portion of our net sales will continue
to be generated by a small number of customers.
Our customer concentration could fluctuate, depending on future customer requirements, which
will depend in large part on market conditions in the electronics industry segments in which our
customers participate. The loss of one or more major customers or a decline in sales to our major
customers could significantly harm our business, results of operations, and financial condition and
lead to declines in the trading price of our common stock. In addition, we generate significant
accounts receivable in connection with providing manufacturing services to our customers. If one or
more of our significant customers were to become insolvent or were otherwise unable to pay for the
manufacturing services provided by us, our results of operations would be harmed.
We compete against manufacturers in Asia, where production costs are lower. These competitors may
gain market share in our key market segments, which may have an adverse effect on the pricing of
our products.
We may be at a competitive disadvantage with respect to price when compared to manufacturers
with lower-cost facilities in Asia and other locations. We believe price competition from printed
circuit board manufacturers in Asia and other locations with lower production costs may play an
increasing role in the market. We do not have offshore facilities in lower-cost locations such as
Asia. While historically our competitors in these locations have produced less technologically
advanced printed circuit boards, they continue to expand their capacity and capabilities with
advanced equipment to produce higher technology printed circuit boards. In addition, fluctuations
in foreign currency exchange rates may benefit these offshore competitors. As a result, these
competitors may gain market share, which may force us to lower our prices, reducing our gross
margins.
We are exposed to the credit risk of some of our customers and to credit exposures in weakened
markets.
Most of our sales are on an open credit basis, with standard industry payment terms. We
monitor individual customer payment capability in granting such open credit arrangements, seek to
limit such open credit to amounts we believe the customers can pay, and maintain reserves we
believe are adequate to cover exposure for doubtful accounts. During periods of economic downturn
in the electronics industry and the global economy, our exposure to credit risks from our customers
increases. Although we have programs in place to monitor and mitigate the associated risks, such
programs may not be effective in reducing our credit risks.
Our 10 largest customers accounted for approximately 66% of our net sales in 2005 and
approximately 60% of our net sales in the first fiscal quarter 2006. Our OEM customers often
direct a significant portion of their purchases through a relatively limited number of EMS
companies. Our contractual relationship is typically with the EMS companies, who are obligated to
pay us for our products. Because we expect our OEM customers to continue to direct our sales to
EMS companies, we expect to continue to be subject to the credit risk of a limited number of
customers. This concentration of customers exposes us to increased credit risks. If one or more
of our significant customers were to become insolvent or were otherwise unable to pay us, our
results of operations would be harmed.
Some of our customers are EMS companies located abroad. Our exposure has increased as these
foreign customers continue to expand. Our foreign sales are denominated in U.S. dollars, and are
typically on the same open credit basis and terms described above. Our foreign receivables are
expected to continue to grow as a percentage of our total receivables. We do not utilize credit
insurance as a risk management tool.
20
We expect to continue to pursue acquisitions to expand our operations, and we may have trouble
integrating acquisitions. Acquisitions involve numerous risks.
As part of our business strategy, we expect that we will continue to grow by pursuing
acquisitions of businesses, technologies, assets, or product lines that complement or expand our
existing business. We currently have no commitments or agreements to acquire any business. Our
existing credit facility restricts our ability to acquire the assets or business of other companies
and, accordingly, will require us to obtain the consent of our lenders and could require us to pay
significant fees, become subject to reduced liquidity, or become subject to additional or more
restrictive covenants in order to consummate such acquisitions. Consequently, we may not be able to
identify suitable acquisition candidates or finance and complete transactions that we choose to
pursue.
Our acquisition of companies and businesses and expansion of operations involve risks,
including the following:
|
|
|
the potential inability to identify assets best suited to our business plan; |
|
|
|
|
the potential inability to successfully integrate acquired operations and
businesses or to realize anticipated synergies, economies of scale, or other expected
value; |
|
|
|
|
diversion of managements attention from normal daily operations of the business; |
|
|
|
|
difficulties in managing production and coordinating operations at new sites; |
|
|
|
|
the potential inability to retain existing customers of acquired companies when we desire to do so; |
|
|
|
|
insufficient revenues to offset increased expenses associated with acquisitions; |
|
|
|
|
the potential need to restructure, modify, or terminate customer relationships
of the acquired company; |
|
|
|
|
an increased concentration of business from existing or new customers; and |
|
|
|
|
the potential loss of key employees of acquired operations. |
Acquisitions may cause us to:
|
|
|
issue common stock that would dilute our current stockholders percentage ownership; |
|
|
|
|
issue debt; |
|
|
|
|
assume liabilities; |
|
|
|
|
acquire leased facilities with relatively short lease expirations or with no options to renew; |
|
|
|
|
record goodwill and non-amortizable intangible assets that will be subject to
impairment testing and potential periodic impairment charges; |
|
|
|
|
enter markets in which we have limited or no prior experience; |
|
|
|
|
incur amortization expenses related to certain intangible assets; |
|
|
|
|
incur large and immediate write-offs; |
|
|
|
|
incur costs, whether or not a proposed acquisition is consummated; |
|
|
|
|
incur unanticipated costs; or |
|
|
|
|
become subject to litigation and environmental issues. |
21
Acquisitions of high-technology companies are inherently risky, and no assurance can be given
that our previous or future acquisitions will be successful and will not harm our business,
operating results, or financial condition. Failure to manage and successfully integrate
acquisitions we make could harm our business and operating results in a material way. Even when an
acquired company has already developed and marketed products, product enhancements may not be made
in a timely fashion. In addition, unforeseen issues might arise with respect to such products after
the acquisition.
We rely on suppliers for the timely delivery of raw materials used in manufacturing our printed
circuit boards, and an increase in industry demand or the presence of a shortage for these raw
materials may increase the price of these raw materials and reduce our gross margins. If a raw
material supplier fails to satisfy our product quality standards, it could harm our customer
relationships.
To manufacture printed circuit boards, we use raw materials such as laminated layers of
fiberglass, copper foil, chemical solutions, and other commodity products, which we order from our
suppliers. Although we have preferred suppliers for most of these raw materials, the materials we
use are generally readily available in the open market, and other potential suppliers exist.
However, from time to time, we may experience increases in raw material prices, based on demand
trends, which can negatively affect our gross margins. In addition, consolidations and
restructuring in our supplier base may result in adverse materials pricing due to reduction in
competition among our suppliers. Furthermore, if a raw material supplier fails to satisfy our
product quality standards, it could harm our customer relationships. Suppliers may from time to
time extend lead times, limit supplies, or increase prices, due to capacity constraints or other
factors, which could harm our ability to deliver our products on a timely basis.
If we are unable to respond to rapid technological change and process development, we may not be
able to compete effectively.
The market for our manufacturing services is characterized by rapidly changing technology and
continual implementation of new production processes. The future success of our business will
depend in large part upon our ability to maintain and enhance our technological capabilities, to
manufacture products that meet changing customer needs, and to successfully anticipate or respond
to technological changes on a cost-effective and timely basis. We expect that the investment
necessary to maintain our technological position will increase as customers make demands for
products and services requiring more advanced technology on a quicker turnaround basis. We may not
be able to raise additional funds in order to respond to technological changes as quickly as our
competitors.
In addition, the printed circuit board industry could encounter competition from new or
revised manufacturing and production technologies that render existing manufacturing and production
technology less competitive or obsolete. We may not respond effectively to the technological
requirements of the changing market. If we need new technologies and equipment to remain
competitive, the development, acquisition, and implementation of those technologies and equipment
may require us to make significant capital investments.
Competition in the printed circuit board market is intense, and we could lose market share if we
are unable to maintain our current competitive position in end markets using our quick-turn, high
technology and high-mix manufacturing services.
The printed circuit board industry is intensely competitive, highly fragmented, and rapidly
changing. We expect competition to continue, which could result in price reductions, reduced gross
margins, and loss of market share. Our principal domestic competitors include DDi, Endicott
Interconnect Technologies, Merix, Sanmina-SCI, and Tyco. In addition, we increasingly compete on an
international basis, and new and emerging technologies may result in new competitors entering our
markets.
Many of our competitors and potential competitors have a number of significant advantages over
us, including:
|
|
|
greater financial and manufacturing resources that can be devoted to the
development, production, and sale of their products; |
|
|
|
|
more established and broader sales and marketing channels; |
|
|
|
|
more manufacturing facilities worldwide, some of which are closer in proximity to OEMs; |
22
|
|
|
manufacturing facilities that are located in countries with lower production costs; |
|
|
|
|
lower capacity utilization in peak market conditions that can result in shorter
lead times to customers; |
|
|
|
|
ability to add additional capacity faster or more efficiently; |
|
|
|
|
preferred vendor status with existing and potential customers; |
|
|
|
|
greater name recognition; |
|
|
|
|
manufacturing facilities with U.S. military clearances; and |
|
|
|
|
larger customer bases. |
In addition, these competitors may respond more quickly to new or emerging technologies, or
adapt more quickly to changes in customer requirements, and devote greater resources to the
development, promotion, and sale of their products than we do. We must continually develop improved
manufacturing processes to meet our customers needs for complex products, and our manufacturing
process technology is generally not subject to significant proprietary protection. During
recessionary periods in the electronics industry, our strategy of providing quick-turn services, an
integrated manufacturing solution, and responsive customer service may take on reduced importance
to our customers. As a result, we may need to compete more on the basis of price, which could cause
our gross margins to decline. Periodically, printed circuit board manufacturers experience
overcapacity. Overcapacity, combined with weakness in demand for electronic products, results in
increased competition and price erosion for printed circuit boards.
Our quarterly results of operations are often subject to demand fluctuations and seasonality. With
a high level of fixed operating costs, even small revenue shortfalls would decrease our gross
margins and potentially cause the trading price of our common stock to decline.
Our quarterly results of operations fluctuate for a variety of reasons, including:
|
|
|
timing of orders from and shipments to major customers; |
|
|
|
|
the levels at which we utilize our manufacturing capacity; |
|
|
|
|
price competition; |
|
|
|
|
changes in our mix of revenues generated from quick-turn versus standard delivery time services; |
|
|
|
|
expenditures, charges or write-offs, including those related to acquisitions,
facility restructurings, or asset impairments; and |
|
|
|
|
expenses relating to expanding existing manufacturing facilities. |
A significant portion of our operating expenses is relatively fixed in nature, and planned
expenditures are based in part on anticipated orders. Accordingly, unexpected revenue shortfalls
may decrease our gross margins. In addition, we have experienced sales fluctuations due to seasonal
patterns in the capital budgeting and purchasing cycles as well as inventory management practices
of our customers and the end markets we serve. In particular, the seasonality of the computer
industry and quick-turn ordering patterns affect the overall printed circuit board industry. These
seasonal trends have caused fluctuations in our quarterly operating results in the past and may
continue to do so in the future. Results of operations in any quarterly period should not be
considered indicative of the results to be expected for any future period. In addition, our future
quarterly operating results may fluctuate and may not meet the expectations of securities analysts
or investors. If this occurs, the trading price of our common stock would likely decline.
23
Because we sell on a purchase order basis, we are subject to uncertainties and variability in
demand by our customers that could decrease revenues and harm our operating results.
We sell to customers on a purchase order basis rather than pursuant to long-term contracts.
Our quick-turn orders are subject to particularly short lead times. Consequently, our net sales are
subject to short-term variability in demand by our customers. Customers submitting purchase orders
may cancel, reduce, or delay their orders for a variety of reasons. The level and timing of orders
placed by our customers may vary, due to:
|
|
|
customer attempts to manage inventory; |
|
|
|
|
changes in customers manufacturing strategies, such as a decision by a
customer to either diversify or consolidate the number of printed circuit board
manufacturers used or to manufacture its own products internally; |
|
|
|
|
variation in demand for our customers products; and |
|
|
|
|
changes in new product introductions. |
We have periodically experienced terminations, reductions, and delays in our customers
orders. Further terminations, reductions, or delays in our customers orders could harm our
business, results of operations, and financial condition.
The increasing prominence of EMS providers in the printed circuit board industry could reduce our
gross margins, potential sales, and customers.
Sales to EMS providers represented approximately 69% of our net sales in 2005 and
approximately 67% of our net sales in the first fiscal quarter 2006. Sales to EMS providers
include sales directed by OEMs as well as orders placed with us at the EMS providers discretion.
EMS providers source on a global basis to a greater extent than OEMs. The growth of EMS providers
increases the purchasing power of such providers and could result in increased price competition or
the loss of existing OEM customers. In addition, some EMS providers, including some of our
customers, have the ability to directly manufacture printed circuit boards. If a significant number
of our other EMS customers were to acquire the ability to directly manufacture printed circuit
boards, our customer base might shrink, and our sales might decline substantially. Moreover, if any
of our OEM customers outsource the production of printed circuit boards to these EMS providers, our
business, results of operations, and financial condition may be harmed.
If we were to increase our amortization of definite-lived intangible assets as a result of
additional acquisitions, our earnings could be negatively affected. Similarly, if we were to
revalue our existing intangible assets downward, our operating results would be harmed.
As of April 3, 2006, our consolidated balance sheet reflected $73.1 million of goodwill and
intangible assets. We evaluate whether events and circumstances have occurred that indicate the
remaining balance of goodwill and intangible assets may not be recoverable. When factors indicate
that assets should be evaluated for possible impairment, we may be required to reduce the carrying
value of our goodwill and intangible assets, which could harm our results during the periods in
which such a reduction is recognized. Our goodwill and intangible assets may increase in future
periods if we consummate other acquisitions. Amortization or impairment of these additional
intangibles would, in turn, harm our earnings.
Damage to our manufacturing facilities could increase our costs of doing business and adversely
affect our ability to deliver our manufacturing services on a timely basis.
We have three manufacturing facilities, which are located in Chippewa Falls, Wisconsin;
Redmond, Washington; and Santa Ana, California. The destruction or closure of any of our
manufacturing facilities for a significant period of time as a result of fire; explosion; blizzard;
act of war or terrorism; or flood, tornado, earthquake, lightning, or other natural disaster could
increase our costs of doing business and harm our ability to deliver our manufacturing services on
a timely basis and, consequently, our operating results.
24
Our manufacturing processes depend on the collective industry experience of our employees. If these
employees were to leave us, our manufacturing processes might suffer and we might not be able to
compete effectively.
We have limited patent or trade secret protection for our manufacturing processes. We rely on
the collective experience of our employees in the manufacturing processes to ensure we continuously
evaluate and adopt new technologies in our industry. Although we are not dependent on any one
employee or a small number of employees, if a significant number of our employees involved in our
manufacturing processes were to leave our employment, and we were not able to replace these people
with new employees with comparable experience, our manufacturing processes might suffer as we might
be unable to keep up with innovations in the industry. As a result, we may lose our ability to
continue to compete effectively.
We may be exposed to intellectual property infringement claims by third parties that could be
costly to defend, could divert managements attention and resources, and if successful, could
result in liability.
We could be subject to legal proceedings and claims for alleged infringement by us of
third-party proprietary rights, such as patents, from time to time in the ordinary course of
business. It is possible that the circuit board designs and other specifications supplied to us by
our customers might infringe on the patents or other intellectual property rights of third parties,
in which case our manufacture of printed circuit boards according to such designs and
specifications could expose us to legal proceedings for allegedly aiding and abetting the
violation, as well as to potential liability for the infringement. If we do not prevail in any
litigation as a result of any such allegations, our business could be harmed.
Our business may suffer if any of our key senior executives discontinues employment with us or if
we are unable to recruit and retain highly skilled engineering and sales staff.
Our future success depends to a large extent on the services of our key managerial employees.
We may not be able to retain our executive officers and key personnel or attract additional
qualified management in the future. Our business also depends on our continuing ability to recruit,
train, and retain highly qualified employees, particularly engineering and sales and marketing
personnel. The competition for these employees is intense, and the loss of these employees could
harm our business. Further, our ability to successfully integrate acquired companies depends in
part on our ability to retain key management and existing employees at the time of the acquisition.
Increasingly, our larger customers are requesting that we enter into supply agreements with them
that usually have increasingly restrictive terms and conditions. These agreements typically
include provisions that increase our financial exposure, which could result in significant costs to
us.
Increasingly, our larger customers are requesting that we enter into supply agreements with
them. These agreements typically include provisions that generally serve to increase our exposure
for product liability and warranty claims as compared to our standard invoice terms which
could result in higher costs to us as a result of such claims. In addition, these agreements
typically contain provisions that seek to limit our operational and pricing flexibility and extend
payment terms, which can adversely impact our cash flow and results of operations.
25
Products we manufacture may contain design or manufacturing defects, which could result in reduced
demand for our services and liability claims against us.
We manufacture products to our customers specifications, which are highly complex and may
contain design or manufacturing errors or failures, despite our quality control and quality
assurance efforts. Defects in the products we manufacture, whether caused by a design,
manufacturing, or materials failure or error, may result in delayed shipments, customer
dissatisfaction, a reduction or cancellation of purchase orders, or liability claims against us. If
these defects occur either in large quantities or too frequently, our business reputation may be
impaired. Our sales mix has shifted towards standard delivery time products, which have larger
production runs, thereby increasing our exposure to these types of defects. Since our products are
used in products that are integral to our customers businesses, errors, defects, or other
performance problems could result in financial or other damages to our customers beyond the cost of
the printed circuit board, for which we may be liable. Although our invoices and sales arrangements
generally contain provisions designed to limit our exposure to product liability and related
claims, existing or future laws or unfavorable judicial decisions could negate these limitation of
liability provisions. Product liability litigation against us, even if it were unsuccessful, would
be time consuming and costly to defend. Although we maintain technology errors and omissions
insurance, we cannot assure you that we will continue to be able to purchase such insurance
coverage in the future on terms that are satisfactory to us, if at all.
Our failure to comply with the requirements of environmental laws could result in fines and
revocation of permits necessary to our manufacturing processes.
Our operations are regulated under a number of federal, state, and foreign environmental and
safety laws and regulations that govern, among other things, the discharge of hazardous materials
into the air and water, as well as the handling, storage, and disposal of such materials. These
laws and regulations include the Clean Air Act, the Clean Water Act, the Resource Conservation and
Recovery Act, and the Comprehensive Environmental Response, Compensation and Liability Act, as well
as analogous state and foreign laws. Compliance with these environmental laws is a major
consideration for us because our manufacturing processes use and generate materials classified as
hazardous, such as ammoniacal etching solutions, copper, and nickel. Because we use hazardous
materials and generate hazardous wastes in our manufacturing processes, we may be subject to
potential financial liability for costs associated with the investigation and remediation of our
own sites, or sites at which we have arranged for the disposal of hazardous wastes, if such sites
become contaminated. Even if we fully comply with applicable environmental laws and are not
directly at fault for the contamination, we may still be liable. The wastes we generate include
spent ammoniacal etching solutions, metal stripping solutions, and hydrochloric acid solution
containing palladium; waste water, which contains heavy metals, acids, cleaners, and conditioners;
and filter cake from equipment used for on-site waste treatment. We believe that our operations
substantially comply with all applicable environmental laws. However, any material violations of
environmental laws by us could subject us to revocation of our effluent discharge permits. Any such
revocations could require us to cease or limit production at one or more of our facilities, and
harm our business, results of operations, and financial condition. Even if we ultimately prevail,
environmental lawsuits against us would be time consuming and costly to defend.
Environmental laws could also become more stringent over time, imposing greater compliance
costs and increasing risks and penalties associated with violation. We operate in environmentally
sensitive locations, and we are subject to potentially conflicting and changing regulatory agendas
of political, business, and environmental groups. Changes or restrictions on discharge limits,
emissions levels, material storage, handling, or disposal might require a high level of unplanned
capital investment or global relocation. It is possible that environmental compliance costs and
penalties from new or existing regulations may harm our business, results of operations, and
financial condition.
In addition, we are increasingly required to certify compliance with the European Union
Restriction of Hazardous Substances (RoHS) directive for some of the products that we
manufacture. As with other types of product certifications that we routinely provide, we may incur
liability and pay damages if our products do not conform to our certification.
26
If our net earnings do not remain at or above recent levels, or we are not able to predict with a
reasonable degree of probability that they will continue, we may have to record an additional
valuation allowance against our net deferred tax assets.
As of April 3, 2006, we had net deferred tax assets of approximately $8.2 million, which is
net of a valuation allowance of $2.5 million. If we should determine that it is more likely than
not that we will not generate taxable income in sufficient amounts to be able to use our net
deferred tax assets, we would be required to increase our current valuation allowance against these
deferred tax assets. This would result in an additional income tax provision and a deterioration of
our results of operations. Based on our forecast for future earnings, we believe we will utilize
the deferred tax asset in future periods. However, if our estimates of future earnings are lower
than expected, we may record a higher income tax provision due to a write down of our net deferred
tax assets, which would reduce our earnings per share.
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds
Not Applicable
Item 3. Defaults Upon Senior Securities
Not Applicable
Item 4. Submission of Matters to a Vote of Security Holders
Not Applicable
Item 5. Other Information
Not Applicable
Item 6. Exhibits
|
|
|
Exhibit |
|
|
Number |
|
Exhibits |
|
31.1
|
|
CEO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002. |
31.2
|
|
CFO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002. |
32.1
|
|
CEO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002. |
32.2
|
|
CFO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002. |
27
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused
this report to be signed on its behalf by the undersigned thereunto duly authorized.
|
|
|
|
|
TTM Technologies, Inc. |
|
|
|
Dated: May 12, 2006
|
|
/s/ Kenton K. Alder |
|
|
|
|
|
Kenton K. Alder |
|
|
President and Chief Executive Officer |
|
|
|
Dated: May 12, 2006
|
|
/s/ Steven W. Richards |
|
|
|
|
|
Steven W. Richards |
|
|
Chief Financial Officer and Secretary |
28
Exhibit Index
|
|
|
Exhibit |
|
|
Number |
|
Exhibits |
|
31.1
|
|
CEO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002. |
31.2
|
|
CFO Certification Pursuant to Section 302 of the Sarbanes Oxley Act of 2002. |
32.1
|
|
CEO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002. |
32.2
|
|
CFO Certification Pursuant to Section 906 of the Sarbanes Oxley Act of 2002. |
29